class TestsphereHardS(unittest.TestCase):
"""
Unit tests for SphereModel(Q) * HardsphereStructure(Q)
"""
def setUp(self):
from sas.models.SphereModel import SphereModel
from sas.models.HardsphereStructure import HardsphereStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = SphereModel()
self.model2 = HardsphereStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
#Radius of model1.calculate_ER should be equal to the output/2 of DiamFunctions
def test_multplication_radius(self):
"""
test multiplication model (check the effective radius & the output
of the multiplication)
"""
self.model.setParam("radius", 60)
modelDrun = 60
self.model2.setParam("volfraction", 0.2)
self.model2.setParam("effect_radius", modelDrun )
#Compare new method with old method
self.assertEqual(self.model3.run(0.1), self.model.run(0.1)*self.model2.run(0.1))
#Compare radius from two different calculations. Note: modelD.run(0.0) is DIAMETER
self.assertEqual(self.model.calculate_ER(), modelDrun)
def testMultiplicationParam(self):
""" Test Multiplication (check the parameters)"""
## test details dictionary
## test parameters list
list3= self.model3.getParamList()
for item in self.model.getParamList():
if not 'scale' in item:
self.assert_(item in list3)
for item in self.model2.getParamList():
#model3 parameters should not include effect_radius*
if not 'effect_radius' in item:
self.assert_(item in list3)
## test set value for parameters and get paramaters
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.model3.setParam("radius", 20)
self.assertEqual(self.model3.getParam("radius"), 20)
self.model3.setParam("radius.width", 15)
self.assertEqual(self.model3.getParam("radius.width"), 15)
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.assertEqual(self.model3.getParam("volfraction"), self.model.getParam("scale"))
## Dispersity
list3= self.model3.getDispParamList()
self.assertEqual(list3, ['radius.npts', 'radius.nsigmas', 'radius.width'])
from sas.models.dispersion_models import ArrayDispersion
disp_th = ArrayDispersion()
values_th = numpy.zeros(100)
weights = numpy.zeros(100)
for i in range(100):
values_th[i]=(math.pi/99.0*i)
weights[i]=(1.0)
disp_th.set_weights(values_th, weights)
self.model3.set_dispersion('radius', disp_th)
val_1d = self.model3.run(math.sqrt(0.0002))
val_2d = self.model3.runXY([0.01,0.01])
self.assertTrue(math.fabs(val_1d-val_2d)/val_1d < 0.02)
model4= self.model3.clone()
self.assertEqual(model4.getParam("radius"), 20)
def test_cyl_times_square(self):
""" Simple cylinder model fit """
out=Loader().load("cyl_400_20.txt")
data = Data1D(x=out.x, y=out.y, dx=out.dx, dy=out.dy)
# Receives the type of model for the fitting
model1 = MultiplicationModel(CylinderModel(),SquareWellStructure())
model1.setParam('background', 0.0)
model1.setParam('sldCyl', 3e-006)
model1.setParam('sldSolv', 0.0)
model1.setParam('length', 420)
model1.setParam('radius', 40)
model1.setParam('scale_factor', 2)
model1.setParam('volfraction', 0.04)
model1.setParam('welldepth', 1.5)
model1.setParam('wellwidth', 1.2)
model = Model(model1)
pars1 =['length','radius','scale_factor']
fitter = Fit()
fitter.set_data(data,1)
fitter.set_model(model,1,pars1)
fitter.select_problem_for_fit(id=1,value=1)
result1, = fitter.fit()
self.assert_(result1)
self.assertTrue(len(result1.pvec)>=0 )
self.assertTrue(len(result1.stderr)>= 0)
#print "results",list(zip(result1.pvec, result1.stderr))
self.assertTrue( math.fabs(result1.pvec[0]-612)/3.0 <= result1.stderr[0] )
self.assertTrue( math.fabs(result1.pvec[1]-20.3)/3.0 <= result1.stderr[1] )
self.assertTrue( math.fabs(result1.pvec[2]-25)/3.0 <= result1.stderr[2] )
self.assertTrue( result1.fitness/len(data.x) < 1.0 )
class TestsphereHardS(unittest.TestCase):
"""
Unit tests for SphereModel(Q) * HardsphereStructure(Q)
"""
def setUp(self):
from sas.models.SphereModel import SphereModel
from sas.models.HardsphereStructure import HardsphereStructure
from sas.models.DiamCylFunc import DiamCylFunc
from sas.models.MultiplicationModel import MultiplicationModel
self.model = SphereModel()
self.model2 = HardsphereStructure()
self.model3 = MultiplicationModel(self.model, self.model2)
self.modelD = DiamCylFunc()
#Radius of model1.calculate_ER should be equal to the output/2 of DiamFunctions
def test_multplication_radius(self):
"""
test multiplication model (check the effective radius & the output
of the multiplication)
"""
self.model.setParam("radius", 60)
modelDrun = 60
self.model2.setParam("volfraction", 0.2)
self.model2.setParam("effect_radius", modelDrun )
#Compare new method with old method
self.assertEqual(self.model3.run(0.1), self.model.run(0.1)*self.model2.run(0.1))
#Compare radius from two different calculations. Note: modelD.run(0.0) is DIAMETER
self.assertEqual(self.model.calculate_ER(), modelDrun)
def testMultiplicationParam(self):
""" Test Multiplication (check the parameters)"""
## test details dictionary
## test parameters list
list3= self.model3.getParamList()
for item in self.model.getParamList():
if not 'scale' in item:
self.assert_(item in list3)
for item in self.model2.getParamList():
#model3 parameters should not include effect_radius*
if not 'effect_radius' in item:
self.assert_(item in list3)
## test set value for parameters and get paramaters
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.model3.setParam("radius", 20)
self.assertEqual(self.model3.getParam("radius"), 20)
self.model3.setParam("radius.width", 15)
self.assertEqual(self.model3.getParam("radius.width"), 15)
self.model3.setParam("scale_factor", 15)
self.assertEqual(self.model3.getParam("scale_factor"), 15)
self.assertEqual(self.model3.getParam("volfraction"), self.model.getParam("scale"))
## Dispersity
list3= self.model3.getDispParamList()
self.assertEqual(list3, ['radius.npts', 'radius.nsigmas', 'radius.width'])
from sas.models.dispersion_models import ArrayDispersion
disp_th = ArrayDispersion()
values_th = numpy.zeros(100)
weights = numpy.zeros(100)
for i in range(100):
values_th[i]=(math.pi/99.0*i)
weights[i]=(1.0)
disp_th.set_weights(values_th, weights)
self.model3.set_dispersion('radius', disp_th)
val_1d = self.model3.run(math.sqrt(0.0002))
val_2d = self.model3.runXY([0.01,0.01])
self.assertTrue(math.fabs(val_1d-val_2d)/val_1d < 0.02)
model4= self.model3.clone()
self.assertEqual(model4.getParam("radius"), 20)