Exemplo n.º 1
0
    def addWatermark(self):
        '''Create a Draft watermark layer. This was taken from:
			http://wiki.scribus.net/canvas/Adding_%27DRAFT%27_to_a_document'''

        L = len(self.watermark)  # The length of the word
        # will determine the font size
        scribus.defineColor("gray", 11, 11, 11, 11)  # Set your own color here

        u = scribus.getUnit()  # Get the units of the document
        al = scribus.getActiveLayer()  # Identify the working layer
        scribus.setUnit(
            scribus.UNIT_MILLIMETERS)  # Set the document units to mm,
        (w, h) = scribus.getPageSize()  # needed to set the text box size

        scribus.createLayer("c")
        scribus.setActiveLayer("c")

        T = scribus.createText(w / 6, 6 * h / 10, h,
                               w / 2)  # Create the text box
        scribus.setText(self.watermark, T)  # Insert the text
        scribus.setTextColor("gray", T)  # Set the color of the text
        scribus.setFontSize(
            (w / 210) * (180 - 10 * L),
            T)  # Set the font size according to length and width

        scribus.rotateObject(45, T)  # Turn it round antclockwise 45 degrees
        scribus.setUnit(u)  # return to original document units
        # FIXME: It would be nice if we could move the watermark box down to the lowest layer so
        # that it is under all the page text. Have not found a method to do this. For now we just
        # plop the watermark on top of everything else.
        scribus.setActiveLayer(al)  # return to the original active layer
Exemplo n.º 2
0
    def addWatermark (self) :
        '''Create a Draft watermark layer. This was taken from:
            http://wiki.scribus.net/canvas/Adding_%27DRAFT%27_to_a_document'''

        L = len(self.watermark)                         # The length of the word 
                                                        # will determine the font size
        scribus.defineColor("gray", 11, 11, 11, 11)     # Set your own color here

        u  = scribus.getUnit()                          # Get the units of the document
        al = scribus.getActiveLayer()                   # Identify the working layer
        scribus.setUnit(scribus.UNIT_MILLIMETERS)       # Set the document units to mm,
        (w,h) = scribus.getPageSize()                   # needed to set the text box size

        scribus.createLayer("c")
        scribus.setActiveLayer("c")

        T = scribus.createText(w/6, 6*h/10 , h, w/2)    # Create the text box
        scribus.setText(self.watermark, T)              # Insert the text
        scribus.setTextColor("gray", T)                 # Set the color of the text
        scribus.setFontSize((w/210)*(180 - 10*L), T)    # Set the font size according to length and width

        scribus.rotateObject(45, T)                     # Turn it round antclockwise 45 degrees
        scribus.setUnit(u)                              # return to original document units
# FIXME: It would be nice if we could move the watermark box down to the lowest layer so 
# that it is under all the page text. Have not found a method to do this. For now we just
# plop the watermark on top of everything else.
        scribus.setActiveLayer(al)                      # return to the original active layer
This script moves all images to a new layer called "Ghostlayer",
the idea being that you can show/hide, print-export/not as desired.
 
"""
import scribus

if scribus.haveDoc():

    fantome = "Ghostlayer"
    scribus.createLayer(fantome)
    working = scribus.getActiveLayer()
    page = 1
    pagenum = scribus.pageCount()
    while (page <= pagenum):
        scribus.gotoPage(page)
        scribus.setActiveLayer(working)  # maybe not necessary?
        pageitems = scribus.getPageItems()

        for item in pageitems:
            if (item[1] == 2):
                imagebox = item[0]
                scribus.selectObject(imagebox)
                scribus.copyObject(imagebox)
                scribus.setActiveLayer(fantome)
                scribus.pasteObject(imagebox)
                scribus.deleteObject(imagebox)
                scribus.setActiveLayer(working)
        page += 1
    scribus.setLayerPrintable(fantome,
                              0)  # comment this out to do manually later
    scribus.setLayerVisible(fantome,
Exemplo n.º 4
0
def main(argv):

    scribus.setUnit(scribus.UNIT_MILLIMETERS)

    # get page size
    pagesize = scribus.getPageSize()

    ###########################################

    # size and position of the exit buttons
    linksize = pagesize[0] / 30
    linkpos = pagesize[0] - linksize - 2

    # set up exit to page
    pagenum = scribus.pageCount()
    exittopage = scribus.valueDialog(
        "Exit to page",
        "Exit buttons should go to page (1-" + str(pagenum) + ") :", "1")

    #error
    #if exittopage > pagenum:
    #    scribus.messageBox("Error", "This page doesn't exist.")
    #    sys.exit()

    # get active layer, create new layer for exit buttons, set it as active
    activelayer = scribus.getActiveLayer()
    scribus.createLayer("Exitbuttons")
    scribus.setActiveLayer("Exitbuttons")

    #progressbar max
    scribus.progressTotal(pagenum)

    # iterate through all the pages
    page = 1
    while (page <= pagenum):

        #messagebar text
        scribus.messagebarText("Create exit buttons...")

        scribus.progressSet(page)
        scribus.gotoPage(page)

        # create rectangle
        exitrect = scribus.createRect(linkpos, 2, linksize, linksize,
                                      "exitrect" + str(page))
        scribus.setFillColor("White", exitrect)

        # create text in rectangle
        exittext = scribus.createText(linkpos, 4, linksize, linksize,
                                      "exittext" + str(page))

        scribus.setText("X", exittext)
        scribus.setFontSize(20, exittext)
        scribus.setTextAlignment(1, exittext)

        # create link annotation
        exitlink = scribus.createText(linkpos, 2, linksize, linksize,
                                      "exitlink" + str(page))
        #setLinkAnnotation(page,x,y,["name"])
        scribus.setLinkAnnotation(int(exittopage), 0, 0, exitlink)

        # add page number to iteration
        page += 1

    # go back to active layer
    scribus.setActiveLayer(activelayer)
   import scribus
except ImportError:
   print "This script only works from within Scribus"
   sys.exit(1)


unit_current=scribus.getUnit() #get unit and change it to mm
scribus.setUnit(scribus.UNIT_MILLIMETERS)

page = scribus.getPageSize()
margin = scribus.getPageMargins()

layer = scribus.getActiveLayer()

if ('guides' in scribus.getLayers()) :
    scribus.setActiveLayer('guides')
else:
    scribus.createLayer('guides')


# add the baseline grid (when it's not too close to a guide)
baseline_start = 0 # in mm
baseline = 14.4 # in pt

multiplicator = 10000
baseline = int(baseline * 0.352777 * multiplicator) # 14.4 pt in mm
#baseline = int(baseline * 0.351459 * multiplicator) # 14.4 pt in mm

if baseline > 0 :
  guide_i = 0
  guide_list = scribus.getHGuides()
    # add a "crossed frame" for missing images
    for item in scribus.getAllObjects():
        if scribus.getObjectType(item) == 'ImageFrame':
            image = scribus.getImageFile(item)
            if image == '':
                pos = scribus.getPosition(item)
                size = scribus.getSize(item)
                rectangle = scribus.createRect(pos[0], pos[1], size[0], size[1])
                scribus.setFillColor('none', rectangle)
                scribus.setLineColor('Black', rectangle)
                scribus.setLineWidth(0.4, rectangle)
                line = scribus.createLine(pos[0], pos[1] , pos[0] + size[0], pos[1] + size[1])
                scribus.setLineColor('Black', line)
                scribus.setLineWidth(0.4, line)
                line = scribus.createLine(pos[0], pos[1] + size[1], pos[0] + size[0], pos[1])
                scribus.setLineColor('Black', line)
                scribus.setLineWidth(0.4, line)

layer = scribus.getActiveLayer()

if ('placeholder' in scribus.getLayers()) :
    scribus.setActiveLayer('placeholder')
else:
    scribus.createLayer('placeholder')

for page in range(1, scribus.pageCount() + 1):
    scribus.gotoPage(page)
    drawPlaceholders()

scribus.setActiveLayer(layer)
def main(argv):

    ###########################################

    scribus.newDocDialog()

    if scribus.haveDoc:
        scribus.setUnit(scribus.UNIT_MILLIMETERS)
        (w, h) = scribus.getPageSize()

        ###################

        # ask for workdir
        workdir = scribus.fileDialog("Open directory with images",
                                     "",
                                     haspreview=False,
                                     issave=False,
                                     isdir=True)
        #workdir = "/media/sda7/StudioSession3/PDFTools/pics"
        #workdir = "/media/sda7/ISG/Itex/PhotoVisit/Boilerroom"

        # file filter
        filefilter = scribus.valueDialog(
            "File filter",
            "File filter examples: \n\n* or *.* = add all files\n*.jpg = add .jpg files only\nIMG_*.* = add all files starting with IMG_\n\nThis filter is case sensitive!",
            "*.*")

        # get image paths
        filelist = sorted(glob.glob(os.path.join(workdir, filefilter)))
        #scribus.messageBox("Help", str(filelist))

        # count files
        filesinworkdir = len(filelist)
        #scribus.messageBox("Help", str(filesinworkdir))

        #messagebar text
        scribus.messagebarText("Importing images...")

        #error
        if filesinworkdir == 0:
            scribus.messageBox("Error", "This directory is empty.")
            sys.exit()

        # add filename text?
        addfilenames = scribus.messageBox("Import images",
                                          "Files found in workdir : " +
                                          str(filesinworkdir) +
                                          "\n\nAdd file names to images?",
                                          button1=scribus.BUTTON_YES,
                                          button2=scribus.BUTTON_NO)

        #create text layer
        if addfilenames == 16384:
            activelayer = scribus.getActiveLayer()
            scribus.createLayer("Filenames")
            scribus.setActiveLayer(activelayer)

        #progressbar max
        scribus.progressTotal(filesinworkdir)

        page = 1

        #create page, add and load image
        for i in filelist:
            scribus.progressSet(page)

            scribus.gotoPage(page)
            scribus.createImage(0, 0, w, h, "imagename" + str(page))
            scribus.loadImage(filelist[page - 1], "imagename" + str(page))
            scribus.setScaleImageToFrame(True,
                                         proportional=True,
                                         name="imagename" + str(page))
            #scribus.setImageOffset(0, 0, "imagename"+str(page))
            #scribus.setScaleFrameToImage(name="imagename"+str(page))

            # add filename on page?
            if addfilenames == 16384:
                scribus.setActiveLayer("Filenames")
                filename = scribus.createText(2, 2, 50, 10, filelist[page - 1])
                scribus.setText(os.path.basename(filelist[page - 1]), filename)
                scribus.setTextColor("White", filename)
                scribus.setActiveLayer(activelayer)

            scribus.newPage(-1)
            page += 1

        #delete last blank page
        scribus.deletePage(filesinworkdir + 1)
This script moves all images to a new layer called "Ghostlayer",
the idea being that you can show/hide, print-export/not as desired.
 
"""
import scribus
 
if scribus.haveDoc():
 
  fantome = "Ghostlayer"
  scribus.createLayer(fantome)
  working = scribus.getActiveLayer()
  page = 1
  pagenum = scribus.pageCount()
  while (page <= pagenum):
    scribus.gotoPage(page)
    scribus.setActiveLayer(working)  # maybe not necessary?  
    pageitems = scribus.getPageItems()
 
    for item in pageitems:
      if (item[1] == 2):
	imagebox = item[0]
	scribus.selectObject(imagebox)
	scribus.copyObject(imagebox)
	scribus.setActiveLayer(fantome)
	scribus.pasteObject(imagebox)
	scribus.deleteObject(imagebox)
	scribus.setActiveLayer(working)
    page += 1
  scribus.setLayerPrintable(fantome, 0)  # comment this out to do manually later
  scribus.setLayerVisible(fantome, 0)    # comment this out to do manually later
  scribus.setRedraw(1)
Exemplo n.º 9
0
            if image == '':
                pos = scribus.getPosition(item)
                size = scribus.getSize(item)
                rectangle = scribus.createRect(pos[0], pos[1], size[0],
                                               size[1])
                scribus.setFillColor('none', rectangle)
                scribus.setLineColor('Black', rectangle)
                scribus.setLineWidth(0.4, rectangle)
                line = scribus.createLine(pos[0], pos[1], pos[0] + size[0],
                                          pos[1] + size[1])
                scribus.setLineColor('Black', line)
                scribus.setLineWidth(0.4, line)
                line = scribus.createLine(pos[0], pos[1] + size[1],
                                          pos[0] + size[0], pos[1])
                scribus.setLineColor('Black', line)
                scribus.setLineWidth(0.4, line)


layer = scribus.getActiveLayer()

if ('placeholder' in scribus.getLayers()):
    scribus.setActiveLayer('placeholder')
else:
    scribus.createLayer('placeholder')

for page in range(1, scribus.pageCount() + 1):
    scribus.gotoPage(page)
    drawPlaceholders()

scribus.setActiveLayer(layer)
def main(argv):

    scribus.setUnit(scribus.UNIT_MILLIMETERS)

    # get page size and page count
    pagesize = scribus.getPageSize()
    pagenum = scribus.pageCount()

    #create on page
    selectedpage = scribus.valueDialog(
        "Select page", "Create arrows and annotation links on page (1-" +
        str(pagenum) + ") :", "1")

    # get active layer, create new layer for exit buttons, set it as active
    #activelayer = scribus.getActiveLayer()
    scribus.createLayer("Arrowlinks")
    scribus.setActiveLayer("Arrowlinks")

    #progressbar max
    scribus.progressTotal(pagenum)

    arrowinitxpos = 10
    arrowinitypos = 30

    scribus.gotoPage(int(selectedpage))

    page = 1
    ###########################################

    for i in range(pagenum):
        # create rectangle
        #exitrect = scribus.createRect(arrowinitxpos, 50, 30, 30, "exitrect")

        #messagebar text
        scribus.messagebarText(
            "Creating arrows and annotation links on page " + selectedpage +
            "...")

        #progress bar
        scribus.progressSet(page)

        #create and distribute arrow
        arrowpoly = [
            10, 30, 30, 10, 50, 30, 40, 30, 40, 50, 20, 50, 20, 30, 10, 30
        ]
        arrowup = scribus.createPolygon(arrowpoly)
        scribus.sizeObject(10, 10, arrowup)
        scribus.moveObjectAbs(arrowinitxpos, arrowinitypos, arrowup)
        scribus.setFillColor("White", arrowup)

        #create and distribute links
        arrowlink = scribus.createText(arrowinitxpos, arrowinitypos + 11, 10,
                                       10, "link_to_page_" + str(page))
        #setLinkAnnotation(page,x,y,["name"])
        scribus.setLinkAnnotation(int(page), 0, 0, arrowlink)

        arrowinitxpos += 11

        if arrowinitxpos > 250:
            arrowinitypos += 24
            arrowinitxpos = 10

        # add page number to iteration
        page += 1