def __init__(self, fil_filenm, box):
self.fil_filenm = fil_filenm
self.basefilenm = fil_filenm.rstrip(".sig")
#self.beam = int(self.basefilenm[-1])
self.beam = int(self.basefilenm)
filhdr, self.hdrlen = sigproc.read_header(fil_filenm)
self.orig_filenm = filhdr['rawdatafile']
self.MJD = filhdr['tstart']
self.nchans = filhdr['nchans']
self.ra_rad = sigproc.ra2radians(filhdr['src_raj'])
self.ra_string = psr_utils.coord_to_string(\
*psr_utils.rad_to_hms(self.ra_rad))
self.dec_rad = sigproc.dec2radians(filhdr['src_dej'])
self.dec_string = psr_utils.coord_to_string(\
*psr_utils.rad_to_dms(self.dec_rad))
self.az = filhdr['az_start']
self.el = 90.0-filhdr['za_start']
self.BW = abs(filhdr['foff']) * filhdr['nchans']
self.dt = filhdr['tsamp']
self.orig_N = sigproc.samples_per_file(fil_filenm, filhdr, self.hdrlen)
self.orig_T = self.orig_N * self.dt
self.N = choose_N(self.orig_N)
#self.N = 2097152
self.T = self.N * self.dt
# Update the RA and DEC from the database file if required
#newposn = read_db_posn(self.orig_filenm, self.beam)
#if newposn is not None:
# self.ra_string, self.dec_string = newposn
# ... and use them to update the filterbank file
# fix_fil_posn(fil_filenm, self.hdrlen,
# self.ra_string, self.dec_string)
# Determine the average barycentric velocity of the observation
#self.baryv = get_baryv(self.ra_string, self.dec_string,
# self.MJD, self.T, obs="NC")
# Where to dump all the results
# Directory structure is under the base_output_directory
# according to base/MJD/filenmbase/beam
self.outputdir = os.path.join(base_output_directory,box,
self.basefilenm)
# Figure out which host we are processing on
self.hostname = socket.gethostname()
# The fraction of the data recommended to be masked by rfifind
self.masked_fraction = 0.0
# Initialize our timers
self.rfifind_time = 0.0
self.downsample_time = 0.0
self.subbanding_time = 0.0
self.dedispersing_time = 0.0
self.FFT_time = 0.0
self.lo_accelsearch_time = 0.0
self.hi_accelsearch_time = 0.0
self.singlepulse_time = 0.0
self.sifting_time = 0.0
self.folding_time = 0.0
self.total_time = 0.0
# Inialize some candidate counters
self.num_sifted_cands = 0
self.num_folded_cands = 0
self.num_single_cands = 0
self.nb_sp = 0
def __init__(self, fil_filenm):
self.fil_filenm = fil_filenm
self.basefilenm = fil_filenm[:fil_filenm.find(".fil")]
filhdr, hdrlen = sigproc.read_header(fil_filenm)
self.MJD = filhdr['tstart']
self.nchans = filhdr['nchans']
self.ra_rad = sigproc.ra2radians(filhdr['src_raj'])
self.ra_string = pu.coord_to_string(*pu.rad_to_hms(self.ra_rad))
self.dec_rad = sigproc.dec2radians(filhdr['src_dej'])
self.dec_string = pu.coord_to_string(*pu.rad_to_dms(self.dec_rad))
self.str_coords = "J" + "".join(self.ra_string.split(":")[:2])
if self.dec_rad >= 0.0: self.str_coords += "+"
self.str_coords += "".join(self.dec_string.split(":")[:2])
self.az = filhdr['az_start']
self.el = 90.0 - filhdr['za_start']
fillen = os.stat(fil_filenm)[6]
self.raw_N = (fillen - hdrlen) / (filhdr['nbits'] /
8) / filhdr['nchans']
self.dt = filhdr['tsamp']
self.raw_T = self.raw_N * self.dt
self.N = orig_N
self.T = self.N * self.dt
# Determine the average barycentric velocity of the observation
self.baryv = get_baryv(self.ra_string,
self.dec_string,
self.MJD,
self.T,
obs="GB")
# Where to dump all the results
# Directory structure is under the base_output_directory
# according to base/MJD/filenmbase/beam
self.outputdir = os.path.join(base_output_dir, str(int(self.MJD)),
self.str_coords)
# Figure out which host we are processing on
self.hostname = socket.gethostname()
# The fraction of the data recommended to be masked by rfifind
self.masked_fraction = 0.0
# Initialize our timers
self.rfifind_time = 0.0
self.downsample_time = 0.0
self.dedispersing_time = 0.0
self.FFT_time = 0.0
self.lo_accelsearch_time = 0.0
self.hi_accelsearch_time = 0.0
self.singlepulse_time = 0.0
self.sifting_time = 0.0
self.folding_time = 0.0
self.total_time = 0.0
# Inialize some candidate counters
self.num_sifted_cands = 0
self.num_folded_cands = 0
self.num_single_cands = 0
def __init__(self, fil_filenm):
self.fil_filenm = fil_filenm
self.basefilenm = fil_filenm[:fil_filenm.find(".fil")]
filhdr, hdrlen = sigproc.read_header(fil_filenm)
self.MJD = filhdr['tstart']
self.nchans = filhdr['nchans']
self.ra_rad = sigproc.ra2radians(filhdr['src_raj'])
self.ra_string = pu.coord_to_string(*pu.rad_to_hms(self.ra_rad))
self.dec_rad = sigproc.dec2radians(filhdr['src_dej'])
self.dec_string = pu.coord_to_string(*pu.rad_to_dms(self.dec_rad))
self.str_coords = "J"+"".join(self.ra_string.split(":")[:2])
if self.dec_rad >= 0.0: self.str_coords += "+"
self.str_coords += "".join(self.dec_string.split(":")[:2])
self.az = filhdr['az_start']
self.el = 90.0-filhdr['za_start']
fillen = os.stat(fil_filenm)[6]
self.raw_N = (fillen-hdrlen)/(filhdr['nbits']/8)/filhdr['nchans']
self.dt = filhdr['tsamp']
self.raw_T = self.raw_N * self.dt
self.N = orig_N
self.T = self.N * self.dt
# Determine the average barycentric velocity of the observation
self.baryv = get_baryv(self.ra_string, self.dec_string,
self.MJD, self.T, obs="GB")
# Where to dump all the results
# Directory structure is under the base_output_directory
# according to base/MJD/filenmbase/beam
self.outputdir = os.path.join(base_output_dir,
str(int(self.MJD)),
self.str_coords)
# Figure out which host we are processing on
self.hostname = socket.gethostname()
# The fraction of the data recommended to be masked by rfifind
self.masked_fraction = 0.0
# Initialize our timers
self.rfifind_time = 0.0
self.downsample_time = 0.0
self.dedispersing_time = 0.0
self.FFT_time = 0.0
self.lo_accelsearch_time = 0.0
self.hi_accelsearch_time = 0.0
self.singlepulse_time = 0.0
self.sifting_time = 0.0
self.folding_time = 0.0
self.total_time = 0.0
# Inialize some candidate counters
self.num_sifted_cands = 0
self.num_folded_cands = 0
self.num_single_cands = 0
print "skip = ", skip
print "1st_file_samps = ", first_file_samples
print "numfiles = ", numfiles
break
else:
accum_samples += samples_per_file[ii]
# Now make a command line option for spigot2filterbank
tmpfilenm = "tmp%d.fil" % random.randint(0, 2**30)
cmd = "spigot2filterbank -skip %d -numout %d -o %s " % \
(skip, raw_N, tmpfilenm)
for goodfile in infilenms[ii:ii + numfiles]:
cmd += "%s " % goodfile
os.system(cmd)
# Now read the header to determine what the correct filename
# should be. Use that to rename the fil file.
filhdr, hdrlen = sigproc.read_header(tmpfilenm)
MJDi = int(filhdr['tstart'])
ra_rad = sigproc.ra2radians(filhdr['src_raj'])
ra_string = pu.coord_to_string(*pu.rad_to_hms(ra_rad))
dec_rad = sigproc.dec2radians(filhdr['src_dej'])
dec_string = pu.coord_to_string(*pu.rad_to_dms(dec_rad))
str_coords = "".join(ra_string.split(":")[:2])
if dec_rad >= 0.0: str_coords += "+"
str_coords += "".join(dec_string.split(":")[:2])
filfilenm = "GBT350drift_%d_%s.fil" % (MJDi, str_coords)
os.rename(tmpfilenm, filfilenm)
print "Renamed '%s' to '%s'." % (tmpfilenm, filfilenm)
def write_inf_file(datfn, hdr, hdrlen):
"""Write a PRESTO .inf file given a .dat file and
a dictionary of SIGPROC-style header values.
Inputs:
datfn: The PRESTO .dat file to write a .inf file for.
hdr: A dictionary of SIGPROC header values, as produced
by PRESTO's sigproc.read_header.
hdrlen: Length (in bytes) of SIGPROC file's header.
Output:
inffn: The corresponding .inf file that is created.
"""
if not datfn.endswith(".dat"):
raise ValueError("Was expecting a file name ending with '.dat'. "
"Got: %s" % datfn)
size = os.path.getsize(datfn)
if size % 4:
raise ValueError("Bad size (%d bytes) for PRESTO .dat file (%s)"
"Should be multiple of 4 because samples are "
"32-bit floats." % (size, datfn))
N = size / 4 # Number of samples
rarad = sigproc.ra2radians(hdr['src_raj'])
decrad = sigproc.dec2radians(hdr['src_dej'])
inffn = datfn[:-4]+".inf"
with open(inffn, 'w') as ff:
ff.write(" Data file name without suffix = %s\n" %
os.path.basename(datfn))
ff.write(" Telescope used = %s\n" %
sigproc.ids_to_telescope[hdr['telescope_id']])
ff.write(" Instrument used = %s\n" %
sigproc.ids_to_machine.get('machine_id', 'UNKNOWN'))
ff.write(" Object being observed = %s\n" %
hdr['source_name'])
ff.write(" J2000 Right Ascension (hh:mm:ss.ssss) = %s\n" %
rad_to_hmsstr(rarad))
ff.write(" J2000 Declination (dd:mm:ss.ssss) = %s\n" %
rad_to_dmsstr(decrad))
ff.write(" Data observed by = UNKNOWN\n")
ff.write(" Epoch of observation (MJD) = %05.15f\n" %
hdr['tstart'])
ff.write(" Barycentered? (1=yes, 0=no) = %d\n" %
hdr['barycentric'])
ff.write(" Number of bins in the time series = %d\n" % N)
ff.write(" Width of each time series bin (sec) = %.15g\n" %
hdr['tsamp'])
ff.write(" Orbit removed? (1=yes, 0=no) = %d\n" %
hdr['pulsarcentric'])
ff.write(" Dispersion measure (cm-3 pc) = %f\n" %
hdr['refdm'])
ff.write(" Central freq of low channel (Mhz) = %f\n" %
hdr['fch1'])
ff.write(" Total bandwidth (Mhz) = %f\n" %
(hdr['nchans']*hdr['foff']))
ff.write(" Number of channels = %d\n" %
hdr['nchans'])
ff.write(" Channel bandwidth (Mhz) = %d\n" %
hdr['foff'])
ff.write(" Data analyzed by = %s\n" %
getpass.getuser())
ff.write(" Any additional notes:\n"
" File converted from SIGPROC .tim time series\n"
" with PRESTO's tim2dat.py, written by Patrick Lazarus")
return inffn
break
else:
accum_samples += samples_per_file[ii]
# Now make a command line option for spigot2filterbank
tmpfilenm = "tmp%d.fil"%random.randint(0,2**30)
cmd = "spigot2filterbank -skip %d -numout %d -o %s " % \
(skip, raw_N, tmpfilenm)
for goodfile in infilenms[ii:ii+numfiles]:
cmd += "%s "%goodfile
os.system(cmd)
# Now read the header to determine what the correct filename
# should be. Use that to rename the fil file.
filhdr, hdrlen = sigproc.read_header(tmpfilenm)
MJDi = int(filhdr['tstart'])
ra_rad = sigproc.ra2radians(filhdr['src_raj'])
ra_string = pu.coord_to_string(*pu.rad_to_hms(ra_rad))
dec_rad = sigproc.dec2radians(filhdr['src_dej'])
dec_string = pu.coord_to_string(*pu.rad_to_dms(dec_rad))
str_coords = "".join(ra_string.split(":")[:2])
if dec_rad >= 0.0: str_coords += "+"
str_coords += "".join(dec_string.split(":")[:2])
filfilenm = "GBT350drift_%d_%s.fil" % (MJDi, str_coords)
os.rename(tmpfilenm, filfilenm)
print("Renamed '%s' to '%s'." % (tmpfilenm, filfilenm))
def __init__(self, fil_filenm):
self.fil_filenm = fil_filenm
self.basefilenm = fil_filenm.rstrip(".fil")
self.beam = int(self.basefilenm[-1])
filhdr, self.hdrlen = sigproc.read_header(fil_filenm)
self.orig_filenm = filhdr['rawdatafile']
self.MJD = filhdr['tstart']
self.nchans = filhdr['nchans']
self.ra_rad = sigproc.ra2radians(filhdr['src_raj'])
self.ra_string = psr_utils.coord_to_string(\
*psr_utils.rad_to_hms(self.ra_rad))
self.dec_rad = sigproc.dec2radians(filhdr['src_dej'])
self.dec_string = psr_utils.coord_to_string(\
*psr_utils.rad_to_dms(self.dec_rad))
self.az = filhdr['az_start']
self.el = 90.0 - filhdr['za_start']
self.BW = abs(filhdr['foff']) * filhdr['nchans']
self.dt = filhdr['tsamp']
self.orig_N = sigproc.samples_per_file(fil_filenm, filhdr, self.hdrlen)
self.orig_T = self.orig_N * self.dt
self.N = psr_utils.choose_N(self.orig_N)
self.T = self.N * self.dt
# Update the RA and DEC from the database file if required
newposn = read_db_posn(self.orig_filenm, self.beam)
if newposn is not None:
self.ra_string, self.dec_string = newposn
# ... and use them to update the filterbank file
fix_fil_posn(fil_filenm, self.hdrlen, self.ra_string,
self.dec_string)
# Determine the average barycentric velocity of the observation
self.baryv = presto.get_baryv(self.ra_string,
self.dec_string,
self.MJD,
self.T,
obs="AO")
# Where to dump all the results
# Directory structure is under the base_output_directory
# according to base/MJD/filenmbase/beam
self.outputdir = os.path.join(base_output_directory,
str(int(self.MJD)), self.basefilenm[:-2],
str(self.beam))
# Figure out which host we are processing on
self.hostname = socket.gethostname()
# The fraction of the data recommended to be masked by rfifind
self.masked_fraction = 0.0
# Initialize our timers
self.rfifind_time = 0.0
self.downsample_time = 0.0
self.subbanding_time = 0.0
self.dedispersing_time = 0.0
self.FFT_time = 0.0
self.lo_accelsearch_time = 0.0
self.hi_accelsearch_time = 0.0
self.singlepulse_time = 0.0
self.sifting_time = 0.0
self.folding_time = 0.0
self.total_time = 0.0
# Inialize some candidate counters
self.num_sifted_cands = 0
self.num_folded_cands = 0
self.num_single_cands = 0
def write_inf_file(datfn, hdr, hdrlen):
"""Write a PRESTO .inf file given a .dat file and
a dictionary of SIGPROC-style header values.
Inputs:
datfn: The PRESTO .dat file to write a .inf file for.
hdr: A dictionary of SIGPROC header values, as produced
by PRESTO's sigproc.read_header.
hdrlen: Length (in bytes) of SIGPROC file's header.
Output:
inffn: The corresponding .inf file that is created.
"""
if not datfn.endswith(".dat"):
raise ValueError("Was expecting a file name ending with '.dat'. "
"Got: %s" % datfn)
size = os.path.getsize(datfn)
if size % 4:
raise ValueError("Bad size (%d bytes) for PRESTO .dat file (%s)"
"Should be multiple of 4 because samples are "
"32-bit floats." % (size, datfn))
N = size / 4 # Number of samples
rarad = sigproc.ra2radians(hdr['src_raj'])
decrad = sigproc.dec2radians(hdr['src_dej'])
inffn = datfn[:-4] + ".inf"
with open(inffn, 'w') as ff:
ff.write(" Data file name without suffix = %s\n" %
os.path.basename(datfn))
ff.write(" Telescope used = %s\n" %
sigproc.ids_to_telescope[hdr['telescope_id']])
ff.write(" Instrument used = %s\n" %
sigproc.ids_to_machine.get('machine_id', 'UNKNOWN'))
ff.write(" Object being observed = %s\n" %
hdr['source_name'])
ff.write(" J2000 Right Ascension (hh:mm:ss.ssss) = %s\n" %
rad_to_hmsstr(rarad))
ff.write(" J2000 Declination (dd:mm:ss.ssss) = %s\n" %
rad_to_dmsstr(decrad))
ff.write(" Data observed by = UNKNOWN\n")
ff.write(" Epoch of observation (MJD) = %05.15f\n" %
hdr['tstart'])
ff.write(" Barycentered? (1=yes, 0=no) = %d\n" %
hdr['barycentric'])
ff.write(" Number of bins in the time series = %d\n" % N)
ff.write(" Width of each time series bin (sec) = %.15g\n" %
hdr['tsamp'])
ff.write(" Orbit removed? (1=yes, 0=no) = %d\n" %
hdr['pulsarcentric'])
ff.write(" Dispersion measure (cm-3 pc) = %f\n" %
hdr['refdm'])
ff.write(" Central freq of low channel (Mhz) = %f\n" %
hdr['fch1'])
ff.write(" Total bandwidth (Mhz) = %f\n" %
(hdr['nchans'] * hdr['foff']))
ff.write(" Number of channels = %d\n" %
hdr['nchans'])
ff.write(" Channel bandwidth (Mhz) = %d\n" %
hdr['foff'])
ff.write(" Data analyzed by = %s\n" %
getpass.getuser())
ff.write(" Any additional notes:\n"
" File converted from SIGPROC .tim time series\n"
" with PRESTO's tim2dat.py, written by Patrick Lazarus")
return inffn
