def get_tx_power(self):
"""
Retrieves the TX power of this SFP
Returns:
A list of four integer numbers, representing TX power in mW
for channel 0 to channel 4.
Ex. ['1.86', '1.86', '1.86', '1.86']
"""
tx_power_list = []
tx_power = "N/A"
sfpd_obj = sff8472Dom()
offset = DOM_OFFSET
if not self.get_presence() or not sfpd_obj:
return []
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_voltage_data = sfpd_obj.parse_channel_monitor_params(
dom_channel_monitor_raw, 0)
tx_power = self.__convert_string_to_num(
dom_voltage_data['data']['TXPower']['value'])
tx_power_list.append(tx_power)
tx_power_list.append("N/A")
tx_power_list.append("N/A")
tx_power_list.append("N/A")
return tx_power_list
def get_voltage(self):
"""
Retrieves the supply voltage of this SFP
Returns:
An integer number of supply voltage in mV
"""
voltage = "N/A"
sfpd_obj = sff8472Dom()
offset = DOM_OFFSET
if not self.get_presence() or not sfpd_obj:
return voltage
eeprom_ifraw = self.__read_eeprom_specific_bytes(0, DOM_OFFSET)
sfpi_obj = sff8472InterfaceId(eeprom_ifraw)
cal_type = sfpi_obj.get_calibration_type()
sfpd_obj._calibration_type = cal_type
dom_voltage_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_VOLT_OFFSET), SFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
voltage = self.__convert_string_to_num(
dom_voltage_data['data']['Vcc']['value'])
return voltage
def get_temperature(self):
"""
Retrieves the temperature of this SFP
Returns:
An integer number of current temperature in Celsius
"""
temp = "N/A"
sfpd_obj = sff8472Dom()
offset = DOM_OFFSET
if not self.get_presence() or not sfpd_obj:
return temp
eeprom_ifraw = self.__read_eeprom_specific_bytes(0, DOM_OFFSET)
sfpi_obj = sff8472InterfaceId(eeprom_ifraw)
cal_type = sfpi_obj.get_calibration_type()
sfpd_obj._calibration_type = cal_type
dom_temperature_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_TEMPE_OFFSET), SFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(
dom_temperature_raw, 0)
temp = self.__convert_string_to_num(
dom_temperature_data['data']['Temperature']['value'])
return temp
def __init__(self, index, sfp_type, eeprom_path):
SfpBase.__init__(self)
self.sfp_type = sfp_type
self.index = index
self.eeprom_path = eeprom_path
self.qsfpInfo = sff8436InterfaceId()
self.qsfpDomInfo = sff8436Dom()
self.sfpInfo = sff8472InterfaceId()
self.sfpDomInfo = sff8472Dom(None, 1)
def __init__(self, index, sfp_type, eeprom_path):
SfpBase.__init__(self)
self.index = index
self.eeprom_path = eeprom_path
#sfp_type is the native port type and media_type is the transceiver type
#media_type will be detected in get_transceiver_info
self.sfp_type = sfp_type
self.media_type = self.sfp_type
self.qsfpInfo = sff8436InterfaceId()
self.qsfpDomInfo = sff8436Dom()
self.sfpInfo = sff8472InterfaceId()
self.sfpDomInfo = sff8472Dom(None, 1)
def get_rx_power(self):
"""
Retrieves the received optical power for this SFP
Returns:
A list of four integer numbers, representing received optical
power in mW for channel 0 to channel 4.
Ex. ['1.77', '1.71', '1.68', '1.70']
"""
rx_power_list = []
if self.sfp_type == COPPER_TYPE:
return None
if self.sfp_type == SFP_TYPE:
offset = 256
sfpd_obj = sff8472Dom()
if sfpd_obj is None:
return None
self._dom_capability_detect()
if self.dom_supported:
sfpd_obj._calibration_type = self.calibration
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(
dom_channel_monitor_raw, 0)
rx_power_list.append(
self.__convert_string_to_num(
dom_channel_monitor_data['data']['RXPower']
['value']))
else:
return None
else:
return None
return rx_power_list
def get_transceiver_threshold_info(self):
"""
Retrieves transceiver threshold info of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
temphighalarm |FLOAT |High Alarm Threshold value of temperature in Celsius.
templowalarm |FLOAT |Low Alarm Threshold value of temperature in Celsius.
temphighwarning |FLOAT |High Warning Threshold value of temperature in Celsius.
templowwarning |FLOAT |Low Warning Threshold value of temperature in Celsius.
vcchighalarm |FLOAT |High Alarm Threshold value of supply voltage in mV.
vcclowalarm |FLOAT |Low Alarm Threshold value of supply voltage in mV.
vcchighwarning |FLOAT |High Warning Threshold value of supply voltage in mV.
vcclowwarning |FLOAT |Low Warning Threshold value of supply voltage in mV.
rxpowerhighalarm |FLOAT |High Alarm Threshold value of received power in dBm.
rxpowerlowalarm |FLOAT |Low Alarm Threshold value of received power in dBm.
rxpowerhighwarning |FLOAT |High Warning Threshold value of received power in dBm.
rxpowerlowwarning |FLOAT |Low Warning Threshold value of received power in dBm.
txpowerhighalarm |FLOAT |High Alarm Threshold value of transmit power in dBm.
txpowerlowalarm |FLOAT |Low Alarm Threshold value of transmit power in dBm.
txpowerhighwarning |FLOAT |High Warning Threshold value of transmit power in dBm.
txpowerlowwarning |FLOAT |Low Warning Threshold value of transmit power in dBm.
txbiashighalarm |FLOAT |High Alarm Threshold value of tx Bias Current in mA.
txbiaslowalarm |FLOAT |Low Alarm Threshold value of tx Bias Current in mA.
txbiashighwarning |FLOAT |High Warning Threshold value of tx Bias Current in mA.
txbiaslowwarning |FLOAT |Low Warning Threshold value of tx Bias Current in mA.
========================================================================
"""
# check present status
sfpd_obj = sff8472Dom()
if not self.get_presence() and not sfpd_obj:
return {}
eeprom_ifraw = self.__read_eeprom_specific_bytes(0, DOM_OFFSET)
sfpi_obj = sff8472InterfaceId(eeprom_ifraw)
cal_type = sfpi_obj.get_calibration_type()
sfpd_obj._calibration_type = cal_type
offset = DOM_OFFSET
transceiver_dom_threshold_info_dict = dict.fromkeys(
self.threshold_dict_keys, 'N/A')
dom_module_threshold_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_MODULE_THRESHOLD_OFFSET), SFP_MODULE_THRESHOLD_WIDTH)
if dom_module_threshold_raw is not None:
dom_module_threshold_data = sfpd_obj.parse_alarm_warning_threshold(
dom_module_threshold_raw, 0)
transceiver_dom_threshold_info_dict[
'temphighalarm'] = dom_module_threshold_data['data'][
'TempHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'templowalarm'] = dom_module_threshold_data['data'][
'TempLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'temphighwarning'] = dom_module_threshold_data['data'][
'TempHighWarning']['value']
transceiver_dom_threshold_info_dict[
'templowwarning'] = dom_module_threshold_data['data'][
'TempLowWarning']['value']
transceiver_dom_threshold_info_dict[
'vcchighalarm'] = dom_module_threshold_data['data'][
'VoltageHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'vcclowalarm'] = dom_module_threshold_data['data'][
'VoltageLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'vcchighwarning'] = dom_module_threshold_data['data'][
'VoltageHighWarning']['value']
transceiver_dom_threshold_info_dict[
'vcclowwarning'] = dom_module_threshold_data['data'][
'VoltageLowWarning']['value']
transceiver_dom_threshold_info_dict[
'txbiashighalarm'] = dom_module_threshold_data['data'][
'BiasHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'txbiaslowalarm'] = dom_module_threshold_data['data'][
'BiasLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'txbiashighwarning'] = dom_module_threshold_data['data'][
'BiasHighWarning']['value']
transceiver_dom_threshold_info_dict[
'txbiaslowwarning'] = dom_module_threshold_data['data'][
'BiasLowWarning']['value']
transceiver_dom_threshold_info_dict[
'txpowerhighalarm'] = dom_module_threshold_data['data'][
'TXPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'txpowerlowalarm'] = dom_module_threshold_data['data'][
'TXPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'txpowerhighwarning'] = dom_module_threshold_data['data'][
'TXPowerHighWarning']['value']
transceiver_dom_threshold_info_dict[
'txpowerlowwarning'] = dom_module_threshold_data['data'][
'TXPowerLowWarning']['value']
transceiver_dom_threshold_info_dict[
'rxpowerhighalarm'] = dom_module_threshold_data['data'][
'RXPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'rxpowerlowalarm'] = dom_module_threshold_data['data'][
'RXPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'rxpowerhighwarning'] = dom_module_threshold_data['data'][
'RXPowerHighWarning']['value']
transceiver_dom_threshold_info_dict[
'rxpowerlowwarning'] = dom_module_threshold_data['data'][
'RXPowerLowWarning']['value']
for key in transceiver_dom_threshold_info_dict:
transceiver_dom_threshold_info_dict[
key] = self._convert_string_to_num(
transceiver_dom_threshold_info_dict[key])
return transceiver_dom_threshold_info_dict
def get_transceiver_bulk_status(self):
"""
Retrieves transceiver bulk status of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
rx_los |BOOLEAN |RX loss-of-signal status, True if has RX los, False if not.
tx_fault |BOOLEAN |TX fault status, True if has TX fault, False if not.
reset_status |BOOLEAN |reset status, True if SFP in reset, False if not.
lp_mode |BOOLEAN |low power mode status, True in lp mode, False if not.
tx_disable |BOOLEAN |TX disable status, True TX disabled, False if not.
tx_disabled_channel |HEX |disabled TX channels in hex, bits 0 to 3 represent channel 0
| |to channel 3.
temperature |INT |module temperature in Celsius
voltage |INT |supply voltage in mV
tx<n>bias |INT |TX Bias Current in mA, n is the channel number,
| |for example, tx2bias stands for tx bias of channel 2.
rx<n>power |INT |received optical power in mW, n is the channel number,
| |for example, rx2power stands for rx power of channel 2.
tx<n>power |INT |TX output power in mW, n is the channel number,
| |for example, tx2power stands for tx power of channel 2.
========================================================================
"""
# check present status
sfpd_obj = sff8472Dom()
if not self.get_presence() or not sfpd_obj:
return {}
eeprom_ifraw = self.__read_eeprom_specific_bytes(0, DOM_OFFSET)
sfpi_obj = sff8472InterfaceId(eeprom_ifraw)
cal_type = sfpi_obj.get_calibration_type()
sfpd_obj._calibration_type = cal_type
offset = DOM_OFFSET
transceiver_dom_info_dict = dict.fromkeys(self.dom_dict_keys, 'N/A')
dom_temperature_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_TEMPE_OFFSET), SFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(
dom_temperature_raw, 0)
transceiver_dom_info_dict['temperature'] = dom_temperature_data[
'data']['Temperature']['value']
dom_voltage_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_VOLT_OFFSET), SFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data'][
'Vcc']['value']
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_voltage_data = sfpd_obj.parse_channel_monitor_params(
dom_channel_monitor_raw, 0)
transceiver_dom_info_dict['tx1power'] = dom_voltage_data['data'][
'TXPower']['value']
transceiver_dom_info_dict['rx1power'] = dom_voltage_data['data'][
'RXPower']['value']
transceiver_dom_info_dict['tx1bias'] = dom_voltage_data['data'][
'TXBias']['value']
for key in transceiver_dom_info_dict:
transceiver_dom_info_dict[key] = self._convert_string_to_num(
transceiver_dom_info_dict[key])
transceiver_dom_info_dict['rx_los'] = self.get_rx_los()
transceiver_dom_info_dict['tx_fault'] = self.get_tx_fault()
transceiver_dom_info_dict['reset_status'] = self.get_reset_status()
transceiver_dom_info_dict['lp_mode'] = self.get_lpmode()
return transceiver_dom_info_dict
def get_transceiver_dom_info_dict(self, port_num):
transceiver_dom_info_dict = {}
logger.log_debug("QFX5200: get_transceiver_dom_info_dict Start")
if port_num in self.osfp_ports:
# Below part is added to avoid fail xcvrd, shall be implemented later
transceiver_dom_info_dict['temperature'] = 'N/A'
transceiver_dom_info_dict['voltage'] = 'N/A'
transceiver_dom_info_dict['rx1power'] = 'N/A'
transceiver_dom_info_dict['rx2power'] = 'N/A'
transceiver_dom_info_dict['rx3power'] = 'N/A'
transceiver_dom_info_dict['rx4power'] = 'N/A'
transceiver_dom_info_dict['tx1bias'] = 'N/A'
transceiver_dom_info_dict['tx2bias'] = 'N/A'
transceiver_dom_info_dict['tx3bias'] = 'N/A'
transceiver_dom_info_dict['tx4bias'] = 'N/A'
transceiver_dom_info_dict['tx1power'] = 'N/A'
transceiver_dom_info_dict['tx2power'] = 'N/A'
transceiver_dom_info_dict['tx3power'] = 'N/A'
transceiver_dom_info_dict['tx4power'] = 'N/A'
elif port_num in self.qsfp_ports:
offset = 0
offset_xcvr = 128
file_path = self._get_port_eeprom_path(port_num, self.IDENTITY_EEPROM_ADDR)
if not self._sfp_eeprom_present(file_path, 0):
return None
try:
sysfsfile_eeprom = open(file_path, mode="rb", buffering=0)
except IOError:
print("Error: reading sysfs file %s" % file_path)
return None
sfpd_obj = sff8436Dom()
if sfpd_obj is None:
return None
sfpi_obj = sff8436InterfaceId()
if sfpi_obj is None:
return None
# QSFP capability byte parse, through this byte can know whether it support tx_power or not.
# TODO: in the future when decided to migrate to support SFF-8636 instead of SFF-8436,
# need to add more code for determining the capability and version compliance
# in SFF-8636 dom capability definitions evolving with the versions.
qsfp_dom_capability_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset_xcvr + XCVR_DOM_CAPABILITY_OFFSET), XCVR_DOM_CAPABILITY_WIDTH)
if qsfp_dom_capability_raw is not None:
qspf_dom_capability_data = sfpi_obj.parse_qsfp_dom_capability(qsfp_dom_capability_raw, 0)
else:
return None
dom_temperature_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + QSFP_TEMPE_OFFSET), QSFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
else:
return None
dom_voltage_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + QSFP_VOLT_OFFSET), QSFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
else:
return None
qsfp_dom_rev_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + QSFP_DOM_REV_OFFSET), QSFP_DOM_REV_WIDTH)
if qsfp_dom_rev_raw is not None:
qsfp_dom_rev_data = sfpd_obj.parse_sfp_dom_rev(qsfp_dom_rev_raw, 0)
else:
return None
transceiver_dom_info_dict['temperature'] = dom_temperature_data['data']['Temperature']['value']
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc']['value']
# The tx_power monitoring is only available on QSFP which compliant with SFF-8636
# and claimed that it support tx_power with one indicator bit.
dom_channel_monitor_data = {}
qsfp_dom_rev = qsfp_dom_rev_data['data']['dom_rev']['value']
qsfp_tx_power_support = qspf_dom_capability_data['data']['Tx_power_support']['value']
if (qsfp_dom_rev[0:8] != 'SFF-8636' or (qsfp_dom_rev[0:8] == 'SFF-8636' and qsfp_tx_power_support != 'on')):
dom_channel_monitor_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
else:
return None
transceiver_dom_info_dict['tx1power'] = 'N/A'
transceiver_dom_info_dict['tx2power'] = 'N/A'
transceiver_dom_info_dict['tx3power'] = 'N/A'
transceiver_dom_info_dict['tx4power'] = 'N/A'
else:
dom_channel_monitor_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(
dom_channel_monitor_raw, 0)
else:
return None
transceiver_dom_info_dict['tx1power'] = dom_channel_monitor_data['data']['TX1Power']['value']
transceiver_dom_info_dict['tx2power'] = dom_channel_monitor_data['data']['TX2Power']['value']
transceiver_dom_info_dict['tx3power'] = dom_channel_monitor_data['data']['TX3Power']['value']
transceiver_dom_info_dict['tx4power'] = dom_channel_monitor_data['data']['TX4Power']['value']
try:
sysfsfile_eeprom.close()
except IOError:
print("Error: closing sysfs file %s" % file_path)
return None
transceiver_dom_info_dict['temperature'] = dom_temperature_data['data']['Temperature']['value']
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc']['value']
transceiver_dom_info_dict['rx1power'] = dom_channel_monitor_data['data']['RX1Power']['value']
transceiver_dom_info_dict['rx2power'] = dom_channel_monitor_data['data']['RX2Power']['value']
transceiver_dom_info_dict['rx3power'] = dom_channel_monitor_data['data']['RX3Power']['value']
transceiver_dom_info_dict['rx4power'] = dom_channel_monitor_data['data']['RX4Power']['value']
transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TX1Bias']['value']
transceiver_dom_info_dict['tx2bias'] = dom_channel_monitor_data['data']['TX2Bias']['value']
transceiver_dom_info_dict['tx3bias'] = dom_channel_monitor_data['data']['TX3Bias']['value']
transceiver_dom_info_dict['tx4bias'] = dom_channel_monitor_data['data']['TX4Bias']['value']
else:
offset = 256
file_path = self._get_port_eeprom_path(port_num, self.DOM_EEPROM_ADDR)
if not self._sfp_eeprom_present(file_path, 0):
return None
try:
sysfsfile_eeprom = open(file_path, mode="rb", buffering=0)
except IOError:
print("Error: reading sysfs file %s" % file_path)
return None
sfpd_obj = sff8472Dom()
if sfpd_obj is None:
return None
dom_temperature_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + SFP_TEMPE_OFFSET), SFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(dom_temperature_raw, 0)
else:
return None
dom_voltage_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + SFP_VOLT_OFFSET), SFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
else:
return None
dom_channel_monitor_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom, (offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(dom_channel_monitor_raw, 0)
else:
return None
try:
sysfsfile_eeprom.close()
except IOError:
print("Error: closing sysfs file %s" % file_path)
return None
transceiver_dom_info_dict['temperature'] = dom_temperature_data['data']['Temperature']['value']
transceiver_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc']['value']
transceiver_dom_info_dict['rx1power'] = dom_channel_monitor_data['data']['RXPower']['value']
transceiver_dom_info_dict['rx2power'] = 'N/A'
transceiver_dom_info_dict['rx3power'] = 'N/A'
transceiver_dom_info_dict['rx4power'] = 'N/A'
transceiver_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data']['TXBias']['value']
transceiver_dom_info_dict['tx2bias'] = 'N/A'
transceiver_dom_info_dict['tx3bias'] = 'N/A'
transceiver_dom_info_dict['tx4bias'] = 'N/A'
transceiver_dom_info_dict['tx1power'] = dom_channel_monitor_data['data']['TXPower']['value']
transceiver_dom_info_dict['tx2power'] = 'N/A'
transceiver_dom_info_dict['tx3power'] = 'N/A'
transceiver_dom_info_dict['tx4power'] = 'N/A'
logger.log_debug("QFX5200: get_transceiver_dom_info_dict End")
return transceiver_dom_info_dict
def get_transceiver_dom_threshold_info_dict(self, port_num):
transceiver_dom_threshold_info_dict = {}
dom_info_dict_keys = ['temphighalarm', 'temphighwarning',
'templowalarm', 'templowwarning',
'vcchighalarm', 'vcchighwarning',
'vcclowalarm', 'vcclowwarning',
'rxpowerhighalarm', 'rxpowerhighwarning',
'rxpowerlowalarm', 'rxpowerlowwarning',
'txpowerhighalarm', 'txpowerhighwarning',
'txpowerlowalarm', 'txpowerlowwarning',
'txbiashighalarm', 'txbiashighwarning',
'txbiaslowalarm', 'txbiaslowwarning'
]
transceiver_dom_threshold_info_dict = dict.fromkeys(dom_info_dict_keys, 'N/A')
logger.log_debug("QFX5200: get_transceiver_dom_threshold_info_dict Start")
if port_num in self.qsfp_ports:
file_path = self._get_port_eeprom_path(port_num, self.IDENTITY_EEPROM_ADDR)
if not self._sfp_eeprom_present(file_path, 0):
return None
try:
sysfsfile_eeprom = io.open(file_path, mode="rb", buffering=0)
except IOError:
print("Error: reading sysfs file %s" % file_path)
return None
sfpd_obj = sff8436Dom()
if sfpd_obj is None:
return transceiver_dom_threshold_info_dict
# Dom Threshold data starts from offset 384
# Revert offset back to 0 once data is retrieved
offset = 384
dom_module_threshold_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom,
(offset + QSFP_MODULE_THRESHOLD_OFFSET),
QSFP_MODULE_THRESHOLD_WIDTH)
if dom_module_threshold_raw is not None:
dom_module_threshold_data = sfpd_obj.parse_module_threshold_values(dom_module_threshold_raw, 0)
else:
return transceiver_dom_threshold_info_dict
dom_channel_threshold_raw = self._read_eeprom_specific_bytes(
sysfsfile_eeprom,
(offset + QSFP_CHANNL_THRESHOLD_OFFSET),
QSFP_CHANNL_THRESHOLD_WIDTH)
if dom_channel_threshold_raw is not None:
dom_channel_threshold_data = sfpd_obj.parse_channel_threshold_values(dom_channel_threshold_raw, 0)
else:
return transceiver_dom_threshold_info_dict
try:
sysfsfile_eeprom.close()
except IOError:
print("Error: closing sysfs file %s" % file_path)
return None
# Threshold Data
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VccHighAlarm']['value']
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VccHighWarning']['value']
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VccLowAlarm']['value']
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VccLowWarning']['value']
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_channel_threshold_data['data']['RxPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_channel_threshold_data['data']['RxPowerHighWarning']['value']
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_channel_threshold_data['data']['RxPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_channel_threshold_data['data']['RxPowerLowWarning']['value']
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_channel_threshold_data['data']['TxBiasHighAlarm']['value']
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_channel_threshold_data['data']['TxBiasHighWarning']['value']
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_channel_threshold_data['data']['TxBiasLowAlarm']['value']
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_channel_threshold_data['data']['TxBiasLowWarning']['value']
else:
offset = 256
file_path = self._get_port_eeprom_path(port_num, self.DOM_EEPROM_ADDR)
if not self._sfp_eeprom_present(file_path, 0):
return None
try:
sysfsfile_eeprom = io.open(file_path, "rb", 0)
except IOError:
print("Error: reading sysfs file %s" % file_path)
return None
sfpd_obj = sff8472Dom(None, 1)
if sfpd_obj is None:
return transceiver_dom_threshold_info_dict
dom_module_threshold_raw = self._read_eeprom_specific_bytes(sysfsfile_eeprom,
(offset + SFP_MODULE_THRESHOLD_OFFSET), SFP_MODULE_THRESHOLD_WIDTH)
if dom_module_threshold_raw is not None:
dom_module_threshold_data = sfpd_obj.parse_alarm_warning_threshold(dom_module_threshold_raw, 0)
else:
return transceiver_dom_threshold_info_dict
try:
sysfsfile_eeprom.close()
except IOError:
print("Error: closing sysfs file %s" % file_path)
return None
# Threshold Data
transceiver_dom_threshold_info_dict['temphighalarm'] = dom_module_threshold_data['data']['TempHighAlarm']['value']
transceiver_dom_threshold_info_dict['templowalarm'] = dom_module_threshold_data['data']['TempLowAlarm']['value']
transceiver_dom_threshold_info_dict['temphighwarning'] = dom_module_threshold_data['data']['TempHighWarning']['value']
transceiver_dom_threshold_info_dict['templowwarning'] = dom_module_threshold_data['data']['TempLowWarning']['value']
transceiver_dom_threshold_info_dict['vcchighalarm'] = dom_module_threshold_data['data']['VoltageHighAlarm']['value']
transceiver_dom_threshold_info_dict['vcclowalarm'] = dom_module_threshold_data['data']['VoltageLowAlarm']['value']
transceiver_dom_threshold_info_dict['vcchighwarning'] = dom_module_threshold_data['data']['VoltageHighWarning']['value']
transceiver_dom_threshold_info_dict['vcclowwarning'] = dom_module_threshold_data['data']['VoltageLowWarning']['value']
transceiver_dom_threshold_info_dict['txbiashighalarm'] = dom_module_threshold_data['data']['BiasHighAlarm']['value']
transceiver_dom_threshold_info_dict['txbiaslowalarm'] = dom_module_threshold_data['data']['BiasLowAlarm']['value']
transceiver_dom_threshold_info_dict['txbiashighwarning'] = dom_module_threshold_data['data']['BiasHighWarning']['value']
transceiver_dom_threshold_info_dict['txbiaslowwarning'] = dom_module_threshold_data['data']['BiasLowWarning']['value']
transceiver_dom_threshold_info_dict['txpowerhighalarm'] = dom_module_threshold_data['data']['TXPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict['txpowerlowalarm'] = dom_module_threshold_data['data']['TXPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict['txpowerhighwarning'] = dom_module_threshold_data['data']['TXPowerHighWarning']['value']
transceiver_dom_threshold_info_dict['txpowerlowwarning'] = dom_module_threshold_data['data']['TXPowerLowWarning']['value']
transceiver_dom_threshold_info_dict['rxpowerhighalarm'] = dom_module_threshold_data['data']['RXPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict['rxpowerlowalarm'] = dom_module_threshold_data['data']['RXPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict['rxpowerhighwarning'] = dom_module_threshold_data['data']['RXPowerHighWarning']['value']
transceiver_dom_threshold_info_dict['rxpowerlowwarning'] = dom_module_threshold_data['data']['RXPowerLowWarning']['value']
logger.log_debug("QFX5200: get_transceiver_dom_threshold_info_dict End")
return transceiver_dom_threshold_info_dict
def get_transceiver_threshold_info(self):
"""
Retrieves transceiver threshold info of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
temphighalarm |FLOAT |High Alarm Threshold value of temperature in Celsius.
templowalarm |FLOAT |Low Alarm Threshold value of temperature in Celsius.
temphighwarning |FLOAT |High Warning Threshold value of temperature in Celsius.
templowwarning |FLOAT |Low Warning Threshold value of temperature in Celsius.
vcchighalarm |FLOAT |High Alarm Threshold value of supply voltage in mV.
vcclowalarm |FLOAT |Low Alarm Threshold value of supply voltage in mV.
vcchighwarning |FLOAT |High Warning Threshold value of supply voltage in mV.
vcclowwarning |FLOAT |Low Warning Threshold value of supply voltage in mV.
rxpowerhighalarm |FLOAT |High Alarm Threshold value of received power in dBm.
rxpowerlowalarm |FLOAT |Low Alarm Threshold value of received power in dBm.
rxpowerhighwarning |FLOAT |High Warning Threshold value of received power in dBm.
rxpowerlowwarning |FLOAT |Low Warning Threshold value of received power in dBm.
txpowerhighalarm |FLOAT |High Alarm Threshold value of transmit power in dBm.
txpowerlowalarm |FLOAT |Low Alarm Threshold value of transmit power in dBm.
txpowerhighwarning |FLOAT |High Warning Threshold value of transmit power in dBm.
txpowerlowwarning |FLOAT |Low Warning Threshold value of transmit power in dBm.
txbiashighalarm |FLOAT |High Alarm Threshold value of tx Bias Current in mA.
txbiaslowalarm |FLOAT |Low Alarm Threshold value of tx Bias Current in mA.
txbiashighwarning |FLOAT |High Warning Threshold value of tx Bias Current in mA.
txbiaslowwarning |FLOAT |Low Warning Threshold value of tx Bias Current in mA.
========================================================================
"""
transceiver_dom_threshold_info_dict = dict.fromkeys(
self.threshold_dict_keys, 'N/A')
if self.sfp_type == COPPER_TYPE:
return transceiver_dom_threshold_info_dict
if self.sfp_type == SFP_TYPE:
offset = SFP_MODULE_ADDRA2_OFFSET
self._dom_capability_detect()
if not self.dom_supported:
return transceiver_dom_threshold_info_dict
sfpd_obj = sff8472Dom(None, self.calibration)
if sfpd_obj is None:
return transceiver_dom_threshold_info_dict
dom_module_threshold_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_MODULE_THRESHOLD_OFFSET),
SFP_MODULE_THRESHOLD_WIDTH)
if dom_module_threshold_raw is not None:
dom_module_threshold_data = sfpd_obj.parse_alarm_warning_threshold(
dom_module_threshold_raw, 0)
else:
return transceiver_dom_threshold_info_dict
# Threshold Data
transceiver_dom_threshold_info_dict[
'temphighalarm'] = dom_module_threshold_data['data'][
'TempHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'templowalarm'] = dom_module_threshold_data['data'][
'TempLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'temphighwarning'] = dom_module_threshold_data['data'][
'TempHighWarning']['value']
transceiver_dom_threshold_info_dict[
'templowwarning'] = dom_module_threshold_data['data'][
'TempLowWarning']['value']
transceiver_dom_threshold_info_dict[
'vcchighalarm'] = dom_module_threshold_data['data'][
'VoltageHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'vcclowalarm'] = dom_module_threshold_data['data'][
'VoltageLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'vcchighwarning'] = dom_module_threshold_data['data'][
'VoltageHighWarning']['value']
transceiver_dom_threshold_info_dict[
'vcclowwarning'] = dom_module_threshold_data['data'][
'VoltageLowWarning']['value']
transceiver_dom_threshold_info_dict[
'txbiashighalarm'] = dom_module_threshold_data['data'][
'BiasHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'txbiaslowalarm'] = dom_module_threshold_data['data'][
'BiasLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'txbiashighwarning'] = dom_module_threshold_data['data'][
'BiasHighWarning']['value']
transceiver_dom_threshold_info_dict[
'txbiaslowwarning'] = dom_module_threshold_data['data'][
'BiasLowWarning']['value']
transceiver_dom_threshold_info_dict[
'txpowerhighalarm'] = dom_module_threshold_data['data'][
'TXPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'txpowerlowalarm'] = dom_module_threshold_data['data'][
'TXPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'txpowerhighwarning'] = dom_module_threshold_data['data'][
'TXPowerHighWarning']['value']
transceiver_dom_threshold_info_dict[
'txpowerlowwarning'] = dom_module_threshold_data['data'][
'TXPowerLowWarning']['value']
transceiver_dom_threshold_info_dict[
'rxpowerhighalarm'] = dom_module_threshold_data['data'][
'RXPowerHighAlarm']['value']
transceiver_dom_threshold_info_dict[
'rxpowerlowalarm'] = dom_module_threshold_data['data'][
'RXPowerLowAlarm']['value']
transceiver_dom_threshold_info_dict[
'rxpowerhighwarning'] = dom_module_threshold_data['data'][
'RXPowerHighWarning']['value']
transceiver_dom_threshold_info_dict[
'rxpowerlowwarning'] = dom_module_threshold_data['data'][
'RXPowerLowWarning']['value']
return transceiver_dom_threshold_info_dict
def get_transceiver_bulk_status(self):
"""
Retrieves transceiver bulk status of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
rx_los |BOOLEAN |RX loss-of-signal status, True if has RX los, False if not.
tx_fault |BOOLEAN |TX fault status, True if has TX fault, False if not.
reset_status |BOOLEAN |reset status, True if SFP in reset, False if not.
lp_mode |BOOLEAN |low power mode status, True in lp mode, False if not.
tx_disable |BOOLEAN |TX disable status, True TX disabled, False if not.
tx_disabled_channel |HEX |disabled TX channels in hex, bits 0 to 3 represent channel 0
| |to channel 3.
temperature |INT |module temperature in Celsius
voltage |INT |supply voltage in mV
tx<n>bias |INT |TX Bias Current in mA, n is the channel number,
| |for example, tx2bias stands for tx bias of channel 2.
rx<n>power |INT |received optical power in mW, n is the channel number,
| |for example, rx2power stands for rx power of channel 2.
tx<n>power |INT |TX output power in mW, n is the channel number,
| |for example, tx2power stands for tx power of channel 2.
========================================================================
"""
transceiver_dom_info_dict = dict.fromkeys(self.dom_dict_keys, 'N/A')
if self.sfp_type == COPPER_TYPE:
return transceiver_dom_info_dict
if self.sfp_type == SFP_TYPE:
self._dom_capability_detect()
if not self.dom_supported:
return transceiver_dom_info_dict
offset = 256
sfpd_obj = sff8472Dom()
if sfpd_obj is None:
return transceiver_dom_info_dict
sfpd_obj._calibration_type = self.calibration
dom_data_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_DOM_BULK_DATA_START), SFP_DOM_BULK_DATA_SIZE)
start = SFP_TEMPE_OFFSET - SFP_DOM_BULK_DATA_START
end = start + SFP_TEMPE_WIDTH
dom_temperature_data = sfpd_obj.parse_temperature(
dom_data_raw[start:end], 0)
start = SFP_VOLT_OFFSET - SFP_DOM_BULK_DATA_START
end = start + SFP_VOLT_WIDTH
dom_voltage_data = sfpd_obj.parse_voltage(dom_data_raw[start:end],
0)
start = SFP_CHANNL_MON_OFFSET - SFP_DOM_BULK_DATA_START
end = start + SFP_CHANNL_MON_WIDTH
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(
dom_data_raw[start:end], 0)
transceiver_dom_info_dict[
'temperature'] = self.__convert_string_to_num(
dom_temperature_data['data']['Temperature']['value'])
transceiver_dom_info_dict[
'voltage'] = self.__convert_string_to_num(
dom_voltage_data['data']['Vcc']['value'])
transceiver_dom_info_dict[
'rx1power'] = self.__convert_string_to_num(
dom_channel_monitor_data['data']['RXPower']['value'])
transceiver_dom_info_dict[
'tx1bias'] = self.__convert_string_to_num(
dom_channel_monitor_data['data']['TXBias']['value'])
transceiver_dom_info_dict[
'tx1power'] = self.__convert_string_to_num(
dom_channel_monitor_data['data']['TXPower']['value'])
transceiver_dom_info_dict['rx_los'] = self.get_rx_los()
transceiver_dom_info_dict['tx_fault'] = self.get_tx_fault()
transceiver_dom_info_dict['reset_status'] = self.get_reset_status()
transceiver_dom_info_dict['lp_mode'] = self.get_lpmode()
return transceiver_dom_info_dict
def get_transceiver_threshold_info(self):
"""
Retrieves transceiver threshold info of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
temphighalarm |FLOAT |High Alarm Threshold value of temperature in Celsius.
templowalarm |FLOAT |Low Alarm Threshold value of temperature in Celsius.
temphighwarning |FLOAT |High Warning Threshold value of temperature in Celsius.
templowwarning |FLOAT |Low Warning Threshold value of temperature in Celsius.
vcchighalarm |FLOAT |High Alarm Threshold value of supply voltage in mV.
vcclowalarm |FLOAT |Low Alarm Threshold value of supply voltage in mV.
vcchighwarning |FLOAT |High Warning Threshold value of supply voltage in mV.
vcclowwarning |FLOAT |Low Warning Threshold value of supply voltage in mV.
rxpowerhighalarm |FLOAT |High Alarm Threshold value of received power in dBm.
rxpowerlowalarm |FLOAT |Low Alarm Threshold value of received power in dBm.
rxpowerhighwarning |FLOAT |High Warning Threshold value of received power in dBm.
rxpowerlowwarning |FLOAT |Low Warning Threshold value of received power in dBm.
txpowerhighalarm |FLOAT |High Alarm Threshold value of transmit power in dBm.
txpowerlowalarm |FLOAT |Low Alarm Threshold value of transmit power in dBm.
txpowerhighwarning |FLOAT |High Warning Threshold value of transmit power in dBm.
txpowerlowwarning |FLOAT |Low Warning Threshold value of transmit power in dBm.
txbiashighalarm |FLOAT |High Alarm Threshold value of tx Bias Current in mA.
txbiaslowalarm |FLOAT |Low Alarm Threshold value of tx Bias Current in mA.
txbiashighwarning |FLOAT |High Warning Threshold value of tx Bias Current in mA.
txbiaslowwarning |FLOAT |Low Warning Threshold value of tx Bias Current in mA.
========================================================================
"""
# check present status
if not self.get_presence():
return None
xcvr_dom_threshold_info_dict = dict.fromkeys(self.threshold_dict_keys,
'N/A')
if self.is_osfp_port:
# Below part is added to avoid fail xcvrd, shall be implemented later
pass
elif self.is_qsfp_port:
# QSFPs
sfpd_obj = sff8436Dom()
if sfpd_obj is None:
return None
dom_thres_raw = self.__read_eeprom_specific_bytes(
QSFP_MODULE_THRESHOLD_OFFSET, QSFP_MODULE_THRESHOLD_WIDTH)
if dom_thres_raw:
module_threshold_values = sfpd_obj.parse_module_threshold_values(
dom_thres_raw, 0)
module_threshold_data = module_threshold_values.get('data')
if module_threshold_data:
xcvr_dom_threshold_info_dict[
'temphighalarm'] = module_threshold_data[
'TempHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'templowalarm'] = module_threshold_data[
'TempLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'temphighwarning'] = module_threshold_data[
'TempHighWarning']['value']
xcvr_dom_threshold_info_dict[
'templowwarning'] = module_threshold_data[
'TempLowWarning']['value']
xcvr_dom_threshold_info_dict[
'vcchighalarm'] = module_threshold_data[
'VccHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'vcclowalarm'] = module_threshold_data['VccLowAlarm'][
'value']
xcvr_dom_threshold_info_dict[
'vcchighwarning'] = module_threshold_data[
'VccHighWarning']['value']
xcvr_dom_threshold_info_dict[
'vcclowwarning'] = module_threshold_data[
'VccLowWarning']['value']
dom_thres_raw = self.__read_eeprom_specific_bytes(
QSFP_CHANNEL_THRESHOLD_OFFSET, QSFP_CHANNEL_THRESHOLD_WIDTH)
if dom_thres_raw:
channel_threshold_values = sfpd_obj.parse_channel_threshold_values(
dom_thres_raw, 0)
channel_threshold_data = channel_threshold_values.get('data')
if channel_threshold_data:
xcvr_dom_threshold_info_dict[
'rxpowerhighalarm'] = channel_threshold_data[
'RxPowerHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'rxpowerlowalarm'] = channel_threshold_data[
'RxPowerLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'rxpowerhighwarning'] = channel_threshold_data[
'RxPowerHighWarning']['value']
xcvr_dom_threshold_info_dict[
'rxpowerlowwarning'] = channel_threshold_data[
'RxPowerLowWarning']['value']
xcvr_dom_threshold_info_dict['txpowerhighalarm'] = "0.0dBm"
xcvr_dom_threshold_info_dict['txpowerlowalarm'] = "0.0dBm"
xcvr_dom_threshold_info_dict[
'txpowerhighwarning'] = "0.0dBm"
xcvr_dom_threshold_info_dict[
'txpowerlowwarning'] = "0.0dBm"
xcvr_dom_threshold_info_dict[
'txbiashighalarm'] = channel_threshold_data[
'TxBiasHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'txbiaslowalarm'] = channel_threshold_data[
'TxBiasLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'txbiashighwarning'] = channel_threshold_data[
'TxBiasHighWarning']['value']
xcvr_dom_threshold_info_dict[
'txbiaslowwarning'] = channel_threshold_data[
'TxBiasLowWarning']['value']
else:
# SFPs
sfpd_obj = sff8472Dom()
offset = 256
eeprom_ifraw = self.__read_eeprom_specific_bytes(0, offset)
sfpi_obj = sff8472InterfaceId(eeprom_ifraw)
cal_type = sfpi_obj.get_calibration_type()
sfpd_obj._calibration_type = cal_type
dom_module_threshold_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_MODULE_THRESHOLD_OFFSET),
SFP_MODULE_THRESHOLD_WIDTH)
if dom_module_threshold_raw is not None:
dom_module_threshold_data = sfpd_obj.parse_alarm_warning_threshold(
dom_module_threshold_raw, 0)
xcvr_dom_threshold_info_dict[
'temphighalarm'] = dom_module_threshold_data['data'][
'TempHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'templowalarm'] = dom_module_threshold_data['data'][
'TempLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'temphighwarning'] = dom_module_threshold_data['data'][
'TempHighWarning']['value']
xcvr_dom_threshold_info_dict[
'templowwarning'] = dom_module_threshold_data['data'][
'TempLowWarning']['value']
xcvr_dom_threshold_info_dict[
'vcchighalarm'] = dom_module_threshold_data['data'][
'VoltageHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'vcclowalarm'] = dom_module_threshold_data['data'][
'VoltageLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'vcchighwarning'] = dom_module_threshold_data['data'][
'VoltageHighWarning']['value']
xcvr_dom_threshold_info_dict[
'vcclowwarning'] = dom_module_threshold_data['data'][
'VoltageLowWarning']['value']
xcvr_dom_threshold_info_dict[
'txbiashighalarm'] = dom_module_threshold_data['data'][
'BiasHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'txbiaslowalarm'] = dom_module_threshold_data['data'][
'BiasLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'txbiashighwarning'] = dom_module_threshold_data['data'][
'BiasHighWarning']['value']
xcvr_dom_threshold_info_dict[
'txbiaslowwarning'] = dom_module_threshold_data['data'][
'BiasLowWarning']['value']
xcvr_dom_threshold_info_dict[
'txpowerhighalarm'] = dom_module_threshold_data['data'][
'TXPowerHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'txpowerlowalarm'] = dom_module_threshold_data['data'][
'TXPowerLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'txpowerhighwarning'] = dom_module_threshold_data['data'][
'TXPowerHighWarning']['value']
xcvr_dom_threshold_info_dict[
'txpowerlowwarning'] = dom_module_threshold_data['data'][
'TXPowerLowWarning']['value']
xcvr_dom_threshold_info_dict[
'rxpowerhighalarm'] = dom_module_threshold_data['data'][
'RXPowerHighAlarm']['value']
xcvr_dom_threshold_info_dict[
'rxpowerlowalarm'] = dom_module_threshold_data['data'][
'RXPowerLowAlarm']['value']
xcvr_dom_threshold_info_dict[
'rxpowerhighwarning'] = dom_module_threshold_data['data'][
'RXPowerHighWarning']['value']
xcvr_dom_threshold_info_dict[
'rxpowerlowwarning'] = dom_module_threshold_data['data'][
'RXPowerLowWarning']['value']
return xcvr_dom_threshold_info_dict
def get_transceiver_bulk_status(self):
"""
Retrieves transceiver bulk status of this SFP
Returns:
A dict which contains following keys/values :
========================================================================
keys |Value Format |Information
---------------------------|---------------|----------------------------
RX LOS |BOOLEAN |RX lost-of-signal status,
| |True if has RX los, False if not.
TX FAULT |BOOLEAN |TX fault status,
| |True if has TX fault, False if not.
Reset status |BOOLEAN |reset status,
| |True if SFP in reset, False if not.
LP mode |BOOLEAN |low power mode status,
| |True in lp mode, False if not.
TX disable |BOOLEAN |TX disable status,
| |True TX disabled, False if not.
TX disabled channel |HEX |disabled TX channles in hex,
| |bits 0 to 3 represent channel 0
| |to channel 3.
Temperature |INT |module temperature in Celsius
Voltage |INT |supply voltage in mV
TX bias |INT |TX Bias Current in mA
RX power |INT |received optical power in mW
TX power |INT |TX output power in mW
========================================================================
"""
# check present status
if not self.get_presence():
return None
xcvr_dom_info_dict = dict.fromkeys(self.dom_dict_keys, 'N/A')
if self.is_osfp_port:
# Below part is added to avoid fail xcvrd, shall be implemented later
pass
elif self.is_qsfp_port:
# QSFPs
offset = 0
offset_xcvr = 128
sfpd_obj = sff8436Dom()
if sfpd_obj is None:
return None
sfpi_obj = sff8436InterfaceId()
if sfpi_obj is None:
return None
qsfp_dom_capability_raw = self.__read_eeprom_specific_bytes(
(offset_xcvr + XCVR_DOM_CAPABILITY_OFFSET),
XCVR_DOM_CAPABILITY_WIDTH)
if qsfp_dom_capability_raw is not None:
qspf_dom_capability_data = sfpi_obj.parse_qsfp_dom_capability(
qsfp_dom_capability_raw, 0)
else:
return None
dom_temperature_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_TEMPE_OFFSET), QSFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(
dom_temperature_raw, 0)
else:
return None
dom_voltage_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_VOLT_OFFSET), QSFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
else:
return None
qsfp_dom_rev_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_DOM_REV_OFFSET), QSFP_DOM_REV_WIDTH)
if qsfp_dom_rev_raw is not None:
qsfp_dom_rev_data = sfpd_obj.parse_sfp_dom_rev(
qsfp_dom_rev_raw, 0)
else:
return None
xcvr_dom_info_dict['temperature'] = dom_temperature_data['data'][
'Temperature']['value']
xcvr_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc'][
'value']
# The tx_power monitoring is only available on QSFP which compliant with SFF-8636
# and claimed that it support tx_power with one indicator bit.
dom_channel_monitor_data = {}
qsfp_dom_rev = qsfp_dom_rev_data['data']['dom_rev']['value']
qsfp_tx_power_support = qspf_dom_capability_data['data'][
'Tx_power_support']['value']
if (qsfp_dom_rev[0:8] != 'SFF-8636'
or (qsfp_dom_rev[0:8] == 'SFF-8636'
and qsfp_tx_power_support != 'on')):
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_CHANNL_MON_OFFSET), QSFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(
dom_channel_monitor_raw, 0)
else:
return None
xcvr_dom_info_dict['tx1power'] = 'N/A'
xcvr_dom_info_dict['tx2power'] = 'N/A'
xcvr_dom_info_dict['tx3power'] = 'N/A'
xcvr_dom_info_dict['tx4power'] = 'N/A'
else:
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_CHANNL_MON_OFFSET),
QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(
dom_channel_monitor_raw, 0)
else:
return None
xcvr_dom_info_dict['tx1power'] = dom_channel_monitor_data[
'data']['TX1Power']['value']
xcvr_dom_info_dict['tx2power'] = dom_channel_monitor_data[
'data']['TX2Power']['value']
xcvr_dom_info_dict['tx3power'] = dom_channel_monitor_data[
'data']['TX3Power']['value']
xcvr_dom_info_dict['tx4power'] = dom_channel_monitor_data[
'data']['TX4Power']['value']
if dom_channel_monitor_raw:
xcvr_dom_info_dict['temperature'] = dom_temperature_data[
'data']['Temperature']['value']
xcvr_dom_info_dict['voltage'] = dom_voltage_data['data'][
'Vcc']['value']
xcvr_dom_info_dict['rx1power'] = dom_channel_monitor_data[
'data']['RX1Power']['value']
xcvr_dom_info_dict['rx2power'] = dom_channel_monitor_data[
'data']['RX2Power']['value']
xcvr_dom_info_dict['rx3power'] = dom_channel_monitor_data[
'data']['RX3Power']['value']
xcvr_dom_info_dict['rx4power'] = dom_channel_monitor_data[
'data']['RX4Power']['value']
xcvr_dom_info_dict['tx1bias'] = dom_channel_monitor_data[
'data']['TX1Bias']['value']
xcvr_dom_info_dict['tx2bias'] = dom_channel_monitor_data[
'data']['TX2Bias']['value']
xcvr_dom_info_dict['tx3bias'] = dom_channel_monitor_data[
'data']['TX3Bias']['value']
xcvr_dom_info_dict['tx4bias'] = dom_channel_monitor_data[
'data']['TX4Bias']['value']
else:
# SFPs
offset = 256
sfpd_obj = sff8472Dom()
if sfpd_obj is None:
return None
dom_temperature_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_TEMPE_OFFSET), SFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(
dom_temperature_raw, 0)
else:
return None
dom_voltage_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_VOLT_OFFSET), SFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
else:
return None
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(
dom_channel_monitor_raw, 0)
else:
return None
xcvr_dom_info_dict['temperature'] = dom_temperature_data['data'][
'Temperature']['value']
xcvr_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc'][
'value']
xcvr_dom_info_dict['rx1power'] = dom_channel_monitor_data['data'][
'RXPower']['value']
xcvr_dom_info_dict['rx2power'] = 'N/A'
xcvr_dom_info_dict['rx3power'] = 'N/A'
xcvr_dom_info_dict['rx4power'] = 'N/A'
xcvr_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data'][
'TXBias']['value']
xcvr_dom_info_dict['tx2bias'] = 'N/A'
xcvr_dom_info_dict['tx3bias'] = 'N/A'
xcvr_dom_info_dict['tx4bias'] = 'N/A'
xcvr_dom_info_dict['tx1power'] = dom_channel_monitor_data['data'][
'TXPower']['value']
xcvr_dom_info_dict['tx2power'] = 'N/A'
xcvr_dom_info_dict['tx3power'] = 'N/A'
xcvr_dom_info_dict['tx4power'] = 'N/A'
xcvr_dom_info_dict['rx_los'] = self.get_rx_los()
xcvr_dom_info_dict['tx_fault'] = self.get_tx_fault()
xcvr_dom_info_dict['reset_status'] = self.get_reset_status()
xcvr_dom_info_dict['lp_mode'] = self.get_lpmode()
return xcvr_dom_info_dict
def get_transceiver_bulk_status(self):
# check present status
if not self.get_presence():
return None
self.__dom_capability_detect()
xcvr_dom_info_dict = dict.fromkeys(self.dom_dict_keys, 'N/A')
if self.is_osfp_port:
# Below part is added to avoid fail xcvrd, shall be implemented later
pass
elif self.is_qsfp_port:
# QSFPs
xcvr_dom_info_dict = super(Sfp, self).get_transceiver_bulk_status()
# pddf_sfp "qsfp_tx_power_support != 'on'" is wrong
offset = 0
sfpd_obj = sff8436Dom()
if sfpd_obj is None:
return None
qsfp_dom_rev_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_DOM_REV_OFFSET), QSFP_DOM_REV_WIDTH)
if qsfp_dom_rev_raw is not None:
qsfp_dom_rev_data = sfpd_obj.parse_sfp_dom_rev(
qsfp_dom_rev_raw, 0)
else:
return None
dom_channel_monitor_data = {}
qsfp_dom_rev = qsfp_dom_rev_data['data']['dom_rev']['value']
if (qsfp_dom_rev[0:8] == 'SFF-8636'
and self.dom_tx_power_supported is True):
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + QSFP_CHANNL_MON_OFFSET),
QSFP_CHANNL_MON_WITH_TX_POWER_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params_with_tx_power(
dom_channel_monitor_raw, 0)
else:
return None
xcvr_dom_info_dict['tx1power'] = dom_channel_monitor_data[
'data']['TX1Power']['value']
xcvr_dom_info_dict['tx2power'] = dom_channel_monitor_data[
'data']['TX2Power']['value']
xcvr_dom_info_dict['tx3power'] = dom_channel_monitor_data[
'data']['TX3Power']['value']
xcvr_dom_info_dict['tx4power'] = dom_channel_monitor_data[
'data']['TX4Power']['value']
else:
# SFPs
offset = 256
if not self.dom_supported:
return xcvr_dom_info_dict
sfpd_obj = sff8472Dom()
if sfpd_obj is None:
return None
sfpd_obj._calibration_type = self.calibration
dom_temperature_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_TEMPE_OFFSET), SFP_TEMPE_WIDTH)
if dom_temperature_raw is not None:
dom_temperature_data = sfpd_obj.parse_temperature(
dom_temperature_raw, 0)
else:
return None
dom_voltage_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_VOLT_OFFSET), SFP_VOLT_WIDTH)
if dom_voltage_raw is not None:
dom_voltage_data = sfpd_obj.parse_voltage(dom_voltage_raw, 0)
else:
return None
dom_channel_monitor_raw = self.__read_eeprom_specific_bytes(
(offset + SFP_CHANNL_MON_OFFSET), SFP_CHANNL_MON_WIDTH)
if dom_channel_monitor_raw is not None:
dom_channel_monitor_data = sfpd_obj.parse_channel_monitor_params(
dom_channel_monitor_raw, 0)
else:
return None
xcvr_dom_info_dict['temperature'] = dom_temperature_data['data'][
'Temperature']['value']
xcvr_dom_info_dict['voltage'] = dom_voltage_data['data']['Vcc'][
'value']
xcvr_dom_info_dict['rx1power'] = dom_channel_monitor_data['data'][
'RXPower']['value']
xcvr_dom_info_dict['rx2power'] = 'N/A'
xcvr_dom_info_dict['rx3power'] = 'N/A'
xcvr_dom_info_dict['rx4power'] = 'N/A'
xcvr_dom_info_dict['tx1bias'] = dom_channel_monitor_data['data'][
'TXBias']['value']
xcvr_dom_info_dict['tx2bias'] = 'N/A'
xcvr_dom_info_dict['tx3bias'] = 'N/A'
xcvr_dom_info_dict['tx4bias'] = 'N/A'
xcvr_dom_info_dict['tx1power'] = dom_channel_monitor_data['data'][
'TXPower']['value']
xcvr_dom_info_dict['tx2power'] = 'N/A'
xcvr_dom_info_dict['tx3power'] = 'N/A'
xcvr_dom_info_dict['tx4power'] = 'N/A'
xcvr_dom_info_dict['rx_los'] = self.get_rx_los()
xcvr_dom_info_dict['tx_fault'] = self.get_tx_fault()
xcvr_dom_info_dict['reset_status'] = self.get_reset_status()
xcvr_dom_info_dict['lp_mode'] = self.get_lpmode()
return xcvr_dom_info_dict