def test_vtysh_prompt_modes_check_1():
vars = st.get_testbed_vars()
st.change_prompt(vars.D1, "normal-user")
# from vtysh mode to normal user and back to normal user
st.change_prompt(vars.D1, "vtysh-user")
st.change_prompt(vars.D1, "normal-user")
# from sonic to vtysh config mode and back to normal user
st.change_prompt(vars.D1, "vtysh-config")
st.change_prompt(vars.D1, "normal-user")
st.change_prompt(vars.D1, "vtysh-intf-config", interface="Ethernet40")
st.change_prompt(vars.D1, "vtysh-intf-config", interface="Ethernet4")
st.change_prompt(vars.D1, "vtysh-intf-config", interface="Ethernet40")
st.change_prompt(vars.D1, "vtysh-user")
# from sonic to vtysh router config mode and back to normal user
st.change_prompt(vars.D1, "vtysh-router-config", router="bgp", instance="1")
st.change_prompt(vars.D1, "vtysh-router-af-config", addr_family="ipv4", modifier="unicast")
st.change_prompt(vars.D1, "vtysh-router-config", router="rip")
st.change_prompt(vars.D1, "vtysh-user")
st.change_prompt(vars.D1, "vtysh-router-config", router="bgp", instance="1")
st.change_prompt(vars.D1, "vtysh-router-af-config", addr_family="ipv4", modifier="unicast")
st.change_prompt(vars.D1, "vtysh-router-config", router="rip")
# using vtysh_show and back to normal user
st.vtysh_show(vars.D1, "show ip prefix-list", skip_tmpl=True)
st.change_prompt(vars.D1, "normal-user")
st.show(vars.D1, "show interfaces status")
st.report_pass("operation_successful")
def test_vtysh_modes_check_2():
vars = st.get_testbed_vars()
# Command in Config level - with mode change - with end and exit
st.vtysh_config(vars.D1, "route-map test permit 1")
st.vtysh_show(vars.D1, "show route-map test")
st.vtysh_config(vars.D1, "exit")
st.vtysh_config(vars.D1, "route-map test permit 1")
st.vtysh_show(vars.D1, "show route-map test")
st.vtysh_config(vars.D1, "end")
st.report_pass("operation_successful")
def test_vtysh_modes_check_3():
vars = st.get_testbed_vars()
# Multiple commands in Config level - with one mode change - with end and exit
st.vtysh_config(vars.D1, "ip prefix-list test permit 5.5.5.0/24")
st.vtysh_config(vars.D1, "route-map test permit 1")
st.vtysh_show(vars.D1, "show ip prefix-list")
st.vtysh_config(vars.D1, "end")
st.vtysh_config(vars.D1, "ip prefix-list test permit 5.5.5.0/24")
st.vtysh_config(vars.D1, "route-map test permit 1")
st.vtysh_show(vars.D1, "show ip prefix-list")
st.vtysh_config(vars.D1, "exit")
st.report_pass("operation_successful")
def config_igmp_qmrestime(dut, **kwargs):
"""
Config IGMP.
Author: Sathishkumar Sivashanmugam ([email protected])
:param :dut:
:param :cli_type: click|klish
:return:
"""
if 'port_alias' not in kwargs:
st.error("Mandatory parameter port_alias not found")
return False
if 'qmrestime' not in kwargs:
st.error("Mandatory parameter query max response time not found")
return False
if 'config' in kwargs:
config = kwargs['config']
else:
config = 'yes'
cli_type = st.get_ui_type(dut, **kwargs)
if cli_type == "klish":
commands = list()
commands.append("interface {}".format(kwargs.get('port_alias')))
if config.lower() == 'yes':
commands.append("ip igmp query-max-response-time {}".format(kwargs.get('qmrestime')))
else:
commands.append("no ip igmp query-max-response-time")
commands.append("exit")
else:
st.error("UNSUPPORTED CLI TYPE -- {}".format(cli_type))
return False
# Here handling the error while passing invalid parameters
if kwargs.get('skip_error'):
output = st.config(dut, commands, skip_error_check=kwargs.get('skip_error'), type=cli_type)
errstr = ''
if errstr in output or '% Error: Illegal parameter.' in output:
return True
else:
return False
else:
try:
st.config(dut, commands, type=cli_type)
except Exception as e:
st.log(e)
return False
#Verify FRR DB
try:
output = st.vtysh_show(dut, "show running-config | include igmp query-max-response-time", skip_tmpl=True)
return bool(len(output))
except Exception as e:
st.log(e)
return False
def test_vtysh_modes_check_1():
vars = st.get_testbed_vars()
# Command in Config level - no mode change - with end and exit
st.vtysh_config(vars.D1, "ip prefix-list test permit 5.5.5.0/24")
st.vtysh_show(vars.D1, "show ip prefix-list")
st.vtysh_config(vars.D1, "end")
st.vtysh_config(vars.D1, "ip prefix-list test permit 5.5.5.0/24")
st.vtysh_show(vars.D1, "show ip prefix-list")
st.vtysh_config(vars.D1, "exit")
st.vtysh_config(vars.D1, "line vty")
st.vtysh_config(vars.D1, "end")
st.vtysh_config(vars.D1, "line vty")
st.vtysh_config(vars.D1, "exit")
st.report_pass("operation_successful")
def test_vtysh_modes_check_4():
vars = st.get_testbed_vars()
# Multiple commands in Config level - with multiple mode change - with end and exit
st.vtysh_config(vars.D1, "router bgp 65100")
st.vtysh_show(vars.D1, "show ip bgp")
st.vtysh_config(vars.D1, "end")
st.vtysh_config(vars.D1, "router bgp 65100")
st.vtysh_show(vars.D1, "show ip bgp")
st.vtysh_config(vars.D1, "end")
st.vtysh_config(vars.D1, "router bgp 65100")
st.vtysh_config(vars.D1, "address-family ipv4 unicast")
st.vtysh_config(vars.D1, "bgp dampening")
st.vtysh_show(vars.D1, "show ip bgp")
st.vtysh_config(vars.D1, "end")
st.vtysh_config(vars.D1, "router bgp 65100")
st.vtysh_config(vars.D1, "address-family ipv4 unicast")
st.vtysh_config(vars.D1, "bgp dampening")
st.vtysh_show(vars.D1, "show ip bgp")
st.vtysh_config(vars.D1, "exit")
st.report_pass("operation_successful")
def test_all_modes_check_1():
vars = st.get_testbed_vars()
# from sonic to mgmt-cli mode
st.show(vars.D1, "show ip interfaces")
st.change_prompt(vars.D1, "mgmt-user")
st.cli_show(vars.D1, "show interface status", skip_tmpl=True)
# from mgmt-cli to sonic mode
st.change_prompt(vars.D1, "normal-user")
# from sonic to mgmt-cli interface mode
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet4")
# from sonic to mgmt-cli interface mode with different interface
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet40")
st.cli_show(vars.D1, "show interface status", skip_tmpl=True)
st.cli_show(vars.D1, "show interface status | no-more ", skip_tmpl=True)
# from mgmt-cli interface to sonic mode
st.change_prompt(vars.D1, "normal-user")
# from mgmt-cli interface mode to mgmt-cli acl mode and commands after mode change
st.change_prompt(vars.D1, "mgmt-ipv4-acl-config", aclname="MyACL")
# from sonic to mgmt-cli interface mode with different interface
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet40")
# from mgmt-cli Config to various different modes and vice versa
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet4")
st.show(vars.D1, "show neighbors", type="lldp")
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet4")
st.vtysh_show(vars.D1, "show ip bgp")
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet4")
st.vtysh_config(vars.D1, "do show ip bgp")
st.change_prompt(vars.D1, "mgmt-intf-config", interface="Ethernet4")
st.show(vars.D1, "show interfaces status")
# from mgmt-cli normal mode to various different modes and vice versa
st.change_prompt(vars.D1, "mgmt-user")
st.show(vars.D1, "show neighbors", type="lldp")
st.change_prompt(vars.D1, "mgmt-user")
st.vtysh_show(vars.D1, "show ip bgp")
st.change_prompt(vars.D1, "mgmt-user")
st.vtysh_config(vars.D1, "do show ip bgp")
st.change_prompt(vars.D1, "mgmt-user")
st.show(vars.D1, "show interfaces status")
# from lldp mode to remaining modes and vice versa
st.show(vars.D1, "show neighbors", type="lldp")
st.vtysh_show(vars.D1, "show ip bgp")
st.show(vars.D1, "show neighbors", type="lldp")
st.vtysh_config(vars.D1, "do show ip bgp")
st.show(vars.D1, "show neighbors", type="lldp")
st.show(vars.D1, "show interfaces status")
# from vtysh config mode to remaining modes and vice versa
st.vtysh_config(vars.D1, "do show ip bgp")
st.vtysh_show(vars.D1, "show ip route")
st.vtysh_config(vars.D1, "do show ip bgp")
st.show(vars.D1, "show interfaces status")
# from vtysh mode to remaining modes and vice versa
st.vtysh_show(vars.D1, "show ip bgp")
st.show(vars.D1, "show interfaces status")
st.report_pass("operation_successful")