def load_gml(path, prj):
'''This function loads buildings from a CityGML file
Parameters
----------
path: string
path of CityGML file
prj: Project()
Teaser instance of Project()
'''
xml_file = open(path, 'r')
gml_bind = citygml.CreateFromDocument(xml_file.read())
for i, city_object in enumerate(gml_bind.featureMember):
if city_object.Feature.consistsOfBuildingPart:
for part in city_object.Feature.consistsOfBuildingPart:
if part.BuildingPart.function:
if part.BuildingPart.function[0].value() == "1000":
bldg = SingleFamilyDwelling(parent=prj,
name=part.BuildingPart.id)
elif part.BuildingPart.function[0].value() == "1120":
bldg = Office(parent=prj,
name=part.BuildingPart.id)
else:
bldg = Building(parent=prj,
name=part.BuildingPart.id)
else:
bldg = Building(parent=prj,
name=part.BuildingPart.id)
_create_building_part(bldg=bldg, part=part)
_set_attributes(bldg=bldg, gml_bldg=part.BuildingPart)
bldg.set_height_gml()
else:
if city_object.Feature.function:
if city_object.Feature.function[0].value() == "1000":
bldg = SingleFamilyDwelling(parent=prj,
name=city_object.Feature.id)
elif city_object.Feature.function[0].value() == "1120":
bldg = Office(parent=prj,
name=city_object.Feature.id)
else:
bldg = Building(parent=prj,
name=city_object.Feature.id)
else:
bldg = Building(parent=prj,
name=city_object.Feature.id)
_create_building(bldg=bldg, city_object=city_object)
_set_attributes(bldg=bldg, gml_bldg=city_object.Feature)
bldg.set_height_gml()
try:
bldg.set_gml_attributes()
except:
pass
def building_test2(prj):
"""
building which is hardcoded for testing
"""
bldg = Building(parent=prj)
'''Set some building parameters'''
bldg.name = "UnitTestBuilding"
bldg.street_name = "Unit Street 42"
bldg.city = "46325 Testing Town"
bldg.year_of_construction = 1988
bldg.number_of_floors = 1
bldg.height_of_floors = 3.5
'''Instantiate a ThermalZone class, with building as parent and set some
parameters of the thermal zone'''
tz = ThermalZone(parent=bldg)
tz.name = "Living Room"
tz.area = 140.0
tz.volume = tz.area * bldg.number_of_floors * bldg.height_of_floors
tz.infiltration_rate = 0.5
tz.use_conditions = BoundaryConditions(tz)
tz.use_conditions.usage = "Living"
tz.use_conditions.cooling_time = [5, 18]
tz.use_conditions.heating_time = [5, 18]
tz.use_conditions.set_temp_heat = 288.15
tz.use_conditions.set_temp_cool = 298.15
tz.use_conditions.temp_set_back = 4.0
tz.use_conditions.min_air_exchange = 0.0
tz.use_conditions.min_ahu = 0.0
tz.use_conditions.max_ahu = 2.6
tz.use_conditions.with_ahu = True
tz.use_conditions.persons = 3
tz.use_conditions.machines = 3
tz.use_conditions.lighting_power = 3
tz.use_conditions.activity_type_machines = 2
tz.use_conditions.ratio_conv_rad_machines = 0.5
tz.use_conditions.profile_machines = [0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6,
0.8, 0.8, 0.4, 0.2, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0]
tz.use_conditions.profile_persons = [0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1,
0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6,
0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1,
0.1, 0.1, 0.1]
tz.use_conditions.profile_lighting = [0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1,
0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6,
0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1,
0.1, 0.1, 0.1]
tz.use_conditions.use_constant_ach_rate = False
tz.use_conditions.base_ach = 0.2
tz.use_conditions.max_user_ach = 1.0
tz.use_conditions.max_overheating_ach = [3.0, 2.0]
tz.use_conditions.max_summer_ach = [1.0, 273.15 + 10, 273.15 + 17]
tz.use_conditions.winter_reduction = [0.2, 273.15, 273.15 + 10]
out_wall_dict = [["Outer Wall 1", [bldg.year_of_construction, 'heavy',
10.0, 90.0, 0.0]],
["Outer Wall 2", [bldg.year_of_construction, 'heavy',
14.0, 90.0, 90.0]],
["Outer Wall 3", [bldg.year_of_construction, 'heavy',
10.0, 90.0, 180.0]],
["Outer Wall 4", [bldg.year_of_construction, 'heavy',
14.0, 90.0, 270.0]]]
#import collections
#out_wall_dict = collections.OrderedDict(sorted(out_wall_dict.items(), key=lambda t: t[0]))
for value in out_wall_dict:
'''instantiate OuterWall class'''
out_wall = OuterWall(parent=tz)
out_wall.name = value[0]
out_wall.year_of_construction = value[1][0]
out_wall.construction_type = value[1][1]
out_wall.area = value[1][2]
out_wall.tilt = value[1][3]
out_wall.orientation = value[1][4]
out_wall.building_age_group = [1994, 1998]
out_wall.inner_radiation = 5.0
out_wall.inner_convection = 2.7
out_wall.outer_radiation = 5.0
out_wall.outer_convection = 20.0
out_wall_layer1 = Layer(out_wall)
out_wall_layer1.id = 1
out_wall_layer1.thickness = 5.0
out_wall_material = Material(out_wall_layer1)
out_wall_material.name = "material1"
out_wall_material.density = 5.0
out_wall_material.thermal_conduc = 4.0
out_wall_material.heat_capac = 0.48
out_wall_material.transmittance = 0.0
out_wall_layer2 = Layer(out_wall)
out_wall_layer2.id = 2
out_wall_layer2.thickness = 2.0
out_wall_material = Material(out_wall_layer2)
out_wall_material.name = "material"
out_wall_material.density = 2.0
out_wall_material.thermal_conduc = 2.0
out_wall_material.heat_capac = 0.84
out_wall_material.transmittance = 0.0
in_wall_dict = [["Inner Wall 1", [bldg.year_of_construction, 'light', 10.0]],
["Inner Wall 2", [bldg.year_of_construction, 'heavy', 14.0]],
["Inner Wall 3", [bldg.year_of_construction, 'light', 10.0]]]
for value in in_wall_dict:
'''instantiate OuterWall class'''
in_wall = InnerWall(parent=tz)
in_wall.name = value[0]
in_wall.year_of_construction = value[1][0]
in_wall.construction_type = value[1][1]
in_wall.area = value[1][2]
in_wall.building_age_group = [1994, 1998]
in_wall.inner_radiation = 5.0
in_wall.inner_convection = 2.7
in_wall_layer1 = Layer(in_wall)
in_wall_layer1.id = 1
in_wall_layer1.thickness = 5.0
in_wall_material = Material(in_wall_layer1)
in_wall_material.name = "material1"
in_wall_material.density = 5.0
in_wall_material.thermal_conduc = 4.0
in_wall_material.heat_capac = 0.48
in_wall_layer2 = Layer(in_wall)
in_wall_layer2.id = 2
in_wall_layer2.thickness = 2.0
in_wall_material = Material(in_wall_layer2)
in_wall_material.name = "material"
in_wall_material.density = 2.0
in_wall_material.thermal_conduc = 2.0
in_wall_material.heat_capac = 0.84
win_dict = [["Window 1", [bldg.year_of_construction,
5.0, 90.0, 90.0]],
["Window 2", [bldg.year_of_construction,
8.0, 90.0, 180.0]],
["Window 3", [bldg.year_of_construction,
5.0, 90.0, 270.0]]]
for value in win_dict:
win = Window(parent=tz)
win.construction_type = "Window"
win.name = value[0]
win.area = value[1][1]
win.tilt = value[1][2]
win.orientation = value[1][3]
win.building_age_group = [1994, 1998]
win.inner_convection = 1.7
win.inner_radiation = 5.0
win.outer_convection = 20.0
win.outer_radiation = 5.0
win.g_value = 0.789
win.a_conv = 0.03
win.shading_g_total = 1.0
win.shading_max_irr = 180.0
win_layer = Layer(parent=win)
win_layer.id = 1
win_layer.thickness = 0.024
win_material = Material(win_layer)
win_material.name = "GlasWindow"
win_material.thermal_conduc = 0.067
win_material.transmittance = 0.9
roof = Rooftop(parent=tz)
roof.name = "Roof"
roof.year_of_construction = bldg.year_of_construction
roof.construction_type = "heavy"
roof.area = 140.0
roof_layer1 = Layer(roof)
roof_layer1.id = 1
roof_layer1.thickness = 5.0
roof_material = Material(roof_layer1)
roof_material.name = "material1"
roof_material.density = 5.0
roof_material.thermal_conduc = 4.0
roof_material.heat_capac = 0.48
roof_layer2 = Layer(roof)
roof_layer2.id = 2
roof_layer2.thickness = 2.0
roof_material = Material(roof_layer2)
roof_material.name = "material"
roof_material.density = 2.0
roof_material.thermal_conduc = 2.0
roof_material.heat_capac = 0.84
ground = GroundFloor(parent=tz)
ground.name = "ground"
ground.year_of_construction = bldg.year_of_construction
ground.construction_type = "heavy"
ground.area = 140.0
ground_layer1 = Layer(ground)
ground_layer1.id = 1
ground_layer1.thickness = 5.0
ground_material = Material(ground_layer1)
ground_material.name = "material1"
ground_material.density = 5.0
ground_material.thermal_conduc = 4.0
ground_material.heat_capac = 0.48
ground_layer2 = Layer(ground)
ground_layer2.id = 2
ground_layer2.thickness = 2.0
ground_material = Material(ground_layer2)
ground_material.name = "material"
ground_material.density = 2.0
ground_material.thermal_conduc = 2.0
ground_material.heat_capac = 0.84
return bldg
def building_test2(prj):
"""
building which is hardcoded for testing
"""
bldg = Building(parent = prj)
'''Set some building parameters'''
bldg.name = "UnitTestBuilding"
bldg.street_name = "Unit Street 42"
bldg.city = "46325 Testing Town"
bldg.year_of_construction = 1988
bldg.number_of_floors = 1
bldg.height_of_floors = 3.5
'''Instantiate a ThermalZone class, with building as parent and set some
parameters of the thermal zone'''
tz = ThermalZone(parent = bldg)
tz.name = "Living Room"
tz.area = 140.0
tz.volume = tz.area * bldg.number_of_floors * bldg.height_of_floors
tz.infiltration_rate = 0.5
tz.use_conditions = BoundaryConditions(tz)
tz.use_conditions.usage = "Living"
tz.use_conditions.cooling_time = [5,18]
tz.use_conditions.heating_time = [5,18]
tz.use_conditions.set_temp_heat = 288.15
tz.use_conditions.set_temp_cool = 298.15
tz.use_conditions.temp_set_back= 4.0
tz.use_conditions.min_air_exchange= 0.0
tz.use_conditions.min_ahu= 0.0
tz.use_conditions.max_ahu = 2.6
tz.use_conditions.with_ahu = True
tz.use_conditions.persons = 3
tz.use_conditions.machines = 3
tz.use_conditions.lighting_power = 3
tz.use_conditions.activity_type_machines = 2
tz.use_conditions.ratio_conv_rad_machines = 0.5
tz.use_conditions.profile_machines = [0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0,
0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6,
0.8, 0.8, 0.4, 0.2, 0.0, 0.0, 0.0,
0.0, 0.0, 0.0]
tz.use_conditions.profile_persons = [0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1,
0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6,
0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1,
0.1, 0.1, 0.1]
tz.use_conditions.profile_lighting = [0.1, 0.1, 0.1, 0.1, 0.1, 0.1, 0.1,
0.2, 0.4, 0.6, 0.8, 0.8, 0.4, 0.6,
0.8, 0.8, 0.4, 0.2, 0.1, 0.1, 0.1,
0.1, 0.1, 0.1]
tz.use_conditions.use_constant_ach_rate = False
tz.use_conditions.base_ach = 0.2
tz.use_conditions.max_user_ach = 1.0
tz.use_conditions.max_overheating_ach = [3.0, 2.0]
tz.use_conditions.max_summer_ach = [1.0, 273.15 + 10, 273.15 + 17]
tz.use_conditions.winter_reduction = [0.2, 273.15, 273.15 + 10]
out_wall_dict = [["Outer Wall 1", [bldg.year_of_construction, 'heavy',
10.0, 90.0, 0.0]],
["Outer Wall 2", [bldg.year_of_construction, 'heavy',
14.0, 90.0, 90.0]],
["Outer Wall 3", [bldg.year_of_construction, 'heavy',
10.0, 90.0, 180.0]],
["Outer Wall 4", [bldg.year_of_construction, 'heavy',
14.0, 90.0, 270.0]]]
#import collections
#out_wall_dict = collections.OrderedDict(sorted(out_wall_dict.items(), key=lambda t: t[0]))
for value in out_wall_dict:
'''instantiate OuterWall class'''
out_wall = OuterWall(parent = tz)
out_wall.name = value[0]
out_wall.year_of_construction = value[1][0]
out_wall.construction_type = value[1][1]
out_wall.area = value[1][2]
out_wall.tilt = value[1][3]
out_wall.orientation = value[1][4]
out_wall.building_age_group = [1994, 1998]
out_wall.inner_radiation = 5.0
out_wall.inner_convection = 2.7
out_wall.outer_radiation = 5.0
out_wall.outer_convection = 20.0
out_wall_layer1 = Layer(out_wall)
out_wall_layer1.id = 1
out_wall_layer1.thickness = 5.0
out_wall_material = Material(out_wall_layer1)
out_wall_material.name = "material1"
out_wall_material.density = 5.0
out_wall_material.thermal_conduc = 4.0
out_wall_material.heat_capac = 0.48
out_wall_material.transmittance = 0.0
out_wall_layer2 = Layer(out_wall)
out_wall_layer2.id = 2
out_wall_layer2.thickness = 2.0
out_wall_material = Material(out_wall_layer2)
out_wall_material.name = "material"
out_wall_material.density = 2.0
out_wall_material.thermal_conduc = 2.0
out_wall_material.heat_capac = 0.84
out_wall_material.transmittance = 0.0
in_wall_dict = [["Inner Wall 1", [bldg.year_of_construction, 'light', 10.0]],
["Inner Wall 2", [bldg.year_of_construction, 'heavy', 14.0]],
["Inner Wall 3", [bldg.year_of_construction, 'light', 10.0]]]
for value in in_wall_dict:
'''instantiate OuterWall class'''
in_wall = InnerWall(parent = tz)
in_wall.name = value[0]
in_wall.year_of_construction = value[1][0]
in_wall.construction_type = value[1][1]
in_wall.area = value[1][2]
in_wall.building_age_group = [1994, 1998]
in_wall.inner_radiation = 5.0
in_wall.inner_convection = 2.7
in_wall_layer1 = Layer(in_wall)
in_wall_layer1.id = 1
in_wall_layer1.thickness = 5.0
in_wall_material = Material(in_wall_layer1)
in_wall_material.name = "material1"
in_wall_material.density = 5.0
in_wall_material.thermal_conduc = 4.0
in_wall_material.heat_capac = 0.48
in_wall_layer2 = Layer(in_wall)
in_wall_layer2.id = 2
in_wall_layer2.thickness = 2.0
in_wall_material = Material(in_wall_layer2)
in_wall_material.name = "material"
in_wall_material.density = 2.0
in_wall_material.thermal_conduc = 2.0
in_wall_material.heat_capac = 0.84
win_dict = [["Window 1", [bldg.year_of_construction,
5.0, 90.0, 90.0]],
["Window 2", [bldg.year_of_construction,
8.0, 90.0, 180.0]],
["Window 3", [bldg.year_of_construction,
5.0, 90.0, 270.0]]]
for value in win_dict:
win = Window(parent = tz)
win.construction_type = "Window"
win.name = value[0]
win.area = value[1][1]
win.tilt = value[1][2]
win.orientation = value[1][3]
win.building_age_group = [1994, 1998]
win.inner_convection = 1.7
win.inner_radiation = 5.0
win.outer_convection = 20.0
win.outer_radiation = 5.0
win.g_value = 0.789
win.a_conv = 0.03
win.shading_g_total = 1.0
win.shading_max_irr = 180.0
win_layer = Layer(parent = win)
win_layer.id = 1
win_layer.thickness = 0.024
win_material = Material(win_layer)
win_material.name = "GlasWindow"
win_material.thermal_conduc = 0.067
win_material.transmittance = 0.9
roof = Rooftop(parent = tz)
roof.name = "Roof"
roof.year_of_construction = bldg.year_of_construction
roof.construction_type = "heavy"
roof.area = 140.0
roof_layer1 = Layer(roof)
roof_layer1.id = 1
roof_layer1.thickness = 5.0
roof_material = Material(roof_layer1)
roof_material.name = "material1"
roof_material.density = 5.0
roof_material.thermal_conduc = 4.0
roof_material.heat_capac = 0.48
roof_layer2 = Layer(roof)
roof_layer2.id = 2
roof_layer2.thickness = 2.0
roof_material = Material(roof_layer2)
roof_material.name = "material"
roof_material.density = 2.0
roof_material.thermal_conduc = 2.0
roof_material.heat_capac = 0.84
ground = GroundFloor(parent = tz)
ground.name = "ground"
ground.year_of_construction = bldg.year_of_construction
ground.construction_type = "heavy"
ground.area = 140.0
ground_layer1 = Layer(ground)
ground_layer1.id = 1
ground_layer1.thickness = 5.0
ground_material = Material(ground_layer1)
ground_material.name = "material1"
ground_material.density = 5.0
ground_material.thermal_conduc = 4.0
ground_material.heat_capac = 0.48
ground_layer2 = Layer(ground)
ground_layer2.id = 2
ground_layer2.thickness = 2.0
ground_material = Material(ground_layer2)
ground_material.name = "material"
ground_material.density = 2.0
ground_material.thermal_conduc = 2.0
ground_material.heat_capac = 0.84
return bldg
def import_building_from_excel(project, building_name, construction_age,
path_to_excel, sheet_names):
"""
Import building data from excel, convert it via the respective zoning and feed it to teasers logic classes.
Pay attention to hard coded parts, which are marked.
Parameters
----------
project: Project()
TEASER instance of Project
building_name: str
name of building to be set in the project
construction_age: int [y]
construction age of the building
path_to_excel: str
path to excel file to be imported
sheet_names: str or list
sheet names which shall be imported
return data: pandas.DataFrame
zoned DataFrame which is finally used to parametrize the teaser classes
return project: Project()
TEASER instance of Project filled with the imported building data
"""
def warn_constructiontype(element):
"""Generic warning function"""
if element.construction_type is None:
warnings.warn(
'In zone "%s" the %s construction "%s" could not be loaded from the TypeBuildingElements.json, '
"an error will occur due to missing data for calculation."
"Check for spelling and the correct combination of building age and construction type."
"Here is the list of faulty entries:\n%s"
"\nThese entries can easily be found checking the stated index in the produced ZonedInput.xlsx"
% (
group["zone"].iloc[0],
element.name,
group["OuterWallConstruction"].iloc[0],
group,
))
bldg = Building(parent=project)
bldg.name = building_name
bldg.year_of_construction = construction_age
bldg.with_ahu = True # HardCodedInput
if bldg.with_ahu is True:
bldg.central_ahu.heat_recovery = True # HardCodedInput
bldg.central_ahu.efficiency_recovery = 0.35 # HardCodedInput
bldg.central_ahu.temperature_profile = 25 * [273.15 + 18
] # HardCodedInput
bldg.central_ahu.min_relative_humidity_profile = 25 * [
0
] # HardCodedInput
bldg.central_ahu.max_relative_humidity_profile = 25 * [
1
] # HardCodedInput
bldg.central_ahu.v_flow_profile = 25 * [1] # HardCodedInput
# Parameters that need hard coding in teasers logic classes
# 1. "use_set_back" needs hard coding at aixlib.py in the init; defines
# if the in the useconditions stated
# heating_time with the respective set_back_temp should be applied.
# use_set_back = false -> all hours of the day
# have same set_temp_heat actual value: use_set_back = Check your current version!
# 2. HeaterOn, CoolerOn, hHeat, lCool, etc. can be hard coded in the text
# file
# "teaser / data / output / modelicatemplate / AixLib /
# AixLib_ThermalZoneRecord_TwoElement"
# actual changes: Check your current version!
# Parameters to be set for each and every zone (#HardCodedInput)
# -----------------------------
out_wall_tilt = 90
window_tilt = 90
ground_floor_tilt = 0
floor_tilt = 0
ceiling_tilt = 0
rooftop_tilt = 0
ground_floor_orientation = -2
floor_orientation = -2
rooftop_orientation = -1
ceiling_orientation = -1
# -----------------------------
# load_building_data from excel_to_pandas DataFrame:
data = import_data(path_to_excel, sheet_names)
# informative print
usage_types = get_list_of_present_entries(data["UsageType"])
print("List of present usage_types in the original Data set: \n%s" %
usage_types)
# define the zoning methodology/function
data = zoning_example(data)
# informative print
usage_types = get_list_of_present_entries(data["Zone"])
print("List of zones after the zoning is applied: \n%s" % usage_types)
# aggregate all rooms of each zone and for each set general parameter,
# boundary conditions
# and parameter regarding the building physics
zones = data.groupby(["Zone"])
for name, zone in zones:
# Block: Thermal zone (general parameter)
tz = ThermalZone(parent=bldg)
tz.name = str(name)
tz.area = zone["NetArea[m²]"].sum()
# room vice calculation of volume plus summing those
tz.volume = (np.array(zone["NetArea[m²]"]) *
np.array(zone["HeatedRoomHeight[m]"])).sum()
# Block: Boundary Conditions
# load UsageOperationTime, Lighting, RoomClimate and InternalGains
# from the "UseCondition.json"
tz.use_conditions = UseConditions(parent=tz)
tz.use_conditions.load_use_conditions(zone["Zone"].iloc[0],
project.data)
# Block: Building Physics
# Grouping by orientation and construction type
# aggregating and feeding to the teaser logic classes
grouped = zone.groupby(
["OuterWallOrientation[°]", "OuterWallConstruction"])
for name, group in grouped:
# looping through a groupby object automatically discards the
# groups where one of the attributes is nan
# additionally check for strings, since the value must be of type
# int or float
if not isinstance(group["OuterWallOrientation[°]"].iloc[0], str):
out_wall = OuterWall(parent=tz)
out_wall.name = (
"outer_wall_" +
str(int(group["OuterWallOrientation[°]"].iloc[0])) + "_" +
str(group["OuterWallConstruction"].iloc[0]))
out_wall.area = group["OuterWallArea[m²]"].sum()
out_wall.tilt = out_wall_tilt
out_wall.orientation = group["OuterWallOrientation[°]"].iloc[0]
# load wall properties from "TypeBuildingElements.json"
out_wall.load_type_element(
year=bldg.year_of_construction,
construction=group["OuterWallConstruction"].iloc[0],
)
warn_constructiontype(out_wall)
else:
warnings.warn(
'In zone "%s" the OuterWallOrientation "%s" is '
"neither float nor int, "
"hence this building element is not added.\nHere is the "
"list of faulty entries:\n%s"
"\n These entries can easily be found checking the stated "
"index in the produced ZonedInput.xlsx" % (
group["Zone"].iloc[0],
group["OuterWallOrientation[°]"].iloc[0],
group,
))
grouped = zone.groupby(["WindowOrientation[°]", "WindowConstruction"])
for name, group in grouped:
# looping through a groupby object automatically discards the
# groups where one of the attributes is nan
# additionally check for strings, since the value must be of type
# int or float
if not isinstance(group["OuterWallOrientation[°]"].iloc[0], str):
window = Window(parent=tz)
window.name = (
"window_" +
str(int(group["WindowOrientation[°]"].iloc[0])) + "_" +
str(group["WindowConstruction"].iloc[0]))
window.area = group["WindowArea[m²]"].sum()
window.tilt = window_tilt
window.orientation = group["WindowOrientation[°]"].iloc[0]
# load wall properties from "TypeBuildingElements.json"
window.load_type_element(
year=bldg.year_of_construction,
construction=group["WindowConstruction"].iloc[0],
)
warn_constructiontype(window)
else:
warnings.warn(
'In zone "%s" the window orientation "%s" is neither '
"float nor int, "
"hence this building element is not added. Here is the "
"list of faulty entries:\n%s"
"\nThese entries can easily be found checking the stated "
"index in the produced ZonedInput.xlsx" % (
group["Zone"].iloc[0],
group["WindowOrientation[°]"].iloc[0],
group,
))
grouped = zone.groupby(["IsGroundFloor", "FloorConstruction"])
for name, group in grouped:
if group["NetArea[m²]"].sum() != 0: # to avoid devision by 0
if group["IsGroundFloor"].iloc[0] == 1:
ground_floor = GroundFloor(parent=tz)
ground_floor.name = "ground_floor" + str(
group["FloorConstruction"].iloc[0])
ground_floor.area = group["NetArea[m²]"].sum()
ground_floor.tilt = ground_floor_tilt
ground_floor.orientation = ground_floor_orientation
# load wall properties from "TypeBuildingElements.json"
ground_floor.load_type_element(
year=bldg.year_of_construction,
construction=group["FloorConstruction"].iloc[0],
)
warn_constructiontype(ground_floor)
elif group["IsGroundFloor"].iloc[0] == 0:
floor = Floor(parent=tz)
floor.name = "floor" + str(
group["FloorConstruction"].iloc[0])
floor.area = group["NetArea[m²]"].sum() / 2 # only half of
# the floor belongs to this story
floor.tilt = floor_tilt
floor.orientation = floor_orientation
# load wall properties from "TypeBuildingElements.json"
floor.load_type_element(
year=bldg.year_of_construction,
construction=group["FloorConstruction"].iloc[0],
)
warn_constructiontype(floor)
else:
warnings.warn(
"Values for IsGroundFloor have to be either 0 or 1, "
"for no or yes respectively")
else:
warnings.warn(
'zone "%s" with IsGroundFloor "%s" and construction '
'type "%s" '
"has no floor nor groundfloor, since the area equals 0." %
(
group["Zone"].iloc[0],
group["IsGroundFloor"].iloc[0],
group["FloorConstruction"].iloc[0],
))
grouped = zone.groupby(["IsRooftop", "CeilingConstruction"])
for name, group in grouped:
if group["NetArea[m²]"].sum() != 0: # to avoid devision by 0
if group["IsRooftop"].iloc[0] == 1:
rooftop = Rooftop(parent=tz)
rooftop.name = "rooftop" + str(
group["CeilingConstruction"].iloc[0])
rooftop.area = group["NetArea[m²]"].sum(
) # sum up area of respective
# rooftop parts
rooftop.tilt = rooftop_tilt
rooftop.orientation = rooftop_orientation
# load wall properties from "TypeBuildingElements.json"
rooftop.load_type_element(
year=bldg.year_of_construction,
construction=group["CeilingConstruction"].iloc[0],
)
warn_constructiontype(rooftop)
elif group["IsRooftop"].iloc[0] == 0:
ceiling = Ceiling(parent=tz)
ceiling.name = "ceiling" + str(
group["CeilingConstruction"].iloc[0])
ceiling.area = group["NetArea[m²]"].sum() / 2 # only half
# of the ceiling belongs to a story,
# the other half to the above
ceiling.tilt = ceiling_tilt
ceiling.orientation = ceiling_orientation
# load wall properties from "TypeBuildingElements.json"
ceiling.load_type_element(
year=bldg.year_of_construction,
construction=group["CeilingConstruction"].iloc[0],
)
warn_constructiontype(ceiling)
else:
warnings.warn(
"Values for IsRooftop have to be either 0 or 1, "
"for no or yes respectively")
else:
warnings.warn(
'zone "%s" with IsRooftop "%s" and construction type '
'"%s" '
"has no ceiling nor rooftop, since the area equals 0." % (
group["Zone"].iloc[0],
group["IsRooftop"].iloc[0],
group["CeilingConstruction"].iloc[0],
))
grouped = zone.groupby(["InnerWallConstruction"])
for name, group in grouped:
if group["InnerWallArea[m²]"].sum() != 0: # to avoid devision by 0
in_wall = InnerWall(parent=tz)
in_wall.name = "inner_wall" + str(
group["InnerWallConstruction"].iloc[0])
in_wall.area = group["InnerWallArea[m²]"].sum() / 2 # only
# half of the wall belongs to each room,
# the other half to the adjacent
# load wall properties from "TypeBuildingElements.json"
in_wall.load_type_element(
year=bldg.year_of_construction,
construction=group["InnerWallConstruction"].iloc[0],
)
warn_constructiontype(in_wall)
else:
warnings.warn(
'zone "%s" with inner wall construction "%s" has no '
"inner walls, since area = 0." %
(group["Zone"].iloc[0], group["InnerWallConstructio"
"n"].iloc[0]))
# Block: AHU and infiltration #Attention hard coding
# set the supply volume flow of the AHU per zone
ahu_dict = {
"Bedroom": [15.778, 15.778],
"Corridorsinthegeneralcarearea": [5.2941, 5.2941],
"Examinationortreatmentroom": [15.743, 15.743],
"MeetingConferenceseminar": [16.036, 16.036],
"Stocktechnicalequipmentarchives": [20.484, 20.484],
"WCandsanitaryroomsinnonresidentialbuildings": [27.692, 27.692],
}
_i = 0
for key in ahu_dict:
if tz.name == key:
tz.use_conditions.min_ahu = ahu_dict[key][0]
tz.use_conditions.max_ahu = ahu_dict[key][1]
_i = 1
if _i == 0:
warnings.warn(
"The zone %s could not be found in your ahu_dict. Hence, "
"no AHU flow is defined. The default value is "
"0 (min_ahu = 0; max_ahu=0" % tz.name)
return project, data
def _load_building(prj, pyxb_bld, type, project_bind):
if type == "Building":
bldg = Building(prj)
elif type == "Office":
bldg = Office(prj)
elif type == "Institute":
bldg = Institute(prj)
elif type == "Institute4":
bldg = Institute4(prj)
elif type == "Institute8":
bldg = Institute8(prj)
elif type == "Residential":
bldg = SingleFamilyDwelling(prj)
bldg.name = pyxb_bld.name
bldg.street_name = pyxb_bld.street_name
bldg.city = pyxb_bld.city
bldg.type_of_building = pyxb_bld.type_of_building
bldg.year_of_construction = pyxb_bld.year_of_construction
bldg.year_of_retrofit = pyxb_bld.year_of_retrofit
bldg.number_of_floors = pyxb_bld.number_of_floors
bldg.height_of_floors = pyxb_bld.height_of_floors
if not pyxb_bld.ThermalZone:
bldg.net_leased_area = pyxb_bld.net_leased_area
if pyxb_bld.CentralAHU:
pyxb_ahu = pyxb_bld.CentralAHU
bldg.central_ahu = BuildingAHU(bldg)
bldg.central_ahu.heating = pyxb_ahu.heating
bldg.central_ahu.cooling = pyxb_ahu.cooling
bldg.central_ahu.dehumidification = pyxb_ahu.dehumidification
bldg.central_ahu.humidification = pyxb_ahu.humidification
bldg.central_ahu.heat_recovery = pyxb_ahu.heat_recovery
bldg.central_ahu.by_pass_dehumidification = \
pyxb_ahu.by_pass_dehumidification
bldg.central_ahu.efficiency_recovery = pyxb_ahu.efficiency_recovery
try:
if float(project_bind.version) >= 0.5:
bldg.central_ahu.efficiency_recovery_false = \
pyxb_ahu.efficiency_recovery_false
else:
bldg.central_ahu.efficiency_recovery_false = \
pyxb_ahu.efficiency_revocery_false
except AttributeError:
bldg.central_ahu.efficiency_recovery_false = \
pyxb_ahu.efficiency_revocery_false
bldg.central_ahu.profile_min_relative_humidity = \
pyxb_ahu.profile_min_relative_humidity
bldg.central_ahu.profile_max_relative_humidity = \
pyxb_ahu.profile_max_relative_humidity
bldg.central_ahu.profile_v_flow = \
pyxb_ahu.profile_v_flow
bldg.central_ahu.profile_temperature = \
pyxb_ahu.profile_temperature
for pyxb_zone in pyxb_bld.ThermalZone:
zone = ThermalZone(bldg)
zone.name = pyxb_zone.name
zone.area = pyxb_zone.area
zone.volume = pyxb_zone.volume
zone.infiltration_rate = pyxb_zone.infiltration_rate
zone.use_conditions = BoundaryConditions(zone)
pyxb_use = pyxb_zone.UseCondition.BoundaryConditions
zone.use_conditions.typical_length = pyxb_zone.typical_length
zone.use_conditions.typical_width = pyxb_zone.typical_width
zone.use_conditions.usage = \
pyxb_use.usage
zone.use_conditions.usage_time = \
pyxb_use.UsageOperationTime.usage_time
zone.use_conditions.daily_usage_hours = \
pyxb_use.UsageOperationTime.daily_usage_hours
zone.use_conditions.yearly_usage_days = \
pyxb_use.UsageOperationTime.yearly_usage_days
zone.use_conditions.yearly_usage_hours_day = \
pyxb_use.UsageOperationTime.yearly_usage_hours_day
zone.use_conditions.yearly_usage_hours_night = \
pyxb_use.UsageOperationTime.yearly_usage_hours_night
zone.use_conditions.daily_operation_ahu_cooling = \
pyxb_use.UsageOperationTime.daily_operation_ahu_cooling
zone.use_conditions.yearly_heating_days = \
pyxb_use.UsageOperationTime.yearly_heating_days
zone.use_conditions.yearly_ahu_days = \
pyxb_use.UsageOperationTime.yearly_ahu_days
zone.use_conditions.yearly_cooling_days = \
pyxb_use.UsageOperationTime.yearly_cooling_days
zone.use_conditions.daily_operation_heating = \
pyxb_use.UsageOperationTime.daily_operation_heating
try:
if float(project_bind.version) >= 0.4:
zone.use_conditions.maintained_illuminance = \
pyxb_use.Lighting.maintained_illuminance
else:
zone.use_conditions.maintained_illuminance = \
pyxb_use.Lighting.maintained_illuminace
except AttributeError:
zone.use_conditions.maintained_illuminance = \
pyxb_use.Lighting.maintained_illuminace
zone.use_conditions.usage_level_height = \
pyxb_use.Lighting.usage_level_height
zone.use_conditions.red_factor_visual = \
pyxb_use.Lighting.red_factor_visual
zone.use_conditions.rel_absence = \
pyxb_use.Lighting.rel_absence
zone.use_conditions.room_index = \
pyxb_use.Lighting.room_index
zone.use_conditions.part_load_factor_lighting = \
pyxb_use.Lighting.part_load_factor_lighting
zone.use_conditions.ratio_conv_rad_lighting = \
pyxb_use.Lighting.ratio_conv_rad_lighting
zone.use_conditions.set_temp_heat = \
pyxb_use.RoomClimate.set_temp_heat
zone.use_conditions.set_temp_cool = \
pyxb_use.RoomClimate.set_temp_cool
zone.use_conditions.temp_set_back = \
pyxb_use.RoomClimate.temp_set_back
zone.use_conditions.min_temp_heat = \
pyxb_use.RoomClimate.min_temp_heat
zone.use_conditions.max_temp_cool = \
pyxb_use.RoomClimate.max_temp_cool
zone.use_conditions.rel_humidity = \
pyxb_use.RoomClimate.rel_humidity
zone.use_conditions.cooling_time = \
pyxb_use.RoomClimate.cooling_time
zone.use_conditions.heating_time = \
pyxb_use.RoomClimate.heating_time
zone.use_conditions.min_air_exchange = \
pyxb_use.RoomClimate.min_air_exchange
zone.use_conditions.rel_absence_ahu = \
pyxb_use.RoomClimate.rel_absence_ahu
zone.use_conditions.part_load_factor_ahu = \
pyxb_use.RoomClimate.part_load_factor_ahu
zone.use_conditions.persons = \
pyxb_use.InternalGains.persons
zone.use_conditions.profile_persons = \
pyxb_use.InternalGains.profile_persons
zone.use_conditions.machines = \
pyxb_use.InternalGains.machines
zone.use_conditions.profile_machines = \
pyxb_use.InternalGains.profile_machines
zone.use_conditions.lighting_power = \
pyxb_use.InternalGains.lighting_power
zone.use_conditions.profile_lighting = \
pyxb_use.InternalGains.profile_lighting
zone.use_conditions.min_ahu = \
pyxb_use.AHU.min_ahu
zone.use_conditions.max_ahu = \
pyxb_use.AHU.max_ahu
zone.use_conditions.with_ahu = \
pyxb_use.AHU.with_ahu
zone.use_constant_ach_rate = \
pyxb_use.AHU.use_constant_ach_rate
zone.base_ach = \
pyxb_use.AHU.base_ach
zone.max_user_ach = \
pyxb_use.AHU.max_user_ach
zone.max_overheating_ach = \
pyxb_use.AHU.max_overheating_ach
zone.max_summer_ach = \
pyxb_use.AHU.max_summer_ach
zone.winter_reduction = \
pyxb_use.AHU.winter_reduction
for pyxb_wall in pyxb_zone.OuterWall:
out_wall = OuterWall(zone)
set_basic_data_teaser(pyxb_wall, out_wall)
set_layer_data_teaser(pyxb_wall, out_wall)
try:
if float(project_bind.version) >= 0.6:
for pyxb_wall in pyxb_zone.Door:
out_wall = Door(zone)
set_basic_data_teaser(pyxb_wall, out_wall)
set_layer_data_teaser(pyxb_wall, out_wall)
except AttributeError:
pass
for pyxb_wall in pyxb_zone.Rooftop:
roof = Rooftop(zone)
set_basic_data_teaser(pyxb_wall, roof)
set_layer_data_teaser(pyxb_wall, roof)
# zone.outer_walls.append(roof)
for pyxb_wall in pyxb_zone.GroundFloor:
gr_floor = GroundFloor(zone)
set_basic_data_teaser(pyxb_wall, gr_floor)
set_layer_data_teaser(pyxb_wall, gr_floor)
# zone.outer_walls.append(gr_floor)
for pyxb_wall in pyxb_zone.InnerWall:
in_wall = InnerWall(zone)
set_basic_data_teaser(pyxb_wall, in_wall)
set_layer_data_teaser(pyxb_wall, in_wall)
# zone.inner_walls.append(in_wall)
for pyxb_wall in pyxb_zone.Ceiling:
ceiling = Ceiling(zone)
set_basic_data_teaser(pyxb_wall, ceiling)
set_layer_data_teaser(pyxb_wall, ceiling)
# zone.inner_walls.append(ceiling)
for pyxb_wall in pyxb_zone.Floor:
floor = Floor(zone)
set_basic_data_teaser(pyxb_wall, floor)
set_layer_data_teaser(pyxb_wall, floor)
# zone.inner_walls.append(floor)
for pyxb_win in pyxb_zone.Window:
win = Window(zone)
set_basic_data_teaser(pyxb_win, win)
set_layer_data_teaser(pyxb_win, win)
def click_add_new_building(self, current_project, openId):
"""
Lets CalcProject create a new building with the given ID.
"""
return Building(current_project, openId)
def example_create_building():
'''
Instantiate a Project class (with load_data set to true), instantiate a
Building class, with the project as a parent. This automatically adds the
specific building and all its future changes to the project.
'''
prj = Project(load_data=True)
bldg = Building(parent=prj)
'''Set some building parameters'''
bldg.name = "SuperExampleBuilding"
bldg.street_name = "Awesome Avenue 42"
bldg.city = "46325 Fantastic Town"
bldg.year_of_construction = 1988
bldg.number_of_floors = 1
bldg.height_of_floors = 3.5
'''Instantiate a ThermalZone class, with building as parent and set some
parameters of the thermal zone'''
tz = ThermalZone(parent=bldg)
tz.name = "Living Room"
tz.area = 140.0
tz.volume = tz.area * bldg.number_of_floors * bldg.height_of_floors
tz.infiltration_rate = 0.5
'''Instantiate UseConditions18599 class with thermal zone as parent,
and load the use conditions for the usage 'Living' '''
tz.use_conditions = BoundaryConditions(parent=tz)
tz.use_conditions.load_use_conditions("Living")
'''Define two elements representing a pitched roof and define Layers and
Materials explicitly'''
roof_south = Rooftop(parent=tz)
roof_south.name = "Roof_South"
roof_north = Rooftop(parent=tz)
roof_north.name = "Roof_North"
'''Set area, orientation and tilt of South Roof'''
roof_south.area = 75.0
roof_south.orientation = 180.0
roof_south.tilt = 55.0
'''Set coefficient of heat transfer'''
roof_south.inner_convection = 1.7
roof_south.outer_convection = 5.0
roof_south.inner_radiation = 20.0
roof_south.outer_radiation = 5.0
'''Set layer and material'''
layer_1s = Layer(parent=roof_south, id=0) # id indicates the order of
# layer from inside to outside
layer_1s.thickness = 0.15
material_1_2 = Material(layer_1s)
material_1_2.name = "Insulation"
material_1_2.density = 120.0
material_1_2.heat_capac = 0.04
material_1_2.thermal_conduc = 1.0
layer_2s = Layer(parent=roof_south, id=1)
layer_2s.thickness = 0.15
material_1_1 = Material(layer_2s)
material_1_1.name = "Tile"
material_1_1.density = 1400.0
material_1_1.heat_capac = 0.6
material_1_1.thermal_conduc = 2.5
'''Set area, orientation and tilt of North Roof'''
roof_north.area = 75.0
roof_north.orientation = 0.0
roof_north.tilt = 55.0
'''Set coefficient of heat transfer'''
roof_north.inner_convection = 1.7
roof_north.outer_convection = 5.0
roof_north.inner_radiation = 20.0
roof_north.outer_radiation = 5.0
'''Set layer and material'''
layer_1n = Layer(parent=roof_north, id=0)
layer_1n.thickness = 0.15
material_1_2 = Material(layer_1n)
material_1_2.name = "Insulation"
material_1_2.density = 120.0
material_1_2.heat_capac = 0.04
material_1_2.thermal_conduc = 1.0
layer_2n = Layer(parent=roof_north, id=1)
layer_2n.thickness = 0.15
layer_2n.position = 1
material_1_1 = Material(layer_2n)
material_1_1.name = "Tile"
material_1_1.density = 1400.0
material_1_1.heat_capac = 0.6
material_1_1.thermal_conduc = 2.5
'''We save information of the Outer and Inner walls as well as Windows
in dicts, the key is the name, while the value is a list (if applicable)
[year of construciton,
construction type,
area,
tilt,
orientation]
'''
out_wall_dict = {"Outer Wall 1": [bldg.year_of_construction, 'heavy',
10.0, 90.0, 0.0],
"Outer Wall 2": [bldg.year_of_construction, 'heavy',
14.0, 90.0, 90.0],
"Outer Wall 3": [bldg.year_of_construction, 'heavy',
10.0, 90.0, 180.0],
"Outer Wall 4": [bldg.year_of_construction, 'heavy',
14.0, 90.0, 270.0]}
in_wall_dict = {"Inner Wall 1": [bldg.year_of_construction, 'light', 10.0],
"Inner Wall 2": [bldg.year_of_construction, 'heavy', 14.0],
"Inner Wall 3": [bldg.year_of_construction, 'light', 10.0]}
win_dict = {"Window 1": [bldg.year_of_construction,
5.0, 90.0, 90.0],
"Window 2": [bldg.year_of_construction,
8.0, 90.0, 180.0],
"Window 3": [bldg.year_of_construction,
5.0, 90.0, 270.0]}
for key, value in out_wall_dict.items():
'''instantiate OuterWall class'''
out_wall = OuterWall(parent = tz)
out_wall.name = key
'''load typical construction, based on year of construction and
construction type'''
out_wall.load_type_element(year=value[0],
construction=value[1])
out_wall.area = value[2]
out_wall.tilt = value[3]
out_wall.orientation = value[4]
for key, value in in_wall_dict.items():
'''instantiate InnerWall class'''
in_wall = InnerWall(parent = tz)
in_wall.name = key
'''load typical construction, based on year of construction and
construction type'''
in_wall.load_type_element(year=value[0],
construction=value[1])
in_wall.area = value[2]
for key, value in win_dict.items():
'''instantiate Window class'''
win = Window(parent = tz)
win.name = key
win.area = value[1]
win.tilt = value[2]
win.orientation = value[3]
'''
We know the exact properties of the window, thus we set them instead
of loading a typical construction
'''
win.inner_convection = 1.7
win.inner_radiation = 5.0
win.outer_convection = 20.0
win.outer_radiation = 5.0
win.g_value = 0.789
win.a_conv = 0.03
win.shading_g_total = 1.0
win.shading_max_irr = 180.0
'''Instantiate a Layer class, with window as parent, set attributes'''
win_layer = Layer(parent = win)
win_layer.id = 1
win_layer.thickness = 0.024
'''Instantiate a Material class, with window layer as parent,
set attributes'''
win_material = Material(win_layer)
win_material.name = "GlasWindow"
win_material.thermal_conduc = 0.067
win_material.transmittance = 0.9
'''For a GroundFloor we are using the load_type_element function,
which needs the year of construction and the construction type ('heavy'
or 'light')
'''
ground = GroundFloor(parent=tz)
ground.name = "Ground floor"
ground.load_type_element(bldg.year_of_construction, 'heavy')
ground.area = 140.0
'''
We calculate the RC Values according to AixLib procedure
'''
prj.used_library_calc = 'AixLib'
prj.number_of_elements_calc = 2
prj.merge_windows_calc = False
prj.calc_all_buildings()
'''
Export the Modelica Record
'''
prj.export_aixlib(building_model="MultizoneEquipped",
zone_model="ThermalZoneEquipped",
corG=True,
internal_id=None,
path=None)
'''Or we use Annex60 method with for elements'''
#prj.calc_all_buildings(number_of_elements=4,
# merge_windows=False,
# used_library='Annex60')
#prj.export_annex()
'''
Save new TEASER XML and cityGML
'''
prj.save_project("ExampleProject")
prj.save_citygml("ExampleCityGML")
def example_create_building():
""""This function demonstrates generating a building adding all
information separately"""
# First step: Import the TEASER API (called Project) into your Python module
from teaser.project import Project
# To use the API instantiate the Project class and rename the Project. The
# parameter load_data=True indicates that we load data into our
# Project (e.g. for Material properties and typical wall constructions.
# This can take a few seconds, depending on the size of the used data base.
prj = Project(load_data=True)
prj.name = "BuildingExample"
# Instantiate a Building class and set the Project API as a parent to
# this building. This will automatically add this building and all its
# future changes to the project. This is helpful as we can use the data
# base and API functions (like explained in e2 - e5). We also set some
# building parameters. Be careful: Dymola does not like whitespaces in
# names and filenames, thus we will delete them anyway in TEASER.
from teaser.logic.buildingobjects.building import Building
bldg = Building(parent=prj)
bldg.name = "SuperExampleBuilding"
bldg.street_name = "AwesomeAvenue42"
bldg.city = "46325FantasticTown"
bldg.year_of_construction = 2015
bldg.number_of_floors = 1
bldg.height_of_floors = 3.5
# Instantiate a ThermalZone class and set the Building as a parent of it.
# Set some parameters of the thermal zone. Be careful: Dymola does not
# like whitespaces in names and filenames, thus we will delete them
# anyway in TEASER.
from teaser.logic.buildingobjects.thermalzone import ThermalZone
tz = ThermalZone(parent=bldg)
tz.name = "LivingRoom"
tz.area = 140.0
tz.volume = tz.area * bldg.number_of_floors * bldg.height_of_floors
tz.infiltration_rate = 0.5
# Instantiate BoundaryConditions and load conditions for `Living`.
from teaser.logic.buildingobjects.boundaryconditions.boundaryconditions \
import BoundaryConditions
tz.use_conditions = BoundaryConditions(parent=tz)
tz.use_conditions.load_use_conditions("Living", prj.data)
# Define two building elements reflecting a pitched roof (south = 180° and
# north = 0°). Setting the the ThermalZone as a parent will automatically
# assign this element to the thermal zone. We also set names, tilt and
# coefficients for heat transfer on the inner and outer side of the
# roofs. If the building has a flat roof, please use -1 as
# orientation. Please read the docs to get more information on these
# parameters.
from teaser.logic.buildingobjects.buildingphysics.rooftop import Rooftop
roof_south = Rooftop(parent=tz)
roof_south.name = "Roof_South"
roof_south.area = 75.0
roof_south.orientation = 180.0
roof_south.tilt = 55.0
roof_south.inner_convection = 1.7
roof_south.outer_convection = 20.0
roof_south.inner_radiation = 5.0
roof_south.outer_radiation = 5.0
roof_north = Rooftop(parent=tz)
roof_north.name = "Roof_North"
roof_north.area = 75.0
roof_north.orientation = 0.0
roof_north.tilt = 55.0
roof_north.inner_convection = 1.7
roof_north.outer_convection = 20.0
roof_north.inner_radiation = 5.0
roof_north.outer_radiation = 5.0
# To define the wall constructions we need to instantiate Layer and
# Material objects and set attributes. id indicates the order of wall
# construction from inside to outside (so 0 is on the inner surface). You
# need to set this value!
from teaser.logic.buildingobjects.buildingphysics.layer import Layer
# First layer south
layer_s1 = Layer(parent=roof_south, id=0)
layer_s1.thickness = 0.3
from teaser.logic.buildingobjects.buildingphysics.material import Material
material_s1 = Material(layer_s1)
material_s1.name = "Insulation"
material_s1.density = 120.0
material_s1.heat_capac = 0.04
material_s1.thermal_conduc = 1.0
# Second layer south
layer_s2 = Layer(parent=roof_south, id=1)
layer_s2.thickness = 0.15
material_s2 = Material(layer_s2)
material_s2.name = "Tile"
material_s2.density = 1400.0
material_s2.heat_capac = 0.6
material_s2.thermal_conduc = 2.5
# First layer north
layer_n1 = Layer(parent=roof_north, id=0)
layer_n1.thickness = 0.3
from teaser.logic.buildingobjects.buildingphysics.material import Material
material_n1 = Material(layer_n1)
material_n1.name = "Insulation"
material_n1.density = 120.0
material_n1.heat_capac = 0.04
material_n1.thermal_conduc = 1.0
# Second layer north
layer_n2 = Layer(parent=roof_north, id=1)
layer_n2.thickness = 0.15
material_n2 = Material(layer_n2)
material_n2.name = "Tile"
material_n2.density = 1400.0
material_n2.heat_capac = 0.6
material_n2.thermal_conduc = 2.5
# Another option is to use the database for typical wall constructions,
# but set area, tilt, orientation individually. To simplify code,
# we save individual information for exterior walls, interior walls into
# dictionaries.
# outer walls
# {'name_of_wall': [area, tilt, orientation]}
# interior walls
# {'name_of_wall': [area, tilt, orientation]}
from teaser.logic.buildingobjects.buildingphysics.outerwall import OuterWall
out_wall_dict = {"OuterWall_north": [10.0, 90.0, 0.0],
"OuterWall_east": [14.0, 90.0, 90.0],
"OuterWall_south": [10.0, 90.0, 180.0],
"OuterWall_west": [14.0, 90.0, 270.0]}
# For ground floors the orientation is always -2
ground_floor_dict = {"GroundFloor": [100.0, 0.0, -2]}
from teaser.logic.buildingobjects.buildingphysics.innerwall import InnerWall
in_wall_dict = {"InnerWall1": [10.0],
"InnerWall2": [14.0],
"InnerWall3": [10.0]}
for key, value in out_wall_dict.items():
# Instantiate class, key is the name
out_wall = OuterWall(parent=tz)
out_wall.name = key
# Use load_type_element() function of the building element, and pass
# over the year of construction of the building and the type of
# construction (in this case `heavy`).
out_wall.load_type_element(
year=bldg.year_of_construction,
construction='heavy')
# area, tilt and orientation need to be set individually.
out_wall.area = value[0]
out_wall.tilt = value[1]
out_wall.orientation = value[2]
# Repeat the procedure for inner walls and ground floors
for key, value in in_wall_dict.items():
in_wall = InnerWall(parent=tz)
in_wall.name = key
in_wall.load_type_element(
year=bldg.year_of_construction,
construction='heavy')
in_wall.area = value[0]
from teaser.logic.buildingobjects.buildingphysics.groundfloor import \
GroundFloor
for key, value in ground_floor_dict.items():
ground = GroundFloor(parent=tz)
ground.name = key
ground.load_type_element(
year=bldg.year_of_construction,
construction='heavy')
ground.area = value[0]
ground.tilt = value[1]
ground.orientation = value[2]
from teaser.logic.buildingobjects.buildingphysics.window import Window
win_dict = {"Window_east": [5.0, 90.0, 90.0],
"Window_south": [8.0, 90.0, 180.0],
"Window_west": [5.0, 90.0, 270.0]}
for key, value in win_dict.items():
win = Window(parent=tz)
win.name = key
win.area = value[0]
win.tilt = value[1]
win.orientation = value[2]
# Additional to the already known attributes the window has
# additional attributes. Window.g_value describes the solar gain
# through windows, a_conv the convective heat transmission due to
# absorption of the window on the inner side. shading_g_total and
# shading_max_irr refers to the shading (solar gain reduction of the
# shading and shading_max_irr the threshold of irradiance to
# automatically apply shading).
win.inner_convection = 1.7
win.inner_radiation = 5.0
win.outer_convection = 20.0
win.outer_radiation = 5.0
win.g_value = 0.789
win.a_conv = 0.03
win.shading_g_total = 0.0
win.shading_max_irr = 180.0
# One equivalent layer for windows
win_layer = Layer(parent=win)
win_layer.id = 1
win_layer.thickness = 0.024
# Material for glass
win_material = Material(win_layer)
win_material.name = "GlasWindow"
win_material.thermal_conduc = 0.067
win_material.transmittance = 0.9
def example_create_building():
'''
Instantiate a Project class (with load_data set to true), instantiate a
Building class, with the project as a parent. This automatically adds the
specific building and all its future changes to the project.
'''
prj = Project(load_data = True)
bldg = Building(parent = prj)
'''Set some building parameters'''
bldg.name = "SuperExampleBuilding"
bldg.street_name = "Awesome Avenue 42"
bldg.city = "46325 Fantastic Town"
bldg.year_of_construction = 1988
bldg.number_of_floors = 1
bldg.height_of_floors = 3.5
'''Instantiate a ThermalZone class, with building as parent and set some
parameters of the thermal zone'''
tz = ThermalZone(parent = bldg)
tz.name = "Living Room"
tz.area = 140.0
tz.volume = tz.area * bldg.number_of_floors * bldg.height_of_floors
tz.infiltration_rate = 0.5
'''Instantiate UseConditions18599 class with thermal zone as parent,
and load the use conditions for the usage 'Living' '''
tz.use_conditions = BoundaryConditions(parent = tz)
tz.use_conditions.load_use_conditions("Living")
'''We save information of the Outer and Inner walls as well as Windows
in dicts, the key is the name, while the value is a list (if applicable)
[year of construciton,
construction type,
area,
tilt,
orientation]'''
out_wall_dict = {"Outer Wall 1": [bldg.year_of_construction, 'heavy',
10.0, 90.0, 0.0],
"Outer Wall 2": [bldg.year_of_construction, 'heavy',
14.0, 90.0, 90.0],
"Outer Wall 3": [bldg.year_of_construction, 'heavy',
10.0, 90.0, 180.0],
"Outer Wall 4": [bldg.year_of_construction, 'heavy',
14.0, 90.0, 270.0]}
in_wall_dict = {"Inner Wall 1": [bldg.year_of_construction, 'light', 10.0],
"Inner Wall 2": [bldg.year_of_construction, 'heavy', 14.0],
"Inner Wall 3": [bldg.year_of_construction, 'light', 10.0]}
win_dict = {"Window 1": [bldg.year_of_construction,
5.0, 90.0, 90.0],
"Window 2": [bldg.year_of_construction,
8.0, 90.0, 180.0],
"Window 3": [bldg.year_of_construction,
5.0, 90.0, 270.0]}
for key, value in out_wall_dict.items():
'''instantiate OuterWall class'''
out_wall = OuterWall(parent = tz)
out_wall.name = key
'''load typical construction, based on year of construction and
construction type'''
out_wall.load_type_element(year = value[0],
construction = value[1])
out_wall.area = value[2]
out_wall.tilt = value[3]
out_wall.orientation = value[4]
for key, value in in_wall_dict.items():
'''instantiate InnerWall class'''
in_wall = InnerWall(parent = tz)
in_wall.name = key
'''load typical construction, based on year of construction and
construction type'''
in_wall.load_type_element(year = value[0],
construction = value[1])
in_wall.area = value[2]
for key, value in win_dict.items():
'''instantiate Window class'''
win = Window(parent = tz)
win.name = key
win.area = value[1]
win.tilt = value[2]
win.orientation = value[3]
'''
We know the exact properties of the window, thus we set them instead
of loading a typical construction
'''
win.inner_convection = 1.7
win.inner_radiation = 5.0
win.outer_convection = 20.0
win.outer_radiation = 5.0
win.g_value = 0.789
win.a_conv = 0.03
win.shading_g_total = 1.0
win.shading_max_irr = 180.0
'''Instantiate a Layer class, with window as parent, set attributes'''
win_layer = Layer(parent = win)
win_layer.id = 1
win_layer.thickness = 0.024
'''Instantiate a Material class, with window layer as parent,
set attributes'''
win_material = Material(win_layer)
win_material.name = "GlasWindow"
win_material.thermal_conduc = 0.067
win_material.transmittance = 0.9
'''Define a Rooftop and a Groundfloor, we don't need to set tilt and
orientation because we take the default values'''
roof = Rooftop(parent = tz)
roof.name = "Roof"
roof.load_type_element(bldg.year_of_construction, 'heavy')
roof.area = 140.0
ground = GroundFloor(parent = tz)
ground.name = "Ground floor"
ground.load_type_element(bldg.year_of_construction, 'heavy')
ground.area = 140.0
'''
We calculate the RC Values according to AixLib procedure
'''
prj.used_library_calc = 'AixLib'
prj.number_of_elements_calc = 2
prj.merge_windows_calc = False
prj.calc_all_buildings()
'''
Export the Modelica Record
'''
prj.export_aixlib(building_model="MultizoneEquipped",
zone_model="ThermalZoneEquipped",
corG=True,
internal_id=None,
path=None)
'''Or we use Annex60 method with for elements'''
#prj.calc_all_buildings(number_of_elements=4,
# merge_windows=False,
# used_library='Annex60')
#prj.export_annex()
'''
Save new TEASER XML
'''
prj.save_gml("ExampleProject")
prj.save_citygml("Easypeasy")
def from_scratch(
number_of_elements,
save=False,
path=utilities.get_default_path()):
"""This function creates the test room from scratch.
Notes: The standard defines an solar absorption coefficient for interior
surfaces of 0.6. We do not consider this, but we could by multiplying
the solar radiation after the window by 0.6.
Parameters
----------
number_of_elements: int
Number of elements of model
path: str (optional)
Path where Project should be stored as .teaserXML
save: bool (optional)
True if Project should be stored as .teaserXML at path
Returns
-------
prj: Project
Project that contains the building with the test room
"""
prj = Project(load_data=True)
prj.name = "ASHRAE140Verification"
bldg = Building(parent=prj)
bldg.name = "TestBuilding"
tz = ThermalZone(parent=bldg)
tz.name = "TestRoom900"
tz.area = 8.0 * 6.0
tz.volume = tz.area * 2.7
tz.infiltration_rate = 0.41
tz.use_conditions = BoundaryConditions(parent=tz)
roof = Rooftop(parent=tz)
roof.name = "Roof"
roof.area = 8.0 * 6.0
roof.orientation = -1.0
roof.tilt = 0.0
roof.inner_convection = 1
roof.outer_convection = 24.67
roof.inner_radiation = 5.13
roof.outer_radiation = 4.63
layer_r1 = Layer(parent=roof, id=0)
layer_r1.thickness = 0.01
material_r1 = Material(layer_r1)
material_r1.name = "Plasterboard"
material_r1.density = 950.0
material_r1.heat_capac = 840.0 / 1000
material_r1.thermal_conduc = 0.16
material_r1.ir_emissivity = 0.9
layer_r2 = Layer(parent=roof, id=1)
layer_r2.thickness = 0.1118
material_r2 = Material(layer_r2)
material_r2.name = "Fiberglass"
material_r2.density = 12
material_r2.heat_capac = 840 / 1000
material_r2.thermal_conduc = 0.04
layer_r3 = Layer(parent=roof, id=2)
layer_r3.thickness = 0.019
material_r3 = Material(layer_r3)
material_r3.name = "Roofdeck"
material_r3.density = 530
material_r3.heat_capac = 900 / 1000
material_r3.thermal_conduc = 0.14
material_r3.solar_absorp = 0.6
material_r3.ir_emissivity = 0.9
out_wall_north = OuterWall(parent=tz)
out_wall_north.name = "OuterWallNorth"
out_wall_north.area = 8.0 * 2.7
out_wall_north.orientation = 0.0
out_wall_north.tilt = 90.0
out_wall_north.inner_convection = 3.16
out_wall_north.outer_convection = 24.67
out_wall_north.inner_radiation = 5.13
out_wall_north.outer_radiation = 4.63
layer_own1 = Layer(parent=out_wall_north, id=0)
layer_own1.thickness = 0.1
material_own1 = Material(layer_own1)
material_own1.name = "Concrete"
material_own1.density = 1400.0
material_own1.heat_capac = 1000 / 1000
material_own1.thermal_conduc = 0.51
material_own1.ir_emissivity = 0.9
layer_own2 = Layer(parent=out_wall_north, id=1)
layer_own2.thickness = 0.062
material_own2 = Material(layer_own2)
material_own2.name = "FoamInsulation"
material_own2.density = 10
material_own2.heat_capac = 1400 / 1000
material_own2.thermal_conduc = 0.04
layer_own3 = Layer(parent=out_wall_north, id=2)
layer_own3.thickness = 0.009
material_own3 = Material(layer_own3)
material_own3.name = "WoodSiding"
material_own3.density = 530
material_own3.heat_capac = 900 / 1000
material_own3.thermal_conduc = 0.14
material_own3.solar_absorp = 0.6
material_own3.ir_emissivity = 0.9
out_wall_east = OuterWall(parent=tz)
out_wall_east.name = "OuterWallEast"
out_wall_east.area = 6.0 * 2.7
out_wall_east.orientation = 90.0
out_wall_east.tilt = 90.0
out_wall_east.inner_convection = 3.16
out_wall_east.outer_convection = 24.67
out_wall_east.inner_radiation = 5.13
out_wall_east.outer_radiation = 4.63
layer_owe1 = Layer(parent=out_wall_east, id=0)
layer_owe1.thickness = 0.1
material_owe1 = Material(layer_owe1)
material_owe1.name = "Concrete"
material_owe1.density = 1400.0
material_owe1.heat_capac = 1000 / 1000
material_owe1.thermal_conduc = 0.51
material_owe1.ir_emissivity = 0.9
layer_owe2 = Layer(parent=out_wall_east, id=1)
layer_owe2.thickness = 0.062
material_owe2 = Material(layer_owe2)
material_owe2.name = "FoamInsulation"
material_owe2.density = 10
material_owe2.heat_capac = 1400 / 1000
material_owe2.thermal_conduc = 0.04
layer_owe3 = Layer(parent=out_wall_east, id=2)
layer_owe3.thickness = 0.009
material_owe3 = Material(layer_owe3)
material_owe3.name = "WoodSiding"
material_owe3.density = 530
material_owe3.heat_capac = 900 / 1000
material_owe3.thermal_conduc = 0.14
material_owe3.solar_absorp = 0.6
material_owe3.ir_emissivity = 0.9
out_wall_south = OuterWall(parent=tz)
out_wall_south.name = "OuterWallSouth"
out_wall_south.area = (8.0 * 2.7) - 2 * (3 * 2) # minus two windows
out_wall_south.orientation = 180.0
out_wall_south.tilt = 90.0
out_wall_south.inner_convection = 3.16
out_wall_south.outer_convection = 24.67
out_wall_south.inner_radiation = 5.13
out_wall_south.outer_radiation = 4.63
layer_ows1 = Layer(parent=out_wall_south, id=0)
layer_ows1.thickness = 0.1
material_ows1 = Material(layer_ows1)
material_ows1.name = "Concrete"
material_ows1.density = 1400.0
material_ows1.heat_capac = 1000.0 / 1000
material_ows1.thermal_conduc = 0.51
material_ows1.ir_emissivity = 0.9
layer_ows2 = Layer(parent=out_wall_south, id=1)
layer_ows2.thickness = 0.062
material_ows2 = Material(layer_ows2)
material_ows2.name = "FoamInsulation"
material_ows2.density = 10
material_ows2.heat_capac = 1400 / 1000
material_ows2.thermal_conduc = 0.04
layer_ows3 = Layer(parent=out_wall_south, id=2)
layer_ows3.thickness = 0.009
material_ows3 = Material(layer_ows3)
material_ows3.name = "WoodSiding"
material_ows3.density = 530
material_ows3.heat_capac = 900 / 1000
material_ows3.thermal_conduc = 0.14
material_ows3.solar_absorp = 0.6
material_ows3.ir_emissivity = 0.9
out_wall_west = OuterWall(parent=tz)
out_wall_west.name = "OuterWallWest"
out_wall_west.area = 6 * 2.7
out_wall_west.orientation = 270.0
out_wall_west.tilt = 90.0
out_wall_west.inner_convection = 3.16
out_wall_west.outer_convection = 24.67
out_wall_west.inner_radiation = 5.13
out_wall_west.outer_radiation = 4.63
layer_oww1 = Layer(parent=out_wall_west, id=0)
layer_oww1.thickness = 0.1
material_oww1 = Material(layer_oww1)
material_oww1.name = "Concrete"
material_oww1.density = 1400.0
material_oww1.heat_capac = 1000.0 / 1000
material_oww1.thermal_conduc = 0.51
material_oww1.ir_emissivity = 0.9
layer_oww2 = Layer(parent=out_wall_west, id=1)
layer_oww2.thickness = 0.062
material_oww2 = Material(layer_oww2)
material_oww2.name = "FoamInsulation"
material_oww2.density = 10
material_oww2.heat_capac = 1400 / 1000
material_oww2.thermal_conduc = 0.04
layer_oww3 = Layer(parent=out_wall_west, id=2)
layer_oww3.thickness = 0.009
material_oww3 = Material(layer_oww3)
material_oww3.name = "WoodSiding"
material_oww3.density = 530
material_oww3.heat_capac = 900 / 1000
material_oww3.thermal_conduc = 0.14
material_oww3.solar_absorp = 0.6
material_oww3.ir_emissivity = 0.9
in_wall_floor = Floor(parent=tz)
in_wall_floor.name = "InnerWallFloor"
in_wall_floor.area = 6 * 8
in_wall_floor.orientation = -2.0
in_wall_floor.tilt = 0.0
in_wall_floor.inner_convection = 4.13
in_wall_floor.inner_radiation = 5.13
layer_iwf1 = Layer(parent=in_wall_floor, id=0)
layer_iwf1.thickness = 0.025
material_iwf1 = Material(layer_iwf1)
material_iwf1.name = "Concrete"
material_iwf1.density = 1400
material_iwf1.heat_capac = 1000 / 1000
material_iwf1.thermal_conduc = 1.13
material_iwf1.ir_emissivity = 0.9
layer_iwf2 = Layer(parent=in_wall_floor, id=1)
layer_iwf2.thickness = 1.007
material_iwf2 = Material(layer_iwf2)
material_iwf2.name = "Insulation"
material_iwf2.density = 0.000000000001 # 0.0001, as small as possible
material_iwf2.heat_capac = 0.000000000001 # 0.0001, as small as possible
material_iwf2.thermal_conduc = 0.04
win_1 = Window(parent=tz)
win_1.name = "WindowSouthLeft"
win_1.area = 3 * 2
win_1.tilt = 90.0
win_1.orientation = 180.0
win_1.inner_convection = 3.16
win_1.inner_radiation = 5.13
win_1.outer_convection = 16.37
win_1.outer_radiation = 4.63
win_1.g_value = 0.789
win_1.a_conv = 0.03 # for the given U-value extracted from VDI 6007-2/-3
win_1_layer = Layer(parent=win_1)
win_1_layer.id = 1
win_1_layer.thickness = 0.024
win_1_material = Material(win_1_layer)
win_1_material.name = "GlasWindow"
win_1_material.thermal_conduc = 0.15
win_1_material.transmittance = 0.907
win_1_material.ir_emissivity = 0.9
win_2 = Window(parent=tz)
win_2.name = "WindowSouthRight"
win_2.area = 3 * 2
win_2.tilt = 90.0
win_2.orientation = 180.0
win_2.inner_convection = 3.16
win_2.inner_radiation = 5.13
win_2.outer_convection = 16.37
win_2.outer_radiation = 4.63
win_2.g_value = 0.789
win_2.a_conv = 0.03 # for the given U-value extracted from VDI 6007-2/-3
win_2_layer = Layer(parent=win_2)
win_2_layer.id = 1
win_2_layer.thickness = 0.024
win_2_material = Material(win_2_layer)
win_2_material.name = "GlasWindow"
win_2_material.thermal_conduc = 0.15
win_2_material.transmittance = 0.907
win_2_material.ir_emissivity = 0.9
# This is a dummy ground floor to export three and four elements models.
# Please set values for floor plate in three element and four element
# models to default.
if number_of_elements >= 3:
out_wall_gf = GroundFloor(parent=tz)
out_wall_gf.name = "ExtWallGroundFloor"
out_wall_gf.area = 6 * 8
out_wall_gf.orientation = -2.0
out_wall_gf.tilt = 0.0
out_wall_gf.inner_convection = 4.13
out_wall_gf.inner_radiation = 5.13
layer_ofgw1 = Layer(parent=out_wall_gf, id=0)
layer_ofgw1.thickness = 1.003
material_ofgw1 = Material(layer_ofgw1)
material_ofgw1.name = "Insulation"
material_ofgw1.density = 0.0001 # as small as possible
material_ofgw1.heat_capac = 0.0001 # as small as possible
material_ofgw1.thermal_conduc = 0.04
if save:
prj.save_project(file_name='ASHRAE140_900', path=path)
return prj
def _load_building(prj, pyxb_bld, type):
if type == "Building":
bldg = Building(prj)
elif type == "Office":
bldg = Office(prj)
elif type == "Institute":
bldg = Institute(prj)
elif type == "Institute4":
bldg = Institute4(prj)
elif type == "Institute8":
bldg = Institute8(prj)
elif type == "Residential":
bldg = SingleFamilyDwelling(prj)
bldg.name = pyxb_bld.name
bldg.street_name = pyxb_bld.street_name
bldg.city = pyxb_bld.city
bldg.type_of_building = pyxb_bld.type_of_building
bldg.year_of_construction = pyxb_bld.year_of_construction
bldg.year_of_retrofit = pyxb_bld.year_of_retrofit
bldg.number_of_floors = pyxb_bld.number_of_floors
bldg.height_of_floors = pyxb_bld.height_of_floors
if not pyxb_bld.ThermalZone:
bldg.net_leased_area = pyxb_bld.net_leased_area
if pyxb_bld.CentralAHU:
pyxb_ahu = pyxb_bld.CentralAHU
bldg.central_ahu = BuildingAHU(bldg)
bldg.central_ahu.heating = pyxb_ahu.heating
bldg.central_ahu.cooling = pyxb_ahu.cooling
bldg.central_ahu.dehumidification = pyxb_ahu.dehumidification
bldg.central_ahu.humidification = pyxb_ahu.humidification
bldg.central_ahu.heat_recovery = pyxb_ahu.heat_recovery
bldg.central_ahu.by_pass_dehumidification = \
pyxb_ahu.by_pass_dehumidification
bldg.central_ahu.efficiency_recovery =pyxb_ahu.efficiency_recovery
bldg.central_ahu.efficiency_revocery_false = \
pyxb_ahu.efficiency_revocery_false
bldg.central_ahu.profile_min_relative_humidity = \
pyxb_ahu.profile_min_relative_humidity
bldg.central_ahu.profile_max_relative_humidity = \
pyxb_ahu.profile_max_relative_humidity
bldg.central_ahu.profile_v_flow = \
pyxb_ahu.profile_v_flow
bldg.central_ahu.profile_temperature = \
pyxb_ahu.profile_temperature
for pyxb_zone in pyxb_bld.ThermalZone:
zone = ThermalZone(bldg)
zone.name = pyxb_zone.name
zone.area = pyxb_zone.area
zone.volume = pyxb_zone.volume
zone.infiltration_rate = pyxb_zone.infiltration_rate
# zone.use_conditions.typical_length = pyxb_zone.typical_length
# zone.use_conditions.typical_width = pyxb_zone.typical_width
zone.use_conditions = BoundaryConditions(zone)
pyxb_use = pyxb_zone.UseCondition.BoundaryConditions
zone.use_conditions.usage = \
pyxb_use.usage
zone.use_conditions.usage_time = \
pyxb_use.UsageOperationTime.usage_time
zone.use_conditions.daily_usage_hours = \
pyxb_use.UsageOperationTime.daily_usage_hours
zone.use_conditions.yearly_usage_days = \
pyxb_use.UsageOperationTime.yearly_usage_days
zone.use_conditions.yearly_usage_hours_day = \
pyxb_use.UsageOperationTime.yearly_usage_hours_day
zone.use_conditions.yearly_usage_hours_night = \
pyxb_use.UsageOperationTime.yearly_usage_hours_night
zone.use_conditions.daily_operation_ahu_cooling = \
pyxb_use.UsageOperationTime.daily_operation_ahu_cooling
zone.use_conditions.yearly_heating_days = \
pyxb_use.UsageOperationTime.yearly_heating_days
zone.use_conditions.yearly_ahu_days = \
pyxb_use.UsageOperationTime.yearly_ahu_days
zone.use_conditions.yearly_cooling_days = \
pyxb_use.UsageOperationTime.yearly_cooling_days
zone.use_conditions.daily_operation_heating = \
pyxb_use.UsageOperationTime.daily_operation_heating
zone.use_conditions.maintained_illuminace = \
pyxb_use.Lighting.maintained_illuminace
zone.use_conditions.usage_level_height = \
pyxb_use.Lighting.usage_level_height
zone.use_conditions.red_factor_visual = \
pyxb_use.Lighting.red_factor_visual
zone.use_conditions.rel_absence = \
pyxb_use.Lighting.rel_absence
zone.use_conditions.room_index = \
pyxb_use.Lighting.room_index
zone.use_conditions.part_load_factor_lighting = \
pyxb_use.Lighting.part_load_factor_lighting
zone.use_conditions.ratio_conv_rad_lighting = \
pyxb_use.Lighting.ratio_conv_rad_lighting
zone.use_conditions.set_temp_heat = \
pyxb_use.RoomClimate.set_temp_heat
zone.use_conditions.set_temp_cool = \
pyxb_use.RoomClimate.set_temp_cool
zone.use_conditions.temp_set_back = \
pyxb_use.RoomClimate.temp_set_back
zone.use_conditions.min_temp_heat = \
pyxb_use.RoomClimate.min_temp_heat
zone.use_conditions.max_temp_cool = \
pyxb_use.RoomClimate.max_temp_cool
zone.use_conditions.rel_humidity = \
pyxb_use.RoomClimate.rel_humidity
zone.use_conditions.cooling_time = \
pyxb_use.RoomClimate.cooling_time
zone.use_conditions.heating_time = \
pyxb_use.RoomClimate.heating_time
zone.use_conditions.min_air_exchange = \
pyxb_use.RoomClimate.min_air_exchange
zone.use_conditions.rel_absence_ahu = \
pyxb_use.RoomClimate.rel_absence_ahu
zone.use_conditions.part_load_factor_ahu = \
pyxb_use.RoomClimate.part_load_factor_ahu
zone.use_conditions.persons = \
pyxb_use.InternalGains.persons
zone.use_conditions.profile_persons = \
pyxb_use.InternalGains.profile_persons
zone.use_conditions.machines = \
pyxb_use.InternalGains.machines
zone.use_conditions.profile_machines = \
pyxb_use.InternalGains.profile_machines
zone.use_conditions.lighting_power = \
pyxb_use.InternalGains.lighting_power
zone.use_conditions.profile_lighting = \
pyxb_use.InternalGains.profile_lighting
zone.use_conditions.min_ahu = \
pyxb_use.AHU.min_ahu
zone.use_conditions.max_ahu = \
pyxb_use.AHU.max_ahu
zone.use_conditions.with_ahu = \
pyxb_use.AHU.with_ahu
zone.use_constant_ach_rate = \
pyxb_use.AHU.use_constant_ach_rate
zone.base_ach = \
pyxb_use.AHU.base_ach
zone.max_user_ach = \
pyxb_use.AHU.max_user_ach
zone.max_overheating_ach = \
pyxb_use.AHU.max_overheating_ach
zone.max_summer_ach = \
pyxb_use.AHU.max_summer_ach
zone.winter_reduction = \
pyxb_use.AHU.winter_reduction
for pyxb_wall in pyxb_zone.OuterWall:
out_wall = OuterWall(zone)
set_basic_data_teaser(pyxb_wall, out_wall)
set_layer_data_teaser(pyxb_wall, out_wall)
# zone.outer_walls.append(out_wall)
for pyxb_wall in pyxb_zone.Rooftop:
roof = Rooftop(zone)
set_basic_data_teaser(pyxb_wall, roof)
set_layer_data_teaser(pyxb_wall, roof)
# zone.outer_walls.append(roof)
for pyxb_wall in pyxb_zone.GroundFloor:
gr_floor = GroundFloor(zone)
set_basic_data_teaser(pyxb_wall, gr_floor)
set_layer_data_teaser(pyxb_wall, gr_floor)
# zone.outer_walls.append(gr_floor)
for pyxb_wall in pyxb_zone.InnerWall:
in_wall = InnerWall(zone)
set_basic_data_teaser(pyxb_wall, in_wall)
set_layer_data_teaser(pyxb_wall, in_wall)
# zone.inner_walls.append(in_wall)
for pyxb_wall in pyxb_zone.Ceiling:
ceiling = Ceiling(zone)
set_basic_data_teaser(pyxb_wall, ceiling)
set_layer_data_teaser(pyxb_wall, ceiling)
# zone.inner_walls.append(ceiling)
for pyxb_wall in pyxb_zone.Floor:
floor = Floor(zone)
set_basic_data_teaser(pyxb_wall, floor)
set_layer_data_teaser(pyxb_wall, floor)
# zone.inner_walls.append(floor)
for pyxb_win in pyxb_zone.Window:
win = Window(zone)
set_basic_data_teaser(pyxb_win, win)
set_layer_data_teaser(pyxb_win, win)
def load_gml(path, prj):
"""This function loads buildings from a CityGML file
This function is a proof of concept, be careful using it.
Parameters
----------
path: string
path of CityGML file
prj: Project()
Teaser instance of Project()
"""
xml_file = open(path, 'r')
gml_bind = citygml.CreateFromDocument(xml_file.read())
for i, city_object in enumerate(gml_bind.featureMember):
if city_object.Feature.consistsOfBuildingPart:
for part in city_object.Feature.consistsOfBuildingPart:
if part.BuildingPart.function:
if part.BuildingPart.function[0].value() == "1000":
bld = SingleFamilyDwelling(parent=prj,
name=part.BuildingPart.id)
elif part.BuildingPart.function[0].value() == "1120":
bld = Office(parent=prj, name=part.BuildingPart.id)
else:
bld = Building(parent=prj, name=part.BuildingPart.id)
else:
bld = Building(parent=prj, name=part.BuildingPart.id)
_create_building_part(bld=bld, part=part)
_set_attributes(bld=bld, gml_bld=part.BuildingPart)
bld.set_height_gml()
else:
if city_object.Feature.function:
if city_object.Feature.function[0].value() == "1000":
bld = SingleFamilyDwelling(parent=prj,
name=city_object.Feature.id)
elif city_object.Feature.function[0].value() == "1120":
bld = Office(parent=prj, name=city_object.Feature.id)
else:
bld = Building(parent=prj, name=city_object.Feature.id)
else:
bld = Building(parent=prj, name=city_object.Feature.id)
_create_building(bld=bld, city_object=city_object)
_set_attributes(bld=bld, gml_bld=city_object.Feature)
bld.set_height_gml()
try:
bld.set_gml_attributes()
except UserWarning:
print("bld.set_gml_attributes() did not work")
pass
try:
bld.generate_from_gml()
except (UserWarning, AttributeError):
print("bld.generate_from_gml() did not work for building ",
str(bld.name))
pass