def __init__(self, driver): self.driver = driver self.dataFile = dataFileName() self.cmf = commonFun(self.driver) self.initDriver = initDriver() self.loginElem = loginPage(self.driver) self.roleElem = Role(self.driver) self.userElem = UserPage(self.driver) self.frameElem = frameElement(self.driver) self.authElem = AuthMethodPage(self.driver) self.dptment = Department(self.driver) self.resource = Resource(self.driver) self.account = Accountmgr(self.driver) self.windowsElem = WindowsResource(self.driver) self.databaseElem = DatabaseResource(self.driver) self.usergroup = Usergroup(self.driver) self.regroup = Regroup(self.driver) self.appElem = AppPage(self.driver) self.authorizationElem = AuthorizationPage(self.driver) self.testAutho = testAuthorization(self.driver) self.clientElem = ClientPage(self.driver) self.command = CommandRule(self.driver) self.ntp = NtpService(self.driver) self.mail = MailPage(self.driver) self.syslog = Syslog(driver) self.ssoElem = SsoPage(self.driver) self.alarm = AlarmPage(self.driver) self.PwdStr = PwdStrategy(self.driver) self.passwdenvelope = EnvelopePage(self.driver)
def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.command = CommandRule(driver) self.sso = testSso(driver) self.comsuit = CommonSuiteData(driver)
def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cnEn = cnEncode() self.acproval = Accapproval(driver) self.command = CommandRule(driver) self.log = log()
def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.getElem = getElement(driver) self.loginElem = loginPage(self.driver)
def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.retime = RetimeRule(driver)
def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cmf = commonFun(driver) self.cnEn = cnEncode() self.comsuit = CommonSuiteData(self.driver) self.command = CommandRule(self.driver) self.tableElem = tableElement(driver) self.log = log() self.userElem = UserPage(self.driver)
def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cnEn = cnEncode() self.acproval = Accapproval(driver) self.command = CommandRule(driver) self.log = log()
def __init__(self,driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.sso = testSso(driver) self.comsuit = CommonSuiteData(driver)
def __init__(self,driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.getElem = getElement(driver) self.loginElem = loginPage(self.driver)
def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cmf = commonFun(driver) self.cnEn = cnEncode() self.comsuit = CommonSuiteData(self.driver) self.command = CommandRule(self.driver) self.tableElem = tableElement(driver) self.log = log() self.userElem = UserPage(self.driver) self.role = Role(driver)
class testRetime(object): def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.retime = RetimeRule(driver) u'''获取测试数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): dataFile = dataFileName() retrulePath = dataFile.get_retime_test_data_url() retruleData = dataFile.get_data(retrulePath, sheetname) return retruleData u'''添加资源时间规则''' def add_retime_rule_001(self): #日志开始记录 self.log.log_start("add_retime_rule") #获取添加资源时间规则测试数据 retruleData = self.get_table_data("add_retime_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(retruleData)): data = retruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_add_button() if dataRow == 3: self.retime.click_running_state() self.timerule.start_date(data[2]) self.timerule.date_of_termination(data[4], data[5]) self.retime.set_month_start_time(data[6]) self.retime.set_month_end_time(data[7]) self.retime.set_week_start_time(data[8]) self.retime.set_week_end_time(data[9]) self.retime.set_day_start_time(data[10]) self.retime.set_day_end_time(data[11]) self.retime.select_action(data[12]) self.command.click_add_users_button() self.command.check_all_user() self.command.click_add_resource_button() self.retime.check_resource(data[13]) self.retime.click_save_retime() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print("add_retime_rule fail:" + str(e)) self.log.log_end("add_retime_rule") u'''编辑资源时间规则''' def mod_retime_rule_002(self): #日志开始记录 self.log.log_start("mod_retime_rule") #获取编辑资源时间规则测试数据 retruleData = self.get_table_data("mod_retime_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(retruleData)): data = retruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.retime.click_option_method(data[2], data[3]) self.retime.select_action(data[4]) self.retime.click_save_retime() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print("mod_retime_rule fail:" + str(e)) self.log.log_end("mod_retime_rule") u'''资源时间规则结果''' def add_retime_rule_result_003(self): self.frameElem.from_frame_to_otherFrame("topFrame") self.cmf.select_role_by_text(u"运维操作员") #日志开始记录 self.log.log_start("add_retime_rule_result") #获取资源时间审批测试数据 retruleData = self.get_table_data("add_retime_rule_result") for dataRow in range(len(retruleData)): data = retruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.retime.check_resource_time_rule(data) except Exception as e: print("add_retime_rule_result fail:" + str(e)) self.log.log_end("add_retime_rule_result") u'''操作资源时间规则''' def option_retime_rule_004(self): self.comsuit.sys_switch_to_dep() self.comsuit.switch_to_moudle(u"运维管理", u"规则定义") self.command.click_left_rule(3) #日志开始记录 self.log.log_start("option_retime_rule") #获取操作资源时间规则测试数据 retruleData = self.get_table_data("option_retime_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(retruleData)): data = retruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if dataRow == 1: self.retime.click_bulkdel_retime() elif dataRow == 2 or dataRow == 3: self.retime.click_option_method(data[2], data[3]) elif dataRow == 4 or dataRow == 5: time.sleep(5) self.retime.click_option_method(data[2], data[3]) self.command.set_row_command(data[4]) self.command.check_sure_button() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) time.sleep(3) self.command.click_cancel_button() continue self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print("option_retime_rule fail:" + str(e)) self.log.log_end("option_retime_rule") u'''校验资源时间规则''' def check_retime_rule_005(self): #日志开始记录 self.log.log_start("check_retime_rule") #获取校验资源时间规则测试数据 retruleData = self.get_table_data("check_retime_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() self.command.click_add_button() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(retruleData)): data = retruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if 2 <= dataRow <= 4: if dataRow != 4: self.timerule.start_date(data[2], data[3]) else: self.timerule.start_date(data[2]) if dataRow != 2: self.timerule.date_of_termination(data[4], data[5]) elif 5 <= dataRow <= 11: if dataRow == 5: self.timerule.date_of_termination(data[4], data[5]) self.retime.set_month_start_time(data[6]) self.retime.set_month_end_time(data[7]) if dataRow == 11: self.retime.set_day_start_time(data[8]) elif 12 <= dataRow <= 17: self.retime.set_day_start_time(data[8]) self.retime.set_day_end_time(data[9]) elif dataRow == 18: self.command.click_add_users_button() self.command.check_all_user() self.retime.click_save_retime() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print("check_retime_rule fail:" + str(e)) self.command.click_back_command() self.log.log_end("check_retime_rule") u'''删除资源时间规则''' def del_retime_rule_006(self): #日志开始记录 self.log.log_start("del_retime_rule") #获取删除资源时间规则测试数据 retruleData = self.get_table_data("del_retime_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(retruleData)): data = retruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.retime.click_option_method(data[2], data[3]) self.retime.click_bulkdel_retime() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.cmf.click_login_msg_button() except Exception as e: print("del_retime_rule fail:" + str(e)) self.log.log_end("del_retime_rule")
class Backuprestore(object): def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cmf = commonFun(driver) self.cnEn = cnEncode() self.comsuit = CommonSuiteData(self.driver) self.command = CommandRule(self.driver) self.tableElem = tableElement(driver) self.log = log() self.userElem = UserPage(self.driver) u'''点击自动备份开关''' def auto_backup_switch(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "btn_qh") u'''勾选系统配置''' def check_sys_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") values = self.check_common() if values[0] == None: self.getElem.find_element_wait_and_click_EC("id", "configBackUp") if values[1] != None: self.getElem.find_element_wait_and_click_EC("id", "databaseBackUp") u'''勾选实体配置''' def check_entity_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") values = self.check_common() if values[0] != None: self.getElem.find_element_wait_and_click_EC("id", "configBackUp") if values[1] == None: self.getElem.find_element_wait_and_click_EC("id", "databaseBackUp") u'''勾选实体配置和系统配置''' def check_all_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") values = self.check_common() if values[0] == None: self.getElem.find_element_wait_and_click_EC("id", "configBackUp") if values[1] == None: self.getElem.find_element_wait_and_click_EC("id", "databaseBackUp") u'''勾选实体或者系统配置公共方法''' def check_common(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "configBackUp") value = selem.get_attribute('checked') selemdb = self.getElem.find_element_with_wait_EC("id", "databaseBackUp") valuedb = selemdb.get_attribute('checked') list = [value, valuedb] return list u'''勾选实体或者系统配置 parameter: - stauts:勾选配置信息1代表系统配置2代表实体配置,3代表系统配置和实体配置 ''' def check_config(self, stauts): staut = self.cnEn.is_float(stauts) if staut == '1': self.check_sys_config() elif staut == '2': self.check_entity_config() else: self.check_all_config() u'''选择备份方式 parameter: - stauts:value属性值,1代表一次性执行,2代表周期性执行 ''' def select_backup_mode(self, stauts): staut = self.cnEn.is_float(stauts) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "backUpType") self.selectElem.select_element_by_value(selem, staut) u'''选择执行小时 parameter: - stauts:value属性值 ''' def select_hour(self, stauts): staut = self.cnEn.is_float(stauts) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "startHour") self.selectElem.select_element_by_value(selem, staut) u'''填写分钟 parameter: - minute:分钟 ''' def set_minute(self, minute): minu = self.cnEn.is_float(minute) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "startMinute") self.getElem.find_element_wait_and_sendkeys("id", "startMinute", minu) u'''选择执行方式 parameter: - staut:0代表按天,1代表按周,2代表按月,3代表按年 ''' def select_execu_mode(self, staut): self.frameElem.from_frame_to_otherFrame("rigthFrame") if staut == 0: self.getElem.find_element_wait_and_click_EC("id", "dayradio") elif staut == 1: self.getElem.find_element_wait_and_click_EC("id", "weekradio") elif staut == 2: self.getElem.find_element_wait_and_click_EC("id", "monthRadio") else: self.getElem.find_element_wait_and_click_EC("id", "yearRadio") u'''选择存储位置 parameter: - stauts:value属性值1代表本地备份2代表ftp备份 ''' def select_storage_location(self, stauts): staut = self.cnEn.is_float(stauts) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "backUpLocation") self.selectElem.select_element_by_value(selem, staut) u'''填写远程路径 parameter: - path:远程路径 ''' def set_remote_path(self, path): pat = self.cnEn.is_float(path) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "path") self.getElem.find_element_wait_and_sendkeys("id", "path", pat) u'''填写服务器IP parameter: - ip:服务器IP ''' def set_ftpip(self, ip): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "ip") self.getElem.find_element_wait_and_sendkeys("id", "ip", ip) u'''填写连接用户名 parameter: - minute:连接用户名 ''' def set_name(self, name): nam = self.cnEn.is_float(name) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "username") self.getElem.find_element_wait_and_sendkeys("id", "username", nam) u'''填写连接口令 parameter: - password:连接口令 ''' def set_password(self, password): pwd = self.cnEn.is_float(password) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "password") self.getElem.find_element_wait_and_sendkeys("id", "password", pwd) u'''填写确认口令 parameter: - minute:分钟 ''' def set_password_again(self, password): pwd = self.cnEn.is_float(password) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "passwordAgain") self.getElem.find_element_wait_and_sendkeys("id", "passwordAgain", pwd) u'''点击立刻备份''' def click_backup_immediately(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "back_up_now") u'''点击保存''' def click_save(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "back_up_save") u'''选择系统备份还原或者查看备份文件 parameter: - staut:0代表系统备份还原,1代表查看备份文件 ''' def select_backup_menu(self, staut): self.frameElem.from_frame_to_otherFrame("rigthFrame") if staut == 0: self.getElem.find_element_wait_and_click_EC("id", "tit1") elif staut == 1: self.getElem.find_element_wait_and_click_EC("id", "tit2") u'''点击操作列操作 Parameters: - filename:文件名称 - value:1代表下载,2代表删除,3代表还原 ''' def click_operat_file(self,filename, value): self.frameElem.from_frame_to_otherFrame("rigthFrame") row = 1 selems = self.driver.find_elements_by_name("file") for selem in selems: idvalue = selem.get_attribute('id') row = row +1 if idvalue == filename: xpath = ".//*[@id='content_rt02']/div/table/tbody/tr[" + str(row) + "]/td[7]/input[" + str(value) + "]" self.getElem.find_element_wait_and_click_EC("xpath", xpath) time.sleep(1) u'''下载上传完成后点击操作列操作 Parameters: - filename:文件名称 - value:1代表下载,2代表删除,3代表还原 ''' def upload_click_operat_file(self,filename, value): self.frameElem.from_frame_to_otherFrame("rigthFrame") row = 1 filenames = ""+filename[:-6] + ""+filename+"" selems = self.driver.find_elements_by_name("file") for selem in selems: idvalue = selem.get_attribute('id') row = row +1 if idvalue == filename or idvalue == filenames: xpath = ".//*[@id='content_rt02']/div/table/tbody/tr[" + str(row) + "]/td[7]/input[" + str(value) + "]" self.getElem.find_element_wait_and_click_EC("xpath", xpath) time.sleep(1) u'''点击还原系统配置''' def click_restore_sys_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "deleConfig1") u'''点击清空数据库''' def click_reset_database(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "resetDataBase1") u'''点击清空数据库''' def click_reset_audit(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "delAuditFile1") u'''填写syslogip parameter: - syslogip:syslogip ''' def set_syslogip(self, syslogip): ip = self.cnEn.is_float(syslogip) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "host") self.getElem.find_element_wait_and_sendkeys("id", "host", ip) u'''填写syslog端口 parameter: - port:syslog端口 ''' def set_port(self, port): sysport = self.cnEn.is_float(port) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "port") self.getElem.find_element_wait_and_sendkeys("id", "port", sysport) u'''点击syslog保存''' def click_syslog_save(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "save_syslog") u'''获取syslogip值''' def get_syslog_port(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "port") value = selem.get_attribute("value") return value u'''获取文件名称''' def get_file_name(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("xpath", ".//*[@id='content_rt02']/div/table/tbody/tr[2]") value = selem.get_attribute('id') return value u'''编辑syslog parameter: - ip:syslogip - port:端口 ''' def set_syslog(self, port, ip='no'): time.sleep(3) self.comsuit.switch_to_moudle(u'系统配置', u'关联服务') self.command.click_left_rule(1) if ip != 'no': self.set_syslogip(ip) self.set_port(port) self.click_syslog_save() self.frameElem.switch_to_content() self.cmf.click_msg_button(1) u'''检验syslog端口是否为备份之前信息 parameter: - port:端口 - checklog:检验信息 ''' def check_syslog_content(self, port, checklog): self.comsuit.switch_to_moudle(u'系统配置', u'关联服务') self.command.click_left_rule(1) elemText = self.get_syslog_port() strdata3 = self.cnEn.is_float(port) if elemText == strdata3: self.log.log_detail(checklog, True) else: self.log.log_detail(checklog, False) u'''校验用户或者角色信息 Parameters: - namevalue:传入的要被查询名称 - name:表格列的name属性 - checklog:日志信息 return:定位该名称位于第几行 ''' def check_content(self,namevalue, name, checklog): row = self.cmf.find_row_by_name(namevalue, name) if row != 0: self.log.log_detail(checklog, True) else: self.log.log_detail(checklog, False) u'''填写用户信息 parameters: account : 用户账号 name : 用户名称 pwd : 用户密码 agpwd : 确认密码 ''' def set_user_info(self, account, name, pwd, agpwd): self.comsuit.switch_to_moudle(u"运维管理", u"用户") self.frameElem.from_frame_to_otherFrame("mainFrame") self.userElem.add_button() self.userElem.set_user_account(account) self.userElem.set_user_name(name) self.userElem.set_user_pwd(pwd) self.userElem.set_user_enquire_pwd(agpwd) self.userElem.save_button() self.frameElem.switch_to_content() self.cmf.click_login_msg_button() u'''点击用户操作列对应的删除按钮 parameters: - account : 用户账号 ''' def del_user_info(self, account): self.comsuit.switch_to_moudle(u"运维管理", u"用户") self.frameElem.from_frame_to_otherFrame("mainFrame") self.userElem.operate_delete(account) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) u'''点击备份还原配置文件的删除 parameters: - filename : 文件名称 - loginfo : 日志信息 ''' def del_backup_file(self, filename, loginfo): self.click_operat_file(filename, 2) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) time.sleep(1) self.log.log_detail(loginfo, True) u'''执行还原操作 parameters: - filename :执行还原的文件名称 - loginfo :日志信息 - stauts :状态1代表执行操作列按钮2代表进行上传后操作列按钮 ''' def execute_restore(self, filename, loginfo, stauts=1): self.comsuit.switch_to_moudle(u'系统配置', u'备份还原') self.command.click_left_rule(0) self.select_backup_menu(1) if stauts == 1: self.click_operat_file(filename, 3) elif stauts == 2: self.upload_click_operat_file(filename, 3) time.sleep(8) self.frameElem.switch_to_content() self.getElem.find_element_with_wait_EC("classname", "aui_state_highlight") time.sleep(5) self.cmf.click_msg_button(1) self.log.log_detail(loginfo, True) u'''配置备份信息 parameters: - data :数据文件集 - backMsg :保存成功的弹出框信息 - flag :无检查点的测试项标识,如果为True说明通过 ''' def config_backup(self, data, backMsg, flag): self.comsuit.switch_to_moudle(u'系统配置', u'备份还原') self.command.click_left_rule(0) self.check_config(data[12]) self.select_backup_mode(data[4]) self.backup_time(data[5], data[6]) self.select_storage_location(data[7]) self.click_save() time.sleep(3) self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", backMsg, data, flag) self.click_backup_immediately() time.sleep(2) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.log.log_detail(data[9], True) self.select_backup_menu(1) u'''执行日期 Parameters: - type :t代表今天,c代表clear,q代表确定,默认选择今天 - backuptime :执行日期设定的日期,格式为2016-9-7 11:42:42 ''' def backup_time(self, types, backuptime): self.frameElem.from_frame_to_otherFrame("rigthFrame") # 时间控件的fram的xpath fxpath = "//iframe[@hidefocus='true']" # 日期控件table的xpath路径 txpath = "/html/body/div/div[3]/table" status = self.cnEn.is_float('1') type = self.cnEn.is_float(types) # 转成datetime对象 date = datetime(*xldate_as_tuple(backuptime, 0)) end = date.strftime('%Y-%m-%d %H:%M:%S') self.option_time("backUpTime", fxpath, status, type, txpath, end) u'''操作时间控件 Parameters: - wdateId:日期控件input控件的ID值 - fxpath:日期控件frame的xpath路径 - status: 日期控件是否有时分秒 - txpath:日期控件table的xpath路径 - time:设定的日期,格式为2016-9-7 11:42:42 - type:t代表今天,c代表clear,q代表确定,默认选择今天 ''' def option_time(self,wdateId,fxpath,status='0',type='t',txpath = None,dtime = None): self.getElem.find_element_wait_and_click("id",wdateId) frame = self.driver.find_element_by_xpath(fxpath) self.driver.switch_to_frame(frame) if type == 't': self.getElem.find_element_wait_and_click("id","dpTodayInput") elif type == 'c': self.getElem.find_element_wait_and_click("id","dpClearInput") elif type == 'q': if dtime is not None: list = dtime.split() ymdList = list[0].split("-") hmsList = list[1].split(":") #年 tYear = ymdList[0] #月 tMon = ymdList[1] #日 tDay = ymdList[2] #时 tHour = hmsList[0] #分 tMin = hmsList[1] #秒 tSen = hmsList[2] dTitle = self.getElem.find_element_with_wait("id","dpTitle").find_elements_by_tag_name("input") #设定月 dTitle[0].clear() dTitle[0].send_keys(tMon) #设定年 dTitle[1].clear() dTitle[1].send_keys(tYear) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "backUpTime") self.driver.switch_to_frame(frame) if txpath is not None: iStatus = False for itr in range(7): if itr != 0: for itd in range(7): ct = self.tableElem.get_table_cell_text(txpath,itr,itd)[0] #排除第一行大于7的 if itr == 1 and int(ct) > 7: continue #排除倒数第二行小于15的 if itr == 5 and int(ct) < 15: continue #排除最后一行小于15的 if itr == 6 and int(ct) < 15: continue #如果跟给定的日期一致,点击日期 if int(ct) == int(tDay): self.tableElem.get_table_cell_text(txpath,itr,itd)[1].click() iStatus = True break #找到日期后跳出循环 if iStatus: break #日期控件是否有时分秒 if status == '1': dTime = self.getElem.find_element_with_wait("id","dpTime").find_elements_by_tag_name("input") #设定小时 dTime[0].clear() dTime[0].send_keys(tHour) #设定分钟 dTime[2].clear() dTime[2].send_keys(tMin) #设定秒 dTime[4].clear() dTime[4].send_keys(tSen) self.getElem.find_element_wait_and_click("id","dpOkInput") u'''上传操作 parameters: - filename :执行还原的文件名称 - loginfo :日志信息 ''' def backup_file_upload(self, filename, loginfo): self.frameElem.from_frame_to_otherFrame("rigthFrame") value = "C:\Users\Administrator\Downloads\\" + filename+"" self.getElem.find_element_wait_and_sendkeys("id", "backUpFile", value) time.sleep(2) self.getElem.find_element_wait_and_click_EC("id", "up_file") self.frameElem.switch_to_content() self.cmf.click_msg_button(1) time.sleep(1) self.log.log_detail(loginfo, True)
class testCommand(object): def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.sso = testSso(driver) self.comsuit = CommonSuiteData(driver) u'''获取测试数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): dataFile = dataFileName() comrulPath = dataFile.get_command_test_data_url() comrulData = dataFile.get_data(comrulPath, sheetname) return comrulData u'''添加命令规则''' def add_command_rule_001(self): #日志开始记录 self.log.log_start("add_command_rule") #获取添加命令规则测试数据 comrulData = self.get_table_data("add_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_add_button() self.command.select_command_type((data[2])) self.command.set_command(data[3]) self.command.click_add_command_button() self.command.set_test_command(data[4]) self.command.click_test_command_button() self.cmf.click_login_msg_button() if int(data[2]) == 2: self.command.click_approver_command() self.command.check_all_user() self.command.click_add_users_button() self.command.check_all_user() self.command.click_add_resource_button() self.command.check_all_resource() self.command.click_save_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print("add_command_rule fail:" + str(e)) self.log.log_end("add_command_rule") u'''编辑命令规则''' def mod_command_rule_002(self): #日志开始记录 self.log.log_start("mod_command_rule") #获取编辑命令规则测试数据 comrulData = self.get_table_data("mod_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_action_public_command(data[2], data[3]) self.command.set_command(data[4]) self.command.click_add_command_button() self.command.click_save_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print("mod_command_rule fail:" + str(e)) self.log.log_end("mod_command_rule") u'''操作命令规则''' def option_command_rule_003(self): #日志开始记录 self.log.log_start("option_command_rule") #获取操作命令规则测试数据 comrulData = self.get_table_data("option_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if dataRow == 1: self.command.click_del_command() elif dataRow == 2: self.command.click_deploy_command() elif dataRow == 3 or dataRow == 4: self.command.click_action_public_command( data[2], data[3]) elif dataRow == 5 or dataRow == 6: time.sleep(5) self.command.click_action_public_command( data[2], data[3]) self.command.set_row_command(data[4]) self.command.check_sure_button() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) time.sleep(3) self.command.click_cancel_button() continue self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print("option_command_rule fail:" + str(e)) self.log.log_end("option_command_rule") u'''校验命令规则''' def check_command_rule_004(self): #日志开始记录 self.log.log_start("check_command_rule") #获取校验命令规则测试数据 comrulData = self.get_table_data("check_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() self.command.click_add_button() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if data[2] != "no": self.command.select_command_type((data[2])) if data[3] != "no": self.command.set_command(data[3]) self.command.click_add_command_button() if data[4] != "no": self.command.set_test_command(data[4]) self.command.click_test_command_button() if dataRow == 4: self.command.click_save_command() elif dataRow == 5: self.command.click_add_users_button() self.command.check_all_user() self.command.click_save_command() elif dataRow == 6: self.command.click_add_resource_button() self.command.check_all_resource() self.command.click_save_command() elif dataRow == 7: self.command.click_approver_command() self.command.check_all_user() self.command.clear_command() self.command.click_save_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print("check_command_rule fail:" + str(e)) self.command.click_back_command() self.log.log_end("check_command_rule") u'''命令审批''' def command_approval_005(self): self.frameElem.from_frame_to_otherFrame("topFrame") self.cmf.select_role_by_text(u"运维操作员") #日志开始记录 self.log.log_start("command_approval") #获取命令审批测试数据 comrulData = self.get_table_data("command_approval") for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.sso_command(data) handles = self.driver.window_handles if dataRow == 2: self.command.command_by_message_approval( data[6], data[7], data[8]) self.cmf.click_login_msg_button() self.driver.switch_to.window(handles[1]) self.driver.close() self.driver.switch_to.window(handles[0]) #关闭浏览器 self.log.log_detail(data[0], True) except Exception as e: print("command_approval fail:" + str(e)) self.log.log_end("command_approval") u'''删除命令规则''' def del_command_rule_006(self): # self.comsuit.sys_switch_to_dep() # self.comsuit.switch_to_moudle(u"运维管理", u"规则定义") #日志开始记录 self.log.log_start("del_command_rule") #获取删除命令规则测试数据 comrulData = self.get_table_data("del_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_action_public_command(data[2], data[3]) self.command.click_del_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.cmf.click_login_msg_button() except Exception as e: print("del_command_rule fail:" + str(e)) self.log.log_end("del_command_rule")
class testAddress(object): def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.getElem = getElement(driver) self.loginElem = loginPage(driver) self.adrerule = AddressRule(driver) u'''获取测试数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): dataFile = dataFileName() adrerulePath = dataFile.get_adrerule_test_data_url() adreruleData = dataFile.get_data(adrerulePath, sheetname) return adreruleData u'''添加地址规则''' def add_address_rule_001(self): #日志开始记录 self.log.log_start("add_address_rule") #获取添加地址规则测试数据 adreruleData = self.get_table_data("add_address_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(adreruleData)): data = adreruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_add_button() self.adrerule.set_rulename((data[2])) self.timerule.select_depart(data[3]) self.timerule.set_status_type(data[4]) self.adrerule.checkbox_ip_rule(data[5]) self.adrerule.set_ip(data[6]) self.adrerule.set_ip_mask(data[7]) if dataRow != 1 and dataRow != 5: if dataRow == 3 or dataRow == 7: self.adrerule.click_add_ip_segment() self.adrerule.set_ip_start(data[9]) self.adrerule.set_ip_end(data[10]) else: self.adrerule.set_ip_test(data[8]) self.adrerule.click_test() self.cmf.click_msg_button(1) self.adrerule.set_description(data[11]) self.adrerule.click_save() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() self.comsuit.switch_to_moudle(u'运维管理', u'用户') self.adrerule.edit_user_address_rule(data[12], data[13]) self.comsuit.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(2) except Exception as e: print("add_address_rule fail:" + str(e)) self.comsuit.user_quit() self.log.log_end("add_address_rule") u'''添加地址规则结果''' def add_address_rule_result_002(self): #日志开始记录 self.log.log_start("add_address_rule_result") #获取添加地址规则测试数据 adreruleData = self.get_table_data("add_address_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() for dataRow in range(len(adreruleData)): data = adreruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: list = [data[14], data[15], data[16], data[17], data[18]] self.loginElem.login(list) self.frameElem.from_frame_to_otherFrame("topFrame") if self.getElem.is_element_exsit('id', "logout"): self.comsuit.user_quit() flag = True self.cmf.test_win_check_point("xpath", comrulMsg, list, flag) except Exception as e: print("add_address_rule_result fail:" + str(e)) self.comsuit.login_and_switch_to_dep() self.comsuit.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(2) self.log.log_end("add_address_rule_result") u'''编辑地址规则''' def mod_address_rule_003(self): #日志开始记录 self.log.log_start("mod_address_rule") #获取编辑地址规则测试数据 adreruleData = self.get_table_data("mod_address_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(adreruleData)): data = adreruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.adrerule.click_edit_address(data[2]) self.adrerule.set_rulename((data[3])) self.timerule.set_status_type(data[4]) self.adrerule.checkbox_ip_rule(data[5]) self.adrerule.set_ip(data[6]) self.adrerule.set_ip_mask(data[7]) self.adrerule.set_ip_start(data[8]) self.adrerule.set_ip_end(data[9]) self.adrerule.set_description(data[10]) self.adrerule.click_save() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print("mod_address_rule fail:" + str(e)) self.log.log_end("mod_address_rule") u'''校验地址规则''' def check_address_rule_004(self): #日志开始记录 self.log.log_start("check_address_rule") #获取校验地址规则测试数据 adreruleData = self.get_table_data("check_address_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() self.command.click_add_button() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(adreruleData)): data = adreruleData[dataRow] try: if dataRow != 0: #如果不是第一行标题,则读取数据 if dataRow == 2: self.adrerule.checkbox_ip_rule(data[3]) elif dataRow == 3 or dataRow == 4: self.adrerule.set_ip(data[4]) elif dataRow == 5: self.adrerule.set_ip_mask(data[5]) elif dataRow != 1: self.adrerule.set_rulename(data[2]) self.adrerule.click_save() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print("check_address_rule fail:" + str(e)) self.command.click_back_command() self.log.log_end("check_address_rule") u'''检索地址规则''' def query_address_rule_005(self): #日志开始记录 self.log.log_start("query_address_rule") #获取检索地址规则测试数据 adreruleData = self.get_table_data("query_address_rule") for dataRow in range(len(adreruleData)): data = adreruleData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.timerule.click_reset_time() if dataRow != 4: self.adrerule.set_search_addressname((data[1])) self.adrerule.click_search_address() self.log.log_detail(data[0], True) except Exception as e: print("query_address_rule fail:" + str(e)) self.log.log_end("query_address_rule") u'''删除地址规则''' def del_address_rule_006(self): #日志开始记录 self.log.log_start("del_address_rule") #获取删除地址规则测试数据 adrerulData = self.get_table_data("del_address_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(adrerulData)): data = adrerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if dataRow == 1: self.adrerule.click_bulkdel_address() else: self.adrerule.click_del_address(data[2]) self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) if dataRow != 1: self.cmf.click_login_msg_button() except Exception as e: print("del_address_rule fail:" + str(e)) self.log.log_end("del_address_rule")
class testCommand(object): def __init__(self,driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.sso = testSso(driver) self.comsuit = CommonSuiteData(driver) u'''获取测试数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): dataFile = dataFileName() comrulPath = dataFile.get_command_test_data_url() comrulData = dataFile.get_data(comrulPath, sheetname) return comrulData u'''添加命令规则''' def add_command_rule_001(self): #日志开始记录 self.log.log_start("add_command_rule") #获取添加命令规则测试数据 comrulData = self.get_table_data("add_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_add_button() self.command.select_command_type((data[2])) self.command.set_command(data[3]) self.command.click_add_command_button() self.command.set_test_command(data[4]) self.command.click_test_command_button() self.cmf.click_login_msg_button() if int(data[2]) == 2: self.command.click_approver_command() self.command.check_all_user() self.command.click_add_users_button() self.command.check_all_user() self.command.click_add_resource_button() self.command.check_all_resource() self.command.click_save_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print ("add_command_rule fail:" + str(e)) self.log.log_end("add_command_rule") u'''编辑命令规则''' def mod_command_rule_002(self): #日志开始记录 self.log.log_start("mod_command_rule") #获取编辑命令规则测试数据 comrulData = self.get_table_data("mod_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_action_public_command(data[2], data[3]) self.command.set_command(data[4]) self.command.click_add_command_button() self.command.click_save_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print ("mod_command_rule fail:" + str(e)) self.log.log_end("mod_command_rule") u'''操作命令规则''' def option_command_rule_003(self): #日志开始记录 self.log.log_start("option_command_rule") #获取操作命令规则测试数据 comrulData = self.get_table_data("option_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if dataRow == 1: self.command.click_del_command() elif dataRow == 2: self.command.click_deploy_command() elif dataRow == 3 or dataRow == 4: self.command.click_action_public_command(data[2], data[3]) elif dataRow == 5 or dataRow == 6: time.sleep(5) self.command.click_action_public_command(data[2], data[3]) self.command.set_row_command(data[4]) self.command.check_sure_button() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) time.sleep(3) self.command.click_cancel_button() continue self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print ("option_command_rule fail:" + str(e)) self.log.log_end("option_command_rule") u'''校验命令规则''' def check_command_rule_004(self): #日志开始记录 self.log.log_start("check_command_rule") #获取校验命令规则测试数据 comrulData = self.get_table_data("check_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() self.command.click_add_button() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if data[2] != "no": self.command.select_command_type((data[2])) if data[3] != "no": self.command.set_command(data[3]) self.command.click_add_command_button() if data[4] != "no": self.command.set_test_command(data[4]) self.command.click_test_command_button() if dataRow == 4: self.command.click_save_command() elif dataRow == 5: self.command.click_add_users_button() self.command.check_all_user() self.command.click_save_command() elif dataRow == 6: self.command.click_add_resource_button() self.command.check_all_resource() self.command.click_save_command() elif dataRow == 7: self.command.click_approver_command() self.command.check_all_user() self.command.clear_command() self.command.click_save_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print ("check_command_rule fail:" + str(e)) self.command.click_back_command() self.log.log_end("check_command_rule") u'''命令审批''' def command_approval_005(self): self.frameElem.from_frame_to_otherFrame("topFrame") self.cmf.select_role_by_text(u"运维操作员") #日志开始记录 self.log.log_start("command_approval") #获取命令审批测试数据 comrulData = self.get_table_data("command_approval") for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.sso_command(data) handles = self.driver.window_handles if dataRow == 2: self.command.command_by_message_approval(data[6], data[7], data[8]) self.cmf.click_login_msg_button() self.driver.switch_to.window(handles[1]) self.driver.close() self.driver.switch_to.window(handles[0]) #关闭浏览器 self.log.log_detail(data[0], True) except Exception as e: print ("command_approval fail:" + str(e)) self.log.log_end("command_approval") u'''删除命令规则''' def del_command_rule_006(self): # self.comsuit.sys_switch_to_dep() # self.comsuit.switch_to_moudle(u"运维管理", u"规则定义") #日志开始记录 self.log.log_start("del_command_rule") #获取删除命令规则测试数据 comrulData = self.get_table_data("del_command_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(comrulData)): data = comrulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_action_public_command(data[2], data[3]) self.command.click_del_command() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.cmf.click_login_msg_button() except Exception as e: print ("del_command_rule fail:" + str(e)) self.log.log_end("del_command_rule")
class CommonSuiteData(): def __init__(self, driver): self.driver = driver self.dataFile = dataFileName() self.cmf = commonFun(self.driver) self.initDriver = initDriver() self.loginElem = loginPage(self.driver) self.roleElem = Role(self.driver) self.userElem = UserPage(self.driver) self.frameElem = frameElement(self.driver) self.authElem = AuthMethodPage(self.driver) self.dptment = Department(self.driver) self.resource = Resource(self.driver) self.account = Accountmgr(self.driver) self.windowsElem = WindowsResource(self.driver) self.databaseElem = DatabaseResource(self.driver) self.usergroup = Usergroup(self.driver) self.regroup = Regroup(self.driver) self.appElem = AppPage(self.driver) self.authorizationElem = AuthorizationPage(self.driver) self.testAutho = testAuthorization(self.driver) self.clientElem = ClientPage(self.driver) self.command = CommandRule(self.driver) self.ntp = NtpService(self.driver) self.mail = MailPage(self.driver) self.syslog = Syslog(driver) self.ssoElem = SsoPage(self.driver) self.alarm = AlarmPage(self.driver) self.PwdStr = PwdStrategy(self.driver) self.passwdenvelope = EnvelopePage(self.driver) u'''切换模块 parameter: levelText1 : 一级模块名称 levelText2 : 二级模块名称 ''' def switch_to_moudle(self, levelText1, levelText2): time.sleep(2) self.frameElem.from_frame_to_otherFrame("topFrame") self.cmf.select_menu(levelText1) self.cmf.select_menu(levelText1, levelText2) #----------------------------------------用户相关------------------------------ u'''填写用户信息 parameters: data[1] : 用户名称 data[3] : 用户账号 data[4] : 用户密码 data[5] : 确认密码 data[6] : 开始时间 data[7] : 访问方式 data[8] : AD域账号 roleText : 用户角色 ''' def set_user_basic_info(self, data, roleText, status='no'): self.frameElem.from_frame_to_otherFrame("mainFrame") if status != 'no': self.userElem.add_role_button() else: self.userElem.add_button() self.userElem.set_user_account(data[3]) self.userElem.set_user_name(data[1]) self.userElem.set_user_pwd(data[4]) self.userElem.set_user_enquire_pwd(data[5]) self.userElem.set_start_time(data[6]) if data[12] != "": self.userElem.set_user_email(data[12]) if data[10] != "": self.userElem.set_dep(data[10]) if data[7] != "": #设置访问方式 self.userElem.click_advanced_option() self.userElem.set_auth_method_rule(data[7]) #访问方式不是默认方式 if int(data[7]) != 2: self.userElem.set_ad_name(data[8]) if data[9] != "": self.userElem.set_user_role(roleText) self.userElem.click_role_add_button() self.userElem.save_button() self.cmf.click_login_msg_button() u'''删除用户''' def del_user(self): self.switch_to_moudle(u"运维管理", u"用户") self.frameElem.from_frame_to_otherFrame("mainFrame") self.userElem.select_all_button() self.userElem.del_button() self.frameElem.switch_to_content() self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() u'''用户退出''' def user_quit(self): self.loginElem.quit() #-----------------------------部门-------------------------------------------- u'''填写部门名称 parameters : data[0] : 部门名称 data[1] : 操作类型(添加:0) data[2] : 添加的部门名称 ''' def set_dep(self, data): self.switch_to_moudle(u"运维管理", u"组织定义") self.dptment.click_left_department() #点击展开按钮 self.dptment.click_dept_switch() self.dptment.click_basic_operation(data[0], int(data[1])) self.dptment.popup_sendkey(data[2]) self.dptment.click_ok_button() self.cmf.click_login_msg_button() def set_del_dep(self, data): self.switch_to_moudle(u"运维管理", u"组织定义") self.dptment.click_left_department() self.dptment.click_dept_switch() self.dptment.click_basic_operation(data[0], int(data[1])) self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() #-----------------------------用户组------------------------------------------ u'''添加用户到用户组''' def set_user_to_group(self, data): # self.usergroup.click_left_usergroup() # self.usergroup.click_usergroup_switch() self.usergroup.click_usergroup_add_user(data[3], data[4]) self.regroup.check_depart(data[5]) self.usergroup.click_usergroup_add_user_query() self.regroup.check_all_resource() self.regroup.click_resource_okbutton() self.cmf.click_login_msg_button() u'''填写用户组信息 parameters: data[0] : 操作类型(添加:0) data[1] : 部门名称 data[2] : 编辑的用户组名称 data[3] : 添加的用户组名称 ''' def set_add_user_group(self, data): self.switch_to_moudle(u"运维管理", u"组织定义") self.usergroup.click_left_usergroup() self.usergroup.click_usergroup_switch() self.usergroup.usergroup_click_basic_operation(int(data[0]), data[1], data[2]) self.dptment.popup_sendkey(data[3]) self.dptment.click_ok_button() self.cmf.click_login_msg_button() if data[4] != "": self.set_user_to_group(data) u'''删除用户组 parameters : data[0] : 操作类型(删除:4) data[1] : 部门名称 data[2] : 删除的用户组名称 ''' def set_del_user_group(self, data): self.switch_to_moudle(u"运维管理", u"组织定义") self.usergroup.click_left_usergroup() self.usergroup.click_usergroup_switch() self.usergroup.usergroup_click_basic_operation(int(data[0]), data[1], data[2]) self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() #-----------------------------资源组------------------------------------------ u'''添加资源到资源组''' def set_res_to_group(self, data): self.regroup.click_regroup_add_resouce(data[3], data[4]) self.regroup.check_depart(data[5]) self.regroup.click_regroup_add_resouce_query() self.regroup.check_all_resource() self.regroup.click_resource_okbutton() time.sleep(1) self.cmf.click_login_msg_button() u'''填写资源组信息 parameters: data[0] : 操作类型(添加:0) data[1] : 部门名称 data[2] : 编辑的资源组名称 data[3] : 添加的资源组名称 ''' def set_add_res_group(self, data): self.switch_to_moudle(u"运维管理", u"组织定义") self.regroup.click_left_regroup() self.regroup.click_regroup_switch() self.regroup.regroup_click_basic_operation(int(data[0]), data[1], data[2]) self.dptment.popup_sendkey(data[3]) self.dptment.click_ok_button() self.cmf.click_login_msg_button() if data[4] != "": self.set_res_to_group(data) u'''删除资源组 parameters : data[0] : 操作类型(删除:4) data[1] : 部门名称 data[2] : 删除的资源组名称 ''' def set_del_res_group(self, data): self.switch_to_moudle(u"运维管理", u"组织定义") self.regroup.click_left_regroup() self.regroup.click_regroup_switch() self.regroup.regroup_click_basic_operation(int(data[0]), data[1], data[2]) self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() #-----------------------------资源-------------------------------------------- u'''填写资源基本信息 parameters : data[0]:资源类型 data[1]:资源名称 data[2]:资源IP data[3]:部门 ''' def set_resource_info(self, data): self.switch_to_moudle(u"运维管理", u"资源") self.frameElem.from_frame_to_otherFrame("mainFrame") self.resource.click_add_edit_button() self.resource.select_resource_type(data[0]) self.resource.set_resource_name(data[1]) self.resource.set_resource_ip(data[2]) if data[3] != 'no': time.sleep(5) self.resource.set_depart(data[3]) #选择协议 if data[4] != "": self.resource.select_agreement(data[4]) if data[5] != "": self.resource.click_account_sync() self.resource.set_admin_account(data[5]) self.resource.set_admin_pwd(data[6]) self.resource.set_confirm_pwd(data[7]) #提权口令 if data[8] != "": self.resource.click_up_super() self.resource.set_super_pwd(data[8]) self.resource.set_super_confirm_pwd(data[9]) #填写域名 if data[10] != "": self.databaseElem.set_domain_name(data[10]) #账号分类 if data[11] != "": self.resource.click_account_sync() self.windowsElem.select_account_type(data[11]) #归属域控主机 if data[12] != "": self.windowsElem.select_attach_domian(data[12]) #主机名 if data[13] != "": self.databaseElem.set_host_name(data[13]) self.resource.click_save_button() self.cmf.click_login_msg_button() time.sleep(3) # self.driver.implicitly_wait(3) self.cmf.back() u'''填写数据库基本信息''' def set_database_res_info(self, data): self.switch_to_moudle(u"运维管理", u"资源") self.frameElem.from_frame_to_otherFrame("mainFrame") self.resource.click_add_edit_button() self.resource.select_resource_type(data[2]) self.databaseElem.add_edit_database_resource(data) self.cmf.click_login_msg_button() time.sleep(3) self.cmf.back() u'''填写资源账号基本信息 parameters: data[1]:资源名称 data[4] : 账号编辑方式 data[5] : 账号名称 data[6] : 口令 data[7] : 确认口令 ''' def set_res_account(self, data): self.switch_to_moudle(u"运维管理", u"资源") self.account.click_account_manage_button(data[0]) time.sleep(1) self.account.click_account_add_edit_button(data[2]) self.account.select_edit_way(data[1]) if data[2] != "no": self.account.set_account_name(data[2]) self.account.set_account_pwd(data[3]) self.account.set_account_confirm_pwd(data[4]) self.account.set_authorize() self.account.click_save_account() self.cmf.click_login_msg_button() #-----------------------------授权---------------------------------------- u'''填写授权基本信息 parameters: data[1]:授权名称 data[2]:部门名称 data[3]:状态 ''' def set_authorization(self, data): self.switch_to_moudle(u'运维管理', u'授权') self.authorizationElem.add_button() self.authorizationElem.set_auth_name(data[1]) self.authorizationElem.set_dep(data[2], data[3]) self.authorizationElem.click_add_user() self.authorizationElem.set_select_user_search_button() self.authorizationElem.set_user_check_all_button() self.authorizationElem.set_ok_button() #添加资源 self.authorizationElem.click_add_res() self.authorizationElem.set_select_res_search_button() self.authorizationElem.set_res_check_all_button() self.authorizationElem.set_ok_button() self.authorizationElem.save_button() self.cmf.click_login_msg_button() self.cmf.back() #---------------------------------填写应用发布信息---------------------------- u'''填写应用发布信息''' def set_application_info(self, data): self.switch_to_moudle(u"系统配置", u"关联服务") self.appElem.app_module_button() self.appElem.click_add_button() self.appElem.set_name(data[0]) self.appElem.set_ip(data[1]) self.appElem.set_app_account(data[3]) self.appElem.set_pwd(data[4]) self.appElem.set_repwd(data[5]) self.appElem.ip_is_succ() self.appElem.click_save_button() self.cmf.click_login_msg_button() u'''删除应用发布''' def del_application(self, rowList): self.switch_to_moudle(u"系统配置", u"关联服务") self.appElem.app_module_button() self.frameElem.from_frame_to_otherFrame("rigthFrame") app_data = self.get_table_data("add_application") for dataRow in rowList: data = app_data[dataRow] if dataRow != 0: self.appElem.operate_del(data[0]) self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() #-------------------------------------客户端----------------------------------- u'''填写客户端基本信息''' def set_client_info(self, data): #self.switch_to_moudle(u"系统配置",u"客户端配置") self.frameElem.from_frame_to_otherFrame("mainFrame") self.clientElem.add_button() self.clientElem.set_client_name(data[2]) self.clientElem.set_action_stream(data[3]) self.clientElem.set_database_res_type(data[0], data[1]) self.clientElem.save_button() u'''删除客户端''' def set_delete_client_info(self, data): #self.switch_to_moudle(u"系统配置",u"客户端配置") self.frameElem.from_frame_to_otherFrame("mainFrame") self.clientElem.select_query_res_type(data[0], data[1]) self.clientElem.click_query_button() self.clientElem.del_operation(data[2]) self.cmf.click_login_msg_button() #------------------------------资源账号授权------------------------------------ u'''添加用户和资源账号类型的授权''' def set_authorization_info(self, data): self.switch_to_moudle(u"运维管理", u"授权") self.testAutho.common_part(data) self.testAutho.add_user(data) self.authorizationElem.click_add_res_account() self.authorizationElem.set_select_res_ip(data[6]) self.authorizationElem.set_select_res_account(data[8]) self.authorizationElem.set_select_res_search_button() self.authorizationElem.set_res_check_all_button() self.authorizationElem.set_ok_button() self.authorizationElem.res_account_status() self.authorizationElem.save_button() self.cmf.click_login_msg_button() u'''删除授权''' def del_authorization(self): self.switch_to_moudle(u"运维管理", u"授权") self.frameElem.from_frame_to_otherFrame("mainFrame") self.authorizationElem.check_all() self.authorizationElem.del_button() self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() #-----------------------------数据---------------------------------------- u'''获取数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): filePath = self.dataFile.get_common_suite_test_data_url() fileData = self.dataFile.get_data(filePath, sheetname) return fileData u'''添加应用发布''' def add_application(self, rowList): app_data = self.get_table_data('add_application') for dataRow in rowList: data = app_data[dataRow] if dataRow != 0: self.set_application_info(data) u'''初始化用户登录''' def isomper_login(self): login_data = self.get_table_data('add_user') logindata = login_data[4] self.loginElem.login(logindata) u'''添加用户数据模板''' def add_user_data_module(self, rowList): self.switch_to_moudle(u"运维管理", u"用户") user_data = self.get_table_data("add_user") for dataRow in rowList: data = user_data[dataRow] if dataRow != 0: self.set_user_basic_info(data, data[9], data[13]) self.userElem.click_back_button() u'''添加系统管理员和部门管理员的用户''' def add_user_with_role(self): rowList = [1] self.add_user_data_module(rowList) u'''登录并切换至角色公用方法 parameters: login_status :'no'(登录状态:没有登录) ''' def login_and_switch_to_common(self, login_status='no'): login_data = self.get_table_data("add_user") logindata = login_data[1] if login_status == 'no': self.loginElem.login(logindata) #获取角色 roleList = logindata[9].split(',') return roleList u'''使用系统管理员登录系统''' def login_sysadmin(self): login_data = self.get_table_data('add_user') logindata = login_data[1] self.loginElem.login(logindata) u'''使用安全保密管理员登录系统''' def login_secadmin(self): login_data = self.get_table_data('add_user') logindata = login_data[2] self.loginElem.login(logindata) u'''使用安全审计员登录系统''' def login_sysaudit(self): login_data = self.get_table_data('add_user') logindata = login_data[3] self.loginElem.login(logindata) u'''用户登录系统''' def login_user(self, row): login_data = self.get_table_data('add_user') logindata = login_data[int(row)] self.loginElem.login(logindata) u'''切换至运维操作员''' def switch_to_operation(self): self.cmf.select_role_by_text(u"运维操作员") #使用新添加的用户登录 def use_new_user_login(self): login_data = self.get_table_data("add_user") logindata = login_data[1] time.sleep(2) self.loginElem.login(logindata) u'''运维管理员登录''' def sso_user_login(self, rowList): login_data = self.get_table_data("add_user") logindata = login_data[rowList] time.sleep(1) self.loginElem.login(logindata) u'''运维管理员AD域方式登录''' def sso_user_ad_login(self, rowList): login_data = self.get_table_data("add_user") logindata = login_data[rowList] self.frameElem.switch_to_content() self.loginElem.set_login_method(logindata[2]) self.loginElem.set_ad_login_username(logindata[3]) self.loginElem.set_ad_login_pwd(logindata[11]) time.sleep(1) self.loginElem.click_login_button() u'''添加认证配置''' def add_meth_method(self): meth_data = self.get_table_data("meth_method") methData = meth_data[1] self.switch_to_moudle(u"策略配置", u"认证强度") self.authElem.select_all_auth(methData) u'''会话配置,设置最大登录数''' def set_login_max_num(self): self.loginElem.set_max_login_count() u'''添加登录测试数据''' def add_login_data(self): rowList = [2, 3, 4, 5, 6, 7] self.add_user_data_module(rowList) u'''添加授权用户''' def add_authorization_user(self): rowList = [8, 9, 10, 11, 12] self.add_user_data_module(rowList) u'''添加应用发布用户''' def add_app_user(self): rowList = [3] self.add_user_data_module(rowList) u'''添加单点登录用户''' def add_sso_user(self): rowList = [6, 8, 9, 10, 11, 13] self.add_user_data_module(rowList) u'''添加部门''' def add_dep(self, rowList): dep_data = self.get_table_data("add_dep") for dataRow in rowList: data = dep_data[dataRow] if dataRow != 0: self.set_dep(data) u'''删除部门''' def del_dep(self, rowList): dep_data = self.get_table_data("del_dep") for dataRow in rowList: data = dep_data[dataRow] if dataRow != 0: self.set_del_dep(data) u'''增加资源数据模板''' def add_resource_modele(self, rowList): res_data = self.get_table_data("add_res") for dataRow in rowList: data = res_data[dataRow] if dataRow != 0: self.set_resource_info(data) u'''添加授权资源''' def add_resource(self): rowList = [1, 2] self.add_resource_modele(rowList) u'''添加sso资源''' def add_sso_resource(self): #rowList = [1,2,3,4,5,7,8] rowList = [1, 3, 4, 5] self.add_resource_modele(rowList) u'''添加依附操作系统''' def add_database_resource(self): rowList = [2] self.add_resource_modele(rowList) u'''添加资源账号数据模板''' def add_res_account_module(self, rowList): account_data = self.get_table_data("res_account") for dataRow in rowList: data = account_data[dataRow] if dataRow != 0: self.set_res_account(data) u'''添加授权资源账号''' def add_res_account(self): rowList = [1, 3] self.add_res_account_module(rowList) u'''添加sso资源账号''' def add_sso_res_account(self): rowList = [1, 2, 4, 5, 6, 7] #rowList = [1,2,3,4,5,6,7,9,10] self.add_res_account_module(rowList) u'''添加用户组''' def add_user_group(self, rowList): user_group_data = self.get_table_data("add_user_group") for dataRow in rowList: data = user_group_data[dataRow] if dataRow != 0: self.set_add_user_group(data) u'''删除用户组''' def del_user_group(self, rowList): user_group_data = self.get_table_data("del_user_group") for dataRow in rowList: data = user_group_data[dataRow] if dataRow != 0: self.set_del_user_group(data) u'''添加资源组''' def add_res_group(self, rowList): res_group_data = self.get_table_data("add_res_group") for dataRow in rowList: data = res_group_data[dataRow] if dataRow != 0: self.set_add_res_group(data) u'''删除资源组''' def del_res_group(self, rowList): res_group_data = self.get_table_data("del_res_group") for dataRow in rowList: data = res_group_data[dataRow] if dataRow != 0: self.set_del_res_group(data) u'''添加授权''' def add_authrization(self, rowList): auth_data = self.get_table_data("add_authorization") for dataRow in rowList: data = auth_data[dataRow] if dataRow != 0: self.set_authorization(data) u'''添加授权数据模板''' def add_authorization_module(self, rowList): autho_data = self.get_table_data("add_account_auth") for dataRow in rowList: data = autho_data[dataRow] if dataRow != 0: self.set_authorization_info(data) self.authorizationElem.back_button() u'''添加单点登录授权''' def add_sso_authorization(self): rowList = [1] #rowList = [1,2,3,4,5,6,7] self.add_authorization_module(rowList) u'''单点登录模板''' def sso_module(self, rowList): sso_data = self.get_table_data("sso") for dataRow in rowList: data = sso_data[dataRow] if dataRow != 0: self.frameElem.from_frame_to_otherFrame("rigthFrame") self.ssoElem.select_account(data[0], data[1]) self.ssoElem.select_sso_icon(data[0], data[2]) if data[3] != "": self.ssoElem.select_protocol(data[3]) #self.ssoElem.execute_chrome_key() self.ssoElem.choice_browser(data[2], data[4], data[5], data[6]) u'''添加客户端数据模板''' def add_client_module(self, rowList): client_data = self.get_table_data("add_client") self.switch_to_moudle(u"系统配置", u"客户端配置") for dataRow in rowList: data = client_data[dataRow] if dataRow != 0: self.set_client_info(data) u'''删除客户端数据模板''' def del_client_module(self, rowList): client_data = self.get_table_data("del_client") self.switch_to_moudle(u"系统配置", u"客户端配置") for dataRow in rowList: data = client_data[dataRow] if dataRow != 0: self.set_delete_client_info(data) u'''添加数据库资源模板''' def add_database_res_module(self, rowList): database_data = self.get_table_data("add_database") for dataRow in rowList: data = database_data[dataRow] if dataRow != 0: self.set_database_res_info(data) u'''删除用户数据模板''' def del_user_data_module(self, rowList): self.switch_to_moudle(u"运维管理", u"用户") self.frameElem.from_frame_to_otherFrame("mainFrame") user_data = self.get_table_data("add_user") for dataRow in rowList: data = user_data[dataRow] if dataRow != 0: self.switch_to_moudle(u"运维管理", u"用户") self.userElem.operate_delete(data[1]) self.frameElem.switch_to_content() self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() u'''添加密码策略数据模板''' def add_strategy_data_module(self, rowList): self.switch_to_moudle(u"策略配置", u"密码策略") self.frameElem.from_frame_to_otherFrame("mainFrame") pwd_data = self.get_table_data("add_strategy") for dataRow in rowList: data = pwd_data[dataRow] if dataRow != 0: self.PwdStr.add_pwd_button() self.PwdStr.set_pwd_name(data[1]) self.PwdStr.term_of_validity(data[2]) self.PwdStr.password_length_min(data[3]) self.PwdStr.password_length_max(data[4]) self.PwdStr.set_lower_case(data[5]) self.PwdStr.set_capital(data[6]) self.PwdStr.set_minimum_digital(data[7]) self.PwdStr.set_Minimum_symbol(data[8]) self.PwdStr.save_button() self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.PwdStr.return_button() u'''删除密码策略数据模板''' def del_strategy_data_module(self, rowList): self.switch_to_moudle(u"策略配置", u"密码策略") self.frameElem.from_frame_to_otherFrame("mainFrame") pwd_data = self.get_table_data("add_strategy") for dataRow in rowList: data = pwd_data[dataRow] if dataRow != 0: self.PwdStr.del_sing_strategy(data[1]) self.frameElem.switch_to_content() self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() u'''删除资源数据模板''' def del_resource_modele(self, rowList): self.switch_to_moudle(u"运维管理", u"资源") self.frameElem.from_frame_to_otherFrame("mainFrame") res_data = self.get_table_data("add_res") for dataRow in rowList: data = res_data[dataRow] if dataRow != 0: self.resource.click_del_button(data[1]) self.frameElem.switch_to_content() self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() u'''删除授权数据模板''' def del_authorization_module(self, rowList): self.switch_to_moudle(u'运维管理', u'授权') self.frameElem.from_frame_to_otherFrame("mainFrame") autho_data = self.get_table_data("add_account_auth") for dataRow in rowList: data = autho_data[dataRow] if dataRow != 0: self.authorizationElem.click_auth_checkbox(data[2]) self.authorizationElem.del_button() self.frameElem.switch_to_content() self.cmf.click_login_msg_button() self.cmf.click_login_msg_button() #-------------------------------添加涉密版用户前置条件--------------------------------------- u'''前置条件通用''' def secret_user_prefix_condition(self): self.isomper_login() self.switch_to_moudle(u'角色管理', u'角色定义') #------------------------------部门前置条件----------------------------------- def depart_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到组织定义 self.switch_to_moudle(u"运维管理", u"组织定义") #------------------------------资源组前置条件----------------------------------- def regroup_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() #添加资源 self.add_resource_modele([9, 6]) self.user_quit() #使用系统管理员登录 self.login_sysadmin() #切换到组织定义 self.switch_to_moudle(u"运维管理", u"组织定义") def regroup_module_post_condition(self): self.user_quit() #使用安全保密管理员登录 self.login_secadmin() #删除资源 self.del_resource_modele([9, 6]) self.user_quit() #------------------------------用户组前置条件----------------------------------- def usergroup_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #添加用户 self.add_user_data_module([5, 6, 7, 8]) #切换到组织定义 self.switch_to_moudle(u"运维管理", u"组织定义") def usergroup_module_post_condition(self): self.del_user_data_module([5, 6, 7, 8]) self.user_quit() #------------------------------NTP服务前置条件--------------------------------- def ntp_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到NTP服务 self.switch_to_moudle(u'系统配置', u'关联服务') self.ntp.click_left_moudle(0) #-------------------------------SYSLOG前置条件--------------------------------- def syslog_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到NTP服务 self.switch_to_moudle(u'系统配置', u'关联服务') self.ntp.click_left_moudle(1) #------------------------------邮件前置条件--------------------------------- def mail_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到邮件服务 self.switch_to_moudle(u'系统配置', u'关联服务') self.mail.click_left_moudle_test() #------------------------------密码信封前置条件--------------------------------- def passwd_envelope_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到邮件服务 self.switch_to_moudle(u'系统配置', u'关联服务') self.passwdenvelope.click_left_moudle_envelope() #-------------------------------应用发布后置条件------------------------------- def application_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() self.add_user_data_module([9, 10]) self.switch_to_moudle(u"系统配置", u"关联服务") def application_module_post_condition(self): self.del_user_data_module([9, 10]) self.user_quit() #-------------------------------网卡配置前置条件------------------------------- def network_card_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到网卡配置 self.switch_to_moudle(u'系统配置', u'网络配置') #-------------------------------路由配置前置条件------------------------------- def routing_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #切换到路由配置 self.cmf.select_menu(u'系统配置', u'网络配置', u'路由配置') #------------------------------备份还原前置条件----------------------------------- def backup_restore_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() #-----------------------------客户端配置前置条件------------------------------ def client_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() self.switch_to_moudle(u"系统配置", u"客户端配置") #-----------------------------AD域抽取前置条件------------------------------ def ad_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() self.add_user_data_module([18]) self.switch_to_moudle(u"系统配置", u"AD定时抽取") u'''AD域抽取后置条件''' def ad_module_post_condition(self): self.del_user_data_module([18]) self.user_quit() #------------------------------使用授权前置条件--------------------------------- def use_auth_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() self.switch_to_moudle(u'系统配置', u'使用授权') #------------------------------用户模块前置条件-------------------------------- u'''用户模块前置条件''' def user_module_prefix_condition(self): #使用系统管理员登录 self.login_sysadmin() self.switch_to_moudle(u'运维管理', u'用户') #--------------------------认证方式前置条件------------------------------------ u'''认证方式前置条件''' def auth_method_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() self.add_user_data_module([11]) self.switch_to_moudle(u"策略配置", u"认证强度") self.frameElem.from_frame_to_otherFrame("mainFrame") u'''认证方式后置条件''' def auth_method_post_condition(self): self.del_user_data_module([11]) self.user_quit() #---------------------------------登录模块前置条件----------------------------- u'''登录模块前置条件''' def login_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() #配置认证方式 self.add_meth_method() #配置最大登录数 self.set_login_max_num() #添加登录用户数据 self.add_user_data_module([12, 13, 14, 15, 16, 17]) #改变a的状态为关 self.userElem.change_user_status_off("gyrlogin2") #系统管理员退出 self.user_quit() u'''登录模块后置条件''' def login_module_post_condition(self): #使用安全保密管理员登录 self.login_secadmin() #删除认证方式 self.authElem.del_auth_method() self.del_user_data_module([12, 13, 14, 15, 16, 17]) self.user_quit() #------------------------------告警策略前置条件--------------------------------- def alarm_strategy_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() def alarm_strategy_module_post_condition(self): self.alarm.del_command_config() self.alarm.del_default_config() self.alarm.del_auth_config() self.user_quit() #------------------------------会话配置前置条件-------------------------------- def session_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() self.switch_to_moudle(u"策略配置", u"会话配置") #------------------------------密码策略前置条件-------------------------------- def pwdstr_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() #添加资源 self.add_resource_modele([14]) self.add_user_data_module([19]) self.switch_to_moudle(u"策略配置", u"密码策略") def pwdstr_module_post_condition(self): self.del_resource_modele([14]) self.del_user_data_module([19]) self.user_quit() #------------------------------linux资源前置条件----------------------------------- def linuxre_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() #添加密码策略 self.add_strategy_data_module([1]) #切换到资源 self.switch_to_moudle(u"运维管理", u"资源") def linuxre_module_post_condition(self): #删除密码策略 self.del_strategy_data_module([1]) self.user_quit() #------------------------------network资源前置条件----------------------------------- def networkre_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() #切换到资源 self.switch_to_moudle(u"运维管理", u"资源") #------------------------------windows资源前置条件----------------------------------- def windowre_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() #添加密码策略 self.add_strategy_data_module([2]) #切换到资源 self.switch_to_moudle(u"运维管理", u"资源") def windowre_module_post_condition(self): #删除密码策略 self.del_strategy_data_module([2]) self.user_quit() #-----------------------------数据库前置条件---------------------------------- def database_resource_prefix_condition(self): self.login_sysadmin() #添加应用发布 self.add_application([1]) self.user_quit() #使用安全保密管理员登录 self.login_secadmin() self.add_resource_modele([17]) self.switch_to_moudle(u"运维管理", u"资源") def database_resource_post_condition(self): self.del_resource_modele([17]) self.user_quit() self.login_sysadmin() self.del_application([1]) self.user_quit() #------------------------------授权前置条件----------------------------------- def authori_module_prefix_condition(self): #使用安全保密管理员登录 self.login_secadmin() self.add_resource_modele([15, 16]) self.add_res_account_module([18, 19]) self.user_quit() self.login_sysadmin() #添加授权用户 self.add_user_data_module([20, 21, 22, 23, 24]) self.add_res_group([1]) self.add_user_group([1]) self.user_quit() self.login_secadmin() self.switch_to_moudle(u'运维管理', u'授权') def authori_module_post_condition(self): self.del_resource_modele([15, 16]) self.user_quit() self.login_sysadmin() self.del_res_group([1]) self.del_user_group([1]) self.del_user_data_module([20, 21, 22, 23, 24]) self.user_quit() #------------------------------命令规则前置条件----------------------------------- def commandrule_module_prefix_condition(self): self.login_sysadmin() #添加用户 self.add_user_data_module([25]) self.user_quit() self.login_secadmin() #添加资源 self.add_resource_modele([3]) #添加资源账号 self.add_res_account_module([4]) #添加授权 self.add_authorization_module([2]) #切换到规则定义 self.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(0) def commandrule_module_post_condition(self): #删除授权 self.del_authorization_module([2]) #删除资源 self.del_resource_modele([3]) self.user_quit() self.login_sysadmin() #删除用户 self.del_user_data_module([25]) self.user_quit() #------------------------------时间规则前置条件----------------------------------- def timerule_module_prefix_condition(self): self.login_secadmin() #添加用户 self.add_user_data_module([26, 27, 28, 29, 30]) #切换到规则定义 self.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(1) def timerule_module_post_condition(self): #删除用户 self.del_user_data_module([26, 27, 28, 29, 30]) self.user_quit() #------------------------------地址规则前置条件----------------------------------- def addressrule_module_prefix_condition(self): self.login_secadmin() #添加用户 self.add_user_data_module([31, 32, 33, 34, 35, 36, 37, 38]) #切换到规则定义 self.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(2) def addressrule_module_post_condition(self): self.del_user_data_module([31, 32, 33, 34, 35, 36, 37, 38]) self.user_quit() #------------------------------资源时间规则前置条件----------------------------------- def retimerule_module_prefix_condition(self): self.login_sysadmin() #添加用户 self.add_user_data_module([39]) self.user_quit() self.login_secadmin() #添加资源 self.add_resource_modele([4, 5, 10]) #添加资源账号 self.add_res_account_module([5, 6, 14]) self.add_authorization_module([6]) #切换到规则定义 self.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(3) def retimerule_module_post_condition(self): self.user_quit() self.login_sysadmin() #删除用户 self.del_user_data_module([39]) self.user_quit() self.login_secadmin() #删除资源 self.del_resource_modele([4, 5, 10]) #删除授权 self.del_authorization_module([6]) self.user_quit() #------------------------------流程前置条件----------------------------------- def process_module_prefix_condition(self): self.login_sysadmin() #添加用户 self.add_user_data_module([40, 41, 42, 43, 44]) self.user_quit() self.login_secadmin() #添加资源 self.add_resource_modele([11, 12]) #添加资源账号 self.add_res_account_module([15, 16]) self.add_authrization([1]) def process_module_post_condition(self): #删除授权 self.del_authorization_module([7]) #删除资源 self.del_resource_modele([11, 12]) self.user_quit() self.login_sysadmin() #删除用户 self.del_user_data_module([40, 41, 42, 43, 44]) self.user_quit() #------------------------------双人授权前置条件----------------------------------- def dualmandate_module_prefix_condition(self): self.login_sysadmin() #添加用户 self.add_user_data_module([45, 46]) self.user_quit() self.login_secadmin() #添加资源 self.add_resource_modele([13]) #添加资源账号 self.add_res_account_module([17]) #添加授权 self.add_authrization([4]) def dualmandate_module_post_condition(self): #删除授权 self.del_authorization_module([8]) #删除资源 self.del_resource_modele([13]) self.user_quit() self.login_sysadmin() #删除用户 self.del_user_data_module([45, 46]) self.user_quit() #-----------------------------行为报表前置条件--------------------------------- def opt_report_module_prefix_condition(self): self.login_secadmin() self.add_resource_modele([18]) self.user_quit() self.login_sysadmin() self.add_user_data_module([47]) self.add_res_group([2]) self.add_user_group([2]) self.user_quit() self.login_sysaudit() self.switch_to_moudle(u"报表管理", u"审计报表") def opt_report_module_post_condition(self): self.user_quit() self.login_secadmin() self.del_resource_modele([18]) self.user_quit() self.login_sysadmin() self.del_user_data_module([47]) self.del_res_group([2]) self.del_user_group([2]) self.user_quit() #-----------------------------配置报表前置条件--------------------------------- def conf_report_module_prefix_condition(self): self.login_sysadmin() self.add_user_data_module([48]) self.add_user_group([3]) self.user_quit() self.login_sysaudit() self.switch_to_moudle(u"报表管理", u"审计报表") def conf_report_module_post_condition(self): self.user_quit() self.login_sysadmin() self.del_user_data_module([48]) self.del_user_group([3]) self.user_quit() #-----------------------------配置审计前置条件------------------------------ def system_log_prefix_condition(self): self.login_sysadmin() self.add_user_data_module([49]) self.switch_to_moudle(u"系统配置", u"关联服务") self.ntp.click_left_moudle(1) #填写syslog信息 self.frameElem.from_frame_to_otherFrame("rigthFrame") self.syslog.set_ip("172.16.10.11") self.syslog.set_ident("aa") self.syslog.save_button() self.cmf.click_login_msg_button() self.user_quit() self.login_sysaudit() self.switch_to_moudle(u"审计管理", u"配置审计") def system_log_post_condition(self): self.user_quit() self.login_sysadmin() self.del_user_data_module([49]) self.user_quit() #-----------------------------运维审计前置条件------------------------------ def audit_log_prefix_condition(self): self.login_and_switch_to_dep() self.add_user_data_module([43]) self.add_resource_modele([22]) self.add_res_account_module([20]) self.add_authorization_module([9]) self.switch_to_operation() self.sso_module([1]) self.user_quit() #新添加的运维管理员登录 self.sso_user_login(43) self.sso_module([1]) #新添加的运维管理员退出 self.user_quit() self.login_and_switch_to_sys() self.switch_to_moudle(u"审计管理", u"运维审计") def audit_log_post_condition(self): self.sys_switch_to_dep() self.del_authorization_module([9]) self.del_resource_modele([22]) self.del_user_data_module([43]) self.user_quit() #------------------------------命令单点登录前置条件---------------------------- u'''单点登录前置条件''' def sso_prefix_condition(self): self.login_and_switch_to_dep() self.add_resource_modele([1, 3, 4, 5]) self.add_res_account_module([1, 2, 4, 5, 6, 7]) self.add_authorization_module([1]) self.switch_to_operation() #self.user_quit() #self.login_and_switch_to_common() u'''单点登录后置条件''' def sso_post_condition(self): self.user_quit() self.login_and_switch_to_dep() self.del_resource_modele([1, 3, 4, 5]) self.del_authorization_module([1]) self.user_quit() #------------------------------windows单点登录前置条件------------------------- u'''windows单点登录前置条件''' def windows_sso_prefix_condition(self): self.login_and_switch_to_sys() #配置认证方式 self.add_meth_method() self.add_user_data_module([42]) self.sys_switch_to_dep() #self.login_and_switch_to_dep() self.add_resource_modele([2, 7, 8]) self.add_res_account_module([3, 9, 10]) self.add_authorization_module([3, 4]) self.switch_to_operation() #self.user_quit() #self.login_and_switch_to_common() u'''单点登录后置条件''' def windows_sso_post_condition(self): self.user_quit() self.login_and_switch_to_dep() self.del_authorization_module([3, 4]) self.del_user_data_module([42]) self.del_resource_modele([8, 7, 2]) self.user_quit() #------------------------------数据库单点登录前置条件------------------------- u'''数据库单点登录前置条件''' def database_sso_prefix_condition(self): #使用公共用户登录系统 self.login_and_switch_to_sys() #添加应用发布 self.add_application([2]) #添加客户端 self.add_client_module([1, 2]) self.sys_switch_to_dep() self.add_database_res_module([1, 2, 3]) self.add_res_account_module([11, 12, 13]) self.add_authorization_module([5]) self.switch_to_operation() u'''数据库单点登录后置条件''' def database_sso_post_condition(self): self.user_quit() self.login_and_switch_to_dep() self.del_authorization_module([5]) self.del_resource_modele([19, 20, 21]) self.dep_switch_to_sys() self.del_application([2]) self.del_client_module([1, 2]) self.user_quit()
class RetimeRule(object): def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cnEn = cnEncode() self.acproval = Accapproval(driver) self.command = CommandRule(driver) self.log = log() u'''点击删除''' def click_bulkdel_retime(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC( "id", "delete_rule_time_resource") u'''选择默认动作 Parameters: - staut:0代表禁止登录,1代表允许登录 ''' def select_default_type(self, state): try: valu = self.cnEn.is_float(state) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "defaultType") self.selectElem.select_element_by_value(selem, valu) except Exception: print("Select default action failure") u'''点击运行状态''' def click_running_state(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "ruleState") u'''填写每月开始日期 Parameters: - starttime:每月的开始时间 ''' def set_month_start_time(self, starttime): valu = self.cnEn.is_float(starttime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortMonthStartTime") self.getElem.find_element_wait_and_sendkeys("id", "fortMonthStartTime", valu) u'''填写每月结束日期 Parameters: - endtime:每月的结束时间 ''' def set_month_end_time(self, endtime): valu = self.cnEn.is_float(endtime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortMonthEndTime") self.getElem.find_element_wait_and_sendkeys("id", "fortMonthEndTime", valu) u'''选择每周开始日期 Parameters: - starttime:每周的开始时间 ''' def set_week_start_time(self, starttime): valu = self.cnEn.is_float(starttime) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "fortWeekStartTime") self.selectElem.select_element_by_value(selem, valu) u'''选择每周结束日期 Parameters: - endtime:每周的结束时间 ''' def set_week_end_time(self, endtime): valu = self.cnEn.is_float(endtime) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "fortWeekEndTime") self.selectElem.select_element_by_value(selem, valu) u'''填写每天开始时间 Parameters: - starttime:每天的开始时间 ''' def set_day_start_time(self, starttime): valu = self.cnEn.is_float(starttime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortDayStartTime") self.getElem.find_element_wait_and_sendkeys("id", "fortDayStartTime", valu) u'''填写每天结束时间 Parameters: - endtime:每天的结束时间 ''' def set_day_end_time(self, endtime): valu = self.cnEn.is_float(endtime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortDayEndTime") self.getElem.find_element_wait_and_sendkeys("id", "fortDayEndTime", valu) u'''选择动作 Parameters: - staut:0代表禁止登录,1代表允许登录 ''' def select_action(self, state): valu = self.cnEn.is_float(state) self.frameElem.from_frame_to_otherFrame("rigthFrame") if valu == '1': self.getElem.find_element_wait_and_click_EC("id", "ruleTypePass") elif valu == '0': self.getElem.find_element_wait_and_click_EC("id", "ruleTypeDeny") u'''点击保存''' def click_save_retime(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "save_rule_time") u'''填写检索的资源名称 Parameters: - rename:资源名称 ''' def set_query_rename(self, rename): resname = self.cnEn.is_float(rename) self.frameElem.from_frame_to_otherFrame("artIframe") self.getElem.find_element_wait_and_clear_EC("id", "fortResourceName") self.getElem.find_element_wait_and_sendkeys("id", "fortResourceName", resname) u'''勾选某个资源 Parameters: - rename:资源名称 ''' def check_resource(self, rename): self.frameElem.from_frame_to_otherFrame("artIframe") self.set_query_rename(rename) self.command.click_check_resource() self.getElem.find_element_wait_and_click_EC("id", "resource_check_all") self.command.check_sure_button() u'''点击操作的公共方法 parameter: - value:序号 - statu:代表点击的操作,1代表勾选复选框;2代表上移;3代表下移;4代表插入;5代表编辑 ''' def click_option_method(self, value, status): self.frameElem.from_frame_to_otherFrame("rigthFrame") valu = self.cnEn.is_float(value) statu = self.cnEn.is_float(status) # 获取table对象 tableelem = self.getElem.find_element_with_wait_EC( "id", "content_table") # 获取table对象下的所有tr trelems = tableelem.find_elements_by_tag_name("tr") # 位于第几行 line = 0 # 循环所有tr for trelem in trelems: line += 1 # 找到tr下所有td对象 tds = trelem.find_elements_by_tag_name("td") # 获取td[2]的文本 tdtext = tds[1].text if tdtext == valu: #勾选复选框 if statu == '1': xpath = ".//*[@id='content_table']/tbody/tr[" + str( line) + "]/td[1]/input[1]" #上移 elif statu == '2': xpath = ".//*[@id='content_table']/tbody/tr[" + str( line) + "]/td[8]/a[1]" #下移 elif statu == '3': xpath = ".//*[@id='content_table']/tbody/tr[" + str( line) + "]/td[8]/a[2]" #插入 elif statu == '4': xpath = ".//*[@id='content_table']/tbody/tr[" + str( line) + "]/td[8]/a[3]" #编辑 elif statu == '5': xpath = ".//*[@id='content_table']/tbody/tr[" + str( line) + "]/td[8]/a[4]" self.getElem.find_element_wait_and_click_EC("xpath", xpath) break u'''校验资源时间规则结果 parameter: - data:数据集 ''' def check_resource_time_rule(self, data): self.frameElem.from_frame_to_otherFrame("rigthFrame") row = self.acproval.select_resoure_sso(data[1]) xpath = "//*[@id='content_table']/tbody/tr[" + str( row * 2) + "]/td/div/table/tbody/tr/td[2]/a[1]/img" isExsit = self.getElem.is_element_exsit("xpath", xpath) if isExsit == True: self.log.log_detail(data[0], True) else: self.log.log_detail(data[0], True)
class RetimeRule(object): def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cnEn = cnEncode() self.acproval = Accapproval(driver) self.command = CommandRule(driver) self.log = log() u'''点击删除''' def click_bulkdel_retime(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "delete_rule_time_resource") u'''选择默认动作 Parameters: - staut:0代表禁止登录,1代表允许登录 ''' def select_default_type(self, state): try: valu = self.cnEn.is_float(state) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "defaultType") self.selectElem.select_element_by_value(selem, valu) except Exception: print("Select default action failure") u'''点击运行状态''' def click_running_state(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "ruleState") u'''填写每月开始日期 Parameters: - starttime:每月的开始时间 ''' def set_month_start_time(self, starttime): valu = self.cnEn.is_float(starttime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortMonthStartTime") self.getElem.find_element_wait_and_sendkeys("id", "fortMonthStartTime", valu) u'''填写每月结束日期 Parameters: - endtime:每月的结束时间 ''' def set_month_end_time(self, endtime): valu = self.cnEn.is_float(endtime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortMonthEndTime") self.getElem.find_element_wait_and_sendkeys("id", "fortMonthEndTime", valu) u'''选择每周开始日期 Parameters: - starttime:每周的开始时间 ''' def set_week_start_time(self, starttime): valu = self.cnEn.is_float(starttime) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "fortWeekStartTime") self.selectElem.select_element_by_value(selem, valu) u'''选择每周结束日期 Parameters: - endtime:每周的结束时间 ''' def set_week_end_time(self, endtime): valu = self.cnEn.is_float(endtime) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "fortWeekEndTime") self.selectElem.select_element_by_value(selem, valu) u'''填写每天开始时间 Parameters: - starttime:每天的开始时间 ''' def set_day_start_time(self, starttime): valu = self.cnEn.is_float(starttime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortDayStartTime") self.getElem.find_element_wait_and_sendkeys("id", "fortDayStartTime", valu) u'''填写每天结束时间 Parameters: - endtime:每天的结束时间 ''' def set_day_end_time(self, endtime): valu = self.cnEn.is_float(endtime) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "fortDayEndTime") self.getElem.find_element_wait_and_sendkeys("id", "fortDayEndTime", valu) u'''选择动作 Parameters: - staut:0代表禁止登录,1代表允许登录 ''' def select_action(self, state): valu = self.cnEn.is_float(state) self.frameElem.from_frame_to_otherFrame("rigthFrame") if valu == '1': self.getElem.find_element_wait_and_click_EC("id", "ruleTypePass") elif valu == '0': self.getElem.find_element_wait_and_click_EC("id", "ruleTypeDeny") u'''点击保存''' def click_save_retime(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "save_rule_time") u'''填写检索的资源名称 Parameters: - rename:资源名称 ''' def set_query_rename(self, rename): resname = self.cnEn.is_float(rename) self.frameElem.from_frame_to_otherFrame("artIframe") self.getElem.find_element_wait_and_clear_EC("id", "fortResourceName") self.getElem.find_element_wait_and_sendkeys("id", "fortResourceName", resname) u'''勾选某个资源 Parameters: - rename:资源名称 ''' def check_resource(self, rename): self.frameElem.from_frame_to_otherFrame("artIframe") self.set_query_rename(rename) self.command.click_check_resource() self.getElem.find_element_wait_and_click_EC("id", "resource_check_all") self.command.check_sure_button() u'''点击操作的公共方法 parameter: - value:序号 - statu:代表点击的操作,1代表勾选复选框;2代表上移;3代表下移;4代表插入;5代表编辑 ''' def click_option_method(self, value, status): self.frameElem.from_frame_to_otherFrame("rigthFrame") valu = self.cnEn.is_float(value) statu = self.cnEn.is_float(status) # 获取table对象 tableelem = self.getElem.find_element_with_wait_EC("id", "content_table") # 获取table对象下的所有tr trelems = tableelem.find_elements_by_tag_name("tr") # 位于第几行 line = 0 # 循环所有tr for trelem in trelems: line += 1 # 找到tr下所有td对象 tds = trelem.find_elements_by_tag_name("td") # 获取td[2]的文本 tdtext = tds[1].text if tdtext == valu: #勾选复选框 if statu == '1': xpath = ".//*[@id='content_table']/tbody/tr[" + str(line) + "]/td[1]/input[1]" #上移 elif statu == '2': xpath = ".//*[@id='content_table']/tbody/tr[" + str(line) + "]/td[8]/a[1]" #下移 elif statu == '3': xpath = ".//*[@id='content_table']/tbody/tr[" + str(line) + "]/td[8]/a[2]" #插入 elif statu == '4': xpath = ".//*[@id='content_table']/tbody/tr[" + str(line) + "]/td[8]/a[3]" #编辑 elif statu == '5': xpath = ".//*[@id='content_table']/tbody/tr[" + str(line) + "]/td[8]/a[4]" self.getElem.find_element_wait_and_click_EC("xpath", xpath) break u'''校验资源时间规则结果 parameter: - data:数据集 ''' def check_resource_time_rule(self, data): self.frameElem.from_frame_to_otherFrame("rigthFrame") row = self.acproval.select_resoure_sso(data[1]) xpath = "//*[@id='content_table']/tbody/tr[" + str(row*2) + "]/td/div/table/tbody/tr/td[2]/a[1]/img" isExsit = self.getElem.is_element_exsit("xpath", xpath) if isExsit == True: self.log.log_detail(data[0], True) else: self.log.log_detail(data[0], True)
class testTime(object): def __init__(self, driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.getElem = getElement(driver) self.loginElem = loginPage(self.driver) u'''提示内容框元素路径''' def div_msg(self): div_msg = "html/body/div[1]/div/table/tbody/tr[2]/td[2]/div/table/tbody/tr[2]/td[2]/div" return div_msg u'''获取测试数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): dataFile = dataFileName() timerulPath = dataFile.get_timerule_test_data_url() timerulData = dataFile.get_data(timerulPath, sheetname) return timerulData u'''添加时间规则''' def add_time_rule_001(self): #日志开始记录 self.log.log_start("add_time_rule") #获取添加时间规则测试数据 timerulData = self.get_table_data("add_time_rule") #保存成功的弹出框 comrulMsg = self.div_msg() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_add_button() self.timerule.set_rulename((data[2])) self.timerule.select_depart(data[3]) self.timerule.start_date(data[4]) self.timerule.date_of_termination(data[6], data[7]) self.timerule.set_status_type(data[8]) self.timerule.set_time(data[9], data[10], data[11]) self.timerule.set_descrip(data[12]) self.timerule.click_save_time() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() self.comsuit.switch_to_moudle(u'运维管理', u'用户') self.timerule.edit_user_time_rule(data[13], data[14]) if dataRow != 5: self.comsuit.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(1) except Exception as e: print("add_time_rule fail:" + str(e)) self.comsuit.user_quit() self.log.log_end("add_time_rule") u'''添加时间规则结果''' def add_time_rule_result_002(self): #日志开始记录 self.log.log_start("add_time_rule_result") #获取添加时间规则测试数据 timerulData = self.get_table_data("add_time_rule") #保存成功的弹出框 comrulMsg = self.div_msg() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: list = [data[15], data[16], data[17], data[18], data[19]] self.loginElem.login(list) self.frameElem.from_frame_to_otherFrame("topFrame") if self.getElem.is_element_exsit('id', "logout"): self.comsuit.user_quit() else: self.cmf.click_login_msg_button() flag = True self.cmf.test_win_check_point("xpath", comrulMsg, list, flag) except Exception as e: print("add_time_rule_result fail:" + str(e)) self.comsuit.login_secadmin() self.comsuit.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(1) self.log.log_end("add_time_rule_result") u'''编辑时间规则''' def mod_time_rule_003(self): #日志开始记录 self.log.log_start("mod_time_rule") #获取编辑时间规则测试数据 timerulData = self.get_table_data("mod_time_rule") #保存成功的弹出框 comrulMsg = self.div_msg() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.timerule.click_edit_time(data[2]) self.timerule.set_rulename((data[3])) self.timerule.start_date(data[4]) self.timerule.date_of_termination(data[5], data[6]) self.timerule.set_status_type(data[7]) self.timerule.deselect_time(data[8], data[9], data[10]) self.timerule.set_time(data[11], data[12], data[13]) self.timerule.set_descrip(data[14]) self.timerule.click_save_time() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print("mod_time_rule fail:" + str(e)) self.log.log_end("mod_time_rule") u'''校验时间规则''' def check_time_rule_004(self): #日志开始记录 self.log.log_start("check_time_rule") #获取校验时间规则测试数据 timerulData = self.get_table_data("check_time_rule") #保存成功的弹出框 comrulMsg = self.div_msg() self.command.click_add_button() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow == 2 or dataRow == 3: self.timerule.set_rulename((data[2])) elif dataRow == 4: self.timerule.select_depart(data[3]) elif dataRow == 5: self.timerule.start_date(data[4], data[5]) elif dataRow == 6: self.timerule.date_of_termination(data[6], data[7]) elif dataRow == 7: self.timerule.start_date(data[4]) elif dataRow == 8 or dataRow == 9: self.timerule.set_time(data[8], data[9], data[10]) if dataRow != 0: self.timerule.click_save_time() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print("check_time_rule fail:" + str(e)) self.command.click_back_command() self.log.log_end("check_time_rule") u'''检索时间规则''' def query_time_rule_005(self): #日志开始记录 self.log.log_start("query_time_rule") #获取检索时间规则测试数据 timerulData = self.get_table_data("query_time_rule") for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.timerule.click_reset_time() if dataRow != 4: self.timerule.set_search_timename((data[1])) self.timerule.click_search_time() self.log.log_detail(data[0], True) except Exception as e: print("query_time_rule fail:" + str(e)) self.log.log_end("query_time_rule") u'''删除时间规则''' def del_time_rule_006(self): #日志开始记录 self.log.log_start("del_time_rule") #获取删除时间规则测试数据 timerulData = self.get_table_data("del_time_rule") #保存成功的弹出框 comrulMsg = self.div_msg() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if dataRow == 1: self.timerule.click_bulkdel_time() self.cmf.click_login_msg_button() self.log.log_detail(data[0], True) else: self.timerule.click_del_time(data[2]) self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.cmf.click_login_msg_button() except Exception as e: print("del_time_rule fail:" + str(e)) self.log.log_end("del_time_rule")
class testTime(object): def __init__(self,driver): self.driver = driver self.log = log() self.cmf = commonFun(driver) self.frameElem = frameElement(driver) self.testrole = testRole(driver) self.command = CommandRule(driver) self.comsuit = CommonSuiteData(driver) self.timerule = TimeRule(driver) self.getElem = getElement(driver) self.loginElem = loginPage(self.driver) u'''获取测试数据 Parameters: - sheetname:sheet名称 return:表格数据 ''' def get_table_data(self, sheetname): dataFile = dataFileName() timerulPath = dataFile.get_timerule_test_data_url() timerulData = dataFile.get_data(timerulPath, sheetname) return timerulData u'''添加时间规则''' def add_time_rule_001(self): #日志开始记录 self.log.log_start("add_time_rule") #获取添加时间规则测试数据 timerulData = self.get_table_data("add_time_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.command.click_add_button() self.timerule.set_rulename((data[2])) self.timerule.select_depart(data[3]) self.timerule.start_date(data[4]) self.timerule.date_of_termination(data[6], data[7]) self.timerule.set_status_type(data[8]) self.timerule.set_time(data[9], data[10], data[11]) self.timerule.set_descrip(data[12]) self.timerule.click_save_time() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() self.comsuit.switch_to_moudle(u'运维管理', u'用户') self.timerule.edit_user_time_rule(data[13], data[14]) if dataRow != 5: self.comsuit.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(1) except Exception as e: print ("add_time_rule fail:" + str(e)) self.comsuit.user_quit() self.log.log_end("add_time_rule") u'''添加时间规则结果''' def add_time_rule_result_002(self): #日志开始记录 self.log.log_start("add_time_rule_result") #获取添加时间规则测试数据 timerulData = self.get_table_data("add_time_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: list = [data[15], data[16], data[17], data[18], data[19]] self.loginElem.login(list) self.frameElem.from_frame_to_otherFrame("topFrame") if self.getElem.is_element_exsit('id', "logout"): self.comsuit.user_quit() else: self.cmf.click_login_msg_button() flag = True self.cmf.test_win_check_point("xpath", comrulMsg, list, flag) except Exception as e: print ("add_time_rule_result fail:" + str(e)) self.comsuit.login_and_switch_to_dep() self.comsuit.switch_to_moudle(u'运维管理', u'规则定义') self.command.click_left_rule(1) self.log.log_end("add_time_rule_result") u'''编辑时间规则''' def mod_time_rule_003(self): #日志开始记录 self.log.log_start("mod_time_rule") #获取编辑时间规则测试数据 timerulData = self.get_table_data("mod_time_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.timerule.click_edit_time(data[2]) self.timerule.set_rulename((data[3])) self.timerule.start_date(data[4]) self.timerule.date_of_termination(data[5], data[6]) self.timerule.set_status_type(data[7]) self.timerule.deselect_time(data[8], data[9], data[10]) self.timerule.set_time(data[11], data[12], data[13]) self.timerule.set_descrip(data[14]) self.timerule.click_save_time() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.command.click_back_command() except Exception as e: print ("mod_time_rule fail:" + str(e)) self.log.log_end("mod_time_rule") u'''校验时间规则''' def check_time_rule_004(self): #日志开始记录 self.log.log_start("check_time_rule") #获取校验时间规则测试数据 timerulData = self.get_table_data("check_time_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() self.command.click_add_button() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow == 2 or dataRow == 3: self.timerule.set_rulename((data[2])) elif dataRow == 4: self.timerule.select_depart(data[3]) elif dataRow == 5: self.timerule.start_date(data[4], data[5]) elif dataRow == 6: self.timerule.date_of_termination(data[6], data[7]) elif dataRow == 7: self.timerule.start_date(data[4]) elif dataRow == 8 or dataRow == 9: self.timerule.set_time(data[8], data[9], data[10]) if dataRow != 0: self.timerule.click_save_time() self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) except Exception as e: print ("check_time_rule fail:" + str(e)) self.command.click_back_command() self.log.log_end("check_time_rule") u'''检索时间规则''' def query_time_rule_005(self): #日志开始记录 self.log.log_start("query_time_rule") #获取检索时间规则测试数据 timerulData = self.get_table_data("query_time_rule") for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: self.timerule.click_reset_time() if dataRow != 4: self.timerule.set_search_timename((data[1])) self.timerule.click_search_time() self.log.log_detail(data[0], True) except Exception as e: print ("query_time_rule fail:" + str(e)) self.log.log_end("query_time_rule") u'''删除时间规则''' def del_time_rule_006(self): #日志开始记录 self.log.log_start("del_time_rule") #获取删除时间规则测试数据 timerulData = self.get_table_data("del_time_rule") #保存成功的弹出框 comrulMsg = self.testrole.popup() #无检查点的测试项标识,如果为True说明通过 flag = False for dataRow in range(len(timerulData)): data = timerulData[dataRow] try: #如果不是第一行标题,则读取数据 if dataRow != 0: if dataRow == 1: self.timerule.click_bulkdel_time() self.cmf.click_login_msg_button() self.log.log_detail(data[0],True) else: self.timerule.click_del_time(data[2]) self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", comrulMsg, data, flag) self.cmf.click_login_msg_button() except Exception as e: print ("del_time_rule fail:" + str(e)) self.log.log_end("del_time_rule")
class Backuprestore(object): def __init__(self, driver): self.driver = driver self.getElem = getElement(driver) self.selectElem = selectElement(driver) self.frameElem = frameElement(driver) self.cmf = commonFun(driver) self.cnEn = cnEncode() self.comsuit = CommonSuiteData(self.driver) self.command = CommandRule(self.driver) self.tableElem = tableElement(driver) self.log = log() self.userElem = UserPage(self.driver) self.role = Role(driver) u'''点击自动备份开关''' def auto_backup_switch(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "btn_qh") u'''勾选系统配置''' def check_sys_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") values = self.check_common() if values[0] == None: self.getElem.find_element_wait_and_click_EC("id", "configBackUp") if values[1] != None: self.getElem.find_element_wait_and_click_EC("id", "databaseBackUp") u'''勾选实体配置''' def check_entity_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") values = self.check_common() if values[0] != None: self.getElem.find_element_wait_and_click_EC("id", "configBackUp") if values[1] == None: self.getElem.find_element_wait_and_click_EC("id", "databaseBackUp") u'''勾选实体配置和系统配置''' def check_all_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") values = self.check_common() if values[0] == None: self.getElem.find_element_wait_and_click_EC("id", "configBackUp") if values[1] == None: self.getElem.find_element_wait_and_click_EC("id", "databaseBackUp") u'''勾选实体或者系统配置公共方法''' def check_common(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "configBackUp") value = selem.get_attribute('checked') selemdb = self.getElem.find_element_with_wait_EC("id", "databaseBackUp") valuedb = selemdb.get_attribute('checked') list = [value, valuedb] return list u'''勾选实体或者系统配置 parameter: - stauts:勾选配置信息1代表系统配置2代表实体配置,3代表系统配置和实体配置 ''' def check_config(self, stauts): staut = self.cnEn.is_float(stauts) if staut == '1': self.check_sys_config() elif staut == '2': self.check_entity_config() else: self.check_all_config() u'''选择备份方式 parameter: - stauts:value属性值,1代表一次性执行,2代表周期性执行 ''' def select_backup_mode(self, stauts): staut = self.cnEn.is_float(stauts) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "backUpType") self.selectElem.select_element_by_value(selem, staut) u'''选择执行小时 parameter: - stauts:value属性值 ''' def select_hour(self, stauts): staut = self.cnEn.is_float(stauts) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "startHour") self.selectElem.select_element_by_value(selem, staut) u'''填写分钟 parameter: - minute:分钟 ''' def set_minute(self, minute): minu = self.cnEn.is_float(minute) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "startMinute") self.getElem.find_element_wait_and_sendkeys("id", "startMinute", minu) u'''选择执行方式 parameter: - staut:0代表按天,1代表按周,2代表按月,3代表按年 ''' def select_execu_mode(self, staut): self.frameElem.from_frame_to_otherFrame("rigthFrame") if staut == 0: self.getElem.find_element_wait_and_click_EC("id", "dayradio") elif staut == 1: self.getElem.find_element_wait_and_click_EC("id", "weekradio") elif staut == 2: self.getElem.find_element_wait_and_click_EC("id", "monthRadio") else: self.getElem.find_element_wait_and_click_EC("id", "yearRadio") u'''选择存储位置 parameter: - stauts:value属性值1代表本地备份2代表ftp备份 ''' def select_storage_location(self, stauts): staut = self.cnEn.is_float(stauts) self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "backUpLocation") self.selectElem.select_element_by_value(selem, staut) u'''填写远程路径 parameter: - path:远程路径 ''' def set_remote_path(self, path): pat = self.cnEn.is_float(path) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "path") self.getElem.find_element_wait_and_sendkeys("id", "path", pat) u'''填写服务器IP parameter: - ip:服务器IP ''' def set_ftpip(self, ip): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "ip") self.getElem.find_element_wait_and_sendkeys("id", "ip", ip) u'''填写连接用户名 parameter: - minute:连接用户名 ''' def set_name(self, name): nam = self.cnEn.is_float(name) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "username") self.getElem.find_element_wait_and_sendkeys("id", "username", nam) u'''填写连接口令 parameter: - password:连接口令 ''' def set_password(self, password): pwd = self.cnEn.is_float(password) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "password") self.getElem.find_element_wait_and_sendkeys("id", "password", pwd) u'''填写确认口令 parameter: - minute:分钟 ''' def set_password_again(self, password): pwd = self.cnEn.is_float(password) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "passwordAgain") self.getElem.find_element_wait_and_sendkeys("id", "passwordAgain", pwd) u'''点击立刻备份''' def click_backup_immediately(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "back_up_now") u'''点击保存''' def click_save(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "back_up_save") u'''选择系统备份还原或者查看备份文件 parameter: - staut:0代表系统备份还原,1代表查看备份文件 ''' def select_backup_menu(self, staut): self.frameElem.from_frame_to_otherFrame("rigthFrame") if staut == 0: self.getElem.find_element_wait_and_click_EC("id", "tit1") elif staut == 1: self.getElem.find_element_wait_and_click_EC("id", "tit2") u'''点击操作列操作 Parameters: - filename:文件名称 - value:1代表下载,2代表删除,3代表还原 ''' def click_operat_file(self,filename, value): self.frameElem.from_frame_to_otherFrame("rigthFrame") row = 1 selems = self.driver.find_elements_by_name("file") for selem in selems: idvalue = selem.get_attribute('id') row = row +1 if idvalue == filename: xpath = ".//*[@id='content_rt02']/div/table/tbody/tr[" + str(row) + "]/td[7]/input[" + str(value) + "]" self.getElem.find_element_wait_and_click_EC("xpath", xpath) time.sleep(1) u'''下载上传完成后点击操作列操作 Parameters: - filename:文件名称 - value:1代表下载,2代表删除,3代表还原 ''' def upload_click_operat_file(self,filename, value): self.frameElem.from_frame_to_otherFrame("rigthFrame") row = 1 filenames = ""+filename[:-6] + ""+filename+"" selems = self.driver.find_elements_by_name("file") for selem in selems: idvalue = selem.get_attribute('id') row = row +1 if idvalue == filename or idvalue == filenames: xpath = ".//*[@id='content_rt02']/div/table/tbody/tr[" + str(row) + "]/td[7]/input[" + str(value) + "]" self.getElem.find_element_wait_and_click_EC("xpath", xpath) time.sleep(1) u'''点击还原系统配置''' def click_restore_sys_config(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "deleConfig1") u'''点击清空数据库''' def click_reset_database(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "resetDataBase1") u'''点击清空数据库''' def click_reset_audit(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "delAuditFile1") u'''填写syslogip parameter: - syslogip:syslogip ''' def set_syslogip(self, syslogip): ip = self.cnEn.is_float(syslogip) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "host") self.getElem.find_element_wait_and_sendkeys("id", "host", ip) u'''填写syslog端口 parameter: - port:syslog端口 ''' def set_port(self, port): sysport = self.cnEn.is_float(port) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_clear_EC("id", "port") self.getElem.find_element_wait_and_sendkeys("id", "port", sysport) u'''点击syslog保存''' def click_syslog_save(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "save_syslog") u'''获取syslogip值''' def get_syslog_port(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("id", "port") value = selem.get_attribute("value") return value u'''获取文件名称''' def get_file_name(self): self.frameElem.from_frame_to_otherFrame("rigthFrame") selem = self.getElem.find_element_with_wait_EC("xpath", ".//*[@id='content_rt02']/div/table/tbody/tr[2]") value = selem.get_attribute('id') return value u'''编辑syslog parameter: - ip:syslogip - port:端口 ''' def set_syslog(self, port, ip='no'): self.comsuit.switch_to_moudle(u'系统配置', u'关联服务') self.command.click_left_rule(1) if ip != 'no': self.set_syslogip(ip) self.set_port(port) self.click_syslog_save() self.frameElem.switch_to_content() self.cmf.click_msg_button(1) u'''检验syslog端口是否为备份之前信息 parameter: - port:端口 - checklog:检验信息 ''' def check_syslog_content(self, port, checklog): self.comsuit.switch_to_moudle(u'系统配置', u'关联服务') self.command.click_left_rule(1) elemText = self.get_syslog_port() strdata3 = self.cnEn.is_float(port) if elemText == strdata3: self.log.log_detail(checklog, True) else: self.log.log_detail(checklog, False) u'''校验用户或者角色信息 Parameters: - namevalue:传入的要被查询名称 - name:表格列的name属性 - checklog:日志信息 return:定位该名称位于第几行 ''' def check_content(self,namevalue, name, checklog): row = self.cmf.find_row_by_name(namevalue, name) if row != 0: self.log.log_detail(checklog, True) else: self.log.log_detail(checklog, False) u'''填写用户信息 parameters: account : 用户账号 name : 用户名称 pwd : 用户密码 agpwd : 确认密码 ''' def set_user_info(self, account, name, pwd, agpwd): self.comsuit.switch_to_moudle(u"运维管理", u"用户") self.frameElem.from_frame_to_otherFrame("mainFrame") self.userElem.add_button() self.userElem.set_user_account(account) self.userElem.set_user_name(name) self.userElem.set_user_pwd(pwd) self.userElem.set_user_enquire_pwd(agpwd) self.userElem.save_button() self.frameElem.switch_to_content() self.cmf.click_login_msg_button() u'''点击用户操作列对应的删除按钮 parameters: - account : 用户账号 ''' def del_user_info(self, account): self.comsuit.switch_to_moudle(u"运维管理", u"用户") self.frameElem.from_frame_to_otherFrame("mainFrame") self.userElem.operate_delete(account) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) u'''点击备份还原配置文件的删除 parameters: - filename : 文件名称 - loginfo : 日志信息 ''' def del_backup_file(self, filename, loginfo): self.click_operat_file(filename, 2) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) time.sleep(1) self.log.log_detail(loginfo, True) u'''点击角色操作列对应的删除按钮 parameters: - rolename : 角色名称 ''' def del_role_info(self, rolename): self.comsuit.switch_to_moudle(u"角色管理", u"角色定义") self.frameElem.from_frame_to_otherFrame("mainFrame") self.role.delete(rolename) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) u'''执行还原操作 parameters: - filename :执行还原的文件名称 - loginfo :日志信息 - stauts :状态1代表执行操作列按钮2代表进行上传后操作列按钮 ''' def execute_restore(self, filename, loginfo, stauts=1): self.comsuit.switch_to_moudle(u'系统配置', u'备份还原') self.command.click_left_rule(0) self.select_backup_menu(1) if stauts == 1: self.click_operat_file(filename, 3) elif stauts == 2: self.upload_click_operat_file(filename, 3) time.sleep(5) self.frameElem.switch_to_content() self.getElem.find_element_with_wait_EC("classname", "aui_state_highlight") time.sleep(3) self.cmf.click_msg_button(1) self.log.log_detail(loginfo, True) u'''配置备份信息 parameters: - data :数据文件集 - backMsg :保存成功的弹出框信息 - flag :无检查点的测试项标识,如果为True说明通过 ''' def config_backup(self, data, backMsg, flag): self.comsuit.switch_to_moudle(u'系统配置', u'备份还原') self.command.click_left_rule(0) self.check_config(data[12]) self.select_backup_mode(data[4]) self.backup_time(data[5], data[6]) self.select_storage_location(data[7]) self.click_save() time.sleep(3) self.frameElem.switch_to_content() self.cmf.test_win_check_point("xpath", backMsg, data, flag) self.click_backup_immediately() time.sleep(2) self.frameElem.switch_to_content() self.cmf.click_msg_button(1) self.log.log_detail(data[9], True) self.select_backup_menu(1) u'''填写角色信息 Parameters: - rolename :角色名称 - shortname :名称简写 ''' def set_role_info(self, rolename, shortname): self.comsuit.switch_to_moudle(u"角色管理", u"角色定义") self.frameElem.from_frame_to_otherFrame("mainFrame") self.role.add() self.role.edit_rolename(rolename) self.role.edit_shortname(shortname) self.role.select_sysrole() self.role.save_button() self.frameElem.switch_to_content() self.cmf.click_msg_button(1) u'''执行日期 Parameters: - type :t代表今天,c代表clear,q代表确定,默认选择今天 - backuptime :执行日期设定的日期,格式为2016-9-7 11:42:42 ''' def backup_time(self, types, backuptime): self.frameElem.from_frame_to_otherFrame("rigthFrame") # 时间控件的fram的xpath fxpath = "//iframe[@hidefocus='true']" # 日期控件table的xpath路径 txpath = "/html/body/div/div[3]/table" status = self.cnEn.is_float('1') type = self.cnEn.is_float(types) # 转成datetime对象 date = datetime(*xldate_as_tuple(backuptime, 0)) end = date.strftime('%Y-%m-%d %H:%M:%S') self.option_time("backUpTime", fxpath, status, type, txpath, end) u'''操作时间控件 Parameters: - wdateId:日期控件input控件的ID值 - fxpath:日期控件frame的xpath路径 - status: 日期控件是否有时分秒 - txpath:日期控件table的xpath路径 - time:设定的日期,格式为2016-9-7 11:42:42 - type:t代表今天,c代表clear,q代表确定,默认选择今天 ''' def option_time(self,wdateId,fxpath,status='0',type='t',txpath = None,dtime = None): self.getElem.find_element_wait_and_click("id",wdateId) frame = self.driver.find_element_by_xpath(fxpath) self.driver.switch_to_frame(frame) if type == 't': self.getElem.find_element_wait_and_click("id","dpTodayInput") elif type == 'c': self.getElem.find_element_wait_and_click("id","dpClearInput") elif type == 'q': if dtime is not None: list = dtime.split() ymdList = list[0].split("-") hmsList = list[1].split(":") #年 tYear = ymdList[0] #月 tMon = ymdList[1] #日 tDay = ymdList[2] #时 tHour = hmsList[0] #分 tMin = hmsList[1] #秒 tSen = hmsList[2] dTitle = self.getElem.find_element_with_wait("id","dpTitle").find_elements_by_tag_name("input") #设定月 dTitle[0].clear() dTitle[0].send_keys(tMon) #设定年 dTitle[1].clear() dTitle[1].send_keys(tYear) self.frameElem.from_frame_to_otherFrame("rigthFrame") self.getElem.find_element_wait_and_click_EC("id", "backUpTime") self.driver.switch_to_frame(frame) if txpath is not None: iStatus = False for itr in range(7): if itr != 0: for itd in range(7): ct = self.tableElem.get_table_cell_text(txpath,itr,itd)[0] #排除第一行大于7的 if itr == 1 and int(ct) > 7: continue #排除倒数第二行小于15的 if itr == 5 and int(ct) < 15: continue #排除最后一行小于15的 if itr == 6 and int(ct) < 15: continue #如果跟给定的日期一致,点击日期 if int(ct) == int(tDay): self.tableElem.get_table_cell_text(txpath,itr,itd)[1].click() iStatus = True break #找到日期后跳出循环 if iStatus: break #日期控件是否有时分秒 if status == '1': dTime = self.getElem.find_element_with_wait("id","dpTime").find_elements_by_tag_name("input") #设定小时 dTime[0].clear() dTime[0].send_keys(tHour) #设定分钟 dTime[2].clear() dTime[2].send_keys(tMin) #设定秒 dTime[4].clear() dTime[4].send_keys(tSen) self.getElem.find_element_wait_and_click("id","dpOkInput") u'''上传操作 parameters: - filename :执行还原的文件名称 - loginfo :日志信息 ''' def backup_file_upload(self, filename, loginfo): self.frameElem.from_frame_to_otherFrame("rigthFrame") value = "C:\Users\Administrator\Downloads\\" + filename+"" self.getElem.find_element_wait_and_sendkeys("id", "backUpFile", value) time.sleep(2) self.getElem.find_element_wait_and_click_EC("id", "up_file") self.frameElem.switch_to_content() self.cmf.click_msg_button(1) time.sleep(1) self.log.log_detail(loginfo, True)