def test_basic_start_protocol():
"""Verify basic arguments are passed correctly for getting run statistics."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=sequencing_position.port),
),
]
with ManagerTestServer(positions=test_positions) as server:
# No position supplied
assert run_extract_run_statistics_example(server.port, [])[0] == 2
# No protocols available
assert (run_extract_run_statistics_example(server.port, [
"--position",
position_info.position_name,
])[0] == 1)
# No acquisitions in protocol
sequencing_position.set_protocol_runs([TEST_PROTOCOL])
assert (run_extract_run_statistics_example(server.port, [
"--position",
position_info.position_name,
])[0] == 1)
# Everything in place - should generate a valid report
sequencing_position.set_protocol_runs(
[TEST_PROTOCOL_WITH_ACQUISTIIONS])
sequencing_position.set_acquisition_runs([TEST_ACQUISITION])
sequencing_position.set_acquisition_output_statistics(
TEST_ACQUISITION.run_id, TEST_ACQUISITION_OUTPUT_STATS)
assert (run_extract_run_statistics_example(server.port, [
"--position",
position_info.position_name,
])[0] == 0)
expected_report = """Acquisition report
==================
Output snapshots for barcode: barcode1234, lamp_barcode_id: unclassified, lamp_target_id: unclassified, alignment_reference: unaligned
--------------------------------------------------------------------------------------------------------------------------------------
Timestamp(s)\tPassed Called reads\tFailed Reads\tBasecalled samples
60\t600\t0\t0
"""
expected_output_path = Path("acquisition_output_%s.md" %
TEST_ACQUISITION.run_id)
assert expected_output_path.exists()
assert expected_output_path.read_text() == expected_report
def test_naming_start_protocol():
"""Verify naming experiments works as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=0, insecure=sequencing_position.port
),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
sequencing_position.set_protocol_list([TEST_PROTOCOL])
# Position argument supplied should work...
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--sample-id",
"my-sample-id",
"--experiment-group",
"my-experiment-group",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 1
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.user_info.sample_id.value == "my-sample-id"
assert protocol.user_info.protocol_group_id.value == "my-experiment-group"
assert protocol.args == [
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
def test_basic_start_protocol():
"""Verify basic arguments are passed correctly for starting protocols."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=0, insecure=sequencing_position.port
),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Missing kit argument
assert run_start_protocol_example(server.port, [])[0] == 2
# Missing position/flow cell argument
assert (
run_start_protocol_example(server.port, ["--kit", TEST_KIT_NAME,])[0]
== 1
)
# No flow cell
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=False, flow_cell_id="")
)
assert (
run_start_protocol_example(
server.port,
["--kit", TEST_KIT_NAME, "--position", position_info.position_name],
)[0]
== 1
)
# Flow cell inserted
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
# No protocols available
assert (
run_start_protocol_example(
server.port,
["--kit", TEST_KIT_NAME, "--position", position_info.position_name],
)[0]
== 1
)
# Protocols available
sequencing_position.set_protocol_list([TEST_PROTOCOL])
# Position argument supplied should work...
assert (
run_start_protocol_example(
server.port,
["--kit", TEST_KIT_NAME, "--position", position_info.position_name],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 1
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.user_info.sample_id.value == ""
assert protocol.user_info.protocol_group_id.value == ""
assert protocol.args == [
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
assert (
run_start_protocol_example(
server.port,
["--kit", TEST_KIT_NAME, "--flow-cell-id", test_flow_cell_id],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 2
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.user_info.sample_id.value == ""
assert protocol.user_info.protocol_group_id.value == ""
assert protocol.args == [
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
def test_output_start_protocol():
"""Verify output options work as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=0, insecure=sequencing_position.port
),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
sequencing_position.set_protocol_list([TEST_PROTOCOL])
# Fastq
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--fastq",
"--fastq-reads-per-file",
"5000",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 1
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.user_info.sample_id.value == ""
assert protocol.user_info.protocol_group_id.value == ""
assert protocol.args == [
"--experiment_time=72",
"--fast5=off",
"--fastq=on",
"--fastq_data",
"compress",
"--fastq_reads_per_file=5000",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
# Fast5
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--fast5",
"--fast5-reads-per-file",
"501",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 2
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.user_info.sample_id.value == ""
assert protocol.user_info.protocol_group_id.value == ""
assert protocol.args == [
"--experiment_time=72",
"--fast5=on",
"--fast5_data",
"trace_table",
"fastq",
"raw",
"vbz_compress",
"--fast5_reads_per_file=501",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
# BAM
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--bam",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 3
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.user_info.sample_id.value == ""
assert protocol.user_info.protocol_group_id.value == ""
assert protocol.args == [
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=on",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
def test_alignment_start_protocol():
"""Verify basecalling alignment arguments work as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=0, insecure=sequencing_position.port
),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
sequencing_position.set_protocol_list(
[TEST_PROTOCOL, TEST_BARCODING_PROTOCOL]
)
alignment_ref = "foo.fasta"
bed_file = "bar.bed"
# Basecalling not enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--alignment-reference",
alignment_ref,
],
)[0]
== 1
)
# Alignment not enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--bed-file",
bed_file,
],
)[0]
== 1
)
# Alignment with basecalling enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--basecalling",
"--alignment-reference",
alignment_ref,
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 1
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.args == [
"--base_calling=on",
"--alignment",
"reference_files=['foo.fasta',]",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
# Alignment with bed file
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--basecalling",
"--alignment-reference",
alignment_ref,
"--bed-file",
bed_file,
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 2
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.args == [
"--base_calling=on",
"--alignment",
"reference_files=['foo.fasta',]",
"bed_file='bar.bed'",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
def test_barcoding_start_protocol():
"""Verify basecalling barcoding arguments work as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=0, insecure=sequencing_position.port
),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
sequencing_position.set_protocol_list(
[TEST_PROTOCOL, TEST_BARCODING_PROTOCOL]
)
# Basecalling not enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--barcoding",
],
)[0]
== 1
)
# Barcoding with basecalling enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--basecalling",
"--barcoding",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 1
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.args == [
"--base_calling=on",
"--barcoding",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
# Barcoding with all options
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--basecalling",
"--barcoding",
"--barcode-kits",
TEST_BARCODING_KIT,
"--trim-barcodes",
"--barcodes-both-ends",
"--detect-mid-strand-barcodes",
"--min-score",
"5",
"--min-score-rear",
"6",
"--min-score-mid",
"7",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 2
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.args == [
"--base_calling=on",
"--barcoding",
"barcoding_kits=['foo-barcodes',]",
"trim_barcodes=on",
"require_barcodes_both_ends=on",
"detect_mid_strand_barcodes=on",
"min_score=5.0",
"min_score_rear=6.0",
"min_score_mid=7.0",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
def test_basecalling_start_protocol():
"""Verify basecalling arguments work as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=0, insecure=sequencing_position.port
),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True, flow_cell_id=test_flow_cell_id)
)
sequencing_position.set_protocol_list([TEST_PROTOCOL])
# Basecalling enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--basecalling",
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 1
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.args == [
"--base_calling=on",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
# Basecalling enabled
assert (
run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--basecalling",
"--basecall-config",
TEST_BASECLL_MODEL_OTHER,
],
)[0]
== 0
)
assert len(sequencing_position.protocol_service.started_protocols) == 2
protocol = sequencing_position.protocol_service.started_protocols[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
assert protocol.args == [
"--base_calling=on",
"--guppy_filename=%s" % TEST_BASECLL_MODEL_OTHER,
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux-scan-period=1.5",
]
def test_read_until_start_protocol():
"""Verify read until arguments work as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=sequencing_position.port),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True,
flow_cell_id=test_flow_cell_id))
sequencing_position.set_protocol_list([TEST_PROTOCOL])
# Running without filter type:
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--read-until-reference",
"test.fasta",
"--read-until-bed-file",
"test.bed",
],
)[0] != 0)
# Running without reference file:
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--read-until-bed-file",
"test.bed",
"--read-until-filter",
"enrich",
],
)[0] != 0)
# Incorrect filter type
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--read-until-reference",
"test.fasta",
"--read-until-bed-file",
"test.bed",
"--read-until-filter",
"foo",
],
)[0] != 0)
# Read until enabled
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--position",
position_info.position_name,
"--read-until-reference",
"test.fasta",
"--read-until-bed-file",
"test.bed",
"--read-until-filter",
"deplete",
],
)[0] == 0)
assert len(sequencing_position.protocol_service.protocol_runs) == 1
protocol = sequencing_position.protocol_service.protocol_runs[-1]
assert protocol.identifier == TEST_PROTOCOL_IDENTIFIER
print(protocol.args)
assert protocol.args == [
"--read_until",
"filter_type=deplete",
"reference_files=['test.fasta',]",
"bed_file='test.bed'",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux_scan_period=1.5",
]
def test_sample_sheet_start_protocol():
"""Verify that the `--sample-sheet` argument works as expected."""
"""Verify basecalling barcoding arguments work as expected."""
position_info = PositionInfo(position_name="MN00000")
with SequencingPositionTestServer(position_info) as sequencing_position:
test_positions = [
manager_pb2.FlowCellPosition(
name=position_info.position_name,
state=manager_pb2.FlowCellPosition.State.STATE_RUNNING,
rpc_ports=manager_pb2.FlowCellPosition.RpcPorts(
secure=sequencing_position.port),
),
]
with ManagerTestServer(positions=test_positions) as server:
# Setup for experiment
test_flow_cell_id = "foo-bar-flow-cell"
sequencing_position.set_flow_cell_info(
FlowCellInfo(has_flow_cell=True,
flow_cell_id=test_flow_cell_id))
sequencing_position.set_protocol_list(
[TEST_PROTOCOL, TEST_BARCODING_PROTOCOL])
# Sample sheet specifies position_id
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--sample-sheet",
sample_sheet_csv_path(
"good", "start_protocol_test_with_position_id"),
"--basecalling",
"--barcoding",
"--barcode-kits",
TEST_BARCODING_KIT,
"--trim-barcodes",
"--barcodes-both-ends",
"--detect-mid-strand-barcodes",
"--min-score",
"5",
"--min-score-rear",
"6",
"--min-score-mid",
"7",
],
)[0] == 0)
assert len(sequencing_position.protocol_service.protocol_runs) == 1
protocol = sequencing_position.protocol_service.protocol_runs[-1]
assert protocol.user_info.sample_id.value == "my_sample"
assert protocol.user_info.protocol_group_id.value == "my_experiment"
assert protocol.args == [
"--base_calling=on",
"--barcoding",
"barcoding_kits=['foo-barcodes',]",
"trim_barcodes=on",
"require_barcodes_both_ends=on",
"detect_mid_strand_barcodes=on",
"min_score=5.0",
"min_score_rear=6.0",
"min_score_mid=7.0",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux_scan_period=1.5",
]
# Get the sorted barcode user info
actual_barcode_user_info = [
el for el in protocol.user_info.barcode_user_info
]
def barcode_user_info_key(el):
return el.barcode_name, el.lamp_barcode_id
actual_barcode_user_info = sorted(actual_barcode_user_info,
key=barcode_user_info_key)
# Make the expected values
expected_barcode_user_info = [
BarcodeUserData(
barcode_name="barcode01",
alias="alias01",
type=BarcodeUserData.SampleType.test_sample,
),
BarcodeUserData(
barcode_name="barcode02",
alias="alias02",
type=BarcodeUserData.SampleType.positive_control,
),
]
assert actual_barcode_user_info == expected_barcode_user_info
# Sample sheet specifies flow_cell_id
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--sample-sheet",
sample_sheet_csv_path(
"good", "start_protocol_test_with_flow_cell_id"),
"--sample-id",
"my_sample_2",
"--experiment-group",
"my_experiment_2",
"--basecalling",
"--barcoding",
"--barcode-kits",
TEST_BARCODING_KIT,
"--trim-barcodes",
"--barcodes-both-ends",
"--detect-mid-strand-barcodes",
"--min-score",
"5",
"--min-score-rear",
"6",
"--min-score-mid",
"7",
],
)[0] == 0)
assert len(sequencing_position.protocol_service.protocol_runs) == 2
protocol = sequencing_position.protocol_service.protocol_runs[-1]
assert protocol.user_info.sample_id.value == "my_sample_2"
assert protocol.user_info.protocol_group_id.value == "my_experiment_2"
assert protocol.args == [
"--base_calling=on",
"--barcoding",
"barcoding_kits=['foo-barcodes',]",
"trim_barcodes=on",
"require_barcodes_both_ends=on",
"detect_mid_strand_barcodes=on",
"min_score=5.0",
"min_score_rear=6.0",
"min_score_mid=7.0",
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux_scan_period=1.5",
]
# Get the sorted barcode user info
actual_barcode_user_info = [
el for el in protocol.user_info.barcode_user_info
]
def barcode_user_info_key(el):
return el.barcode_name, el.lamp_barcode_id
actual_barcode_user_info = sorted(actual_barcode_user_info,
key=barcode_user_info_key)
# Make the expected values
expected_barcode_user_info = [
BarcodeUserData(
barcode_name="barcode03",
alias="alias03",
type=BarcodeUserData.SampleType.negative_control,
),
BarcodeUserData(
barcode_name="barcode04",
alias="alias04",
type=BarcodeUserData.SampleType.no_template_control,
),
]
assert actual_barcode_user_info == expected_barcode_user_info
# Sample sheet specifies experiment_id; command line specifies sample_id
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--sample-sheet",
sample_sheet_csv_path("good",
"start_protocol_test_no_sample_id"),
"--sample-id",
"my_command_line_sample",
],
)[0] == 0)
assert len(sequencing_position.protocol_service.protocol_runs) == 3
protocol = sequencing_position.protocol_service.protocol_runs[-1]
assert protocol.user_info.sample_id.value == "my_command_line_sample"
assert (protocol.user_info.protocol_group_id.value ==
"my_sample_sheet_experiment")
assert protocol.args == [
"--experiment_time=72",
"--fast5=off",
"--fastq=off",
"--bam=off",
"--active_channel_selection=on",
"--mux_scan_period=1.5",
]
# Get the sorted barcode user info
actual_barcode_user_info = [
el for el in protocol.user_info.barcode_user_info
]
assert actual_barcode_user_info == []
# sample_id specified on command line conflicts with that in sample sheet
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--sample-sheet",
sample_sheet_csv_path(
"good", "start_protocol_test_with_flow_cell_id"),
"--sample-id",
"wrong_sample_id",
"--basecalling",
"--barcoding",
"--barcode-kits",
TEST_BARCODING_KIT,
"--trim-barcodes",
"--barcodes-both-ends",
"--detect-mid-strand-barcodes",
"--min-score",
"5",
"--min-score-rear",
"6",
"--min-score-mid",
"7",
],
)[0] == 1)
assert (run_start_protocol_example(
server.port,
[
"--kit",
TEST_KIT_NAME,
"--sample-sheet",
sample_sheet_csv_path(
"good", "start_protocol_test_with_flow_cell_id"),
"--experiment-group",
"wrong_experiment_id",
"--basecalling",
"--barcoding",
"--barcode-kits",
TEST_BARCODING_KIT,
"--trim-barcodes",
"--barcodes-both-ends",
"--detect-mid-strand-barcodes",
"--min-score",
"5",
"--min-score-rear",
"6",
"--min-score-mid",
"7",
],
)[0] == 1)