Exemplo n.º 1
0
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')

    if not run_clients:
        # don't run clients if --norun option is set
        return

    inventory = Inventory()
    clients = inventory.clients

    start = time.time()

    log_event('starting.clients')
    start_clients(clients=clients, req_num_peers=req_peer, impls=impls, enable_mining=enable_mining)
    log_event('starting.clients.done')

    print 'let it run for %d secs...' % scenario_run_time
    time.sleep(scenario_run_time)

    if stop_clients_at_scenario_end:
        log_event('stopping_clients')
        stop_clients(clients=clients, impls=impls)
        log_event('stopping_clients.done')

    global offset
    offset += time.time() - start
    print "Total offset: %ss" % offset
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')

    if not run_clients:
        # don't run clients if --norun option is set
        return

    inventory = Inventory()
    clients = inventory.clients

    start = time.time()

    log_event('starting.clients')
    start_clients(clients=clients, impls=impls, enable_mining=True)
    log_event('starting.clients.done')

    print 'let it run for %d secs...' % scenario_run_time_s
    time.sleep(scenario_run_time_s)

    log_event('stopping_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stopping_clients.done')

    global max_time_to_reach_consensus
    consensus_start = time.time()

    # start all clients without mining
    log_event('start_all_clients_again')
    start_clients(clients=clients, impls=impls, enable_mining=False)
    log_event('start_all_clients_again.done')

    # let them agree on a block
    log_event('wait_for_consensus')
    time.sleep(max_time_to_reach_consensus)
    log_event('wait_for_consensus.done')

    # stop all clients
    log_event('stop_all_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stop_all_clients.done')

    global offset
    offset += time.time() - start
    max_time_to_reach_consensus += time.time() - consensus_start

    print "Total offset: %ss" % offset
    print "Consensus offset: %ss" % max_time_to_reach_consensus
Exemplo n.º 3
0
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')

    if not run_clients:
        # don't run clients if --norun option is set
        return

    inventory = Inventory()
    clients = inventory.clients

    start = time.time()

    log_event('starting.clients')
    start_clients(clients=clients, impls=impls, enable_mining=True)
    log_event('starting.clients.done')

    print 'let it run for %d secs...' % scenario_run_time_s
    time.sleep(scenario_run_time_s)

    log_event('stopping_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stopping_clients.done')

    global max_time_to_reach_consensus
    consensus_start = time.time()

    # start all clients without mining
    log_event('start_all_clients_again')
    start_clients(clients=clients, impls=impls, enable_mining=False)
    log_event('start_all_clients_again.done')

    # let them agree on a block
    log_event('wait_for_consensus')
    time.sleep(max_time_to_reach_consensus)
    log_event('wait_for_consensus.done')

    # stop all clients
    log_event('stop_all_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stop_all_clients.done')

    global offset
    offset += time.time() - start
    max_time_to_reach_consensus += time.time() - consensus_start

    print "Total offset: %ss" % offset
    print "Consensus offset: %ss" % max_time_to_reach_consensus
Exemplo n.º 4
0
def run(run_clients, on_testnet):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')
    if not run_clients:
        return

    inventory = Inventory()
    clients = list(inventory.clients)

    fillnode = clients.pop()

    len_clients = len(clients)
    total_txs = txs_per_client * len_clients

    log_event('starting.clients')
    start_clients(clients=clients,
                  enable_mining=not on_testnet,
                  testnet=on_testnet)
    log_event('starting.clients.done')

    # Fill testnodes with ether
    log_event('filling.clients')
    filler_privkey = "c85ef7d79691fe79573b1a7064c19c1a9819ebdbd1faaab1a8ec92344438aaf4"
    start_clients(clients=[fillnode],
                  enable_mining=False,
                  privkey=filler_privkey,
                  testnet=on_testnet)
    if on_testnet:
        time.sleep(time_to_sync_on_testnet)
    else:
        time.sleep(15)
    rpc_host = inventory.clients[fillnode]
    rpc_port = 8545  # hard coded FIXME if we get multiple clients per ec
    endpoint = 'http://%s:%d' % (rpc_host, rpc_port)
    sender = "0xcd2a3d9f938e13cd947ec05abc7fe734df8dd826"
    fill_successful = 0
    for client in clients:
        to = "0x%s" % nodeid_tool.coinbase(str(client))
        tx = transact(endpoint,
                      sender=sender,
                      to=to,
                      value=100000000000000000000)
        if tx:
            fill_successful += 1
        time.sleep(3)
    log_event('filling.result',
              successful=fill_successful,
              total_txs_tried=len_clients)
    time.sleep(max_time_to_reach_consensus)

    start = time.time()

    # Client futures with tx loop
    with futures.ThreadPoolExecutor(max_workers=len_clients) as executor:
        future_to_client = dict(
            (executor.submit(client_tx, client, clients, inventory), client)
            for client in clients)

    for future in futures.as_completed(future_to_client, 300):
        client = future_to_client[future]
        if future.exception() is not None:
            print '%s generated an exception: %r' % (client,
                                                     future.exception())

    log_event('txs_result',
              successful=successful,
              total_txs_tried=total_txs_tried,
              max_total_txs=total_txs)

    log_event('waiting', delay=max_time_to_reach_consensus)
    time.sleep(max_time_to_reach_consensus)
    log_event('waiting.done')

    if stop_clients_at_scenario_end:
        log_event('stopping_clients')
        stop_clients(clients=clients)
        log_event('stopping_clients.done')

    global offset
    offset += time.time() - start
    print "Total offset: %s" % offset
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')
    if not run_clients:
        return

    inventory = Inventory()
    clients = inventory.clients

    # create schedule
    events = []
    num_clients = len(inventory.clients)
    num_scheduled_clients = int(num_clients * churn_ratio) if num_clients > 4 else num_clients
    for c in list(clients)[:num_scheduled_clients]:
        events.extend(mkschedule(c))
    events = sorted(events, key=lambda x: x['time'])
    assert len(events)
    print '\n'.join(repr(e) for e in events)

    # reset client storage
    # use client-reset.yml playbook

    # start-up all clients
    log_event('start_all_clients')
    start_clients(clients=clients, impls=impls)
    log_event('start_all_clients.done')

    # run events
    log_event('run_churn_schedule')
    elapsed = 0
    while events:
        e = events.pop(0)
        # sleep until time has come
        if elapsed < e['time']:
            time.sleep(e['time'] - elapsed)
            elapsed = e['time']
        cmd = dict(running=start_clients, stopped=stop_clients)[e['state']]
        client = e['client']
        print elapsed, cmd.__name__, client
        cmd(clients=[client], impls=impls)
    log_event('run_churn_schedule.done')

    # stop all clients
    log_event('stop_all_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stop_all_clients.done')

    start = time.time()

    # start all clients without mining
    log_event('start_all_clients_again')
    start_clients(clients=clients, impls=impls, enable_mining=False)
    log_event('start_all_clients_again.done')

    # let them agree on a block
    log_event('wait_for_consensus')
    time.sleep(max_time_to_reach_consensus)
    log_event('wait_for_consensus.done')

    # stop all clients
    log_event('stop_all_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stop_all_clients.done')

    global offset
    offset += time.time() - start
    print "Total offset: %ss" % offset
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')
    if not run_clients:
        return

    inventory = Inventory()
    clients = list(inventory.clients)

    log_event('starting_one_client')
    start_clients(clients=clients[:1], impls=impls)
    log_event('starting_one_client.done')
    print 'mine a bit'
    blocktime = 12
    # intitial difficulty is very high, takes around 2 minutes for initial mined block
    delay = blocktime * 14
    log_event('waiting', delay=delay)
    time.sleep(delay)

    # start other clients
    log_event('starting_other_clients')
    start_clients(clients=clients[1:], impls=impls)
    log_event('starting_other_clients.done')

    # create tx
    sender = clients[0]
    recipient = clients[1]

    rpc_host = inventory.clients[sender]
    rpc_port = 8545  # hard coded FIXME if we get multiple clients per ec
    endpoint = 'http://%s:%d' % (rpc_host, rpc_port)

    sending_address = coinbase(endpoint)
    receiving_address = "0x%s" % nodeid_tool.coinbase(str(recipient))

    print 'sending addr %s, receiving addr %s' % (sending_address, receiving_address)

    value = 100
    # print balance(endpoint, sending_address)
    # this fails randomly, why ?
    assert value < balance(endpoint, sending_address)

    start = time.time()

    log_event('sending_transaction', show=False, sender=sending_address,
              to=receiving_address, value=value)
    tx = transact(endpoint, sender=sending_address, to=receiving_address, value=value)
    log_event('sending_transaction.done', show=False, result=tx)

    log_event('waiting', delay=max_time_to_reach_consensus)
    time.sleep(max_time_to_reach_consensus)
    log_event('waiting.done')

    if stop_clients_at_scenario_end:
        log_event('stopping_clients')
        stop_clients(clients=clients, impls=impls)
        log_event('stopping_clients.done')

    global offset
    offset += time.time() - start
    print "Total offset: %s" % offset
Exemplo n.º 7
0
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')
    if not run_clients:
        return

    inventory = Inventory()
    clients = inventory.clients

    # create schedule
    events = []
    num_clients = len(inventory.clients)
    num_scheduled_clients = int(
        num_clients * churn_ratio) if num_clients > 4 else num_clients
    for c in list(clients)[:num_scheduled_clients]:
        events.extend(mkschedule(c))
    events = sorted(events, key=lambda x: x['time'])
    assert len(events)
    print '\n'.join(repr(e) for e in events)

    # reset client storage
    # use client-reset.yml playbook

    # start-up all clients
    log_event('start_all_clients')
    start_clients(clients=clients, impls=impls)
    log_event('start_all_clients.done')

    # run events
    log_event('run_churn_schedule')
    elapsed = 0
    while events:
        e = events.pop(0)
        # sleep until time has come
        if elapsed < e['time']:
            time.sleep(e['time'] - elapsed)
            elapsed = e['time']
        cmd = dict(running=start_clients, stopped=stop_clients)[e['state']]
        client = e['client']
        print elapsed, cmd.__name__, client
        cmd(clients=[client], impls=impls)
    log_event('run_churn_schedule.done')

    # stop all clients
    log_event('stop_all_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stop_all_clients.done')

    start = time.time()

    # start all clients without mining
    log_event('start_all_clients_again')
    start_clients(clients=clients, impls=impls, enable_mining=False)
    log_event('start_all_clients_again.done')

    # let them agree on a block
    log_event('wait_for_consensus')
    time.sleep(max_time_to_reach_consensus)
    log_event('wait_for_consensus.done')

    # stop all clients
    log_event('stop_all_clients')
    stop_clients(clients=clients, impls=impls)
    log_event('stop_all_clients.done')

    global offset
    offset += time.time() - start
    print "Total offset: %ss" % offset
Exemplo n.º 8
0
def run(run_clients, on_testnet):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event("started")
    if not run_clients:
        return

    inventory = Inventory()
    clients = list(inventory.clients)

    fillnode = clients.pop()

    len_clients = len(clients)
    total_txs = txs_per_client * len_clients

    log_event("starting.clients")
    start_clients(clients=clients, enable_mining=not on_testnet, testnet=on_testnet)
    log_event("starting.clients.done")

    # Fill testnodes with ether
    log_event("filling.clients")
    filler_privkey = "c85ef7d79691fe79573b1a7064c19c1a9819ebdbd1faaab1a8ec92344438aaf4"
    start_clients(clients=[fillnode], enable_mining=False, privkey=filler_privkey, testnet=on_testnet)
    if on_testnet:
        time.sleep(time_to_sync_on_testnet)
    else:
        time.sleep(15)
    rpc_host = inventory.clients[fillnode]
    rpc_port = 8545  # hard coded FIXME if we get multiple clients per ec
    endpoint = "http://%s:%d" % (rpc_host, rpc_port)
    sender = "0xcd2a3d9f938e13cd947ec05abc7fe734df8dd826"
    fill_successful = 0
    for client in clients:
        to = "0x%s" % nodeid_tool.coinbase(str(client))
        tx = transact(endpoint, sender=sender, to=to, value=100000000000000000000)
        if tx:
            fill_successful += 1
        time.sleep(3)
    log_event("filling.result", successful=fill_successful, total_txs_tried=len_clients)
    time.sleep(max_time_to_reach_consensus)

    start = time.time()

    # Client futures with tx loop
    with futures.ThreadPoolExecutor(max_workers=len_clients) as executor:
        future_to_client = dict((executor.submit(client_tx, client, clients, inventory), client) for client in clients)

    for future in futures.as_completed(future_to_client, 300):
        client = future_to_client[future]
        if future.exception() is not None:
            print "%s generated an exception: %r" % (client, future.exception())

    log_event("txs_result", successful=successful, total_txs_tried=total_txs_tried, max_total_txs=total_txs)

    log_event("waiting", delay=max_time_to_reach_consensus)
    time.sleep(max_time_to_reach_consensus)
    log_event("waiting.done")

    if stop_clients_at_scenario_end:
        log_event("stopping_clients")
        stop_clients(clients=clients)
        log_event("stopping_clients.done")

    global offset
    offset += time.time() - start
    print "Total offset: %s" % offset
Exemplo n.º 9
0
def run(run_clients):
    """Run the clients.

    Because of ``autouse=True`` this method is executed before everything else
    in this module.

    The `run_clients` fixture is defined in ``conftest.py``. It is true by
    default but false if the --norun command line flag is set.
    """
    log_event('started')
    if not run_clients:
        return

    inventory = Inventory()
    clients = list(inventory.clients)

    log_event('starting_one_client')
    start_clients(clients=clients[:1], impls=impls)
    log_event('starting_one_client.done')
    print 'mine a bit'
    blocktime = 12
    # intitial difficulty is very high, takes around 2 minutes for initial mined block
    delay = blocktime * 14
    log_event('waiting', delay=delay)
    time.sleep(delay)

    # start other clients
    log_event('starting_other_clients')
    start_clients(clients=clients[1:], impls=impls)
    log_event('starting_other_clients.done')

    # create tx
    sender = clients[0]
    recipient = clients[1]

    rpc_host = inventory.clients[sender]
    rpc_port = 8545  # hard coded FIXME if we get multiple clients per ec
    endpoint = 'http://%s:%d' % (rpc_host, rpc_port)

    sending_address = coinbase(endpoint)
    receiving_address = "0x%s" % nodeid_tool.coinbase(str(recipient))

    print 'sending addr %s, receiving addr %s' % (sending_address,
                                                  receiving_address)

    value = 100
    # print balance(endpoint, sending_address)
    # this fails randomly, why ?
    assert value < balance(endpoint, sending_address)

    start = time.time()

    log_event('sending_transaction',
              show=False,
              sender=sending_address,
              to=receiving_address,
              value=value)
    tx = transact(endpoint,
                  sender=sending_address,
                  to=receiving_address,
                  value=value)
    log_event('sending_transaction.done', show=False, result=tx)

    log_event('waiting', delay=max_time_to_reach_consensus)
    time.sleep(max_time_to_reach_consensus)
    log_event('waiting.done')

    if stop_clients_at_scenario_end:
        log_event('stopping_clients')
        stop_clients(clients=clients, impls=impls)
        log_event('stopping_clients.done')

    global offset
    offset += time.time() - start
    print "Total offset: %s" % offset