Exemplo n.º 1
0
 def wait(self, timeout=None):
     if not self._is_owned():
         raise RuntimeError("cannot wait on un-acquired lock")
     waiter = Lock()
     waiter.acquire()
     self.__waiters.append(waiter)
     saved_state = self._release_save()
     try:    # restore state no matter what (e.g., KeyboardInterrupt)
         if timeout is None:
             waiter.acquire()
         else:
             # Balancing act:  We can't afford a pure busy loop, so we
             # have to sleep; but if we sleep the whole timeout time,
             # we'll be unresponsive.  The scheme here sleeps very
             # little at first, longer as time goes on, but never longer
             # than 20 times per second (or the timeout time remaining).
             endtime = _time() + timeout
             delay = 0.0005  # 500 us -> initial delay of 1 ms
             while True:
                 gotit = waiter.acquire(0)
                 if gotit:
                     break
                 remaining = endtime - _time()
                 if remaining <= 0:
                     break
                 delay = min(delay * 2, remaining, .05)
                 _sleep(delay)
             if not gotit:
                 try:
                     self.__waiters.remove(waiter)
                 except ValueError:
                     pass
     finally:
         self._acquire_restore(saved_state)
Exemplo n.º 2
0
 def wait(self, timeout=None):
     if not self._is_owned():
         raise RuntimeError("cannot wait on un-acquired lock")
     waiter = Lock()
     waiter.acquire()
     self.__waiters.append(waiter)
     saved_state = self._release_save()
     try:  # restore state no matter what (e.g., KeyboardInterrupt)
         if timeout is None:
             waiter.acquire()
         else:
             # Balancing act:  We can't afford a pure busy loop, so we
             # have to sleep; but if we sleep the whole timeout time,
             # we'll be unresponsive.  The scheme here sleeps very
             # little at first, longer as time goes on, but never longer
             # than 20 times per second (or the timeout time remaining).
             endtime = _time() + timeout
             delay = 0.0005  # 500 us -> initial delay of 1 ms
             while True:
                 gotit = waiter.acquire(0)
                 if gotit:
                     break
                 remaining = endtime - _time()
                 if remaining <= 0:
                     break
                 delay = min(delay * 2, remaining, .05)
                 _sleep(delay)
             if not gotit:
                 try:
                     self.__waiters.remove(waiter)
                 except ValueError:
                     pass
     finally:
         self._acquire_restore(saved_state)
Exemplo n.º 3
0
class RLock(object):

    def __init__(self):
        self.__block = Lock()
        self.__owner = None
        self.__count = 0

    def __repr__(self):
        owner = self.__owner
        return "<%s owner=%r count=%d>" % (
            self.__class__.__name__, owner, self.__count)

    def acquire(self, blocking=1):
        me = get_ident()
        if self.__owner == me:
            self.__count = self.__count + 1
            return 1
        rc = self.__block.acquire(blocking)
        if rc:
            self.__owner = me
            self.__count = 1
        return rc

    __enter__ = acquire

    def release(self):
        if self.__owner != get_ident():
            raise RuntimeError("cannot release un-acquired lock")
        self.__count = count = self.__count - 1
        if not count:
            self.__owner = None
            self.__block.release()

    def __exit__(self, t, v, tb):
        self.release()

    # Internal methods used by condition variables

    def _acquire_restore(self, count_owner):
        count, owner = count_owner
        self.__block.acquire()
        self.__count = count
        self.__owner = owner

    def _release_save(self):
        count = self.__count
        self.__count = 0
        owner = self.__owner
        self.__owner = None
        self.__block.release()
        return (count, owner)

    def _is_owned(self):
        return self.__owner == get_ident()
Exemplo n.º 4
0
class RLock(object):
    def __init__(self):
        self.__block = Lock()
        self.__owner = None
        self.__count = 0

    def __repr__(self):
        owner = self.__owner
        return "<%s owner=%r count=%d>" % (self.__class__.__name__, owner,
                                           self.__count)

    def acquire(self, blocking=1):
        me = get_ident()
        if self.__owner == me:
            self.__count = self.__count + 1
            return 1
        rc = self.__block.acquire(blocking)
        if rc:
            self.__owner = me
            self.__count = 1
        return rc

    __enter__ = acquire

    def release(self):
        if self.__owner != get_ident():
            raise RuntimeError("cannot release un-acquired lock")
        self.__count = count = self.__count - 1
        if not count:
            self.__owner = None
            self.__block.release()

    def __exit__(self, t, v, tb):
        self.release()

    # Internal methods used by condition variables

    def _acquire_restore(self, count_owner):
        count, owner = count_owner
        self.__block.acquire()
        self.__count = count
        self.__owner = owner

    def _release_save(self):
        count = self.__count
        self.__count = 0
        owner = self.__owner
        self.__owner = None
        self.__block.release()
        return (count, owner)

    def _is_owned(self):
        return self.__owner == get_ident()
Exemplo n.º 5
0
class BufferedReader(RawIOBase):

    def __init__(self, raw, buffer_size=DEFAULT_BUFFER_SIZE):
        self.raw = raw
        if buffer_size <= 0:
            raise ValueError("invalid buffer size")
        self.buffer_size = buffer_size
        self._reset_read_buf()
        self._read_lock = Lock()

    def _reset_read_buf(self):
        self._read_buf = ""
        self._read_pos = 0

    def read(self, n=None):
        """Read n bytes.

        Returns exactly n bytes of data unless the underlying raw IO
        stream reaches EOF or if the call would block in non-blocking
        mode. If n is negative, read until EOF or until read() would
        block.
        """
        if n is not None and n < -1:
            raise ValueError("invalid number of bytes to read")

        self._read_lock.acquire()
        try:
            return self._read_unlocked(n)
        finally:
            self._read_lock.release()

    def readinto(self, b):
        """Read up to len(b) bytes into b.

        Like read(), this may issue multiple reads to the underlying raw
        stream, unless the latter is 'interactive'.

        Returns the number of bytes read (0 for EOF).

        Raises BlockingIOError if the underlying raw stream has no
        data at the moment.
        """
        # XXX This ought to work with anything that supports the buffer API
        data = self.read(len(b))
        n = len(data)
        try:
            b[:n] = data
        except TypeError, err:
            import array
            if not isinstance(b, array.array):
                raise err
            b[:n] = array.array('b', data)
        return n
Exemplo n.º 6
0
class BufferedReader(RawIOBase):
    def __init__(self, raw, buffer_size=DEFAULT_BUFFER_SIZE):
        self.raw = raw
        if buffer_size <= 0:
            raise ValueError("invalid buffer size")
        self.buffer_size = buffer_size
        self._reset_read_buf()
        self._read_lock = Lock()

    def _reset_read_buf(self):
        self._read_buf = ""
        self._read_pos = 0

    def read(self, n=None):
        """Read n bytes.

        Returns exactly n bytes of data unless the underlying raw IO
        stream reaches EOF or if the call would block in non-blocking
        mode. If n is negative, read until EOF or until read() would
        block.
        """
        if n is not None and n < -1:
            raise ValueError("invalid number of bytes to read")

        self._read_lock.acquire()
        try:
            return self._read_unlocked(n)
        finally:
            self._read_lock.release()

    def readinto(self, b):
        """Read up to len(b) bytes into b.

        Like read(), this may issue multiple reads to the underlying raw
        stream, unless the latter is 'interactive'.

        Returns the number of bytes read (0 for EOF).

        Raises BlockingIOError if the underlying raw stream has no
        data at the moment.
        """
        # XXX This ought to work with anything that supports the buffer API
        data = self.read(len(b))
        n = len(data)
        try:
            b[:n] = data
        except TypeError, err:
            import array
            if not isinstance(b, array.array):
                raise err
            b[:n] = array.array('b', data)
        return n
Exemplo n.º 7
0
class Queue:
    """Create a queue object with a given maximum size.

    If maxsize is <= 0, the queue size is infinite.
    """
    def __init__(self, maxsize=0):
        self.maxsize = maxsize
        self._init(maxsize)
        # mutex must be held whenever the queue is mutating.  All methods
        # that acquire mutex must release it before returning.  mutex
        # is shared between the three conditions, so acquiring and
        # releasing the conditions also acquires and releases mutex.
        self.mutex = Lock()
        # Notify not_empty whenever an item is added to the queue; a
        # thread waiting to get is notified then.
        self.not_empty = Condition(self.mutex)
        # Notify not_full whenever an item is removed from the queue;
        # a thread waiting to put is notified then.
        self.not_full = Condition(self.mutex)
        # Notify all_tasks_done whenever the number of unfinished tasks
        # drops to zero; thread waiting to join() is notified to resume
        self.all_tasks_done = Condition(self.mutex)
        self.unfinished_tasks = 0

    def task_done(self):
        """Indicate that a formerly enqueued task is complete.

        Used by Queue consumer threads.  For each get() used to fetch a task,
        a subsequent call to task_done() tells the queue that the processing
        on the task is complete.

        If a join() is currently blocking, it will resume when all items
        have been processed (meaning that a task_done() call was received
        for every item that had been put() into the queue).

        Raises a ValueError if called more times than there were items
        placed in the queue.
        """
        self.all_tasks_done.acquire()
        try:
            unfinished = self.unfinished_tasks - 1
            if unfinished <= 0:
                if unfinished < 0:
                    raise ValueError('task_done() called too many times')
                self.all_tasks_done.notify_all()
            self.unfinished_tasks = unfinished
        finally:
            self.all_tasks_done.release()

    def join(self):
        """Blocks until all items in the Queue have been gotten and processed.

        The count of unfinished tasks goes up whenever an item is added to the
        queue. The count goes down whenever a consumer thread calls task_done()
        to indicate the item was retrieved and all work on it is complete.

        When the count of unfinished tasks drops to zero, join() unblocks.
        """
        self.all_tasks_done.acquire()
        try:
            while self.unfinished_tasks:
                self.all_tasks_done.wait()
        finally:
            self.all_tasks_done.release()

    def qsize(self):
        """Return the approximate size of the queue (not reliable!)."""
        self.mutex.acquire()
        try:
            return self._qsize()
        finally:
            self.mutex.release()

    def empty(self):
        """Return True if the queue is empty, False otherwise (not reliable!)."""
        self.mutex.acquire()
        try:
            return not self._qsize()
        finally:
            self.mutex.release()

    def full(self):
        """Return True if the queue is full, False otherwise (not reliable!)."""
        self.mutex.acquire()
        try:
            if self.maxsize <= 0:
                return False
            if self.maxsize >= self._qsize():
                return True
        finally:
            self.mutex.release()

    def put(self, item, block=True, timeout=None):
        """Put an item into the queue.

        If optional args 'block' is true and 'timeout' is None (the default),
        block if necessary until a free slot is available. If 'timeout' is
        a positive number, it blocks at most 'timeout' seconds and raises
        the Full exception if no free slot was available within that time.
        Otherwise ('block' is false), put an item on the queue if a free slot
        is immediately available, else raise the Full exception ('timeout'
        is ignored in that case).
        """
        self.not_full.acquire()
        try:
            if self.maxsize > 0:
                if not block:
                    if self._qsize() >= self.maxsize:
                        raise Full
                elif timeout is None:
                    while self._qsize() >= self.maxsize:
                        self.not_full.wait()
                elif timeout < 0:
                    raise ValueError("'timeout' must be a positive number")
                else:
                    endtime = _time() + timeout
                    while self._qsize() >= self.maxsize:
                        remaining = endtime - _time()
                        if remaining <= 0.0:
                            raise Full
                        self.not_full.wait(remaining)
            self._put(item)
            self.unfinished_tasks += 1
            self.not_empty.notify()
        finally:
            self.not_full.release()

    def put_nowait(self, item):
        """Put an item into the queue without blocking.

        Only enqueue the item if a free slot is immediately available.
        Otherwise raise the Full exception.
        """
        return self.put(item, False)

    def get(self, block=True, timeout=None):
        """Remove and return an item from the queue.

        If optional args 'block' is true and 'timeout' is None (the default),
        block if necessary until an item is available. If 'timeout' is
        a positive number, it blocks at most 'timeout' seconds and raises
        the Empty exception if no item was available within that time.
        Otherwise ('block' is false), return an item if one is immediately
        available, else raise the Empty exception ('timeout' is ignored
        in that case).
        """
        self.not_empty.acquire()
        try:
            if not block:
                if not self._qsize():
                    raise Empty
            elif timeout is None:
                while not self._qsize():
                    self.not_empty.wait()
            elif timeout < 0:
                raise ValueError("'timeout' must be a positive number")
            else:
                endtime = _time() + timeout
                while not self._qsize():
                    remaining = endtime - _time()
                    if remaining <= 0.0:
                        raise Empty
                    self.not_empty.wait(remaining)
            item = self._get()
            self.not_full.notify()
            return item
        finally:
            self.not_empty.release()

    def get_nowait(self):
        """Remove and return an item from the queue without blocking.

        Only get an item if one is immediately available. Otherwise
        raise the Empty exception.
        """
        return self.get(False)

    # Override these methods to implement other queue organizations
    # (e.g. stack or priority queue).
    # These will only be called with appropriate locks held

    # Initialize the queue representation
    def _init(self, maxsize):
        self.queue = deque()

    def _qsize(self, len=len):
        return len(self.queue)

    # Put a new item in the queue
    def _put(self, item):
        self.queue.append(item)

    # Get an item from the queue
    def _get(self):
        return self.queue.popleft()
Exemplo n.º 8
0
class Queue:
    """Create a queue object with a given maximum size.

    If maxsize is <= 0, the queue size is infinite.
    """
    def __init__(self, maxsize=0):
        self.maxsize = maxsize
        self._init(maxsize)
        # mutex must be held whenever the queue is mutating.  All methods
        # that acquire mutex must release it before returning.  mutex
        # is shared between the three conditions, so acquiring and
        # releasing the conditions also acquires and releases mutex.
        self.mutex = Lock()
        # Notify not_empty whenever an item is added to the queue; a
        # thread waiting to get is notified then.
        self.not_empty = Condition(self.mutex)
        # Notify not_full whenever an item is removed from the queue;
        # a thread waiting to put is notified then.
        self.not_full = Condition(self.mutex)
        # Notify all_tasks_done whenever the number of unfinished tasks
        # drops to zero; thread waiting to join() is notified to resume
        self.all_tasks_done = Condition(self.mutex)
        self.unfinished_tasks = 0

    def task_done(self):
        """Indicate that a formerly enqueued task is complete.

        Used by Queue consumer threads.  For each get() used to fetch a task,
        a subsequent call to task_done() tells the queue that the processing
        on the task is complete.

        If a join() is currently blocking, it will resume when all items
        have been processed (meaning that a task_done() call was received
        for every item that had been put() into the queue).

        Raises a ValueError if called more times than there were items
        placed in the queue.
        """
        self.all_tasks_done.acquire()
        try:
            unfinished = self.unfinished_tasks - 1
            if unfinished <= 0:
                if unfinished < 0:
                    raise ValueError('task_done() called too many times')
                self.all_tasks_done.notify_all()
            self.unfinished_tasks = unfinished
        finally:
            self.all_tasks_done.release()

    def join(self):
        """Blocks until all items in the Queue have been gotten and processed.

        The count of unfinished tasks goes up whenever an item is added to the
        queue. The count goes down whenever a consumer thread calls task_done()
        to indicate the item was retrieved and all work on it is complete.

        When the count of unfinished tasks drops to zero, join() unblocks.
        """
        self.all_tasks_done.acquire()
        try:
            while self.unfinished_tasks:
                self.all_tasks_done.wait()
        finally:
            self.all_tasks_done.release()

    def qsize(self):
        """Return the approximate size of the queue (not reliable!)."""
        self.mutex.acquire()
        try:
            return self._qsize()
        finally:
            self.mutex.release()

    def empty(self):
        """Return True if the queue is empty, False otherwise (not reliable!)."""
        self.mutex.acquire()
        try:
            return not self._qsize()
        finally:
            self.mutex.release()

    def full(self):
        """Return True if the queue is full, False otherwise (not reliable!)."""
        self.mutex.acquire()
        try:
            if self.maxsize <= 0:
                return False
            if self.maxsize >= self._qsize():
                return True
        finally:
            self.mutex.release()

    def put(self, item, block=True, timeout=None):
        """Put an item into the queue.

        If optional args 'block' is true and 'timeout' is None (the default),
        block if necessary until a free slot is available. If 'timeout' is
        a positive number, it blocks at most 'timeout' seconds and raises
        the Full exception if no free slot was available within that time.
        Otherwise ('block' is false), put an item on the queue if a free slot
        is immediately available, else raise the Full exception ('timeout'
        is ignored in that case).
        """
        self.not_full.acquire()
        try:
            if self.maxsize > 0:
                if not block:
                    if self._qsize() >= self.maxsize:
                        raise Full
                elif timeout is None:
                    while self._qsize() >= self.maxsize:
                        self.not_full.wait()
                elif timeout < 0:
                    raise ValueError("'timeout' must be a positive number")
                else:
                    endtime = _time() + timeout
                    while self._qsize() >= self.maxsize:
                        remaining = endtime - _time()
                        if remaining <= 0.0:
                            raise Full
                        self.not_full.wait(remaining)
            self._put(item)
            self.unfinished_tasks += 1
            self.not_empty.notify()
        finally:
            self.not_full.release()

    def put_nowait(self, item):
        """Put an item into the queue without blocking.

        Only enqueue the item if a free slot is immediately available.
        Otherwise raise the Full exception.
        """
        return self.put(item, False)

    def get(self, block=True, timeout=None):
        """Remove and return an item from the queue.

        If optional args 'block' is true and 'timeout' is None (the default),
        block if necessary until an item is available. If 'timeout' is
        a positive number, it blocks at most 'timeout' seconds and raises
        the Empty exception if no item was available within that time.
        Otherwise ('block' is false), return an item if one is immediately
        available, else raise the Empty exception ('timeout' is ignored
        in that case).
        """
        self.not_empty.acquire()
        try:
            if not block:
                if not self._qsize():
                    raise Empty
            elif timeout is None:
                while not self._qsize():
                    self.not_empty.wait()
            elif timeout < 0:
                raise ValueError("'timeout' must be a positive number")
            else:
                endtime = _time() + timeout
                while not self._qsize():
                    remaining = endtime - _time()
                    if remaining <= 0.0:
                        raise Empty
                    self.not_empty.wait(remaining)
            item = self._get()
            self.not_full.notify()
            return item
        finally:
            self.not_empty.release()

    def get_nowait(self):
        """Remove and return an item from the queue without blocking.

        Only get an item if one is immediately available. Otherwise
        raise the Empty exception.
        """
        return self.get(False)

    # Override these methods to implement other queue organizations
    # (e.g. stack or priority queue).
    # These will only be called with appropriate locks held

    # Initialize the queue representation
    def _init(self, maxsize):
        self.queue = deque()

    def _qsize(self, len=len):
        return len(self.queue)

    # Put a new item in the queue
    def _put(self, item):
        self.queue.append(item)

    # Get an item from the queue
    def _get(self):
        return self.queue.popleft()