def deltaphicorr_qphivals(img1,
img2,
mask=None,
qlist=None,
philist=None,
dq=0,
noqs=None,
nophis=None,
x0=None,
y0=None,
interp=0):
''' return the qs and phis for the delta phicorrelation parameters
'''
if (x0 is None):
x0 = img1.shape[1] / 2
if (y0 is None):
y0 = img1.shape[0] / 2
if (mask is None):
mask = np.ones(img1.shape)
if (qlist is None):
if (noqs is None):
noqs = 800
else:
noqs = len(qlist) // 2
if (philist is None):
if (nophis is None):
nophis = 360
else:
nophis = len(philist) // 2
# 0. get pixellist and relevant data
pxlst = np.where(mask.ravel() == 1)
data1 = img1.ravel()[pxlst]
data2 = img2.ravel()[pxlst]
# 1. Make coord system and grab selected pixels (only if qlist or philist not specified)
if (qlist is None or philist is None):
QS, PHIS = mkpolar(img1, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
# 2. make the lists for selection (only if qlist of philist not specified)
if (qlist is None):
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
else:
qlist_m1 = qlist
if (philist is None):
philist_m1 = linplist(np.min(phis), np.max(phis), nophis)
else:
philist_m1 = philist
qs_m1 = (qlist_m1[0::2] + qlist_m1[1::2]) / 2.
phis_m1 = (philist_m1[0::2] + philist_m1[1::2]) / 2.
return qs_m1, phis_m1
def circsum(img, x0=None, y0=None, mask=None, SIMG=None, noqs=None):
''' Compute a circular sum of the data.
x0 : x center
y0 : y center
mask : the mask
If SIMG is not null, put the data into this image.
noqs : the number of qs to partition into. Default is
the number of pixels approximately.
'''
dimy, dimx = img.shape
if (mask is None):
pxlst = np.arange(dimx * dimy)
else:
pxlst = np.where(mask.ravel() == 1)[0]
if (x0 is None):
x0 = dimx / 2
if (y0 is None):
y0 = dimy / 2
QS, PHIS = mkpolar(img, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
data = img.ravel()[pxlst]
if (noqs is None):
noqs = (np.max(qs) - np.min(qs)).astype(int)
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
#philist_m1 = linplist(np.min(phis),np.max(phis),1)
qid, pselect = partition1D(qlist_m1, qs)
sqy = partition_sum(data[pselect], qid)
#sqx = partition_avg(qs[pselect],qid)
sqx = (qlist_m1[0::2] + qlist_m1[1::2]) / 2.
if (SIMG is not None):
SIMGtmp = 0 * SIMG
SIMGtmp = np.interp(QS, sqx, sqy)
np.copyto(SIMG, SIMGtmp)
return sqx, sqy
def qphisum(img,
x0=None,
y0=None,
mask=None,
SIMG=None,
qlist=None,
philist=None,
noqs=None,
nophis=None,
interp=None):
''' Compute a qphi average of the data.
x0 : x center
y0 : y center
mask : the mask
If SIMG is not null, put the data into this image.
noqs : the number of qs to partition into. Default is
the number of pixels approximately.
interp : interpolation methods:
None (default) : no interpolation
1 : interpolate in phi only (loop over q's)
... so far no other methods
'''
dimy, dimx = img.shape
if (mask is None):
pxlst = np.arange(dimx * dimy)
else:
pxlst = np.where(mask.ravel() == 1)[0]
if (x0 is None):
x0 = dimx / 2
if (y0 is None):
y0 = dimy / 2
if (qlist is None):
if (noqs is None):
noqs = 800
qlist_m1 = None
elif (len(qlist) == 1):
noqs = qlist
qlist_m1 = None
else:
qlist_m1 = np.array(qlist)
noqs = qlist_m1.shape[0] // 2
if (philist is None):
if (nophis is None):
nophis = 360
philist_m1 = None
elif (len(philist) == 1):
noqs = philist
philist_m1 = None
else:
philist_m1 = np.array(philist)
nophis = philist_m1.shape[0] // 2
QS, PHIS = mkpolar(img, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
data = img.ravel()[pxlst]
if (noqs is None):
noqs = (np.max(qs) - np.min(qs))
if (nophis is None):
nophis = 12
nophis = int(nophis)
noqs = int(noqs)
if (qlist_m1 is None):
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
if (philist_m1 is None):
philist_m1 = linplist(np.min(phis), np.max(phis), nophis)
qid, pid, pselect = partition2D(qlist_m1, philist_m1, qs, phis)
bid = (qid * nophis + pid).astype(int)
sqphi = partition_sum(data[pselect], bid)
sqphitot = np.zeros((noqs, nophis))
maxid = np.max(bid)
sqphitot.ravel()[:maxid + 1] = sqphi
phis_m1 = (philist_m1[0::2] + philist_m1[1::2]) / 2.
qs_m1 = (qlist_m1[0::2] + qlist_m1[1::2]) / 2.
if (interp is not None):
sqmask = np.zeros((noqs, nophis))
sqmask.ravel()[:maxid + 1] = partition_avg(pselect * 0 + 1, bid)
if ((interp == 1) or (interp == 2)):
for i in range(sqphitot.shape[0]):
# won't work if you have numpy version < 1.10
sqphitot[i] = fillin1d(phis_m1,
sqphitot[i],
sqmask[i],
period=2 * np.pi)
# best suited for phi range -pi/2 to pi/2, might need to change
# for diff versions
if interp == 2:
# second interp method also uses point symmetry
# reverse philist, and rebin
# assume the point of reflection is about zero, if not, maybe this
# commented code could be tried (not tested)
# first, find the point of reflection (is it about zero, -pi or pi?)
#avgphi = np.average(phis_m1)
#if(avgphi > -np.pi/2. and avgphi < np.pi/2.):
#const = 0. #do nothing
#elif(avgphi > np.pi/2. and avgphi < 3*np.pi/2.):
#const = np.pi
#elif(avgphi > -3*np.pi/2. and avgphi < -np.pi/2.):
#const = np.pi
const = 0.
# now reflect philist
philist_rev = const - philist_m1[::-1]
qidr, pidr, pselectr = partition2D(qlist_m1, philist_rev, qs, phis)
bidr = (qidr * nophis + pidr).astype(int)
maxidr = np.max(bidr)
sqphitotr = np.zeros((noqs, nophis))
sqphitotr.ravel()[:maxidr + 1] = partition_avg(
data[pselectr], bidr)
sqphitotr = sqphitotr[:, ::-1]
sqmaskr = np.zeros((noqs, nophis))
sqmaskr.ravel()[:maxidr + 1] = partition_avg(
pselectr * 0 + 1, bidr)
sqmaskr = sqmaskr[:, ::-1]
# now fill in values
# just fill in the points, don't interp
w = np.where((sqmask == 0) * (sqmaskr == 1))
sqphitot[w] = sqphitotr[w]
if (SIMG is not None):
SIMG.ravel()[pxlst[pselect]] = sqphitot.ravel()[bid]
return sqphitot
def deltaphiqqcorr(img1,
img2,
mask=None,
qlist=None,
philist=None,
noqs=None,
nophis=None,
x0=None,
y0=None,
interp=0,
PF=False):
''' The new delta phi correlations. This one returns a:
q1,q2,dphi matrix where each element is <I(q1,phi)*I(q2,phi+dphi)>_phi
img1, img2 : used for the correlations (set to equal if same image)
this is a 2nd moment calc so you need two quantities
mask : the mask for the data set
It uses the binning scheme only in one step. It transforms the image to
a qphi square grid. It then uses FFT's to transform to a qphi correlation.
NOTE: This will take quite a bit of memory depending on how big your qlist is.
'''
if (x0 is None):
x0 = img1.shape[1] / 2
if (y0 is None):
y0 = img1.shape[0] / 2
if (mask is None):
mask = np.ones(img1.shape)
if (qlist is None):
if (noqs is None):
noqs = 800
else:
noqs = len(qlist) // 2
if (philist is None):
if (nophis is None):
nophis = 360
else:
nophis = len(philist) // 2
# 0. get pixellist and relevant data
pxlst = np.where(mask.ravel() == 1)
data1 = img1.ravel()[pxlst]
data2 = img2.ravel()[pxlst]
# 1. Make coord system and grab selected pixels (only if qlist or philist not specified)
if (qlist is None or philist is None):
QS, PHIS = mkpolar(img1, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
# 2. make the lists for selection (only if qlist of philist not specified)
if (qlist is None):
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
else:
qlist_m1 = qlist
if (philist is None):
philist_m1 = linplist(np.min(phis), np.max(phis), nophis)
else:
philist_m1 = philist
qs_m1 = (qlist_m1[0::2] + qlist_m1[1::2]) / 2.
phis_m1 = (philist_m1[0::2] + philist_m1[1::2]) / 2.
# 3. transform image into a qphi map (and mask)
sq1 = qphiavg(img1,
mask=mask,
x0=x0,
y0=y0,
qlist=qlist_m1,
philist=philist_m1,
interp=interp)
sq2 = qphiavg(img2,
mask=mask,
x0=x0,
y0=y0,
qlist=qlist_m1,
philist=philist_m1,
interp=interp)
sqmask = qphiavg(img1 * 0 + 1,
mask=mask,
x0=x0,
y0=y0,
qlist=qlist_m1,
philist=philist_m1,
interp=interp)
# calculate the correlation (2nd moment, keep same binning as first moment)
nx = np.arange(noqs)
NX = np.tile(nx, (noqs, 1))
NY = np.copy(NX.T)
# indexing tricks, expand s(q,phi) into s(q1,q2, phi)
sqd1 = sq1[NX, :]
sqd2 = sq2[NY, :]
sqmask1 = sqmask[NX, :]
sqmask2 = sqmask[NY, :]
# perform convolution in phi
sqqphi = convol1d(sqd1, sqd2, axis=2)
sqmask = convol1d(sqmask1, sqmask2, axis=2)
w = np.where(sqmask != 0)
sqqphi[w] /= sqmask[w]
# # perform convolution
# for i in np.arange(-noqs+1,noqs):
# if (PF is True):
# print("Iterating over slice {} of {}".format(noqs+i,2*noqs+1))
# # grab the slice in q
# w = np.where(TX-TY == i)
# rngbeg = np.maximum(i,0)
# rngend = np.minimum(noqs,noqs+i)
# sq1tmp = np.roll(sq1,i,axis=0)[rngbeg:rngend,:]
# sq2tmp = sq2[rngbeg:rngend]
# sqmask1 = np.roll(sqmask,i,axis=0)[rngbeg:rngend,:]
# sqmask2 = sqmask[rngbeg:rngend,:]
# sqcphi = ifft(fft(sq2tmp,axis=1)*np.conj(fft(sq1tmp,axis=1)),axis=1).real
# sqcphimask = ifft(fft(sqmask1,axis=1)*np.conj(fft(sqmask2,axis=1)),axis=1).real
# sqcphi /= sqcphimask
# sqcphitot[w[0],w[1],:] = sqcphi
return sqqphi
def deltaphiqqdiff(img1,
img2,
mask=None,
noqs=None,
nophis=None,
x0=None,
y0=None,
PF=False):
''' A delta phi difference correlation. This one returns a:
q1,q2,dphi matrix where each element is <(I(q1,phi)-I(q2,phi+dphi))^2>_phi
img1, img2 : used for the correlations (set to equal if same image)
this is a 2nd moment calc so you need two quantities
mask : the mask for the data set
It uses the binning scheme only in one step. It transforms the image to
a qphi square grid. It then uses FFT's to transform to a qphi correlation.
'''
if (x0 is None):
x0 = img1.shape[1] / 2
if (y0 is None):
y0 = img1.shape[0] / 2
if (mask is None):
mask = np.ones(IMG.shape)
if (noqs is None):
noqs = 800
if (nophis is None):
nophis = 360
# 0. get pixellist and relevant data
pxlst = np.where(mask.ravel() == 1)
data1 = img1.ravel()[pxlst]
data2 = img2.ravel()[pxlst]
# 1. Make coord system and grab selected pixels
QS, PHIS = mkpolar(img1, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
# 2. make the lists for selection
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
philist_m1 = linplist(np.min(phis), np.max(phis), nophis)
# 3. partition according to the lists, 2D here, make bin id 1 dimensional
qid, pid, pselect = partition2D(qlist_m1, philist_m1, qs, phis)
bid = (qid * nophis + pid).astype(int)
# the sqphi here
sq1 = np.zeros((noqs, nophis))
sq2 = np.zeros((noqs, nophis))
sq_qs = np.zeros((noqs, nophis))
sq_phis = np.zeros((noqs, nophis))
sqmask = np.zeros((noqs, nophis))
maxid = np.max(bid)
sq1.ravel()[:maxid + 1] = partition_avg(data1[pselect], bid)
sq2.ravel()[:maxid + 1] = partition_avg(data2[pselect], bid)
sq_qs.ravel()[:maxid + 1] = partition_avg(qs[pselect], bid)
sq_phis.ravel()[:maxid + 1] = partition_avg(phis[pselect], bid)
sqmask.ravel()[:maxid + 1] = partition_avg(pselect * 0 + 1, bid)
sq_qs = np.sum(sq_qs, axis=1) / np.sum(sqmask, axis=1)
sq_phis = np.sum(sq_phis, axis=1) / np.sum(sqmask, axis=1)
sqcphitot = np.zeros((noqs, noqs, nophis))
tx = np.arange(noqs)
ty = np.arange(noqs)
TX, TY = np.meshgrid(tx, ty)
# perform convolution
for i in np.arange(-noqs + 1, noqs):
if (PF is True):
print("Iterating over slice {} of {}".format(
noqs + i, 2 * noqs + 1))
# grab the slice in q
w = np.where(TX - TY == i)
rngbeg = np.maximum(i, 0)
rngend = np.minimum(noqs, noqs + i)
sq1tmp = np.roll(sq1, i, axis=0)[rngbeg:rngend, :]
sq2tmp = sq2[rngbeg:rngend]
sqmask1 = np.roll(sqmask, i, axis=0)[rngbeg:rngend, :]
sqmask2 = sqmask[rngbeg:rngend, :]
sqcphi = ifft(fft(sq2tmp, axis=1) * np.conj(fft(sq1tmp, axis=1)),
axis=1).real
sqcphimask = ifft(fft(sqmask1, axis=1) * np.conj(fft(sqmask2, axis=1)),
axis=1).real
sqcphi /= sqcphimask
sqcphitot[w[0], w[1], :] = sqcphi
return sq_qs, sq_phis, sqcphitot
def deltaphidiff(img1,
img2,
mask=None,
qlist=None,
philist=None,
x0=None,
y0=None,
PF=False,
interp=0):
''' The new delta phi difference correlations.
img1, img2 : used for the correlations (set to equal if same image)
this is a 2nd moment calc so you need two quantities
mask : the mask for the data set
It uses the binning scheme only in one step. It transforms the image to
a qphi square grid. It then uses FFT's to transform to a qphi correlation.
interp : interpolation method.
0 - none (default)
1 - linear interpolation
2 - linear interpolation and reflect about 180 degrees (if possible)
'''
if (x0 is None):
x0 = img1.shape[1] / 2
if (y0 is None):
y0 = img1.shape[0] / 2
if (mask is None):
mask = np.ones(IMG.shape)
if (qlist is None):
noqs = 800
qlist_m1 = None
elif (len(qlist) == 1):
noqs = qlist
qlist_m1 = None
else:
qlist_m1 = qlist
if (philist is None):
nophis = 360
philist_m1 = None
elif (len(philist) == 1):
noqs = philist
philist_m1 = None
else:
philist_m1 = qlist
# 0. get pixellist and relevant data
pxlst = np.where(mask.ravel() == 1)
data1 = img1.ravel()[pxlst]
data2 = img2.ravel()[pxlst]
# 1. Make coord system and grab selected pixels
QS, PHIS = mkpolar(img1, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
# 2. make the lists for selection
# m1 means 1st moment
if (qlist_m1 is None):
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
if (philist_m1 is None):
philist_m1 = linplist(np.min(phis), np.max(phis), nophis)
# 3. partition according to the lists, 2D here, make bin id 1 dimensional
qid_m1, pid_m1, pselect_m1 = partition2D(qlist_m1, philist_m1, qs, phis)
bid_m1 = (qid_m1 * nophis + pid_m1).astype(int)
# the sqphi here
sq1 = np.zeros((noqs, nophis))
sq2 = np.zeros((noqs, nophis))
sq_qs = np.zeros((noqs, nophis))
sq_phis = np.zeros((noqs, nophis))
sqmask = np.zeros((noqs, nophis))
sqcphi = np.zeros((noqs, nophis))
sqcphimask = np.zeros((noqs, nophis))
#transform image into a qphi map (1st moment)
maxid = np.max(bid_m1)
sq1.ravel()[:maxid + 1] = partition_avg(data1[pselect_m1], bid_m1)
sq2.ravel()[:maxid + 1] = partition_avg(data2[pselect_m1], bid_m1)
sqmask.ravel()[:maxid + 1] = partition_avg(pselect_m1 * 0 + 1, bid_m1)
# calculate the correlation (2nd moment, keep same binning as first moment)
nx = np.arange(nophis)
NX = np.tile(nx, (nophis, 1))
NY = np.copy(NX.T)
# in the case where img1 != img2 there should be an asymmetry,
# but I ignore the direction and just take absolute value. It should not matter
# as the order in which I supply img1 and img2 are not relevant
NYX = NY - NX
w = np.where(NYX < 0)
NYX[w] = NYX[w] + nophis
TAUID_m2 = NYX[np.newaxis, :, :]
#import matplotlib.pyplot as plt
#plt.figure(10);plt.imshow(TAUID[0])
# m2 means 2d moment
QID_m2 = np.arange(noqs)[:, np.newaxis, np.newaxis]
BID_m2 = TAUID_m2 * noqs + QID_m2
bid_m2 = BID_m2.ravel()
# indexing tricks, expand phi dimension to a (phi, phi) dimension
sqd1 = sq1[:, NX].ravel()
sqd2 = sq2[:, NY].ravel()
sqmask1 = sqmask[:, NX].ravel()
sqmask2 = sqmask[:, NY].ravel()
# cross multiply masks
#sqd1 *= sqmask2
#sqd2 *= sqmask1
sqdiff = np.abs(sqd2 - sqd1)**2
# test first try convolution and see that it matches with current qphi corr
sqdiff = sqd2 * sqd1
sqdiffmask = sqmask1 * sqmask2
sqdiff *= sqdiffmask
res = partition_avg(sqdiff, bid_m2)
resmask = partition_avg(sqdiffmask, bid_m2)
w = np.where(resmask > 1e-6)
res[w] /= resmask[w]
bins = np.arange(np.max(bid_m2) + 1)
sqcphi[bins % noqs, bins // noqs] = res
# for i in range(dimy):
# for j in range(dimx):
# for k in range(dimx):
# if(PF is True):
# print("iteration {}, {}, {} of {}, {}, {}".format(i,j,k,dimy,dimx,dimx))
# sqcphi[i,k] += np.abs(sq1[i,j] - sq2[i,(j + k)%dimx])**2*sqmask[i,j]*sqmask[i,(j+k)%dimx]
# sqcphimask[i,j] += sqmask[i,j]*sqmask[i,(j+k)%dimx]
#sqcphi = ifft(fft(sq2,axis=1)*np.conj(fft(sq1,axis=1)),axis=1).real
#sqcphimask = ifft(fft(sqmask,axis=1)*np.conj(fft(sqmask,axis=1)),axis=1).real
return sq_qs, sq_phis, sqcphi
def deltaphicorr(img1,
img2,
mask=None,
qlist=None,
philist=None,
dq=0,
noqs=None,
nophis=None,
x0=None,
y0=None,
interp=0):
''' The new delta phi correlations.
img1, img2 : used for the correlations (set to equal if same image)
this is a 2nd moment calc so you need two quantities
mask : the mask for the data set
It uses the binning scheme only in one step. It transforms the image to
a qphi square grid. It then uses FFT's to transform to a qphi correlation.
interp : interpolation method.
0 - none (default)
1 - linear interpolation
2 - linear interpolation and reflect about 180 degrees
dq : shift by q in number of bins before correlating (q-q correlations)
'''
if (x0 is None):
x0 = img1.shape[1] / 2
if (y0 is None):
y0 = img1.shape[0] / 2
if (mask is None):
mask = np.ones(img1.shape)
if (qlist is None):
if (noqs is None):
noqs = 800
else:
noqs = len(qlist) // 2
if (philist is None):
if (nophis is None):
nophis = 360
else:
nophis = len(philist) // 2
# 0. get pixellist and relevant data
pxlst = np.where(mask.ravel() == 1)
data1 = img1.ravel()[pxlst]
data2 = img2.ravel()[pxlst]
# 1. Make coord system and grab selected pixels (only if qlist or philist not specified)
if (qlist is None or philist is None):
QS, PHIS = mkpolar(img1, x0=x0, y0=y0)
qs, phis = QS.ravel()[pxlst], PHIS.ravel()[pxlst]
# 2. make the lists for selection (only if qlist of philist not specified)
if (qlist is None):
qlist_m1 = linplist(np.min(qs), np.max(qs), noqs)
else:
qlist_m1 = qlist
if (philist is None):
philist_m1 = linplist(np.min(phis), np.max(phis), nophis)
else:
philist_m1 = philist
qs_m1 = (qlist_m1[0::2] + qlist_m1[1::2]) / 2.
phis_m1 = (philist_m1[0::2] + philist_m1[1::2]) / 2.
# 3. transform image into a qphi map (and mask)
sq1 = qphiavg(img1,
mask=mask,
x0=x0,
y0=y0,
qlist=qlist_m1,
philist=philist_m1,
interp=interp)
sq2 = qphiavg(img2,
mask=mask,
x0=x0,
y0=y0,
qlist=qlist_m1,
philist=philist_m1,
interp=interp)
sqmask = qphiavg(img1 * 0 + 1,
mask=mask,
x0=x0,
y0=y0,
qlist=qlist_m1,
philist=philist_m1,
interp=interp)
# do a q-q delta phi correlation if requested
if (dq != 0):
sq2 = np.roll(sq2, -int(dq), axis=0)
# perform convolution
sqcphi = convol1d(
sq1, sq2,
axis=1) #ifft(fft(sq2,axis=1)*np.conj(fft(sq1,axis=1)),axis=1).real
sqcphimask = convol1d(
sqmask, axis=1
) #ifft(fft(sqmask,axis=1)*np.conj(fft(sqmask,axis=1)),axis=1).real
# say .1 not zero to account for finite errors
if (interp == 0):
w = np.where(sqcphimask > .1)
sqcphi[w] /= sqcphimask[w]
elif interp == 1 or interp == 2:
sqcphi /= nophis
elif interp == 3:
# No normalization (useful for counting correlated pixels in mask)
pass
else:
print(
"Warning: reached an unexpected interp flag in qphicorr, ignoring..."
)
pass
return sqcphi
