def scan_resources(self, path, exclude_paths=None, base_path=None):
labels = self.get_labels()
resources = Resources(path)
if not base_path:
base_path = path
resources.base_path = base_path
""" os.walk(top[, topdown=True[, onerror=None[, followlinks=False]]])
When topdown is True, the caller can modify the dirnames list in-place
(perhaps using del or slice assignment), and walk() will only recurse into
the subdirectories whose names remain in dirnames; this can be used to prune
the search, impose a specific order of visiting, or even to inform walk()
about directories the caller creates or renames before it resumes walk()
again. Modifying dirnames when topdown is False is ineffective, because in
bottom-up mode the directories in dirnames are generated before dirpath
itself is generated.
"""
for root, dirs, files in walk(path, followlinks=True):
# Check if folder contains .mbedignore
if ".mbedignore" in files:
with open(join(root, ".mbedignore"), "r") as f:
lines = f.readlines()
lines = [l.strip() for l in lines] # Strip whitespaces
lines = [l for l in lines if l != ""] # Strip empty lines
lines = [l for l in lines if not re.match("^#", l)] # Strip comment lines
# Append root path to glob patterns and append patterns to ignore_patterns
self.ignore_patterns.extend([join(root, line.strip()) for line in lines])
# Skip the whole folder if ignored, e.g. .mbedignore containing '*'
if self.is_ignored(join(root, "")):
continue
for d in copy(dirs):
dir_path = join(root, d)
# Add internal repo folders/files. This is needed for exporters
if d == ".hg":
resources.repo_dirs.append(dir_path)
resources.repo_files.extend(self.scan_repository(dir_path))
if (
(d.startswith(".") or d in self.legacy_ignore_dirs)
or
# Ignore targets that do not match the TARGET in extra_labels list
(d.startswith("TARGET_") and d[7:] not in labels["TARGET"])
or
# Ignore toolchain that do not match the current TOOLCHAIN
(d.startswith("TOOLCHAIN_") and d[10:] not in labels["TOOLCHAIN"])
or
# Ignore .mbedignore files
self.is_ignored(join(dir_path, ""))
or
# Ignore TESTS dir
(d == "TESTS")
):
dirs.remove(d)
elif d.startswith("FEATURE_"):
# Recursively scan features but ignore them in the current scan.
# These are dynamically added by the config system if the conditions are matched
resources.features[d[8:]] = self.scan_resources(dir_path, base_path=base_path)
dirs.remove(d)
elif exclude_paths:
for exclude_path in exclude_paths:
rel_path = relpath(dir_path, exclude_path)
if not (rel_path.startswith("..")):
dirs.remove(d)
break
# Add root to include paths
resources.inc_dirs.append(root)
for file in files:
file_path = join(root, file)
resources.file_basepath[file_path] = base_path
if self.is_ignored(file_path):
continue
_, ext = splitext(file)
ext = ext.lower()
if ext == ".s":
resources.s_sources.append(file_path)
elif ext == ".c":
resources.c_sources.append(file_path)
elif ext == ".cpp":
resources.cpp_sources.append(file_path)
elif ext == ".h" or ext == ".hpp":
resources.headers.append(file_path)
elif ext == ".o":
resources.objects.append(file_path)
elif ext == self.LIBRARY_EXT:
resources.libraries.append(file_path)
resources.lib_dirs.add(root)
elif ext == self.LINKER_EXT:
if resources.linker_script is not None:
self.info(
"Warning: Multiple linker scripts detected: %s -> %s" % (resources.linker_script, file_path)
)
resources.linker_script = file_path
elif ext == ".lib":
resources.lib_refs.append(file_path)
elif ext == ".bld":
resources.lib_builds.append(file_path)
elif file == ".hgignore":
resources.repo_files.append(file_path)
elif ext == ".hex":
resources.hex_files.append(file_path)
elif ext == ".bin":
resources.bin_files.append(file_path)
elif ext == ".json":
resources.json_files.append(file_path)
return resources
def scan_resources(self, path, exclude_paths=None):
labels = self.get_labels()
resources = Resources(path)
self.has_config = False
""" os.walk(top[, topdown=True[, onerror=None[, followlinks=False]]])
When topdown is True, the caller can modify the dirnames list in-place
(perhaps using del or slice assignment), and walk() will only recurse into
the subdirectories whose names remain in dirnames; this can be used to prune
the search, impose a specific order of visiting, or even to inform walk()
about directories the caller creates or renames before it resumes walk()
again. Modifying dirnames when topdown is False is ineffective, because in
bottom-up mode the directories in dirnames are generated before dirpath
itself is generated.
"""
for root, dirs, files in walk(path, followlinks=True):
# Remove ignored directories
# Check if folder contains .mbedignore
if ".mbedignore" in files :
with open (join(root,".mbedignore"), "r") as f:
lines=f.readlines()
lines = [l.strip() for l in lines] # Strip whitespaces
lines = [l for l in lines if l != ""] # Strip empty lines
lines = [l for l in lines if not re.match("^#",l)] # Strip comment lines
# Append root path to glob patterns
# and append patterns to ignorepatterns
self.ignorepatterns.extend([join(root,line.strip()) for line in lines])
for d in copy(dirs):
dir_path = join(root, d)
if d == '.hg':
resources.repo_dirs.append(dir_path)
resources.repo_files.extend(self.scan_repository(dir_path))
if ((d.startswith('.') or d in self.legacy_ignore_dirs) or
(d.startswith('TARGET_') and d[7:] not in labels['TARGET']) or
(d.startswith('FEATURE_') and d[8:] not in labels['FEATURE']) or
(d.startswith('TOOLCHAIN_') and d[10:] not in labels['TOOLCHAIN']) or
(d == 'TESTS')):
dirs.remove(d)
# Remove dirs that already match the ignorepatterns
# to avoid travelling into them and to prevent them
# on appearing in include path.
if self.is_ignored(join(dir_path,"")):
dirs.remove(d)
if exclude_paths:
for exclude_path in exclude_paths:
rel_path = relpath(dir_path, exclude_path)
if not (rel_path.startswith('..')):
dirs.remove(d)
break
# Add root to include paths
resources.inc_dirs.append(root)
for file in files:
file_path = join(root, file)
if self.is_ignored(file_path):
continue
_, ext = splitext(file)
ext = ext.lower()
if ext == '.s':
resources.s_sources.append(file_path)
elif ext == '.c':
resources.c_sources.append(file_path)
elif ext == '.cpp':
resources.cpp_sources.append(file_path)
elif ext == '.h' or ext == '.hpp':
if basename(file_path) == "mbed_config.h":
self.has_config = True
resources.headers.append(file_path)
elif ext == '.o':
resources.objects.append(file_path)
elif ext == self.LIBRARY_EXT:
resources.libraries.append(file_path)
resources.lib_dirs.add(root)
elif ext == self.LINKER_EXT:
if resources.linker_script is not None:
self.info("Warning: Multiple linker scripts detected: %s -> %s" % (resources.linker_script, file_path))
resources.linker_script = file_path
elif ext == '.lib':
resources.lib_refs.append(file_path)
elif ext == '.bld':
resources.lib_builds.append(file_path)
elif file == '.hgignore':
resources.repo_files.append(file_path)
elif ext == '.hex':
resources.hex_files.append(file_path)
elif ext == '.bin':
resources.bin_files.append(file_path)
elif ext == '.json':
resources.json_files.append(file_path)
return resources
def _add_dir(self, path, resources, base_path, exclude_paths=None):
""" os.walk(top[, topdown=True[, onerror=None[, followlinks=False]]])
When topdown is True, the caller can modify the dirnames list in-place
(perhaps using del or slice assignment), and walk() will only recurse into
the subdirectories whose names remain in dirnames; this can be used to prune
the search, impose a specific order of visiting, or even to inform walk()
about directories the caller creates or renames before it resumes walk()
again. Modifying dirnames when topdown is False is ineffective, because in
bottom-up mode the directories in dirnames are generated before dirpath
itself is generated.
"""
labels = self.get_labels()
for root, dirs, files in walk(path, followlinks=True):
# Check if folder contains .mbedignore
if ".mbedignore" in files:
with open (join(root,".mbedignore"), "r") as f:
lines=f.readlines()
lines = [l.strip() for l in lines] # Strip whitespaces
lines = [l for l in lines if l != ""] # Strip empty lines
lines = [l for l in lines if not re.match("^#",l)] # Strip comment lines
# Append root path to glob patterns and append patterns to ignore_patterns
self.ignore_patterns.extend([join(root,line.strip()) for line in lines])
# Skip the whole folder if ignored, e.g. .mbedignore containing '*'
if self.is_ignored(join(root,"")):
continue
for d in copy(dirs):
dir_path = join(root, d)
# Add internal repo folders/files. This is needed for exporters
if d == '.hg' or d == '.git':
resources.repo_dirs.append(dir_path)
if ((d.startswith('.') or d in self.legacy_ignore_dirs) or
# Ignore targets that do not match the TARGET in extra_labels list
(d.startswith('TARGET_') and d[7:] not in labels['TARGET']) or
# Ignore toolchain that do not match the current TOOLCHAIN
(d.startswith('TOOLCHAIN_') and d[10:] not in labels['TOOLCHAIN']) or
# Ignore .mbedignore files
self.is_ignored(join(dir_path,"")) or
# Ignore TESTS dir
(d == 'TESTS')):
dirs.remove(d)
elif d.startswith('FEATURE_'):
# Recursively scan features but ignore them in the current scan.
# These are dynamically added by the config system if the conditions are matched
resources.features[d[8:]] = self.scan_resources(dir_path, base_path=base_path)
dirs.remove(d)
elif exclude_paths:
for exclude_path in exclude_paths:
rel_path = relpath(dir_path, exclude_path)
if not (rel_path.startswith('..')):
dirs.remove(d)
break
# Add root to include paths
resources.inc_dirs.append(root)
for file in files:
file_path = join(root, file)
self._add_file(file_path, resources, base_path)
def _add_dir(self, path, resources, base_path, exclude_paths=None):
""" os.walk(top[, topdown=True[, onerror=None[, followlinks=False]]])
When topdown is True, the caller can modify the dirnames list in-place
(perhaps using del or slice assignment), and walk() will only recurse into
the subdirectories whose names remain in dirnames; this can be used to prune
the search, impose a specific order of visiting, or even to inform walk()
about directories the caller creates or renames before it resumes walk()
again. Modifying dirnames when topdown is False is ineffective, because in
bottom-up mode the directories in dirnames are generated before dirpath
itself is generated.
"""
labels = self.get_labels()
for root, dirs, files in walk(path, followlinks=True):
# Check if folder contains .mbedignore
if ".mbedignore" in files:
with open (join(root,".mbedignore"), "r") as f:
lines=f.readlines()
lines = [l.strip() for l in lines] # Strip whitespaces
lines = [l for l in lines if l != ""] # Strip empty lines
lines = [l for l in lines if not re.match("^#",l)] # Strip comment lines
# Append root path to glob patterns and append patterns to ignore_patterns
self.ignore_patterns.extend([join(root,line.strip()) for line in lines])
# Skip the whole folder if ignored, e.g. .mbedignore containing '*'
if self.is_ignored(join(root,"")):
continue
for d in copy(dirs):
dir_path = join(root, d)
# Add internal repo folders/files. This is needed for exporters
if d == '.hg' or d == '.git':
resources.repo_dirs.append(dir_path)
if ((d.startswith('.') or d in self.legacy_ignore_dirs) or
# Ignore targets that do not match the TARGET in extra_labels list
(d.startswith('TARGET_') and d[7:] not in labels['TARGET']) or
# Ignore toolchain that do not match the current TOOLCHAIN
(d.startswith('TOOLCHAIN_') and d[10:] not in labels['TOOLCHAIN']) or
# Ignore .mbedignore files
self.is_ignored(join(dir_path,"")) or
# Ignore TESTS dir
(d == 'TESTS')):
dirs.remove(d)
elif d.startswith('FEATURE_'):
# Recursively scan features but ignore them in the current scan.
# These are dynamically added by the config system if the conditions are matched
resources.features[d[8:]] = self.scan_resources(dir_path, base_path=base_path)
dirs.remove(d)
elif exclude_paths:
for exclude_path in exclude_paths:
rel_path = relpath(dir_path, exclude_path)
if not (rel_path.startswith('..')):
dirs.remove(d)
break
# Add root to include paths
resources.inc_dirs.append(root)
for file in files:
file_path = join(root, file)
self._add_file(file_path, resources, base_path)
def scan_resources(self, path, exclude_paths=None):
labels = self.get_labels()
resources = Resources(path)
self.has_config = False
""" os.walk(top[, topdown=True[, onerror=None[, followlinks=False]]])
When topdown is True, the caller can modify the dirnames list in-place
(perhaps using del or slice assignment), and walk() will only recurse into
the subdirectories whose names remain in dirnames; this can be used to prune
the search, impose a specific order of visiting, or even to inform walk()
about directories the caller creates or renames before it resumes walk()
again. Modifying dirnames when topdown is False is ineffective, because in
bottom-up mode the directories in dirnames are generated before dirpath
itself is generated.
"""
for root, dirs, files in walk(path, followlinks=True):
# Remove ignored directories
# Check if folder contains .mbedignore
if ".mbedignore" in files:
with open(join(root, ".mbedignore"), "r") as f:
lines = f.readlines()
lines = [l.strip() for l in lines] # Strip whitespaces
lines = [l for l in lines if l != ""] # Strip empty lines
lines = [l for l in lines
if not re.match("^#", l)] # Strip comment lines
# Append root path to glob patterns
# and append patterns to ignorepatterns
self.ignorepatterns.extend(
[join(root, line.strip()) for line in lines])
for d in copy(dirs):
dir_path = join(root, d)
if d == '.hg':
resources.repo_dirs.append(dir_path)
resources.repo_files.extend(self.scan_repository(dir_path))
if ((d.startswith('.') or d in self.legacy_ignore_dirs) or
(d.startswith('TARGET_') and d[7:] not in labels['TARGET'])
or (d.startswith('FEATURE_')
and d[8:] not in labels['FEATURE'])
or (d.startswith('TOOLCHAIN_')
and d[10:] not in labels['TOOLCHAIN'])
or (d == 'TESTS')):
dirs.remove(d)
# Remove dirs that already match the ignorepatterns
# to avoid travelling into them and to prevent them
# on appearing in include path.
if self.is_ignored(join(dir_path, "")):
dirs.remove(d)
if exclude_paths:
for exclude_path in exclude_paths:
rel_path = relpath(dir_path, exclude_path)
if not (rel_path.startswith('..')):
dirs.remove(d)
break
# Add root to include paths
resources.inc_dirs.append(root)
for file in files:
file_path = join(root, file)
if self.is_ignored(file_path):
continue
_, ext = splitext(file)
ext = ext.lower()
if ext == '.s':
resources.s_sources.append(file_path)
elif ext == '.c':
resources.c_sources.append(file_path)
elif ext == '.cpp':
resources.cpp_sources.append(file_path)
elif ext == '.h' or ext == '.hpp':
if basename(file_path) == "mbed_config.h":
self.has_config = True
resources.headers.append(file_path)
elif ext == '.o':
resources.objects.append(file_path)
elif ext == self.LIBRARY_EXT:
resources.libraries.append(file_path)
resources.lib_dirs.add(root)
elif ext == self.LINKER_EXT:
if resources.linker_script is not None:
self.info(
"Warning: Multiple linker scripts detected: %s -> %s"
% (resources.linker_script, file_path))
resources.linker_script = file_path
elif ext == '.lib':
resources.lib_refs.append(file_path)
elif ext == '.bld':
resources.lib_builds.append(file_path)
elif file == '.hgignore':
resources.repo_files.append(file_path)
elif ext == '.hex':
resources.hex_files.append(file_path)
elif ext == '.bin':
resources.bin_files.append(file_path)
elif ext == '.json':
resources.json_files.append(file_path)
return resources
def scan_resources(self, path, exclude_paths=None, base_path=None):
labels = self.get_labels()
resources = Resources(path)
if not base_path:
base_path = path
resources.base_path = base_path
""" os.walk(top[, topdown=True[, onerror=None[, followlinks=False]]])
When topdown is True, the caller can modify the dirnames list in-place
(perhaps using del or slice assignment), and walk() will only recurse into
the subdirectories whose names remain in dirnames; this can be used to prune
the search, impose a specific order of visiting, or even to inform walk()
about directories the caller creates or renames before it resumes walk()
again. Modifying dirnames when topdown is False is ineffective, because in
bottom-up mode the directories in dirnames are generated before dirpath
itself is generated.
"""
for root, dirs, files in walk(path, followlinks=True):
# Check if folder contains .mbedignore
if ".mbedignore" in files:
with open(join(root, ".mbedignore"), "r") as f:
lines = f.readlines()
lines = [l.strip() for l in lines] # Strip whitespaces
lines = [l for l in lines if l != ""] # Strip empty lines
lines = [l for l in lines
if not re.match("^#", l)] # Strip comment lines
# Append root path to glob patterns and append patterns to ignore_patterns
self.ignore_patterns.extend(
[join(root, line.strip()) for line in lines])
# Skip the whole folder if ignored, e.g. .mbedignore containing '*'
if self.is_ignored(join(root, "")):
continue
for d in copy(dirs):
dir_path = join(root, d)
# Add internal repo folders/files. This is needed for exporters
if d == '.hg':
resources.repo_dirs.append(dir_path)
resources.repo_files.extend(self.scan_repository(dir_path))
if ((d.startswith('.') or d in self.legacy_ignore_dirs) or
# Ignore targets that do not match the TARGET in extra_labels list
(d.startswith('TARGET_') and d[7:] not in labels['TARGET'])
or
# Ignore toolchain that do not match the current TOOLCHAIN
(d.startswith('TOOLCHAIN_')
and d[10:] not in labels['TOOLCHAIN']) or
# Ignore .mbedignore files
self.is_ignored(join(dir_path, "")) or
# Ignore TESTS dir
(d == 'TESTS')):
dirs.remove(d)
elif d.startswith('FEATURE_'):
# Recursively scan features but ignore them in the current scan.
# These are dynamically added by the config system if the conditions are matched
resources.features[d[8:]] = self.scan_resources(
dir_path, base_path=base_path)
dirs.remove(d)
elif exclude_paths:
for exclude_path in exclude_paths:
rel_path = relpath(dir_path, exclude_path)
if not (rel_path.startswith('..')):
dirs.remove(d)
break
# Add root to include paths
resources.inc_dirs.append(root)
for file in files:
file_path = join(root, file)
resources.file_basepath[file_path] = base_path
if self.is_ignored(file_path):
continue
_, ext = splitext(file)
ext = ext.lower()
if ext == '.s':
resources.s_sources.append(file_path)
elif ext == '.c':
resources.c_sources.append(file_path)
elif ext == '.cpp':
resources.cpp_sources.append(file_path)
elif ext == '.h' or ext == '.hpp':
resources.headers.append(file_path)
elif ext == '.o':
resources.objects.append(file_path)
elif ext == self.LIBRARY_EXT:
resources.libraries.append(file_path)
resources.lib_dirs.add(root)
elif ext == self.LINKER_EXT:
if resources.linker_script is not None:
self.info(
"Warning: Multiple linker scripts detected: %s -> %s"
% (resources.linker_script, file_path))
resources.linker_script = file_path
elif ext == '.lib':
resources.lib_refs.append(file_path)
elif ext == '.bld':
resources.lib_builds.append(file_path)
elif file == '.hgignore':
resources.repo_files.append(file_path)
elif ext == '.hex':
resources.hex_files.append(file_path)
elif ext == '.bin':
resources.bin_files.append(file_path)
elif ext == '.json':
resources.json_files.append(file_path)
return resources