def __single_vision(self, pgi):
ailog = ai_log_control() # AI操作日志
pre = pgi.get_prescritpion
# pre = Prescription()
if abs(float(pre.rcyl)) > 2.00 or abs(float(pre.lcyl)) > 2.00:
logging.critical('散光度高于200 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单', 'cyl', 'od_%s' % str(pre.rcyl),
'os_%s' % str(pre.lcyl), '', '', 'YES',
'散光度高于200 不过')
return False
if float(pre.radd) > 0 or float(pre.ladd) > 0:
logging.critical('验光单包含ADD 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单', 'add', 'od_%s' % str(pre.radd),
'os_%s' % str(pre.ladd), '', '', 'YES',
'验光单包含ADD 不过')
return False
if float(pre.rpri) > 0 or float(pre.lpri) > 0:
logging.critical('验光单包含PRISM 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单', 'PRISM', 'od_%s' % str(pre.rpri),
'os_%s' % str(pre.lpri), '', '', 'YES',
'验光单包含PRISM 不过')
return False
if float(pre.rpri1) > 0 or float(pre.lpri1) > 0:
logging.critical('验光单包含PRISM1 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单', 'PRISM1', 'od_%s' % str(pre.rpri1),
'os_%s' % str(pre.rpri1), '', '', 'YES',
'验光单包含PRISM1 不过')
return False
if pre.used_for is not None and not pre.used_for == '':
logging.critical('验光单包含 Used For 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单', 'Used For', pre.used_for, '', '', '', 'YES',
'验光单包含Used For 不过')
return False
return True
def __generate_lab_orders_address_verify(self, pgo, comments):
ailog = ai_log_control() # AI操作日志
pgo.status_control = 'AI'
pgo.comments = comments
pgo.save()
# 写入LOG
if self.write_log:
ailog.add('pgorderitem', str(pgo.id), pgo.order_number,
'自动下单-生成工厂订单', 'comments', comments, '', '', '', 'YES',
'写入备注')
try:
for pgi in pgo.get_items:
pgi.comments_inner = comments
pgi.save()
# 写入LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-生成工厂订单', 'comments',
comments, '', '', '', 'YES', '写入备注')
except Exception as e:
logging.critical(str(e))
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', '',
'', '', '-1', str(e), 'NO', '205异常报错')
poc = PgOrderController()
res = poc.generate_lab_orders(pgo.order_number)
# 写入LOG
if self.write_log:
ailog.add('pgorderitem', str(pgo.id), pgo.order_number,
'自动下单-生成工厂订单', 'res', res, '', '', '', 'YES', '生成工厂订单')
logging.critical(res)
# 地址校验
ods = []
ods.append(pgo.order_number)
poc = PgOrderController()
res = poc.pgorder_address_verified(ods)
logging.critical(res)
def __update_pgi_pp(self, pgo_bese_entity, pgi):
ailog = ai_log_control()
condition_key = []
condition_value = []
is_img_url = False
try:
dict_poi = {
"order_entity": pgo_bese_entity,
"profile_entity": pgi.profile_id,
"order_item_entity": pgi.item_id,
"profile_prescription_entity": pgi.profile_prescription_id,
"prescription_entity": pgi.prescription_id
}
poc = PgOrderController()
rb = poc.get_order_image(dict_poi)
if rb.code == 0:
body = rb.body
pgi_id = pgi.id
pupils_position = body['pupils_position']
ppupils_position_name = body['pupils_position_name']
order_image_urls = body['image_urls']
condition_key.append('`pupils_position`=%s')
condition_value.append(pupils_position)
condition_key.append('`pupils_position_name`=%s')
condition_value.append(ppupils_position_name)
if len(order_image_urls) > 0:
condition_key.append('`is_has_imgs`=%s')
condition_value.append(True)
is_img_url = True
condition_value.append(pgi_id)
with connections['default'].cursor() as cursor:
update_sql = ''' UPDATE oms_pgorderitem SET ''' + ','.join(condition_key) + ''' WHERE id="%s" ''' \
% tuple(condition_value)
cursor.execute(update_sql)
return is_img_url
except Exception as e:
ailog.add('pgorder', str(pgi.id), pgi.order_number, 'get_order_image', '', '', '', '-1', str(e), 'NO',
e)
return is_img_url
def __generate_lab_orders_address_verify(self, pgo):
try:
ailog = ai_log_control() # AI操作日志
# 接口验证hold
res_data = self.__check_hold_api(pgo.order_number)
if res_data['flag']:
# Django获取pgo对象
entity_pgos = PgOrder.objects.filter(id=pgo.id)
entity_pgo = entity_pgos[0]
entity_pgo.status_control = 'AI'
# 写入LOG
if self.write_log:
ailog.add('pgorderitem', str(pgo.id), pgo.order_number, '自动下单-生成工厂订单', 'comments',
entity_pgo.comments, '', '', '', 'YES', '写入备注')
poc = PgOrderController()
res = poc.generate_lab_orders(pgo.order_number)
# 写入LOG
if self.write_log:
ailog.add('pgorderitem', str(pgo.id), pgo.order_number, '自动下单-生成工厂订单', 'res',
res, '', '', '', 'YES', '生成工厂订单')
logging.critical(res)
# 调用approve接口设置megento订单为初审完成状态
if res == 'Success':
entity_pgo.is_inlab = True
entity_pgo.save()
post_order_comment_v2(pgo.base_entity, 'PG_ORDER_REVIEWED', 'processing', pgo.create_at)
# 地址校验
ods = []
ods.append(pgo.order_number)
poc = PgOrderController()
res = poc.pgorder_address_verified(ods)
logging.critical(res)
else:
self.__update_pgorder_status(pgo.order_number)
ailog.add('pgorderitem', str(pgo.id), pgo.order_number, '自动下单-生成工厂订单', 'comments',
res_data['comment'], '', '', '', 'YES', '写入备注')
except Exception as e:
pass
def __flat_double_light_handle(self, pgi):
ailog = ai_log_control() # AI操作日志
sub_mirrors_height = 0 # 子镜高度
# 有鼻托
if pgi.is_has_nose_pad:
# 桥长大于20
if float(pgi.bridge) > 20:
if float(pgi.lens_height) <= 30: # 框高小于等于30
sub_mirrors_height = 0.5 * float(pgi.lens_height) - 3
else:
sub_mirrors_height = 0.5 * float(pgi.lens_height) - 2
else:
sub_mirrors_height = 0.5 * float(pgi.lens_height) - 3
# 无鼻托
else:
# 桥长大于20
if float(pgi.bridge) > 20:
sub_mirrors_height = 0.5 * float(pgi.lens_height) - 1
else:
if float(pgi.lens_height) <= 37: # 框高小于等于37
sub_mirrors_height = 0.5 * float(pgi.lens_height) - 3
else:
sub_mirrors_height = 0.5 * float(pgi.lens_height) - 2
# 超出范围按最大值算
if sub_mirrors_height < 13:
sub_mirrors_height = 13
if sub_mirrors_height > 19:
sub_mirrors_height = 19
# 子镜高度写入PGI，并写入备注
# Django取出对象保存
entity_pgis = PgOrderItem.objects.filter(id=pgi.id)
entity_pgi = entity_pgis[0]
#entity_pgi.comments += '子镜高度%smm;' % sub_mirrors_height
entity_pgi.sub_mirrors_height = str(sub_mirrors_height)
entity_pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'sub_mirrors_height',
str(sub_mirrors_height), '', '', '', 'YES', '计算子镜高度，写入PGI')
def __update_pgi_pp(self, pgi):
ailog = ai_log_control()
dict_poi = {
"order_entity": pgi.pg_order_entity.base_entity,
"profile_entity": pgi.profile_id,
"order_item_entity": pgi.item_id,
"profile_prescription_entity": pgi.profile_prescription_id,
"prescription_entity": pgi.prescription_id
}
poc = PgOrderController()
rb = poc.get_order_image(dict_poi)
try:
if rb.code == 0:
body = rb.body
pgi.pupils_position = body['pupils_position']
pgi.pupils_position_name = body['pupils_position_name']
pgi.save()
# entity_pgis.order_image_urls = json.dumps(body['image_urls'])
except Exception as e:
logging.exception('exception: %s' % str(e))
if self.write_log:
ailog.add('pgorder', str(pgi.id), pgi.order_number, '自动下单', '',
'', '', '-1', str(e), 'NO', '677异常报错')
def __rx_orders_handel(self, pgo, pgis):
logging.critical('开始 车房单审单')
ailog = ai_log_control() # 操作记录
is_can_auto = True # 通过标志
# 需要写入的数据
progressive_num = 0 # 渐进单数量
# 保存 pgo的base_entity
pgo_base_entity = pgo.base_entity
# 重新遍历这个pgo，来做判断
for pgi in pgis:
try:
lens = PgProduct.objects.get(sku=pgi.lens_sku)
# 如果不是车房单
if not lens.is_rx_lab:
is_can_auto = self.__single_vision(pgi) # 单光验证
if not is_can_auto: # 如果有库存单单光验证未通过，直接跳出
break
# 是车房单
else:
# 更新PGI的pupils_position和pupils_position_name
self.__update_pgi_pp(pgo_base_entity, pgi)
# 如果是渐进，记录数量,并更新字段
if float(pgi.od_add) > 0 or float(pgi.os_add) > 0:
# 渐进单做历史单检查，存在历史单不过
order_history = PgOrder.objects.filter(customer_id=pgo.customer_id, id__lt=pgo.id).only(
'order_number').order_by('-id')[:5]
if len(order_history) > 0: # 有历史单数据
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', 'order_history',
order_history[0].order_number, '', '', '', 'YES', '有历史单，不过')
return False
progressive_num += int(pgi.quantity)
# 一单中渐进数量大于1
if progressive_num > 1:
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', 'item_id',
pgi.item_id, '', '', '', 'YES', '渐进单数量大于1 不过')
is_can_auto = False
break
# 车房单光和渐进都做以下验证
# 有棱镜不过
if float(pgi.od_prism) > 0 or float(pgi.os_prism) > 0:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'prism',
'od_%s' % pgi.od_prism, 'os_%s' % pgi.os_prism, '', '', 'YES', '有棱镜不过')
is_can_auto = False
break
if float(pgi.od_prism1) > 0 or float(pgi.os_prism1) > 0:
logging.critical('有棱镜不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'prism1',
'od_%s' % pgi.od_prism1, 'os_%s' % pgi.os_prism1, '', '', 'YES', '有棱镜1不过')
is_can_auto = False
break
# 单一瞳距
if pgi.is_singgle_pd == 1:
# 儿童镜框
if pgi.frame[0] == '3':
if float(pgi.pd) <= 40:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'pd_%s' % pgi.pd, '', '', '', 'YES', '儿童镜框瞳距小于等于40 不过')
is_can_auto = False
break
# 成人镜框
else:
if float(pgi.pd) <= 45 or float(pgi.pd) > 75:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'pd_%s' % pgi.pd, '', '', '', 'YES', '成人镜框，瞳距小于等于45或大于75 不过')
is_can_auto = False
break
# 双瞳距
else:
# PD差大于5
if abs(abs(pgi.od_pd) - abs(pgi.os_pd)) >= 5:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'od_pd_%s' % pgi.od_pd, 'os_pd_%s' % pgi.os_pd, '', '', 'YES',
'双瞳距，左右瞳距差大于等于5 不过')
is_can_auto = False
break
# PD和不在范围内
sum_pd = abs(pgi.od_pd) + abs(pgi.os_pd)
if sum_pd <= 45 or sum_pd > 75:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'sum_pd_%s' % sum_pd, '', '', '', 'YES', '成人镜框，双瞳距小于等于45或大于75 不过')
is_can_auto = False
break
# 左右ADD不同
if not pgi.os_add == pgi.od_add:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'add',
'od_add_%s' % pgi.od_add, 'os_add_%s' % pgi.os_add, '', '', 'YES', '左右ADD不同 不过')
is_can_auto = False
break
# 度数差大于500
if abs(float(pgi.os_sph) - float(pgi.od_sph)) >= 5.0:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'sph',
'od_add_%s' % pgi.od_sph, 'os_add_%s' % pgi.os_sph, '', '', 'YES',
'两眼度数差大于等于500 不过')
is_can_auto = False
break
# 散光差大于500
if abs(float(pgi.os_cyl) - float(pgi.od_cyl)) >= 5.0:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'cyl',
'od_add_%s' % pgi.od_cyl, 'os_add_%s' % pgi.os_cyl, '', '', 'YES',
'两眼散光差大于等于500 不过')
is_can_auto = False
break
except Exception as e:
logging.critical(str(e))
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', '', '', '', '-1', str(e), 'NO',
'512异常报错')
# 上面验证都通过才做以下处理
if is_can_auto:
# 重新遍历这个pgo,来做处理,不区分渐进与单光
for pgi in pgis:
special_handling = '' # 加工要求
comments_item = '' # 备注
try:
# 做处理,不区分渐进与单光
if abs(float(pgi.os_sph) - float(pgi.od_sph)) >= 3.0:
special_handling += '注意平衡配重;'
comments_item += '注意平衡配重;'
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'sph',
'od_add_%s' % pgi.od_sph, 'os_add_%s' % pgi.os_sph, '', '', 'YES',
'左右眼度数差大于等于300 添加备注及特殊说明')
if abs(float(pgi.os_cyl) - float(pgi.od_cyl)) >= 3.0:
special_handling += '注意平衡配重'
comments_item += '注意平衡配重;'
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'cyl',
'od_add_%s' % pgi.od_cyl, 'os_add_%s' % pgi.os_cyl, '', '', 'YES',
'左右眼散光差大于等于300 添加备注及特殊说明')
if pgi.tint_sku[:2] == 'TS':
special_handling += '实色染色85%;'
comments_item += '实色染色85%;'
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'sku',
pgi.tint_sku, '', '', '', 'YES', '实色染色85% 添加备注及特殊说明')
if pgi.tint_sku[:2] == 'TG':
special_handling += '渐变染色70%;'
comments_item += '渐变染色70%;'
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'sku',
pgi.tint_sku, '', '', '', 'YES', '渐变染色70% 添加备注及特殊说明')
# 设计加备注
if not pgi.pal_design_name == '' and pgi.pal_design_name is not None:
if pgi.pal_design_name == 'No Line Computer Progressive':
comments_item += '车房采用 办公渐进1.3米;'
elif pgi.pal_design_name == 'No Line Office Progressive':
comments_item += '车房采用 办公渐进4米;'
elif pgi.pal_design_name == 'Easy Adapt Progressive':
comments_item += '车房采用 IOT渐进 Alpha S35;'
elif pgi.pal_design_name == 'Drive Progressive':
comments_item += '车房采用 IOT渐进 Outdoor DriveProgressive;'
elif pgi.pal_design_name == 'Sport Progressive':
comments_item += '车房采用 IOT渐进 Outdoor Sport Progressive;'
elif pgi.pal_design_name == 'Premium Progressive':
comments_item += '车房采用 IOT渐进 Alpha H45;'
elif pgi.pal_design_name == 'Mobile Enhanced Progressive':
comments_item += '车房采用 IOT渐进 Alpha Mobile;'
elif pgi.pal_design_name == 'Near Enhanced Progressive':
comments_item += '车房采用 IOT渐进 Alpha H25;'
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'sku',
pgi.pal_design_sku, pgi.pal_design_name, comments_item, '', 'YES',
'设计加备注')
# Django取出对象保存
entity_pgis = PgOrderItem.objects.filter(id=pgi.id)
entity_pgi = entity_pgis[0]
entity_pgi.comments += comments_item
entity_pgi.special_handling += special_handling
entity_pgi.save()
# 做处理，根据框型瞳高修正,区分广义渐进与单光
if float(pgi.od_add) > 0 or float(pgi.os_add) > 0: # 广义渐进
if bool(re.search('Bifocal', pgi.lens_name, re.IGNORECASE)):
self.__flat_double_light_handle(pgi) # 平顶双光处理
else: # 狭义渐进，计算瞳高
self.__progressive_handle(pgi) # 狭义渐进处理
else: # 单光给出瞳高并添加备注
entity_pgi.lab_seg_height = str(0.5 * float(pgi.lens_height) + 4)
entity_pgi.assemble_height = 'STD+1.0'
#20200811
#entity_pgi.comments += '加工瞳高%smm;' % str(0.5 * float(pgi.lens_height) + 4)
entity_pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', entity_pgi.order_number, str(entity_pgi.item_id), '自动下单-处理',
'assemble_height', str(entity_pgi.lab_seg_height), '', '', '', 'YES', '非渐进给出瞳高')
except Exception as e:
logging.critical(str(e))
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', '', '', '', '-1', str(e), 'NO',
'608异常报错')
# 生成工厂订单
if is_can_auto:
self.__generate_lab_orders_address_verify(pgo)
else:
logging.critical('车房单验证规则未通过')
def __progressive_handle(self, pgi):
ailog = ai_log_control() # AI操作日志
seg_height = 0 # 加工瞳高
standard_seg_hight = 0.5 * float(pgi.lens_height) + 3
# 有鼻托
if pgi.is_has_nose_pad:
# 桥长大于20
if float(pgi.bridge) > 20:
# 框高小于等于30
if float(pgi.lens_height) <= 30:
seg_height = standard_seg_hight
else:
seg_height = 0.5 * float(pgi.lens_height) + 4
# 桥长小于等于20
else:
seg_height = standard_seg_hight
# 无鼻托
else:
# 桥大于20
if float(pgi.bridge) > 20:
seg_height = 0.5 * float(pgi.lens_height) + 5
# 桥小于等于20
else:
# 框高小于等于37
if float(pgi.lens_height) <= 37:
seg_height = standard_seg_hight
else:
if float(pgi.lens_height) <= 43:
seg_height = 0.5 * float(pgi.lens_height) + 4
else:
seg_height = 0.5 * float(pgi.lens_height) + 5
# 根据用户习惯修正瞳高
diff_lab_seg_hight_and_std = seg_height - standard_seg_hight # 加工瞳高和标准瞳高差值
# 用户选3
if pgi.pupils_position == 3:
seg_height = seg_height + 1
diff_lab_seg_hight_and_std = seg_height - standard_seg_hight
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'lab_seg_height',
'用户选：' + str(pgi.pupils_position), str(seg_height), '', '', 'YES', '根据用户选择调整狭义渐进瞳高，计算结果')
# 用户选1
if pgi.pupils_position == 1:
# 不是标准瞳高时修改，否则不修改
if not diff_lab_seg_hight_and_std == 0:
seg_height = seg_height - 1
diff_lab_seg_hight_and_std = seg_height - standard_seg_hight
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'lab_seg_height',
'用户选：' + str(pgi.pupils_position), str(seg_height), '', '', 'YES', '根据用户选择调整狭义渐进瞳高，计算结果')
# 生成加工要求
ass_str = 'STD'
if not diff_lab_seg_hight_and_std == 0:
ass_str = 'STD+' + str(diff_lab_seg_hight_and_std)
# Django取出对象保存
entity_pgis = PgOrderItem.objects.filter(id=pgi.id)
entity_pgi = entity_pgis[0]
#20200811
#entity_pgi.comments += '加工瞳高%smm;' % seg_height
entity_pgi.lab_seg_height = str(seg_height)
entity_pgi.assemble_height = ass_str
entity_pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'lab_seg_height',
'用户选：' + str(pgi.pupils_position), str(seg_height), '', '', 'YES', '根据用户选择调整狭义渐进瞳高，写入PGI')
# 通道选择，渐进单
if pgi.lens_height == 30: # 框高等于 30
entity_pgi.channel = 'FH15'
entity_pgi.comments += '车房加工采用短通道(7mm);'
entity_pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单-处理', 'lens_height',
pgi.lens_height, 'FH15', '加备注：车房加工采用短通道(7mm)', '', 'YES', '通道选择，渐进单')
def handle(self, *args, **options):
logging.critical('start generate lab orders ....')
'''
81001:增加对订单中包含特别说明或包含测试用的COUPON_CODE的过滤
81008:修复订单中包含特别说明，影响其他单光订单下单的BUG
'''
'''
AI_CODE:AI_80919
检索所有状态正常，Not Inlab，Status=processing的订单
检索：
1.该订单下的所有Pg Order Item中的镜片为单光库存片
2.所有验光单中散光度<=200
3.ADD为0
4.PRISM为0
理论上讲，如果是单光，上述的验光单数据一定为0，但仍需验证
'''
'''
2019.07.25 --by gaoyu
Django查询，取pupils_position时大多数为0
所以把Django查询换成sql查询
逻辑重写
'''
'''
代码逻辑从新调整
'''
ailog = ai_log_control() # AI操作日志
try:
# 查找生成1小时以上的PgOrder，approved不审，REVIEWED不审
with connections["pg_oms_query"].cursor() as cursor:
sql = '''
select id,order_number,is_inst,coupon_code,instruction,customer_id,base_entity
from oms_pgorder
where is_enabled = 1
and is_inlab = 0
and status = 'processing'
and TIMESTAMPDIFF(hour,CONVERT_TZ(create_at,'+0:00','+8:00'),CURRENT_TIMESTAMP) > 0
and status_control not in('APPROVED', 'REVIEWED', 'AI', 'MANUAL')
'''
cursor.execute(sql)
pgos = namedtuplefetchall(cursor)
for pgo in pgos:
logging.critical('order_number %s' % pgo.order_number)
self.progressive_num = 0
is_can_auto = True
# check pgorder
is_can_auto_pg_flag = self.__check_pgorder(pgo, ailog)
logging.critical('is_can_auto_pg_flag %s' % is_can_auto_pg_flag)
if is_can_auto_pg_flag:
# 设置pgorder status_control 为MANUAL
self.__update_pgorder_status(pgo.order_number)
continue
# PGO 对应的 pgi
with connections["pg_oms_query"].cursor() as cursor:
sql = '''
SELECT * FROM oms_pgorderitem WHERE order_number = "%s" and attribute_set_name in ('Glasses', 'Goggles')
''' % pgo.order_number
cursor.execute(sql)
pgis = namedtuplefetchall(cursor)
if len(pgis) > 0:
for pgi in pgis:
try:
# check PgorderItem
is_can_auto_pgorderitem_flag = self.__check_pgorderitems(pgi, ailog)
logging.critical('is_can_auto_pgorderitem_flag %s' % is_can_auto_pgorderitem_flag)
if is_can_auto_pgorderitem_flag:
# 设置pgorder status_control 为MANUAL
self.__update_pgorder_status(pgi.order_number)
is_can_auto = False
break
# check PgProduct
lens_is_rx_lab = self.__check_pgproduct(pgi)
logging.critical('lens_is_rx_lab %s' % lens_is_rx_lab)
if lens_is_rx_lab == 'is_rx_lab':
is_img_url = self.__update_pgi_pp(pgo.base_entity, pgi)
# if is_img_url:
# # 设置pgorder status_control 为MANUAL
# self.__update_pgorder_status(pgi.order_number)
# is_can_auto = False
# break
is_can_auto_flag = self.__garage_check(pgo, pgi, ailog)
elif lens_is_rx_lab == 'no_is_rx_lab':
is_can_auto_flag = self.__single_vision(pgi) # 单光验证
else:
is_can_auto = False
self.__update_pgorder_status(pgi.order_number)
ailog.add('pgorderitem', str(pgo.id), pgo.order_number, '自动下单', 'comments',
'PgProduct产品未找到对应关系', '', '', '', 'YES', '写入备注')
break
if is_can_auto_flag:
# 设置pgorder status_control 为MANUAL
self.__update_pgorder_status(pgi.order_number)
is_can_auto = False
break
except Exception as e:
self.__update_pgorder_status(pgi.order_number)
logging.critical('generate lab orders completed （%s）' % e)
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', '', '', '', '-1', str(e),
'NO', '142异常报错')
logging.critical('generate lab orders completed ....')
is_can_auto = False
break
else:
is_can_auto = True
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', 'comments', '订单是nRX订单', '', '', '',
'YES', '订单是nRX订单')
# 生成laborder
if is_can_auto:
for pg_item in pgis:
# 添加备注
self.__add_comments(pg_item, ailog)
self.__generate_lab_orders_address_verify(pgo)
else:
logging.critical('验证规则未通过')
except Exception as e:
logging.critical("=================================>")
logging.critical(str(e))
logging.critical("=================================>")
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', '', '', '', '-1', str(e), 'NO', '155异常报错')
logging.critical('generate lab orders completed ....')
def __single_vision(self, pgi):
ailog = ai_log_control() # AI操作日志
if float(pgi.od_add) != 0 or float(pgi.os_add) != 0:
ailog.add('pgorderitem', str(pgo.id), pgi.order_number, '自动下单', 'item_id',
pgi.item_id, '', '', '', 'YES', 'lens_name 中不包含Progressive或者Bifocal 而add不为0 不过')
return True
if abs(float(pgi.os_cyl)) > 2.00 or abs(float(pgi.od_cyl)) > 2.00:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'cyl',
'od_%s' % str(pgi.os_cyl), 'os_%s' % str(pgi.od_cyl), '', '', 'YES', '散光度高于200 不过')
return True
if float(pgi.od_add) > 0 or float(pgi.os_add) > 0:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'add',
'od_%s' % str(pgi.od_add), 'os_%s' % str(pgi.os_add), '', '', 'YES', '验光单包含ADD 不过')
return True
if float(pgi.od_prism) > 0 or float(pgi.os_prism) > 0:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'PRISM',
'od_%s' % str(pgi.od_prism), 'os_%s' % str(pgi.os_prism), '', '', 'YES', '验光单包含PRISM 不过')
return True
if float(pgi.od_prism1) > 0 or float(pgi.os_prism1) > 0:
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'PRISM1',
'od_%s' % str(pgi.od_prism1), 'os_%s' % str(pgi.os_prism1), '', '', 'YES', '验光单包含PRISM1 不过')
return True
if pgi.used_for is not None and not pgi.used_for == '' \
and not pgi.used_for == 'READING' and not pgi.used_for == 'DISTANCE':
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'Used For',
pgi.used_for, '', '', '', 'YES', '验光单包含Used For 不过')
return True
#判断是否是平光眼镜
if not pgi.is_nonPrescription:
# 单一瞳距
if pgi.is_singgle_pd == 1:
# 儿童镜框
if pgi.frame[0] == '3':
if float(pgi.pd) <= 40:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'pd_%s' % pgi.pd, '', '', '', 'YES', '儿童镜框瞳距小于等于40 不过')
return True
# 成人镜框
else:
if float(pgi.pd) <= 45 or float(pgi.pd) > 75:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'pd_%s' % pgi.pd, '', '', '', 'YES', '成人镜框，瞳距小于等于45或大于75 不过')
return True
# 双瞳距
else:
# PD差大于5
if abs(abs(pgi.od_pd) - abs(pgi.os_pd)) >= 5:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'od_pd_%s' % pgi.od_pd, 'os_pd_%s' % pgi.os_pd, '', '', 'YES',
'双瞳距，左右瞳距差大于等于5 不过')
return True
# PD和不在范围内
sum_pd = abs(pgi.od_pd) + abs(pgi.os_pd)
if sum_pd <= 45 or sum_pd > 75:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'pd',
'sum_pd_%s' % sum_pd, '', '', '', 'YES', '成人镜框，双瞳距小于等于45或大于75 不过')
return True
# 度数差大于500
if abs(float(pgi.os_sph) - float(pgi.od_sph)) >= 5.0:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id), '自动下单', 'sph',
'od_add_%s' % pgi.od_sph, 'os_add_%s' % pgi.os_sph, '', '', 'YES',
'两眼度数差大于等于500 不过')
return True
return False
def __rx_orders_handel(self, pgo):
logging.critical('开始 车房单审单')
ailog = ai_log_control()
is_can_auto = True
progressive_num = 0 # 渐进单数量
comments = '' # 备注
# 判断有无历史单查找历史单
order_history = PgOrder.objects.filter(
customer_id=pgo.customer_id,
id__lt=pgo.id).only('order_number').order_by('-id')[:5]
if len(order_history) > 0: # 有历史单数据
logging.critical('有历史单，不过')
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单',
'order_history', order_history[0].order_number, '',
'', '', 'YES', '有历史单，不过')
return False
# 重新遍历这个pgo，来做判断
for pgi in pgo.get_items:
try:
lens = PgProduct.objects.get(sku=pgi.lens_sku)
# 如果不是车房单
if not lens.is_rx_lab:
is_can_auto = self.__single_vision(pgi) # 单光验证
if not is_can_auto: # 如果有库存单单光验证未通过，直接跳出
break
# 是车房单
else:
# 只有渐进片更新PGI的pupils_position和pupils_position_name
self.__update_pgi_pp(pgi)
# pgi = PgOrderItem()
# 如果是渐进，记录数量
if float(pgi.od_add) > 0 or float(pgi.os_add) > 0:
progressive_num += 1
iteam_id_str = ''
iteam_id_str += ',%s' % pgi.item_id
# 一单中渐进数量大于1
if progressive_num > 1:
logging.critical('渐进单数量大于1 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id),
pgo.order_number, '自动下单', 'item_id',
iteam_id_str, '', '', '', 'YES',
'渐进单数量大于1 不过')
is_can_auto = False
break
# 车房单光和渐进都做以下验证
# 偏光镜
if bool(
re.search('polarized', pgi.lens_name,
re.IGNORECASE)): # 平顶双光，计算子镜高度
logging.critical('偏光镜不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'lens_name',
pgi.lens_name, '', '', '', 'YES',
'偏光镜不过')
is_can_auto = False
break
# 有棱镜不过
if float(pgi.od_prism) > 0 or float(pgi.os_prism) > 0:
logging.critical('有棱镜不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'prism',
'od_%s' % pgi.od_prism,
'os_%s' % pgi.os_prism, '', '', 'YES',
'有棱镜不过')
is_can_auto = False
break
if float(pgi.od_prism1) > 0 or float(pgi.os_prism1) > 0:
logging.critical('有棱镜不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'prism1',
'od_%s' % pgi.od_prism1,
'os_%s' % pgi.os_prism1, '', '', 'YES',
'有棱镜1不过')
is_can_auto = False
break
# 单一瞳距
if pgi.is_singgle_pd == '1':
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单',
'what_pd=' + pgi.is_singgle_pd,
'pd_%s' % pgi.pd, '', '', '', 'YES',
'成人镜框，瞳距小于等于45或大于75 不过')
# 儿童
if pgi.frame[0] == '3':
if float(pgi.pd) <= 40:
logging.critical('儿童镜框瞳距小于等于40 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'pd',
'pd_%s' % pgi.pd, '', '', '',
'YES', '儿童镜框瞳距小于等于40 不过')
is_can_auto = False
break
# 成年人
else:
if float(pgi.pd) <= 45 or float(pgi.pd) > 75:
logging.critical('成人镜框，瞳距小于等于45或大于75 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'pd',
'pd_%s' % pgi.pd, '', '', '',
'YES', '成人镜框，瞳距小于等于45或大于75 不过')
is_can_auto = False
break
# 双瞳距
else:
if abs(abs(pgi.od_pd) - abs(pgi.os_pd)) >= 5:
logging.critical('双瞳距，左右瞳距差大于等于5 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'pd',
'od_pd_%s' % pgi.od_pd,
'os_pd_%s' % pgi.os_pd, '', '',
'YES', '双瞳距，左右瞳距差大于等于5 不过')
is_can_auto = False
break
# 左右ADD不同
if not pgi.os_add == pgi.od_add:
logging.critical('左右ADD不同 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'add',
'od_add_%s' % pgi.od_add,
'os_add_%s' % pgi.os_add, '', '', 'YES',
'左右ADD不同 不过')
is_can_auto = False
break
# 度数差大于500
if abs(float(pgi.os_sph) - float(pgi.od_sph)) >= 5.0:
logging.critical('两眼度数差大于等于500 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'sph',
'od_add_%s' % pgi.od_sph,
'os_add_%s' % pgi.os_sph, '', '', 'YES',
'两眼度数差大于等于500 不过')
is_can_auto = False
break
# 散光差大于500
if abs(float(pgi.os_cyl) - float(pgi.od_cyl)) >= 5.0:
logging.critical('两眼散光差大于等于500 不过')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单', 'cyl',
'od_add_%s' % pgi.od_cyl,
'os_add_%s' % pgi.os_cyl, '', '', 'YES',
'两眼散光差大于等于500 不过')
is_can_auto = False
break
except Exception as e:
logging.critical(str(e))
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单',
'', '', '', '-1', str(e), 'NO', '551异常报错')
# 上面验证都通过才做以下处理
if is_can_auto:
# 重新遍历这个pgo,来做处理,不区分渐进与单光
for pgi in pgo.get_items:
try:
# 做处理,不区分渐进与单光
if abs(float(pgi.os_sph) - float(pgi.od_sph)) >= 3.0:
logging.critical('左右眼度数差大于等于300 添加备注及特殊说明')
pgi.special_handling = '注意平衡配重'
pgi.comments += '注意平衡配重;'
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理', 'sph',
'od_add_%s' % pgi.od_sph,
'os_add_%s' % pgi.os_sph, '', '', 'YES',
'左右眼度数差大于等于300 添加备注及特殊说明')
if abs(float(pgi.os_cyl) - float(pgi.od_cyl)) >= 3.0:
logging.critical('左右眼散光差大于等于300 添加备注及特殊说明')
pgi.special_handling = '注意平衡配重'
pgi.comments += '注意平衡配重;'
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理', 'cyl',
'od_add_%s' % pgi.od_cyl,
'os_add_%s' % pgi.os_cyl, '', '', 'YES',
'左右眼散光差大于等于300 添加备注及特殊说明')
if pgi.tint_sku[:2] == 'TS':
logging.critical('实色染色85% 添加备注及特殊说明')
pgi.special_handling = pgi.special_handling + '实色染色85%;'
pgi.comments += '实色染色85%;'
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理', 'sku',
pgi.tint_sku, '', '', '', 'YES',
'实色染色85% 添加备注及特殊说明')
if pgi.tint_sku[:2] == 'TG':
logging.critical('渐变染色70% 添加备注及特殊说明')
pgi.special_handling = pgi.special_handling + '渐变染色70%;'
pgi.comments += '渐变染色70%;'
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理', 'sku',
pgi.tint_sku, '', '', '', 'YES',
'渐变染色70% 添加备注及特殊说明')
# 设计加备注
if not pgi.pal_design_name == '' and pgi.pal_design_name is not None:
design_comments = ''
if pgi.pal_design_name == 'No Line Computer Progressive':
design_comments = '车房采用 办公设计1.3米 渐进设计;'
elif pgi.pal_design_name == 'No Line Office Progressive':
design_comments = '车房采用 办公设计4米 渐进设计;'
elif pgi.pal_design_name == 'Easy Adapt Progressive':
design_comments = '车房采用 IOT Alpha S35 渐进设计;'
elif pgi.pal_design_name == 'Drive Progressive':
design_comments = '车房采用 IOT Drive Progressive 渐进设计;'
elif pgi.pal_design_name == 'Sport Progressive':
design_comments = '车房采用 IOT Sport Progressive 渐进设计;'
elif pgi.pal_design_name == 'Premium Progressive':
design_comments = '车房采用 IOT Alpha H45 渐进设计;'
elif pgi.pal_design_name == 'Mobile Enhanced Progressive':
design_comments = '车房采用 IOT Alpha Mobile 渐进设计;'
elif pgi.pal_design_name == 'Near Enhanced Progressive':
design_comments = '车房采用 IOT Alpha H25 渐进设计;'
else:
design_comments = ''
pgi.comments += design_comments
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理', 'sku',
pgi.pal_design_sku, pgi.pal_design_name,
design_comments, '', 'YES', '设计加备注')
# 做处理，根据框型瞳高修正,区分广义渐进与单光
if float(pgi.od_add) > 0 or float(pgi.os_add) > 0: # 广义渐进
if bool(
re.search('Lined Bifocal', pgi.lens_name,
re.IGNORECASE)):
self.__flat_double_light_handle(pgi) # 平顶双光处理
else: # 狭义渐进，计算瞳高
self.__progressive_handle(pgi) # 狭义渐进处理
else: # 单光给出瞳高并添加备注
pgi.lab_seg_height = 0.5 * float(pgi.lens_height) + 4
pgi.assemble_height = 'STD+1.0'
pgi.comments += '加工瞳高%smm;' % str(
0.5 * float(pgi.lens_height) + 4)
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id),
'自动下单-处理', 'assemble_height',
str(pgi.lab_seg_height), '', '', '',
'YES', '非渐进给出瞳高')
except Exception as e:
logging.critical(str(e))
if self.write_log:
ailog.add('pgorder', str(pgo.id),
pgo.order_number, '自动下单', '', '', '', '-1',
str(e), 'NO', '646异常报错')
# 生成工厂订单
if is_can_auto:
self.__generate_lab_orders_address_verify(pgo, comments)
else:
logging.critical('车房单验证规则未通过')
def __progressive_handle(self, pgi):
ailog = ai_log_control() # AI操作日志
seg_height = 0 # 加工瞳高
standard_seg_hight = 0.5 * float(pgi.lens_height) + 3
# 有鼻托
if int(pgi.is_has_nose_pad) == 1:
# 桥长大于20
if float(pgi.bridge) > 20:
# 框高小于等于30
if float(pgi.lens_height) <= 30:
seg_height = standard_seg_hight
else:
seg_height = 0.5 * float(pgi.lens_height) + 4
# 桥长小于等于20
else:
seg_height = standard_seg_hight
# 无鼻托
else:
# 桥大于20
if float(pgi.bridge) > 20:
seg_height = 0.5 * float(pgi.lens_height) + 5
# 桥小于等于20
else:
# 框高小于等于37
if float(pgi.lens_height) <= 37:
seg_height = standard_seg_hight
else:
if float(pgi.lens_height) <= 43:
seg_height = 0.5 * float(pgi.lens_height) + 4
else:
seg_height = 0.5 * float(pgi.lens_height) + 5
# 因为直接取PGI的pupils_position为0，所以重新查询一遍
pgi_positions = PgOrderItem.objects.filter(
order_number=pgi.order_number).values('pupils_position')
pgi_position = pgi_positions[0]
v_pgi_position = pgi_position['pupils_position']
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理', 'lab_seg_height',
str(seg_height), '用户选：' + str(pgi.pupils_position),
'二次查询结果=' + str(v_pgi_position), '', 'YES',
'计算狭义渐进瞳高，不写入PGI')
# 根据用户习惯修正瞳高
diff_lab_seg_hight_and_std = seg_height - standard_seg_hight # 加工瞳高和标准瞳高差值
# 用户选3
if v_pgi_position == 3:
seg_height = seg_height + 1
diff_lab_seg_hight_and_std = seg_height - standard_seg_hight
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单-处理',
'lab_seg_height', '用户选：' + str(v_pgi_position),
str(seg_height), '', '', 'YES',
'根据用户选择调整狭义渐进瞳高，计算结果')
# 用户选1
if v_pgi_position == 1:
# 不是标准瞳高时修改，否则不修改
if not diff_lab_seg_hight_and_std == 0:
seg_height = seg_height - 1
diff_lab_seg_hight_and_std = seg_height - standard_seg_hight
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number,
str(pgi.item_id), '自动下单-处理',
'lab_seg_height', '用户选：' + str(v_pgi_position),
str(seg_height), '', '', 'YES',
'根据用户选择调整狭义渐进瞳高，计算结果')
# 生成加工要求
ass_str = 'STD'
if not diff_lab_seg_hight_and_std == 0:
ass_str = 'STD+' + str(diff_lab_seg_hight_and_std)
# 加工瞳高写入pgorderitem,并写入备注
pgi.lab_seg_height = seg_height
pgi.assemble_height = ass_str
pgi.comments += '加工瞳高%smm;' % seg_height
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单-处理',
'lab_seg_height', '用户选：' + str(v_pgi_position),
str(seg_height), '', '', 'YES', '根据用户选择调整狭义渐进瞳高，写入PGI')
# 通道选择，渐进单
if pgi.lens_height == 30: # 框高等于 30
pgi.channel = 'FH15'
pgi.comments += '车房加工采用短通道(7mm);'
pgi.save()
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', pgi.order_number, str(pgi.item_id),
'自动下单-处理', 'lens_height', pgi.lens_height, 'FH15',
'加备注：车房加工采用短通道(7mm)', '', 'YES', '通道选择，渐进单')
def handle(self, *args, **options):
logging.critical('start generate lab orders ....')
'''
81001:增加对订单中包含特别说明或包含测试用的COUPON_CODE的过滤
81008:修复订单中包含特别说明，影响其他单光订单下单的BUG
'''
index = 0
ailog = ai_log_control() # AI操作日志
try:
# Pg Order List:
pgos = PgOrder.objects.filter(is_enabled=True,
is_inlab=False,
status='processing').filter(
~Q(status_control='APPROVED'),
~Q(status_control='REVIEWED'))
logging.critical(pgos.query)
msg = '(%s):%s: %s'
'''
AI_CODE:AI_80919
检索所有状态正常，Not Inlab，Status=processing的订单
检索：
1.该订单下的所有Pg Order Item中的镜片为单光库存片
2.所有验光单中散光度<=200
3.ADD为0
4.PRISM为0
理论上讲，如果是单光，上述的验光单数据一定为0，但仍需验证
'''
'''
2019.07.27 --by gaoyu
每个渐进订单，重新调用接口查询，pupils_position
'''
approved_pgos = []
for pgo in pgos:
logging.critical(msg %
(str(index), pgo.order_number, pgo.status))
index += 1
is_can_auto = True
# 筛选生成不足一小时的订单
now_time = datetime.datetime.now()
pg_time = pgo.create_at
dt = pg_time.replace(tzinfo=None)
dt = dt + datetime.timedelta(hours=+8)
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id),
pgo.order_number, '自动下单-时间筛选1', str(now_time),
str(pg_time), str(dt),
str((now_time - dt).seconds), '', 'YES', ' 时间')
if (now_time - dt).seconds < 3600:
logging.critical('订单创建不足一小时 不开始自动下单')
# 记录LOG
if self.write_log:
ailog.add('pgorder',
str(pgo.id), pgo.order_number, '自动下单-时间筛选2',
str(now_time), str(pg_time), str(dt),
str((now_time - dt).seconds), '', 'YES',
' 时间')
is_can_auto = False
continue
if pgo.is_inst:
logging.critical('包含特别说明 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id),
pgo.order_number, '自动下单', 'is_inst',
str(pgo.is_inst), '', '', '', 'YES',
'包含特别说明 无法自动生成')
is_can_auto = False
continue
if pgo.coupon_code == 'PG-INTERNAL':
logging.critical('内部测试订单 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number,
'自动下单', 'coupon_code', pgo.coupon_code, '',
'', '', 'YES', '内部测试订单 无法自动生成')
is_can_auto = False
continue
if pgo.coupon_code:
if bool(
re.search('REPLACE', pgo.coupon_code,
re.IGNORECASE)):
logging.critical('替换订单 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number,
'自动下单', 'coupon_code', pgo.coupon_code,
'', '', '', 'YES', '替换订单 无法自动生成')
is_can_auto = False
continue
# 包含instruction不过
if not pgo.instruction == '' and not pgo.instruction == 'null' and pgo.instruction is not None:
is_can_auto = False
logging.critical('PGO包含特别说明 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number,
'自动下单', 'instruction', pgo.instruction, '',
'', '', 'YES', 'PGO包含特别说明 无法自动生成')
is_can_auto = False
continue
if is_can_auto:
for pgi in pgo.get_items:
try:
lens = PgProduct.objects.get(sku=pgi.lens_sku)
if bool(pgi.is_has_imgs):
logging.critical('包含图片 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', str(pgi.id),
pgi.order_number, '自动下单',
'is_has_imgs',
str(pgi.is_has_imgs), '', '', '',
'YES', '包含图片 无法自动生成')
is_can_auto = False
break
if not pgi.instruction == '' and not pgi.instruction == 'null' and pgi.instruction is not None:
logging.critical('行数据包含特别说明 无法自动生成')
# 记录LOG
if self.write_log:
ailog.add('pgorderitem', str(pgi.id),
pgi.order_number, '自动下单',
'instruction',
str(pgi.instruction), '', '', '',
'YES', '行数据包含特别说明 无法自动生成')
is_can_auto = False
break
if lens.is_rx_lab:
logging.critical('车房片转入车房片判断方法')
# 转入车房片判断并生成LBO的分支
self.__rx_orders_handel(pgo)
is_can_auto = False
break
# 库存单单光验证
is_can_auto = self.__single_vision(pgi)
except Exception as e:
logging.critical(str(e))
is_can_auto = False
if self.write_log:
ailog.add('pgorder', str(pgo.id),
pgo.order_number, '自动下单', '', '', '',
'-1', str(e), 'NO', '164异常报错')
logging.critical(
'generate lab orders completed ....')
break
if is_can_auto:
self.__generate_lab_orders_address_verify(pgo, '')
else:
logging.critical('验证规则未通过或进入车房处理')
except Exception as e:
logging.critical(str(e))
if self.write_log:
ailog.add('pgorder', str(pgo.id), pgo.order_number, '自动下单', '',
'', '', '-1', str(e), 'NO', '177异常报错')
logging.critical('generate lab orders completed ....')
