def OnGlobalSave(self, event):
debug.log('OnGlobalSave', 'Dispatched', event=event)
if self._is_pressed(event):
self._button_mode |= arturia_macros.SAVE_BUTTON
self._button_hold_action_committed = False
else:
self._button_mode &= ~arturia_macros.SAVE_BUTTON
if not self._button_hold_action_committed:
transport.setLoopMode()
def OnMidiMsg(self, event):
event.handled = False
print("{:X} {:X} {:2X} {}".format(
event.status, event.data1, event.data2,
EventNameT[(event.status - 0x80) // 16] + ': ' +
utils.GetNoteName(event.data1)))
# Use midi.MIDI_NOTEON for note events.
if event.midiId == midi.MIDI_CONTROLCHANGE:
if event.data2 > 0:
if event.data1 == Transport['Stop']:
transport.stop()
event.handled = True
elif event.data1 == Transport['Start']:
transport.start()
event.handled = True
elif event.data1 == Transport['Record']:
transport.record()
event.handled = True
elif event.data1 == Transport['Loop']:
transport.setLoopMode()
event.handled = True
#FL Window Stuff
GlobalMIDIChannel = event.status // 16
#Show Window
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad01']) and (event.data2
== 0x7F):
ui.showWindow(2)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad02']) and (event.data2
== 0x7F):
ui.showWindow(1)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad03']) and (event.data2
== 0x7F):
ui.showWindow(3)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad04']) and (event.data2
== 0x7F):
ui.showWindow(0)
#Hide Window
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad01']) and (event.data2
== 0):
ui.hideWindow(2)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad02']) and (event.data2
== 0):
ui.hideWindow(1)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad03']) and (event.data2
== 0):
ui.hideWindow(3)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad04']) and (event.data2
== 0):
ui.hideWindow(0)
#Navigation
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad06']) and (event.data2
== 0x7F):
ui.escape()
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad07']) and (event.data2
== 0x7F):
ui.up()
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad08']) and (event.data2
== 0x7F):
ui.enter()
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad14']) and (event.data2
== 0x7F):
ui.left()
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad15']) and (event.data2
== 0x7F):
ui.down()
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad16']) and (event.data2
== 0x7F):
ui.right()
#Global Transport
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad09']) and (event.data2
== 0x7F):
transport.globalTransport(midi.FPT_Metronome, True)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad10']) and (event.data2
== 0x7F):
transport.globalTransport(midi.FPT_Overdub, True)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad11']) and (event.data2
== 0x7F):
transport.globalTransport(midi.FPT_CountDown, True)
if (GlobalMIDIChannel == 0xB) and (event.data1
== Pads['Pad12']) and (event.data2
== 0x7F):
transport.globalTransport(midi.FPT_TapTempo, True)
def OnMidiIn(self, event):
#tbuttons
if (event.data1 == playb):
transport.start() #play
self.UpdateLEDs()
if (event.data1 == recb):
transport.record() #record
self.UpdateLEDs()
if (event.data1 == stopb):
transport.stop() #stop
self.UpdateLEDs()
if (event.data1 == loopb):
transport.setLoopMode() #loop/pattern mode
self.UpdateLEDs()
if (event.data1 == metrob): # metronome/button
transport.globalTransport(midi.FPT_Metronome, 110)
self.UpdateLEDs()
if (event.data1 == tempob):
transport.stop() #tap tempo
if (event.data1 == quantizeb):
transport.globalTransport(midi.FPT_Snap, 48) #snap toggle
if (event.data1 == squantizeb):
ui.snapMode(1) #snap toggle
if (event.data1 == srecb):
transport.globalTransport(midi.FPT_CountDown,
115) #countdown before recordin
#if (event.data1 == sstopb):
# transport.globalTransport(midi.FPT_F12, 71) #clear all windows
if (event.data1 == undob):
general.undoUp() #undo
if (event.data1 == sundob):
general.undo() #redo
if (event.data1 == squantizeb):
transport.globalTransport(midi.FPT_SnapMode, 49,
event.pmeFlags) #snap toggle
self.UpdateLEDs()
if (event.data1 == tempob):
transport.globalTransport(midi.FPT_TapTempo, 106) #tap tempo
#4D controller
if (event.data1 == knobe):
transport.globalTransport(midi.FPT_Enter, 80) #enter
if (event.data1 == knobsp) & (event.data2
== right): #4d encoder spin right
ui.jog(1)
elif (event.data1 == knobsp) & (event.data2
== left): #4d encoder spin left
ui.jog(-1)
if (event.data1 == knoblr) & (event.data2
== right): #4d encoder push right
transport.globalTransport(midi.FPT_Right, 1)
elif (event.data1 == knoblr) & (event.data2
== left): #4d encoder push left
transport.globalTransport(midi.FPT_Left, 1)
if (event.data1 == knobud) & (event.data2 == up): #4d encoder push up
transport.globalTransport(midi.FPT_Up, 1)
elif (event.data1 == knobud) & (event.data2
== down): #4d encoder push down
transport.globalTransport(midi.FPT_Down, 1)
#8 volume knobs for mixer & channel rack, 8 tracks at a time
volinc = .005 #volume increments
paninc = .01 # pan increments
if ui.getFocused(0) == 1: #mixer volume control
if (event.data1 == muteb):
mixer.enableTrack(mixer.trackNumber()) #mute
if (event.data1 == solob):
mixer.soloTrack(mixer.trackNumber()) #solo
# VOLUME CONTROL
#knob 1
if (event.data1 == knob1):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 0,
mixer.getTrackVolume(mixer.trackNumber()) + 0 -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 0,
mixer.getTrackVolume(mixer.trackNumber()) + 0 +
volinc) # volume values go up
#knob 2
if (event.data1 == knob2):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 1,
mixer.getTrackVolume(mixer.trackNumber() + 1) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 1,
mixer.getTrackVolume(mixer.trackNumber() + 1) +
volinc) # volume values go up
#knob 3
if (event.data1 == knob3):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 2,
mixer.getTrackVolume(mixer.trackNumber() + 2) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 2,
mixer.getTrackVolume(mixer.trackNumber() + 2) +
volinc) # volume values go up
#knob 4
if (event.data1 == knob4):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 3,
mixer.getTrackVolume(mixer.trackNumber() + 3) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 3,
mixer.getTrackVolume(mixer.trackNumber() + 3) +
volinc) # volume values go up
#knob5
if (event.data1 == knob5):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 4,
mixer.getTrackVolume(mixer.trackNumber() + 4) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 4,
mixer.getTrackVolume(mixer.trackNumber() + 4) +
volinc) # volume values go up
#knob 6
if (event.data1 == knob6):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 5,
mixer.getTrackVolume(mixer.trackNumber() + 5) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 5,
mixer.getTrackVolume(mixer.trackNumber() + 5) +
volinc) # volume values go up
#knob 7
if (event.data1 == knob7):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 6,
mixer.getTrackVolume(mixer.trackNumber() + 6) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 6,
mixer.getTrackVolume(mixer.trackNumber() + 6) +
volinc) # volume values go up
#knob 8
if (event.data1 == knob8):
if event.data2 == 127:
mixer.setTrackVolume(
mixer.trackNumber() + 7,
mixer.getTrackVolume(mixer.trackNumber() + 7) -
volinc) # volume values go down
elif event.data2 == 1:
mixer.setTrackVolume(
mixer.trackNumber() + 7,
mixer.getTrackVolume(mixer.trackNumber() + 7) +
volinc) # volume values go up
# PAN CONTROL
#sknob 1
if (event.data1 == sknob1):
if event.data2 == 127:
mixer.setTrackPan(mixer.trackNumber() + 0,
mixer.getTrackPan(mixer.trackNumber()) +
0 - paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(mixer.trackNumber() + 0,
mixer.getTrackPan(mixer.trackNumber()) +
0 + paninc) # volume values go up
#sknob 2
if (event.data1 == sknob2):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 1,
mixer.getTrackPan(mixer.trackNumber() + 1) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 1,
mixer.getTrackPan(mixer.trackNumber() + 1) +
paninc) # volume values go up
#sknob 3
if (event.data1 == sknob3):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 2,
mixer.getTrackPan(mixer.trackNumber() + 2) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 2,
mixer.getTrackPan(mixer.trackNumber() + 2) +
paninc) # volume values go up
#sknob 4
if (event.data1 == sknob4):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 3,
mixer.getTrackPan(mixer.trackNumber() + 3) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 3,
mixer.getTrackPan(mixer.trackNumber() + 3) +
paninc) # volume values go up
#sknob5
if (event.data1 == sknob5):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 4,
mixer.getTrackPan(mixer.trackNumber() + 4) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 4,
mixer.getTrackPan(mixer.trackNumber() + 4) +
paninc) # volume values go up
#sknob 6
if (event.data1 == sknob6):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 5,
mixer.getTrackPan(mixer.trackNumber() + 5) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 5,
mixer.getTrackPan(mixer.trackNumber() + 5) +
paninc) # volume values go up
#sknob 7
if (event.data1 == sknob7):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 6,
mixer.getTrackPan(mixer.trackNumber() + 6) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 6,
mixer.getTrackPan(mixer.trackNumber() + 6) +
paninc) # volume values go up
#sknob 8
if (event.data1 == sknob8):
if event.data2 == 127:
mixer.setTrackPan(
mixer.trackNumber() + 7,
mixer.getTrackPan(mixer.trackNumber() + 7) -
paninc) # volume values go down
elif event.data2 == 1:
mixer.setTrackPan(
mixer.trackNumber() + 7,
mixer.getTrackPan(mixer.trackNumber() + 7) +
paninc) # volume values go up
elif ui.getFocused(0) == 0: # channel rack
if (event.data1 == muteb):
channels.muteChannel(channels.channelNumber()) #mute
if (event.data1 == solob):
channels.soloChannel(channels.channelNumber()) #solo
# VOLUME CONTROL
#knob 1
if (event.data1 == knob1):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 0,
channels.getChannelVolume(channels.channelNumber() + 0)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 0,
channels.getChannelVolume(channels.channelNumber() + 0)
+ volinc) # volume values go up
#knob 2
if (event.data1 == knob2):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 1,
channels.getChannelVolume(channels.channelNumber() + 1)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 1,
channels.getChannelVolume(channels.channelNumber() + 1)
+ volinc) # volume values go up
#knob 3
if (event.data1 == knob3):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 2,
channels.getChannelVolume(channels.channelNumber() + 2)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 2,
channels.getChannelVolume(channels.channelNumber() + 2)
+ volinc) # volume values go up
#knob 4
if (event.data1 == knob4):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 3,
channels.getChannelVolume(channels.channelNumber() + 3)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 3,
channels.getChannelVolume(channels.channelNumber() + 3)
+ volinc) # volume values go up
#knob 5
if (event.data1 == knob5):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 4,
channels.getChannelVolume(channels.channelNumber() + 4)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 4,
channels.getChannelVolume(channels.channelNumber() + 4)
+ volinc) # volume values go up
#knob 6
if (event.data1 == knob6):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 5,
channels.getChannelVolume(channels.channelNumber() + 5)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 5,
channels.getChannelVolume(channels.channelNumber() + 5)
+ volinc) # volume values go up
#knob 7
if (event.data1 == knob7):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 6,
channels.getChannelVolume(channels.channelNumber() + 6)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 6,
channels.getChannelVolume(channels.channelNumber() + 6)
+ volinc) # volume values go up
#knob 8
if (event.data1 == knob8):
if event.data2 == 127:
channels.setChannelVolume(
channels.channelNumber() + 7,
channels.getChannelVolume(channels.channelNumber() + 7)
- volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelVolume(
channels.channelNumber() + 7,
channels.getChannelVolume(channels.channelNumber() + 7)
+ volinc) # volume values go up
# PAN CONTROL
#sknob 1
if (event.data1 == sknob1):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 0,
channels.getChannelPan(channels.channelNumber() + 0) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 0,
channels.getChannelPan(channels.channelNumber() + 0) +
volinc) # volume values go up
#sknob 2
if (event.data1 == sknob2):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 1,
channels.getChannelPan(channels.channelNumber() + 1) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 1,
channels.getChannelPan(channels.channelNumber() + 1) +
volinc) # volume values go up
#sknob 3
if (event.data1 == sknob3):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 2,
channels.getChannelPan(channels.channelNumber() + 2) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 2,
channels.getChannelPan(channels.channelNumber() + 2) +
volinc) # volume values go up
#sknob 4
if (event.data1 == sknob4):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 3,
channels.getChannelPan(channels.channelNumber() + 3) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 3,
channels.getChannelPan(channels.channelNumber() + 3) +
volinc) # volume values go up
#sknob 5
if (event.data1 == sknob5):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 4,
channels.getChannelPan(channels.channelNumber() + 4) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 4,
channels.getChannelPan(channels.channelNumber() + 4) +
volinc) # volume values go up
#sknob 6
if (event.data1 == sknob6):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 5,
channels.getChannelPan(channels.channelNumber() + 5) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 5,
channels.getChannelPan(channels.channelNumber() + 5) +
volinc) # volume values go up
#sknob 7
if (event.data1 == sknob7):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 6,
channels.getChannelPan(channels.channelNumber() + 6) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 6,
channels.getChannelPan(channels.channelNumber() + 6) +
volinc) # volume values go up
#sknob 8
if (event.data1 == sknob8):
if event.data2 == 127:
channels.setChannelPan(
channels.channelNumber() + 7,
channels.getChannelPan(channels.channelNumber() + 7) -
volinc) # volume values go down
elif event.data2 == 1:
channels.setChannelPan(
channels.channelNumber() + 7,
channels.getChannelPan(channels.channelNumber() + 7) +
volinc) # volume values go up
def toggleLoopMode(self, note):
if (transport.isPlaying() == 0
): #Only toggle loop mode if not already playing
transport.setLoopMode()
print("Song/Pattern Mode toggled")
def OnButtonDoubleLoopPressed(self, control, event):
transport.setLoopMode()
def OnMidiIn(event):
""" Wrapper for the OnMidiIn thread. """
# Play button
if event.data1 == nihia.buttons.get("PLAY"):
event.handled = True
transport.start()
# Restart button
elif event.data1 == nihia.buttons.get("RESTART"):
event.handled = True
transport.setLoopMode()
# Record button
elif event.data1 == nihia.buttons.get("REC"):
event.handled = True
transport.record()
# Count-In button
elif event.data1 == nihia.buttons.get("COUNT_IN"):
event.handled = True
# Defines the standard behaviour (just to toggle "Countdown before recording" on/off)
if COUNT_IN_BEHAVIOUR == 0:
transport.globalTransport(midi.FPT_CountDown, 1)
# Defines behaviour of the button if the user chooses the Maschine-alike behaviour
if COUNT_IN_BEHAVIOUR == 1:
# Toggles recording on if it isn't enabled already
if transport.isRecording() == 0:
transport.record()
# Toggles countdown before recording on if it isn't enabled already
if ui.isPrecountEnabled() == 0:
transport.globalTransport(midi.FPT_CountDown, 1)
# Stops playback if FL Studio is playing
if transport.isPlaying() == True:
transport.stop()
# Then turns playback on again. This time record and countdown before recording will be activated
transport.start()
# Stop button
elif event.data1 == nihia.buttons.get("STOP"):
event.handled = True
transport.stop()
# Clear button
# This one in other DAWs (in Maschine, specifically) this button is meant to clear the MIDI clip you're
# on so you can record again on it without having to use a mouse to delete all of the notes on the clip before
# recording again
#
# However, since the MIDI API on FL Studio doesn't allow control over the piano roll specifically, for now it will only just
# emulate the delete button (which does the same)
elif event.data1 == nihia.buttons.get("CLEAR"):
event.handled = True
ui.delete()
# Loop button (toggles loop recording on/off)
elif event.data1 == nihia.buttons.get("LOOP"):
event.handled = True
transport.globalTransport(midi.FPT_LoopRecord, 1)
# Metronome button
elif event.data1 == nihia.buttons.get("METRO"):
event.handled = True
transport.globalTransport(midi.FPT_Metronome, 1)
# Tempo button
elif event.data1 == nihia.buttons.get("TEMPO"):
event.handled = True
transport.globalTransport(midi.FPT_TapTempo, 1)
# Undo button
elif event.data1 == nihia.buttons.get("UNDO"):
event.handled = True
general.undoUp()
# Redo button
elif event.data1 == nihia.buttons.get("REDO"):
event.handled = True
general.undo()
# Quantize button
# TODO: Not imlpemented yet in FL Studio MIDI API
#
# Instead, it changes between FL windows
# TODO: The code is correctly written, but the ui.showWindow() method has a bug that causes the Piano roll and Browser windows not to
# appear when invoked. It has been said it should be fixed in a future update.
# -----------------------------------------------------------------------------------------------------------------------------------
# if event.data1 == nihia.buttons.get("QUANTIZE"):
# global window
# window += 1
# if window <= 4:
# ui.showWindow(window)
# print("if reached")
# elif window > 4:
# window = 0
# ui.showWindow(window)
# -----------------------------------------------------------------------------------------------------------------------------------
#
# Alternative implementation: Emulate the Fn buttons
elif event.data1 == nihia.buttons.get("QUANTIZE"):
event.handled = True
global window2
window2 += 1
# Normal behaviour if the action ID is between the desired range
if window2 <= 68 and window2 != 67:
transport.globalTransport(window2, 1)
# Skips the 67 value which calls the full screen plugin picker and calls the mixer instead
elif window2 == 67:
window2 += 1
transport.globalTransport(window2, 1)
# Once window value is out of range, it sets it again to the first value in range
elif window2 > 68:
window2 = 64
transport.globalTransport(window2, 1)
# Automation button
# Enables and disables the recording automation events
# TODO: Not implemented yet in FL Studio MIDI API
#
# Instead, it shows the full-screen plugin browser
elif event.data1 == nihia.buttons.get("AUTO"):
event.handled = True
transport.globalTransport(midi.FPT_F8, 1)
# Mute button - A-Series
elif event.data1 == nihia.buttons.get("MUTE_SELECTED"):
event.handled = True
mixer.muteTrack(mixer.trackNumber())
# Solo button - A-Series
elif event.data1 == nihia.buttons.get("SOLO_SELECTED"):
event.handled = True
mixer.soloTrack(mixer.trackNumber())
# Mute button - S-Series
elif event.data1 == nihia.buttons.get("MUTE"):
event.handled = True
mixerMuteSoloHandler("MUTE", event.data2, mixer.trackNumber())
# Solo button - S-Series
elif event.data1 == nihia.buttons.get("SOLO"):
event.handled = True
mixerMuteSoloHandler("SOLO", event.data2, mixer.trackNumber())
# 4D Encoder +
elif event.data1 == nihia.buttons.get(
"ENCODER_GENERAL") and event.data2 == nihia.buttons.get("PLUS"):
event.handled = True
# Mixer navigation (right)
if ui.getFocused(midi.widMixer) == True:
ui.right()
# Playback jogging
elif (ui.getFocused(midi.widPianoRoll) == True) or (ui.getFocused(
midi.widPlaylist) == True):
transport.setSongPos(
transport.getSongPos(midi.SONGLENGTH_S) + 1, midi.SONGLENGTH_S)
# General navigation
else:
ui.down()
# 4D Encoder -
elif event.data1 == nihia.buttons.get(
"ENCODER_GENERAL") and event.data2 == nihia.buttons.get("MINUS"):
event.handled = True
# Mixer navigation
if ui.getFocused(midi.widMixer) == True:
ui.left()
elif (ui.getFocused(midi.widPianoRoll) == True) or (ui.getFocused(
midi.widPlaylist) == True):
transport.setSongPos(
transport.getSongPos(midi.SONGLENGTH_S) - 1, midi.SONGLENGTH_S)
# General navigation
else:
ui.up()
# 4D Encoder + (selected track volume)
elif event.data1 == nihia.buttons.get(
"ENCODER_VOLUME_SELECTED") and event.data2 == nihia.buttons.get(
"PLUS"):
event.handled = True
mixer.setTrackVolume(mixer.trackNumber(),
mixer.getTrackVolume(mixer.trackNumber()) + 0.01)
# 4D Encoder - (selected track volume)
elif event.data1 == nihia.buttons.get(
"ENCODER_VOLUME_SELECTED") and event.data2 == nihia.buttons.get(
"MINUS"):
event.handled = True
mixer.setTrackVolume(mixer.trackNumber(),
mixer.getTrackVolume(mixer.trackNumber()) - 0.01)
# 4D Encoder + (selected track pan)
elif event.data1 == nihia.buttons.get(
"ENCODER_PAN_SELECTED") and event.data2 == nihia.buttons.get(
"PLUS"):
event.handled = True
mixer.setTrackPan(mixer.trackNumber(),
mixer.getTrackPan(mixer.trackNumber()) + 0.01)
# 4D Encoder + (selected track pan)
elif event.data1 == nihia.buttons.get(
"ENCODER_PAN_SELECTED") and event.data2 == nihia.buttons.get(
"MINUS"):
event.handled = True
mixer.setTrackPan(mixer.trackNumber(),
mixer.getTrackPan(mixer.trackNumber()) - 0.01)
# 4D Encoder up
elif event.data1 == encoderHandler(
"Y") and event.data2 == nihia.buttons.get("UP"):
event.handled = True
ui.up()
# 4D Encoder down
elif event.data1 == encoderHandler(
"Y") and event.data2 == nihia.buttons.get("DOWN"):
event.handled = True
ui.down()
# 4D Encoder (using FPT because ui.left doesn't work on the playlist)
elif event.data1 == encoderHandler(
"X") and event.data2 == nihia.buttons.get("LEFT"):
event.handled = True
if ui.getFocused(midi.widMixer) == True:
# This one doesn't move the mixer view as you get to the border
# ----------------------------------------------------
# mixer.setTrackNumber(mixer.trackNumber() - 1)
# ----------------------------------------------------
ui.left()
else:
ui.left()
# 4D Encoder (using FPT because ui.right doesn't work on the playlist)
elif event.data1 == encoderHandler(
"X") and event.data2 == nihia.buttons.get("RIGHT"):
event.handled = True
if ui.getFocused(midi.widMixer) == True:
# This one doesn't move the mixer view as you get to the border
# ----------------------------------------------------
# mixer.setTrackNumber(mixer.trackNumber() + 1)
# ----------------------------------------------------
ui.right()
else:
ui.right()
# 4D Encoder button
elif event.data1 == nihia.buttons.get("ENCODER_BUTTON"):
event.handled = True
ui.enter()
# 4D Encoder button (shifted)
elif event.data1 == nihia.buttons.get("ENCODER_BUTTON_SHIFTED"):
event.handled = True
transport.globalTransport(midi.FPT_Menu, 1)
# Knobs
# Normal knobs - increase values
elif event.data1 == nihia.knobs.get(
"KNOB_1A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(0, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_2A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(1, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_3A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(2, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_4A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(3, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_5A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(4, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_6A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(5, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_7A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(6, "VOLUME", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_8A") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(7, "VOLUME", "INCREASE", mixer.trackNumber())
# Normal knobs - decrease values
elif event.data1 == nihia.knobs.get(
"KNOB_1A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(0, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_2A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(1, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_3A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(2, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_4A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(3, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_5A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(4, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_6A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(5, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_7A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(6, "VOLUME", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_8A") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(7, "VOLUME", "DECREASE", mixer.trackNumber())
# Shifted knobs - increase values
elif event.data1 == nihia.knobs.get(
"KNOB_1B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(0, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_2B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(1, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_3B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(2, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_4B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(3, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_5B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(4, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_6B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
adjustMixer(5, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_7B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(6, "PAN", "INCREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_8B") and event.data2 == nihia.knobs.get("INCREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(7, "PAN", "INCREASE", mixer.trackNumber())
# Shifted knobs - decrease values
elif event.data1 == nihia.knobs.get(
"KNOB_1B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(0, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_2B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(1, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_3B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(2, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_4B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(3, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_5B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(4, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_6B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
adjustMixer(5, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_7B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(6, "PAN", "DECREASE", mixer.trackNumber())
elif event.data1 == nihia.knobs.get(
"KNOB_8B") and event.data2 == nihia.knobs.get("DECREASE"):
event.handled = True
# Handles track group 15 exception
if math.trunc(1 / 8 * mixer.trackNumber()) == 15:
return
else:
adjustMixer(7, "PAN", "DECREASE", mixer.trackNumber())
def OnGlobalSave(self, event):
debug.log('OnGlobalSave', 'Dispatched', event=event)
transport.setLoopMode()
def switch_moment(event):
"""handles momentary witch midi events"""
if event.data1 == button["pad_mode_toggle"]: # This Rotates through pad modes - standard, step sequencer, pad to channel
Switch.mode_toggle += 1
if Switch.mode_toggle == 4:
Switch.mode_toggle = 0
print('Pad Mode: ' + mode[Switch.mode_toggle])
ui.setHintMsg(mode[Switch.mode_toggle])
elif event.midiId == 224: # pitch wheel
Switch.pitch_num = event.data2
if Switch.shift_status == True:
print(data.notes_list[int(mapvalues(Switch.pitch_num, 0, 11, 0, 244))])
elif event.data1 == button["play"]:
transport.start()
event.handled = True
elif event.data1 == button["offset_range"]:
Switch.offset_iter += 1
if Switch.offset_iter == 2: # 2 here will limit to 32 steps, knobs. Changing to 4 will allow up to 64 steps, knobs.
Switch.offset_iter = 0
ui.setHintMsg("Offset Range: " + str(Switch.offset_iter))
elif event.data1 == button["stop"]:
print('Stop')
transport.stop()
event.handled = True
elif event.data1 == button["record"]:
print('Record')
transport.record()
event.handled = True
elif event.data1 == button["pattern_down"]:
if ui.getFocused(5):
print("Previous Preset")
ui.previous()
else:
print('Pattern Down')
transport.globalTransport(midi.FPT_PatternJog, -1)
event.handled = True
elif event.data1 == button["pattern_up"]:
if ui.getFocused(5):
print("Next Preset")
ui.next()
else:
print('Pattern Up')
transport.globalTransport(midi.FPT_PatternJog, 1)
event.handled = True
# Set mod wheel to control channels when channels focused and tracks when mixer
elif event.data1 == button["mod_wheel"]:
if ui.getFocused(0):
mixer.setTrackNumber(int(mapvalues(event.data2, 0, 64, 0, 127)))
ui.scrollWindow(midi.widMixer, mixer.trackNumber())
elif ui.getFocused(1):
print("Channel Number: " + str(channels.selectedChannel()))
channels.selectOneChannel(int(round(mapvalues(event.data2, channels.channelCount()-1, 0, 0, 127), 0)))
elif event.data1 == 72:
print(channels.getChannelColor(channels.selectedChannel()))
Switch.color_num += 1
if Switch.color_num == len(colors):
Switch.color_num = 0
if ui.getFocused(1):
channels.setChannelColor(channels.selectedChannel(), colors[Switch.color_num])
elif ui.getFocused(0):
mixer.setTrackColor(mixer.trackNumber(), colors[Switch.color_num])
event.handled = True
elif event.data1 == button["enter"]:
if ui.getFocused(4):
print("Select Browser Item")
ui.selectBrowserMenuItem()
event.handled = True
elif ui.getFocused(1):
print("Mute Channel")
channels.muteChannel(channels.selectedChannel())
elif ui.getFocused(0):
print("Mute Track")
mixer.muteTrack(mixer.trackNumber())
else:
print('enter')
ui.enter()
event.handled = True
elif event.data1 in range(59, 64) and config.PATTERN_JUMP_ON: # Sets jump to pattern
patterns.jumpToPattern(event.data1 - 58)
event.handled = True
elif event.data1 in range(75, 80) and config.PATTERN_JUMP_ON:
patterns.jumpToPattern(event.data1 - 69)
event.handled = True
elif event.data1 == button["solo"]:
print('Solo')
if ui.getFocused(0):
mixer.soloTrack(mixer.trackNumber())
elif ui.getFocused(1):
channels.soloChannel(channels.selectedChannel())
elif event.data1 == button["view_plugin_picker"]:
print('View Plugin Picker')
transport.globalTransport(midi.FPT_F8, 67)
event.handled = True
elif event.data1 == button["song_mode_toggle"]:
print('Toggle Song and Pattern Mode')
transport.setLoopMode()
event.handled = True
elif event.data1 == button["view_playlist"]:
print('View Playlist')
transport.globalTransport(midi.FPT_F5, 65)
event.handled = True
elif event.data1 == button["view_piano_roll"]:
print('View Piano Roll')
transport.globalTransport(midi.FPT_F7, 66)
event.handled = True
elif event.data1 == button["view_channel_rack"]:
print('View Channel Rack')
transport.globalTransport(midi.FPT_F6, 65)
event.handled = True
elif event.data1 == button["view_mixer"]:
print('View Mixer')
transport.globalTransport(midi.FPT_F9, 68)
event.handled = True
# Toggle through step parameter options - pitch, pan etc. No Shift control right now.
elif event.data1 == button["step_parameter"]:
if ui.getFocused(1) and Switch.mode_toggle == 1:
print('Toggle Step Parameter')
Switch.parameter += 1
if Switch.parameter == 7:
Switch.parameter = 0
print(Switch.parameter)
ui.setHintMsg(parameters[Switch.parameter])
elif ui.getFocused(0):
Switch.mixer_num += 1
if Switch.mixer_num == 2:
Switch.mixer_num = 0
print('Mixer Mode: ' + str(Switch.mixer_num))
ui.setHintMsg(mixer_choice[Switch.mixer_num])
event.handled = True
elif event.data1 == button["open_channel_sampler"]:
print('Open Sampler Channel')
channels.showCSForm(channels.channelNumber(), -1)
event.handled = True
elif event.data1 == button["left"]:
print('Left')
ui.left()
event.handled = True
elif event.data1 == button["down"]:
print('Down')
ui.down()
event.handled = True
elif event.data1 == button["right"]:
print('Right')
ui.right()
event.handled = True
elif event.data1 == button["save"]:
print('Save')
transport.globalTransport(midi.FPT_Save, 92)
# If mixer is open and mute mode selected, top row will mute respective track
elif event.data1 == button["undo"]:
print('Undo')
transport.globalTransport(midi.FPT_Undo, 20)
device.midiOutMsg(144, 1, 63, 80)
event.handled = True
elif event.data1 == button["escape"]:
print('Escape')
ui.escape()
event.handled = True
elif event.data1 == button["up"]:
print('Up')
ui.up()
event.handled = True
elif event.data1 == button["rotate_window"]:
print('Rotate Window')
ui.nextWindow()
event.handled = True
elif event.data1 == button["browser"]:
print('Browser')
if Switch.shift_status == False:
if ui.getFocused(4):
ui.hideWindow(4)
event.handled = True
else:
ui.showWindow(4)
ui.setFocused(4)
event.handled = True
elif event.data1 == button["step_rec"]:
if ui.getFocused(0):
mixer.armTrack(mixer.trackNumber())
print("Toggle Track Rec")
else:
transport.globalTransport(midi.FPT_StepEdit, 114)
print('Step Record')
event.handled = True
elif event.data1 == button["quantize"]:
print('quantize')
channels.quickQuantize(channels.channelNumber())
event.handled = True
elif event.data1 == button["link_chan"]:
print('link channel')
mixer.linkTrackToChannel(0)
elif event.data1 == button["rand_steps"]:
print("Random")
print(f'Pitch Bend: {event.pitchBend}')
for i in range(patterns.getPatternLength(patterns.patternNumber())):
channels.setGridBit(channels.channelNumber(), i, 0)
for z in range (patterns.getPatternLength(patterns.patternNumber())):
y = num_gen()
if y > ( Switch.pitch_num * 516):
channels.setGridBit(channels.channelNumber(), z, 1)
else:
pass
event.handled = True
elif event.data1 == button["rand_notes"]:
print("Randomize Notes")
Switch.note_gen()
event.handled = True
def OnMidiMsg(self, event):
print("On Midi Msg")
#print("CC: ", event.controlNum, " Value: ", event.controlVal, " Chan: ", event.midiChan)
i = mixer.trackNumber()
if (event.midiChan == self.CHN.KNOB):
event.handled = False
if event.controlNum == self.KNOB.VOL:
sVol = self.scaleValue(event.controlVal, 127, 1)
mixer.setTrackVolume(mixer.trackNumber(), sVol)
event.handled = True
if event.controlNum == self.KNOB.PAN:
sPan = (self.scaleValue(event.controlVal, 127, 2) - 1)
if (abs(sPan) < 0.008):
sPan = 0
mixer.setTrackPan(mixer.trackNumber(), sPan)
event.handled = True
elif (event.midiChan == self.CHN.BTN):
event.handled = False
if (event.controlNum == self.BTN.PLAY) & (event.controlVal == 127):
transport.start()
event.handled = True
if (event.controlNum == self.BTN.STOP) & (event.controlVal == 127):
transport.stop()
event.handled = True
if (event.controlNum == self.BTN.RECORD) & (event.controlVal
== 127):
transport.record()
event.handled = True
if (event.controlNum == self.BTN.LOOP_MODE) & (event.controlVal
== 127):
transport.setLoopMode()
event.handled = True
if (event.controlNum == self.BTN.MUTE) & (event.controlVal == 127):
mixer.enableTrack(i)
event.handled = True
if (event.controlNum == self.BTN.SOLO) & (event.controlVal == 127):
mixer.soloTrack(i)
event.handled = True
if (event.controlNum == self.BTN.TRACK_ARM) & (event.controlVal
== 127):
mixer.armTrack(i)
event.handled = True
else:
event.handled = False
def OnMidiMsg(self, event):
event.handled = False
# FOR PRINTING DATA ON SCRIPT OUTPUT
print("status: {}, port: {}, midiId: {}, data1: {}, data2: {}".format(
event.status, event.port, event.midiId, event.data1, event.data2))
# CONTROL CHANGE EVENT FOR BUTTONS OF MIDI
if event.midiId == midi.MIDI_CONTROLCHANGE:
if event.data2 > 0:
if event.data1 == Play:
print('Playback')
transport.start()
ui.setHintMsg("Play/Pause")
event.handled = True
elif event.data1 == Record:
print('Record')
transport.record()
ui.setHintMsg("Record")
event.handled = True
elif event.data1 == Stop:
print('Stop')
transport.stop()
ui.setHintMsg("Stop")
event.handled = True
elif event.data1 == ToggleLoop:
print('Toggle Loop')
transport.setLoopMode()
ui.setHintMsg("Pattern/Song")
event.handled = True
elif event.data1 == Left:
print('Previous Tab')
transport.globalTransport(midi.FPT_WindowJog, -1)
ui.setHintMsg("Previous Tab")
event.handled = True
elif event.data1 == Right:
print('Next Tab')
transport.globalTransport(midi.FPT_WindowJog, 1)
ui.setHintMsg("Next Tab")
event.handled = True
elif event.data1 == Up:
print('Undo Up')
general.undoUp()
ui.setHintMsg("Undo Up")
event.handled = True
elif event.data1 == Down:
print('Undo Down/ReDo')
general.restoreUndo()
ui.setHintMsg("Undo Down/ReDo")
event.handled = True
elif event.data1 in Knobs:
mixer.setTrackVolume(
mixer.trackNumber() + Knobs.index(event.data1),
event.data2 / 127)
event.handled = True
#MIDI NOTE ON/OFF FOR NOTE EVENTS
elif event.midiId == midi.MIDI_NOTEON:
if (event.pmeFlags & midi.PME_System != 0):
if event.data1 == Playlist:
print('Playlist')
transport.globalTransport(midi.FPT_F5, 1)
ui.setHintMsg("Playlist")
event.handled = True
elif event.data1 == ChannelRack:
print('ChannelRack')
transport.globalTransport(midi.FPT_F6, 1)
ui.setHintMsg("ChannelRack")
event.handled = True
elif event.data1 == PianoRoll:
print('PianoRoll')
transport.globalTransport(midi.FPT_F7, 1)
ui.setHintMsg("PianoRoll")
event.handled = True
elif event.data1 == Mixer:
print('Mixer')
transport.globalTransport(midi.FPT_F9, 1)
ui.setHintMsg("Mixer")
event.handled = True
elif event.data1 == Previous:
print('Previous')
ui.previous()
ui.setHintMsg("Previous")
event.handled = True
elif event.data1 == Next:
print('Next')
ui.next()
ui.setHintMsg("Next")
event.handled = True
elif event.data1 == Mute:
print('Mute')
channels.muteChannel(channels.channelNumber())
ui.setHintMsg("Mute")
event.handled = True
elif event.data1 == Solo:
print('Solo')
channels.soloChannel(channels.channelNumber())
ui.setHintMsg("Solo")
event.handled = True
elif event.data1 == PatternUp:
print('Pattern Up')
transport.globalTransport(midi.FPT_PatternJog, -1)
ui.setHintMsg("Pattern Up")
event.handled = True
elif event.data1 == PatternDown:
print('Pattern Down')
transport.globalTransport(midi.FPT_PatternJog, 1)
ui.setHintMsg("Pattern Down")
event.handled = True
elif event.data1 == Overdub:
print('Overdub')
transport.globalTransport(midi.FPT_Overdub, 1)
ui.setHintMsg("Overdub")
event.handled = True
elif event.data1 == LoopRecord:
print('Loop Record')
transport.globalTransport(midi.FPT_LoopRecord, 1)
ui.setHintMsg("Loop Record")
event.handled = True
elif event.data1 == SnapUp:
print('Snap -1')
transport.globalTransport(midi.FPT_SnapMode, -1)
ui.setHintMsg("Snap -1")
event.handled = True
elif event.data1 == SnapDown:
print('Snap +1')
transport.globalTransport(midi.FPT_SnapMode, 1)
ui.setHintMsg("Snap +1")
event.handled = True
elif event.data1 == TapTempo:
print('Tap Tempo')
transport.globalTransport(midi.FPT_TapTempo, 1)
ui.setHintMsg("Tap Tempo")
event.handled = True
elif event.data1 == Metro:
print('Metronome')
transport.globalTransport(midi.FPT_Metronome, 1)
ui.setHintMsg("Metronome")
event.handled = True
def process(command):
command.actions.addProcessor("Default Processor")
#---------------------------------
# Transport functions
#---------------------------------
if command.type == eventconsts.TYPE_TRANSPORT:
# Play-pause: only on lift
if command.id == eventconsts.TRANSPORT_PLAY and command.is_lift:
transport.start()
command.actions.appendAction("Play/Pause Transport")
command.handled = True
# Stop: only on lift
if command.id == eventconsts.TRANSPORT_STOP and command.is_lift:
transport.stop()
command.actions.appendAction("Stop Transport")
command.handled = True
# Loop: only on lift
if command.id == eventconsts.TRANSPORT_LOOP and command.is_lift:
transport.setLoopMode()
command.actions.appendAction("Toggle Loop Mode")
command.handled = True
# Record: only on lift
if command.id == eventconsts.TRANSPORT_RECORD and command.is_lift:
transport.record()
command.actions.appendAction("Toggle Recording")
command.handled = True
# Skip forward: start on press, stop on lift, faster on double press?
if command.id == eventconsts.TRANSPORT_FORWARD:
speed = 1
command.actions.appendAction("Fast Forward")
if command.is_double_click:
speed = 2
command.actions.appendAction("[2x Speed]")
if command.is_lift is False:
transport.continuousMove(speed, 2)
if command.is_lift is True:
transport.continuousMove(speed, 0)
command.actions.appendAction("Stopped")
command.handled = True
# Skip back: start on press, stop on lift, faster on double press?
if command.id == eventconsts.TRANSPORT_BACK:
speed = -1
command.actions.appendAction("Rewind")
if command.is_double_click:
speed = -2
command.actions.appendAction("[2x Speed]")
if command.is_lift is False:
transport.continuousMove(speed, 2)
if command.is_lift is True:
transport.continuousMove(speed, 0)
command.actions.appendAction("Stopped")
command.handled = True
# Next Track: next UI element
if command.id == eventconsts.TRANSPORT_TRACK_NEXT and command.is_lift:
ui.next()
command.actions.appendAction("Next UI Element")
command.handled = True
# Prev Track: prev UI element
if command.id == eventconsts.TRANSPORT_TRACK_PREVIOUS and command.is_lift:
ui.previous()
command.actions.appendAction("Previous UI Element")
command.handled = True
def OnMidiIn(self, event):
print("Output from M32: data 1 =", event.data1, ", data 2 =",
event.data2, ", handled ", event.handled)
u = 0
#tbuttons
if (event.data1 == playb):
transport.start() #play
if (event.data1 == recb):
transport.record() #record
if (event.data1 == stopb):
transport.stop() #stop
if (event.data1 == loopb):
transport.setLoopMode() #loop/pattern mode
if (event.data1 == metrob): # metronome/button self.Clicking
transport.globalTransport(midi.FPT_Metronome, 110)
if (event.data1 == tempob):
transport.stop() #tap tempo
if (event.data1 == quantizeb):
transport.globalTransport(midi.FPT_Snap, 48) #snap toggle
if (event.data1 == squantizeb):
transport.globalTransport(midi.FPT_Snap, 48) #snap toggle
if (event.data1 == srecb):
transport.globalTransport(midi.FPT_CountDown,
115) #countdown before recordin
if (event.data1 == sstopb):
transport.globalTransport(midi.FPT_F12, 71) #clear all windows
if (event.data1 == sstopb):
transport.globalTransport(midi.FPT_F12, 71) #clear all windows
if (event.data1 == undob):
general.undoUp() #undo
if (event.data1 == sundob):
general.undo() #redo
if (event.data1 == squantizeb):
transport.globalTransport(midi.FPT_SnapMode, 49,
event.pmeFlags) #snap toggle
if (event.data1 == tempob):
transport.globalTransport(midi.FPT_TapTempo, 106) #tap tempo
#knobs
if (event.data1 == knobe):
transport.globalTransport(midi.FPT_Enter, 80) #enter
if (event.data1 == knobsp) & (event.data2
== right): #4d encoder spin right
transport.globalTransport(midi.FPT_Jog, 1)
elif (event.data1 == knobsp) & (event.data2
== left): #4d encoder spin left
transport.globalTransport(midi.FPT_Jog, -1)
if (event.data1 == knoblr) & (event.data2
== right): #4d encoder push right
transport.globalTransport(midi.FPT_Right, 1)
elif (event.data1 == knoblr) & (event.data2
== left): #4d encoder push left
transport.globalTransport(midi.FPT_Left, 1)
if (event.data1 == knobud) & (event.data2 == up): #4d encoder push up
transport.globalTransport(midi.FPT_Up, 1)
elif (event.data1 == knobud) & (event.data2
== down): #4d encoder push down
transport.globalTransport(midi.FPT_Down, 1)
def OnMidiIn(self, event):
# print ("Event: {:X} {:X} {:2X} {} {:2X}".format(event.status, event.data1, event.data2, EventNameT[(event.status - 0x80) // 16] + ': '+ utils.GetNoteName(event.data1), int(hex(event.data2), 16)))
# Create output string
output = ""
event.handled = False
global loopDown
global loopInterrupt
# Set has snapped flag
hasSnapped = False
# Process Long Presses:
# Stop Button
if (event.status is 0xB0 and event.data1 is 0x2E):
global stop_PressTime
global stop_LiftTime
# Press - Start timer
if event.data2 is 0x7F:
stop_PressTime = time.perf_counter()
# Lift - Stop timer
elif event.data2 is 0x00:
stop_LiftTime = time.perf_counter()
if (stop_LiftTime - stop_PressTime) >= LONG_PRESS_TIME:
ui.escape()
output += "UI: Escape"
event.handled = True
if event.handled is True:
handleOutput(output)
return
# In popup
if ui.isInPopupMenu() is 1 and loopDown is False:
output += "[In popup menu] "
# Currently this is always inactive?
if event.handled is True:
handleOutput(output)
return
# In Playlist
if ui.getFocused(2) is 1 and loopDown is False:
# Forward Button
if (event.status is 0xB0 and event.data1 is 0x30):
# Press - No action if markers exist
if event.data2 is 0x7F and arrangement.getMarkerName(
0) is not "":
event.handled = True
# Lift - Skip to next marker, only if markers exist
elif event.data2 is 0x00 and arrangement.getMarkerName(
0) is not "":
transport.markerJumpJog(1)
output += "Transport: Jump to next marker"
event.handled = True
# Back Button
if (event.status is 0xB0 and event.data1 is 0x2F):
# Press - No action if markers exist
if event.data2 is 0x7F and arrangement.getMarkerName(
0) is not "":
event.handled = True
# Lift - Skip to previous marker, only if markers exist
elif event.data2 is 0x00 and arrangement.getMarkerName(
0) is not "":
transport.markerJumpJog(-1)
output += "Transport: Jump to previous marker"
event.handled = True
if event.handled is True:
handleOutput(output)
return
# In Mixer
if ui.getFocused(0) is 1 and loopDown is False:
selectedTrack = mixer.trackNumber()
# Record Button
if (event.status is 0xB0 and event.data1 is 0x2C):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Toggle track arm
elif event.data2 is 0x00:
mixer.armTrack(selectedTrack)
if mixer.isTrackArmed(selectedTrack) is 1:
output += "Mixer: Armed track: " + getMixerTrackName(
selectedTrack)
else:
output += "Mixer: Disarmed track: " + getMixerTrackName(
selectedTrack)
event.handled = True
# Forward Button
if (event.status is 0xB0 and event.data1 is 0x30):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Next track
elif event.data2 is 0x00:
ui.next()
output += "Mixer: Selected next track: " + getMixerTrackName(
selectedTrack + 1)
event.handled = True
# Back Button
if (event.status is 0xB0 and event.data1 is 0x2F):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Previous track
elif event.data2 is 0x00:
ui.previous()
output += "Mixer: Selected previous track: " + getMixerTrackName(
selectedTrack - 1)
event.handled = True
# Fader, knob and buttons #9 act on the selected track
# Upper button 9
if (event.status is 0xB0 and
(event.data1 is 0x1F or event.data1 is 0x4B
or event.data1 is 0x73)) or (event.status is 0xB8
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or event.status is 0xB8:
output += mixerToggleSolo(selectedTrack)
event.handled = True
# Lower button 9
if (event.status is 0xB0 and
(event.data1 is 0x29 or event.data1 is 0x54
or event.data1 is 0x7C)) or (event.status is 0xB8
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or event.status is 0xB8:
output += mixerToggleMute(selectedTrack)
event.handled = True
# Fader 9 - Selected volume
if (event.status is 0xB0 and
(event.data1 is 0x0D or event.data1 is 0x38
or event.data1 is 0x5D)) or (event.status is 0xB8
and event.data1 is 0x07):
output += mixerAdjustFader(selectedTrack, event.data2)
event.handled = True
# Knob 9 - Selected pan
if (event.status is 0xB0 and
(event.data1 is 0x16 or event.data1 is 0x42
or event.data1 is 0x6A)) or (event.status is 0xB8
and event.data1 is 0x0A):
output += mixerAdjustPan(selectedTrack, event.data2)
event.handled = True
# Faders, knobs and buttons #1-8 act on tracks 1-8 respectively
# Upper button 1
if (event.status is 0xB0 and
(event.data1 is 0x17 or event.data1 is 0x43
or event.data1 is 0x6B)) or (event.status is 0xB0
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB0
and event.data1 is 0x10
and event.data2 is 0x7F):
output += mixerToggleSolo(1)
event.handled = True
# Lower button 1
if (event.status is 0xB0 and
(event.data1 is 0x21 or event.data1 is 0x4C
or event.data1 is 0x74)) or (event.status is 0xB0
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB0
and event.data1 is 0x11
and event.data2 is 0x7F):
output += mixerToggleMute(1)
event.handled = True
# Upper button 2
if (event.status is 0xB0 and
(event.data1 is 0x18 or event.data1 is 0x44
or event.data1 is 0x6C)) or (event.status is 0xB1
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB1
and event.data1 is 0x10):
output += mixerToggleSolo(2)
event.handled = True
# Lower button 2
if (event.status is 0xB0 and
(event.data1 is 0x22 or event.data1 is 0x4D
or event.data1 is 0x75)) or (event.status is 0xB1
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB2
and event.data1 is 0x11):
output += mixerToggleMute(2)
event.handled = True
# Upper button 3
if (event.status is 0xB0 and
(event.data1 is 0x19 or event.data1 is 0x45
or event.data1 is 0x6D)) or (event.status is 0xB2
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB2
and event.data1 is 0x10):
output += mixerToggleSolo(3)
event.handled = True
# Lower button 3
if (event.status is 0xB0 and
(event.data1 is 0x23 or event.data1 is 0x4E
or event.data1 is 0x76)) or (event.status is 0xB2
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB2
and event.data1 is 0x11):
output += mixerToggleMute(3)
event.handled = True
# Upper button 4
if (event.status is 0xB0 and
(event.data1 is 0x1A or event.data1 is 0x46
or event.data1 is 0x6E)) or (event.status is 0xB3
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB3
and event.data1 is 0x10):
output += mixerToggleSolo(4)
event.handled = True
# Lower button 4
if (event.status is 0xB0 and
(event.data1 is 0x24 or event.data1 is 0x4F
or event.data1 is 0x77)) or (event.status is 0xB3
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB3
and event.data1 is 0x11):
output += mixerToggleMute(4)
event.handled = True
# Upper button 5
if (event.status is 0xB0 and
(event.data1 is 0x1B or event.data1 is 0x47
or event.data1 is 0x6F)) or (event.status is 0xB4
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB4
and event.data1 is 0x10):
output += mixerToggleSolo(5)
event.handled = True
# Lower button 5
if (event.status is 0xB0 and
(event.data1 is 0x25 or event.data1 is 0x50
or event.data1 is 0x78)) or (event.status is 0xB4
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB4
and event.data1 is 0x11):
output += mixerToggleMute(5)
event.handled = True
# Upper button 6
if (event.status is 0xB0 and
(event.data1 is 0x1C or event.data1 is 0x48
or event.data1 is 0x70)) or (event.status is 0xB5
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB5
and event.data1 is 0x10):
output += mixerToggleSolo(6)
event.handled = True
# Lower button 6
if (event.status is 0xB0 and
(event.data1 is 0x26 or event.data1 is 0x51
or event.data1 is 0x79)) or (event.status is 0xB5
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB5
and event.data1 is 0x11):
output += mixerToggleMute(6)
event.handled = True
# Upper button 7
if (event.status is 0xB0 and
(event.data1 is 0x1D or event.data1 is 0x49
or event.data1 is 0x71)) or (event.status is 0xB6
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB6
and event.data1 is 0x10):
output += mixerToggleSolo(7)
event.handled = True
# Lower button 7
if (event.status is 0xB0 and
(event.data1 is 0x27 or event.data1 is 0x52
or event.data1 is 0x7A)) or (event.status is 0xB6
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB6
and event.data1 is 0x11):
output += mixerToggleMute(7)
event.handled = True
# Upper button 8
if (event.status is 0xB0 and
(event.data1 is 0x1E or event.data1 is 0x4A
or event.data1 is 0x72)) or (event.status is 0xB7
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB7
and event.data1 is 0x10):
output += mixerToggleSolo(8)
event.handled = True
# Lower button 8
if (event.status is 0xB0 and
(event.data1 is 0x28 or event.data1 is 0x53
or event.data1 is 0x7B)) or (event.status is 0xB7
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or (event.status is 0xB7
and event.data1 is 0x11):
output += mixerToggleMute(8)
event.handled = True
# Fader 1 - Track 1 volume
if event.status is 0xB0 and (event.data1 is 0x02
or event.data1 is 0x2A
or event.data1 is 0x55
or event.data1 is 0x07):
output += mixerAdjustFader(1, event.data2)
event.handled = True
# Knob 1 - Track 1 pan
if event.status is 0xB0 and (event.data1 is 0x0E
or event.data1 is 0x39
or event.data1 is 0x5E
or event.data1 is 0x0A):
output += mixerAdjustPan(1, event.data2)
event.handled = True
# Fader 2 - Track 2 volume
if (event.status is 0xB0 and
(event.data1 is 0x03 or event.data1 is 0x2B
or event.data1 is 0x56)) or (event.status is 0xB1
and event.data1 is 0x07):
output += mixerAdjustFader(2, event.data2)
event.handled = True
# Knob 2 - Track 2 pan
if (event.status is 0xB0 and
(event.data1 is 0x0F or event.data1 is 0x3A
or event.data1 is 0x5F)) or (event.status is 0xB1
and event.data1 is 0x0A):
output += mixerAdjustPan(2, event.data2)
event.handled = True
# Fader 3 - Track 3 volume
if (event.status is 0xB0 and
(event.data1 is 0x04 or event.data1 is 0x32
or event.data1 is 0x57)) or (event.status is 0xB2
and event.data1 is 0x07):
output += mixerAdjustFader(3, event.data2)
event.handled = True
# Knob 3 - Track 3 pan
if ((event.status is 0xB0 and
(event.data1 is 0x10 or event.data1 is 0x3B
or event.data1 is 0x60)) or
(event.status is 0xB2
and event.data1 is 0x0A)) and event.handled is False:
output += mixerAdjustPan(3, event.data2)
event.handled = True
# Fader 4 - Track 4 volume
if (event.status is 0xB0 and
(event.data1 is 0x05 or event.data1 is 0x33
or event.data1 is 0x58)) or (event.status is 0xB3
and event.data1 is 0x07):
output += mixerAdjustFader(4, event.data2)
event.handled = True
# Knob 4 - Track 4 pan
if ((event.status is 0xB0 and
(event.data1 is 0x11 or event.data1 is 0x3C
or event.data1 is 0x61)) or
(event.status is 0xB3
and event.data1 is 0x0A)) and event.handled is False:
output += mixerAdjustPan(4, event.data2)
event.handled = True
# Fader 5 - Track 5 volume
if (event.status is 0xB0 and
(event.data1 is 0x06 or event.data1 is 0x34
or event.data1 is 0x59)) or (event.status is 0xB4
and event.data1 is 0x07):
output += mixerAdjustFader(5, event.data2)
event.handled = True
# Knob 5 - Track 5 pan
if (event.status is 0xB0 and
(event.data1 is 0x12 or event.data1 is 0x3D
or event.data1 is 0x66)) or (event.status is 0xB4
and event.data1 is 0x0A):
output += mixerAdjustPan(5, event.data2)
event.handled = True
# Fader 6 - Track 6 volume
if (event.status is 0xB0 and
(event.data1 is 0x08 or event.data1 is 0x35
or event.data1 is 0x5A)) or (event.status is 0xB5
and event.data1 is 0x07):
output += mixerAdjustFader(1, event.data2)
event.handled = True
# Knob 6 - Track 6 pan
if (event.status is 0xB0 and
(event.data1 is 0x13 or event.data1 is 0x3E
or event.data1 is 0x67)) or (event.status is 0xB5
and event.data1 is 0x0A):
output += mixerAdjustPan(6, event.data2)
event.handled = True
# Fader 7 - Track 7 volume
if (event.status is 0xB0 and
(event.data1 is 0x09 or event.data1 is 0x36
or event.data1 is 0x5B)) or (event.status is 0xB6
and event.data1 is 0x07):
output += mixerAdjustFader(1, event.data2)
event.handled = True
# Knob 7 - Track 7 pan
if (event.status is 0xB0 and
(event.data1 is 0x14 or event.data1 is 0x3F
or event.data1 is 0x68)) or (event.status is 0xB6
and event.data1 is 0x0A):
output += mixerAdjustPan(7, event.data2)
event.handled = True
# Fader 8 - Track 8 volume
if (event.status is 0xB0 and
(event.data1 is 0x0C or event.data1 is 0x37
or event.data1 is 0x5C)) or (event.status is 0xB7
and event.data1 is 0x07):
output += mixerAdjustFader(1, event.data2)
event.handled = True
# Knob 8 - Track 8 pan
if (event.status is 0xB0 and
(event.data1 is 0x15 or event.data1 is 0x41
or event.data1 is 0x69)) or (event.status is 0xB7
and event.data1 is 0x0A):
output += mixerAdjustPan(8, event.data2)
event.handled = True
if event.handled is True:
handleOutput(output)
return
# In Channel rack
if ui.getFocused(1) is 1 and loopDown is False:
selectedChannel = channels.channelNumber()
# Forward Button
if (event.status is 0xB0 and event.data1 is 0x30):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Next track
elif event.data2 is 0x00:
ui.next()
mixerTrackSelect(channels.channelNumber())
output += "Channel rack: Select next track: " + getChannelName(
channels.channelNumber())
event.handled = True
# Back Button
if (event.status is 0xB0 and event.data1 is 0x2F):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Previous track
elif event.data2 is 0x00:
ui.previous()
mixerTrackSelect(channels.channelNumber())
output += "Channel rack: Select previous track: " + getChannelName(
channels.channelNumber())
event.handled = True
# Fader, knob and buttons #9 act on the selected channel
# Upper button 9
if (event.status is 0xB0 and
(event.data1 is 0x1F or event.data1 is 0x4B
or event.data1 is 0x73)) or (event.status is 0xB8
and event.data1 is 0x10):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Solo channel (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or event.status is 0xB8:
output += channelToggleSolo(selectedChannel)
event.handled = True
# Lower button 9
if (event.status is 0xB0 and
(event.data1 is 0x29 or event.data1 is 0x54
or event.data1 is 0x7C)) or (event.status is 0xB8
and event.data1 is 0x11):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Mute track (in scene 4, the buttons toggle automatically)
if event.data2 is 0x00 or event.status is 0xB8:
output += channelToggleMute(selectedChannel)
event.handled = True
# Fader 9 - Selected volume
if (event.status is 0xB0 and
(event.data1 is 0x0D or event.data1 is 0x38
or event.data1 is 0x5D)) or (event.status is 0xB8
and event.data1 is 0x07):
output += channelAdjustVolume(selectedChannel, event.data2)
event.handled = True
# Knob 9 - Selected pan
if (event.status is 0xB0 and
(event.data1 is 0x16 or event.data1 is 0x42
or event.data1 is 0x6A)) or (event.status is 0xB8
and event.data1 is 0x0A):
output += channelAdjustPan(selectedChannel, event.data2)
event.handled = True
# Maybe include step editor here (when I figure out lights)
if event.handled is True:
handleOutput(output)
return
# In Browser
if ui.getFocused(4) is 1 and loopDown is False:
# Play Button
if (event.status is 0xB0 and event.data1 is 0x2D):
# Press - Play sample/expand menu
if event.data2 is 0x7F:
ui.next()
ui.previous()
ui.right()
output += "Browser: Select"
event.handled = True
# Lift - No action
elif event.data2 is 0x00:
event.handled = True
# Forward Button
if (event.status is 0xB0 and event.data1 is 0x30):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Next item
elif event.data2 is 0x00:
ui.next()
output += "Browser: Next"
event.handled = True
# Back Button
if (event.status is 0xB0 and event.data1 is 0x2F):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Previous item
elif event.data2 is 0x00:
ui.previous()
output += "Browser: Previous"
event.handled = True
# Stop Button
if (event.status is 0xB0 and event.data1 is 0x2E):
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Collapse menu
elif event.data2 is 0x00:
ui.left()
output += "Browser: Collapse"
event.handled = True
if event.handled is True:
handleOutput(output)
return
# Default Actions:
# Play Button
if (event.status is 0xB0 and event.data1 is 0x2D):
loopInterrupt = True
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Play/Pause
elif event.data2 is 0x00:
transport.start()
if transport.isPlaying() is 1: output += "Transport: Play"
else: output += "Transport: Pause"
event.handled = True
# Stop Button
if (event.status is 0xB0 and event.data1 is 0x2E):
loopInterrupt = True
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Stop
elif event.data2 is 0x00:
transport.stop()
output += "Transport: Stop"
event.handled = True
# Forward Button
if (event.status is 0xB0 and event.data1 is 0x30):
loopInterrupt = True
# Press - Start FF
if event.data2 is 0x7F:
transport.fastForward(2)
event.handled = True
output += "Transport: Fast Forward: Begin"
# Lift - End FF
elif event.data2 is 0x00:
transport.fastForward(0)
output += "Transport: Fast Forward: End"
event.handled = True
# Back Button
if (event.status is 0xB0 and event.data1 is 0x2F):
# Press - Start Rew
if event.data2 is 0x7F:
transport.rewind(2)
event.handled = True
output += "Transport: Rewind: Begin"
# Lift - End Rew
elif event.data2 is 0x00:
transport.rewind(0)
output += "Transport: Rewind: End"
event.handled = True
# Record Button
if (event.status is 0xB0 and event.data1 is 0x2C):
loopInterrupt = True
# Press - No action
if event.data2 is 0x7F:
event.handled = True
# Lift - Toggle Recording
elif event.data2 is 0x00:
transport.record()
if transport.isRecording() is 1:
output += "Transport: Recording Enabled"
else:
output += "Transport: Recording Disabled"
event.handled = True
# Loop Button
if (event.status is 0xB0 and event.data1 is 0x31):
# Press - Set Loop flags
if event.data2 is 0x7F:
# Set flags for loop modifier commands
loopDown = True
loopInterrupt = False
event.handled = True
# Lift - Toggle Loop if no action taken
elif event.data2 is 0x00:
event.handled = True
loopDown = False
if loopInterrupt is False:
transport.setLoopMode()
if transport.getLoopMode() is 1:
output += "Transport: Loop Mode: Song"
else:
output += "Transport: Loop Mode: Pattern"
# Scene Change
"""
if event.status is 0xF0:
global scene
scene += 1
if scene is 5:
scene = 1
windowToShow = -1
if scene is 1:
windowToShow = 2 # Playlist
output += "Scene: Playlist"
if scene is 2:
windowToShow = 1 # Channel Rack
output += "Scene: Channel Rack"
if scene is 3:
windowToShow = 3 # Piano roll
output += "Scene: Piano Roll"
if scene is 4:
windowToShow = 0 # Mixer
output += "Scene: Mixer"
ui.showWindow(windowToShow)
event.handled = True
"""
if event.handled is True:
handleOutput(output)
return
# Event not recognised
if event.handled is False:
print("Unknown Event: {:X} {:X} {:2X} {} {:2X}".format(
event.status, event.data1, event.data2,
EventNameT[(event.status - 0x80) // 16] + ': ' +
utils.GetNoteName(event.data1), int(hex(event.data2), 16)))