Exemplo n.º 1
0
    def test_roundtripEmptyAncillary(self):
        """
        L{send1msg} treats an empty ancillary data list the same way it treats
        receiving no argument for the ancillary parameter at all.
        """
        send1msg(self.input.fileno(), "hello, world!", 0, [])

        result = recv1msg(fd=self.output.fileno())
        self.assertEqual(result, ("hello, world!", 0, []))
    def test_roundtripEmptyAncillary(self):
        """
        L{send1msg} treats an empty ancillary data list the same way it treats
        receiving no argument for the ancillary parameter at all.
        """
        send1msg(self.input.fileno(), "hello, world!", 0, [])

        result = recv1msg(fd=self.output.fileno())
        self.assertEqual(result, ("hello, world!", 0, []))
Exemplo n.º 3
0
 def doWrite(self):
     """
     Write some data.
     """
     while self.statusQueue:
         msg = self.statusQueue.pop(0)
         try:
             send1msg(self.fd, msg, 0)
         except SocketError, se:
             if se.errno in (EAGAIN, ENOBUFS):
                 self.statusQueue.insert(0, msg)
                 return
             raise
Exemplo n.º 4
0
 def test_sendmsgTwoAncillaryDoesNotSegfault(self):
     """
     L{sendmsg} with two FDs in two separate ancillary entries
     does not segfault.
     """
     ancillary = [
         (SOL_SOCKET, SCM_RIGHTS, pack("i", self.input.fileno())),
         (SOL_SOCKET, SCM_RIGHTS, pack("i", self.output.fileno())),
     ]
     try:
         send1msg(self.input.fileno(), b"some data", 0, ancillary)
     except error:
         # Ok as long as it doesn't segfault.
         pass
Exemplo n.º 5
0
 def test_flags(self):
     """
     The C{flags} argument to L{send1msg} is passed on to the underlying
     C{sendmsg} call, to affect it in whatever way is defined by those flags.
     """
     # Just exercise one flag with simple, well-known behavior.  MSG_DONTWAIT
     # makes the send a non-blocking call, even if the socket is in blocking
     # mode.  See also test_flags in RecvmsgTestCase
     for i in range(1024):
         try:
             send1msg(self.input.fileno(), "x" * 1024, MSG_DONTWAIT)
         except error, e:
             self.assertEqual(e.args[0], errno.EAGAIN)
             break
Exemplo n.º 6
0
 def test_flags(self):
     """
     The C{flags} argument to L{send1msg} is passed on to the underlying
     C{sendmsg} call, to affect it in whatever way is defined by those flags.
     """
     # Just exercise one flag with simple, well-known behavior.  MSG_DONTWAIT
     # makes the send a non-blocking call, even if the socket is in blocking
     # mode.  See also test_flags in RecvmsgTests
     for i in range(1024):
         try:
             send1msg(self.input.fileno(), "x" * 1024, MSG_DONTWAIT)
         except error, e:
             self.assertEqual(e.args[0], errno.EAGAIN)
             break
Exemplo n.º 7
0
def main():
    foo, bar = socketpair()
    sent = send1msg(foo.fileno(), "Hello, world")
    print "Sent", sent, "bytes"
    (received, flags, ancillary) = recv1msg(bar.fileno(), 1024)
    print "Received", repr(received)
    print "Extra stuff, boring in this case", flags, ancillary
Exemplo n.º 8
0
def main():
    foo, bar = socketpair()
    sent = send1msg(foo.fileno(), "Hello, world")
    print "Sent", sent, "bytes"
    (received, flags, ancillary) = recv1msg(bar.fileno(), 1024)
    print "Received", repr(received)
    print "Extra stuff, boring in this case", flags, ancillary
Exemplo n.º 9
0
    def test_sendSubProcessFD(self):
        """
        Calling L{sendsmsg} with SOL_SOCKET, SCM_RIGHTS, and a platform-endian
        packed file descriptor number should send that file descriptor to a
        different process, where it can be retrieved by using L{recv1msg}.
        """
        sspp = self.spawn("pullpipe")
        yield sspp.started
        pipeOut, pipeIn = pipe()
        self.addCleanup(close, pipeOut)

        send1msg(self.input.fileno(), "blonk", 0,
                 [(SOL_SOCKET, SCM_RIGHTS, pack("i", pipeIn))])

        close(pipeIn)
        yield sspp.stopped
        self.assertEqual(read(pipeOut, 1024), "Test fixture data: blonk.\n")
        # Make sure that the pipe is actually closed now.
        self.assertEqual(read(pipeOut, 1024), "")
Exemplo n.º 10
0
    def test_roundtrip(self):
        """
        L{recv1msg} will retrieve a message sent via L{send1msg}.
        """
        message = "hello, world!"
        self.assertEqual(len(message), send1msg(self.input.fileno(), message,
                                                0))

        result = recv1msg(fd=self.output.fileno())
        self.assertEqual(result, (message, 0, []))
Exemplo n.º 11
0
 def test_shortsend(self):
     """
     L{send1msg} returns the number of bytes which it was able to send.
     """
     message = "x" * 1024 * 1024
     self.input.setblocking(False)
     sent = send1msg(self.input.fileno(), message)
     # Sanity check - make sure we did fill the send buffer and then some
     self.assertTrue(sent < len(message))
     received = recv1msg(self.output.fileno(), 0, len(message))
     self.assertEqual(len(received[0]), sent)
Exemplo n.º 12
0
def sendfd(socketfd, fd, description):
    """
    Send the given FD to another process via L{send1msg} on the given
    C{AF_UNIX} socket.

    @param socketfd: An C{AF_UNIX} socket, attached to another process waiting
        to receive sockets via the ancillary data mechanism in L{send1msg}.

    @type socketfd: C{int}

    @param fd: A file descriptor to be sent to the other process.

    @type fd: C{int}

    @param description: a string describing the socket that was passed.

    @type description: C{str}
    """
    send1msg(socketfd, description, 0,
             [(SOL_SOCKET, SCM_RIGHTS, pack("i", fd))])
Exemplo n.º 13
0
 def test_shortsend(self):
     """
     L{send1msg} returns the number of bytes which it was able to send.
     """
     message = "x" * 1024 * 1024
     self.input.setblocking(False)
     sent = send1msg(self.input.fileno(), message)
     # Sanity check - make sure we did fill the send buffer and then some
     self.assertTrue(sent < len(message))
     received = recv1msg(self.output.fileno(), 0, len(message))
     self.assertEqual(len(received[0]), sent)
    def test_roundtrip(self):
        """
        L{recv1msg} will retrieve a message sent via L{send1msg}.
        """
        message = "hello, world!"
        self.assertEqual(
            len(message),
            send1msg(self.input.fileno(), message, 0))

        result = recv1msg(fd=self.output.fileno())
        self.assertEqual(result, (message, 0, []))
Exemplo n.º 15
0
    def test_sendSubProcessFD(self):
        """
        Calling L{sendsmsg} with SOL_SOCKET, SCM_RIGHTS, and a platform-endian
        packed file descriptor number should send that file descriptor to a
        different process, where it can be retrieved by using L{recv1msg}.
        """
        sspp = self.spawn("pullpipe")
        yield sspp.started
        pipeOut, pipeIn = pipe()
        self.addCleanup(close, pipeOut)

        send1msg(
            self.input.fileno(), "blonk", 0,
            [(SOL_SOCKET, SCM_RIGHTS, pack("i", pipeIn))])

        close(pipeIn)
        yield sspp.stopped
        self.assertEqual(read(pipeOut, 1024), "Test fixture data: blonk.\n")
        # Make sure that the pipe is actually closed now.
        self.assertEqual(read(pipeOut, 1024), "")
Exemplo n.º 16
0
 def test_shortsend(self):
     """
     L{send1msg} returns the number of bytes which it was able to send.
     """
     message = "x" * 1024 * 1024
     self.input.setblocking(False)
     sent = send1msg(self.input.fileno(), message)
     # Sanity check - make sure the amount of data we sent was less than the
     # message, but not the whole message, as we should have filled the send
     # buffer. This won't work if the send buffer is more than 1MB, though.
     self.assertTrue(sent < len(message))
     received = recv1msg(self.output.fileno(), 0, len(message))
     self.assertEqual(len(received[0]), sent)
 def test_shortsend(self):
     """
     L{send1msg} returns the number of bytes which it was able to send.
     """
     message = "x" * 1024 * 1024
     self.input.setblocking(False)
     sent = send1msg(self.input.fileno(), message)
     # Sanity check - make sure the amount of data we sent was less than the
     # message, but not the whole message, as we should have filled the send
     # buffer. This won't work if the send buffer is more than 1MB, though.
     self.assertTrue(sent < len(message))
     received = recv1msg(self.output.fileno(), 0, len(message))
     self.assertEqual(len(received[0]), sent)
Exemplo n.º 18
0
def test_SetDatafd():
    fd, _fd = socket.socketpair(socket.AF_UNIX, socket.SOCK_DGRAM)
    sock_path = os.getenv('SOCK_PATH')
    cmd_set_data_fd = bytearray([0x00, 0x00, 0x00, 0x10])
    expected_res = bytearray([0x00, 0x00, 0x00, 0x00])
    try:
        fds = array("i")
        fds.append(_fd.fileno())
        ctrlfd = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
        print("Connecting to server at : %s" % sock_path)
        ctrlfd.connect(sock_path)
        print("Sending data fd over ctrl fd...")
        if sys.version_info[0] < 3:
            sendmsg.send1msg(ctrlfd.fileno(), str(cmd_set_data_fd), 0,
                             [(socket.SOL_SOCKET,
                               sendmsg.SCM_RIGHTS,
                               struct.pack("i", _fd.fileno()))])
        else:
            ctrlfd.sendmsg([cmd_set_data_fd],
                           [(socket.SOL_SOCKET, socket.SCM_RIGHTS, fds)])
    except socket.error as e:
        print("SocketError: " + str(e))
        ctrlfd.close()

    buf = ctrlfd.recv(4)
    print("Received bytes.. : %s" % buf)
    if buf:
        caps = bytearray(buf)
        if caps == expected_res:
            return test_ReadPCR10(fd)
        else:
            print("Unexpected reply for CMD_SET_DATA_FD: \n"
                  "  actual: %s\n  expected: %s"
                  % (toString(caps), toString(expected_res)))
            return False
    else:
        print("Null reply from swtpm")
        return False
Exemplo n.º 19
0
def test_SetDatafd():
    fd, _fd = socket.socketpair(socket.AF_UNIX, socket.SOCK_DGRAM)
    sock_path = os.getenv('SOCK_PATH')
    cmd_set_data_fd = bytearray([0x00, 0x00, 0x00, 0x10])
    expected_res = bytearray([0x00, 0x00, 0x00, 0x00])
    try:
        fds = array("i")
        fds.append(_fd.fileno())
        ctrlfd = socket.socket(socket.AF_UNIX, socket.SOCK_STREAM)
        print("Connecting to server at : %s" % sock_path)
        ctrlfd.connect(sock_path)
        print("Sending data fd over ctrl fd...")
        if sys.version_info[0] < 3:
            sendmsg.send1msg(ctrlfd.fileno(), str(cmd_set_data_fd), 0,
                             [(socket.SOL_SOCKET,
                               sendmsg.SCM_RIGHTS,
                               struct.pack("i", _fd.fileno()))])
        else:
            ctrlfd.sendmsg([cmd_set_data_fd],
                           [(socket.SOL_SOCKET, socket.SCM_RIGHTS, fds)])
    except socket.error as e:
        print("SocketError: " + str(e))
        ctrlfd.close()

    buf = ctrlfd.recv(4)
    print("Received bytes.. : %s" % buf)
    if buf:
        caps = bytearray(buf)
        if caps == expected_res:
            return test_ReadPCR10(fd)
        else:
            print("Unexpected reply for CMD_SET_DATA_FD: \n"
                  "  actual: %s\n  expected: %s"
                  % (toString(caps), toString(expected_res)))
            return False
    else:
        print("Null reply from swtpm")
        return False
Exemplo n.º 20
0
def main():
    foo, bar = socketpair()
    reader, writer = pipe()

    # Send a copy of the descriptor.  Notice that there must be at least one
    # byte of normal data passed in.
    sent = send1msg(foo.fileno(), "\x00", 0, [(SOL_SOCKET, SCM_RIGHTS, pack("i", reader))])

    # Receive the copy, including that one byte of normal data.
    data, flags, ancillary = recv1msg(bar.fileno(), 1024)
    duplicate = unpack("i", ancillary[0][2])[0]

    # Demonstrate that the copy works just like the original
    write(writer, "Hello, world")
    print "Read from original (%d): %r" % (reader, read(reader, 6))
    print "Read from duplicate (%d): %r" % (duplicate, read(duplicate, 6))
Exemplo n.º 21
0
def main():
    foo, bar = socketpair()
    reader, writer = pipe()

    # Send a copy of the descriptor.  Notice that there must be at least one
    # byte of normal data passed in.
    sent = send1msg(foo.fileno(), "\x00", 0,
                    [(SOL_SOCKET, SCM_RIGHTS, pack("i", reader))])

    # Receive the copy, including that one byte of normal data.
    data, flags, ancillary = recv1msg(bar.fileno(), 1024)
    duplicate = unpack("i", ancillary[0][2])[0]

    # Demonstrate that the copy works just like the original
    write(writer, "Hello, world")
    print "Read from original (%d): %r" % (reader, read(reader, 6))
    print "Read from duplicate (%d): %r" % (duplicate, read(duplicate, 6))