def grid(pos,
attrs,
strict_axes=False,
strict_grid=False,
grid_precision=0.1,
invert=False):
"""
This program is a high-level encapsulation of all of the gridding typically
used by one of the probe programs.
The default output of this function is:
shotgridind, xaxis, yaxis, zaxis, nx, ny, nz, nreps, nshots
Where shotgridind is an array [nshots, 4]
where each shot entry contains [xind, yind, zind, irep]. These indicies can
then be used to place shot data in the correct grid locations.
pos (array): Position array from the source file [nshots, 3] where the
third dimension is xyz
attrs (dict): Attribute dictionary for the dataset. Used to get probe
origin, etc.
strict_axes: If true, strict axis creation will be used.
strict_grid: If true, strict gridding will be used.
grid_precision (float): If fuzzy gridding is used, values will be rounded
to this precision before sorting into the grid.
invert (bool): If true, returns an 'inverted' version of the shotgridind
array which has size [nx, ny, nz, nreps], and each value in the array is
the shot number that belongs there. This is useful when you need to load
all reps at once, eg. if you need to average Langmuir traces prior to
the full analysis phase.
"""
req_keys = []
#Determine the motion format: default is cartesian
if 'motion_format' in attrs.keys():
motion_format = attrs['motion_format'][0]
else:
attrs['motion_format'] = 'cartesian'
#Require any necessary keywords
if motion_format == 'cartesian':
pass
elif motion_format == 'fixed_pivot':
req_keys = req_keys + ['rot_center_x', 'rot_center_y', 'rot_center_z']
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#Set default values for keywords if they aren't present
#origin is the location of the probe's origin in the main coordinates system
origin = np.zeros(3)
origin_keys = ['probe_origin_x', 'probe_origin_y', 'probe_origin_z']
for i, key in enumerate(origin_keys):
if key in attrs.keys():
origin[i] = attrs[key][0]
else:
origin[i] = 0.0
#probe_ax pol is the polarization of the probe's axes relative to the main
#coordinates. 1 means they are aligned, -1 means anti-aligned.
ax_pol = np.ones(3)
ax_pol_keys = ['ax_pol_x', 'ax_pol_y', 'ax_pol_z']
for i, key in enumerate(ax_pol_keys):
if key in attrs.keys():
ax_pol[i] = attrs[key][0]
else:
ax_pol[i] = 1
#Adjust the probe for the origin and possible direction reversal
pos[:, 0] = pos[:, 0] * ax_pol[0] + origin[0]
pos[:, 1] = pos[:, 1] * ax_pol[1] + origin[1]
pos[:, 2] = pos[:, 2] * ax_pol[2] + origin[2]
#Generate the grid axes
#TODO support non-cartesian axis gridding here? With a keyword or something?
if strict_axes is True:
try:
print("Applying stric axis creation")
nx = attrs['nx'][0]
ny = attrs['ny'][0]
nz = attrs['nz'][0]
dx = attrs['dx'][0]
dy = attrs['dy'][0]
dz = attrs['dz'][0]
x0 = attrs['x0'][0]
y0 = attrs['y0'][0]
z0 = attrs['z0'][0]
xaxis, yaxis, zaxis = makeAxes(nx, ny, nz, dx, dy, dz, x0, y0, z0)
#Apply these transformations to the made axes
xaxis = xaxis * ax_pol[0] + origin[0]
yaxis = yaxis * ax_pol[1] + origin[1]
zaxis = zaxis * ax_pol[2] + origin[2]
except KeyError:
print("Missing axis parameters: attempting fuzzy axis creation")
#Continue through to the strict_axes =False case if this happens
strict_axes = False
if strict_axes is False:
print("Applying fuzzy axis creation")
xaxis, yaxis, zaxis = guessAxes(pos, precision=grid_precision)
#Calculate length of axes
nx, ny, nz, nreps = calcNpoints(pos, xaxis, yaxis, zaxis)
#This line SHOULD be redundent, but sometimes it's necessary.
#It is possible, when combining two motion lists, to get
#some extra shots at the end of the datarun that don't have
#positions associated. Recalculating this here ensures we only
#take the ones relevant to this grid
nshots = nx * ny * nz * nreps
#If grid precision is zero, apply strict gridding
#Otherwise, apply fuzzy gridding
if strict_grid:
print("Applying strict gridding")
shotgridind = strictGrid(nx, ny, nz, nreps)
else:
print("Applying fuzzy gridding")
shotgridind = fuzzyGrid(pos,
xaxis,
yaxis,
zaxis,
precision=grid_precision)
if invert:
shotgridind = invertShotGrid(shotgridind, xaxis, yaxis, zaxis)
return shotgridind, xaxis, yaxis, zaxis, nx, ny, nz, nreps, nshots
def scopeRawToFull(src,
dest,
port=14,
tdiode_hdf=None,
verbose=False,
debug=False,
vdist=False):
"""
Parameters
----------
src: hdfPath object
Path string to a raw hdf5 file containing bdot data
dest: hdfPath object
Path string to location processed bdot data should be written out
tdiode_hdf: hdfPath object
Path to a raw hdf5 file containing tdiode data. If no HDF file is
provided, no timing correction will be applied.
port: float
port at which the probe is located
Returns
-------
True (if executes to the end)
"""
# ******
# Load data from the raw HDF file
# ******
with h5py.File(src.file, 'r') as sf:
#Get the datagroup
srcgrp = sf[src.group]
#Create dictionary of attributes
attrs = hdftools.readAttrs(srcgrp)
#Check for keys always required by this function
req_keys = []
#Process the required keys, throwing an error if any cannot be found
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#Extract the shape of the source data
nshots, nti, nchan = srcgrp['data'].shape
if verbose:
print("Opening destination HDF file")
#Create the destination file directory if necessary
hdftools.requireDirs(dest.file)
#Open the destination file
#This exists WITHIN the open statement for the source file, so the
#source file is open at the same time.
with h5py.File(dest.file, 'a') as df:
#Throw an error if this group already exists
if dest.group is not '/' and dest.group in df.keys():
raise hdftools.hdfGroupExists(dest)
destgrp = df.require_group(dest.group)
#Copy over attributes
hdftools.copyAttrs(srcgrp, destgrp)
#Load the time vector
t = srcgrp['time']
#If tdiode_hdf is set, load the pre-processed tdiode data
if tdiode_hdf is not None:
if verbose:
print("Loading tdiode array from file.")
with h5py.File(tdiode_hdf.file, 'r') as sf:
grp = sf[tdiode_hdf.group]
t0indarr = grp['t0indarr'][:]
goodshots = grp['goodshots'][:]
tdiode_attrs = hdftools.readAttrs(grp)
#If tdiode was digitized with a different dt, this correction
#will be necessary
dt_ratio = float(attrs['dt'][0]) / float(tdiode_attrs['dt'][0])
t0indarr = (t0indarr / dt_ratio).astype(np.int32)
#We will remove up to max_t0shift indices from each array such that
#the t0 indices all line up.
min_t0ind = np.min(t0indarr[goodshots])
max_t0shift = np.max(t0indarr[goodshots]) - min_t0ind
#Compute new nti
nti = nti - max_t0shift
t = t[0:nti] - t[min_t0ind]
#Throw an error if this dataset already exists
if 'data' in destgrp.keys():
raise hdftools.hdfDatasetExists(str(dest) + ' -> ' + "'data'")
#Create the dataset 'data' appropriate to whether or not output
#data will be gridded
if verbose:
print("Creating 'data' group in destination file")
destgrp.require_dataset('data', (nshots, nti),
np.float32,
chunks=(1, np.min([nti, 20000])),
compression='gzip')
#Initialize time-remaining printout
tr = util.timeRemaining(nshots)
if verbose:
print("Beginning processing data shot-by-shot.")
#Chunking data processing loop limits memory usage
for i in range(nshots):
#Update time remaining
if verbose:
tr.updateTimeRemaining(i)
#If a tdiode hdf was supplied, calculate the index correction
#here
if tdiode_hdf is not None:
#Calculate the starting and ending arrays for the data
ta = t0indarr[i] - min_t0ind
tb = ta + nti
else:
#By default, read in the entire dataset
ta = None
tb = None
if debug:
print("Data range: [" + str(ta) + "," + str(tb) + "]")
#Read in the data from the source file
signal = np.squeeze(srcgrp['data'][i, ta:tb])
destgrp['data'][i, :] = signal
destgrp['data'].attrs['unit'] = ''
if 'pos' in srcgrp:
destgrp.copy(srcgrp['pos'], 'pos')
destgrp.require_dataset('shots', (nshots, ), np.int32,
chunks=True)[:] = srcgrp['shots'][:]
destgrp['shots'].attrs['unit'] = srcgrp['shots'].attrs['unit']
dimlabels = ['shots', 'time']
destgrp.require_dataset('time', (nti, ), np.float32,
chunks=True)[:] = t
destgrp['time'].attrs['unit'] = 's'
destgrp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
if verbose:
print("End of Monochromator routine!")
return True
def bdotRawToFull(src, dest,
tdiode_hdf=None, grid=False, integrate=True,
calibrate =True, highfreq_calibrate=True,
angle_correction = True, remove_offset = True,
replace_badshots = True,
verbose=False, debug = False,
offset_range=(0,100), offset_rel_t0 = (False, False),
grid_precision=0.1, strict_grid=False, strict_axes = False):
""" Integrates bdot data, calibrates output using information about the probe.
Corrects for probe angle based on which drive is being used.
Parameters
----------
src: hdfPath object
Path string to a raw hdf5 file containing bdot data
dest: hdfPath object
Path string to location processed bdot data should be written out
tdiode_hdf: hdfPath object
Path to a raw hdf5 file containing tdiode data. If no HDF file is
provided, no timing correction will be applied.
grid: Boolean
If grid is true, output will be written in cartesian grid array
format, eg. [nti, nx, ny, nz, nreps, nchan]. Otherwise, output will
be in [nshots, nti, nchan] format
integrate: Boolean
If True, integrate the bdot data (usually you want to do this).
Default is True
calibrate: Boolean
If True, calculate and apply ANY calibration factors
to the data. Default is True.
highfreq_calibrate: Boolean
If True, calculate and apply the high frequency calibration
factors to the data. Default is True. If the 'tau' variables are
not specified in the probe metadata, the HF calibration won't be
applied regardless of this keyword.
angle_correction: Boolean
If True, apply any angular correction between axes that is
required based on the motion_format keyword in the metadata. If
false, no correction is applied regardless of the metadata.
Default is True.
remove_offset: Boolean
If True, remove an offset from the data based on the offset_range
specified in those keywords. If False, data will remain as-is.
Default is True.
replace_badshots: Boolean
If True, semi-intelligently replace bad shots with neighboring
good shots. If False, data remains as-is.
Default is True.
offset_range: tuple
Tuple of indices between which the average of the signal will be
computed and subtracted from the entire signal to correct for
offset. This should be a segment with just noise, ideally at the
very beginning of the dataset. Longer is better.
Default is (0,100)
offset_rel_t0: Tuple of booleans
If either of these values is set to True, the coorresponding
offset_range value will be taken to be relative to the t0 index
for that each shot. For example, if t0=2000 for a shot,
offset_range=(10, -100), and offset_rel_t0 = (False, True), then
the offset will be computed over the range (10, 1900)
grid_precision: float
This is the precision to which position values will be rounded
before being fit onto the grid. Only applies to fuzzy axis and grid
creation.
strict_axes: boolean
If true, attempt to calculate axes from saved grid parameters.
Default is false, which attempts to calculate axes by looking at
position values.
strict_grid: boolean
If true, strictly unravel data onto the axes, assuming the probe
moved in order reps->X->Y->Z. This will NOT correctly handle
points where the probe was not at the requested position. Default
is false, which applys "fuzzy gridding", which tries to find the
best grid position for each shot individually.
Returns
-------
True (if executes to the end)
"""
# ******
# Load data from the raw HDF file
# ******
with h5py.File(src.file, 'r') as sf:
#Get the datagroup
srcgrp = sf[src.group]
#Create dictionary of attributes
attrs = hdftools.readAttrs(srcgrp)
#Check for keys always required by this function
req_keys = ['xarea', 'yarea', 'zarea',
'xatten', 'yatten', 'zatten', 'gain',
'xpol', 'ypol', 'zpol', 'roll',
'probe_origin_x', 'probe_origin_y', 'probe_origin_z',
'dt', 'nturns']
if 'pos' in srcgrp:
pos = srcgrp['pos'][:] #Read the entire array in
#If pos array exists, there are keywords required for that too.
motion_format = attrs['motion_format'][0]
if motion_format == 'fixed_pivot' and angle_correction:
req_keys = req_keys + ['rot_center_x', 'rot_center_y', 'rot_center_z']
elif motion_format == 'cartesian' and angle_correction:
pass
elif not angle_correction:
pass
else:
raise ValueError("Motion format unrecognized: " + str(attrs['motion_format'][0]) )
else:
#If no position information is given, a single explicit position
#is required.
req_keys = req_keys + ['xpos', 'ypos', 'zpos']
grid = False #Can't grid data if there's no pos array!
motion_format = None
#Process the required keys, throwing an error if any cannot be found
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#Extract the shape of the source data
nshots, nti, nchan = srcgrp['data'].shape
#If requested by keyword, apply gridding
if grid:
shotgridind, xaxis, yaxis, zaxis, nx, ny, nz, nreps, nshots = postools.grid(
pos, attrs, strict_axes=strict_axes,
strict_grid=strict_grid, grid_precision=grid_precision,
invert=False)
if verbose:
print("Opening destination HDF file")
#Create the destination file directory if necessary
hdftools.requireDirs(dest.file)
#Open the destination file
#This exists WITHIN the open statement for the source file, so the
#source file is open at the same time.
with h5py.File(dest.file, 'a') as df:
#Throw an error if this group already exists
if dest.group is not '/' and dest.group in df.keys():
raise hdftools.hdfGroupExists(dest)
destgrp = df.require_group(dest.group)
#Copy over attributes
hdftools.copyAttrs(srcgrp, destgrp)
#Load the time vector
t = srcgrp['time']
#If a timing diode is being applied, correct the time vector here.
if tdiode_hdf is not None:
if verbose:
print("Loading tdiode array from file.")
with h5py.File(tdiode_hdf.file, 'r') as sf:
grp = sf[tdiode_hdf.group]
t0indarr = grp['t0indarr'][:]
goodshots = grp['goodshots'][:]
badshots = grp['badshots'][:]
tdiode_attrs = hdftools.readAttrs(grp)
#If tdiode was digitized with a different dt, this correction
#will be necessary
dt_ratio = float(attrs['dt'][0])/float(tdiode_attrs['dt'][0])
t0indarr = (t0indarr/dt_ratio).astype(np.int32)
#We will remove up to max_t0shift indices from each array such that
#the t0 indices all line up.
min_t0ind = np.min(t0indarr[goodshots])
max_t0shift = np.max(t0indarr[goodshots]) - min_t0ind
#Compute new nti
nti = nti - max_t0shift
t = t[0:nti] - t[min_t0ind]
#Throw an error if this dataset already exists
if 'data' in destgrp.keys():
raise hdftools.hdfDatasetExists(str(dest) + ' -> ' + "'data'")
#Create the dataset 'data' appropriate to whether or not output
#data will be gridded
if verbose:
print("Creating 'data' group in destination file")
if grid:
destgrp.require_dataset('data', (nti, nx, ny, nz, nreps, nchan), np.float32, chunks=(np.min([nti, 20000]),1,1,1,1,1), compression='gzip')
else:
destgrp.require_dataset('data', (nshots, nti, nchan), np.float32, chunks=(1, np.min([nti, 20000]), 1), compression='gzip')
# dt -> s
dt = ( attrs['dt'][0]*u.Unit(attrs['dt'][1])).to(u.s).value
if calibrate:
#First calculate the low frequency calibration factors
calAx, calAy, calAz = calibrationFactorsLF(attrs)
#If HF calibration factors are provided, calculate those
#calibraton constants too
if 'xtau' in attrs.keys() and highfreq_calibrate:
calBx, calBy, calBz = calibrationFactorsHF(attrs)
else:
calBx, calBy, calBz = None,None,None
#This segment of code checks for bad shots and replaces them with
#Neighboring good shots
shotlist = np.arange(nshots)
if replace_badshots and tdiode_hdf is not None:
for i in shotlist:
if i in badshots:
#If the shot is bad, determine the best neighbor shot
#to replace it with
before_shot = i
after_shot = i
#Identify nearest good shot before and after
while before_shot in badshots:
before_shot = before_shot - 1
while after_shot in badshots:
after_shot = after_shot + 1
#If position data is provided, use that to determine
#the best match
if 'pos' in srcgrp:
before_dist = (np.power(pos[i,0] - pos[before_shot,0],2) +
np.power(pos[i,1] - pos[before_shot,1],2) +
np.power(pos[i,2] - pos[before_shot,2],2) )
after_dist = (np.power(pos[i,0] - pos[after_shot,0],2) +
np.power(pos[i,1] - pos[after_shot,1],2) +
np.power(pos[i,2] - pos[after_shot,2],2) )
if before_dist > after_dist:
best_match = after_shot
else:
best_match = before_shot
#Otherwise just chose the earlier shot as the default
else:
best_match = before_shot
if verbose:
print("Replaced bad shot " + str(i) + " with " + str(best_match))
#Actually make the substitution
shotlist[i] = best_match
#Initialize time-remaining printout
tr = util.timeRemaining(nshots)
if verbose:
print("Beginning processing data shot-by-shot.")
#Chunking data processing loop limits memory usage
for ind in range(nshots):
#i == ind unless this is a bad shot
i = shotlist[ind]
#Update time remaining
if verbose:
tr.updateTimeRemaining(i)
#If a tdiode hdf was supplied, calculate the index correction
#here
if tdiode_hdf is not None and remove_offset:
#Calculate the starting and ending arrays for the data
ta = t0indarr[ind] - min_t0ind
tb = ta + nti
#Calculate the range over which to calculate the offset
#for each shot
#If offset_rel_t0 is set for either point, add the t0 array
if offset_rel_t0[0]:
offset_a = offset_range[0] + t0indarr[i] - ta
else:
offset_a = offset_range[0]
if offset_rel_t0[1]:
offset_b = offset_range[1] + t0indarr[i] - ta
else:
offset_b = offset_range[1]
#added this to deal with cases where you have a timing diode but don't want to remove voltage offset
elif tdiode_hdf is not None and remove_offset == False:
#Calculate the starting and ending arrays for the data
ta = t0indarr[ind] - min_t0ind
tb = ta + nti
offset_a = offset_range[0]
offset_b = offset_range[1]
else:
#By default, read in the entire dataset
ta = None
tb = None
offset_a = offset_range[0]
offset_b = offset_range[1]
if debug:
print("Data range: [" + str(ta) + "," + str(tb) + "]")
print("Offset range: [" + str(offset_a) + "," +
str(offset_b) + "]")
#Read in the data from the source file
dbx = srcgrp['data'][i,ta:tb, 0]
dby = srcgrp['data'][i,ta:tb, 1]
dbz = srcgrp['data'][i,ta:tb, 2]
if remove_offset:
#Remove offset from each channel
dbx = dbx - np.mean(dbx[offset_a:offset_b])
dby = dby - np.mean(dby[offset_a:offset_b])
dbz = dbz - np.mean(dbz[offset_a:offset_b])
if integrate:
#Intgrate
bx = np.cumsum(dbx)*dt
by = np.cumsum(dby)*dt
bz = np.cumsum(dbz)*dt
else:
bx,by,bz = dbx, dby, dbz
if calibrate:
#Apply the high-frequency calibration if one was
#provided
if calBx is not None and highfreq_calibrate:
bx = bx + calBx*dbx
by = by + calBy*dby
bz = bz + calBz*dbz
#Apply the low-frequency calibration factors
#Probe pol dir is included in these
bx = bx*calAx
by = by*calAy
bz = bz*calAz
#If a motion_format is set, apply the appropriate probe angle correction
if motion_format == 'cartesian' and angle_correction:
#Don't need to make any correction
pass
elif motion_format == 'fixed_pivot' and angle_correction:
#x,y,z is the probe's current position
x,y,z = srcgrp['pos'][i, :]
#rx, ry, rz is the location of the probe rotation point
#i.e. the center of the ball valve.
rx, ry, rz = attrs['rot_center_x'][0],attrs['rot_center_y'][0],attrs['rot_center_z'][0]
#x-rx, y-ry, z-rz is a vector pointing along the probe
#shaft towards the probe tip
#pitch is the angle of the probe shaft to the xz plane
pitch = np.arctan( (y-ry) / (x-rx) )
#yaw is the angle of the probe shaft to the xy plane
yaw = np.arctan( (z-rz) / (x-rx) )
if debug:
print("****Fixed Pivot Debug*******")
print("(x,y,z) = ({:5.2f},{:5.2f},{:5.2f})".format(x,y,z))
print("(rx,ry,rz) = ({:5.2f},{:5.2f},{:5.2f})".format(rx,ry,rz))
print("Pitch: " + str(np.degrees(pitch)))
print("Yaw: " + str(np.degrees(yaw)))
#If the probe is coming from the -X direction, its calibrated Z axis is already off by 180 degrees.
#This is because the probes are calibrated to match the East side of LAPD
if ((x-rx) > 0.0):
yaw = yaw + np.pi
#Roll is rotation of the probe about its axis, with
#y+ oriented up as roll=0
#This should be zero, unless a probe was later discovered
#to be incorrectly calibrated, so that the +Y mark was
#wrong
roll, unit = attrs['roll']
if unit != 'rad':
np.radians(roll)
#Matrix is the first Tait-Bryan matrix XZY from https://en.wikipedia.org/wiki/Euler_angles
#1 -> roll
#2 -> pitch
#3 -> yaw
bx = (np.cos(pitch)*np.cos(yaw)*bx -
np.sin(pitch)*by +
np.cos(pitch)*np.sin(yaw)*bz)
by = ((np.sin(roll)*np.sin(yaw) + np.cos(roll)*np.cos(yaw)*np.sin(pitch))*bx +
np.cos(roll)*np.cos(pitch)*by +
(np.cos(roll)*np.sin(pitch)*np.sin(yaw) - np.cos(yaw)*np.sin(roll))*bz)
bz = ((np.cos(yaw)*np.sin(roll)*np.sin(pitch) - np.cos(roll)*np.sin(yaw))*bx +
np.cos(pitch)*np.sin(roll)*by +
(np.cos(roll)*np.cos(yaw) + np.sin(roll)*np.sin(pitch)*np.sin(yaw))*bz)
if grid:
#Get location to write this datapoint from the shotgridind
xi = shotgridind[ind, 0]
yi = shotgridind[ind, 1]
zi = shotgridind[ind, 2]
repi = shotgridind[ind, 3]
#Write data
try:
#print(f"length destgrp selected {len(destgrp['data'][:, xi, yi, zi, repi, 0])}")
destgrp['data'][:, xi, yi, zi, repi, 0] = bx
destgrp['data'][:, xi, yi, zi, repi, 1] = by
destgrp['data'][:, xi, yi, zi, repi, 2] = bz
except ValueError as e:
print("ERROR!")
print(destgrp['data'].shape)
print(bx.shape)
print([xi, yi, zi, repi])
raise(e)
else:
#Write data
destgrp['data'][ind,:, 0] = bx
destgrp['data'][ind,:, 1] = by
destgrp['data'][ind,:, 2] = bz
if verbose:
print("Writing axes to destination file")
#Write the axes as required by the format of the data written
if motion_format is not None:
#Add the other axes and things we'd like in this file
destgrp.require_dataset('pos', (nshots, 3), np.float32, chunks=True)[:] = srcgrp['pos'][0:nshots]
for k in srcgrp['pos'].attrs.keys():
destgrp['pos'].attrs[k] = srcgrp['pos'].attrs[k]
if grid:
dimlabels = ['time', 'xaxis', 'yaxis', 'zaxis', 'reps', 'chan']
destgrp.require_dataset('xaxis', (nx,), np.float32, chunks=True)[:] = xaxis
destgrp['xaxis'].attrs['unit'] = attrs['motion_unit'][0]
destgrp.require_dataset('yaxis', (ny,), np.float32, chunks=True)[:] = yaxis
destgrp['yaxis'].attrs['unit'] = attrs['motion_unit'][0]
destgrp.require_dataset('zaxis', (nz,), np.float32, chunks=True)[:] = zaxis
destgrp['zaxis'].attrs['unit'] = attrs['motion_unit'][0]
destgrp.require_dataset('reps', (nreps,), np.int32, chunks=True)[:] = np.arange(nreps)
destgrp['reps'].attrs['unit'] = ''
else:
dimlabels = ['shots', 'time', 'chan']
destgrp.require_dataset('shots', (nshots,), np.int32, chunks=True)[:] = srcgrp['shots'][:]
destgrp['shots'].attrs['unit'] = srcgrp['shots'].attrs['unit']
destgrp.require_dataset('chan', (nchan,), np.int32, chunks=True)[:] = srcgrp['chan'][:]
destgrp['chan'].attrs['unit'] = srcgrp['chan'].attrs['unit']
destgrp.require_dataset('time', (nti,), np.float32, chunks=True)
destgrp['time'][:] = t
destgrp['time'].attrs['unit'] = srcgrp['time'].attrs['unit']
if calibrate:
destgrp['data'].attrs['unit'] = 'G'
else:
destgrp['data'].attrs['unit'] = 'V'
destgrp['data'].attrs['dimensions'] = [s.encode('utf-8') for s in dimlabels]
del(bx,by,bz)
if verbose:
print("End of BDOT routine!")
return True
def imgDirToRaw(run, probe, img_dir, dest, csv_dir, verbose=False):
#Import attributes for this run/probe
attrs = csvtools.getAllAttrs(csv_dir, run, probe)
#Check for keys always required by this function
req_keys = ['run_folder']
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
run_folder = attrs['run_folder'][0]
src = os.path.join(img_dir, run_folder)
#Go through the directory and fine all the image files
imgfiles = []
for root, dirs, files in os.walk(src):
files = [f for f in files
if f[0] != '.'] #Exclude files beginning in .
for file in files:
imgfiles.append(os.path.join(src, file))
#Natural-sort the images by filename
imgfiles = natural_sort(imgfiles)
nframes = len(imgfiles)
#remove files if they already exist
if os.path.exists(dest.file):
os.remove(dest.file)
#Create the destination file
with h5py.File(dest.file, "a") as df:
#Assume all images are the same shape, load the first one to figure
#out the array dimensions
img = PIL.Image.open(imgfiles[0])
nxpx, nypx = img.size
#Bands will include the names of the different channels
nchan = len(img.getbands())
#Create the dest group, throw error if it exists
if dest.group != '/' and dest.group in df.keys():
raise hdftools.hdfGroupExists(dest)
grp = df[dest.group]
#Initialize the output data array
if 'data' in grp.keys():
raise hdftools.hdfDatasetExists(str(dest) + ' -> ' + "'data'")
#Create the dataset + associated attributes
grp.require_dataset("data", (nframes, nxpx, nypx, nchan),
np.float32,
chunks=(1, nxpx, nypx, 1),
compression='gzip')
grp['data'].attrs['unit'] = ''
#Initialize time-remaining printout
tr = util.timeRemaining(nframes, reportevery=5)
#Actually put the images into the file
for i, f in enumerate(imgfiles):
tr.updateTimeRemaining(i)
img = np.array(PIL.Image.open(f))
img = np.reshape(img, [nxpx, nypx, nchan])
#Rotate images
for chan in range(nchan):
img[:, :, chan] = np.rot90(img[:, :, chan], k=3)
grp['data'][i, :, :, :] = img
dimlabels = ['frames', 'xpixels', 'ypixels', 'chan']
grp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
#Write the attrs dictioanry into attributes of the new data group
hdftools.writeAttrs(attrs, grp)
#Create the axes
grp.require_dataset('frames', (nframes, ), np.float32,
chunks=True)[:] = np.arange(nframes)
grp['frames'].attrs['unit'] = ''
grp.require_dataset('xpixels', (nxpx, ), np.float32,
chunks=True)[:] = np.arange(nxpx)
grp['xpixels'].attrs['unit'] = ''
grp.require_dataset('ypixels', (nypx, ), np.float32,
chunks=True)[:] = np.arange(nypx)
grp['ypixels'].attrs['unit'] = ''
grp.require_dataset('chan', (nchan, ), np.float32,
chunks=True)[:] = np.arange(nchan)
grp['chan'].attrs['unit'] = ''
return dest
def isatRawToFull(src,
dest,
ti=1.0,
mu=4.0,
tdiode_hdf=None,
grid=False,
offset_range=(0, 100),
offset_rel_t0=(False, False),
verbose=False,
debug=False,
grid_precision=0.1,
strict_grid=False,
strict_axes=False):
""" Integrates isat Langmuir probe data, calibrates output using information about the probe.
Parameters
----------
src: hdfPath object
Path string to a raw hdf5 file containing data
dest: hdfPath object
Path string to location processed data should be written out
ti: Ion temperature (eV). Default assumption is 1 eV, which is typical
of the LAPD LaB6 plasma. Scaling is as 1/sqrt(Ti).
mu: Ion mass number (m_i/m_p = mu). Default is 4.0, for Helium.
tdiode_hdf: hdfPath object
Path to a raw hdf5 file containing tdiode data. If no HDF file is
provided, no timing correction will be applied.
grid: Boolean
If grid is true, output will be written in cartesian grid array
format, eg. [nti, nx, ny, nz, nreps, nchan]. Otherwise, output will
be in [nshots, nti, nchan] format
offset_range: tuple
Tuple of indices between which the average of the signal will be
computed and subtracted from the entire signal to correct for
offset. This should be a segment with just noise, ideally at the
very beginning of the dataset. Longer is better.
Default is (0,100)
offset_rel_t0: Tuple of booleans
If either of these values is set to True, the coorresponding
offset_range value will be taken to be relative to the t0 index
for that each shot. For example, if t0=2000 for a shot,
offset_range=(10, -100), and offset_rel_t0 = (False, True), then
the offset will be computed over the range (10, 1900)
grid_precision: float
This is the precision to which position values will be rounded
before being fit onto the grid. Only applies to fuzzy axis and grid
creation.
strict_axes: boolean
If true, attempt to calculate axes from saved grid parameters.
Default is false, which attempts to calculate axes by looking at
position values.
strict_grid: boolean
If true, strictly unravel data onto the axes, assuming the probe
moved in order reps->X->Y->Z. This will NOT correctly handle
points where the probe was not at the requested position. Default
is false, which applys "fuzzy gridding", which tries to find the
best grid position for each shot individually.
Returns
-------
True (if executes to the end)
"""
# ******
# Load data from the raw HDF file
# ******
with h5py.File(src.file, 'r') as sf:
#Get the datagroup
srcgrp = sf[src.group]
#Create dictionary of attributes
attrs = hdftools.readAttrs(srcgrp)
#Check for keys always required by this function
req_keys = [
'area', 'atten', 'gain', 'resistor', 'dir', 'pol',
'probe_origin_x', 'probe_origin_y', 'probe_origin_z', 'dt'
]
if 'pos' in srcgrp:
pos = srcgrp['pos'][:] #Read the entire array in
else:
#If no position information is given, a single explicit position
#is required.
req_keys = req_keys + ['probe_xpos', 'probe_ypos', 'probe_zpos']
grid = False #Can't grid data if there's no pos array!
#Process the required keys, throwing an error if any cannot be found
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#Extract the shape of the source data
nshots, nti, nchan = srcgrp['data'].shape
#If requested by keyword, apply gridding
if grid:
shotgridind, xaxis, yaxis, zaxis, nx, ny, nz, nreps, nshots = postools.grid(
pos,
attrs,
strict_axes=strict_axes,
strict_grid=strict_grid,
grid_precision=grid_precision,
invert=False)
if verbose:
print("Opening destination HDF file")
#Create the destination file directory if necessary
hdftools.requireDirs(dest.file)
#Open the destination file
#This exists WITHIN the open statement for the source file, so the
#source file is open at the same time.
#remove files if they already exist
if os.path.exists(dest.file):
os.remove(dest.file)
with h5py.File(dest.file, 'a') as df:
#Throw an error if this group already exists
if dest.group is not '/' and dest.group in df.keys():
raise hdftools.hdfGroupExists(dest)
destgrp = df.require_group(dest.group)
#Copy over attributes
hdftools.copyAttrs(srcgrp, destgrp)
#Load the time vector
t = srcgrp['time']
#If tdiode_hdf is set, load the pre-processed tdiode data
if tdiode_hdf is not None:
if verbose:
print("Loading tdiode array from file.")
with h5py.File(tdiode_hdf.file, 'r') as sf:
grp = sf[tdiode_hdf.group]
t0indarr = grp['t0indarr'][:]
goodshots = grp['goodshots'][:]
tdiode_attrs = hdftools.readAttrs(grp)
#If tdiode was digitized with a different dt, this correction
#will be necessary
dt_ratio = float(attrs['dt'][0]) / float(tdiode_attrs['dt'][0])
t0indarr = (t0indarr / dt_ratio).astype(np.int32)
#We will remove up to max_t0shift indices from each array such that
#the t0 indices all line up.
min_t0ind = np.min(t0indarr[goodshots])
max_t0shift = np.max(t0indarr[goodshots]) - min_t0ind
#Compute new nti
nti = nti - max_t0shift
t = t[0:nti] - t[min_t0ind]
#Throw an error if this dataset already exists
if 'data' in destgrp.keys():
raise hdftools.hdfDatasetExists(str(dest) + ' -> ' + "'data'")
#Create the dataset 'data' appropriate to whether or not output
#data will be gridded
if verbose:
print("Creating 'data' group in destination file")
if grid:
destgrp.require_dataset('data', (nti, nx, ny, nz, nreps),
np.float32,
chunks=(np.min([nti,
20000]), 1, 1, 1, 1),
compression='gzip')
else:
destgrp.require_dataset('data', (nshots, nti),
np.float32,
chunks=(1, np.min([nti, 20000])),
compression='gzip')
dt = (attrs['dt'][0] * u.Unit(attrs['dt'][1])).to(u.s).value
resistor = float(attrs['resistor'][0]) #Ohms
area = (attrs['area'][0] * u.Unit(attrs['area'][1])).to(
u.m**2).value
#Initialize time-remaining printout
tr = util.timeRemaining(nshots)
if verbose:
print("Beginning processing data shot-by-shot.")
#Chunking data processing loop limits memory usage
for i in range(nshots):
#Update time remaining
if verbose:
tr.updateTimeRemaining(i)
#If a tdiode hdf was supplied, calculate the index correction
#here
if tdiode_hdf is not None:
#Calculate the starting and ending arrays for the data
ta = t0indarr[i] - min_t0ind
tb = ta + nti
else:
#By default, read in the entire dataset
ta = None
tb = None
if debug:
print("Data range: [" + str(ta) + "," + str(tb) + "]")
#Read in the data from the source file
voltage = srcgrp['data'][i, ta:tb, 0]
#Calculate density
#Equation is 2 from this paper: 10.1119/1.2772282
#This is valid for the regime Te~Ti, which is approx true in
#LAPD
density = 1.6e9 * np.sqrt(mu) * voltage / (resistor * area
) #cm^-3
if grid:
#Get location to write this datapoint from the shotgridind
xi = shotgridind[i, 0]
yi = shotgridind[i, 1]
zi = shotgridind[i, 2]
repi = shotgridind[i, 3]
#Write data
try:
destgrp['data'][:, xi, yi, zi, repi] = density
except ValueError as e:
print("ERROR!")
print(destgrp['data'].shape)
print(voltage.shape)
print([xi, yi, zi, repi])
raise (e)
else:
#Write data
destgrp['data'][i, :] = density
if verbose:
print("Writing axes to destination file")
if grid:
#Add the other axes and things we'd like in this file
destgrp.require_dataset(
'pos', (nshots, 3), np.float32,
chunks=True)[:] = srcgrp['pos'][0:nshots]
for k in srcgrp['pos'].attrs.keys():
destgrp['pos'].attrs[k] = srcgrp['pos'].attrs[k]
dimlabels = ['time', 'xaxis', 'yaxis', 'zaxis', 'reps']
destgrp.require_dataset('xaxis', (nx, ),
np.float32,
chunks=True)[:] = xaxis
destgrp['xaxis'].attrs['unit'] = attrs['motion_unit'][0]
destgrp.require_dataset('yaxis', (ny, ),
np.float32,
chunks=True)[:] = yaxis
destgrp['yaxis'].attrs['unit'] = attrs['motion_unit'][0]
destgrp.require_dataset('zaxis', (nz, ),
np.float32,
chunks=True)[:] = zaxis
destgrp['zaxis'].attrs['unit'] = attrs['motion_unit'][0]
destgrp.require_dataset('reps', (nreps, ),
np.int32,
chunks=True)[:] = np.arange(nreps)
destgrp['reps'].attrs['unit'] = ''
else:
dimlabels = ['shots', 'time']
destgrp.require_dataset('shots', (nshots, ),
np.int32,
chunks=True)[:] = srcgrp['shots'][:]
destgrp['shots'].attrs['unit'] = srcgrp['shots'].attrs['unit']
destgrp.require_dataset('time', (nti, ), np.float32, chunks=True)
destgrp['time'][:] = t
destgrp['time'].attrs['unit'] = srcgrp['time'].attrs['unit']
destgrp['data'].attrs['unit'] = 'cm^{-3}'
destgrp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
if verbose:
print("End of isat Langmuir routine!")
return True
def vsweepLangmuirRawToFull(src,
ndest,
tdest,
grid=True,
verbose=False,
plots=False,
debug=False,
grid_precision=0.1,
strict_grid=False,
strict_axes=False):
""" Fits sweept Langmuir probe data and creates two full save files
containing the calculated density and temperature
Parameters
----------
src: hdfPath object
Path string to a raw hdf5 file containing swept Langmuir probe data
There should be two channels: the first being the Langmuir current
and the second being the ramp voltage.
ndest: hdfPath object
Path string to location processed density data is written out
tdest: hdfPath object
Path string to location processed temperature data is written out
grid: Boolean
If grid is true, output will be written in cartesian grid array
format, eg. [nti, nx, ny, nz, nreps, nchan]. Otherwise, output will
be in [nshots, nti, nchan] format
grid_precision: float
This is the precision to which position values will be rounded
before being fit onto the grid. Only applies to fuzzy axis and grid
creation.
strict_axes: boolean
If true, attempt to calculate axes from saved grid parameters.
Default is false, which attempts to calculate axes by looking at
position values.
strict_grid: boolean
If true, strictly unravel data onto the axes, assuming the probe
moved in order reps->X->Y->Z. This will NOT correctly handle
points where the probe was not at the requested position. Default
is false, which applys "fuzzy gridding", which tries to find the
best grid position for each shot individually.
Returns
-------
True (if executes to the end)
"""
# ******
# Load data from the raw HDF file
# ******
with h5py.File(src.file, 'r') as sf:
#Get the datagroup
srcgrp = sf[src.group]
#Create dictionary of attributes
attrs = hdftools.readAttrs(srcgrp)
#Check for keys always required by this function
req_keys = [
'area', 'resistor', 'gain', 'atten', 'ramp_gain', 'ramp_atten',
'probe_origin_x', 'probe_origin_y', 'probe_origin_z'
]
if 'pos' in srcgrp:
pos = srcgrp['pos'][:] #Read the entire array in
else:
#If no position information is given, a single explicit position
#is required.
req_keys = req_keys + ['xpos', 'ypos', 'zpos']
grid = False #Can't grid data if there's no pos array!
#Process the required keys, throwing an error if any cannot be found
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#Extract the shape of the source data
nshots, nti, nchan = srcgrp['data'].shape
#If requested by keyword, apply gridding
if grid:
shotlist, xaxis, yaxis, zaxis, nx, ny, nz, nreps, nshots = postools.grid(
pos,
attrs,
strict_axes=strict_axes,
strict_grid=strict_grid,
grid_precision=grid_precision,
invert=True)
if verbose:
print("Opening destination HDF files")
#Create the destination file directory if necessary
#hdftools.requireDirs(ndest.file)
#hdftools.requireDirs(tdest.file)
#Open the destination file
#This exists WITHIN the open statement for the source file, so the
#source file is open at the same time.
#Check if the output files exist already: if so, delete them
if os.path.exists(ndest.file):
os.remove(ndest.file)
if os.path.exists(tdest.file):
os.remove(tdest.file)
with h5py.File(ndest.file, 'a') as ndf:
with h5py.File(tdest.file, 'a') as tdf:
#Throw an error if this group already exists
if ndest.group != '/' and ndest.group in ndf.keys():
raise hdftools.hdfGroupExists(ndest)
if tdest.group != '/' and tdest.group in tdf.keys():
raise hdftools.hdfGroupExists(tdest)
ndestgrp = ndf.require_group(ndest.group)
tdestgrp = tdf.require_group(tdest.group)
grps = [ndestgrp, tdestgrp]
for grp in grps:
hdftools.copyAttrs(srcgrp, grp)
#Throw an error if this dataset already exists
if 'data' in grp.keys():
raise hdftools.hdfDatasetExists(
str(grp) + ' -> ' + "'data'")
#Determine the time vector and nti
#Assume first shot is representative of the vramp
vramp = srcgrp['data'][0, :, 1]
time = srcgrp['time'][:]
peaktimes, start, end = find_sweeps(time, vramp, plots=plots)
nti = len(peaktimes)
time = peaktimes
#Create the dataset 'data' appropriate to whether or not output
#data will be gridded
if verbose:
print("Creating 'data' group in destination file")
if grid:
ndestgrp.require_dataset('data', (nti, nx, ny, nz),
np.float32,
chunks=True,
compression='gzip')
ndestgrp.require_dataset('error', (nti, nx, ny, nz, 5),
np.float32,
chunks=True,
compression='gzip')
tdestgrp.require_dataset('data', (nti, nx, ny, nz),
np.float32,
chunks=True,
compression='gzip')
tdestgrp.require_dataset('error', (nti, nx, ny, nz, 5),
np.float32,
chunks=True,
compression='gzip')
else:
ndestgrp.require_dataset('data', (nti, ),
np.float32,
chunks=True,
compression='gzip')
ndestgrp.require_dataset('error', (nti, 5),
np.float32,
chunks=True,
compression='gzip')
tdestgrp.require_dataset('data', (nti, ),
np.float32,
chunks=True,
compression='gzip')
tdestgrp.require_dataset('error', (nti, 5),
np.float32,
chunks=True,
compression='gzip')
probe_gain = float(attrs['gain'][0])
probe_atten = float(attrs['atten'][0])
ramp_gain = float(attrs['ramp_gain'][0])
ramp_atten = float(attrs['ramp_atten'][0])
resistor = float(attrs['resistor'][0]) #Ohms
area = (attrs['area'][0] * u.Unit(attrs['area'][1])).to(
u.cm**2).value
probe_calib = np.power(10, probe_atten / 20.0) / probe_gain
ramp_calib = np.power(10, ramp_atten / 20.0) / ramp_gain
if grid:
#Initialize time-remaining printout
tr = util.timeRemaining(nx * ny * nz, reportevery=20)
for xi in range(nx):
for yi in range(ny):
for zi in range(nz):
i = zi + yi * nz + xi * nz * ny
if verbose:
tr.updateTimeRemaining(i)
s = shotlist[xi, yi, zi, :]
current = srcgrp['data'][
s, :, 0] * probe_calib / resistor
vramp = srcgrp['data'][s, :, 1] * ramp_calib
#Average over shots
current = np.mean(current, axis=0)
vramp = np.mean(vramp, axis=0)
for ti in range(nti):
a = int(start[ti])
b = int(end[ti])
vpp, kTe, esat, vthe, density, error = vsweep_fit(
vramp[a:b],
current[a:b],
esat_range=None,
exp_range=None,
plots=False,
area=area)
ndestgrp['data'][ti, xi, yi, zi] = density
ndestgrp['error'][ti, xi, yi,
zi, :] = error
tdestgrp['data'][ti, xi, yi, zi] = kTe
tdestgrp['error'][ti, xi, yi,
zi, :] = error
else: #Not gridded
current = srcgrp['data'][:, :, 0]
current = np.mean(current, axis=0) * probe_calib / resistor
vramp = srcgrp['data'][:, :, 1]
vramp = np.mean(vramp, axis=0) * ramp_calib
for ti in range(nti):
a = start[ti]
b = end[ti]
vpp, kTe, esat, vthe, density, error = vsweep_fit(
vramp[a:b],
current[a:b],
esat_range=None,
exp_range=None,
plots=False,
area=area)
ndestgrp['data'][ti] = density
ndestgrp['error'][ti, :] = error
tdestgrp['data'][ti] = kTe
tdestgrp['error'][ti, :] = error
for grp in grps:
#Write the axes as required by the format of the data written
if grid:
grp.require_dataset(
'pos', (nshots, 3), np.float32,
chunks=True)[:] = srcgrp['pos'][0:nshots]
for k in srcgrp['pos'].attrs.keys():
grp['pos'].attrs[k] = srcgrp['pos'].attrs[k]
dimlabels = ['time', 'xaxis', 'yaxis', 'zaxis']
grp.require_dataset('xaxis', (nx, ),
np.float32,
chunks=True)[:] = xaxis
grp['xaxis'].attrs['unit'] = attrs['motion_unit'][0]
grp.require_dataset('yaxis', (ny, ),
np.float32,
chunks=True)[:] = yaxis
grp['yaxis'].attrs['unit'] = attrs['motion_unit'][0]
grp.require_dataset('zaxis', (nz, ),
np.float32,
chunks=True)[:] = zaxis
grp['zaxis'].attrs['unit'] = attrs['motion_unit'][0]
else:
dimlabels = ['time']
grp.require_dataset('time', (nti, ),
np.float32,
chunks=True)
grp['time'][:] = time
grp['time'].attrs['unit'] = srcgrp['time'].attrs['unit']
grp['data'].attrs['unit'] = 'G'
ndestgrp['data'].attrs['unit'] = 'cm^{-3}'
tdestgrp['data'].attrs['unit'] = 'eV'
ndestgrp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
tdestgrp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
if verbose:
print("End of Sweept Langmuir routine!")
return True
def imgSeqRawToFull(src, dest):
with h5py.File(src.file, 'r') as sf:
#Get the datagroup
srcgrp = sf[src.group]
#Create dictionary of attributes
attrs = hdftools.readAttrs(srcgrp)
#Check for keys always required by this function
req_keys = ['dt']
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
nframes, nxpx, nypx, nchan = srcgrp['data'].shape
#Convert dt
dt = (attrs['dt'][0] * u.Unit(attrs['dt'][1])).to(u.s).value
#Reps is assumed to be 1 unless otherwise set
if 'nreps' in attrs.keys() and not np.isnan(attrs['nreps'][0]):
nreps = attrs['nreps'][0]
else:
nreps = 1
nti = int(nframes / nreps)
#t0 is the time of the first frame in the set
if 't0' in attrs.keys() and not np.isnan(attrs['t0'][0]):
t0 = (attrs['t0'][0] * u.Unit(attrs['t0'][1])).to(u.s).value
else:
t0 = 0
#Laser t0 is the time when the laser fires
#Time array will be shifted so this time is zero
if 'camera_delay' in attrs.keys() and not np.isnan(
attrs['camera_delay'][0]):
camera_delay = (attrs['camera_delay'][0] *
u.Unit(attrs['camera_delay'][1])).to(u.s).value
else:
camera_delay = 0
#dxdp is the pixel spacing in cm/px
if 'dxdp' in attrs.keys() and not np.isnan(attrs['dxdp'][0]):
dxdp = (attrs['dxdp'][0] * u.Unit(attrs['dxdp'][1])).to(u.cm).value
else:
dxdp = None
if 'dydp' in attrs.keys() and not np.isnan(attrs['dydp'][0]):
dydp = (attrs['dydp'][0] * u.Unit(attrs['dydp'][1])).to(u.cm).value
else:
dydp = None
if 'x0px' in attrs.keys() and not np.isnan(attrs['x0px'][0]):
x0px = (attrs['x0px'][0] * u.Unit(attrs['x0px'][1])).to(u.cm).value
else:
x0px = 0
if 'y0px' in attrs.keys() and not np.isnan(attrs['y0px'][0]):
y0px = (attrs['y0px'][0] * u.Unit(attrs['y0px'][1])).to(u.cm).value
else:
y0px = 0
with h5py.File(dest.file, 'a') as df:
destgrp = df.require_group(dest.group)
destgrp.require_dataset("data", (nti, nxpx, nypx, nreps, nchan),
np.float32,
chunks=(1, nxpx, nypx, 1, 1),
compression='gzip')
destgrp['data'].attrs['unit'] = ''
#Initialize time-remaining printout
tr = util.timeRemaining(nti, reportevery=5)
#Actually put the images into the file
for i in range(nti):
tr.updateTimeRemaining(i)
a = i * nreps
b = (i + 1) * nreps
#print(str(a) + ":" + str(b))
#Copy, re-shape, and write data to array
arr = srcgrp['data'][a:b, ...]
arr = np.moveaxis(arr, 0, 2)
#arr = np.reshape(arr, [nreps, nxpx, nypx, nchan])
destgrp['data'][i, ...] = arr
#Write the attrs dictioanry into attributes of the new data group
hdftools.writeAttrs(attrs, destgrp)
dimlabels = []
time = np.arange(nti) * dt + camera_delay - t0
destgrp.require_dataset('time', (nti, ), np.float32,
chunks=True)[:] = time
destgrp['time'].attrs['unit'] = 's'
dimlabels.append('time')
if dxdp is not None:
xaxis = (np.arange(nxpx) - x0px) * dxdp
destgrp.require_dataset('xaxis', (nxpx, ),
np.float32,
chunks=True)[:] = xaxis
destgrp['xaxis'].attrs['unit'] = 'cm'
dimlabels.append('xaxis')
else:
destgrp.require_dataset('xpixels', (nxpx, ),
np.float32,
chunks=True)[:] = np.arange(nxpx)
destgrp['xpixels'].attrs['unit'] = ''
dimlabels.append('xpixels')
if dydp is not None:
yaxis = (np.arange(nypx) - y0px) * dydp
destgrp.require_dataset('yaxis', (nypx, ),
np.float32,
chunks=True)[:] = yaxis
destgrp['yaxis'].attrs['unit'] = 'cm'
dimlabels.append('yaxis')
else:
destgrp.require_dataset('ypixels', (nypx, ),
np.float32,
chunks=True)[:] = np.arange(nypx)
destgrp['ypixels'].attrs['unit'] = ''
dimlabels.append('ypixels')
destgrp.require_dataset('reps', (nreps, ), np.float32,
chunks=True)[:] = np.arange(nreps)
destgrp['reps'].attrs['unit'] = ''
dimlabels.append('reps')
destgrp.require_dataset('chan', (nchan, ), np.float32,
chunks=True)[:] = np.arange(nchan)
destgrp['chan'].attrs['unit'] = ''
dimlabels.append('chan')
destgrp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
def lapdToRaw( run, probe, hdf_dir, csv_dir, dest, verbose=False,
trange=[0, -1]):
""" Retreives the appropriate metadata for a run and probe in a given data
directory, then reads in the data using the bapsflib module and saves
it in a new hdf5 file.
Parameters
----------
run: int
Run number
probe: str
Probe name
hdf_dir: str (path)
Path to the directory where HDF files are stored
csv_dir: str(path)
Path to the directory where metadata CSV's are stored
dest: hdfPath object
Path string to location data should be written out
verbose: boolean
Set this flag to true to enable print statements throughout the
code, including a runtime-until-completion estimate during the
data reading loop.
trange: [start_index, end_index]
Time range IN INDICES over which to load the data. -1 in the second
index will be translated to nti-1
Returns
-------
True, if execution is successful
"""
#Create a dictionary of attributes from the entire directory of CSV
#files that applies to this probe and run
attrs = csvtools.getAllAttrs(csv_dir, run, probe)
#Check that some required keys are present, throw a fatal error if not
req_keys = ['datafile', 'digitizer', 'adc']
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#Load some digitizer parameters we now know exist
digitizer = attrs['digitizer'][0]
adc = attrs['adc'][0]
#TODO: Should this file take a data_dir and determine the filename
#automatically, or should a source hdf file be given, leaving the program
#that calls this one to determine the HDF file name?
src = os.path.join(hdf_dir, attrs['datafile'][0] + '.hdf5')
#Create an array of channels (required input for bapsflib read_data)
# channel_arr = array of tuples of form: (digitizer, adc, board#, channel#)
# eg. channel_arr = ('SIS crate', 'SIS 3305', 2, 1)
#Do this in a loop, so the number of channels is flexible
#However, the number of 'brd' and 'chan' fields MUST match
#AND, the keys must be of the format 'brd1', 'chan1', etc.
channel_arr = []
nchan = 1
while True:
brdstr = 'brd' + str(int(nchan))
chanstr = 'chan' + str(int(nchan))
if brdstr in attrs.keys() and chanstr in attrs.keys():
#Check to make sure channel has actual non-nan values
if not np.isnan(attrs[brdstr][0]) and not np.isnan(attrs[chanstr][0]):
#Append the channel to the list to be extracted
channel_arr.append( (digitizer, adc, attrs[brdstr][0], attrs[chanstr][0]) )
nchan = nchan + 1
else:
break
#Determine the number of channels from the channel array
nchan = len(channel_arr)
#Read some variables from the src file
with bapsf_lapd.File(src, silent=True) as sf:
src_digitizers = sf.digitizers
digi = src_digitizers['SIS crate'] #Assume this id the digitizer: it is the only one
#Assume the adc, nti, etc. are all the same on all the channels.
#This line assumes that only one configuration is being used
#This is usually the case: if it is not, changes need to be made
daq_config = digi.active_configs[0]
name, info = digi.construct_dataset_name(channel_arr[0][2],
channel_arr[0][3],
adc=channel_arr[0][1],
config_name = daq_config,
return_info=True)
#Read out some digitizer parameters
nshots = info['nshotnum']
nti = info['nt']
#clock_rate = info['clock rate'].to(u.Hz)
#dt = ( 1.0 / clock_rate ).to(u.s)
sti = trange[0]
if trange[1] == -1:
eti = nti-1
else:
eti = trange[1]
nti = eti- sti
#Check if keys are provided to specify a motion list
# control = array of tuples of form (motion control, receptacle)
# eg. controls = [('6K Compumotor', receptacle)]
# note that 'receptacle' here is the receptacle NUMBER, 1 - indexed!)
req_keys = ['motion_controller', 'motion_receptacle']
if csvtools.missingKeys(attrs, req_keys, fatal_error = False):
print("Some motion keys not found: positon data will not be read out!")
controls, pos = None, None
else:
motion_controller = attrs['motion_controller'][0]
motion_receptacle = attrs['motion_receptacle'][0]
controls = [(motion_controller, motion_receptacle)]
#Check to see if the motion controller reported actually exists in the
#hdf file. If not, assume the probe was stationary (motion=None)
#If motion_controller isn't in this list, lapdReadHDF can't handle it
#Check if the motion controller provided is supported by the code and
if motion_controller in ['6K Compumotor', 'NI_XZ', 'NI_XYZ']:
pos, attrs = readPosArray(src, controls, attrs)
else:
controls, pos = None, None
#Create the destination file directory if necessary
hdftools.requireDirs(dest.file)
#Create the destination file
with h5py.File(dest.file, "a") as df:
#Create the dest group, throw error if it exists
if dest.group is not '/' and dest.group in df.keys():
raise hdftools.hdfGroupExists(dest)
grp = df[dest.group]
#Write the attrs dictioanry into attributes of the new data group
hdftools.writeAttrs(attrs, grp)
#Open the LAPD file and copy the data over
with bapsf_lapd.File(src, silent=True) as sf:
#Initialize the output data array
if 'data' in grp.keys():
raise hdftools.hdfDatasetExists(str(dest) + ' -> ' + "'data'")
#Create the dataset + associated attributes
grp.require_dataset("data", (nshots, nti, nchan), np.float32,
chunks=(1, np.min([nti, 20000]), 1),
compression='gzip')
grp['data'].attrs['unit'] = 'V'
dimlabels = ['shots', 'time', 'chan']
grp['data'].attrs['dimensions'] = [s.encode('utf-8') for s in dimlabels]
#Initialize time-remaining printout
tr = util.timeRemaining(nchan*nshots)
#Loop through the channels and shots, reading one-by-one into the
#output dataset
for chan in range(nchan):
channel = channel_arr[chan]
if verbose:
print("Reading channel: " + str(chan+1) + '/' + str(nchan))
for shot in range(nshots):
if verbose:
tr.updateTimeRemaining(nshots*chan + shot)
#Read the data through bapsflib
data = sf.read_data(channel[2], channel[3], digitizer =channel[0],
adc = channel[1], config_name = daq_config,
silent=True, shotnum=shot+1)
grp['data'][shot,:,chan] = data['signal'][0, sti:eti]
if shot == 0:
dt = data.dt #Adusted in bapsflib for clock rate, avging, etc.
grp.attrs['dt'] = [s.encode('utf-8') for s
in [str(dt.value), str(dt.unit)] ]
#If applicable, write the pos array to file
if pos is not None:
grp.require_dataset('pos', (nshots, 3), np.float32)[:] = pos
del pos
#Create the axes
grp.require_dataset('shots', (nshots,), np.float32, chunks=True )[:] = np.arange(nshots)
grp['shots'].attrs['unit'] = ''
t = np.arange(nti)*dt
grp.require_dataset('time', (nti,), np.float32, chunks=True)[:] = t.value
grp['time'].attrs['unit'] = str(t.unit)
grp.require_dataset('chan', (nchan,), np.float32, chunks=True)[:] = np.arange(nchan)
grp['chan'].attrs['unit'] = ''
#Clear the LAPD HDF file from memory
del(sf, data, t)
return dest
def hrrToRaw(run, probe, hdf_dir, csv_dir, dest, verbose=False, debug=False):
""" Retreives the appropriate metadata for a run and probe in a given data
directory, then reads in the data from the HRR hdf5 output file.
Parameters
----------
run: int
Run number
probe: str
Probe name
hdf_dir: str (path)
Path to the directory where HDF files are stored
csv_dir: str(path)
Path to the directory where metadata CSV's are stored
dest: hdfPath object
Path string to location data should be written out
verbose: boolean
Set this flag to true to enable print statements throughout the
code, including a runtime-until-completion estimate during the
data reading loop.
Returns
-------
dest (Filepath to destination file)
"""
#Create a dictionary of attributes from the entire directory of CSV
#files that applies to this probe and run
attrs = csvtools.getAllAttrs(csv_dir, run, probe)
#Check that some required keys are present, throw a fatal error if not
req_keys = ['datafile']
csvtools.missingKeys(attrs, req_keys, fatal_error=True)
#TODO: Should this file take a data_dir and determine the filename
#automatically, or should a source hdf file be given, leaving the program
#that calls this one to determine the HDF file name?
src = os.path.join(hdf_dir, attrs['datafile'][0] + '.hdf5')
#Create an array of channels
#channel_arr = tuples of form (resource number, channel number)
#Indexd from 1, to match load/LAPD.py
channel_arr = []
nchan = 1
while True:
digistr = 'resource' + str(int(nchan))
chanstr = 'chan' + str(int(nchan))
if chanstr in attrs.keys() and digistr in attrs.keys():
#Check to make sure channel has actual non-nan values
if not np.isnan(attrs[digistr][0]) and not np.isnan(
attrs[chanstr][0]):
#Append the channel to the list to be extracted
channel_arr.append((attrs[digistr][0], attrs[chanstr][0]))
nchan = nchan + 1
else:
break
if debug:
print("{:.0f} Data Channels found in csv".format(len(channel_arr)))
#Create a dictionary of position channels
#channel_arr = tuples of form (resource number, channel number)
ax = ['x', 'y', 'z']
pos_chan = {}
nchan = 1
for i in range(3):
digistr = ax[i] + 'pos_resource'
chanstr = ax[i] + 'pos_chan'
if chanstr in attrs.keys() and digistr in attrs.keys():
#Check to make sure channel has actual non-nan values
if not np.isnan(attrs[digistr][0]) and not np.isnan(
attrs[chanstr][0]):
#Append the channel to the list to be extracted
pos_chan[ax[i]] = (attrs[digistr][0], attrs[chanstr][0])
else:
pos_chan[ax[i]] = None
else:
pos_chan[ax[i]] = None
if debug:
print("{:.0f} Pos Channels found in csv".format(len(pos_chan)))
#Determine the number of channels from the channel array
nchan = len(channel_arr)
#Read some variables from the src file
with h5py.File(src, 'r') as sf:
digi_name = 'RESOURCE ' + str(channel_arr[0][0])
print(digi_name)
digigrp = sf[digi_name]
resource_type = digigrp.attrs['RESOURCE TYPE'].decode('utf-8')
attrs['RESOURCE ALIAS'] = (
digigrp.attrs['RESOURCE ALIAS'].decode('utf-8'), '')
attrs['RESOURCE DESCRIPTION'] = (
digigrp.attrs['RESOURCE DESCRIPTION'].decode('utf-8'), '')
attrs['RESOURCE ID'] = (digigrp.attrs['RESOURCE ID'], '')
attrs['RESOURCE MODEL'] = (
digigrp.attrs['RESOURCE MODEL'].decode('utf-8'), '')
attrs['RESOURCE TYPE'] = (resource_type, '')
resource_unit = digigrp['CHANNEL 0']['UNITS'][0].decode('utf-8')
attrs['motion_unit'] = ('mm', '')
if resource_type == 'SCOPE':
dataname = 'TRACE'
nshots = digigrp['CHANNEL 0'][dataname].shape[0]
nti = digigrp['CHANNEL 0'][dataname].shape[1]
dt = digigrp['CHANNEL 0'][dataname].attrs['WAVEFORM DT'] * u.s
attrs['dt'] = [str(dt.value), str(dt.unit)]
#attrs['dt'] = [s.encode('utf-8') for s
# in [str(dt.value), str(dt.unit) ] ]
elif resource_type == 'MOTOR BOARD':
dataname = 'POSITION'
nshots = digigrp['CHANNEL 0'][dataname].shape[0]
nti = 1
#Create the destination file
with h5py.File(dest.file, "a") as df:
#Create the dest group, throw error if it exists
if dest.group is not '/' and dest.group in df.keys():
raise hdftools.hdfGroupExists(dest)
grp = df[dest.group]
#Initialize the output data array
if 'data' in grp.keys():
raise hdftools.hdfDatasetExists(str(dest) + ' -> ' + "'data'")
#Create the dataset + associated attributes
grp.require_dataset("data", (nshots, nti, nchan),
np.float32,
chunks=(1, np.min([nti, 20000]), 1),
compression='gzip')
grp['data'].attrs['unit'] = resource_unit
dimlabels = ['shots', 'time', 'chan']
grp['data'].attrs['dimensions'] = [
s.encode('utf-8') for s in dimlabels
]
#Open the hdf5 file and copy the data over
with h5py.File(src) as sf:
#Initialize time-remaining printout
tr = util.timeRemaining(nchan * nshots)
#Loop through the channels and shots, reading one-by-one into the
#output dataset
for chan in range(nchan):
digi_name = 'RESOURCE ' + str(channel_arr[chan][0])
chan_name = 'CHANNEL ' + str(channel_arr[chan][1])
if verbose:
print("Reading channel: " + str(chan + 1) + '/' +
str(nchan))
for shot in range(nshots):
if verbose:
tr.updateTimeRemaining(nshots * chan + shot)
#Read the data from the hdf5 file
grp['data'][shot, :,
chan] = sf[digi_name][chan_name][dataname][
shot, ...]
if pos_chan['x'] is not None or pos_chan[
'y'] is not None or pos_chan['z'] is not None:
grp.require_dataset('pos', (nshots, 3), np.float32)
ax = ['x', 'y', 'z']
unit_factor = (1.0 * u.Unit(attrs['motion_unit'][0])).to(
u.cm).value
attrs['motion_unit'] = ('cm', '')
for i, a in enumerate(ax):
if pos_chan[a] is not None:
resname = 'RESOURCE ' + str(pos_chan[a][0])
channame = 'CHANNEL ' + str(int(pos_chan[a][1]))
try:
posdata = sf[resname][channame][
'POSITION'][:] * unit_factor
except KeyError:
print("(!) POSITION Information not found for " +
resname)
print(
"If motion is not included in run, set resource to NA in csv"
)
#Handle the case where the multiple data points were
#taken at a position so npos!=nshots
npos = posdata.size
if npos != nshots:
posdata = np.repeat(posdata, int(nshots / npos))
grp['pos'][:, i] = posdata
else:
grp['pos'][:, i] = np.zeros(nshots)
#Create the axes
grp.require_dataset('shots', (nshots, ), np.float32,
chunks=True)[:] = np.arange(nshots)
grp['shots'].attrs['unit'] = ''
grp.require_dataset('chan', (nchan, ), np.float32,
chunks=True)[:] = np.arange(nchan)
grp['chan'].attrs['unit'] = ''
if resource_type == 'SCOPE':
t = np.arange(nti) * dt
grp.require_dataset('time', (nti, ), np.float32,
chunks=True)[:] = t.value
grp['time'].attrs['unit'] = str(t.unit)
#Write the attrs dictioanry into attributes of the new data group
hdftools.writeAttrs(attrs, grp)
return dest