def getSliceCommand(filename):
if profile.getPreference('slicer').startswith('Slic3r') and getSlic3rExe() != False:
slic3rExe = getSlic3rExe()
if slic3rExe == False:
return False
cmd = [slic3rExe,
'--output-filename-format', '[input_filename_base]_export.gcode',
'--nozzle-diameter', str(profile.calculateEdgeWidth()),
'--print-center', '%s,%s' % (profile.getProfileSetting('machine_center_x'), profile.getProfileSetting('machine_center_y')),
'--z-offset', '0',
'--gcode-flavor', 'reprap',
'--gcode-comments',
'--filament-diameter', profile.getProfileSetting('filament_diameter'),
'--extrusion-multiplier', str(1.0 / float(profile.getProfileSetting('filament_density'))),
'--temperature', profile.getProfileSetting('print_temperature'),
'--travel-speed', profile.getProfileSetting('travel_speed'),
'--perimeter-speed', profile.getProfileSetting('print_speed'),
'--small-perimeter-speed', profile.getProfileSetting('print_speed'),
'--infill-speed', profile.getProfileSetting('print_speed'),
'--solid-infill-speed', profile.getProfileSetting('print_speed'),
'--bridge-speed', profile.getProfileSetting('print_speed'),
'--bottom-layer-speed-ratio', str(float(profile.getProfileSetting('bottom_layer_speed')) / float(profile.getProfileSetting('print_speed'))),
'--layer-height', profile.getProfileSetting('layer_height'),
'--first-layer-height-ratio', '1.0',
'--infill-every-layers', '1',
'--perimeters', str(profile.calculateLineCount()),
'--solid-layers', str(profile.calculateSolidLayerCount()),
'--fill-density', str(float(profile.getProfileSetting('fill_density'))/100),
'--fill-angle', '45',
'--fill-pattern', 'rectilinear', #rectilinear line concentric hilbertcurve archimedeanchords octagramspiral
'--solid-fill-pattern', 'rectilinear',
'--start-gcode', profile.getAlterationFilePath('start.gcode'),
'--end-gcode', profile.getAlterationFilePath('end.gcode'),
'--retract-length', profile.getProfileSetting('retraction_amount'),
'--retract-speed', str(int(float(profile.getProfileSetting('retraction_speed')))),
'--retract-restart-extra', profile.getProfileSetting('retraction_extra'),
'--retract-before-travel', profile.getProfileSetting('retraction_min_travel'),
'--retract-lift', '0',
'--slowdown-below-layer-time', profile.getProfileSetting('cool_min_layer_time'),
'--min-print-speed', profile.getProfileSetting('cool_min_feedrate'),
'--skirts', profile.getProfileSetting('skirt_line_count'),
'--skirt-distance', str(int(float(profile.getProfileSetting('skirt_gap')))),
'--skirt-height', '1',
'--scale', profile.getProfileSetting('model_scale'),
'--rotate', profile.getProfileSetting('model_rotate_base'),
'--duplicate-x', profile.getProfileSetting('model_multiply_x'),
'--duplicate-y', profile.getProfileSetting('model_multiply_y'),
'--duplicate-distance', '10']
if profile.getProfileSetting('support') != 'None':
cmd.extend(['--support-material'])
cmd.extend([filename])
return cmd
else:
pypyExe = getPyPyExe()
if pypyExe == False:
pypyExe = sys.executable
#In case we have a frozen exe, then argv[0] points to the executable, but we want to give pypy a real script file.
if hasattr(sys, 'frozen'):
mainScriptFile = os.path.abspath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "../..", "cura_sf.zip"))
else:
mainScriptFile = os.path.abspath(os.path.join(os.path.dirname(os.path.abspath(__file__)), "..", os.path.split(sys.argv[0])[1]))
cmd = [pypyExe, mainScriptFile, '-p', profile.getGlobalProfileString()]
if platform.system() == "Windows":
try:
cmd.append(str(filename))
except UnicodeEncodeError:
cmd.append("#UTF8#" + filename.encode("utf-8"))
else:
cmd.append(filename)
return cmd
def getSliceCommand(filename):
if profile.getPreference('slicer').startswith(
'Slic3r') and getSlic3rExe() != False:
slic3rExe = getSlic3rExe()
if slic3rExe == False:
return False
cmd = [
slic3rExe,
'--output-filename-format',
'[input_filename_base]_export.gcode',
'--nozzle-diameter',
str(profile.calculateEdgeWidth()),
'--print-center',
'%s,%s' % (profile.getProfileSetting('machine_center_x'),
profile.getProfileSetting('machine_center_y')),
'--z-offset',
'0',
'--gcode-flavor',
'reprap',
'--gcode-comments',
'--filament-diameter',
profile.getProfileSetting('filament_diameter'),
'--extrusion-multiplier',
str(1.0 / float(profile.getProfileSetting('filament_density'))),
'--temperature',
profile.getProfileSetting('print_temperature'),
'--travel-speed',
profile.getProfileSetting('travel_speed'),
'--perimeter-speed',
profile.getProfileSetting('print_speed'),
'--small-perimeter-speed',
profile.getProfileSetting('print_speed'),
'--infill-speed',
profile.getProfileSetting('print_speed'),
'--solid-infill-speed',
profile.getProfileSetting('print_speed'),
'--bridge-speed',
profile.getProfileSetting('print_speed'),
'--bottom-layer-speed-ratio',
str(
float(profile.getProfileSetting('bottom_layer_speed')) /
float(profile.getProfileSetting('print_speed'))),
'--layer-height',
profile.getProfileSetting('layer_height'),
'--first-layer-height-ratio',
'1.0',
'--infill-every-layers',
'1',
'--perimeters',
str(profile.calculateLineCount()),
'--solid-layers',
str(profile.calculateSolidLayerCount()),
'--fill-density',
str(float(profile.getProfileSetting('fill_density')) / 100),
'--fill-angle',
'45',
'--fill-pattern',
'rectilinear', #rectilinear line concentric hilbertcurve archimedeanchords octagramspiral
'--solid-fill-pattern',
'rectilinear',
'--start-gcode',
profile.getAlterationFilePath('start.gcode'),
'--end-gcode',
profile.getAlterationFilePath('end.gcode'),
'--retract-length',
profile.getProfileSetting('retraction_amount'),
'--retract-speed',
str(int(float(profile.getProfileSetting('retraction_speed')))),
'--retract-restart-extra',
profile.getProfileSetting('retraction_extra'),
'--retract-before-travel',
profile.getProfileSetting('retraction_min_travel'),
'--retract-lift',
'0',
'--slowdown-below-layer-time',
profile.getProfileSetting('cool_min_layer_time'),
'--min-print-speed',
profile.getProfileSetting('cool_min_feedrate'),
'--skirts',
profile.getProfileSetting('skirt_line_count'),
'--skirt-distance',
str(int(float(profile.getProfileSetting('skirt_gap')))),
'--skirt-height',
'1',
'--scale',
profile.getProfileSetting('model_scale'),
'--rotate',
profile.getProfileSetting('model_rotate_base'),
'--duplicate-x',
profile.getProfileSetting('model_multiply_x'),
'--duplicate-y',
profile.getProfileSetting('model_multiply_y'),
'--duplicate-distance',
'10'
]
if profile.getProfileSetting('support') != 'None':
cmd.extend(['--support-material'])
cmd.extend([filename])
return cmd
else:
pypyExe = getPyPyExe()
if pypyExe == False:
pypyExe = sys.executable
#In case we have a frozen exe, then argv[0] points to the executable, but we want to give pypy a real script file.
if hasattr(sys, 'frozen'):
mainScriptFile = os.path.abspath(
os.path.join(os.path.dirname(os.path.abspath(__file__)),
"../..", "cura_sf.zip"))
else:
mainScriptFile = os.path.abspath(
os.path.join(os.path.dirname(os.path.abspath(__file__)), "..",
os.path.split(sys.argv[0])[1]))
cmd = [pypyExe, mainScriptFile, '-p', profile.getGlobalProfileString()]
cmd.append(filename)
return cmd
def calculateSolidLayerCount(setting): return profile.calculateSolidLayerCount()
def _engineSettings(self, extruderCount):
settings = {
'layerThickness':
int(profile.getProfileSettingFloat('layer_height') * 1000),
'initialLayerThickness':
int(profile.getProfileSettingFloat('bottom_thickness') * 1000) if
profile.getProfileSettingFloat('bottom_thickness') > 0.0 else int(
profile.getProfileSettingFloat('layer_height') * 1000),
'filamentDiameter':
int(profile.getProfileSettingFloat('filament_diameter') * 1000),
'filamentFlow':
int(profile.getProfileSettingFloat('filament_flow')),
'extrusionWidth':
int(profile.calculateEdgeWidth() * 1000),
'insetCount':
int(profile.calculateLineCount()),
'downSkinCount':
int(profile.calculateSolidLayerCount())
if profile.getProfileSetting('solid_bottom') == 'True' else 0,
'upSkinCount':
int(profile.calculateSolidLayerCount())
if profile.getProfileSetting('solid_top') == 'True' else 0,
'infillOverlap':
int(profile.getProfileSettingFloat('fill_overlap')),
'initialSpeedupLayers':
int(4),
'initialLayerSpeed':
int(profile.getProfileSettingFloat('bottom_layer_speed')),
'printSpeed':
int(profile.getProfileSettingFloat('print_speed')),
'infillSpeed':
int(profile.getProfileSettingFloat('infill_speed')) if
int(profile.getProfileSettingFloat('infill_speed')) > 0 else int(
profile.getProfileSettingFloat('print_speed')),
'moveSpeed':
int(profile.getProfileSettingFloat('travel_speed')),
'fanSpeedMin':
int(profile.getProfileSettingFloat('fan_speed'))
if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'fanSpeedMax':
int(profile.getProfileSettingFloat('fan_speed_max'))
if profile.getProfileSetting('fan_enabled') == 'True' else 0,
'supportAngle':
int(-1) if profile.getProfileSetting('support') == 'None' else int(
profile.getProfileSettingFloat('support_angle')),
'supportEverywhere':
int(1) if profile.getProfileSetting('support') == 'Everywhere' else
int(0),
'supportLineDistance':
int(100 * profile.calculateEdgeWidth() * 1000 /
profile.getProfileSettingFloat('support_fill_rate'))
if profile.getProfileSettingFloat('support_fill_rate') > 0 else -1,
'supportXYDistance':
int(1000 * profile.getProfileSettingFloat('support_xy_distance')),
'supportZDistance':
int(1000 * profile.getProfileSettingFloat('support_z_distance')),
'supportExtruder':
0 if profile.getProfileSetting('support_dual_extrusion')
== 'First extruder' else
(1 if profile.getProfileSetting('support_dual_extrusion') ==
'Second extruder' and profile.minimalExtruderCount() > 1 else -1),
'retractionAmount':
int(profile.getProfileSettingFloat('retraction_amount') * 1000)
if profile.getProfileSetting('retraction_enable') == 'True' else 0,
'retractionSpeed':
int(profile.getProfileSettingFloat('retraction_speed')),
'retractionMinimalDistance':
int(
profile.getProfileSettingFloat('retraction_min_travel') *
1000),
'retractionAmountExtruderSwitch':
int(
profile.getProfileSettingFloat('retraction_dual_amount') *
1000),
'minimalExtrusionBeforeRetraction':
int(
profile.getProfileSettingFloat('retraction_minimal_extrusion')
* 1000),
'enableCombing':
1 if profile.getProfileSetting('retraction_combing') == 'True' else
0,
'multiVolumeOverlap':
int(profile.getProfileSettingFloat('overlap_dual') * 1000),
'objectSink':
int(profile.getProfileSettingFloat('object_sink') * 1000),
'minimalLayerTime':
int(profile.getProfileSettingFloat('cool_min_layer_time')),
'minimalFeedrate':
int(profile.getProfileSettingFloat('cool_min_feedrate')),
'coolHeadLift':
1 if profile.getProfileSetting('cool_head_lift') == 'True' else 0,
'startCode':
profile.getAlterationFileContents('start.gcode', extruderCount),
'endCode':
profile.getAlterationFileContents('end.gcode', extruderCount),
'extruderOffset[1].X':
int(profile.getMachineSettingFloat('extruder_offset_x1') * 1000),
'extruderOffset[1].Y':
int(profile.getMachineSettingFloat('extruder_offset_y1') * 1000),
'extruderOffset[2].X':
int(profile.getMachineSettingFloat('extruder_offset_x2') * 1000),
'extruderOffset[2].Y':
int(profile.getMachineSettingFloat('extruder_offset_y2') * 1000),
'extruderOffset[3].X':
int(profile.getMachineSettingFloat('extruder_offset_x3') * 1000),
'extruderOffset[3].Y':
int(profile.getMachineSettingFloat('extruder_offset_y3') * 1000),
'fixHorrible':
0,
}
fanFullHeight = int(
profile.getProfileSettingFloat('fan_full_height') * 1000)
settings['fanFullOnLayerNr'] = (fanFullHeight -
settings['initialLayerThickness'] -
1) / settings['layerThickness'] + 1
if settings['fanFullOnLayerNr'] < 0:
settings['fanFullOnLayerNr'] = 0
if profile.getProfileSettingFloat('fill_density') == 0:
settings['sparseInfillLineDistance'] = -1
elif profile.getProfileSettingFloat('fill_density') == 100:
settings['sparseInfillLineDistance'] = settings['extrusionWidth']
#Set the up/down skins height to 10000 if we want a 100% filled object.
# This gives better results then normal 100% infill as the sparse and up/down skin have some overlap.
settings['downSkinCount'] = 10000
settings['upSkinCount'] = 10000
else:
settings['sparseInfillLineDistance'] = int(
100 * profile.calculateEdgeWidth() * 1000 /
profile.getProfileSettingFloat('fill_density'))
if profile.getProfileSetting('platform_adhesion') == 'Brim':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = int(
profile.getProfileSettingFloat('brim_line_count'))
elif profile.getProfileSetting('platform_adhesion') == 'Raft':
settings['skirtDistance'] = 0
settings['skirtLineCount'] = 0
settings['raftMargin'] = int(
profile.getProfileSettingFloat('raft_margin') * 1000)
settings['raftLineSpacing'] = int(
profile.getProfileSettingFloat('raft_line_spacing') * 1000)
settings['raftBaseThickness'] = int(
profile.getProfileSettingFloat('raft_base_thickness') * 1000)
settings['raftBaseLinewidth'] = int(
profile.getProfileSettingFloat('raft_base_linewidth') * 1000)
settings['raftInterfaceThickness'] = int(
profile.getProfileSettingFloat('raft_interface_thickness') *
1000)
settings['raftInterfaceLinewidth'] = int(
profile.getProfileSettingFloat('raft_interface_linewidth') *
1000)
else:
settings['skirtDistance'] = int(
profile.getProfileSettingFloat('skirt_gap') * 1000)
settings['skirtLineCount'] = int(
profile.getProfileSettingFloat('skirt_line_count'))
settings['skirtMinLength'] = int(
profile.getProfileSettingFloat('skirt_minimal_length') * 1000)
if profile.getProfileSetting(
'fix_horrible_union_all_type_a') == 'True':
settings['fixHorrible'] |= 0x01
if profile.getProfileSetting(
'fix_horrible_union_all_type_b') == 'True':
settings['fixHorrible'] |= 0x02
if profile.getProfileSetting('fix_horrible_use_open_bits') == 'True':
settings['fixHorrible'] |= 0x10
if profile.getProfileSetting(
'fix_horrible_extensive_stitching') == 'True':
settings['fixHorrible'] |= 0x04
if settings['layerThickness'] <= 0:
settings['layerThickness'] = 1000
if profile.getMachineSetting('gcode_flavor') == 'UltiGCode':
settings['gcodeFlavor'] = 1
if profile.getProfileSetting('spiralize') == 'True':
settings['spiralizeMode'] = 1
if profile.getProfileSetting('wipe_tower') == 'True':
settings['wipeTowerSize'] = int(
math.sqrt(
profile.getProfileSettingFloat('wipe_tower_volume') *
1000 * 1000 * 1000 / settings['layerThickness']))
if profile.getProfileSetting('ooze_shield') == 'True':
settings['enableOozeShield'] = 1
return settings
