def setup():
printOctopus()
print("Hello, this will help you initialize your ESP")
print("ver: " + ver + " (c)octopusLAB")
print("Press Ctrl+C to abort")
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.mkdir('config')
run = True
while run:
sele = setupMenu()
if sele == "x":
print("Setup - exit >")
time.sleep_ms(2000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "w":
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
sel_w = wifiMenu()
if sel_w == "a":
wifi_ssid = input("SSID: ")
wifi_pass = input("PASSWORD: "******"r":
wifi_ssid = input("SSID: ")
w.remove_network(wifi_ssid)
if sel_w == "s":
print("Saved wifi networks")
for k, v in w.config['networks'].items():
print("SSID: {0}".format(k))
if sele == "cw":
print("Connect WiFi >")
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
if w.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
if sele == "cl":
print("Connect LAN >")
import network
lan = network.LAN(mdc=machine.Pin(23),
mdio=machine.Pin(18),
phy_type=network.PHY_LAN8720,
phy_addr=1,
clock_mode=network.ETH_CLOCK_GPIO17_OUT)
lan.active(1)
retry = 0
while not lan.isconnected() or lan.ifconfig()[0] is '0.0.0.0':
retry += 1
time.sleep_ms(500)
if retry > 20:
break
if lan.isconnected():
print("LAN: OK")
else:
print("LAN: Connect error, check cable or DHCP server")
if sele == "sd":
shutil()
deplUrl = "https://octopusengine.org/download/micropython/stable.tar"
deploy(deplUrl)
def setup():
mainOctopus()
print("Hello, this will help you initialize your ESP")
print("ver: " + ver + " (c)octopusLAB")
print("Press Ctrl+C to abort")
# TODO improve this
# prepare directory
if 'config' not in uos.listdir():
uos.mkdir('config')
run = True
while run:
sele = setupMenu()
if sele == "q":
print("Setup - quit >")
time.sleep_ms(1000)
print("all OK, press CTRL+D to soft reboot")
run = False
if sele == "si": #system_info()
from util.sys_info import sys_info
sys_info()
if sele == "ds":
print("Device setting:")
print(" board_type | soc_type (system on the board)")
i = 0
for di in devices:
print(str(i) + ": " + str(di[0]) + " | " + str(di[1]))
i = i + 1
print()
sd = input("select: ")
#print(str(devices[int(sd)]))
print("> " + str(devices[int(sd)][0]) + " | " +
str(devices[int(sd)][1]))
dc = {}
dc['board_type'] = str(
devices[int(sd)][0]
) #input("Board type ('oLAB RobotBoard1' or 'oLAB IoTBoard1'): ")
dc['soc_type'] = str(devices[int(
sd)][1]) #input("SoC type ('esp32' or 'esp8266'): ")
print("Writing to file config/device.json")
with open('config/device.json', 'w') as f:
ujson.dump(dc, f)
# ujson.dump(wc, f, ensure_ascii=False, indent=4)
if sele == "ios":
print("I/O setting:")
# io menu
ioMenu()
if sele == "iot":
print("Testing I/O")
from util import io_test
io_test.all()
if sele == "w":
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
sel_w = wifiMenu()
if sel_w == "a":
wifi_ssid = input("SSID: ")
wifi_pass = input("PASSWORD: "******"r":
wifi_ssid = input("SSID: ")
w.remove_network(wifi_ssid)
if sel_w == "s":
print("Saved wifi networks")
for k, v in w.config['networks'].items():
print("SSID: {0}".format(k))
if sele == "cw":
print("Connect WiFi >")
from util.wifi_connect import WiFiConnect
w = WiFiConnect()
if w.connect():
print("WiFi: OK")
else:
print("WiFi: Connect error, check configuration")
if sele == "cl":
print("Connect LAN >")
import network
lan = network.LAN(mdc=machine.Pin(23),
mdio=machine.Pin(18),
phy_type=network.PHY_LAN8720,
phy_addr=1,
clock_mode=network.ETH_CLOCK_GPIO17_OUT)
lan.active(1)
retry = 0
while not lan.isconnected() or lan.ifconfig()[0] is '0.0.0.0':
retry += 1
time.sleep_ms(500)
if retry > 20:
break
if lan.isconnected():
print("LAN: OK")
else:
print("LAN: Connect error, check cable or DHCP server")
if sele == "mq":
print("mqtt setup >")
try:
print()
from util.mqtt import mqtt
mqtt()
except:
print("Err.mqtt() or 'util.mqtt.py' does not exist")
if sele == "st":
print("Time setting >")
rtc = machine.RTC()
print(str(rtc.datetime()))
setdatetime = input(
"input 6 numbers - format: RRRRR,M,D,wd,h,m > ") + (",0,0")
dt_str = setdatetime.split(",")
print(str(dt_str))
dt_int = [int(numeric_string) for numeric_string in dt_str]
rtc.init(dt_int)
print(str(rtc.datetime()))
if sele == "sd":
shutil()
deplUrl = "https://octopusengine.org/download/micropython/stable.tar"
deploy(deplUrl)
if sele == "sde":
shutil()
deplUrl = "https://octopusengine.org/download/micropython/examples.tar"
deploy(deplUrl)
if sele == "sdp":
shutil()
deplUrl = "http://iot.petrkr.net/olab/latest.tar"
deploy(deplUrl)
if sele == "sdo":
shutil()
deplUrl = "https://octopusengine.org/download/latest.tar"
deploy(deplUrl)
if sele == "sdh":
shutil()
deplUrl = "https://octopusengine.org/download/hydroponics.tar"
deploy(deplUrl)
if sele == "wr":
print("under reconstruction <")
import esp
esp.osdebug(None)
import webrepl
webrepl.start()