def _test_drop_on_existing_assembly(browser):
project_dict, workspace_page = startup(browser)
assembly = workspace_page.find_library_button('Assembly')
outer_name = put_assembly_on_grid(workspace_page)
outer_figure = workspace_page.get_dataflow_figure(outer_name)
outer_path = outer_figure.pathname
eq(outer_path, outer_name,
"Assembly did not produce an instance on the grid")
div = getDropableElements(outer_figure)[0]
chain = drag_element_to(browser, assembly, div, False)
check_highlighting(
outer_figure('content_area').element, True, "Assembly's content_area")
release(chain)
middle_name = NameInstanceDialog(workspace_page).create_and_dismiss()
middle_figure = workspace_page.get_dataflow_figure(middle_name)
middle_path = middle_figure.pathname
eq(middle_path, outer_path + '.' + middle_name,
"Assembly did not produce an instance inside outer Assembly")
div = getDropableElements(middle_figure)[0]
chain = drag_element_to(browser, assembly, div, True)
check_highlighting(
middle_figure('content_area').element, True, "Assembly's content_area")
release(chain)
inner_name = NameInstanceDialog(workspace_page).create_and_dismiss()
#expand the middle div so that the inner one shows up in the workspace.
middle_figure('top_right').element.click()
inner_figure = workspace_page.get_dataflow_figure(inner_name)
inner_path = inner_figure.pathname
eq(inner_path, middle_path + '.' + inner_name,
"Assembly did not produce an instance inside of the middle Assembly")
ensure_names_in_workspace(
workspace_page, [outer_name, middle_name, inner_name],
"Dragging Assembly onto Assembly did not create a new instance on page"
)
closeout(project_dict, workspace_page)
def _test_drop_on_existing_assembly(browser):
project_dict, workspace_page = startup(browser)
assembly = workspace_page.find_library_button('Assembly')
outer_name = put_assembly_on_grid(workspace_page)
outer_figure = workspace_page.get_dataflow_figure(outer_name)
outer_path = outer_figure.pathname
eq(outer_path, outer_name, "Assembly did not produce an instance on the grid")
div = getDropableElements(outer_figure)[0]
chain = drag_element_to(browser, assembly, div, False)
check_highlighting(outer_figure('content_area').element, True,
"Assembly's content_area")
release(chain)
middle_name = NameInstanceDialog(workspace_page).create_and_dismiss()
middle_figure = workspace_page.get_dataflow_figure(middle_name)
middle_path = middle_figure.pathname
eq(middle_path, outer_path + '.' + middle_name,
"Assembly did not produce an instance inside outer Assembly")
div = getDropableElements(middle_figure)[0]
chain = drag_element_to(browser, assembly, div, True)
check_highlighting(middle_figure('content_area').element, True,
"Assembly's content_area")
release(chain)
inner_name = NameInstanceDialog(workspace_page).create_and_dismiss()
#expand the middle div so that the inner one shows up in the workspace.
middle_figure('top_right').element.click()
inner_figure = workspace_page.get_dataflow_figure(inner_name)
inner_path = inner_figure.pathname
eq(inner_path, middle_path + '.' + inner_name,
"Assembly did not produce an instance inside of the middle Assembly")
ensure_names_in_workspace(workspace_page, [outer_name, middle_name, inner_name],
"Dragging Assembly onto Assembly did not create a new instance on page")
closeout(project_dict, workspace_page)
def _test_drop_on_component_editor(browser):
project_dict, workspace_page = startup(browser)
#find and get the 'assembly', and 'top' objects
workspace_page.set_library_filter('Assembly') # put Assembly at top of lib
assembly = workspace_page.find_library_button('Assembly')
top = workspace_page.get_dataflow_figure('top', '')
editor = top.editor_page(double_click=False, base_type='Assembly')
editor.show_dataflow()
#in order to get the elements in the editor workflow, we must
#distinguish them from the elements in the main workflow
editor_top = get_dataflow_fig_in_assembly_editor(workspace_page, 'top')
# sort through these to find the correct 'top'
names = []
for div in getDropableElements(editor_top)[:-1]:
chain = drag_element_to(browser, assembly, div, False)
check_highlighting(
editor_top('content_area').element, True,
"Top in component editor's content_area")
release(chain)
#deal with the modal dialog
name = NameInstanceDialog(workspace_page).create_and_dismiss()
names.append(name)
ensure_names_in_workspace(
workspace_page, names,
"Dragging 'assembly' to 'top' (in component editor) in one of the "
"drop areas did not produce a new element on page")
#now test to see if all the new elements are children of 'top'
#generate what the pathnames SHOULD be
guess_pathnames = ["top." + name for name in names]
#get the actual pathnames
figs = workspace_page.get_dataflow_figures()
pathnames = [get_pathname(browser, fig) for fig in figs]
# see if they match up! (keeping in mind that there are more elements
# we have pathnames for than we put there)
for path in guess_pathnames:
eq(
path in pathnames, True,
"An element did not drop into 'top' (in component editor) when "
"dragged onto one of its drop areas.\nIt was created somewhere else"
)
closeout(project_dict, workspace_page)
def _test_drop_on_component_editor(browser):
project_dict, workspace_page = startup(browser)
#find and get the 'assembly', and 'top' objects
workspace_page.set_library_filter('Assembly') # put Assembly at top of lib
assembly = workspace_page.find_library_button('Assembly')
top = workspace_page.get_dataflow_figure('top', '')
editor = top.editor_page(double_click=False, base_type='Assembly')
editor.show_dataflow()
#in order to get the elements in the editor workflow, we must
#distinguish them from the elements in the main workflow
editor_top = get_dataflow_fig_in_assembly_editor(workspace_page, 'top')
# sort through these to find the correct 'top'
names = []
for div in getDropableElements(editor_top)[:-1]:
chain = drag_element_to(browser, assembly, div, False)
check_highlighting(editor_top('content_area').element, True,
"Top in component editor's content_area")
release(chain)
#deal with the modal dialog
name = NameInstanceDialog(workspace_page).create_and_dismiss()
names.append(name)
ensure_names_in_workspace(workspace_page, names,
"Dragging 'assembly' to 'top' (in component editor) in one of the "
"drop areas did not produce a new element on page")
#now test to see if all the new elements are children of 'top'
#generate what the pathnames SHOULD be
guess_pathnames = ["top." + name for name in names]
#get the actual pathnames
figs = workspace_page.get_dataflow_figures()
pathnames = [get_pathname(browser, fig) for fig in figs]
# see if they match up! (keeping in mind that there are more elements
# we have pathnames for than we put there)
for path in guess_pathnames:
eq(path in pathnames, True,
"An element did not drop into 'top' (in component editor) when "
"dragged onto one of its drop areas.\nIt was created somewhere else")
closeout(project_dict, workspace_page)
def _test_workspace_dragdrop(browser):
project_dict, workspace_page = startup(browser)
#find and get the 'assembly', and 'top' objects
assembly = workspace_page.find_library_button('Assembly')
top = workspace_page.get_dataflow_figure('top')
names = []
for div in getDropableElements(top):
chain = drag_element_to(browser, assembly, div, False)
check_highlighting(
top('content_area').element, True, "Top's content_area")
release(chain)
#deal with the modal dialog
name = NameInstanceDialog(workspace_page).create_and_dismiss()
names.append(name)
ensure_names_in_workspace(
workspace_page, names,
"Dragging 'assembly' to 'top' in one of the drop areas did not "
"produce a new element on page")
# now test to see if all the new elements are children of 'top'
# generate what the pathnames SHOULD be
guess_pathnames = ["top." + name for name in names]
# get the actual pathnames
figs = workspace_page.get_dataflow_figures()
pathnames = [get_pathname(browser, fig) for fig in figs]
# see if they match up! (keeping in mind that there are more elements
# we have pathnames for than we put there)
for path in guess_pathnames:
eq(
path in pathnames, True, "An element did not drop into 'top' when "
"dragged onto one of its drop areas.\nIt was created somewhere else"
)
closeout(project_dict, workspace_page)
def _test_workspace_dragdrop(browser):
project_dict, workspace_page = startup(browser)
#find and get the 'assembly', and 'top' objects
assembly = workspace_page.find_library_button('Assembly')
top = workspace_page.get_dataflow_figure('top')
names = []
for div in getDropableElements(top):
chain = drag_element_to(browser, assembly, div, False)
check_highlighting(top('content_area').element, True,
"Top's content_area")
release(chain)
#deal with the modal dialog
name = NameInstanceDialog(workspace_page).create_and_dismiss()
names.append(name)
ensure_names_in_workspace(workspace_page, names,
"Dragging 'assembly' to 'top' in one of the drop areas did not "
"produce a new element on page")
# now test to see if all the new elements are children of 'top'
# generate what the pathnames SHOULD be
guess_pathnames = ["top." + name for name in names]
# get the actual pathnames
figs = workspace_page.get_dataflow_figures()
pathnames = [get_pathname(browser, fig) for fig in figs]
# see if they match up! (keeping in mind that there are more elements
# we have pathnames for than we put there)
for path in guess_pathnames:
eq(path in pathnames, True, "An element did not drop into 'top' when "
"dragged onto one of its drop areas.\nIt was created somewhere else")
closeout(project_dict, workspace_page)
def _test_drop_onto_layered_div(browser):
project_dict, workspace_page = startup(browser)
# Add paraboloid and vehicle_threesim files
file1_path = pkg_resources.resource_filename('openmdao.examples.simple',
'paraboloid.py')
file2_path = pkg_resources.resource_filename(
'openmdao.examples.enginedesign', 'vehicle_threesim.py')
workspace_page.add_file(file1_path)
workspace_page.add_file(file2_path)
# add VehicleSim2 to the globals
sim_name = put_element_on_grid(workspace_page, 'VehicleSim2')
# add Paraboloid to VehicleSim dataflow assembly
sim = workspace_page.get_dataflow_figure(sim_name)
paraboloid = workspace_page.find_library_button('Paraboloid')
chain = drag_element_to(browser, paraboloid,
sim('content_area').element, False)
release(chain)
paraboloid_name = NameInstanceDialog(workspace_page).create_and_dismiss()
paraboloid_pathname = sim_name + "." + paraboloid_name
# Open up the component editor for the sim_EPA_city inside the vehicle sim
sim_EPA_city_driver = workspace_page.get_dataflow_figure(
'sim_EPA_city', sim_name)
driver_editor = sim_EPA_city_driver.editor_page(base_type='Driver')
driver_editor.move(-200, 0)
driver_editor.show_workflow()
# Confirm expected number of workflow component figures before adding one
eq(len(driver_editor.get_workflow_component_figures()), 5)
eq(len(workspace_page.get_workflow_component_figures()), 22)
# Drop onto the object editor's workflow figure is no longer supported.
# -- KTM
# Drag paraboloid component into sim_EPA_city workflow
#workspace_page('dataflow_tab').click()
#workspace_page.expand_object(sim_name)
#simsim_name = sim_name + '.' + 'sim_EPA_city'
#workspace_page.add_object_to_workflow(paraboloid_pathname, simsim_name)
## Confirm there is one more workflow component figure in the editor
#workspace_page('workflow_tab').click()
#eq(len(driver_editor.get_workflow_component_figures()), 6)
## Confirm two more workflow component figures in the workspace as a whole
#eq(len(workspace_page.get_workflow_component_figures()), 24)
## Confirm that the paraboloid has been added to the sim_EPA_city workflow
## by trying to access it.
#obj = workspace_page.find_object_button(simsim_name + "." + paraboloid_name)
# Don't see the reason to verfiy again that you can't add something to an
# out-of-scope workflow. -- KTM
## Try dragging paraboloid component into vehicle workflow under sim_EPA_city
## should NOT add to the list of workflow component figures
#workspace_page.expand_object(sim_name)
#paraboloid_component = workspace_page.find_object_button(paraboloid_pathname)
#vehicle_workflow_figure = workspace_page.get_workflow_figure("vehicle.driver")
#chain = drag_element_to(browser, paraboloid_component,
#vehicle_workflow_figure.components[0], True)
#assert not vehicle_workflow_figure.highlighted
#release(chain)
## Confirm that there is NOT a new workflow component figure in either place
#eq(len(driver_editor.get_workflow_component_figures()), 6)
#eq(len(workspace_page.get_workflow_component_figures()), 24)
## Confirm that the paraboloid has NOT been added to the vehicle workflow
#assert paraboloid_name not in vehicle_workflow_figure.component_names
# Clean up.
closeout(project_dict, workspace_page)
def _test_component_to_complex_workflow(browser):
project_dict, workspace_page = startup(browser)
# Add paraboloid and vehicle_threesim files
file1_path = pkg_resources.resource_filename('openmdao.examples.simple',
'paraboloid.py')
file2_path = pkg_resources.resource_filename(
'openmdao.examples.enginedesign', 'vehicle_threesim.py')
workspace_page.add_file(file1_path)
workspace_page.add_file(file2_path)
# create an instance of VehicleSim2
sim_name = put_element_on_grid(workspace_page, "VehicleSim2")
# Drag paraboloid element into sim dataflow figure
sim = workspace_page.get_dataflow_figure(sim_name)
paraboloid = workspace_page.find_library_button('Paraboloid')
chain = drag_element_to(browser, paraboloid,
sim('content_area').element, False)
release(chain)
paraboloid_name = NameInstanceDialog(workspace_page).create_and_dismiss()
paraboloid_pathname = sim_name + "." + paraboloid_name
# Switch to Workflow pane and show the sim workflow
workspace_page('workflow_tab').click()
workspace_page.show_workflow(sim_name)
# See how many workflow component figures there are before we add to it
eq(len(workspace_page.get_workflow_component_figures()), 16)
############################################################################
# Drop paraboloid component onto the top level workflow for sim
############################################################################
workspace_page('dataflow_tab').click()
workspace_page.expand_object(sim_name)
workspace_page.add_object_to_workflow(paraboloid_pathname, sim_name)
# Confirm that there is one more workflow component figure
workspace_page('workflow_tab').click()
eq(len(workspace_page.get_workflow_component_figures()), 17)
# Confirm that the paraboloid has been added to the sim workflow by trying
# to access it.
obj = workspace_page.find_object_button(sim_name + "." + paraboloid_name)
############################################################################
# Drop paraboloid component onto the sim_acc workflow under sim
############################################################################
workspace_page('dataflow_tab').click()
simsim_name = sim_name + '.sim_acc'
workspace_page.add_object_to_workflow(paraboloid_pathname, simsim_name)
# Confirm that there is one more workflow component figure
workspace_page('workflow_tab').click()
eq(len(workspace_page.get_workflow_component_figures()), 18)
# Confirm that the paraboloid has been added to the sim workflow by trying
# to access it.
obj = workspace_page.find_object_button(sim_name + "." + paraboloid_name)
############################################################################
# Drop paraboloid component onto the vehicle workflow under sim_acc
# This should NOT work since the paraboloid is not in the vehicle assembly
############################################################################
# These error messages are tested in SequentialFlow, though we may want
# to have one test that makes sure that the error dialog makes it through.
#workspace_page('dataflow_tab').click()
#workspace_page.expand_object(simsim_name)
#simsimsim_name = simsim_name + '.vehicle'
#workspace_page.add_object_to_workflow(paraboloid_pathname, simsimsim_name)
#message = NotifierPage.wait(workspace_page)
#eq(message, "x")
# Confirm that there is NOT a new workflow component figure
#workspace_page('workflow_tab').click()
#eq(len(workspace_page.get_workflow_component_figures()), 18)
# Clean up.
closeout(project_dict, workspace_page)
def _test_drop_onto_layered_div(browser):
project_dict, workspace_page = startup(browser)
# Add paraboloid and vehicle_threesim files
file1_path = pkg_resources.resource_filename('openmdao.examples.simple',
'paraboloid.py')
file2_path = pkg_resources.resource_filename('openmdao.examples.enginedesign',
'vehicle_threesim.py')
workspace_page.add_file(file1_path)
workspace_page.add_file(file2_path)
# add VehicleSim2 to the globals
sim_name = put_element_on_grid(workspace_page, 'VehicleSim2')
# add Paraboloid to VehicleSim dataflow assembly
sim = workspace_page.get_dataflow_figure(sim_name)
paraboloid = workspace_page.find_library_button('Paraboloid')
chain = drag_element_to(browser, paraboloid,
sim('content_area').element, False)
release(chain)
paraboloid_name = NameInstanceDialog(workspace_page).create_and_dismiss()
paraboloid_pathname = sim_name + "." + paraboloid_name
# Open up the component editor for the sim_EPA_city inside the vehicle sim
sim_EPA_city_driver = workspace_page.get_dataflow_figure('sim_EPA_city',
sim_name)
driver_editor = sim_EPA_city_driver.editor_page(base_type='Driver')
driver_editor.move(-200, 0)
driver_editor.show_workflow()
# Confirm expected number of workflow component figures before adding one
eq(len(driver_editor.get_workflow_component_figures()), 5)
eq(len(workspace_page.get_workflow_component_figures()), 22)
# Drop onto the object editor's workflow figure is no longer supported.
# -- KTM
# Drag paraboloid component into sim_EPA_city workflow
#workspace_page('dataflow_tab').click()
#workspace_page.expand_object(sim_name)
#simsim_name = sim_name + '.' + 'sim_EPA_city'
#workspace_page.add_object_to_workflow(paraboloid_pathname, simsim_name)
## Confirm there is one more workflow component figure in the editor
#workspace_page('workflow_tab').click()
#eq(len(driver_editor.get_workflow_component_figures()), 6)
## Confirm two more workflow component figures in the workspace as a whole
#eq(len(workspace_page.get_workflow_component_figures()), 24)
## Confirm that the paraboloid has been added to the sim_EPA_city workflow
## by trying to access it.
#obj = workspace_page.find_object_button(simsim_name + "." + paraboloid_name)
# Don't see the reason to verfiy again that you can't add something to an
# out-of-scope workflow. -- KTM
## Try dragging paraboloid component into vehicle workflow under sim_EPA_city
## should NOT add to the list of workflow component figures
#workspace_page.expand_object(sim_name)
#paraboloid_component = workspace_page.find_object_button(paraboloid_pathname)
#vehicle_workflow_figure = workspace_page.get_workflow_figure("vehicle.driver")
#chain = drag_element_to(browser, paraboloid_component,
#vehicle_workflow_figure.components[0], True)
#assert not vehicle_workflow_figure.highlighted
#release(chain)
## Confirm that there is NOT a new workflow component figure in either place
#eq(len(driver_editor.get_workflow_component_figures()), 6)
#eq(len(workspace_page.get_workflow_component_figures()), 24)
## Confirm that the paraboloid has NOT been added to the vehicle workflow
#assert paraboloid_name not in vehicle_workflow_figure.component_names
# Clean up.
closeout(project_dict, workspace_page)
def _test_component_to_complex_workflow(browser):
project_dict, workspace_page = startup(browser)
# Add paraboloid and vehicle_threesim files
file1_path = pkg_resources.resource_filename('openmdao.examples.simple',
'paraboloid.py')
file2_path = pkg_resources.resource_filename('openmdao.examples.enginedesign',
'vehicle_threesim.py')
workspace_page.add_file(file1_path)
workspace_page.add_file(file2_path)
# create an instance of VehicleSim2
sim_name = put_element_on_grid(workspace_page, "VehicleSim2")
# Drag paraboloid element into sim dataflow figure
sim = workspace_page.get_dataflow_figure(sim_name)
paraboloid = workspace_page.find_library_button('Paraboloid')
chain = drag_element_to(browser, paraboloid, sim('content_area').element, False)
release(chain)
paraboloid_name = NameInstanceDialog(workspace_page).create_and_dismiss()
paraboloid_pathname = sim_name + "." + paraboloid_name
# Switch to Workflow pane and show the sim workflow
workspace_page('workflow_tab').click()
workspace_page.show_workflow(sim_name)
# See how many workflow component figures there are before we add to it
eq(len(workspace_page.get_workflow_component_figures()), 16)
############################################################################
# Drop paraboloid component onto the top level workflow for sim
############################################################################
workspace_page('dataflow_tab').click()
workspace_page.expand_object(sim_name)
workspace_page.add_object_to_workflow(paraboloid_pathname, sim_name)
# Confirm that there is one more workflow component figure
workspace_page('workflow_tab').click()
eq(len(workspace_page.get_workflow_component_figures()), 17)
# Confirm that the paraboloid has been added to the sim workflow by trying
# to access it.
obj = workspace_page.find_object_button(sim_name + "." + paraboloid_name)
############################################################################
# Drop paraboloid component onto the sim_acc workflow under sim
############################################################################
workspace_page('dataflow_tab').click()
simsim_name = sim_name + '.sim_acc'
workspace_page.add_object_to_workflow(paraboloid_pathname, simsim_name)
# Confirm that there is one more workflow component figure
workspace_page('workflow_tab').click()
eq(len(workspace_page.get_workflow_component_figures()), 18)
# Confirm that the paraboloid has been added to the sim workflow by trying
# to access it.
obj = workspace_page.find_object_button(sim_name + "." + paraboloid_name)
############################################################################
# Drop paraboloid component onto the vehicle workflow under sim_acc
# This should NOT work since the paraboloid is not in the vehicle assembly
############################################################################
# These error messages are tested in SequentialFlow, though we may want
# to have one test that makes sure that the error dialog makes it through.
#workspace_page('dataflow_tab').click()
#workspace_page.expand_object(simsim_name)
#simsimsim_name = simsim_name + '.vehicle'
#workspace_page.add_object_to_workflow(paraboloid_pathname, simsimsim_name)
#message = NotifierPage.wait(workspace_page)
#eq(message, "x")
# Confirm that there is NOT a new workflow component figure
#workspace_page('workflow_tab').click()
#eq(len(workspace_page.get_workflow_component_figures()), 18)
# Clean up.
closeout(project_dict, workspace_page)
