def addNetwork(network, vlan=None, bonding=None, nics=None, ipaddr=None,
netmask=None, prefix=None, mtu=None, gateway=None,
ipv6addr=None, ipv6gateway=None, force=False,
configurator=None, bondingOptions=None, bridged=True,
_netinfo=None, qosInbound=None, qosOutbound=None, **options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
vlan = _vlanToInternalRepresentation(vlan)
if mtu:
mtu = int(mtu)
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR, "Bad prefix: %s" %
ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(ne.ERR_USED_BRIDGE,
'Network already exists')
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding,
bridged)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic,
bridged)
logging.info("Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, options=%s",
network, vlan, bonding, nics, bondingOptions,
mtu, bridged, options)
if configurator is None:
configurator = Ifcfg()
bootproto = options.pop('bootproto', None)
defaultRoute = network == constants.MANAGEMENT_NETWORK
netEnt = objectivizeNetwork(network if bridged else None, vlan, bonding,
bondingOptions, nics, mtu, ipaddr, netmask,
gateway, bootproto, ipv6addr, ipv6gateway,
_netinfo=_netinfo, configurator=configurator,
defaultRoute=defaultRoute, **options)
netEnt.configure(**options)
configurator.configureLibvirtNetwork(network, netEnt,
qosInbound=qosInbound,
qosOutbound=qosOutbound)
def addNetwork(network, vlan=None, bonding=None, nics=None, ipaddr=None,
netmask=None, prefix=None, mtu=None, gateway=None, force=False,
configurator=None, bondingOptions=None, bridged=True,
_netinfo=None, qosInbound=None, qosOutbound=None, **options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
if mtu:
mtu = int(mtu)
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR, "Bad prefix: %s" %
ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(ne.ERR_USED_BRIDGE,
'Network already exists')
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding,
bridged)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic,
bridged)
logging.info("Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, options=%s",
network, vlan, bonding, nics, bondingOptions,
mtu, bridged, options)
if configurator is None:
configurator = Ifcfg()
bootproto = options.pop('bootproto', None)
netEnt = objectivizeNetwork(network if bridged else None, vlan, bonding,
bondingOptions, nics, mtu, ipaddr, netmask,
gateway, bootproto, _netinfo, configurator,
**options)
# libvirt net addition must be done before creation so that on dhcp ifup
# the dhcp hook will already see the network as belonging to vdsm.
configurator.configureLibvirtNetwork(network, netEnt,
qosInbound=qosInbound,
qosOutbound=qosOutbound)
netEnt.configure(**options)
def testNetmaskConversions(self):
path = os.path.join(os.path.dirname(__file__), "netmaskconversions")
with open(path) as netmaskFile:
for line in netmaskFile:
if line.startswith('#'):
continue
bitmask, address = [value.strip() for value in line.split()]
self.assertEqual(netinfo.prefix2netmask(int(bitmask)), address)
self.assertRaises(ValueError, netinfo.prefix2netmask, -1)
self.assertRaises(ValueError, netinfo.prefix2netmask, 33)
def testNetmaskConversions(self):
path = os.path.join(os.path.dirname(__file__), "netmaskconversions")
with open(path) as netmaskFile:
for line in netmaskFile:
if line.startswith('#'):
continue
bitmask, address = [value.strip() for value in line.split()]
self.assertEqual(netinfo.prefix2netmask(int(bitmask)),
address)
self.assertRaises(ValueError, netinfo.prefix2netmask, -1)
self.assertRaises(ValueError, netinfo.prefix2netmask, 33)
def addNetwork(network, vlan=None, bonding=None, nics=None, ipaddr=None,
netmask=None, prefix=None, mtu=None, gateway=None, dhcpv6=None,
ipv6addr=None, ipv6gateway=None, ipv6autoconf=None, force=False,
configurator=None, bondingOptions=None, bridged=True,
_netinfo=None, qosOutbound=None, defaultRoute=None,
blockingdhcp=False, **options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
if dhcpv6 is not None:
dhcpv6 = utils.tobool(dhcpv6)
if ipv6autoconf is not None:
ipv6autoconf = utils.tobool(ipv6autoconf)
vlan = _vlanToInternalRepresentation(vlan)
if mtu:
mtu = int(mtu)
if network == '':
raise ConfigNetworkError(ne.ERR_BAD_BRIDGE,
'Empty network names are not valid')
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR, "Bad prefix: %s" %
ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(ne.ERR_USED_BRIDGE,
'Network already exists')
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding,
bridged, qosOutbound)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic,
bridged, qosOutbound)
# defaultRoute is set either explicitly by the client, OR if we're adding
# the management network.
# TODO: When oVirt 3.3 is deprecated, change the default to False and
# remove reference to constants.LEGACY_MANAGEMENT_NETWORKS
if defaultRoute is None:
defaultRoute = network in constants.LEGACY_MANAGEMENT_NETWORKS
logging.info("Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, defaultRoute=%s,"
"options=%s", network, vlan, bonding, nics, bondingOptions,
mtu, bridged, defaultRoute, options)
if configurator is None:
configurator = ConfiguratorClass()
bootproto = options.pop('bootproto', None)
netEnt = objectivizeNetwork(
bridge=network if bridged else None, vlan=vlan, bonding=bonding,
bondingOptions=bondingOptions, nics=nics, mtu=mtu, ipaddr=ipaddr,
netmask=netmask, gateway=gateway, bootproto=bootproto, dhcpv6=dhcpv6,
blockingdhcp=blockingdhcp, ipv6addr=ipv6addr, ipv6gateway=ipv6gateway,
ipv6autoconf=ipv6autoconf, defaultRoute=defaultRoute,
_netinfo=_netinfo, configurator=configurator, opts=options)
netEnt.configure(**options)
configurator.configureLibvirtNetwork(network, netEnt)
if qosOutbound is not None:
configurator.configureQoS(qosOutbound, netEnt)
def addNetwork(network, vlan=None, bonding=None, nics=None, ipaddr=None,
netmask=None, prefix=None, mtu=None, gateway=None,
ipv6addr=None, ipv6gateway=None, force=False,
configurator=None, bondingOptions=None, bridged=True,
_netinfo=None, qosInbound=None, qosOutbound=None,
defaultRoute=None, **options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
vlan = _vlanToInternalRepresentation(vlan)
if mtu:
mtu = int(mtu)
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR, "Bad prefix: %s" %
ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(ne.ERR_USED_BRIDGE,
'Network already exists')
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding,
bridged)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic,
bridged)
# defaultRoute is set either explicitly by the client, OR if we're adding
# the management network.
# TODO: When oVirt 3.3 is deprecated, change the default to False and
# remove reference to constants.LEGACY_MANAGEMENT_NETWORKS
if defaultRoute is None:
defaultRoute = network in constants.LEGACY_MANAGEMENT_NETWORKS
logging.info("Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, defaultRoute=%s,"
"options=%s", network, vlan, bonding, nics, bondingOptions,
mtu, bridged, defaultRoute, options)
if configurator is None:
configurator = ConfiguratorClass()
bootproto = options.pop('bootproto', None)
netEnt = objectivizeNetwork(network if bridged else None, vlan, bonding,
bondingOptions, nics, mtu, ipaddr, netmask,
gateway, bootproto, ipv6addr, ipv6gateway,
defaultRoute=defaultRoute, _netinfo=_netinfo,
configurator=configurator, **options)
netEnt.configure(**options)
configurator.configureLibvirtNetwork(network, netEnt,
qosInbound=qosInbound,
qosOutbound=qosOutbound)
def addNetwork(network,
vlan=None,
bonding=None,
nics=None,
ipaddr=None,
netmask=None,
prefix=None,
mtu=None,
gateway=None,
force=False,
configurator=None,
bondingOptions=None,
bridged=True,
_netinfo=None,
qosInbound=None,
qosOutbound=None,
**options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
if mtu:
mtu = int(mtu)
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR,
"Bad prefix: %s" % ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(ne.ERR_USED_BRIDGE,
'Network already exists')
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding,
bridged)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic,
bridged)
logging.info(
"Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, options=%s", network, vlan,
bonding, nics, bondingOptions, mtu, bridged, options)
if configurator is None:
configurator = Ifcfg()
bootproto = options.pop('bootproto', None)
defaultRoute = network == constants.MANAGEMENT_NETWORK
netEnt = objectivizeNetwork(network if bridged else None,
vlan,
bonding,
bondingOptions,
nics,
mtu,
ipaddr,
netmask,
gateway,
bootproto,
_netinfo,
configurator,
defaultRoute=defaultRoute,
**options)
netEnt.configure(**options)
configurator.configureLibvirtNetwork(network,
netEnt,
qosInbound=qosInbound,
qosOutbound=qosOutbound)
def _addNetwork(network, vlan=None, bonding=None, nics=None, ipaddr=None,
netmask=None, prefix=None, mtu=None, gateway=None, dhcpv6=None,
ipv6addr=None, ipv6gateway=None, ipv6autoconf=None,
force=False, configurator=None, bondingOptions=None,
bridged=True, _netinfo=None, hostQos=None,
defaultRoute=None, blockingdhcp=False, **options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
if dhcpv6 is not None:
dhcpv6 = utils.tobool(dhcpv6)
if ipv6autoconf is not None:
ipv6autoconf = utils.tobool(ipv6autoconf)
vlan = _vlanToInternalRepresentation(vlan)
if mtu:
mtu = int(mtu)
if network == '':
raise ConfigNetworkError(ne.ERR_BAD_BRIDGE,
'Empty network names are not valid')
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR, "Bad prefix: %s" %
ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(
ne.ERR_USED_BRIDGE, 'Network already exists (%s)' % (network,))
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic)
# defaultRoute is set either explicitly by the client, OR if we're adding
# the management network.
# TODO: When oVirt 3.3 is deprecated, change the default to False and
# remove reference to constants.LEGACY_MANAGEMENT_NETWORKS
if defaultRoute is None:
defaultRoute = network in constants.LEGACY_MANAGEMENT_NETWORKS
logging.info("Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, defaultRoute=%s,"
"options=%s", network, vlan, bonding, nics, bondingOptions,
mtu, bridged, defaultRoute, options)
if configurator is None:
configurator = ConfiguratorClass()
bootproto = options.pop('bootproto', None)
net_ent = _objectivizeNetwork(
bridge=network if bridged else None, vlan=vlan, bonding=bonding,
bondingOptions=bondingOptions, nics=nics, mtu=mtu, ipaddr=ipaddr,
netmask=netmask, gateway=gateway, bootproto=bootproto, dhcpv6=dhcpv6,
blockingdhcp=blockingdhcp, ipv6addr=ipv6addr, ipv6gateway=ipv6gateway,
ipv6autoconf=ipv6autoconf, defaultRoute=defaultRoute,
_netinfo=_netinfo, configurator=configurator, opts=options)
if bridged and network in _netinfo.bridges:
net_ent_to_configure = net_ent.port
logging.info("Bridge %s already exists.", network)
if mtu:
# The bridge already exists and we attach a new underlying device
# to it. We need to make sure that the bridge MTU configuration is
# updated.
configurator.configApplier.setIfaceMtu(network, mtu)
# We must also update the vms` tap devices (the bridge ports in
# this case) so that their MTU is synced with the bridge
_update_bridge_ports_mtu(net_ent.name, mtu)
else:
net_ent_to_configure = net_ent
if net_ent_to_configure is not None:
logging.info("Configuring device %s", net_ent_to_configure)
net_ent_to_configure.configure(**options)
configurator.configureLibvirtNetwork(network, net_ent)
if hostQos is not None:
configurator.configureQoS(hostQos, net_ent)
def _addNetwork(network,
vlan=None,
bonding=None,
nics=None,
ipaddr=None,
netmask=None,
prefix=None,
mtu=None,
gateway=None,
dhcpv6=None,
ipv6addr=None,
ipv6gateway=None,
ipv6autoconf=None,
force=False,
configurator=None,
bondingOptions=None,
bridged=True,
_netinfo=None,
hostQos=None,
defaultRoute=None,
blockingdhcp=False,
**options):
nics = nics or ()
if _netinfo is None:
_netinfo = netinfo.NetInfo()
bridged = utils.tobool(bridged)
if dhcpv6 is not None:
dhcpv6 = utils.tobool(dhcpv6)
if ipv6autoconf is not None:
ipv6autoconf = utils.tobool(ipv6autoconf)
vlan = _vlanToInternalRepresentation(vlan)
if mtu:
mtu = int(mtu)
if network == '':
raise ConfigNetworkError(ne.ERR_BAD_BRIDGE,
'Empty network names are not valid')
if prefix:
if netmask:
raise ConfigNetworkError(ne.ERR_BAD_PARAMS,
'Both PREFIX and NETMASK supplied')
else:
try:
netmask = netinfo.prefix2netmask(int(prefix))
except ValueError as ve:
raise ConfigNetworkError(ne.ERR_BAD_ADDR,
"Bad prefix: %s" % ve)
if not utils.tobool(force):
logging.debug('validating network...')
if network in _netinfo.networks:
raise ConfigNetworkError(
ne.ERR_USED_BRIDGE,
'Network already exists (%s)' % (network, ))
if bonding:
_validateInterNetworkCompatibility(_netinfo, vlan, bonding)
else:
for nic in nics:
_validateInterNetworkCompatibility(_netinfo, vlan, nic)
# defaultRoute is set either explicitly by the client, OR if we're adding
# the management network.
# REQUIRED_FOR: clusterLevel<=3.3
# remove reference to constants.LEGACY_MANAGEMENT_NETWORKS
if defaultRoute is None:
defaultRoute = network in constants.LEGACY_MANAGEMENT_NETWORKS
logging.info(
"Adding network %s with vlan=%s, bonding=%s, nics=%s,"
" bondingOptions=%s, mtu=%s, bridged=%s, defaultRoute=%s,"
"options=%s", network, vlan, bonding, nics, bondingOptions, mtu,
bridged, defaultRoute, options)
if configurator is None:
configurator = ConfiguratorClass()
bootproto = options.pop('bootproto', None)
net_ent = _objectivizeNetwork(bridge=network if bridged else None,
vlan_id=vlan,
bonding=bonding,
bondingOptions=bondingOptions,
nics=nics,
mtu=mtu,
ipaddr=ipaddr,
netmask=netmask,
gateway=gateway,
bootproto=bootproto,
dhcpv6=dhcpv6,
blockingdhcp=blockingdhcp,
ipv6addr=ipv6addr,
ipv6gateway=ipv6gateway,
ipv6autoconf=ipv6autoconf,
defaultRoute=defaultRoute,
_netinfo=_netinfo,
configurator=configurator,
opts=options)
if bridged and network in _netinfo.bridges:
net_ent_to_configure = net_ent.port
logging.info("Bridge %s already exists.", network)
if mtu:
# The bridge already exists and we attach a new underlying device
# to it. We need to make sure that the bridge MTU configuration is
# updated.
configurator.configApplier.setIfaceMtu(network, mtu)
# We must also update the vms` tap devices (the bridge ports in
# this case) so that their MTU is synced with the bridge
_update_bridge_ports_mtu(net_ent.name, mtu)
else:
net_ent_to_configure = net_ent
if net_ent_to_configure is not None:
logging.info("Configuring device %s", net_ent_to_configure)
net_ent_to_configure.configure(**options)
configurator.configureLibvirtNetwork(network, net_ent)
if hostQos is not None:
configurator.configureQoS(hostQos, net_ent)
