def cleanup_pool(pool_name, pool_type, pool_target):
"""
Delete vols, destroy the created pool and restore the env
"""
if pool_type in ["dir", "netfs"]:
vols = get_vol_list(pool_name)
for vol in vols:
result = virsh.vol_delete(vol, pool_name)
if result.exit_status:
raise error.TestFail("Command virsh vol-delete failed:\n%s"
% result.stderr)
else:
logging.debug("Delete volume %s from pool %s", vol, pool_name)
if not virsh.pool_destroy(pool_name):
raise error.TestFail("Command virsh pool-destroy failed")
else:
logging.debug("Destroy pool %s", pool_name)
if pool_type == "netfs":
shutil.move("/etc/exports.virt", "/etc/exports")
utils.run("service nfs restart")
nfs_path = os.path.join(test.tmpdir, nfs_server_dir)
if os.path.exists(nfs_path):
shutil.rmtree(nfs_path)
if pool_type == "logical":
cmd = "pvs |grep vg_logical|awk '{print $1}'"
pv = utils.system_output(cmd)
utils.run("vgremove -f vg_logical")
utils.run("pvremove %s" % pv)
if pool_type in ["dir", "fs", "netfs"]:
pool_target = os.path.join(test.tmpdir, pool_target)
if os.path.exists(pool_target):
shutil.rmtree(pool_target)
def cleanup_pool(pool_name, pool_type, pool_target):
"""
Delete vols, destroy the created pool and restore the env
"""
if pool_type in ["dir", "netfs"]:
vols = get_vol_list(pool_name)
for vol in vols:
result = virsh.vol_delete(vol, pool_name)
if result.exit_status:
raise error.TestFail(
"Command virsh vol-delete failed:\n%s" % result.stderr)
else:
logging.debug("Delete volume %s from pool %s", vol, pool_name)
if not virsh.pool_destroy(pool_name):
raise error.TestFail("Command virsh pool-destroy failed")
else:
logging.debug("Destroy pool %s", pool_name)
if pool_type == "netfs":
shutil.move("/etc/exports.virt", "/etc/exports")
utils.run("service nfs restart")
nfs_path = os.path.join(test.tmpdir, nfs_server_dir)
if os.path.exists(nfs_path):
shutil.rmtree(nfs_path)
if pool_type == "logical":
cmd = "pvs |grep vg_logical|awk '{print $1}'"
pv = utils.system_output(cmd)
utils.run("vgremove -f vg_logical")
utils.run("pvremove %s" % pv)
if pool_type in ["dir", "fs", "netfs"]:
pool_target = os.path.join(test.tmpdir, pool_target)
if os.path.exists(pool_target):
shutil.rmtree(pool_target)
def delete_volume(expected_vol):
"""
Deletes Volume
"""
result = virsh.vol_delete(expected_vol['name'],
expected_vol['pool_name'],
ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh vol-delete failed:\n%s" %
result.stderr.strip())
else:
logging.debug("Volume: %s successfully created on pool: %s",
expected_vol['name'], expected_vol['pool_name'])
def delete_volume(expected_vol):
"""
Deletes Volume
"""
result = virsh.vol_delete(expected_vol['name'],
expected_vol['pool_name'],
ignore_status = True)
if result.exit_status != 0:
raise error.TestFail("Command virsh vol-delete failed:\n%s" %
result.stderr.strip())
else:
logging.debug("Volume: %s sucessfully created on pool: %s",
expected_vol['name'], expected_vol['pool_name'])
# Start the VM and check status.
vm.start()
if status_error:
raise error.TestFail("VM started unexpectedly.")
if not check_in_vm(vm, device_target):
raise error.TestFail("Check encryption disk in VM failed")
except virt_vm.VMStartError, e:
if status_error:
logging.debug("VM failed to start as expected."
"Error: %s" % str(e))
pass
else:
raise error.TestFail("VM failed to start."
"Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for i in sec_uuid:
virsh.secret_undefine(i, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if virsh.pool_state_dict().has_key(pool_name):
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
def run(test, params, env):
"""
Test rbd disk device.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare disk image.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
additional_xml_file = os.path.join(data_dir.get_tmp_dir(),
"additional_disk.xml")
def config_ceph():
"""
Write the configs to the file.
"""
src_host = disk_src_host.split()
src_port = disk_src_port.split()
conf_str = "mon_host = "
hosts = []
for host, port in zip(src_host, src_port):
hosts.append("%s:%s" % (host, port))
with open(disk_src_config, 'w') as f:
f.write(conf_str + ','.join(hosts) + '\n')
def create_pool():
"""
Define and start a pool.
"""
sp = libvirt_storage.StoragePool()
if create_by_xml:
p_xml = pool_xml.PoolXML(pool_type=pool_type)
p_xml.name = pool_name
s_xml = pool_xml.SourceXML()
s_xml.vg_name = disk_src_pool
source_host = []
for (host_name, host_port) in zip(disk_src_host.split(),
disk_src_port.split()):
source_host.append({'name': host_name, 'port': host_port})
s_xml.hosts = source_host
if auth_type:
s_xml.auth_type = auth_type
if auth_user:
s_xml.auth_username = auth_user
if auth_usage:
s_xml.secret_usage = auth_usage
p_xml.source = s_xml
logging.debug("Pool xml: %s", p_xml)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
else:
auth_opt = ""
if client_name and client_key:
auth_opt = (
"--auth-type %s --auth-username %s --secret-usage '%s'" %
(auth_type, auth_user, auth_usage))
if not sp.define_rbd_pool(
pool_name, mon_host, disk_src_pool, extra=auth_opt):
test.fail("Failed to define storage pool")
if not sp.build_pool(pool_name):
test.fail("Failed to build storage pool")
if not sp.start_pool(pool_name):
test.fail("Failed to start storage pool")
# Check pool operation
ret = virsh.pool_refresh(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_uuid(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
# pool-info
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'no':
test.fail("Failed to check pool information")
# pool-autostart
if not sp.set_pool_autostart(pool_name):
test.fail("Failed to set pool autostart")
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'yes':
test.fail("Failed to check pool information")
# pool-autostart --disable
if not sp.set_pool_autostart(pool_name, "--disable"):
test.fail("Failed to set pool autostart")
# If port is not pre-configured, port value should not be hardcoded in pool information.
if "yes" == params.get("rbd_port", "no"):
if 'port' in virsh.pool_dumpxml(pool_name):
test.fail("port attribute should not be in pool information")
# find-storage-pool-sources-as
if "yes" == params.get("find_storage_pool_sources_as", "no"):
ret = virsh.find_storage_pool_sources_as("rbd", mon_host)
libvirt.check_result(ret, skip_if=unsupported_err)
def create_vol(vol_params):
"""
Create volume.
:param p_name. Pool name.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
pvt = libvirt.PoolVolumeTest(test, params)
if create_by_xml:
pvt.pre_vol_by_xml(pool_name, **vol_params)
else:
pvt.pre_vol(vol_name, None, '2G', None, pool_name)
def check_vol(vol_params):
"""
Check volume information.
"""
pv = libvirt_storage.PoolVolume(pool_name)
# Supported operation
if vol_name not in pv.list_volumes():
test.fail("Volume %s doesn't exist" % vol_name)
ret = virsh.vol_dumpxml(vol_name, pool_name)
libvirt.check_exit_status(ret)
# vol-info
if not pv.volume_info(vol_name):
test.fail("Can't see volume info")
# vol-key
ret = virsh.vol_key(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume key isn't correct")
# vol-path
ret = virsh.vol_path(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume path isn't correct")
# vol-pool
ret = virsh.vol_pool("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if pool_name not in ret.stdout.strip():
test.fail("Volume pool isn't correct")
# vol-name
ret = virsh.vol_name("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if vol_name not in ret.stdout.strip():
test.fail("Volume name isn't correct")
# vol-resize
ret = virsh.vol_resize(vol_name, "2G", pool_name)
libvirt.check_exit_status(ret)
# Not supported operation
# vol-clone
ret = virsh.vol_clone(vol_name, cloned_vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-create-from
volxml = vol_xml.VolXML()
vol_params.update({"name": "%s" % create_from_cloned_volume})
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create_from(pool_name, v_xml.xml, vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-wipe
ret = virsh.vol_wipe(vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-upload
ret = virsh.vol_upload(vol_name,
vm.get_first_disk_devices()['source'],
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-download
ret = virsh.vol_download(vol_name, cloned_vol_name,
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
def check_qemu_cmd():
"""
Check qemu command line options.
"""
cmd = ("ps -ef | grep %s | grep -v grep " % vm_name)
process.run(cmd, shell=True)
if disk_src_name:
cmd += " | grep file=rbd:%s:" % disk_src_name
if auth_user and auth_key:
cmd += ('id=%s:auth_supported=cephx' % auth_user)
if disk_src_config:
cmd += " | grep 'conf=%s'" % disk_src_config
elif mon_host:
hosts = '\:6789\;'.join(mon_host.split())
cmd += " | grep 'mon_host=%s'" % hosts
if driver_iothread:
cmd += " | grep iothread%s" % driver_iothread
# Run the command
process.run(cmd, shell=True)
def check_save_restore():
"""
Test save and restore operation
"""
save_file = os.path.join(data_dir.get_tmp_dir(), "%s.save" % vm_name)
ret = virsh.save(vm_name, save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.restore(save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
if os.path.exists(save_file):
os.remove(save_file)
# Login to check vm status
vm.wait_for_login().close()
def check_snapshot(snap_option, target_dev='vda'):
"""
Test snapshot operation.
"""
snap_name = "s1"
snap_mem = os.path.join(data_dir.get_tmp_dir(), "rbd.mem")
snap_disk = os.path.join(data_dir.get_tmp_dir(), "rbd.disk")
xml_snap_exp = [
"disk name='%s' snapshot='external' type='file'" % target_dev
]
xml_dom_exp = [
"source file='%s'" % snap_disk,
"backingStore type='network' index='1'",
"source protocol='rbd' name='%s'" % disk_src_name
]
if snap_option.count("disk-only"):
options = ("%s --diskspec %s,file=%s --disk-only" %
(snap_name, target_dev, snap_disk))
elif snap_option.count("disk-mem"):
options = ("%s --memspec file=%s --diskspec %s,file="
"%s" % (snap_name, snap_mem, target_dev, snap_disk))
xml_snap_exp.append("memory snapshot='external' file='%s'" %
snap_mem)
else:
options = snap_name
ret = virsh.snapshot_create_as(vm_name, options)
if test_disk_internal_snapshot or test_disk_readonly:
libvirt.check_result(ret, expected_fails=unsupported_err)
else:
libvirt.check_result(ret, skip_if=unsupported_err)
# check xml file.
if not ret.exit_status:
snap_xml = virsh.snapshot_dumpxml(vm_name, snap_name,
debug=True).stdout.strip()
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
# Delete snapshots.
libvirt.clean_up_snapshots(vm_name)
if os.path.exists(snap_mem):
os.remove(snap_mem)
if os.path.exists(snap_disk):
os.remove(snap_disk)
if not all([x in snap_xml for x in xml_snap_exp]):
test.fail("Failed to check snapshot xml")
if not all([x in dom_xml for x in xml_dom_exp]):
test.fail("Failed to check domain xml")
def check_blockcopy(target):
"""
Block copy operation test.
"""
blk_file = os.path.join(data_dir.get_tmp_dir(), "blk.rbd")
if os.path.exists(blk_file):
os.remove(blk_file)
blk_mirror = ("mirror type='file' file='%s' "
"format='raw' job='copy'" % blk_file)
# Do blockcopy
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_result(ret, skip_if=unsupported_err)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count(blk_mirror):
test.fail("Can't see block job in domain xml")
# Abort
ret = virsh.blockjob(vm_name, target, "--abort")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if dom_xml.count(blk_mirror):
test.fail("Failed to abort block job")
if os.path.exists(blk_file):
os.remove(blk_file)
# Sleep for a while after abort operation.
time.sleep(5)
# Do blockcopy again
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_exit_status(ret)
# Wait for complete
def wait_func():
ret = virsh.blockjob(vm_name, target, "--info")
return ret.stderr.count("Block Copy: [100 %]")
timeout = params.get("blockjob_timeout", 600)
utils_misc.wait_for(wait_func, int(timeout))
# Pivot
ret = virsh.blockjob(vm_name, target, "--pivot")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count("source file='%s'" % blk_file):
test.fail("Failed to pivot block job")
# Remove the disk file.
if os.path.exists(blk_file):
os.remove(blk_file)
def check_in_vm(vm_obj, target, old_parts, read_only=False):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm_obj.wait_for_login()
new_parts = utils_disk.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
cmd = ("mount /dev/{0} /mnt && ls /mnt && (sleep 15;"
" touch /mnt/testfile; umount /mnt)".format(added_part))
s, o = session.cmd_status_output(cmd, timeout=60)
session.close()
logging.info("Check disk operation in VM:\n, %s, %s", s, o)
# Readonly fs, check the error messages.
# The command may return True, read-only
# messges can be found from the command output
if read_only:
if "Read-only file system" not in o:
return False
else:
return True
# Other errors
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
def clean_up_volume_snapshots():
"""
Get all snapshots for rbd_vol.img volume,unprotect and then clean up them.
"""
cmd = ("rbd -m {0} {1} info {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name)))
if process.run(cmd, ignore_status=True, shell=True).exit_status:
return
# Get snapshot list.
cmd = ("rbd -m {0} {1} snap"
" list {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name)))
snaps_out = process.run(cmd, ignore_status=True,
shell=True).stdout_text
snap_names = []
if snaps_out:
for line in snaps_out.rsplit("\n"):
if line.startswith("SNAPID") or line == "":
continue
snap_line = line.rsplit()
if len(snap_line) == 4:
snap_names.append(snap_line[1])
logging.debug("Find snapshots: %s", snap_names)
# Unprotect snapshot first,otherwise it will fail to purge volume
for snap_name in snap_names:
cmd = ("rbd -m {0} {1} snap"
" unprotect {2}@{3}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name),
snap_name))
process.run(cmd, ignore_status=True, shell=True)
# Purge volume,and then delete volume.
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, vol_name)))
process.run(cmd, ignore_status=True, shell=True)
def make_snapshot():
"""
make external snapshots.
:return external snapshot path list
"""
logging.info("Making snapshot...")
first_disk_source = vm.get_first_disk_devices()['source']
snapshot_path_list = []
snapshot2_file = os.path.join(data_dir.get_tmp_dir(), "mem.s2")
snapshot3_file = os.path.join(data_dir.get_tmp_dir(), "mem.s3")
snapshot4_file = os.path.join(data_dir.get_tmp_dir(), "mem.s4")
snapshot4_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s4")
snapshot5_file = os.path.join(data_dir.get_tmp_dir(), "mem.s5")
snapshot5_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s5")
# Attempt to take different types of snapshots.
snapshots_param_dict = {
"s1":
"s1 --disk-only --no-metadata",
"s2":
"s2 --memspec %s --no-metadata" % snapshot2_file,
"s3":
"s3 --memspec %s --no-metadata --live" % snapshot3_file,
"s4":
"s4 --memspec %s --diskspec vda,file=%s --no-metadata" %
(snapshot4_file, snapshot4_disk_file),
"s5":
"s5 --memspec %s --diskspec vda,file=%s --live --no-metadata" %
(snapshot5_file, snapshot5_disk_file)
}
for snapshot_name in sorted(snapshots_param_dict.keys()):
ret = virsh.snapshot_create_as(vm_name,
snapshots_param_dict[snapshot_name],
**virsh_dargs)
libvirt.check_exit_status(ret)
if snapshot_name != 's4' and snapshot_name != 's5':
snapshot_path_list.append(
first_disk_source.replace('qcow2', snapshot_name))
return snapshot_path_list
def get_secret_list():
"""
Get secret list.
:return secret list
"""
logging.info("Get secret list ...")
secret_list_result = virsh.secret_list()
secret_list = results_stdout_52lts(
secret_list_result).strip().splitlines()
# First two lines contain table header followed by entries
# for each secret, such as:
#
# UUID Usage
# --------------------------------------------------------------------------------
# b4e8f6d3-100c-4e71-9f91-069f89742273 ceph client.libvirt secret
secret_list = secret_list[2:]
result = []
# If secret list is empty.
if secret_list:
for line in secret_list:
# Split on whitespace, assume 1 column
linesplit = line.split(None, 1)
result.append(linesplit[0])
return result
mon_host = params.get("mon_host")
disk_src_name = params.get("disk_source_name")
disk_src_config = params.get("disk_source_config")
disk_src_host = params.get("disk_source_host")
disk_src_port = params.get("disk_source_port")
disk_src_pool = params.get("disk_source_pool")
disk_format = params.get("disk_format", "raw")
driver_iothread = params.get("driver_iothread")
snap_name = params.get("disk_snap_name")
attach_device = "yes" == params.get("attach_device", "no")
attach_disk = "yes" == params.get("attach_disk", "no")
test_save_restore = "yes" == params.get("test_save_restore", "no")
test_snapshot = "yes" == params.get("test_snapshot", "no")
test_blockcopy = "yes" == params.get("test_blockcopy", "no")
test_qemu_cmd = "yes" == params.get("test_qemu_cmd", "no")
test_vm_parts = "yes" == params.get("test_vm_parts", "no")
additional_guest = "yes" == params.get("additional_guest", "no")
create_snapshot = "yes" == params.get("create_snapshot", "no")
convert_image = "yes" == params.get("convert_image", "no")
create_volume = "yes" == params.get("create_volume", "no")
create_by_xml = "yes" == params.get("create_by_xml", "no")
client_key = params.get("client_key")
client_name = params.get("client_name")
auth_key = params.get("auth_key")
auth_user = params.get("auth_user")
auth_type = params.get("auth_type")
auth_usage = params.get("secret_usage")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
vol_name = params.get("vol_name")
cloned_vol_name = params.get("cloned_volume", "cloned_test_volume")
create_from_cloned_volume = params.get("create_from_cloned_volume",
"create_from_cloned_test_volume")
vol_cap = params.get("vol_cap")
vol_cap_unit = params.get("vol_cap_unit")
start_vm = "yes" == params.get("start_vm", "no")
test_disk_readonly = "yes" == params.get("test_disk_readonly", "no")
test_disk_internal_snapshot = "yes" == params.get(
"test_disk_internal_snapshot", "no")
test_json_pseudo_protocol = "yes" == params.get("json_pseudo_protocol",
"no")
disk_snapshot_with_sanlock = "yes" == params.get(
"disk_internal_with_sanlock", "no")
auth_place_in_source = params.get("auth_place_in_source")
# Prepare a blank params to confirm if delete the configure at the end of the test
ceph_cfg = ""
# Create config file if it doesn't exist
ceph_cfg = ceph.create_config_file(mon_host)
# After libvirt 3.9.0, auth element can be put into source part.
if auth_place_in_source and not libvirt_version.version_compare(3, 9, 0):
test.cancel(
"place auth in source is not supported in current libvirt version")
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
if additional_guest:
guest_name = "%s_%s" % (vm_name, '1')
timeout = params.get("clone_timeout", 360)
utils_libguestfs.virt_clone_cmd(vm_name,
guest_name,
True,
timeout=timeout,
ignore_status=False)
additional_vm = vm.clone(guest_name)
if start_vm:
virsh.start(guest_name)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
key_opt = ""
secret_uuid = None
snapshot_path = None
key_file = os.path.join(data_dir.get_tmp_dir(), "ceph.key")
img_file = os.path.join(data_dir.get_tmp_dir(), "%s_test.img" % vm_name)
front_end_img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_frontend_test.img" % vm_name)
# Construct a unsupported error message list to skip these kind of tests
unsupported_err = []
if driver_iothread:
unsupported_err.append('IOThreads not supported')
if test_snapshot:
unsupported_err.append('live disk snapshot not supported')
if test_disk_readonly:
if not libvirt_version.version_compare(5, 0, 0):
unsupported_err.append('Could not create file: Permission denied')
unsupported_err.append('Permission denied')
else:
unsupported_err.append(
'unsupported configuration: external snapshot ' +
'for readonly disk vdb is not supported')
if test_disk_internal_snapshot:
unsupported_err.append(
'unsupported configuration: internal snapshot for disk ' +
'vdb unsupported for storage type raw')
if test_blockcopy:
unsupported_err.append('block copy is not supported')
if attach_disk:
unsupported_err.append('No such file or directory')
if create_volume:
unsupported_err.append("backing 'volume' disks isn't yet supported")
unsupported_err.append('this function is not supported')
try:
# Clean up dirty secrets in test environments if there have.
dirty_secret_list = get_secret_list()
if dirty_secret_list:
for dirty_secret_uuid in dirty_secret_list:
virsh.secret_undefine(dirty_secret_uuid)
# Prepare test environment.
qemu_config = LibvirtQemuConfig()
if disk_snapshot_with_sanlock:
# Install necessary package:sanlock,libvirt-lock-sanlock
if not utils_package.package_install(["sanlock"]):
test.error("fail to install sanlock")
if not utils_package.package_install(["libvirt-lock-sanlock"]):
test.error("fail to install libvirt-lock-sanlock")
# Set virt_use_sanlock
result = process.run("setsebool -P virt_use_sanlock 1", shell=True)
if result.exit_status:
test.error("Failed to set virt_use_sanlock value")
# Update lock_manager in qemu.conf
qemu_config.lock_manager = 'sanlock'
# Update qemu-sanlock.conf.
san_lock_config = LibvirtSanLockConfig()
san_lock_config.user = '******'
san_lock_config.group = 'sanlock'
san_lock_config.host_id = 1
san_lock_config.auto_disk_leases = True
process.run("mkdir -p /var/lib/libvirt/sanlock", shell=True)
san_lock_config.disk_lease_dir = "/var/lib/libvirt/sanlock"
san_lock_config.require_lease_for_disks = False
# Start sanlock service and restart libvirtd to enforce changes.
result = process.run("systemctl start wdmd", shell=True)
if result.exit_status:
test.error("Failed to start wdmd service")
result = process.run("systemctl start sanlock", shell=True)
if result.exit_status:
test.error("Failed to start sanlock service")
utils_libvirtd.Libvirtd().restart()
# Prepare lockspace and lease file for sanlock in order.
sanlock_cmd_dict = OrderedDict()
sanlock_cmd_dict[
"truncate -s 1M /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to truncate TEST_LS"
sanlock_cmd_dict[
"sanlock direct init -s TEST_LS:0:/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to sanlock direct init TEST_LS:0"
sanlock_cmd_dict[
"chown sanlock:sanlock /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to chown sanlock TEST_LS"
sanlock_cmd_dict[
"restorecon -R -v /var/lib/libvirt/sanlock"] = "Failed to restorecon sanlock"
sanlock_cmd_dict[
"truncate -s 1M /var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to truncate test-disk-resource-lock"
sanlock_cmd_dict[
"sanlock direct init -r TEST_LS:test-disk-resource-lock:" +
"/var/lib/libvirt/sanlock/test-disk-resource-lock:0"] = "Failed to sanlock direct init test-disk-resource-lock"
sanlock_cmd_dict[
"chown sanlock:sanlock " +
"/var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to chown test-disk-resource-loc"
sanlock_cmd_dict[
"sanlock client add_lockspace -s TEST_LS:1:" +
"/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to client add_lockspace -s TEST_LS:0"
for sanlock_cmd in sanlock_cmd_dict.keys():
result = process.run(sanlock_cmd, shell=True)
if result.exit_status:
test.error(sanlock_cmd_dict[sanlock_cmd])
# Create one lease device and add it to VM.
san_lock_vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
lease_device = Lease()
lease_device.lockspace = 'TEST_LS'
lease_device.key = 'test-disk-resource-lock'
lease_device.target = {
'path': '/var/lib/libvirt/sanlock/test-disk-resource-lock'
}
san_lock_vmxml.add_device(lease_device)
san_lock_vmxml.sync()
# Install ceph-common package which include rbd command
if utils_package.package_install(["ceph-common"]):
if client_name and client_key:
with open(key_file, 'w') as f:
f.write("[%s]\n\tkey = %s\n" % (client_name, client_key))
key_opt = "--keyring %s" % key_file
# Create secret xml
sec_xml = secret_xml.SecretXML("no", "no")
sec_xml.usage = auth_type
sec_xml.usage_name = auth_usage
sec_xml.xmltreefile.write()
logging.debug("Secret xml: %s", sec_xml)
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
secret_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
logging.debug("Secret uuid %s", secret_uuid)
if secret_uuid is None:
test.error("Failed to get secret uuid")
# Set secret value
auth_key = params.get("auth_key")
ret = virsh.secret_set_value(secret_uuid, auth_key,
**virsh_dargs)
libvirt.check_exit_status(ret)
# Delete the disk if it exists
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
else:
test.error("Failed to install ceph-common")
if disk_src_config:
config_ceph()
disk_path = ("rbd:%s:mon_host=%s" % (disk_src_name, mon_host))
if auth_user and auth_key:
disk_path += (":id=%s:key=%s" % (auth_user, auth_key))
targetdev = params.get("disk_target", "vdb")
# To be compatible with create_disk_xml function,
# some parameters need to be updated.
params.update({
"type_name": params.get("disk_type", "network"),
"target_bus": params.get("disk_target_bus"),
"target_dev": targetdev,
"secret_uuid": secret_uuid,
"source_protocol": params.get("disk_source_protocol"),
"source_name": disk_src_name,
"source_host_name": disk_src_host,
"source_host_port": disk_src_port
})
# Prepare disk image
if convert_image:
first_disk = vm.get_first_disk_devices()
blk_source = first_disk['source']
# Convert the image to remote storage
disk_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert"
" -O %s %s %s" % (mon_host, key_opt, disk_src_name,
disk_format, blk_source, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
elif create_volume:
vol_params = {
"name": vol_name,
"capacity": int(vol_cap),
"capacity_unit": vol_cap_unit,
"format": disk_format
}
create_pool()
create_vol(vol_params)
check_vol(vol_params)
else:
# Create an local image and make FS on it.
disk_cmd = ("qemu-img create -f %s %s 10M && mkfs.ext4 -F %s" %
(disk_format, img_file, img_file))
process.run(disk_cmd, ignore_status=False, shell=True)
# Convert the image to remote storage
disk_cmd = (
"rbd -m %s %s info %s 2> /dev/null|| qemu-img convert -O"
" %s %s %s" % (mon_host, key_opt, disk_src_name, disk_format,
img_file, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
# Create disk snapshot if needed.
if create_snapshot:
snap_cmd = ("rbd -m %s %s snap create %s@%s" %
(mon_host, key_opt, disk_src_name, snap_name))
process.run(snap_cmd, ignore_status=False, shell=True)
if test_json_pseudo_protocol:
# Create one frontend image with the rbd backing file.
json_str = ('json:{"file.driver":"rbd",'
'"file.filename":"rbd:%s:mon_host=%s"}' %
(disk_src_name, mon_host))
# pass different json string according to the auth config
if auth_user and auth_key:
json_str = ('%s:id=%s:key=%s"}' %
(json_str[:-2], auth_user, auth_key))
disk_cmd = ("qemu-img create -f qcow2 -b '%s' %s" %
(json_str, front_end_img_file))
disk_path = front_end_img_file
process.run(disk_cmd, ignore_status=False, shell=True)
# If hot plug, start VM first, and then wait the OS boot.
# Otherwise stop VM if running.
if start_vm:
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
else:
if not vm.is_dead():
vm.destroy()
if attach_device:
if create_volume:
params.update({"source_pool": pool_name})
params.update({"type_name": "volume"})
# No need auth options for volume
if "auth_user" in params:
params.pop("auth_user")
if "auth_type" in params:
params.pop("auth_type")
if "secret_type" in params:
params.pop("secret_type")
if "secret_uuid" in params:
params.pop("secret_uuid")
if "secret_usage" in params:
params.pop("secret_usage")
# After 3.9.0,the auth element can be place in source part.
if auth_place_in_source:
params.update({"auth_in_source": auth_place_in_source})
xml_file = libvirt.create_disk_xml(params)
if additional_guest:
# Copy xml_file for additional guest VM.
shutil.copyfile(xml_file, additional_xml_file)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name,
xml_file,
flagstr=opts,
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
if additional_guest:
# Make sure the additional VM is running
if additional_vm.is_dead():
additional_vm.start()
additional_vm.wait_for_login().close()
ret = virsh.attach_device(guest_name,
additional_xml_file,
"",
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif attach_disk:
opts = params.get("attach_option", "")
ret = virsh.attach_disk(vm_name, disk_path, targetdev, opts)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_readonly:
params.update({'readonly': "yes"})
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name,
xml_file,
flagstr=opts,
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_internal_snapshot:
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name,
xml_file,
flagstr=opts,
debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif disk_snapshot_with_sanlock:
if vm.is_dead():
vm.start()
snapshot_path = make_snapshot()
if vm.is_alive():
vm.destroy()
elif not create_volume:
libvirt.set_vm_disk(vm, params)
if test_blockcopy:
logging.info("Creating %s...", vm_name)
vmxml_for_test = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
if vm.is_alive():
vm.destroy(gracefully=False)
vm.undefine()
if virsh.create(vmxml_for_test.xml, **virsh_dargs).exit_status:
vmxml_backup.define()
test.fail("Can't create the domain")
elif vm.is_dead():
vm.start()
# Wait for vm is running
vm.wait_for_login(timeout=600).close()
if additional_guest:
if additional_vm.is_dead():
additional_vm.start()
# Check qemu command line
if test_qemu_cmd:
check_qemu_cmd()
# Check partitions in vm
if test_vm_parts:
if not check_in_vm(
vm, targetdev, old_parts, read_only=create_snapshot):
test.fail("Failed to check vm partitions")
if additional_guest:
if not check_in_vm(additional_vm, targetdev, old_parts):
test.fail("Failed to check vm partitions")
# Save and restore operation
if test_save_restore:
check_save_restore()
if test_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option)
if test_blockcopy:
check_blockcopy(targetdev)
if test_disk_readonly:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, 'vdb')
if test_disk_internal_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, targetdev)
# Detach the device.
if attach_device:
xml_file = libvirt.create_disk_xml(params)
ret = virsh.detach_device(vm_name, xml_file)
libvirt.check_exit_status(ret)
if additional_guest:
ret = virsh.detach_device(guest_name, xml_file)
libvirt.check_exit_status(ret)
elif attach_disk:
ret = virsh.detach_disk(vm_name, targetdev)
libvirt.check_exit_status(ret)
# Check disk in vm after detachment.
if attach_device or attach_disk:
session = vm.wait_for_login()
new_parts = utils_disk.get_parts_list(session)
if len(new_parts) != len(old_parts):
test.fail("Disk still exists in vm" " after detachment")
session.close()
except virt_vm.VMStartError as details:
for msg in unsupported_err:
if msg in str(details):
test.cancel(str(details))
else:
test.fail("VM failed to start." "Error: %s" % str(details))
finally:
# Remove ceph configure file if created.
if ceph_cfg:
os.remove(ceph_cfg)
# Delete snapshots.
snapshot_lists = virsh.snapshot_list(vm_name)
if len(snapshot_lists) > 0:
libvirt.clean_up_snapshots(vm_name, snapshot_lists)
for snap in snapshot_lists:
virsh.snapshot_delete(vm_name, snap, "--metadata")
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
if additional_guest:
virsh.remove_domain(guest_name,
"--remove-all-storage",
ignore_stauts=True)
# Remove the snapshot.
if create_snapshot:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
elif create_volume:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt,
os.path.join(disk_src_pool, cloned_vol_name)))
process.run(cmd, ignore_status=True, shell=True)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(
mon_host, key_opt,
os.path.join(disk_src_pool, create_from_cloned_volume)))
process.run(cmd, ignore_status=True, shell=True)
clean_up_volume_snapshots()
else:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
# Delete tmp files.
if os.path.exists(key_file):
os.remove(key_file)
if os.path.exists(img_file):
os.remove(img_file)
# Clean up volume, pool
if vol_name and vol_name in str(virsh.vol_list(pool_name).stdout):
virsh.vol_delete(vol_name, pool_name)
if pool_name and pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
# Clean up secret
secret_list = get_secret_list()
if secret_list:
for secret_uuid in secret_list:
virsh.secret_undefine(secret_uuid)
logging.info("Restoring vm...")
vmxml_backup.sync()
if disk_snapshot_with_sanlock:
# Restore virt_use_sanlock setting.
process.run("setsebool -P virt_use_sanlock 0", shell=True)
# Restore qemu config
qemu_config.restore()
utils_libvirtd.Libvirtd().restart()
# Force shutdown sanlock service.
process.run("sanlock client shutdown -f 1", shell=True)
# Clean up lockspace folder
process.run("rm -rf /var/lib/libvirt/sanlock/*", shell=True)
if snapshot_path is not None:
for snapshot in snapshot_path:
if os.path.exists(snapshot):
os.remove(snapshot)
" on an inactive pool")
# Step (12)
result = virsh.pool_start(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-start failed:\n%s" %
result.stdout)
else:
logging.debug("Pool: %s started successfully", pool_name)
# Step (13)
if not check_vol_list(vol_name, pool_name, pool_target):
raise error.TestFail("Volume %s is not found in the "
"output of virsh vol-list" % vol_name)
# Step (14)
result = virsh.vol_delete(vol_name, pool_name)
if result.exit_status != 0:
raise error.TestFail("Command virsh vol-delete failed:\n%s" %
result.stdout)
else:
logging.debug("Volume: %s deleted successfully", vol_name)
# Step (15)
if check_vol_list(vol_name, pool_name, pool_target):
raise error.TestFail(
"Command virsh vol-list shows deleted volume"
" % for a pool %s" % vol_name, pool_name)
# Step (16)
if not virsh.pool_destroy(pool_name):
raise error.TestFail("Command virsh pool-destroy failed")
def run(test, params, env):
"""
Test disk encryption option.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare pool, volume.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
6.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
def create_pool(p_name, p_type, p_target):
"""
Define and start a pool.
:param p_name. Pool name.
:param p_type. Pool type.
:param p_target. Pool target path.
"""
p_xml = pool_xml.PoolXML(pool_type=p_type)
p_xml.name = p_name
p_xml.target_path = p_target
if not os.path.exists(p_target):
os.mkdir(p_target)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_vol(p_name, target_encrypt_params, vol_params):
"""
Create volume.
:param p_name. Pool name.
:param target_encrypt_params encrypt parameters in dict.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
# Clean up dirty volumes if pool has.
pv = libvirt_storage.PoolVolume(p_name)
vol_name_list = pv.list_volumes()
for vol_name in vol_name_list:
pv.delete_volume(vol_name)
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.encryption = volxml.new_encryption(**target_encrypt_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_secret(vol_path):
"""
Create secret.
:param vol_path. volume path.
:return: secret id if create successfully.
"""
sec_xml = secret_xml.SecretXML("no", "yes")
sec_xml.description = "volume secret"
sec_xml.usage = 'volume'
sec_xml.volume = vol_path
sec_xml.xmltreefile.write()
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
# Get secret uuid.
try:
encryption_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
except IndexError as e:
test.error("Fail to get newly created secret uuid")
logging.debug("Secret uuid %s", encryption_uuid)
# Set secret value.
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(
secret_password_no_encoded.encode(encoding)).decode(encoding)
ret = virsh.secret_set_value(encryption_uuid, secret_string,
**virsh_dargs)
libvirt.check_exit_status(ret)
return encryption_uuid
def get_secret_list():
"""
Get secret list.
:return: secret list
"""
logging.info("Get secret list ...")
secret_list = virsh.secret_list().stdout.strip().splitlines()
# First two lines contain table header followed by entries
# for each secret, such as:
#
# UUID Usage
# --------------------------------------------------------------------------------
# b4e8f6d3-100c-4e71-9f91-069f89742273 ceph client.libvirt secret
secret_list = secret_list[2:]
result = []
# If secret list is not empty.
if secret_list:
for line in secret_list:
# Split on whitespace, assume 1 column
linesplit = line.split(None, 1)
result.append(linesplit[0])
return result
def check_in_vm(vm, target, old_parts):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm.wait_for_login()
rpm_stat = session.cmd_status(
"rpm -q parted || "
"yum install -y parted", 300)
if rpm_stat != 0:
test.fail("Failed to query/install parted, make sure"
" that you have usable repo in guest")
new_parts = utils_disk.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
device_source = os.path.join(os.sep, 'dev', added_part)
libvirt.mk_label(device_source, session=session)
libvirt.mk_part(device_source, size="10M", session=session)
# Run partprobe to make the change take effect.
process.run("partprobe", ignore_status=True, shell=True)
libvirt.mkfs("/dev/%s1" % added_part, "ext3", session=session)
cmd = ("mount /dev/%s1 /mnt && echo '123' > /mnt/testfile"
" && cat /mnt/testfile && umount /mnt" % added_part)
s, o = session.cmd_status_output(cmd)
logging.info("Check disk operation in VM:\n%s", o)
session.close()
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
encryption_in_source = "yes" == params.get("encryption_in_source")
encryption_out_source = "yes" == params.get("encryption_out_source")
if encryption_in_source and not libvirt_version.version_compare(3, 9, 0):
test.cancel("Cannot put <encryption> inside disk <source> in "
"this libvirt version.")
# Pool/Volume options.
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
volume_name = params.get("vol_name")
volume_alloc = params.get("vol_alloc")
volume_cap_unit = params.get("vol_cap_unit")
volume_cap = params.get("vol_cap")
volume_target_path = params.get("target_path")
volume_target_format = params.get("target_format")
volume_target_encypt = params.get("target_encypt", "")
volume_target_label = params.get("target_label")
hotplug = "yes" == params.get("virt_disk_device_hotplug")
status_error = "yes" == params.get("status_error")
secret_type = params.get("secret_type", "passphrase")
secret_password_no_encoded = params.get("secret_password_no_encoded",
"redhat")
virt_disk_qcow2_format = "yes" == params.get("virt_disk_qcow2_format")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = utils_disk.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
sec_encryption_uuid = None
try:
# Prepare the disk.
sec_uuids = []
# Clean up dirty secrets in test environments if there are.
dirty_secret_list = get_secret_list()
if dirty_secret_list:
for dirty_secret_uuid in dirty_secret_list:
virsh.secret_undefine(dirty_secret_uuid)
create_pool(pool_name, pool_type, pool_target)
vol_params = {
"name": volume_name,
"capacity": int(volume_cap),
"allocation": int(volume_alloc),
"format": volume_target_format,
"path": volume_target_path,
"label": volume_target_label,
"capacity_unit": volume_cap_unit
}
vol_encryption_params = {}
vol_encryption_params.update({"format": volume_target_encypt})
# For any disk format other than qcow2, it need create secret firstly.
if not virt_disk_qcow2_format:
# create secret.
sec_encryption_uuid = create_secret(volume_target_path)
sec_uuids.append(sec_encryption_uuid)
vol_encryption_params.update(
{"secret": {
"type": secret_type,
"uuid": sec_encryption_uuid
}})
try:
# If Libvirt version is lower than 2.5.0
# Creating luks encryption volume is not supported,so skip it.
create_vol(pool_name, vol_encryption_params, vol_params)
except AssertionError as info:
err_msgs = ("create: invalid option")
if str(info).count(err_msgs):
test.error("Creating luks encryption volume "
"is not supported on this libvirt version")
else:
test.error("Failed to create volume." "Error: %s" % str(info))
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
if device_type == "file":
dev_attrs = "file"
elif device_type == "dir":
dev_attrs = "dir"
else:
dev_attrs = "dev"
disk_source = disk_xml.new_disk_source(
**{"attrs": {
dev_attrs: volume_target_path
}})
disk_xml.driver = {
"name": "qemu",
"type": volume_target_format,
"cache": "none"
}
disk_xml.target = {"dev": device_target, "bus": device_bus}
v_xml = vol_xml.VolXML.new_from_vol_dumpxml(volume_name, pool_name)
sec_uuids.append(v_xml.encryption.secret["uuid"])
if not status_error:
logging.debug("vol info -- format: %s, type: %s, uuid: %s",
v_xml.encryption.format,
v_xml.encryption.secret["type"],
v_xml.encryption.secret["uuid"])
encryption_dict = {
"encryption": v_xml.encryption.format,
"secret": {
"type": v_xml.encryption.secret["type"],
"uuid": v_xml.encryption.secret["uuid"]
}
}
if encryption_in_source:
disk_source.encryption = disk_xml.new_encryption(
**encryption_dict)
if encryption_out_source:
disk_xml.encryption = disk_xml.new_encryption(
**encryption_dict)
disk_xml.source = disk_source
logging.debug("disk xml is:\n%s" % disk_xml)
if not hotplug:
# Sync VM xml.
vmxml.add_device(disk_xml)
vmxml.sync()
try:
# Start the VM and do disk hotplug if required,
# then check disk status in vm.
# Note that LUKS encrypted virtual disk without <encryption>
# can be normally started or attached since qemu will just treat
# it as RAW, so we don't test LUKS with status_error=TRUE.
vm.start()
vm.wait_for_login()
if status_error:
if hotplug:
logging.debug("attaching disk, expecting error...")
result = virsh.attach_device(vm_name, disk_xml.xml)
libvirt.check_exit_status(result, status_error)
else:
test.fail("VM started unexpectedly.")
else:
if hotplug:
result = virsh.attach_device(vm_name,
disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
result = virsh.detach_device(vm_name,
disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
else:
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
except virt_vm.VMStartError as e:
if status_error:
if hotplug:
test.fail(
"In hotplug scenario, VM should "
"start successfully but not."
"Error: %s", str(e))
else:
logging.debug(
"VM failed to start as expected."
"Error: %s", str(e))
else:
# Libvirt2.5.0 onward,AES-CBC encrypted qcow2 images is no
# longer supported.
err_msgs = ("AES-CBC encrypted qcow2 images is"
" no longer supported in system emulators")
if str(e).count(err_msgs):
test.cancel(err_msgs)
else:
test.fail("VM failed to start." "Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for sec_uuid in set(sec_uuids):
virsh.secret_undefine(sec_uuid, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
" on an inactive pool")
# Step (12)
result = virsh.pool_start(pool_name, ignore_status=True)
if result.exit_status != 0:
raise error.TestFail("Command virsh pool-start failed:\n%s" %
result.stdout)
else:
logging.debug("Pool: %s started successfully", pool_name)
# Step (13)
if not check_vol_list(vol_name, pool_name, pool_target):
raise error.TestFail("Volume %s is not found in the "
"output of virsh vol-list" % vol_name)
# Step (14)
result = virsh.vol_delete(vol_name, pool_name)
if result.exit_status != 0:
raise error.TestFail("Command virsh vol-delete failed:\n%s" %
result.stdout)
else:
logging.debug("Volume: %s deleted successfully", vol_name)
# Step (15)
if check_vol_list(vol_name, pool_name, pool_target):
raise error.TestFail("Command virsh vol-list shows deleted volume"
" % for a pool %s" % vol_name, pool_name)
# Step (16)
if not virsh.pool_destroy(pool_name):
raise error.TestFail("Command virsh pool-destroy failed")
else:
# Start the VM and check status.
vm.start()
if status_error:
raise error.TestFail("VM started unexpectedly.")
if not check_in_vm(vm, device_target, old_parts):
raise error.TestFail("Check encryption disk in VM failed")
except virt_vm.VMStartError, e:
if status_error:
logging.debug("VM failed to start as expected."
"Error: %s" % str(e))
pass
else:
raise error.TestFail("VM failed to start."
"Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for i in sec_uuid:
virsh.secret_undefine(i, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if virsh.pool_state_dict().has_key(pool_name):
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
process.run(cmd, ignore_status=True, shell=True)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(
mon_host, key_opt,
os.path.join(disk_src_pool, create_from_cloned_volume)))
process.run(cmd, ignore_status=True, shell=True)
clean_up_volume_snapshots()
else:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
# Delete tmp files.
if os.path.exists(key_file):
os.remove(key_file)
if os.path.exists(img_file):
os.remove(img_file)
# Clean up volume, pool
if vol_name and vol_name in str(virsh.vol_list(pool_name).stdout):
virsh.vol_delete(vol_name, pool_name)
if pool_name and virsh.pool_state_dict().has_key(pool_name):
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
# Clean up secret
if secret_uuid:
virsh.secret_undefine(secret_uuid)
logging.info("Restoring vm...")
vmxml_backup.sync()
def run(test, params, env):
"""
Test rbd disk device.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare disk image.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
additional_xml_file = os.path.join(data_dir.get_tmp_dir(), "additional_disk.xml")
def config_ceph():
"""
Write the configs to the file.
"""
src_host = disk_src_host.split()
src_port = disk_src_port.split()
conf_str = "mon_host = "
hosts = []
for host, port in zip(src_host, src_port):
hosts.append("%s:%s" % (host, port))
with open(disk_src_config, 'w') as f:
f.write(conf_str + ','.join(hosts) + '\n')
def create_pool():
"""
Define and start a pool.
"""
sp = libvirt_storage.StoragePool()
if create_by_xml:
p_xml = pool_xml.PoolXML(pool_type=pool_type)
p_xml.name = pool_name
s_xml = pool_xml.SourceXML()
s_xml.vg_name = disk_src_pool
source_host = []
for (host_name, host_port) in zip(
disk_src_host.split(), disk_src_port.split()):
source_host.append({'name': host_name,
'port': host_port})
s_xml.hosts = source_host
if auth_type:
s_xml.auth_type = auth_type
if auth_user:
s_xml.auth_username = auth_user
if auth_usage:
s_xml.secret_usage = auth_usage
p_xml.source = s_xml
logging.debug("Pool xml: %s", p_xml)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
else:
auth_opt = ""
if client_name and client_key:
auth_opt = ("--auth-type %s --auth-username %s --secret-usage '%s'"
% (auth_type, auth_user, auth_usage))
if not sp.define_rbd_pool(pool_name, mon_host,
disk_src_pool, extra=auth_opt):
test.fail("Failed to define storage pool")
if not sp.build_pool(pool_name):
test.fail("Failed to build storage pool")
if not sp.start_pool(pool_name):
test.fail("Failed to start storage pool")
# Check pool operation
ret = virsh.pool_refresh(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_uuid(pool_name, **virsh_dargs)
libvirt.check_exit_status(ret)
# pool-info
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'no':
test.fail("Failed to check pool information")
# pool-autostart
if not sp.set_pool_autostart(pool_name):
test.fail("Failed to set pool autostart")
pool_info = sp.pool_info(pool_name)
if pool_info["Autostart"] != 'yes':
test.fail("Failed to check pool information")
# pool-autostart --disable
if not sp.set_pool_autostart(pool_name, "--disable"):
test.fail("Failed to set pool autostart")
# If port is not pre-configured, port value should not be hardcoded in pool information.
if "yes" == params.get("rbd_port", "no"):
if 'port' in virsh.pool_dumpxml(pool_name):
test.fail("port attribute should not be in pool information")
# find-storage-pool-sources-as
if "yes" == params.get("find_storage_pool_sources_as", "no"):
ret = virsh.find_storage_pool_sources_as("rbd", mon_host)
libvirt.check_result(ret, skip_if=unsupported_err)
def create_vol(vol_params):
"""
Create volume.
:param p_name. Pool name.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
pvt = libvirt.PoolVolumeTest(test, params)
if create_by_xml:
pvt.pre_vol_by_xml(pool_name, **vol_params)
else:
pvt.pre_vol(vol_name, None, '2G', None, pool_name)
def check_vol(vol_params):
"""
Check volume information.
"""
pv = libvirt_storage.PoolVolume(pool_name)
# Supported operation
if vol_name not in pv.list_volumes():
test.fail("Volume %s doesn't exist" % vol_name)
ret = virsh.vol_dumpxml(vol_name, pool_name)
libvirt.check_exit_status(ret)
# vol-info
if not pv.volume_info(vol_name):
test.fail("Can't see volume info")
# vol-key
ret = virsh.vol_key(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume key isn't correct")
# vol-path
ret = virsh.vol_path(vol_name, pool_name)
libvirt.check_exit_status(ret)
if "%s/%s" % (disk_src_pool, vol_name) not in ret.stdout.strip():
test.fail("Volume path isn't correct")
# vol-pool
ret = virsh.vol_pool("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if pool_name not in ret.stdout.strip():
test.fail("Volume pool isn't correct")
# vol-name
ret = virsh.vol_name("%s/%s" % (disk_src_pool, vol_name))
libvirt.check_exit_status(ret)
if vol_name not in ret.stdout.strip():
test.fail("Volume name isn't correct")
# vol-resize
ret = virsh.vol_resize(vol_name, "2G", pool_name)
libvirt.check_exit_status(ret)
# Not supported operation
# vol-clone
ret = virsh.vol_clone(vol_name, cloned_vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-create-from
volxml = vol_xml.VolXML()
vol_params.update({"name": "%s" % create_from_cloned_volume})
v_xml = volxml.new_vol(**vol_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create_from(pool_name, v_xml.xml, vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-wipe
ret = virsh.vol_wipe(vol_name, pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-upload
ret = virsh.vol_upload(vol_name, vm.get_first_disk_devices()['source'],
"--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
# vol-download
ret = virsh.vol_download(vol_name, cloned_vol_name, "--pool %s" % pool_name)
libvirt.check_result(ret, skip_if=unsupported_err)
def check_qemu_cmd():
"""
Check qemu command line options.
"""
cmd = ("ps -ef | grep %s | grep -v grep " % vm_name)
process.run(cmd, shell=True)
if disk_src_name:
cmd += " | grep file=rbd:%s:" % disk_src_name
if auth_user and auth_key:
cmd += ('id=%s:auth_supported=cephx' % auth_user)
if disk_src_config:
cmd += " | grep 'conf=%s'" % disk_src_config
elif mon_host:
hosts = '\:6789\;'.join(mon_host.split())
cmd += " | grep 'mon_host=%s'" % hosts
if driver_iothread:
cmd += " | grep iothread%s" % driver_iothread
# Run the command
process.run(cmd, shell=True)
def check_save_restore():
"""
Test save and restore operation
"""
save_file = os.path.join(data_dir.get_tmp_dir(),
"%s.save" % vm_name)
ret = virsh.save(vm_name, save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.restore(save_file, **virsh_dargs)
libvirt.check_exit_status(ret)
if os.path.exists(save_file):
os.remove(save_file)
# Login to check vm status
vm.wait_for_login().close()
def check_snapshot(snap_option, target_dev='vda'):
"""
Test snapshot operation.
"""
snap_name = "s1"
snap_mem = os.path.join(data_dir.get_tmp_dir(), "rbd.mem")
snap_disk = os.path.join(data_dir.get_tmp_dir(), "rbd.disk")
xml_snap_exp = ["disk name='%s' snapshot='external' type='file'" % target_dev]
xml_dom_exp = ["source file='%s'" % snap_disk,
"backingStore type='network' index='1'",
"source protocol='rbd' name='%s'" % disk_src_name]
if snap_option.count("disk-only"):
options = ("%s --diskspec %s,file=%s --disk-only" %
(snap_name, target_dev, snap_disk))
elif snap_option.count("disk-mem"):
options = ("%s --memspec file=%s --diskspec %s,file="
"%s" % (snap_name, snap_mem, target_dev, snap_disk))
xml_snap_exp.append("memory snapshot='external' file='%s'"
% snap_mem)
else:
options = snap_name
ret = virsh.snapshot_create_as(vm_name, options)
if test_disk_internal_snapshot or test_disk_readonly:
libvirt.check_result(ret, expected_fails=unsupported_err)
else:
libvirt.check_result(ret, skip_if=unsupported_err)
# check xml file.
if not ret.exit_status:
snap_xml = virsh.snapshot_dumpxml(vm_name, snap_name,
debug=True).stdout.strip()
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
# Delete snapshots.
libvirt.clean_up_snapshots(vm_name)
if os.path.exists(snap_mem):
os.remove(snap_mem)
if os.path.exists(snap_disk):
os.remove(snap_disk)
if not all([x in snap_xml for x in xml_snap_exp]):
test.fail("Failed to check snapshot xml")
if not all([x in dom_xml for x in xml_dom_exp]):
test.fail("Failed to check domain xml")
def check_blockcopy(target):
"""
Block copy operation test.
"""
blk_file = os.path.join(data_dir.get_tmp_dir(), "blk.rbd")
if os.path.exists(blk_file):
os.remove(blk_file)
blk_mirror = ("mirror type='file' file='%s' "
"format='raw' job='copy'" % blk_file)
# Do blockcopy
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_result(ret, skip_if=unsupported_err)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count(blk_mirror):
test.fail("Can't see block job in domain xml")
# Abort
ret = virsh.blockjob(vm_name, target, "--abort")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if dom_xml.count(blk_mirror):
test.fail("Failed to abort block job")
if os.path.exists(blk_file):
os.remove(blk_file)
# Sleep for a while after abort operation.
time.sleep(5)
# Do blockcopy again
ret = virsh.blockcopy(vm_name, target, blk_file)
libvirt.check_exit_status(ret)
# Wait for complete
def wait_func():
ret = virsh.blockjob(vm_name, target, "--info")
return ret.stderr.count("Block Copy: [100 %]")
timeout = params.get("blockjob_timeout", 600)
utils_misc.wait_for(wait_func, int(timeout))
# Pivot
ret = virsh.blockjob(vm_name, target, "--pivot")
libvirt.check_exit_status(ret)
dom_xml = virsh.dumpxml(vm_name, debug=True).stdout.strip()
if not dom_xml.count("source file='%s'" % blk_file):
test.fail("Failed to pivot block job")
# Remove the disk file.
if os.path.exists(blk_file):
os.remove(blk_file)
def check_in_vm(vm_obj, target, old_parts, read_only=False):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm_obj.wait_for_login()
new_parts = libvirt.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
cmd = ("mount /dev/{0} /mnt && ls /mnt && (sleep 15;"
" touch /mnt/testfile; umount /mnt)"
.format(added_part))
s, o = session.cmd_status_output(cmd, timeout=60)
session.close()
logging.info("Check disk operation in VM:\n, %s, %s", s, o)
# Readonly fs, check the error messages.
# The command may return True, read-only
# messges can be found from the command output
if read_only:
if "Read-only file system" not in o:
return False
else:
return True
# Other errors
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
def clean_up_volume_snapshots():
"""
Get all snapshots for rbd_vol.img volume,unprotect and then clean up them.
"""
cmd = ("rbd -m {0} {1} info {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name)))
if process.run(cmd, ignore_status=True, shell=True).exit_status:
return
# Get snapshot list.
cmd = ("rbd -m {0} {1} snap"
" list {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name)))
snaps_out = process.run(cmd, ignore_status=True, shell=True).stdout_text
snap_names = []
if snaps_out:
for line in snaps_out.rsplit("\n"):
if line.startswith("SNAPID") or line == "":
continue
snap_line = line.rsplit()
if len(snap_line) == 4:
snap_names.append(snap_line[1])
logging.debug("Find snapshots: %s", snap_names)
# Unprotect snapshot first,otherwise it will fail to purge volume
for snap_name in snap_names:
cmd = ("rbd -m {0} {1} snap"
" unprotect {2}@{3}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name), snap_name))
process.run(cmd, ignore_status=True, shell=True)
# Purge volume,and then delete volume.
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, vol_name)))
process.run(cmd, ignore_status=True, shell=True)
def make_snapshot():
"""
make external snapshots.
:return external snapshot path list
"""
logging.info("Making snapshot...")
first_disk_source = vm.get_first_disk_devices()['source']
snapshot_path_list = []
snapshot2_file = os.path.join(data_dir.get_tmp_dir(), "mem.s2")
snapshot3_file = os.path.join(data_dir.get_tmp_dir(), "mem.s3")
snapshot4_file = os.path.join(data_dir.get_tmp_dir(), "mem.s4")
snapshot4_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s4")
snapshot5_file = os.path.join(data_dir.get_tmp_dir(), "mem.s5")
snapshot5_disk_file = os.path.join(data_dir.get_tmp_dir(), "disk.s5")
# Attempt to take different types of snapshots.
snapshots_param_dict = {"s1": "s1 --disk-only --no-metadata",
"s2": "s2 --memspec %s --no-metadata" % snapshot2_file,
"s3": "s3 --memspec %s --no-metadata --live" % snapshot3_file,
"s4": "s4 --memspec %s --diskspec vda,file=%s --no-metadata" % (snapshot4_file, snapshot4_disk_file),
"s5": "s5 --memspec %s --diskspec vda,file=%s --live --no-metadata" % (snapshot5_file, snapshot5_disk_file)}
for snapshot_name in sorted(snapshots_param_dict.keys()):
ret = virsh.snapshot_create_as(vm_name, snapshots_param_dict[snapshot_name],
**virsh_dargs)
libvirt.check_exit_status(ret)
if snapshot_name != 's4' and snapshot_name != 's5':
snapshot_path_list.append(first_disk_source.replace('qcow2', snapshot_name))
return snapshot_path_list
def get_secret_list():
"""
Get secret list.
:return secret list
"""
logging.info("Get secret list ...")
secret_list_result = virsh.secret_list()
secret_list = results_stdout_52lts(secret_list_result).strip().splitlines()
# First two lines contain table header followed by entries
# for each secret, such as:
#
# UUID Usage
# --------------------------------------------------------------------------------
# b4e8f6d3-100c-4e71-9f91-069f89742273 ceph client.libvirt secret
secret_list = secret_list[2:]
result = []
# If secret list is empty.
if secret_list:
for line in secret_list:
# Split on whitespace, assume 1 column
linesplit = line.split(None, 1)
result.append(linesplit[0])
return result
mon_host = params.get("mon_host")
disk_src_name = params.get("disk_source_name")
disk_src_config = params.get("disk_source_config")
disk_src_host = params.get("disk_source_host")
disk_src_port = params.get("disk_source_port")
disk_src_pool = params.get("disk_source_pool")
disk_format = params.get("disk_format", "raw")
driver_iothread = params.get("driver_iothread")
snap_name = params.get("disk_snap_name")
attach_device = "yes" == params.get("attach_device", "no")
attach_disk = "yes" == params.get("attach_disk", "no")
test_save_restore = "yes" == params.get("test_save_restore", "no")
test_snapshot = "yes" == params.get("test_snapshot", "no")
test_blockcopy = "yes" == params.get("test_blockcopy", "no")
test_qemu_cmd = "yes" == params.get("test_qemu_cmd", "no")
test_vm_parts = "yes" == params.get("test_vm_parts", "no")
additional_guest = "yes" == params.get("additional_guest", "no")
create_snapshot = "yes" == params.get("create_snapshot", "no")
convert_image = "yes" == params.get("convert_image", "no")
create_volume = "yes" == params.get("create_volume", "no")
create_by_xml = "yes" == params.get("create_by_xml", "no")
client_key = params.get("client_key")
client_name = params.get("client_name")
auth_key = params.get("auth_key")
auth_user = params.get("auth_user")
auth_type = params.get("auth_type")
auth_usage = params.get("secret_usage")
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
vol_name = params.get("vol_name")
cloned_vol_name = params.get("cloned_volume", "cloned_test_volume")
create_from_cloned_volume = params.get("create_from_cloned_volume", "create_from_cloned_test_volume")
vol_cap = params.get("vol_cap")
vol_cap_unit = params.get("vol_cap_unit")
start_vm = "yes" == params.get("start_vm", "no")
test_disk_readonly = "yes" == params.get("test_disk_readonly", "no")
test_disk_internal_snapshot = "yes" == params.get("test_disk_internal_snapshot", "no")
test_json_pseudo_protocol = "yes" == params.get("json_pseudo_protocol", "no")
disk_snapshot_with_sanlock = "yes" == params.get("disk_internal_with_sanlock", "no")
# Create /etc/ceph/ceph.conf file to suppress false warning error message.
process.run("mkdir -p /etc/ceph", ignore_status=True, shell=True)
cmd = ("echo 'mon_host = {0}' >/etc/ceph/ceph.conf"
.format(mon_host))
process.run(cmd, ignore_status=True, shell=True)
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = libvirt.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
if additional_guest:
guest_name = "%s_%s" % (vm_name, '1')
timeout = params.get("clone_timeout", 360)
utils_libguestfs.virt_clone_cmd(vm_name, guest_name,
True, timeout=timeout,
ignore_status=False)
additional_vm = vm.clone(guest_name)
if start_vm:
virsh.start(guest_name)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
key_opt = ""
secret_uuid = None
snapshot_path = None
key_file = os.path.join(data_dir.get_tmp_dir(), "ceph.key")
img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_test.img" % vm_name)
front_end_img_file = os.path.join(data_dir.get_tmp_dir(),
"%s_frontend_test.img" % vm_name)
# Construct a unsupported error message list to skip these kind of tests
unsupported_err = []
if driver_iothread:
unsupported_err.append('IOThreads not supported')
if test_snapshot:
unsupported_err.append('live disk snapshot not supported')
if test_disk_readonly:
if not libvirt_version.version_compare(5, 0, 0):
unsupported_err.append('Could not create file: Permission denied')
unsupported_err.append('Permission denied')
else:
unsupported_err.append('unsupported configuration: external snapshot ' +
'for readonly disk vdb is not supported')
if test_disk_internal_snapshot:
unsupported_err.append('unsupported configuration: internal snapshot for disk ' +
'vdb unsupported for storage type raw')
if test_blockcopy:
unsupported_err.append('block copy is not supported')
if attach_disk:
unsupported_err.append('No such file or directory')
if create_volume:
unsupported_err.append("backing 'volume' disks isn't yet supported")
unsupported_err.append('this function is not supported')
try:
# Clean up dirty secrets in test environments if there have.
dirty_secret_list = get_secret_list()
if dirty_secret_list:
for dirty_secret_uuid in dirty_secret_list:
virsh.secret_undefine(dirty_secret_uuid)
# Prepare test environment.
qemu_config = LibvirtQemuConfig()
if disk_snapshot_with_sanlock:
# Install necessary package:sanlock,libvirt-lock-sanlock
if not utils_package.package_install(["sanlock"]):
test.error("fail to install sanlock")
if not utils_package.package_install(["libvirt-lock-sanlock"]):
test.error("fail to install libvirt-lock-sanlock")
# Set virt_use_sanlock
result = process.run("setsebool -P virt_use_sanlock 1", shell=True)
if result.exit_status:
test.error("Failed to set virt_use_sanlock value")
# Update lock_manager in qemu.conf
qemu_config.lock_manager = 'sanlock'
# Update qemu-sanlock.conf.
san_lock_config = LibvirtSanLockConfig()
san_lock_config.user = '******'
san_lock_config.group = 'sanlock'
san_lock_config.host_id = 1
san_lock_config.auto_disk_leases = True
process.run("mkdir -p /var/lib/libvirt/sanlock", shell=True)
san_lock_config.disk_lease_dir = "/var/lib/libvirt/sanlock"
san_lock_config.require_lease_for_disks = False
# Start sanlock service and restart libvirtd to enforce changes.
result = process.run("systemctl start wdmd", shell=True)
if result.exit_status:
test.error("Failed to start wdmd service")
result = process.run("systemctl start sanlock", shell=True)
if result.exit_status:
test.error("Failed to start sanlock service")
utils_libvirtd.Libvirtd().restart()
# Prepare lockspace and lease file for sanlock in order.
sanlock_cmd_dict = OrderedDict()
sanlock_cmd_dict["truncate -s 1M /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to truncate TEST_LS"
sanlock_cmd_dict["sanlock direct init -s TEST_LS:0:/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to sanlock direct init TEST_LS:0"
sanlock_cmd_dict["chown sanlock:sanlock /var/lib/libvirt/sanlock/TEST_LS"] = "Failed to chown sanlock TEST_LS"
sanlock_cmd_dict["restorecon -R -v /var/lib/libvirt/sanlock"] = "Failed to restorecon sanlock"
sanlock_cmd_dict["truncate -s 1M /var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to truncate test-disk-resource-lock"
sanlock_cmd_dict["sanlock direct init -r TEST_LS:test-disk-resource-lock:" +
"/var/lib/libvirt/sanlock/test-disk-resource-lock:0"] = "Failed to sanlock direct init test-disk-resource-lock"
sanlock_cmd_dict["chown sanlock:sanlock " +
"/var/lib/libvirt/sanlock/test-disk-resource-lock"] = "Failed to chown test-disk-resource-loc"
sanlock_cmd_dict["sanlock client add_lockspace -s TEST_LS:1:" +
"/var/lib/libvirt/sanlock/TEST_LS:0"] = "Failed to client add_lockspace -s TEST_LS:0"
for sanlock_cmd in sanlock_cmd_dict.keys():
result = process.run(sanlock_cmd, shell=True)
if result.exit_status:
test.error(sanlock_cmd_dict[sanlock_cmd])
# Create one lease device and add it to VM.
san_lock_vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
lease_device = Lease()
lease_device.lockspace = 'TEST_LS'
lease_device.key = 'test-disk-resource-lock'
lease_device.target = {'path': '/var/lib/libvirt/sanlock/test-disk-resource-lock'}
san_lock_vmxml.add_device(lease_device)
san_lock_vmxml.sync()
# Install ceph-common package which include rbd command
if utils_package.package_install(["ceph-common"]):
if client_name and client_key:
with open(key_file, 'w') as f:
f.write("[%s]\n\tkey = %s\n" %
(client_name, client_key))
key_opt = "--keyring %s" % key_file
# Create secret xml
sec_xml = secret_xml.SecretXML("no", "no")
sec_xml.usage = auth_type
sec_xml.usage_name = auth_usage
sec_xml.xmltreefile.write()
logging.debug("Secret xml: %s", sec_xml)
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
secret_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
logging.debug("Secret uuid %s", secret_uuid)
if secret_uuid is None:
test.error("Failed to get secret uuid")
# Set secret value
auth_key = params.get("auth_key")
ret = virsh.secret_set_value(secret_uuid, auth_key,
**virsh_dargs)
libvirt.check_exit_status(ret)
# Delete the disk if it exists
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm "
"{2}".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
else:
test.error("Failed to install ceph-common")
if disk_src_config:
config_ceph()
disk_path = ("rbd:%s:mon_host=%s" %
(disk_src_name, mon_host))
if auth_user and auth_key:
disk_path += (":id=%s:key=%s" %
(auth_user, auth_key))
targetdev = params.get("disk_target", "vdb")
# To be compatible with create_disk_xml function,
# some parameters need to be updated.
params.update({
"type_name": params.get("disk_type", "network"),
"target_bus": params.get("disk_target_bus"),
"target_dev": targetdev,
"secret_uuid": secret_uuid,
"source_protocol": params.get("disk_source_protocol"),
"source_name": disk_src_name,
"source_host_name": disk_src_host,
"source_host_port": disk_src_port})
# Prepare disk image
if convert_image:
first_disk = vm.get_first_disk_devices()
blk_source = first_disk['source']
# Convert the image to remote storage
disk_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert"
" -O %s %s %s" % (mon_host, key_opt,
disk_src_name, disk_format,
blk_source, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
elif create_volume:
vol_params = {"name": vol_name, "capacity": int(vol_cap),
"capacity_unit": vol_cap_unit, "format": disk_format}
create_pool()
create_vol(vol_params)
check_vol(vol_params)
else:
# Create an local image and make FS on it.
disk_cmd = ("qemu-img create -f %s %s 10M && mkfs.ext4 -F %s" %
(disk_format, img_file, img_file))
process.run(disk_cmd, ignore_status=False, shell=True)
# Convert the image to remote storage
disk_cmd = ("rbd -m %s %s info %s 2> /dev/null|| qemu-img convert -O"
" %s %s %s" % (mon_host, key_opt, disk_src_name,
disk_format, img_file, disk_path))
process.run(disk_cmd, ignore_status=False, shell=True)
# Create disk snapshot if needed.
if create_snapshot:
snap_cmd = ("rbd -m %s %s snap create %s@%s" %
(mon_host, key_opt, disk_src_name, snap_name))
process.run(snap_cmd, ignore_status=False, shell=True)
if test_json_pseudo_protocol:
# Create one frontend image with the rbd backing file.
json_str = ('json:{"file.driver":"rbd",'
'"file.filename":"rbd:%s:mon_host=%s"}'
% (disk_src_name, mon_host))
# pass different json string according to the auth config
if auth_user and auth_key:
json_str = ('%s:id=%s:key=%s"}' % (json_str[:-2], auth_user, auth_key))
disk_cmd = ("qemu-img create -f qcow2 -b '%s' %s" %
(json_str, front_end_img_file))
disk_path = front_end_img_file
process.run(disk_cmd, ignore_status=False, shell=True)
# If hot plug, start VM first, and then wait the OS boot.
# Otherwise stop VM if running.
if start_vm:
if vm.is_dead():
vm.start()
vm.wait_for_login().close()
else:
if not vm.is_dead():
vm.destroy()
if attach_device:
if create_volume:
params.update({"source_pool": pool_name})
params.update({"type_name": "volume"})
# No need auth options for volume
if "auth_user" in params:
params.pop("auth_user")
if "auth_type" in params:
params.pop("auth_type")
if "secret_type" in params:
params.pop("secret_type")
if "secret_uuid" in params:
params.pop("secret_uuid")
if "secret_usage" in params:
params.pop("secret_usage")
xml_file = libvirt.create_disk_xml(params)
if additional_guest:
# Copy xml_file for additional guest VM.
shutil.copyfile(xml_file, additional_xml_file)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name, xml_file,
flagstr=opts, debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
if additional_guest:
# Make sure the additional VM is running
if additional_vm.is_dead():
additional_vm.start()
additional_vm.wait_for_login().close()
ret = virsh.attach_device(guest_name, additional_xml_file,
"", debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif attach_disk:
opts = params.get("attach_option", "")
ret = virsh.attach_disk(vm_name, disk_path,
targetdev, opts)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_readonly:
params.update({'readonly': "yes"})
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name, xml_file,
flagstr=opts, debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif test_disk_internal_snapshot:
xml_file = libvirt.create_disk_xml(params)
opts = params.get("attach_option", "")
ret = virsh.attach_device(vm_name, xml_file,
flagstr=opts, debug=True)
libvirt.check_result(ret, skip_if=unsupported_err)
elif disk_snapshot_with_sanlock:
if vm.is_dead():
vm.start()
snapshot_path = make_snapshot()
if vm.is_alive():
vm.destroy()
elif not create_volume:
libvirt.set_vm_disk(vm, params)
if test_blockcopy:
logging.info("Creating %s...", vm_name)
vmxml_for_test = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
if vm.is_alive():
vm.destroy(gracefully=False)
vm.undefine()
if virsh.create(vmxml_for_test.xml, **virsh_dargs).exit_status:
vmxml_backup.define()
test.fail("Can't create the domain")
elif vm.is_dead():
vm.start()
# Wait for vm is running
vm.wait_for_login(timeout=600).close()
if additional_guest:
if additional_vm.is_dead():
additional_vm.start()
# Check qemu command line
if test_qemu_cmd:
check_qemu_cmd()
# Check partitions in vm
if test_vm_parts:
if not check_in_vm(vm, targetdev, old_parts,
read_only=create_snapshot):
test.fail("Failed to check vm partitions")
if additional_guest:
if not check_in_vm(additional_vm, targetdev, old_parts):
test.fail("Failed to check vm partitions")
# Save and restore operation
if test_save_restore:
check_save_restore()
if test_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option)
if test_blockcopy:
check_blockcopy(targetdev)
if test_disk_readonly:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, 'vdb')
if test_disk_internal_snapshot:
snap_option = params.get("snapshot_option", "")
check_snapshot(snap_option, targetdev)
# Detach the device.
if attach_device:
xml_file = libvirt.create_disk_xml(params)
ret = virsh.detach_device(vm_name, xml_file)
libvirt.check_exit_status(ret)
if additional_guest:
ret = virsh.detach_device(guest_name, xml_file)
libvirt.check_exit_status(ret)
elif attach_disk:
ret = virsh.detach_disk(vm_name, targetdev)
libvirt.check_exit_status(ret)
# Check disk in vm after detachment.
if attach_device or attach_disk:
session = vm.wait_for_login()
new_parts = libvirt.get_parts_list(session)
if len(new_parts) != len(old_parts):
test.fail("Disk still exists in vm"
" after detachment")
session.close()
except virt_vm.VMStartError as details:
for msg in unsupported_err:
if msg in str(details):
test.cancel(str(details))
else:
test.fail("VM failed to start."
"Error: %s" % str(details))
finally:
# Remove /etc/ceph/ceph.conf file if exists.
if os.path.exists('/etc/ceph/ceph.conf'):
os.remove('/etc/ceph/ceph.conf')
# Delete snapshots.
snapshot_lists = virsh.snapshot_list(vm_name)
if len(snapshot_lists) > 0:
libvirt.clean_up_snapshots(vm_name, snapshot_lists)
for snap in snapshot_lists:
virsh.snapshot_delete(vm_name, snap, "--metadata")
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
if additional_guest:
virsh.remove_domain(guest_name,
"--remove-all-storage",
ignore_stauts=True)
# Remove the snapshot.
if create_snapshot:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} snap"
" purge {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
elif create_volume:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, cloned_vol_name)))
process.run(cmd, ignore_status=True, shell=True)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, create_from_cloned_volume)))
process.run(cmd, ignore_status=True, shell=True)
clean_up_volume_snapshots()
else:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
# Delete tmp files.
if os.path.exists(key_file):
os.remove(key_file)
if os.path.exists(img_file):
os.remove(img_file)
# Clean up volume, pool
if vol_name and vol_name in str(virsh.vol_list(pool_name).stdout):
virsh.vol_delete(vol_name, pool_name)
if pool_name and pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
# Clean up secret
secret_list = get_secret_list()
if secret_list:
for secret_uuid in secret_list:
virsh.secret_undefine(secret_uuid)
logging.info("Restoring vm...")
vmxml_backup.sync()
if disk_snapshot_with_sanlock:
# Restore virt_use_sanlock setting.
process.run("setsebool -P virt_use_sanlock 0", shell=True)
# Restore qemu config
qemu_config.restore()
utils_libvirtd.Libvirtd().restart()
# Force shutdown sanlock service.
process.run("sanlock client shutdown -f 1", shell=True)
# Clean up lockspace folder
process.run("rm -rf /var/lib/libvirt/sanlock/*", shell=True)
if snapshot_path is not None:
for snapshot in snapshot_path:
if os.path.exists(snapshot):
os.remove(snapshot)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, cloned_vol_name)))
process.run(cmd, ignore_status=True, shell=True)
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, os.path.join(disk_src_pool, create_from_cloned_volume)))
process.run(cmd, ignore_status=True, shell=True)
clean_up_volume_snapshots()
else:
cmd = ("rbd -m {0} {1} info {2} && rbd -m {0} {1} rm {2}"
"".format(mon_host, key_opt, disk_src_name))
process.run(cmd, ignore_status=True, shell=True)
# Delete tmp files.
if os.path.exists(key_file):
os.remove(key_file)
if os.path.exists(img_file):
os.remove(img_file)
# Clean up volume, pool
if vol_name and vol_name in str(virsh.vol_list(pool_name).stdout):
virsh.vol_delete(vol_name, pool_name)
if pool_name and virsh.pool_state_dict().has_key(pool_name):
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)
# Clean up secret
if secret_uuid:
virsh.secret_undefine(secret_uuid)
logging.info("Restoring vm...")
vmxml_backup.sync()
def run(test, params, env):
"""
Test disk encryption option.
1.Prepare test environment,destroy or suspend a VM.
2.Prepare pool, volume.
3.Edit disks xml and start the domain.
4.Perform test operation.
5.Recover test environment.
6.Confirm the test result.
"""
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
virsh_dargs = {'debug': True, 'ignore_status': True}
def create_pool(p_name, p_type, p_target):
"""
Define and start a pool.
:param p_name. Pool name.
:param p_type. Pool type.
:param p_target. Pool target path.
"""
p_xml = pool_xml.PoolXML(pool_type=p_type)
p_xml.name = p_name
p_xml.target_path = p_target
if not os.path.exists(p_target):
os.mkdir(p_target)
p_xml.xmltreefile.write()
ret = virsh.pool_define(p_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_build(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
ret = virsh.pool_start(p_name, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_vol(p_name, target_encrypt_params, vol_params):
"""
Create volume.
:param p_name. Pool name.
:param target_encrypt_params encrypt parameters in dict.
:param vol_params. Volume parameters dict.
:return: True if create successfully.
"""
volxml = vol_xml.VolXML()
v_xml = volxml.new_vol(**vol_params)
v_xml.encryption = volxml.new_encryption(**target_encrypt_params)
v_xml.xmltreefile.write()
ret = virsh.vol_create(p_name, v_xml.xml, **virsh_dargs)
libvirt.check_exit_status(ret)
def create_secret(vol_path):
"""
Create secret.
:param vol_path. volume path.
:return: secret id if create successfully.
"""
sec_xml = secret_xml.SecretXML("no", "yes")
sec_xml.description = "volume secret"
sec_xml.usage = 'volume'
sec_xml.volume = vol_path
sec_xml.xmltreefile.write()
ret = virsh.secret_define(sec_xml.xml)
libvirt.check_exit_status(ret)
# Get secret uuid.
try:
encryption_uuid = re.findall(r".+\S+(\ +\S+)\ +.+\S+",
ret.stdout.strip())[0].lstrip()
except IndexError as e:
test.error("Fail to get newly created secret uuid")
logging.debug("Secret uuid %s", encryption_uuid)
# Set secret value.
encoding = locale.getpreferredencoding()
secret_string = base64.b64encode(secret_password_no_encoded.encode(encoding)).decode(encoding)
ret = virsh.secret_set_value(encryption_uuid, secret_string,
**virsh_dargs)
libvirt.check_exit_status(ret)
return encryption_uuid
def check_in_vm(vm, target, old_parts):
"""
Check mount/read/write disk in VM.
:param vm. VM guest.
:param target. Disk dev in VM.
:return: True if check successfully.
"""
try:
session = vm.wait_for_login()
rpm_stat = session.cmd_status("rpm -q parted || "
"yum install -y parted", 300)
if rpm_stat != 0:
test.fail("Failed to query/install parted, make sure"
" that you have usable repo in guest")
new_parts = libvirt.get_parts_list(session)
added_parts = list(set(new_parts).difference(set(old_parts)))
logging.info("Added parts:%s", added_parts)
if len(added_parts) != 1:
logging.error("The number of new partitions is invalid in VM")
return False
added_part = None
if target.startswith("vd"):
if added_parts[0].startswith("vd"):
added_part = added_parts[0]
elif target.startswith("hd"):
if added_parts[0].startswith("sd"):
added_part = added_parts[0]
if not added_part:
logging.error("Can't see added partition in VM")
return False
device_source = os.path.join(os.sep, 'dev', added_part)
libvirt.mk_label(device_source, session=session)
libvirt.mk_part(device_source, size="10M", session=session)
# Run partprobe to make the change take effect.
process.run("partprobe", ignore_status=True, shell=True)
libvirt.mkfs("/dev/%s1" % added_part, "ext3", session=session)
cmd = ("mount /dev/%s1 /mnt && echo '123' > /mnt/testfile"
" && cat /mnt/testfile && umount /mnt" % added_part)
s, o = session.cmd_status_output(cmd)
logging.info("Check disk operation in VM:\n%s", o)
session.close()
if s != 0:
return False
return True
except (remote.LoginError, virt_vm.VMError, aexpect.ShellError) as e:
logging.error(str(e))
return False
# Disk specific attributes.
device = params.get("virt_disk_device", "disk")
device_target = params.get("virt_disk_device_target", "vdd")
device_type = params.get("virt_disk_device_type", "file")
device_bus = params.get("virt_disk_device_bus", "virtio")
encryption_in_source = "yes" == params.get("encryption_in_source")
encryption_out_source = "yes" == params.get("encryption_out_source")
if encryption_in_source and not libvirt_version.version_compare(3, 9, 0):
test.cancel("Cannot put <encryption> inside disk <source> in "
"this libvirt version.")
# Pool/Volume options.
pool_name = params.get("pool_name")
pool_type = params.get("pool_type")
pool_target = params.get("pool_target")
volume_name = params.get("vol_name")
volume_alloc = params.get("vol_alloc")
volume_cap_unit = params.get("vol_cap_unit")
volume_cap = params.get("vol_cap")
volume_target_path = params.get("target_path")
volume_target_format = params.get("target_format")
volume_target_encypt = params.get("target_encypt", "")
volume_target_label = params.get("target_label")
hotplug = "yes" == params.get("virt_disk_device_hotplug")
status_error = "yes" == params.get("status_error")
secret_type = params.get("secret_type", "passphrase")
secret_password_no_encoded = params.get("secret_password_no_encoded", "redhat")
virt_disk_qcow2_format = "yes" == params.get("virt_disk_qcow2_format")
vm_name = params.get("main_vm")
vm = env.get_vm(vm_name)
# Start vm and get all partions in vm.
if vm.is_dead():
vm.start()
session = vm.wait_for_login()
old_parts = libvirt.get_parts_list(session)
session.close()
vm.destroy(gracefully=False)
# Back up xml file.
vmxml_backup = vm_xml.VMXML.new_from_inactive_dumpxml(vm_name)
sec_encryption_uuid = None
try:
# Prepare the disk.
sec_uuids = []
create_pool(pool_name, pool_type, pool_target)
vol_params = {"name": volume_name, "capacity": int(volume_cap),
"allocation": int(volume_alloc), "format":
volume_target_format, "path": volume_target_path,
"label": volume_target_label,
"capacity_unit": volume_cap_unit}
vol_encryption_params = {}
vol_encryption_params.update({"format": volume_target_encypt})
# For any disk format other than qcow2, it need create secret firstly.
if not virt_disk_qcow2_format:
# create secret.
sec_encryption_uuid = create_secret(volume_target_path)
sec_uuids.append(sec_encryption_uuid)
vol_encryption_params.update({"secret": {"type": secret_type, "uuid": sec_encryption_uuid}})
try:
# If Libvirt version is lower than 2.5.0
# Creating luks encryption volume is not supported,so skip it.
create_vol(pool_name, vol_encryption_params, vol_params)
except AssertionError as info:
err_msgs = ("create: invalid option")
if str(info).count(err_msgs):
test.error("Creating luks encryption volume "
"is not supported on this libvirt version")
else:
test.error("Failed to create volume."
"Error: %s" % str(info))
# Add disk xml.
vmxml = vm_xml.VMXML.new_from_dumpxml(vm_name)
disk_xml = Disk(type_name=device_type)
disk_xml.device = device
if device_type == "file":
dev_attrs = "file"
elif device_type == "dir":
dev_attrs = "dir"
else:
dev_attrs = "dev"
disk_source = disk_xml.new_disk_source(
**{"attrs": {dev_attrs: volume_target_path}})
disk_xml.driver = {"name": "qemu", "type": volume_target_format,
"cache": "none"}
disk_xml.target = {"dev": device_target, "bus": device_bus}
v_xml = vol_xml.VolXML.new_from_vol_dumpxml(volume_name, pool_name)
sec_uuids.append(v_xml.encryption.secret["uuid"])
if not status_error:
logging.debug("vol info -- format: %s, type: %s, uuid: %s",
v_xml.encryption.format,
v_xml.encryption.secret["type"],
v_xml.encryption.secret["uuid"])
encryption_dict = {"encryption": v_xml.encryption.format,
"secret": {"type": v_xml.encryption.secret["type"],
"uuid": v_xml.encryption.secret["uuid"]}}
if encryption_in_source:
disk_source.encryption = disk_xml.new_encryption(
**encryption_dict)
if encryption_out_source:
disk_xml.encryption = disk_xml.new_encryption(
**encryption_dict)
disk_xml.source = disk_source
logging.debug("disk xml is:\n%s" % disk_xml)
if not hotplug:
# Sync VM xml.
vmxml.add_device(disk_xml)
vmxml.sync()
try:
# Start the VM and do disk hotplug if required,
# then check disk status in vm.
# Note that LUKS encrypted virtual disk without <encryption>
# can be normally started or attached since qemu will just treat
# it as RAW, so we don't test LUKS with status_error=TRUE.
vm.start()
vm.wait_for_login()
if status_error:
if hotplug:
logging.debug("attaching disk, expecting error...")
result = virsh.attach_device(vm_name, disk_xml.xml)
libvirt.check_exit_status(result, status_error)
else:
test.fail("VM started unexpectedly.")
else:
if hotplug:
result = virsh.attach_device(vm_name, disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
result = virsh.detach_device(vm_name, disk_xml.xml,
debug=True)
libvirt.check_exit_status(result)
else:
if not check_in_vm(vm, device_target, old_parts):
test.fail("Check encryption disk in VM failed")
except virt_vm.VMStartError as e:
if status_error:
if hotplug:
test.fail("In hotplug scenario, VM should "
"start successfully but not."
"Error: %s", str(e))
else:
logging.debug("VM failed to start as expected."
"Error: %s", str(e))
else:
# Libvirt2.5.0 onward,AES-CBC encrypted qcow2 images is no
# longer supported.
err_msgs = ("AES-CBC encrypted qcow2 images is"
" no longer supported in system emulators")
if str(e).count(err_msgs):
test.cancel(err_msgs)
else:
test.fail("VM failed to start."
"Error: %s" % str(e))
finally:
# Recover VM.
if vm.is_alive():
vm.destroy(gracefully=False)
logging.info("Restoring vm...")
vmxml_backup.sync()
# Clean up pool, vol
for sec_uuid in set(sec_uuids):
virsh.secret_undefine(sec_uuid, **virsh_dargs)
virsh.vol_delete(volume_name, pool_name, **virsh_dargs)
if pool_name in virsh.pool_state_dict():
virsh.pool_destroy(pool_name, **virsh_dargs)
virsh.pool_undefine(pool_name, **virsh_dargs)