Exemplo n.º 1
0
    def add_group(self, itf, sg, n_pkts=2):
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        hs = VppHostState(self, IGMP_FILTER.INCLUDE, itf.sw_if_index, sg)
        hs.add_vpp_config()

        capture = itf.get_capture(n_pkts, timeout=10)

        # reports are transmitted twice due to default rebostness value=2
        self.verify_report(capture[0], [IgmpRecord(sg, "Allow New Sources")]),
        self.verify_report(capture[1], [IgmpRecord(sg, "Allow New Sources")]),

        return hs
Exemplo n.º 2
0
    def remove_group(self, hs):
        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()
        hs.remove_vpp_config()

        capture = self.pg0.get_capture(1, timeout=10)

        self.verify_report(capture[0],
                           [IgmpRecord(hs.sg, "Block Old Sources")])
Exemplo n.º 3
0
    def test_igmp_proxy_device(self):
        """ IGMP proxy device """
        self.pg2.admin_down()
        self.pg2.unconfig_ip4()
        self.pg2.set_table_ip4(0)
        self.pg2.config_ip4()
        self.pg2.admin_up()

        self.vapi.cli('test igmp timers query 10 src 3 leave 1')

        # enable IGMP
        self.vapi.igmp_enable_disable(self.pg0.sw_if_index, 1, IGMP_MODE.HOST)
        self.vapi.igmp_enable_disable(self.pg1.sw_if_index, 1,
                                      IGMP_MODE.ROUTER)
        self.vapi.igmp_enable_disable(self.pg2.sw_if_index, 1,
                                      IGMP_MODE.ROUTER)

        # create IGMP proxy device
        self.vapi.igmp_proxy_device_add_del(0, self.pg0.sw_if_index, 1)
        self.vapi.igmp_proxy_device_add_del_interface(0,
                                                      self.pg1.sw_if_index, 1)
        self.vapi.igmp_proxy_device_add_del_interface(0,
                                                      self.pg2.sw_if_index, 1)

        # send join on pg1. join should be proxied by pg0
        p_j = self._create_igmpv3_pck(self.pg1, "Allow New Sources",
                                      "239.1.1.1", ["10.1.1.1", "10.1.1.2"])
        self.send(self.pg1, p_j)

        capture = self.pg0.get_capture(1, timeout=1)
        self.verify_report(capture[0], [IgmpRecord(IgmpSG("239.1.1.1",
                           ["10.1.1.1", "10.1.1.2"]), "Allow New Sources")])
        self.assertTrue(find_mroute(self, "239.1.1.1", "0.0.0.0", 32))

        # send join on pg2. join should be proxied by pg0.
        # the group should contain only 10.1.1.3 as
        # 10.1.1.1 was already reported
        p_j = self._create_igmpv3_pck(self.pg2, "Allow New Sources",
                                      "239.1.1.1", ["10.1.1.1", "10.1.1.3"])
        self.send(self.pg2, p_j)

        capture = self.pg0.get_capture(1, timeout=1)
        self.verify_report(capture[0], [IgmpRecord(IgmpSG("239.1.1.1",
                           ["10.1.1.3"]), "Allow New Sources")])
        self.assertTrue(find_mroute(self, "239.1.1.1", "0.0.0.0", 32))

        # send leave on pg2. leave for 10.1.1.3 should be proxyed
        # as pg2 was the only interface interested in 10.1.1.3
        p_l = self._create_igmpv3_pck(self.pg2, "Block Old Sources",
                                      "239.1.1.1", ["10.1.1.3"])
        self.send(self.pg2, p_l)

        capture = self.pg0.get_capture(1, timeout=2)
        self.verify_report(capture[0], [IgmpRecord(IgmpSG("239.1.1.1",
                           ["10.1.1.3"]), "Block Old Sources")])
        self.assertTrue(find_mroute(self, "239.1.1.1", "0.0.0.0", 32))

        # disable igmp on pg1 (also removes interface from proxy device)
        # proxy leave for 10.1.1.2. pg2 is still interested in 10.1.1.1
        self.pg_enable_capture(self.pg_interfaces)
        self.vapi.igmp_enable_disable(self.pg1.sw_if_index, 0,
                                      IGMP_MODE.ROUTER)

        capture = self.pg0.get_capture(1, timeout=1)
        self.verify_report(capture[0], [IgmpRecord(IgmpSG("239.1.1.1",
                           ["10.1.1.2"]), "Block Old Sources")])
        self.assertTrue(find_mroute(self, "239.1.1.1", "0.0.0.0", 32))

        # disable IGMP on pg0 and pg1.
        #   disabling IGMP on pg0 (proxy device upstream interface)
        #   removes this proxy device
        self.vapi.igmp_enable_disable(self.pg0.sw_if_index, 0, IGMP_MODE.HOST)
        self.vapi.igmp_enable_disable(self.pg2.sw_if_index, 0,
                                      IGMP_MODE.ROUTER)
        self.assertFalse(find_mroute(self, "239.1.1.1", "0.0.0.0", 32))
Exemplo n.º 4
0
    def test_igmp_host(self):
        """ IGMP Host functions """

        #
        # Enable interface for host functions
        #
        self.vapi.igmp_enable_disable(self.pg0.sw_if_index,
                                      1,
                                      IGMP_MODE.HOST)

        #
        # Add one S,G of state and expect a state-change event report
        # indicating the addition of the S,G
        #
        h1 = self.add_group(self.pg0, IgmpSG("239.1.1.1", ["1.1.1.1"]))

        # search for the corresponding state created in VPP
        dump = self.vapi.igmp_dump(self.pg0.sw_if_index)
        self.assertEqual(len(dump), 1)
        self.assertTrue(find_igmp_state(dump, self.pg0,
                                        "239.1.1.1", "1.1.1.1"))

        #
        # Send a general query (to the all router's address)
        # expect VPP to respond with a membership report.
        # Pad the query with 0 - some devices in the big wild
        # internet are prone to this.
        #
        p_g = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
               IP(src=self.pg0.remote_ip4, dst='224.0.0.1', tos=0xc0) /
               IGMPv3(type="Membership Query", mrcode=100) /
               IGMPv3mq(gaddr="0.0.0.0") /
               Raw(b'\x00' * 10))

        self.send(self.pg0, p_g)

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h1.sg, "Mode Is Include")])

        #
        # Group specific query
        #
        p_gs = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
                IP(src=self.pg0.remote_ip4, dst='239.1.1.1', tos=0xc0,
                   options=[IPOption(copy_flag=1, optclass="control",
                                     option="router_alert")]) /
                IGMPv3(type="Membership Query", mrcode=100) /
                IGMPv3mq(gaddr="239.1.1.1"))

        self.send(self.pg0, p_gs)

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h1.sg, "Mode Is Include")])

        #
        # A group and source specific query, with the source matching
        # the source VPP has
        #
        p_gs1 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
                 IP(src=self.pg0.remote_ip4, dst='239.1.1.1', tos=0xc0,
                    options=[IPOption(copy_flag=1, optclass="control",
                                      option="router_alert")]) /
                 IGMPv3(type="Membership Query", mrcode=100) /
                 IGMPv3mq(gaddr="239.1.1.1", srcaddrs=["1.1.1.1"]))

        self.send(self.pg0, p_gs1)

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h1.sg, "Mode Is Include")])

        #
        # A group and source specific query that reports more sources
        # than the packet actually has.
        #
        p_gs2 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
                 IP(src=self.pg0.remote_ip4, dst='239.1.1.1', tos=0xc0,
                    options=[IPOption(copy_flag=1, optclass="control",
                                      option="router_alert")]) /
                 IGMPv3(type="Membership Query", mrcode=100) /
                 IGMPv3mq(gaddr="239.1.1.1", numsrc=4, srcaddrs=["1.1.1.1"]))

        self.send_and_assert_no_replies(self.pg0, p_gs2, timeout=10)

        #
        # A group and source specific query, with the source NOT matching
        # the source VPP has. There should be no response.
        #
        p_gs2 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
                 IP(src=self.pg0.remote_ip4, dst='239.1.1.1', tos=0xc0,
                    options=[IPOption(copy_flag=1, optclass="control",
                                      option="router_alert")]) /
                 IGMPv3(type="Membership Query", mrcode=100) /
                 IGMPv3mq(gaddr="239.1.1.1", srcaddrs=["1.1.1.2"]))

        self.send_and_assert_no_replies(self.pg0, p_gs2, timeout=10)

        #
        # A group and source specific query, with the multiple sources
        # one of which matches the source VPP has.
        # The report should contain only the source VPP has.
        #
        p_gs3 = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
                 IP(src=self.pg0.remote_ip4, dst='239.1.1.1', tos=0xc0,
                    options=[IPOption(copy_flag=1, optclass="control",
                                      option="router_alert")]) /
                 IGMPv3(type="Membership Query", mrcode=100) /
                 IGMPv3mq(gaddr="239.1.1.1",
                          srcaddrs=["1.1.1.1", "1.1.1.2", "1.1.1.3"]))

        self.send(self.pg0, p_gs3)

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h1.sg, "Mode Is Include")])

        #
        # Two source and group specific queries in quick succession, the
        # first does not have VPPs source the second does. then vice-versa
        #
        self.send(self.pg0, [p_gs2, p_gs1])
        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h1.sg, "Mode Is Include")])

        self.send(self.pg0, [p_gs1, p_gs2])
        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h1.sg, "Mode Is Include")])

        #
        # remove state, expect the report for the removal
        #
        self.remove_group(h1)

        dump = self.vapi.igmp_dump()
        self.assertFalse(dump)

        #
        # A group with multiple sources
        #
        h2 = self.add_group(self.pg0,
                            IgmpSG("239.1.1.1",
                                   ["1.1.1.1", "1.1.1.2", "1.1.1.3"]))

        # search for the corresponding state created in VPP
        dump = self.vapi.igmp_dump(self.pg0.sw_if_index)
        self.assertEqual(len(dump), 3)
        for s in h2.sg.saddrs:
            self.assertTrue(find_igmp_state(dump, self.pg0,
                                            "239.1.1.1", s))
        #
        # Send a general query (to the all router's address)
        # expect VPP to respond with a membership report will all sources
        #
        self.send(self.pg0, p_g)

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(h2.sg, "Mode Is Include")])

        #
        # Group and source specific query; some present some not
        #
        p_gs = (Ether(dst=self.pg0.local_mac, src=self.pg0.remote_mac) /
                IP(src=self.pg0.remote_ip4, dst='239.1.1.1', tos=0xc0,
                   options=[IPOption(copy_flag=1, optclass="control",
                                     option="router_alert")]) /
                IGMPv3(type="Membership Query", mrcode=100) /
                IGMPv3mq(gaddr="239.1.1.1",
                         srcaddrs=["1.1.1.1", "1.1.1.2", "1.1.1.4"]))

        self.send(self.pg0, p_gs)

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(
                               IgmpSG('239.1.1.1', ["1.1.1.1", "1.1.1.2"]),
                               "Mode Is Include")])

        #
        # add loads more groups
        #
        h3 = self.add_group(self.pg0,
                            IgmpSG("239.1.1.2",
                                   ["2.1.1.1", "2.1.1.2", "2.1.1.3"]))
        h4 = self.add_group(self.pg0,
                            IgmpSG("239.1.1.3",
                                   ["3.1.1.1", "3.1.1.2", "3.1.1.3"]))
        h5 = self.add_group(self.pg0,
                            IgmpSG("239.1.1.4",
                                   ["4.1.1.1", "4.1.1.2", "4.1.1.3"]))
        h6 = self.add_group(self.pg0,
                            IgmpSG("239.1.1.5",
                                   ["5.1.1.1", "5.1.1.2", "5.1.1.3"]))
        h7 = self.add_group(self.pg0,
                            IgmpSG("239.1.1.6",
                                   ["6.1.1.1", "6.1.1.2",
                                    "6.1.1.3", "6.1.1.4",
                                    "6.1.1.5", "6.1.1.6",
                                    "6.1.1.7", "6.1.1.8",
                                    "6.1.1.9", "6.1.1.10",
                                    "6.1.1.11", "6.1.1.12",
                                    "6.1.1.13", "6.1.1.14",
                                    "6.1.1.15", "6.1.1.16"]))

        #
        # general query.
        # the order the groups come in is not important, so what is
        # checked for is what VPP is sending today.
        #
        self.send(self.pg0, p_g)

        capture = self.pg0.get_capture(1, timeout=10)

        self.verify_report(capture[0],
                           [IgmpRecord(h3.sg, "Mode Is Include"),
                            IgmpRecord(h2.sg, "Mode Is Include"),
                            IgmpRecord(h6.sg, "Mode Is Include"),
                            IgmpRecord(h4.sg, "Mode Is Include"),
                            IgmpRecord(h5.sg, "Mode Is Include"),
                            IgmpRecord(h7.sg, "Mode Is Include")])

        #
        # modify a group to add and remove some sources
        #
        h7.sg = IgmpSG("239.1.1.6",
                       ["6.1.1.1", "6.1.1.2",
                        "6.1.1.5", "6.1.1.6",
                        "6.1.1.7", "6.1.1.8",
                        "6.1.1.9", "6.1.1.10",
                        "6.1.1.11", "6.1.1.12",
                        "6.1.1.13", "6.1.1.14",
                        "6.1.1.15", "6.1.1.16",
                        "6.1.1.17", "6.1.1.18"])

        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()
        h7.add_vpp_config()

        capture = self.pg0.get_capture(1, timeout=10)
        self.verify_report(capture[0],
                           [IgmpRecord(IgmpSG("239.1.1.6",
                                              ["6.1.1.17", "6.1.1.18"]),
                                       "Allow New Sources"),
                            IgmpRecord(IgmpSG("239.1.1.6",
                                              ["6.1.1.3", "6.1.1.4"]),
                                       "Block Old Sources")])

        #
        # add an additional groups with many sources so that each group
        # consumes the link MTU. We should therefore see multiple state
        # state reports when queried.
        #
        self.vapi.sw_interface_set_mtu(self.pg0.sw_if_index, [560, 0, 0, 0])

        src_list = []
        for i in range(128):
            src_list.append("10.1.1.%d" % i)

        h8 = self.add_group(self.pg0,
                            IgmpSG("238.1.1.1", src_list))
        h9 = self.add_group(self.pg0,
                            IgmpSG("238.1.1.2", src_list))

        self.send(self.pg0, p_g)

        capture = self.pg0.get_capture(4, timeout=10)

        self.verify_report(capture[0],
                           [IgmpRecord(h3.sg, "Mode Is Include"),
                            IgmpRecord(h2.sg, "Mode Is Include"),
                            IgmpRecord(h6.sg, "Mode Is Include"),
                            IgmpRecord(h4.sg, "Mode Is Include"),
                            IgmpRecord(h5.sg, "Mode Is Include")])
        self.verify_report(capture[1],
                           [IgmpRecord(h8.sg, "Mode Is Include")])
        self.verify_report(capture[2],
                           [IgmpRecord(h7.sg, "Mode Is Include")])
        self.verify_report(capture[3],
                           [IgmpRecord(h9.sg, "Mode Is Include")])

        #
        # drop the MTU further (so a 128 sized group won't fit)
        #
        self.vapi.sw_interface_set_mtu(self.pg0.sw_if_index, [512, 0, 0, 0])

        self.pg_enable_capture(self.pg_interfaces)
        self.pg_start()

        h10 = VppHostState(self,
                           IGMP_FILTER.INCLUDE,
                           self.pg0.sw_if_index,
                           IgmpSG("238.1.1.3", src_list))
        h10.add_vpp_config()

        capture = self.pg0.get_capture(2, timeout=10)
        # wait for a little bit
        self.sleep(1)

        #
        # remove state, expect the report for the removal
        # the dump should be empty
        #
        self.vapi.sw_interface_set_mtu(self.pg0.sw_if_index, [600, 0, 0, 0])
        self.remove_group(h8)
        self.remove_group(h9)
        self.remove_group(h2)
        self.remove_group(h3)
        self.remove_group(h4)
        self.remove_group(h5)
        self.remove_group(h6)
        self.remove_group(h7)
        self.remove_group(h10)

        self.logger.info(self.vapi.cli("sh igmp config"))
        self.assertFalse(self.vapi.igmp_dump())

        #
        # TODO
        #  ADD STATE ON MORE INTERFACES
        #

        self.vapi.igmp_enable_disable(self.pg0.sw_if_index,
                                      0,
                                      IGMP_MODE.HOST)