def getregionsrange(polydata):
"""Return range of connected regions."""
# extract surface
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInput(polydata)
surfer.Update()
# clean before connectivity filter
# to avoid artificial regionIds
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInput(surfer.GetOutput())
cleaner.Update()
# extract all connected regions
connect = vtk.vtkPolyDataConnectivityFilter()
connect.SetInput(cleaner.GetOutput())
connect.SetExtractionModeToAllRegions()
connect.ColorRegionsOn()
connect.Update()
# extract surface
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInput(connect.GetOutput())
surfer.Update()
# get range
regions = surfer.GetOutput().GetPointData().GetArray('RegionId')
regionsrange = regions.GetRange()
return regionsrange
def __init__(self, module_manager):
SimpleVTKClassModuleBase.__init__(
self, module_manager,
vtk.vtkDataSetSurfaceFilter(), 'Processing.',
('vtkDataSet',), ('vtkPolyData',),
replaceDoc=True,
inputFunctions=None, outputFunctions=None)
def separate_regions(dataset, regionIdArrayName='RegionId', regionIds=None):
dataset_dsa = wdo(dataset)
if regionIds is None:
regionIds = np.unique(dataset_dsa.PointData[regionIdArrayName])
regions = []
for regionId in regionIds:
threshold = vtk.vtkThreshold()
threshold.SetInputData(dataset)
threshold.ThresholdBetween(regionId, regionId)
threshold.SetInputArrayToProcess(0, 0, 0, 0, regionIdArrayName)
threshold.AllScalarsOff()
threshold.Update()
region = threshold.GetOutput()
if isinstance(dataset, vtk.vtkPolyData):
surfFilter = vtk.vtkDataSetSurfaceFilter()
surfFilter.SetInputData(region)
surfFilter.Update()
region = surfFilter.GetOutput()
regions.append(region)
return regions
def __init__(self, vtk_filename=None, vtk_data=None):
"""
Initiate Viwer
Parameters
----------
vtk_filename : str
Input VTK filename
"""
QDialog.__init__(self)
self.initUI()
ren = vtk.vtkRenderer()
self.vtkWidget.GetRenderWindow().AddRenderer(ren)
iren = self.vtkWidget.GetRenderWindow().GetInteractor()
if vtk_filename is not None:
# VTK file
reader = vtk.vtkUnstructuredGridReader()
reader.SetFileName(vtk_filename)
reader.Update()
vtkdata = reader.GetOutput()
if vtk_data is not None:
vtkdata = vtk_data
# VTK surface
surface = vtk.vtkDataSetSurfaceFilter()
surface.SetInput(vtkdata)
surface.Update()
mapper = vtk.vtkDataSetMapper()
mapper.SetInput(surface.GetOutput())
actor = vtk.vtkActor()
actor.SetMapper(mapper)
actor.GetProperty().EdgeVisibilityOff()
# actor.GetProperty().SetEdgeColor(1,1,1)
# actor.GetProperty().SetLineWidth(0.1)
ren.AddActor(actor)
# annot. cube
axesActor = vtk.vtkAnnotatedCubeActor()
axesActor.SetXPlusFaceText('R')
axesActor.SetXMinusFaceText('L')
axesActor.SetYMinusFaceText('H')
axesActor.SetYPlusFaceText('F')
axesActor.SetZMinusFaceText('A')
axesActor.SetZPlusFaceText('P')
axesActor.GetTextEdgesProperty().SetColor(1, 1, 0)
axesActor.GetCubeProperty().SetColor(0, 0, 1)
self.axes = vtk.vtkOrientationMarkerWidget()
self.axes.SetOrientationMarker(axesActor)
self.axes.SetInteractor(iren)
self.axes.EnabledOn()
self.axes.InteractiveOn()
ren.ResetCamera()
iren.Initialize()
def __init__(self,volume): self.volume=volume #Get the outer surface of the volume self.surface=vtk.vtkDataSetSurfaceFilter() self.surface.SetInputData(volume) self.surface.Update() self.volume=self.surface
def ExtractSurface(self, pass_pointid=True, pass_cellid=True):
"""
Extract surface mesh of the grid
Parameters
----------
pass_pointid : bool, optional
Adds a point scalar "vtkOriginalPointIds" that idenfities which
original points these surface points correspond to
pass_cellid : bool, optional
Adds a cell scalar "vtkOriginalPointIds" that idenfities which
original cells these surface cells correspond to
Returns
-------
extsurf : vtki.PolyData
Surface mesh of the grid
"""
surf_filter = vtk.vtkDataSetSurfaceFilter()
surf_filter.SetInputData(self)
if pass_pointid:
surf_filter.PassThroughCellIdsOn()
if pass_cellid:
surf_filter.PassThroughPointIdsOn()
surf_filter.Update()
return vtki.PolyData(surf_filter.GetOutput())
def vtkReadVTKfile(self, filename='not defined'):
""" Lecture d'un fichier vtk"""
# Read the source file.
print "----------------------------------------------------"
print "Read geometric surface"
print "----------------------------------------------------"
reader = vtk.vtkUnstructuredGridReader()
reader.SetFileName(os.path.join(self.read_path, filename))
reader.Update() # Needed because of GetScalarRange
surface_filter = vtk.vtkDataSetSurfaceFilter()
surface_filter.SetInputConnection(reader.GetOutputPort())
self.meshNormals = vtk.vtkPolyDataNormals()
self.meshNormals.SetInputConnection(surface_filter.GetOutputPort())
self.meshNormals.Update()
#~ self.normales = VN.vtk_to_numpy(self.meshNormals.GetOutput().GetPointData().GetNormals())
self.meshNode = VN.vtk_to_numpy(
surface_filter.GetOutput().GetPoints().GetData())
self.meshTable = VN.vtk_to_numpy(
surface_filter.GetOutput().GetPolys().GetData())
self.meshTable = self.meshTable.reshape(self.meshTable.shape[0] / 4,
4)[:, 1:]
self.nbDof = self.meshNode.shape[0]
self.nbElem = self.meshTable.shape[0]
def extractconnectedregion(polydata, regionid):
"""Run connectivity filter to assign regionsids and return region with
given regionid."""
# extract surface
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInput(polydata)
surfer.Update()
# clean before connectivity filter
# to avoid artificial regionIds
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInput(surfer.GetOutput())
cleaner.Update()
# extract all regions
connect = vtk.vtkPolyDataConnectivityFilter()
connect.SetInput(cleaner.GetOutput())
connect.SetExtractionModeToAllRegions()
connect.ColorRegionsOn()
connect.Update()
# threshold especified region
surface = pointthreshold(connect.GetOutput(), 'RegionId', float(regionid),
float(regionid))
return surface
def get_boundaries(self):
'''
Extracts the boundaries of the model to a polydata object, if export_STL is selected then ask for where to save it.
'''
#can't be activated unless load_model has run
extract_surface = vtk.vtkDataSetSurfaceFilter()
extract_surface.SetInputDataObject(self.vtu_output)
extract_surface.Update()
self.model_boundary = vtk.vtkPolyData()
self.model_boundary = extract_surface.GetOutput()
msg = 'Extracted boundaries.'
if self.ui.export_STL_button.isChecked():
#get file name
fileo, _ = get_save_file('*.stl')
if fileo is None:
return
writer = vtk.vtkSTLWriter()
writer.SetFileName(fileo)
writer.SetInputData(self.model_boundary)
msg = 'Extracted boundaries and wrote STL file.' #overwrite msg if stl was written
writer.Write()
self.display_info(msg)
self.ui.vtkWidget.update()
def get_number_of_points_and_boundary_faces(pod_mode_dir,calibrate_coefficients): filename = pod_mode_dir+"/spatial_meanfield.vtk" reader = vtk.vtkUnstructuredGridReader() reader.ReadAllScalarsOn() reader.ReadAllVectorsOn() reader.ReadAllTensorsOn() reader.SetFileName(filename) reader.Update() num_points = reader.GetOutput().GetNumberOfPoints() if( (calibrate_coefficients=="none") or (calibrate_coefficients=="constant") ): geom_filter = vtk.vtkDataSetSurfaceFilter() geom_filter.SetInput(reader.GetOutput()) geom_filter.Update() boundary_faces = vtk.vtkPolyData() boundary_faces = geom_filter.GetOutput() point_to_cell_data = vtk.vtkPointDataToCellData() point_to_cell_data.SetInput(geom_filter.GetOutput()) point_to_cell_data.Update() num_boundary_faces = point_to_cell_data.GetOutput().GetNumberOfCells() else: num_boundary_faces = 1 return num_points, num_boundary_faces
def isolateCap(model, cap, caps_location):
cap_vtp = intializeVTP(caps_location + '/' + cap + '.vtp')
cellIds = vtk.vtkIdTypeArray()
cap_cell_set = set()
for i_cell in range(0, cap_vtp.GetNumberOfCells()):
cap_cell_set.add(
cap_vtp.GetCellData().GetArray('GlobalElementID').GetValue(i_cell))
for i_cell in range(0, model.GetNumberOfCells()):
if (model.GetCellData().GetArray('GlobalElementID').GetValue(i_cell)
in cap_cell_set):
cellIds.InsertNextValue(i_cell)
#print(cellIds.GetNumberOfValues())
#Creates the selection object to extract the subset of cells from the mesh
region = vtk.vtkExtractSelection()
region.SetInputData(0, model)
tempCells = vtk.vtkSelectionNode()
tempCells.SetFieldType(vtk.vtkSelectionNode.CELL)
tempCells.SetContentType(vtk.vtkSelectionNode.INDICES)
tempCells.SetSelectionList(cellIds)
tempSelection = vtk.vtkSelection()
tempSelection.AddNode(tempCells)
region.SetInputData(1, tempSelection)
region.Update()
#Outputs the mesh as an polyData object
dssf = vtk.vtkDataSetSurfaceFilter()
dssf.SetInputConnection(region.GetOutputPort())
dssf.Update()
return dssf.GetOutput(), cellIds
def extract_surface(self):
print('extracting surface')
# Get surface of the mesh
surface_filter = vtk.vtkDataSetSurfaceFilter()
surface_filter.SetInputData(self.mesh.GetOutput())
surface_filter.Update()
self.mesh = surface_filter
def putMaskOnVTKGrid(data,grid,actorColor=None,deep=True):
#Ok now looking
msk = data.mask
imsk = VN.numpy_to_vtk(msk.astype(numpy.int).flat,deep=deep)
mapper = None
if msk is not numpy.ma.nomask:
msk = VN.numpy_to_vtk(numpy.logical_not(msk).astype(numpy.uint8).flat,deep=deep)
if actorColor is not None:
grid2 = vtk.vtkStructuredGrid()
grid2.CopyStructure(grid)
geoFilter = vtk.vtkDataSetSurfaceFilter()
if grid.IsA("vtkStructuredGrid"):
grid2.GetPointData().SetScalars(imsk)
#grid2.SetCellVisibilityArray(imsk)
p2c = vtk.vtkPointDataToCellData()
p2c.SetInputData(grid2)
geoFilter.SetInputConnection(p2c.GetOutputPort())
else:
grid2.GetCellData().SetScalars(imsk)
geoFilter.SetInputData(grid)
geoFilter.Update()
mapper = vtk.vtkPolyDataMapper()
mapper.SetInputData(geoFilter.GetOutput())
lut = vtk.vtkLookupTable()
lut.SetNumberOfTableValues(1)
r,g,b = actorColor
lut.SetNumberOfTableValues(2)
lut.SetTableValue(0,r/100.,g/100.,b/100.)
lut.SetTableValue(1,r/100.,g/100.,b/100.)
mapper.SetLookupTable(lut)
mapper.SetScalarRange(1,1)
if grid.IsA("vtkStructuredGrid"):
grid.SetPointVisibilityArray(msk)
#grid.SetCellVisibilityArray(msk)
return mapper
def ReadOBJFile(self, filename):
'''
@param filename: str
@rtype: None
'''
reader = vtk.vtkOBJReader()
reader.SetFileName(filename)
try:
reader.Update()
cleanFilter = vtk.vtkCleanPolyData()
cleanFilter.SetInput(reader.GetOutput())
cleanFilter.ConvertLinesToPointsOn()
cleanFilter.ConvertPolysToLinesOn()
cleanFilter.ConvertStripsToPolysOn()
cleanFilter.PointMergingOn()
cleanFilter.Update()
surfaceFilter = vtk.vtkDataSetSurfaceFilter()
surfaceFilter.SetInput(cleanFilter.GetOutput())
surfaceFilter.Update()
self.setDataSet(surfaceFilter.GetOutput())
del cleanFilter
del surfaceFilter
except Exception, e:
# del reader
print e
raise IOError, "Could not read the OBJ file! "
def get_surface_faces(surface):
'''Get the faces from the surface mesh using the ModelFaceID data array.
'''
face_ids = surface.GetCellData().GetArray('ModelFaceID')
face_ids_range = 2 * [0]
face_ids.GetRange(face_ids_range, 0)
min_id = int(face_ids_range[0])
max_id = int(face_ids_range[1])
## Extract face geometry.
#
faces = []
for i in range(min_id, max_id + 1):
threshold = vtk.vtkThreshold()
threshold.SetInputData(surface)
threshold.SetInputArrayToProcess(0, 0, 0, 1, 'ModelFaceID')
threshold.ThresholdBetween(i, i)
threshold.Update()
surfacer = vtk.vtkDataSetSurfaceFilter()
surfacer.SetInputData(threshold.GetOutput())
surfacer.Update()
faces.append(surfacer.GetOutput())
return faces
def doNonLinear(self, ghosts, ncells):
pts = vtk.vtkPoints()
pts.SetNumberOfPoints(10)
pts.InsertPoint(0, (0, 0, 0))
pts.InsertPoint(1, (1, 0, 0))
pts.InsertPoint(2, (0.5, 1, 0))
pts.InsertPoint(3, (0.5, 0.5, 1))
pts.InsertPoint(4, (0.5, 0, 0))
pts.InsertPoint(5, (1.25, 0.5, 0))
pts.InsertPoint(6, (0.25, 0.5, 0))
pts.InsertPoint(7, (0.25, 0.25, 0.5))
pts.InsertPoint(8, (0.75, 0.25, 0.5))
pts.InsertPoint(9, (0.5, 0.75, 0.5))
te = vtk.vtkQuadraticTetra()
ptIds = te.GetPointIds()
for i in range(10):
ptIds.SetId(i, i)
grid = vtk.vtkUnstructuredGrid()
grid.Allocate(1, 1)
grid.InsertNextCell(te.GetCellType(), te.GetPointIds())
grid.SetPoints(pts)
grid.GetPointData().AddArray(ghosts)
ugg = vtk.vtkUnstructuredGridGeometryFilter()
ugg.SetInputData(grid)
dss = vtk.vtkDataSetSurfaceFilter()
dss.SetNonlinearSubdivisionLevel(2)
dss.SetInputConnection(ugg.GetOutputPort())
dss.Update()
self.assertEqual(dss.GetOutput().GetNumberOfCells(), ncells)
def extract_fiber(bundle, ids):
print "ids selected: ", ids.GetNumberOfTuples()
sys.stdout.flush()
selectionNode = vtk.vtkSelectionNode()
selectionNode.SetFieldType(vtk.vtkSelectionNode.CELL)
selectionNode.SetContentType(vtk.vtkSelectionNode.INDICES)
selection = vtk.vtkSelection()
extractSelection = vtk.vtkExtractSelection()
vtu2vtkFilter = vtk.vtkDataSetSurfaceFilter()
selectionNode.SetSelectionList(ids)
selection.AddNode(selectionNode)
if vtk.VTK_MAJOR_VERSION > 5:
extractSelection.SetInputData(0, bundle)
del bundle
extractSelection.SetInputData(1, selection)
del selection
extractSelection.Update()
vtu2vtkFilter.SetInputData(extractSelection.GetOutput())
del extractSelection
else:
extractSelection.SetInput(0, bundle)
del bundle
extractSelection.SetInput(1, selection)
del selection
extractSelection.Update()
vtu2vtkFilter.SetInput(extractSelection.GetOutput())
del extractSelection
vtu2vtkFilter.Update()
extract = vtk.vtkPolyData()
extract = vtu2vtkFilter.GetOutput()
del vtu2vtkFilter
del selectionNode
return extract
def doNonLinear(self, ghosts, ncells):
pts = vtk.vtkPoints()
pts.SetNumberOfPoints(10)
pts.InsertPoint(0, (0, 0, 0))
pts.InsertPoint(1, (1, 0, 0))
pts.InsertPoint(2, (0.5, 1, 0))
pts.InsertPoint(3, (0.5, 0.5, 1))
pts.InsertPoint(4, (0.5, 0, 0))
pts.InsertPoint(5, (0.25, 0.5, 0))
pts.InsertPoint(6, (0.75, 0.5, 0))
pts.InsertPoint(7, (0.25, 0.25, 0.5))
pts.InsertPoint(8, (0.75, 0.25, 0.5))
pts.InsertPoint(9, (0.5, 0.75, 0.5))
te = vtk.vtkQuadraticTetra()
ptIds = te.GetPointIds()
for i in range(10):
ptIds.SetId(i, i)
grid = vtk.vtkUnstructuredGrid()
grid.Allocate(1, 1)
grid.InsertNextCell(te.GetCellType(), te.GetPointIds())
grid.SetPoints(pts)
grid.GetPointData().AddArray(ghosts)
ugg = vtk.vtkUnstructuredGridGeometryFilter()
ugg.SetInputData(grid)
dss = vtk.vtkDataSetSurfaceFilter()
dss.SetNonlinearSubdivisionLevel(2)
dss.SetInputConnection(ugg.GetOutputPort())
dss.Update()
self.assertEqual(dss.GetOutput().GetNumberOfCells(), ncells)
def save_lesion(output_file, input_file, field, limits):
reader = v.vtkXMLUnstructuredGridReader()
reader.SetFileName(input_file)
reader.Update()
threshold = v.vtkThreshold()
threshold.SetInput(reader.GetOutput())
if limits[0] is None:
threshold.ThresholdByLower(limits[1])
elif limits[1] is None:
threshold.ThresholdByUpper(limits[0])
else:
threshold.ThresholdBetween(*limits)
threshold.SetInputArrayToProcess(0, 0, 0, v.vtkDataObject.FIELD_ASSOCIATION_CELLS, field)
threshold.Update()
extract_surface = v.vtkDataSetSurfaceFilter()
extract_surface.SetInput(threshold.GetOutput())
extract_surface.Update()
writer = v.vtkXMLPolyDataWriter()
writer.SetFileName(output_file)
writer.SetInput(extract_surface.GetOutput())
writer.Write()
def ConvertDataSetToSurface(algorithmOutputPort): dataSetSurfaceFilter = vtk.vtkDataSetSurfaceFilter() dataSetSurfaceFilter.SetInputConnection(algorithmOutputPort) dataSetSurfaceFilter.Update() polyData = vtk.vtkPolyData() polyData.ShallowCopy(dataSetSurfaceFilter.GetOutput()) return polyData
def Test3(datadir):
reader = vtk.vtkDataSetReader()
reader.SetFileName(datadir + "/Data/blow.vtk")
reader.UpdateInformation();
reader.ReadAllScalarsOn()
reader.ReadAllVectorsOn()
dssf = vtk.vtkDataSetSurfaceFilter()
dssf.SetInputConnection(reader.GetOutputPort())
stripper = vtk.vtkStripper()
stripper.SetInputConnection(dssf.GetOutputPort())
f = vtk.vtkIntegrateAttributes()
f.SetInputConnection(stripper.GetOutputPort())
f.Update()
result = f.GetOutputDataObject(0)
val = result.GetPointData().GetArray("displacement1").GetValue(0)
assert (val > 463.64 and val < 463.642)
val = result.GetPointData().GetArray("thickness3").GetValue(0)
assert (val > 874.61 and val < 874.618)
val = result.GetCellData().GetArray("Area").GetValue(0)
assert (val > 1145.405 and val < 1145.415)
def threshold(polydata,
arrayname,
valuerange=[0, 1],
iscelldata=True,
allscalars=True):
"""Extract those cells from polydata whose pointdata/celldata values are
within a specified range.
For pointdata, cells are included if scalar values of all cell points are
within the range (allscalars=True) or if the scalar value of at least one of
the cell points is within the range (allscalar=False).
"""
thresholdfilter = vtk.vtkThreshold()
thresholdfilter.SetInput(polydata)
thresholdfilter.ThresholdBetween(valuerange[0], valuerange[1])
if iscelldata:
thresholdfilter.SetInputArrayToProcess(
0, 0, 0, vtk.vtkDataObject.FIELD_ASSOCIATION_CELLS, arrayname)
else:
thresholdfilter.SetInputArrayToProcess(
0, 0, 0, vtk.vtkDataObject.FIELD_ASSOCIATION_POINTS, arrayname)
if allscalars:
thresholdfilter.AllScalarsOn()
else:
thresholdfilter.AllScalarsOff()
thresholdfilter.Update()
surfacefilter = vtk.vtkDataSetSurfaceFilter()
surfacefilter.SetInput(thresholdfilter.GetOutput())
surfacefilter.Update()
return surfacefilter.GetOutput()
def __init__(self, renderer, data, type, index):
PeacockActor.__init__(self, renderer)
self.data = data
self.type = type
self.index = index
self.solid_visible = False
self.edges_visible = False
self.mesh = data.GetBlock(type).GetBlock(index)
self.geom = vtk.vtkDataSetSurfaceFilter()
if vtk.VTK_MAJOR_VERSION <= 5:
self.geom.SetInput(self.mesh)
else:
self.geom.SetInputData(self.mesh)
self.geom.Update()
self.mapper = vtk.vtkDataSetMapper()
if vtk.VTK_MAJOR_VERSION <= 5:
self.mapper.SetInput(self.mesh)
else:
self.mapper.SetInputData(self.mesh)
self.actor = vtk.vtkActor()
self.actor.SetMapper(self.mapper)
self.actor.GetProperty().SetPointSize(5)
self.actor.GetProperty().SetEdgeColor(0, 0, 0)
self.actor.GetProperty().SetAmbient(0.3)
def ConvertDataSetToSurface(algorithmOutputPort):
dataSetSurfaceFilter = vtk.vtkDataSetSurfaceFilter()
dataSetSurfaceFilter.SetInputConnection(algorithmOutputPort)
dataSetSurfaceFilter.Update()
polyData = vtk.vtkPolyData()
polyData.ShallowCopy(dataSetSurfaceFilter.GetOutput())
return polyData
def vtkReadVTKfile(self, filename):
""" Lecture d'un fichier vtk"""
# Read the source file.
reader = vtk.vtkUnstructuredGridReader()
reader.SetFileName(filename)
reader.Update() # Needed because of GetScalarRange
surface_filter = vtk.vtkDataSetSurfaceFilter()
surface_filter.SetInputConnection(reader.GetOutputPort())
self.meshNormals = vtk.vtkPolyDataNormals()
self.meshNormals.SetInputConnection(surface_filter.GetOutputPort())
self.meshNormals.SetFeatureAngle(60.0)
self.meshNormals.ComputeCellNormalsOn()
self.meshNormals.ComputePointNormalsOn()
self.meshNormals.ConsistencyOn()
self.meshNormals.AutoOrientNormalsOn()
self.meshNormals.Update()
# Sauvegarde des proprietes maillage GMSH pour calcul centerline
self.gmeshNode = vtk_to_np(surface_filter.GetOutput().GetPoints().GetData())
self.gmeshTable = vtk_to_np(surface_filter.GetOutput().GetPolys().GetData())
# The quadric has nasty discontinuities from the way the edges are generated
# so let's pass it though a CleanPolyDataFilter and merge any points which
# are coincident, or very close
self.outputMesh = vtk.vtkCleanPolyData()
self.outputMesh.SetInputConnection(surface_filter.GetOutputPort())
self.outputMesh.SetTolerance(0.001)
def get_number_of_points_and_boundary_faces(pod_mode_dir,
calibrate_coefficients):
filename = pod_mode_dir + "/spatial_meanfield.vtk"
reader = vtk.vtkUnstructuredGridReader()
reader.ReadAllScalarsOn()
reader.ReadAllVectorsOn()
reader.ReadAllTensorsOn()
reader.SetFileName(filename)
reader.Update()
num_points = reader.GetOutput().GetNumberOfPoints()
if ((calibrate_coefficients == "none")
or (calibrate_coefficients == "constant")):
geom_filter = vtk.vtkDataSetSurfaceFilter()
geom_filter.SetInput(reader.GetOutput())
geom_filter.Update()
boundary_faces = vtk.vtkPolyData()
boundary_faces = geom_filter.GetOutput()
point_to_cell_data = vtk.vtkPointDataToCellData()
point_to_cell_data.SetInput(geom_filter.GetOutput())
point_to_cell_data.Update()
num_boundary_faces = point_to_cell_data.GetOutput().GetNumberOfCells()
else:
num_boundary_faces = 1
return num_points, num_boundary_faces
def __init__(self, renderer, data, type, index):
PeacockActor.__init__(self, renderer)
self.data = data
self.type = type
self.index = index
self.solid_visible = False
self.edges_visible = False
self.mesh = data.GetBlock(type).GetBlock(index)
self.geom = vtk.vtkDataSetSurfaceFilter()
if vtk.VTK_MAJOR_VERSION <= 5:
self.geom.SetInput(self.mesh)
else:
self.geom.SetInputData(self.mesh)
self.geom.Update()
self.mapper = vtk.vtkDataSetMapper()
if vtk.VTK_MAJOR_VERSION <= 5:
self.mapper.SetInput(self.mesh)
else:
self.mapper.SetInputData(self.mesh)
self.actor = vtk.vtkActor()
self.actor.SetMapper(self.mapper)
self.actor.GetProperty().SetPointSize(5)
self.actor.GetProperty().SetEdgeColor(0,0,0)
self.actor.GetProperty().SetAmbient(0.3);
def get_surface_faces(surface_mesh, bc_faces):
'''Get the faces from the surface mesh.
The faces are vtkPolyData objects with cell data arrays.
'''
print("\n========== get_surface_faces ==========")
face_ids = surface_mesh.GetCellData().GetArray(VtkDataNames.ModelFaceID)
face_ids_range = 2 * [0]
face_ids.GetRange(face_ids_range, 0)
min_id = int(face_ids_range[0])
max_id = int(face_ids_range[1])
print("[get_surface_faces] Face IDs range: {0:d} {1:d}".format(
min_id, max_id))
## Extract face geometry.
#
for i in range(min_id, max_id + 1):
if i not in bc_faces:
continue
print("[get_surface_faces] ----- Face ID {0:d} ----".format(i))
print("[get_surface_faces] Face name: {0:s} ".format(bc_faces[i].name))
threshold = vtk.vtkThreshold()
threshold.SetInputData(surface_mesh)
threshold.SetInputArrayToProcess(0, 0, 0, 1, VtkDataNames.ModelFaceID)
threshold.ThresholdBetween(i, i)
threshold.Update()
surfacer = vtk.vtkDataSetSurfaceFilter()
surfacer.SetInputData(threshold.GetOutput())
surfacer.Update()
bc_faces[i].set_mesh(surfacer.GetOutput())
print("[get_surface_faces] Face number of points: %d" %
bc_faces[i].mesh.GetNumberOfPoints())
print("[get_surface_faces] Face number of cells: %d" %
bc_faces[i].mesh.GetNumberOfCells())
def testLinear(self):
pts = vtk.vtkPoints()
pts.SetNumberOfPoints(4)
pts.InsertPoint(0, (0, 0, 0))
pts.InsertPoint(1, (1, 0, 0))
pts.InsertPoint(2, (0.5, 1, 0))
pts.InsertPoint(3, (0.5, 0.5, 1))
te = vtk.vtkTetra()
ptIds = te.GetPointIds()
for i in range(4):
ptIds.SetId(i, i)
ghosts = vtk.vtkUnsignedCharArray()
ghosts.SetName("vtkGhostLevels")
ghosts.SetNumberOfTuples(4)
ghosts.SetValue(0, 1)
ghosts.SetValue(1, 1)
ghosts.SetValue(2, 1)
ghosts.SetValue(3, 0)
grid = vtk.vtkUnstructuredGrid()
grid.Allocate(1, 1)
grid.InsertNextCell(te.GetCellType(), te.GetPointIds())
grid.SetPoints(pts)
grid.GetPointData().AddArray(ghosts)
dss = vtk.vtkDataSetSurfaceFilter()
dss.SetInputData(grid)
dss.Update()
self.assertEqual(dss.GetOutput().GetNumberOfCells(), 3)
def threshold(polydata, arrayname, valuerange=[0, 1], iscelldata=True,
allscalars=True):
"""Extract those cells from polydata whose pointdata/celldata values are
within a specified range.
For pointdata, cells are included if scalar values of all cell points are
within the range (allscalars=True) or if the scalar value of at least one of
the cell points is within the range (allscalar=False).
"""
thresholdfilter = vtk.vtkThreshold()
thresholdfilter.SetInput(polydata)
thresholdfilter.ThresholdBetween(valuerange[0], valuerange[1])
if iscelldata:
thresholdfilter.SetInputArrayToProcess(0, 0, 0,
vtk.vtkDataObject.
FIELD_ASSOCIATION_CELLS, arrayname)
else:
thresholdfilter.SetInputArrayToProcess(0, 0, 0,
vtk.vtkDataObject.
FIELD_ASSOCIATION_POINTS, arrayname)
if allscalars:
thresholdfilter.AllScalarsOn()
else:
thresholdfilter.AllScalarsOff()
thresholdfilter.Update()
surfacefilter = vtk.vtkDataSetSurfaceFilter()
surfacefilter.SetInput(thresholdfilter.GetOutput())
surfacefilter.Update()
return surfacefilter.GetOutput()
def write_boundary_edge_cells(self, edge_cell_ids):
'''Write a PolyData surface containing the cells incident to boundary edges.
This is for debugging.
'''
cell_mask = vtk.vtkIntArray()
cell_mask.SetNumberOfValues(num_cells)
cell_mask.SetName("CellMask")
for i in range(num_cells):
cell_mask.SetValue(i, 0)
surface.GetCellData().AddArray(cell_mask)
for cell_id in edge_cell_ids:
cell_mask.SetValue(cell_id, 1)
thresh = vtk.vtkThreshold()
thresh.SetInputData(surface)
thresh.ThresholdBetween(1, 1)
thresh.SetInputArrayToProcess(
0, 0, 0, "vtkDataObject::FIELD_ASSOCIATION_CELLS", "CellMask")
thresh.Update()
surfacefilter = vtk.vtkDataSetSurfaceFilter()
surfacefilter.SetInputData(thresh.GetOutput())
surfacefilter.Update()
edge_cells = surfacefilter.GetOutput()
writer = vtk.vtkXMLPolyDataWriter()
writer.SetFileName("boundary_edge_cells.vtp")
writer.SetInputData(edge_cells)
writer.Write()
def testLinear(self):
pts = vtk.vtkPoints()
pts.SetNumberOfPoints(4)
pts.InsertPoint(0, (0, 0, 0))
pts.InsertPoint(1, (1, 0, 0))
pts.InsertPoint(2, (0.5, 1, 0))
pts.InsertPoint(3, (0.5, 0.5, 1))
te = vtk.vtkTetra()
ptIds = te.GetPointIds()
for i in range(4):
ptIds.SetId(i, i)
ghosts = vtk.vtkUnsignedCharArray()
ghosts.SetName(vtk.vtkDataSetAttributes.GhostArrayName())
ghosts.SetNumberOfTuples(4)
ghosts.SetValue(0, 1)
ghosts.SetValue(1, 1)
ghosts.SetValue(2, 1)
ghosts.SetValue(3, 0)
grid = vtk.vtkUnstructuredGrid()
grid.Allocate(1, 1)
grid.InsertNextCell(te.GetCellType(), te.GetPointIds())
grid.SetPoints(pts)
grid.GetPointData().AddArray(ghosts)
dss = vtk.vtkDataSetSurfaceFilter()
dss.SetInputData(grid)
dss.Update()
self.assertEqual(dss.GetOutput().GetNumberOfCells(), 3)
def extractSurface(inputMesh):
""" Extract surface of a mesh. """
surfaceFilter = vtk.vtkDataSetSurfaceFilter()
surfaceFilter.SetInputData(inputMesh)
surfaceFilter.Update()
surface = surfaceFilter.GetOutput()
return surface
def _plotInternalCustomBoxfill(self):
"""Implements the logic to render a custom boxfill."""
self._mappers = []
self._customBoxfillArgs = self._prepContours()
tmpLevels = self._customBoxfillArgs["tmpLevels"]
tmpColors = self._customBoxfillArgs["tmpColors"]
tmpOpacities = self._customBoxfillArgs["tmpOpacities"]
style = self._gm.fillareastyle
luts = []
geos = []
wholeDataMin, wholeDataMax = vcs.minmax(self._originalData1)
_colorMap = self.getColorMap()
for i, l in enumerate(tmpLevels):
# Ok here we are trying to group together levels can be, a join
# will happen if: next set of levels continues where one left off
# AND pattern is identical
# TODO this should really just be a single polydata/mapper/actor:
for j, color in enumerate(tmpColors[i]):
mapper = vtk.vtkPolyDataMapper()
lut = vtk.vtkLookupTable()
th = vtk.vtkThreshold()
th.ThresholdBetween(l[j], l[j + 1])
# th.SetInputConnection(self._vtkPolyDataFilter.GetOutputPort())
th.SetInputData(self._vtkDataSetFittedToViewport)
geoFilter2 = vtk.vtkDataSetSurfaceFilter()
geoFilter2.SetInputConnection(th.GetOutputPort())
# Make the polydata output available here for patterning later
geoFilter2.Update()
geos.append(geoFilter2)
mapper.SetInputConnection(geoFilter2.GetOutputPort())
lut.SetNumberOfTableValues(1)
r, g, b, a = self.getColorIndexOrRGBA(_colorMap, color)
if style == 'solid':
tmpOpacity = tmpOpacities[j]
if tmpOpacity is None:
tmpOpacity = a / 100.
else:
tmpOpacity = tmpOpacities[j] / 100.
lut.SetTableValue(0, r / 100., g / 100., b / 100.,
tmpOpacity)
else:
lut.SetTableValue(0, 1., 1., 1., 0.)
mapper.SetLookupTable(lut)
mapper.SetScalarRange(l[j], l[j + 1])
luts.append([lut, [l[j], l[j + 1], False]])
# Store the mapper only if it's worth it?
# Need to do it with the whole slab min/max for animation
# purposes
if not (l[j + 1] < wholeDataMin or l[j] > wholeDataMax):
self._mappers.append(mapper)
self._resultDict["vtk_backend_luts"] = luts
if len(geos) > 0:
self._resultDict["vtk_backend_geofilters"] = geos
def putMaskOnVTKGrid(data,grid,actorColor=None,cellData=True,deep=True):
#Ok now looking
msk = data.mask
imsk = numpy_to_vtk_wrapper(msk.astype(numpy.int).flat,deep=deep)
mapper = None
if msk is not numpy.ma.nomask and not numpy.allclose(msk,False):
if actorColor is not None:
if grid.IsA("vtkStructuredGrid"):
grid2 = vtk.vtkStructuredGrid()
else:
grid2 = vtk.vtkUnstructuredGrid()
grid2.CopyStructure(grid)
geoFilter = vtk.vtkDataSetSurfaceFilter()
lut = vtk.vtkLookupTable()
r,g,b = actorColor
lut.SetNumberOfTableValues(2)
if not cellData:
grid2.GetPointData().RemoveArray(
vtk.vtkDataSetAttributes.GhostArrayName())
grid2.GetPointData().SetScalars(imsk)
#grid2.SetCellVisibilityArray(imsk)
#p2c = vtk.vtkPointDataToCellData()
#p2c.SetInputData(grid2)
#geoFilter.SetInputConnection(p2c.GetOutputPort())
geoFilter.SetInputData(grid2)
lut.SetTableValue(0,r/100.,g/100.,b/100.,1.)
lut.SetTableValue(1,r/100.,g/100.,b/100.,1.)
else:
grid2.GetCellData().RemoveArray(
vtk.vtkDataSetAttributes.GhostArrayName())
grid2.GetCellData().SetScalars(imsk)
geoFilter.SetInputData(grid2)
lut.SetTableValue(0,r/100.,g/100.,b/100.,0.)
lut.SetTableValue(1,r/100.,g/100.,b/100.,1.)
geoFilter.Update()
mapper = vtk.vtkPolyDataMapper()
mapper.SetInputData(geoFilter.GetOutput())
mapper.SetLookupTable(lut)
mapper.SetScalarRange(0,1)
# The ghost array now stores information about hidden (blanked)
# points/cells. Setting an array entry to the bitwise value
# `vtkDataSetAttributes.HIDDEN(CELL|POINT)` will blank the cell/point.
flatMask = msk.flat
ghost = numpy.zeros(len(flatMask), dtype=numpy.uint8)
invalidMaskValue = vtk.vtkDataSetAttributes.HIDDENCELL if cellData else \
vtk.vtkDataSetAttributes.HIDDENPOINT
for i, isInvalid in enumerate(flatMask):
if isInvalid:
ghost[i] = invalidMaskValue
ghost = numpy_to_vtk_wrapper(ghost, deep=deep)
ghost.SetName(vtk.vtkDataSetAttributes.GhostArrayName())
if cellData:
grid.GetCellData().AddArray(ghost)
else:
grid.GetPointData().AddArray(ghost)
return mapper
def _createPolyDataFilter(self):
"""Overrides baseclass implementation."""
self._vtkPolyDataFilter = vtk.vtkDataSetSurfaceFilter()
if self._useCellScalars:
p2c = vtk.vtkPointDataToCellData()
p2c.SetInputData(self._vtkDataSet)
self._vtkPolyDataFilter.SetInputConnection(p2c.GetOutputPort())
else:
self._vtkPolyDataFilter.SetInputData(self._vtkDataSet)
def get_surface_faces(self):
'''Get the faces from the surface mesh using the ModelFaceID data array.
The faces are vtkPolyData objects with cell data arrays.
'''
self.logger.info("========== get_surface_faces ==========")
face_ids = self.surface.GetCellData().GetArray(
VtkDataNames.ModelFaceID)
if face_ids == None:
self.logger.error("No ModelFaceID data.")
return
face_ids_range = 2 * [0]
face_ids.GetRange(face_ids_range, 0)
min_id = int(face_ids_range[0])
max_id = int(face_ids_range[1])
self.logger.info("Face IDs range: {0:d} {1:d}".format(min_id, max_id))
## Extract face geometry.
#
mesh_faces = {}
for i in range(min_id, max_id + 1):
#print("[Mesh.get_surface_faces] ---------- ID {0:d} ---------".format(i))
threshold = vtk.vtkThreshold()
threshold.SetInputData(self.surface)
threshold.SetInputArrayToProcess(0, 0, 0, 1,
VtkDataNames.ModelFaceID)
threshold.ThresholdBetween(i, i)
threshold.Update()
surfacer = vtk.vtkDataSetSurfaceFilter()
surfacer.SetInputData(threshold.GetOutput())
surfacer.Update()
mesh_faces[i] = Face(i, surfacer.GetOutput())
#print("Mesh.[get_surface_faces] Face number of points: %d" % mesh_faces[i].GetNumberOfPoints())
#print("Mesh.[get_surface_faces] Face number of cells: %d" % mesh_faces[i].GetNumberOfCells())
#write_surface_mesh("surface", mesh_faces[i], str(i))
#_for i in range(min_id, max_id+1)
self.boundary_faces = mesh_faces
center = [0.0, 0.0, 0.0]
total_num_pts = 0
for fid, face in self.boundary_faces.items():
npts = face.surface.GetNumberOfPoints()
ncells = face.surface.GetNumberOfCells()
self.logger.info(" id:{0:d} num cells: {1:d}".format(
face.model_face_id, ncells))
for i in range(0, npts):
point = face.surface.GetPoint(i)
center[0] += point[0]
center[1] += point[1]
center[2] += point[2]
total_num_pts += npts
center[0] /= total_num_pts
center[1] /= total_num_pts
center[2] /= total_num_pts
self.center = center
def delaunay3d(points):
"""Construct a 3D Delaunay triangulation from a set of points."""
delaunay = vtk.vtkDelaunay3D()
delaunay.SetInput(points)
delaunay.Update()
surface = vtk.vtkDataSetSurfaceFilter()
surface.SetInput(delaunay.GetOutput())
surface.Update()
return surface.GetOutput()
def setUp(self):
# corner-points (9)
c0=[[0,0,0],[1,0,0],[2,0,0]]
c1=[[0,1,0],[1,1,0],[2,1,0]]
c2=[[0,2,0],[1,2,0],[2,2,0]]
# mid nodes on horizontal edges (6)
mx0=[[.5,0,0],[1.5,0,0]]
mx1=[[.5,1,0],[1.5,1,0]]
mx2=[[.5,2,0],[1.5,2,0]]
# mid nodes on vertical edges (6)
my0=[[0,.5,0],[1,.5,0],[2,.5,0]]
my1=[[0,1.5,0],[1,1.5,0],[2,1.5,0]]
#
# create points and point data
pts=vtk.vtkPoints()
pts.Allocate(21)
self.point_ids=vtk.vtkIdTypeArray()
self.point_ids.SetName('point-ids')
self.point_values=vtk.vtkFloatArray()
self.point_values.SetName('point-values')
i=1
for coords in (c0,c1,c2,mx0,mx1,mx2,my0,my1):
for xyz in coords:
pts.InsertNextPoint(xyz[0],xyz[1],xyz[2])
self.point_ids.InsertNextValue(i+100)
i+=1
self.point_values.InsertNextValue( float(i) / 10 )
#
# create cells and cell data
corners=[(0,1,4,3),
(1,2,5,4),
(3,4,7,6),
(4,5,8,7)]
midnodes=[(9+0,15+1,9+2,15+0),
(9+1,15+2,9+3,15+1),
(9+2,15+4,9+4,15+3),
(9+3,15+5,9+5,15+4)]
self.ug=vtk.vtkUnstructuredGrid()
self.ug.SetPoints(pts)
self.ug.Allocate(4)
self.cell_ids=vtk.vtkIdTypeArray()
self.cell_ids.SetName('cell-ids')
i=1
for (c,m) in zip(corners,midnodes):
self.ug.InsertNextCell(vtk.VTK_QUADRATIC_QUAD,8,(c+m))
self.cell_ids.InsertNextValue(i+1000)
i+=1
self.ug.GetPointData().AddArray(self.point_ids)
self.ug.GetPointData().AddArray(self.point_values)
self.ug.GetCellData().AddArray(self.cell_ids)
#
# create the surface-filter
surface=vtk.vtkDataSetSurfaceFilter()
surface.SetInputData(self.ug)
surface.Update()
self.output=surface.GetOutput()
def delaunay3d(points):
"""Construct a 3D Delaunay triangulation from a set of points."""
delaunay = vtk.vtkDelaunay3D()
delaunay.SetInput(points)
delaunay.Update()
surface = vtk.vtkDataSetSurfaceFilter()
surface.SetInput(delaunay.GetOutput())
surface.Update()
return surface.GetOutput()
def __init__(self, module_manager):
SimpleVTKClassModuleBase.__init__(self,
module_manager,
vtk.vtkDataSetSurfaceFilter(),
'Processing.', ('vtkDataSet', ),
('vtkPolyData', ),
replaceDoc=True,
inputFunctions=None,
outputFunctions=None)
def _plotInternalCustomBoxfill(self):
"""Implements the logic to render a custom boxfill."""
self._mappers = []
self._customBoxfillArgs = self._prepContours()
tmpLevels = self._customBoxfillArgs["tmpLevels"]
tmpColors = self._customBoxfillArgs["tmpColors"]
tmpOpacities = self._customBoxfillArgs["tmpOpacities"]
style = self._gm.fillareastyle
luts = []
geos = []
wholeDataMin, wholeDataMax = vcs.minmax(self._originalData1)
_colorMap = self.getColorMap()
assert(style != 'solid' or len(tmpLevels) == 1)
for i, l in enumerate(tmpLevels):
# Ok here we are trying to group together levels can be, a join
# will happen if: next set of levels continues where one left off
# AND pattern is identical
# TODO this should really just be a single polydata/mapper/actor:
for j, color in enumerate(tmpColors[i]):
mapper = vtk.vtkPolyDataMapper()
lut = vtk.vtkLookupTable()
th = vtk.vtkThreshold()
th.ThresholdBetween(l[j], l[j + 1])
th.SetInputConnection(self._vtkPolyDataFilter.GetOutputPort())
geoFilter2 = vtk.vtkDataSetSurfaceFilter()
geoFilter2.SetInputConnection(th.GetOutputPort())
# Make the polydata output available here for patterning later
geoFilter2.Update()
geos.append(geoFilter2)
mapper.SetInputConnection(geoFilter2.GetOutputPort())
lut.SetNumberOfTableValues(1)
r, g, b, a = self.getColorIndexOrRGBA(_colorMap, color)
if style == 'solid':
tmpOpacity = tmpOpacities[j]
if tmpOpacity is None:
tmpOpacity = a / 100.
else:
tmpOpacity = tmpOpacities[j] / 100.
lut.SetTableValue(0, r / 100., g / 100., b / 100., tmpOpacity)
else:
lut.SetTableValue(0, 1., 1., 1., 0.)
mapper.SetLookupTable(lut)
mapper.SetScalarRange(l[j], l[j + 1])
luts.append([lut, [l[j], l[j + 1], False]])
# Store the mapper only if it's worth it?
# Need to do it with the whole slab min/max for animation
# purposes
if not (l[j + 1] < wholeDataMin or l[j] > wholeDataMax):
self._mappers.append(mapper)
self._resultDict["vtk_backend_luts"] = luts
if len(geos) > 0:
self._resultDict["vtk_backend_geofilters"] = geos
def _createPolyDataFilter(self):
"""Overrides baseclass implementation."""
self._vtkPolyDataFilter = vtk.vtkDataSetSurfaceFilter()
if self._useCellScalars:
p2c = vtk.vtkPointDataToCellData()
p2c.SetInputData(self._vtkDataSet)
self._vtkPolyDataFilter.SetInputConnection(p2c.GetOutputPort())
else:
self._vtkPolyDataFilter.SetInputData(self._vtkDataSet)
def __surface_filter__(Obj):
print "[surface_filter] <-\'%s\' ->" % Obj.GetClassName(),
GetOutputPort = Obj.GetOutputPort()
surfaceFilter = vtk.vtkDataSetSurfaceFilter()
surfaceFilter.SetInputConnection(GetOutputPort)
surfaceFilter.Update()
__save_vtp__(Obj.GetClassName(), surfaceFilter.GetOutput())
return surfaceFilter
def write_stl(ugrid, filename):
surface_filter = vtk.vtkDataSetSurfaceFilter()
surface_filter.SetInputData(ugrid)
triangle_filter = vtk.vtkTriangleFilter()
triangle_filter.SetInputConnection(surface_filter.GetOutputPort())
writer = vtk.vtkSTLWriter()
writer.SetFileName(filename)
writer.SetInputConnection(triangle_filter.GetOutputPort())
writer.Write()
def cellthreshold(polydata, arrayname, start=0, end=1):
threshold = vtk.vtkThreshold()
threshold.SetInputData(polydata)
threshold.SetInputArrayToProcess(0,0,0,vtk.vtkDataObject.FIELD_ASSOCIATION_CELLS,arrayname)
threshold.ThresholdBetween(start,end)
threshold.Update()
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInputConnection(threshold.GetOutputPort())
surfer.Update()
return surfer.GetOutput()
def _createPolyDataFilter(self):
"""Overrides baseclass implementation."""
self._vtkPolyDataFilter = vtk.vtkDataSetSurfaceFilter()
if self._useCellScalars:
# Sets data to point instead of just cells
c2p = vtk.vtkCellDataToPointData()
c2p.SetInputData(self._vtkDataSet)
c2p.Update()
# For contouring duplicate points seem to confuse it
self._vtkPolyDataFilter.SetInputConnection(c2p.GetOutputPort())
else:
self._vtkPolyDataFilter.SetInputData(self._vtkDataSet)
self._resultDict["vtk_backend_filter"] = self._vtkPolyDataFilter
def pointthreshold(polydata, arrayname, start=0, end=1,alloff=0):
threshold = vtk.vtkThreshold()
threshold.SetInputData(polydata)
threshold.SetInputArrayToProcess(0,0,0,vtk.vtkDataObject.FIELD_ASSOCIATION_POINTS,arrayname)
threshold.ThresholdBetween(start,end)
if (alloff):
threshold.AllScalarsOff()
threshold.Update()
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInputConnection(threshold.GetOutputPort())
surfer.Update()
return surfer.GetOutput()
def main():
pointSource = vtk.vtkPointSource()
pointSource.SetNumberOfPoints(20)
pointSource.Update()
idFilter = vtk.vtkIdFilter()
idFilter.SetInputConnection(pointSource.GetOutputPort())
idFilter.SetIdsArrayName("OriginalIds")
idFilter.Update()
surfaceFilter = vtk.vtkDataSetSurfaceFilter()
surfaceFilter.SetInputConnection(idFilter.GetOutputPort())
surfaceFilter.Update()
poly_input = surfaceFilter.GetOutput()
# Create a mapper and actor
mapper = vtk.vtkPolyDataMapper()
if vtk.VTK_MAJOR_VERSION <= 5:
mapper.SetInputConnection(poly_input.GetProducerPort())
else:
mapper.SetInputData(poly_input)
mapper.ScalarVisibilityOff()
actor = vtk.vtkActor()
actor.SetMapper(mapper)
# Visualize
renderer = vtk.vtkRenderer()
renderWindow = vtk.vtkRenderWindow()
renderWindow.AddRenderer(renderer)
areaPicker = vtk.vtkAreaPicker()
renderWindowInteractor = vtk.vtkRenderWindowInteractor()
renderWindowInteractor.SetPicker(areaPicker)
renderWindowInteractor.SetRenderWindow(renderWindow)
renderer.AddActor(actor)
#renderer.SetBackground(1,1,1) # Background color white
renderWindow.Render()
style = vtk.vtkRenderWindowInteractor()
#style = myInteractorStyle()
#style = InteractorStyle()
#style = QVTKRenderWindowInteractor()
#style.SetPoints(poly_input)
renderWindowInteractor.SetInteractorStyle(style)
renderWindowInteractor.Start()
def _plotInternalBoxfill(self):
"""Implements the logic to render a non-custom boxfill."""
# Prep mapper
mapper = vtk.vtkPolyDataMapper()
self._mappers = [mapper]
if self._gm.ext_1 and self._gm.ext_2:
mapper.SetInputConnection(self._vtkPolyDataFilter.GetOutputPort())
self._resultDict["vtk_backend_geofilters"] = \
[self._vtkPolyDataFilter]
else:
thr = vtk.vtkThreshold()
thr.SetInputConnection(self._vtkPolyDataFilter.GetOutputPort())
if not self._gm.ext_1 and not self._gm.ext_2:
thr.ThresholdBetween(self._contourLevels[0],
self._contourLevels[-1])
elif self._gm.ext_1 and not self._gm.ext_2:
thr.ThresholdByLower(self._contourLevels[-1])
elif not self._gm.ext_1 and self._gm.ext_2:
thr.ThresholdByUpper(self._contourLevels[0])
geoFilter2 = vtk.vtkDataSetSurfaceFilter()
geoFilter2.SetInputConnection(thr.GetOutputPort())
mapper.SetInputConnection(geoFilter2.GetOutputPort())
self._resultDict["vtk_backend_geofilters"] = [geoFilter2]
# Colortable bit
# make sure length match
numLevels = len(self._contourLevels)
while len(self._contourColors) < numLevels:
self._contourColors.append(self._contourColors[-1])
lut = vtk.vtkLookupTable()
lut.SetNumberOfTableValues(numLevels)
_colorMap = self.getColorMap()
for i in range(numLevels):
r, g, b, a = self.getColorIndexOrRGBA(_colorMap, self._contourColors[i])
lut.SetTableValue(i, r / 100., g / 100., b / 100., a / 100.)
mapper.SetLookupTable(lut)
if numpy.allclose(self._contourLevels[0], -1.e20):
lmn = self._min - 1.
else:
lmn = self._contourLevels[0]
if numpy.allclose(self._contourLevels[-1], 1.e20):
lmx = self._mx + 1.
else:
lmx = self._contourLevels[-1]
mapper.SetScalarRange(lmn, lmx)
self._resultDict["vtk_backend_luts"] = [[lut, [lmn, lmx, True]]]
def __init__(self, renderer, mesh):
PeacockActor.__init__(self, renderer)
self.mesh = mesh
self.geom = vtk.vtkDataSetSurfaceFilter()
self.geom.SetInput(self.mesh)
self.geom.Update()
self.mapper = vtk.vtkPolyDataMapper()
self.mapper.SetInput(self.geom.GetOutput())
self.actor = vtk.vtkActor();
self.actor.SetMapper(self.mapper);
self.actor.GetProperty().SetPointSize(5)
self.actor.GetProperty().SetEdgeColor(0,0,0)
self.actor.GetProperty().SetAmbient(0.3);
def countregions(polydata):
# NOTE: preventive measures: clean before connectivity filter
# to avoid artificial regionIds
# It slices the surface down the middle
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInputData(polydata)
surfer.Update()
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInputConnection(surfer.GetOutputPort())
cleaner.Update()
connect = vtk.vtkPolyDataConnectivityFilter()
connect.SetInputConnection(cleaner.GetOutputPort())
connect.Update()
return connect.GetNumberOfExtractedRegions()
def AddDataSet(self, dataset, property=None):
'''
Add a dataset to the view (has to be subclass of vtkPointSet).
The dataset will be cut through the implicit slice plane
(GetImplicitSlicePlane()).
This results in a loss of dimensionality, i.e. tetrahedron will be displayed
as triangles, triangles as lines, lines as points.
A vtkProperty of the dataset can be specified.
@param dataset: vtkDataSet
@param property: vtkProperty
@return: vtkActor
'''
if not dataset or self.getDataSetCollection().IsItemPresent(dataset):
return None
if vtk.vtkImageData.SafeDownCast(dataset):
self.SetInput(vtk.vtkImageData.SafeDownCast(dataset))
return None
geometryextractor = vtk.vtkDataSetSurfaceFilter()
normalextractor = vtk.vtkPolyDataNormals()
mapper = vtk.vtkPolyDataMapper()
actor = vtk.vtkActor()
normalextractor.SetFeatureAngle(90)
# try to skip the normal extraction filter in order to enhance the visualization speed when the data is time sequence.
geometryextractor.SetInput(dataset)
normalextractor.SetInput(geometryextractor.GetOutput())
mapper.SetInput(normalextractor.GetOutput())
actor.SetMapper(mapper)
if property:
actor.SetProperty(property)
self.GetRenderer().AddViewProp(actor)
self.getDataSetCollection().AddItem(dataset)
self.getProp3DCollection().AddItem(actor)
self.GetRenderer().AddViewProp(actor)
del mapper
del normalextractor
del geometryextractor
del actor
def extractclosestpointregion(polydata, point=[0, 0, 0]):
# NOTE: preventive measures: clean before connectivity filter
# to avoid artificial regionIds
# It slices the surface down the middle
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInputData(polydata)
surfer.Update()
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInputConnection(surfer.GetOutputPort())
cleaner.Update()
connect = vtk.vtkPolyDataConnectivityFilter()
connect.SetInputConnection(cleaner.GetOutputPort())
connect.SetExtractionModeToClosestPointRegion()
connect.SetClosestPoint(point)
connect.Update()
return connect.GetOutput()
def extractconnectedregion(polydata, regionid):
# NOTE: preventive measures: clean before connectivity filter
# to avoid artificial regionIds
# It slices the surface down the middle
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInputData(polydata)
surfer.Update()
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInputConnection(surfer.GetOutputPort())
cleaner.Update()
connect = vtk.vtkPolyDataConnectivityFilter()
connect.SetInputConnection(cleaner.GetOutputPort())
connect.SetExtractionModeToAllRegions()
connect.ColorRegionsOn()
connect.Update()
surface = pointthreshold(connect.GetOutput(),'RegionId',float(regionid),float(regionid))
return surface
def convexHull(thePoints, color):
points = vtk.vtkPoints()
for pt in thePoints:
points.InsertNextPoint(*pt)
polydata = vtk.vtkPolyData()
polydata.SetPoints(points)
delaunay = vtk.vtkDelaunay3D()
delaunay.SetInput(polydata)
delaunay.Update()
surfaceFilter = vtk.vtkDataSetSurfaceFilter()
surfaceFilter.SetInputConnection(delaunay.GetOutputPort())
surfaceFilter.Update()
mapper = vtk.vtkPolyDataMapper()
mapper.SetInput(surfaceFilter.GetOutput())
actor = vtk.vtkActor()
actor.SetMapper(mapper)
actor.GetProperty().SetColor(*color)
actor.GetProperty().SetOpacity(0.5)
ren.AddActor(actor)
def _createPolyDataFilter(self):
"""This is only used when we use the grid stored in the file for all plots."""
self._vtkPolyDataFilter = vtk.vtkDataSetSurfaceFilter()
if self._hasCellData == self._needsCellData:
self._vtkPolyDataFilter.SetInputData(self._vtkDataSet)
elif self._hasCellData:
# use cells but needs points
c2p = vtk.vtkCellDataToPointData()
c2p.PassCellDataOn()
c2p.SetInputData(self._vtkDataSet)
self._vtkPolyDataFilter.SetInputConnection(c2p.GetOutputPort())
else:
# use points but needs cells
p2c = vtk.vtkPointDataToCellData()
p2c.SetInputData(self._vtkDataSet)
# For contouring duplicate points seem to confuse it
self._vtkPolyDataFilter.SetInputConnection(p2c.GetOutputPort())
self._vtkPolyDataFilter.Update()
self._resultDict["vtk_backend_filter"] = self._vtkPolyDataFilter
# create an actor and a renderer for the surface mesh.
# this is used for displaying point information using the hardware selection
mapper = vtk.vtkPolyDataMapper()
mapper.SetInputConnection(self._vtkPolyDataFilter.GetOutputPort())
act = vtk.vtkActor()
act.SetMapper(mapper)
vp = self._resultDict.get(
'ratio_autot_viewport',
[self._template.data.x1, self._template.data.x2,
self._template.data.y1, self._template.data.y2])
plotting_dataset_bounds = self.getPlottingBounds()
surface_renderer, xScale, yScale = self._context().fitToViewport(
act, vp,
wc=plotting_dataset_bounds, geoBounds=self._vtkDataSet.GetBounds(),
geo=self._vtkGeoTransform,
priority=self._template.data.priority,
create_renderer=True)
self._resultDict['surface_renderer'] = surface_renderer
self._resultDict['surface_scale'] = (xScale, yScale)
if (surface_renderer):
surface_renderer.SetDraw(False)
def extractlargestregion(polydata):
# NOTE: preventive measures: clean before connectivity filter
# to avoid artificial regionIds
# It slices the surface down the middle
surfer = vtk.vtkDataSetSurfaceFilter()
surfer.SetInputData(polydata)
surfer.Update()
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInputConnection(surfer.GetOutputPort())
cleaner.Update()
connect = vtk.vtkPolyDataConnectivityFilter()
connect.SetInputConnection(cleaner.GetOutputPort())
connect.SetExtractionModeToLargestRegion()
connect.Update()
# leaves phantom points ....
cleaner = vtk.vtkCleanPolyData()
cleaner.SetInputConnection(connect.GetOutputPort())
cleaner.Update()
return cleaner.GetOutput()