def __init__(self, module_manager):
# initialise our base class
ModuleBase.__init__(self, module_manager)
# these will be our markers
self._inputPoints = None
# we can't connect the image input directly to the masksource,
# so we have to keep track of it separately.
self._inputImage = None
self._inputImageObserverID = None
# we need to modify the mask (I) as well. The problem with a
# ProgrammableFilter is that you can't request GetOutput() before
# the input has been set...
self._maskSource = vtk.vtkProgrammableSource()
self._maskSource.SetExecuteMethod(self._maskSourceExecute)
self._dualGreyReconstruct = vtkdevide.vtkImageGreyscaleReconstruct3D()
# first input is I (the modified mask)
self._dualGreyReconstruct.SetDual(1)
self._dualGreyReconstruct.SetInput1(
self._maskSource.GetStructuredPointsOutput())
# we'll use this to synthesise a volume according to the seed points
self._markerSource = vtk.vtkProgrammableSource()
self._markerSource.SetExecuteMethod(self._markerSourceExecute)
# second input is J (the marker)
self._dualGreyReconstruct.SetInput2(
self._markerSource.GetStructuredPointsOutput())
# we'll use this to change the markerImage into something we can use
self._imageThreshold = vtk.vtkImageThreshold()
# everything equal to or above 1.0 will be "on"
self._imageThreshold.ThresholdByUpper(1.0)
self._imageThresholdObserverID = self._imageThreshold.AddObserver(
'EndEvent', self._observerImageThreshold)
module_utils.setup_vtk_object_progress(
self, self._dualGreyReconstruct,
'Performing dual greyscale reconstruction')
NoConfigModuleMixin.__init__(
self, {
'Module (self)': self,
'vtkImageGreyscaleReconstruct3D': self._dualGreyReconstruct
})
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# initialise our base class
ModuleBase.__init__(self, module_manager)
self._greyReconstruct = vtkdevide.vtkImageGreyscaleReconstruct3D()
NoConfigModuleMixin.__init__(
self,
{'Module (self)' : self,
'vtkImageGreyscaleReconstruct3D' : self._greyReconstruct})
module_utils.setup_vtk_object_progress(
self, self._greyReconstruct,
'Performing greyscale reconstruction')
self.sync_module_logic_with_config()
def __init__(self, module_manager):
ModuleBase.__init__(self, module_manager)
self._imageBorderMask = vtkdevide.vtkImageBorderMask()
# input image value for border
self._imageBorderMask.SetBorderMode(1)
# maximum of output for interior
self._imageBorderMask.SetInteriorMode(3)
self._imageGreyReconstruct = vtkdevide.vtkImageGreyscaleReconstruct3D()
# we're going to use the dual, instead of inverting mask and image,
# performing greyscale reconstruction, and then inverting the result
# again. (we should compare results though)
self._imageGreyReconstruct.SetDual(1)
# marker J is second input
self._imageGreyReconstruct.SetInput(1,
self._imageBorderMask.GetOutput())
module_utils.setup_vtk_object_progress(self, self._imageBorderMask,
'Creating image mask.')
module_utils.setup_vtk_object_progress(self,
self._imageGreyReconstruct,
'Performing reconstruction.')
self._config.holesTouchEdges = (0, 0, 0, 0, 0, 0)
configList = [
('Allow holes to touch edges:', 'holesTouchEdges', 'tuple:int,6',
'text',
'Indicate which edges (minX, maxX, minY, maxY, minZ, maxZ) may\n'
'be touched by holes. In other words, a hole touching such an\n'
'edge will not be considered background and will be filled.')
]
ScriptedConfigModuleMixin.__init__(
self, configList, {
'Module (self)': self,
'vtkImageBorderMask': self._imageBorderMask,
'vtkImageGreyReconstruct': self._imageGreyReconstruct
})
self.sync_module_logic_with_config()
def __init__(self, module_manager):
# initialise our base class
ModuleBase.__init__(self, module_manager)
# these will be our markers
self._inputPoints = None
# we can't connect the image input directly to the masksource,
# so we have to keep track of it separately.
self._inputImage = None
self._inputImageObserverID = None
# we need to modify the mask (I) as well. The problem with a
# ProgrammableFilter is that you can't request GetOutput() before
# the input has been set...
self._maskSource = vtk.vtkProgrammableSource()
self._maskSource.SetExecuteMethod(self._maskSourceExecute)
self._dualGreyReconstruct = vtkdevide.vtkImageGreyscaleReconstruct3D()
# first input is I (the modified mask)
self._dualGreyReconstruct.SetDual(1)
self._dualGreyReconstruct.SetInput1(self._maskSource.GetStructuredPointsOutput())
# we'll use this to synthesise a volume according to the seed points
self._markerSource = vtk.vtkProgrammableSource()
self._markerSource.SetExecuteMethod(self._markerSourceExecute)
# second input is J (the marker)
self._dualGreyReconstruct.SetInput2(self._markerSource.GetStructuredPointsOutput())
# we'll use this to change the markerImage into something we can use
self._imageThreshold = vtk.vtkImageThreshold()
# everything equal to or above 1.0 will be "on"
self._imageThreshold.ThresholdByUpper(1.0)
self._imageThresholdObserverID = self._imageThreshold.AddObserver("EndEvent", self._observerImageThreshold)
module_utils.setup_vtk_object_progress(
self, self._dualGreyReconstruct, "Performing dual greyscale reconstruction"
)
NoConfigModuleMixin.__init__(
self, {"Module (self)": self, "vtkImageGreyscaleReconstruct3D": self._dualGreyReconstruct}
)
self.sync_module_logic_with_config()
def __init__(self, module_manager):
ModuleBase.__init__(self, module_manager)
self._imageBorderMask = vtkdevide.vtkImageBorderMask()
# input image value for border
self._imageBorderMask.SetBorderMode(1)
# maximum of output for interior
self._imageBorderMask.SetInteriorMode(3)
self._imageGreyReconstruct = vtkdevide.vtkImageGreyscaleReconstruct3D()
# we're going to use the dual, instead of inverting mask and image,
# performing greyscale reconstruction, and then inverting the result
# again. (we should compare results though)
self._imageGreyReconstruct.SetDual(1)
# marker J is second input
self._imageGreyReconstruct.SetInput(
1, self._imageBorderMask.GetOutput())
module_utils.setup_vtk_object_progress(self, self._imageBorderMask,
'Creating image mask.')
module_utils.setup_vtk_object_progress(self, self._imageGreyReconstruct,
'Performing reconstruction.')
self._config.holesTouchEdges = (0,0,0,0,0,0)
configList = [
('Allow holes to touch edges:', 'holesTouchEdges',
'tuple:int,6', 'text',
'Indicate which edges (minX, maxX, minY, maxY, minZ, maxZ) may\n'
'be touched by holes. In other words, a hole touching such an\n'
'edge will not be considered background and will be filled.')
]
ScriptedConfigModuleMixin.__init__(
self, configList,
{'Module (self)' : self,
'vtkImageBorderMask' : self._imageBorderMask,
'vtkImageGreyReconstruct' : self._imageGreyReconstruct})
self.sync_module_logic_with_config()
def __init__(self, module_manager):
ModuleBase.__init__(self, module_manager)
self._imageMathSubtractH = vtk.vtkImageMathematics()
self._imageMathSubtractH.SetOperationToAddConstant()
self._reconstruct = vtkdevide.vtkImageGreyscaleReconstruct3D()
# second input is marker
self._reconstruct.SetInput(1, self._imageMathSubtractH.GetOutput())
self._imageMathSubtractR = vtk.vtkImageMathematics()
self._imageMathSubtractR.SetOperationToSubtract()
self._imageMathSubtractR.SetInput(1, self._reconstruct.GetOutput())
module_utils.setup_vtk_object_progress(self, self._imageMathSubtractH,
'Preparing marker image.')
module_utils.setup_vtk_object_progress(self, self._reconstruct,
'Performing reconstruction.')
module_utils.setup_vtk_object_progress(self, self._imageMathSubtractR,
'Subtracting reconstruction.')
self._config.h = 50
configList = [
('H-dome height:', 'h', 'base:float', 'text',
'The required difference in brightness between an h-dome and\n'
'its surroundings.')]
ScriptedConfigModuleMixin.__init__(
self, configList,
{'Module (self)' : self,
'ImageMath Subtract H' : self._imageMathSubtractH,
'ImageGreyscaleReconstruct3D' : self._reconstruct,
'ImageMath Subtract R' : self._imageMathSubtractR})
self.sync_module_logic_with_config()
