Exemplo n.º 1
0
    def __call__(self, url, name, position=None, opacity=0.5, tile=False,
                 scale=1.0, greyscale=False, rotation=0, obscure=OBSCURE,
                 quality=QUALITY, random_position_once=RANDOM_POS_ONCE):
        """
        Creates a watermarked copy of an image.

        * ``name``: This is the name of the Watermark object that you wish to
          apply to the image.
        * ``position``:  There are several options.

            * ``R``: random placement, which is the default behavior.
            * ``C``: center the watermark
            * ``XxY`` where ``X`` is either a specific pixel position on the
              x-axis or a percentage of the total width of the target image and
              ``Y`` is a specific pixel position on the y-axis of the image or
              a percentage of the total height of the target image.  These
              values represent the location of the top and left edges of the
              watermark.  If either ``X`` or ``Y`` is a percentage, you must
              use a percent sign.  This is not used if either one of the
              ``tiled`` or ``scale`` parameters are true.

              Examples:

                * ``50%x50%``: positions the watermark at the center of the
                  image.
                * ``50%x100``: positions the watermark at the midpoint of the
                  total width of the image and 100 pixels from the top of the
                  image
                * ``100x50%``: positions the watermark at the midpoint of the
                  total height of the image and 100 pixels from the left edge
                  of the image
                * ``100x100``: positions the top-left corner of the watermark
                  at 100 pixels from the top of the image and 100 pixels from
                  the left edge of the image.

            * ``br``, ``bl``, ``tr``, ``tl`` where ``b`` means "bottom", ``t``
              means "top", ``l`` means "left", and ``r`` means "right".  This
              will position the watermark at the extreme edge of the original
              image with just enough room for the watermark to "fully show".
              This assumes the watermark is not as big as the original image.

        * ``opacity``: an integer from 0 to 100.  This value represents the
          transparency level of the watermark when it is applied.  A value of
          100 means the watermark is completely opaque while a value of 0 means
          the watermark will be invisible.
        * ``tile``: ``True`` or ``False`` to specify whether or not the
          watermark shall be tiled across the entire image.
        * ``scale``: a floating-point number above 0 to specify the scaling for
          the watermark.  If you want the watermark to be scaled to its maximum
          without falling off the edge of the target image, use ``F``.  By
          default, scale is set to ``1.0``, or 1:1 scaling, meaning the
          watermark will be placed on the target image at its original size.
        * ``greyscale``: ``True`` or ``False`` to specify whether or not the
          watermark should be converted to a greyscale image before applying it
          to the target image.  Default is ``False``.
        * ``rotation``: 0 to 359 to specify the number of degrees to rotate the
          watermark before applying it to the target image.  Alternatively, you
          may set ``rotation=R`` for a random rotation value.
        * ``obscure``: set to ``False`` if you wish to expose the original
          image's filename.  Defaults to ``True``.
        * ``quality``: the quality of the resulting watermarked image.  Default
          is 85.
        """

        # look for the specified watermark by name.  If it's not there, go no
        # further
        try:
            watermark = Watermark.objects.get(name=name, is_active=True)
        except Watermark.DoesNotExist:
            log.error('Watermark "%s" does not exist... Bailing out.' % name)
            return url

        # make sure URL is a string
        url = str(url)

        basedir = '%s/watermarked' % os.path.dirname(url)
        base, ext = os.path.splitext(os.path.basename(url))

        # open the target image file along with the watermark image
        target_path = self.get_url_path(url)
        target = Image.open(target_path)
        mark = Image.open(watermark.image.path)

        # determine the actual value that the parameters provided will render
        random_position = bool(position is None or str(position).lower() == 'r')
        scale = utils.determine_scale(scale, target, mark)
        rotation = utils.determine_rotation(rotation, mark)
        pos = utils.determine_position(position, target, mark)

        # see if we need to create only one randomly positioned watermarked
        # image
        if not random_position or \
            (not random_position_once and random_position):
            log.debug('Generating random position for watermark each time')
            position = pos
        else:
            log.debug('Random positioning watermark once')

        params = {
            'position':  position,
            'opacity':   opacity,
            'scale':     scale,
            'tile':      tile,
            'greyscale': greyscale,
            'rotation':  rotation,
            'base':      base,
            'ext':       ext,
            'quality':   quality,
            'watermark': watermark.id,
            'opacity_int': int(opacity * 100),
            'left':      pos[0],
            'top':       pos[1],
        }
        log.debug('Params: %s' % params)

        wm_name = self.watermark_name(mark, **params)
        wm_url = self.watermark_path(basedir, base, ext, wm_name, obscure)
        wm_path = self.get_url_path(wm_url)
        log.debug('Watermark name: %s; URL: %s; Path: %s' % (
            wm_name, wm_url, wm_path
        ))

        # see if the image already exists on the filesystem.  If it does, use
        # it.
        if os.access(wm_path, os.R_OK):
            # see if the Watermark object was modified since the file was
            # created
            modified = datetime.fromtimestamp(os.path.getmtime(wm_path))

            # only return the old file if things appear to be the same
            if modified >= watermark.date_updated:
                log.info('Watermark exists and has not changed.  Bailing out.')
                return wm_url

        # make sure the position is in our params for the watermark
        params['position'] = pos

        self.create_watermark(target, mark, wm_path, **params)

        # send back the URL to the new, watermarked image
        return wm_url
Exemplo n.º 2
0
    def __call__(self,
                 url,
                 name,
                 position=None,
                 opacity=0.5,
                 tile=False,
                 scale=1.0,
                 greyscale=False,
                 rotation=0,
                 obscure=OBSCURE_ORIGINAL,
                 quality=QUALITY,
                 random_position_once=RANDOM_POSITION_ONCE):
        """
        Creates a watermarked copy of an image.

        * ``name``: This is the name of the Watermark object that you wish to
          apply to the image.
        * ``position``:  There are several options.

            * ``R``: random placement, which is the default behavior.
            * ``C``: center the watermark
            * ``XxY`` where ``X`` is either a specific pixel position on the
              x-axis or a percentage of the total width of the target image and
              ``Y`` is a specific pixel position on the y-axis of the image or
              a percentage of the total height of the target image.  These
              values represent the location of the top and left edges of the
              watermark.  If either ``X`` or ``Y`` is a percentage, you must
              use a percent sign.  This is not used if either one of the
              ``tiled`` or ``scale`` parameters are true.

              Examples:

                * ``50%x50%``: positions the watermark at the center of the
                  image.
                * ``50%x100``: positions the watermark at the midpoint of the
                  total width of the image and 100 pixels from the top of the
                  image
                * ``100x50%``: positions the watermark at the midpoint of the
                  total height of the image and 100 pixels from the left edge
                  of the image
                * ``100x100``: positions the top-left corner of the watermark
                  at 100 pixels from the top of the image and 100 pixels from
                  the left edge of the image.

            * ``br``, ``bl``, ``tr``, ``tl`` where ``b`` means "bottom", ``t``
              means "top", ``l`` means "left", and ``r`` means "right".  This
              will position the watermark at the extreme edge of the original
              image with just enough room for the watermark to "fully show".
              This assumes the watermark is not as big as the original image.

        * ``opacity``: an integer from 0 to 100.  This value represents the
          transparency level of the watermark when it is applied.  A value of
          100 means the watermark is completely opaque while a value of 0 means
          the watermark will be invisible.
        * ``tile``: ``True`` or ``False`` to specify whether or not the
          watermark shall be tiled across the entire image.
        * ``scale``: a floating-point number above 0 to specify the scaling for
          the watermark.  If you want the watermark to be scaled to its maximum
          without falling off the edge of the target image, use ``F``.  By
          default, scale is set to ``1.0``, or 1:1 scaling, meaning the
          watermark will be placed on the target image at its original size.
        * ``greyscale``: ``True`` or ``False`` to specify whether or not the
          watermark should be converted to a greyscale image before applying it
          to the target image.  Default is ``False``.
        * ``rotation``: 0 to 359 to specify the number of degrees to rotate the
          watermark before applying it to the target image.  Alternatively, you
          may set ``rotation=R`` for a random rotation value.
        * ``obscure``: set to ``False`` if you wish to expose the original
          image's filename.  Defaults to ``True``.
        * ``quality``: the quality of the resulting watermarked image.  Default
          is 85.

        """
        # look for the specified watermark by name.  If it's not there, go no
        # further
        try:
            watermark = Watermark.objects.get(name=name, is_active=True)
        except Watermark.DoesNotExist:
            logger.error('Watermark "%s" does not exist... Bailing out.' %
                         name)
            return url

        # make sure URL is a string
        url = smart_str(url)

        basedir = '%s/watermarked/' % os.path.dirname(url)
        original_basename, ext = os.path.splitext(os.path.basename(url))

        # open the target image file along with the watermark image
        target = Image.open(self._get_filesystem_path(url))
        mark = Image.open(watermark.image.path)

        # determine the actual value that the parameters provided will render
        random_position = bool(position is None
                               or str(position).lower() == 'r')
        scale = utils.determine_scale(scale, target, mark)
        mark = mark.resize(scale, resample=Image.ANTIALIAS)
        rotation = utils.determine_rotation(rotation, mark)
        pos = utils.determine_position(position, target, mark)

        # see if we need to create only one randomly positioned watermarked
        # image
        if not random_position or (not random_position_once
                                   and random_position):
            logger.debug('Generating random position for watermark each time')
            position = pos
        else:
            logger.debug('Random positioning watermark once')

        params = {
            'position': position,
            'opacity': opacity,
            'scale': scale,
            'tile': tile,
            'greyscale': greyscale,
            'rotation': rotation,
            'original_basename': original_basename,
            'ext': ext,
            'quality': quality,
            'watermark': watermark.id,
            'left': pos[0],
            'top': pos[1],
            # 'fstat':       os.stat(self._get_filesystem_path(url)),
        }
        logger.debug('Params: %s' % params)

        fname = self.generate_filename(mark, **params)
        url_path = self.get_url_path(basedir, original_basename, ext, fname,
                                     obscure)
        fpath = self._get_filesystem_path(url_path)

        logger.debug('Watermark name: %s; URL: %s; Path: %s' % (
            fname,
            url_path,
            fpath,
        ))

        # see if the image already exists on the filesystem. If it does, use it.
        if os.access(fpath, os.R_OK):
            # see if the ``Watermark`` object was modified since the
            # file was created
            modified = make_aware(
                datetime.fromtimestamp(os.path.getmtime(fpath)),
                get_default_timezone())

            # only return the old file if things appear to be the same
            if modified >= watermark.date_updated:
                logger.info(
                    'Watermark exists and has not changed. Bailing out.')
                return url_path

        # make sure the position is in our params for the watermark
        params['position'] = pos

        self.create_watermark(target, mark, fpath, **params)

        # send back the URL to the new, watermarked image
        return url_path