def __init__(
self,
xknx: XKNX,
name: str,
group_address_operation_mode: GroupAddressesType | None = None,
group_address_operation_mode_state: GroupAddressesType | None = None,
group_address_operation_mode_protection: GroupAddressesType | None = None,
group_address_operation_mode_night: GroupAddressesType | None = None,
group_address_operation_mode_comfort: GroupAddressesType | None = None,
group_address_operation_mode_standby: GroupAddressesType | None = None,
group_address_controller_status: GroupAddressesType | None = None,
group_address_controller_status_state: GroupAddressesType | None = None,
group_address_controller_mode: GroupAddressesType | None = None,
group_address_controller_mode_state: GroupAddressesType | None = None,
group_address_heat_cool: GroupAddressesType | None = None,
group_address_heat_cool_state: GroupAddressesType | None = None,
sync_state: bool | int | float | str = True,
operation_modes: list[str | HVACOperationMode] | None = None,
controller_modes: list[str | HVACControllerMode] | None = None,
device_updated_cb: DeviceCallbackType | None = None,
):
"""Initialize ClimateMode class."""
super().__init__(xknx, name, device_updated_cb)
self.remote_value_operation_mode = RemoteValueOperationMode(
xknx,
group_address=group_address_operation_mode,
group_address_state=group_address_operation_mode_state,
sync_state=sync_state,
device_name=name,
feature_name="Operation mode",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.HVAC_MODE,
after_update_cb=None,
)
self.remote_value_controller_mode = RemoteValueControllerMode(
xknx,
group_address=group_address_controller_mode,
group_address_state=group_address_controller_mode_state,
sync_state=sync_state,
device_name=name,
feature_name="Controller mode",
after_update_cb=None,
)
self.remote_value_controller_status = RemoteValueOperationMode(
xknx,
group_address=group_address_controller_status,
group_address_state=group_address_controller_status_state,
sync_state=sync_state,
device_name=name,
feature_name="Controller status",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.CONTROLLER_STATUS,
after_update_cb=None,
)
self.remote_value_operation_mode_comfort = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_comfort,
group_address_state=group_address_operation_mode_comfort,
sync_state=sync_state,
device_name=name,
feature_name="Operation mode Comfort",
operation_mode=HVACOperationMode.COMFORT,
after_update_cb=None,
)
self.remote_value_operation_mode_standby = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_standby,
group_address_state=group_address_operation_mode_standby,
sync_state=sync_state,
device_name=name,
feature_name="Operation mode Standby",
operation_mode=HVACOperationMode.STANDBY,
after_update_cb=None,
)
self.remote_value_operation_mode_night = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_night,
group_address_state=group_address_operation_mode_night,
sync_state=sync_state,
device_name=name,
feature_name="Operation mode Night",
operation_mode=HVACOperationMode.NIGHT,
after_update_cb=None,
)
self.remote_value_operation_mode_protection = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_protection,
group_address_state=group_address_operation_mode_protection,
sync_state=sync_state,
device_name=name,
feature_name="Operation mode Protection",
operation_mode=HVACOperationMode.FROST_PROTECTION,
after_update_cb=None,
)
self.remote_value_heat_cool = RemoteValueBinaryHeatCool(
xknx,
group_address=group_address_heat_cool,
group_address_state=group_address_heat_cool_state,
sync_state=sync_state,
device_name=name,
feature_name="Heat/Cool",
controller_mode=HVACControllerMode.HEAT,
after_update_cb=None,
)
self.operation_mode = HVACOperationMode.STANDBY
self.controller_mode = HVACControllerMode.HEAT
self._operation_modes: list[HVACOperationMode] = []
if operation_modes is None:
self._operation_modes = self.gather_operation_modes()
else:
for op_mode in operation_modes:
if isinstance(op_mode, str):
self._operation_modes.append(HVACOperationMode(op_mode))
elif isinstance(op_mode, HVACOperationMode):
self._operation_modes.append(op_mode)
self._controller_modes: list[HVACControllerMode] = []
if controller_modes is None:
self._controller_modes = self.gather_controller_modes()
else:
for ct_mode in controller_modes:
if isinstance(ct_mode, str):
self._controller_modes.append(HVACControllerMode(ct_mode))
elif isinstance(ct_mode, HVACControllerMode):
self._controller_modes.append(ct_mode)
self.supports_operation_mode = any(
operation_mode.initialized
for operation_mode in self._iter_operation_remote_values()
)
self.supports_controller_mode = any(
controller_mode.initialized
for controller_mode in self._iter_controller_remote_values()
)
self._use_binary_operation_modes = any(
operation_mode.initialized
for operation_mode in self._iter_binary_operation_modes()
)
def __init__(
self,
xknx: "XKNX",
name: str,
group_address_operation_mode: Optional["GroupAddressableType"] = None,
group_address_operation_mode_state: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_protection: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_night: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_comfort: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_standby: Optional[
"GroupAddressableType"] = None,
group_address_controller_status: Optional[
"GroupAddressableType"] = None,
group_address_controller_status_state: Optional[
"GroupAddressableType"] = None,
group_address_controller_mode: Optional["GroupAddressableType"] = None,
group_address_controller_mode_state: Optional[
"GroupAddressableType"] = None,
group_address_heat_cool: Optional["GroupAddressableType"] = None,
group_address_heat_cool_state: Optional["GroupAddressableType"] = None,
operation_modes: Optional[List[Union[str, HVACOperationMode]]] = None,
controller_modes: Optional[List[Union[str,
HVACControllerMode]]] = None,
device_updated_cb: Optional[DeviceCallbackType] = None,
):
"""Initialize ClimateMode class."""
# pylint: disable=too-many-arguments, too-many-locals, too-many-branches, too-many-statements
super().__init__(xknx, name, device_updated_cb)
self.remote_value_operation_mode = RemoteValueOperationMode(
xknx,
group_address=group_address_operation_mode,
group_address_state=group_address_operation_mode_state,
sync_state=True,
device_name=name,
feature_name="Operation mode",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.
HVAC_MODE,
after_update_cb=None,
)
self.remote_value_controller_mode = RemoteValueControllerMode(
xknx,
group_address=group_address_controller_mode,
group_address_state=group_address_controller_mode_state,
sync_state=True,
device_name=name,
feature_name="Controller mode",
after_update_cb=None,
)
self.remote_value_controller_status = RemoteValueOperationMode(
xknx,
group_address=group_address_controller_status,
group_address_state=group_address_controller_status_state,
sync_state=True,
device_name=name,
feature_name="Controller status",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.
CONTROLLER_STATUS,
after_update_cb=None,
)
self.remote_value_operation_mode_comfort = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_comfort,
group_address_state=group_address_operation_mode_comfort,
sync_state=True,
device_name=name,
feature_name="Operation mode Comfort",
operation_mode=HVACOperationMode.COMFORT,
after_update_cb=None,
)
self.remote_value_operation_mode_standby = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_standby,
group_address_state=group_address_operation_mode_standby,
sync_state=True,
device_name=name,
feature_name="Operation mode Standby",
operation_mode=HVACOperationMode.STANDBY,
after_update_cb=None,
)
self.remote_value_operation_mode_night = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_night,
group_address_state=group_address_operation_mode_night,
sync_state=True,
device_name=name,
feature_name="Operation mode Night",
operation_mode=HVACOperationMode.NIGHT,
after_update_cb=None,
)
self.remote_value_operation_mode_protection = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_protection,
group_address_state=group_address_operation_mode_protection,
sync_state=True,
device_name=name,
feature_name="Operation mode Protection",
operation_mode=HVACOperationMode.FROST_PROTECTION,
after_update_cb=None,
)
self.remote_value_heat_cool = RemoteValueBinaryHeatCool(
xknx,
group_address=group_address_heat_cool,
group_address_state=group_address_heat_cool_state,
sync_state=True,
device_name=name,
feature_name="Heat/Cool",
controller_mode=HVACControllerMode.HEAT,
after_update_cb=None,
)
self.operation_mode = HVACOperationMode.STANDBY
self.controller_mode = HVACControllerMode.HEAT
self._operation_modes: List[HVACOperationMode] = []
if operation_modes is None:
self._operation_modes = self.gather_operation_modes()
else:
for op_mode in operation_modes:
if isinstance(op_mode, str):
self._operation_modes.append(HVACOperationMode(op_mode))
elif isinstance(op_mode, HVACOperationMode):
self._operation_modes.append(op_mode)
self._controller_modes: List[HVACControllerMode] = []
if controller_modes is None:
self._controller_modes = self.gather_controller_modes()
else:
for ct_mode in controller_modes:
if isinstance(ct_mode, str):
self._controller_modes.append(HVACControllerMode(ct_mode))
elif isinstance(ct_mode, HVACControllerMode):
self._controller_modes.append(ct_mode)
self.supports_operation_mode = any(
operation_mode.initialized
for operation_mode in self._iter_byte_operation_modes()) or any(
operation_mode.initialized
for operation_mode in self._iter_binary_operation_modes())
self.supports_controller_mode = any(
operation_mode.initialized
for operation_mode in self._iter_controller_remote_values())
self._use_binary_operation_modes = any(
operation_mode.initialized
for operation_mode in self._iter_binary_operation_modes())
class ClimateMode(Device):
"""Class for managing the climate mode."""
def __init__(
self,
xknx: XKNX,
name: str,
group_address_operation_mode: GroupAddressesType | None = None,
group_address_operation_mode_state: GroupAddressesType | None = None,
group_address_operation_mode_protection: GroupAddressesType
| None = None,
group_address_operation_mode_night: GroupAddressesType | None = None,
group_address_operation_mode_comfort: GroupAddressesType | None = None,
group_address_operation_mode_standby: GroupAddressesType | None = None,
group_address_controller_status: GroupAddressesType | None = None,
group_address_controller_status_state: GroupAddressesType
| None = None,
group_address_controller_mode: GroupAddressesType | None = None,
group_address_controller_mode_state: GroupAddressesType | None = None,
group_address_heat_cool: GroupAddressesType | None = None,
group_address_heat_cool_state: GroupAddressesType | None = None,
operation_modes: list[str | HVACOperationMode] | None = None,
controller_modes: list[str | HVACControllerMode] | None = None,
device_updated_cb: DeviceCallbackType | None = None,
):
"""Initialize ClimateMode class."""
super().__init__(xknx, name, device_updated_cb)
self.remote_value_operation_mode = RemoteValueOperationMode(
xknx,
group_address=group_address_operation_mode,
group_address_state=group_address_operation_mode_state,
sync_state=True,
device_name=name,
feature_name="Operation mode",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.
HVAC_MODE,
after_update_cb=None,
)
self.remote_value_controller_mode = RemoteValueControllerMode(
xknx,
group_address=group_address_controller_mode,
group_address_state=group_address_controller_mode_state,
sync_state=True,
device_name=name,
feature_name="Controller mode",
after_update_cb=None,
)
self.remote_value_controller_status = RemoteValueOperationMode(
xknx,
group_address=group_address_controller_status,
group_address_state=group_address_controller_status_state,
sync_state=True,
device_name=name,
feature_name="Controller status",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.
CONTROLLER_STATUS,
after_update_cb=None,
)
self.remote_value_operation_mode_comfort = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_comfort,
group_address_state=group_address_operation_mode_comfort,
sync_state=True,
device_name=name,
feature_name="Operation mode Comfort",
operation_mode=HVACOperationMode.COMFORT,
after_update_cb=None,
)
self.remote_value_operation_mode_standby = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_standby,
group_address_state=group_address_operation_mode_standby,
sync_state=True,
device_name=name,
feature_name="Operation mode Standby",
operation_mode=HVACOperationMode.STANDBY,
after_update_cb=None,
)
self.remote_value_operation_mode_night = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_night,
group_address_state=group_address_operation_mode_night,
sync_state=True,
device_name=name,
feature_name="Operation mode Night",
operation_mode=HVACOperationMode.NIGHT,
after_update_cb=None,
)
self.remote_value_operation_mode_protection = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_protection,
group_address_state=group_address_operation_mode_protection,
sync_state=True,
device_name=name,
feature_name="Operation mode Protection",
operation_mode=HVACOperationMode.FROST_PROTECTION,
after_update_cb=None,
)
self.remote_value_heat_cool = RemoteValueBinaryHeatCool(
xknx,
group_address=group_address_heat_cool,
group_address_state=group_address_heat_cool_state,
sync_state=True,
device_name=name,
feature_name="Heat/Cool",
controller_mode=HVACControllerMode.HEAT,
after_update_cb=None,
)
self.operation_mode = HVACOperationMode.STANDBY
self.controller_mode = HVACControllerMode.HEAT
self._operation_modes: list[HVACOperationMode] = []
if operation_modes is None:
self._operation_modes = self.gather_operation_modes()
else:
for op_mode in operation_modes:
if isinstance(op_mode, str):
self._operation_modes.append(HVACOperationMode(op_mode))
elif isinstance(op_mode, HVACOperationMode):
self._operation_modes.append(op_mode)
self._controller_modes: list[HVACControllerMode] = []
if controller_modes is None:
self._controller_modes = self.gather_controller_modes()
else:
for ct_mode in controller_modes:
if isinstance(ct_mode, str):
self._controller_modes.append(HVACControllerMode(ct_mode))
elif isinstance(ct_mode, HVACControllerMode):
self._controller_modes.append(ct_mode)
self.supports_operation_mode = any(
operation_mode.initialized
for operation_mode in self._iter_operation_remote_values())
self.supports_controller_mode = any(
controller_mode.initialized
for controller_mode in self._iter_controller_remote_values())
self._use_binary_operation_modes = any(
operation_mode.initialized
for operation_mode in self._iter_binary_operation_modes())
def _iter_remote_values(self, ) -> Iterator[RemoteValue[Any, Any]]:
"""Iterate climate mode RemoteValue classes."""
return chain(
self._iter_operation_remote_values(),
self._iter_controller_remote_values(),
)
def _iter_operation_remote_values(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACOperationMode]]:
return chain(
self._iter_binary_operation_modes(),
self._iter_byte_operation_modes(),
)
def _iter_binary_operation_modes(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACOperationMode]]:
"""Iterate DPT 1 binary operation modes."""
yield from (
self.remote_value_operation_mode_comfort,
self.remote_value_operation_mode_night,
self.remote_value_operation_mode_protection,
self.remote_value_operation_mode_standby,
)
def _iter_byte_operation_modes(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACOperationMode]]:
"""Iterate normal DPT 20.102 operation mode remote values."""
yield from (
self.remote_value_operation_mode,
self.remote_value_controller_status,
)
def _iter_controller_remote_values(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACControllerMode]]:
"""Iterate DPT 20.105 controller remote values."""
yield self.remote_value_controller_mode
yield self.remote_value_heat_cool
async def _set_internal_operation_mode(
self, operation_mode: HVACOperationMode) -> None:
"""Set internal value of operation mode. Call hooks if operation mode was changed."""
if operation_mode != self.operation_mode:
self.operation_mode = operation_mode
await self.after_update()
async def _set_internal_controller_mode(
self, controller_mode: HVACControllerMode) -> None:
"""Set internal value of controller mode. Call hooks if controller mode was changed."""
if controller_mode != self.controller_mode:
self.controller_mode = controller_mode
await self.after_update()
async def set_operation_mode(self,
operation_mode: HVACOperationMode) -> None:
"""Set the operation mode of a thermostat. Send new operation_mode to BUS and update internal state."""
if (not self.supports_operation_mode
or operation_mode not in self._operation_modes):
raise DeviceIllegalValue("operation (preset) mode not supported",
str(operation_mode))
rv_operation: RemoteValueClimateModeBase[Any, HVACOperationMode]
for rv_operation in self._iter_operation_remote_values():
if (rv_operation.writable and operation_mode
in rv_operation.supported_operation_modes()):
await rv_operation.set(operation_mode)
await self._set_internal_operation_mode(operation_mode)
async def set_controller_mode(self,
controller_mode: HVACControllerMode) -> None:
"""Set the controller mode of a thermostat. Send new controller mode to the bus and update internal state."""
if (not self.supports_controller_mode
or controller_mode not in self._controller_modes):
raise DeviceIllegalValue("controller (HVAC) mode not supported",
str(controller_mode))
rv_controller: RemoteValueClimateModeBase[Any, HVACControllerMode]
for rv_controller in self._iter_controller_remote_values():
if (rv_controller.writable and controller_mode
in rv_controller.supported_operation_modes()):
await rv_controller.set(controller_mode)
await self._set_internal_controller_mode(controller_mode)
@property
def operation_modes(self) -> list[HVACOperationMode]:
"""Return all configured operation modes."""
if not self.supports_operation_mode:
return []
return self._operation_modes
@property
def controller_modes(self) -> list[HVACControllerMode]:
"""Return all configured controller modes."""
if not self.supports_controller_mode:
return []
return self._controller_modes
def gather_operation_modes(self) -> list[HVACOperationMode]:
"""Gather operation modes from RemoteValues."""
operation_modes: list[HVACOperationMode] = []
for rv_operation in self._iter_operation_remote_values():
if rv_operation.writable:
operation_modes.extend(
rv_operation.supported_operation_modes())
# remove duplicates
return list(set(operation_modes))
def gather_controller_modes(self) -> list[HVACControllerMode]:
"""Gather controller modes from RemoteValues."""
controller_modes: list[HVACControllerMode] = []
for rv_controller in self._iter_controller_remote_values():
if rv_controller.writable:
controller_modes.extend(
rv_controller.supported_operation_modes())
# remove duplicates
return list(set(controller_modes))
async def process_group_write(self, telegram: "Telegram") -> None:
"""Process incoming and outgoing GROUP WRITE telegram."""
if self.supports_operation_mode:
for rv_mode in self._iter_operation_remote_values():
if await rv_mode.process(telegram):
# ignore inactive RemoteValueBinaryOperationMode
if rv_mode.value:
await self._set_internal_operation_mode(rv_mode.value)
return
if self.supports_controller_mode:
for rv_controller in self._iter_controller_remote_values():
if await rv_controller.process(telegram):
if rv_controller.value is not None:
await self._set_internal_controller_mode(
rv_controller.value)
return
def __str__(self) -> str:
"""Return object as readable string."""
return ('<ClimateMode name="{}" '
"operation_mode={} "
"controller_mode={} "
"controller_status={} "
"/>".format(
self.name,
self.remote_value_operation_mode.group_addr_str(),
self.remote_value_controller_mode.group_addr_str(),
self.remote_value_controller_status.group_addr_str(),
))
class ClimateMode(Device):
"""Class for managing the climate mode."""
# pylint: disable=invalid-name,too-many-instance-attributes
def __init__(
self,
xknx: "XKNX",
name: str,
group_address_operation_mode: Optional["GroupAddressableType"] = None,
group_address_operation_mode_state: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_protection: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_night: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_comfort: Optional[
"GroupAddressableType"] = None,
group_address_operation_mode_standby: Optional[
"GroupAddressableType"] = None,
group_address_controller_status: Optional[
"GroupAddressableType"] = None,
group_address_controller_status_state: Optional[
"GroupAddressableType"] = None,
group_address_controller_mode: Optional["GroupAddressableType"] = None,
group_address_controller_mode_state: Optional[
"GroupAddressableType"] = None,
group_address_heat_cool: Optional["GroupAddressableType"] = None,
group_address_heat_cool_state: Optional["GroupAddressableType"] = None,
operation_modes: Optional[List[Union[str, HVACOperationMode]]] = None,
controller_modes: Optional[List[Union[str,
HVACControllerMode]]] = None,
device_updated_cb: Optional[DeviceCallbackType] = None,
):
"""Initialize ClimateMode class."""
# pylint: disable=too-many-arguments, too-many-locals, too-many-branches, too-many-statements
super().__init__(xknx, name, device_updated_cb)
self.remote_value_operation_mode = RemoteValueOperationMode(
xknx,
group_address=group_address_operation_mode,
group_address_state=group_address_operation_mode_state,
sync_state=True,
device_name=name,
feature_name="Operation mode",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.
HVAC_MODE,
after_update_cb=None,
)
self.remote_value_controller_mode = RemoteValueControllerMode(
xknx,
group_address=group_address_controller_mode,
group_address_state=group_address_controller_mode_state,
sync_state=True,
device_name=name,
feature_name="Controller mode",
after_update_cb=None,
)
self.remote_value_controller_status = RemoteValueOperationMode(
xknx,
group_address=group_address_controller_status,
group_address_state=group_address_controller_status_state,
sync_state=True,
device_name=name,
feature_name="Controller status",
climate_mode_type=RemoteValueOperationMode.ClimateModeType.
CONTROLLER_STATUS,
after_update_cb=None,
)
self.remote_value_operation_mode_comfort = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_comfort,
group_address_state=group_address_operation_mode_comfort,
sync_state=True,
device_name=name,
feature_name="Operation mode Comfort",
operation_mode=HVACOperationMode.COMFORT,
after_update_cb=None,
)
self.remote_value_operation_mode_standby = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_standby,
group_address_state=group_address_operation_mode_standby,
sync_state=True,
device_name=name,
feature_name="Operation mode Standby",
operation_mode=HVACOperationMode.STANDBY,
after_update_cb=None,
)
self.remote_value_operation_mode_night = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_night,
group_address_state=group_address_operation_mode_night,
sync_state=True,
device_name=name,
feature_name="Operation mode Night",
operation_mode=HVACOperationMode.NIGHT,
after_update_cb=None,
)
self.remote_value_operation_mode_protection = RemoteValueBinaryOperationMode(
xknx,
group_address=group_address_operation_mode_protection,
group_address_state=group_address_operation_mode_protection,
sync_state=True,
device_name=name,
feature_name="Operation mode Protection",
operation_mode=HVACOperationMode.FROST_PROTECTION,
after_update_cb=None,
)
self.remote_value_heat_cool = RemoteValueBinaryHeatCool(
xknx,
group_address=group_address_heat_cool,
group_address_state=group_address_heat_cool_state,
sync_state=True,
device_name=name,
feature_name="Heat/Cool",
controller_mode=HVACControllerMode.HEAT,
after_update_cb=None,
)
self.operation_mode = HVACOperationMode.STANDBY
self.controller_mode = HVACControllerMode.HEAT
self._operation_modes: List[HVACOperationMode] = []
if operation_modes is None:
self._operation_modes = self.gather_operation_modes()
else:
for op_mode in operation_modes:
if isinstance(op_mode, str):
self._operation_modes.append(HVACOperationMode(op_mode))
elif isinstance(op_mode, HVACOperationMode):
self._operation_modes.append(op_mode)
self._controller_modes: List[HVACControllerMode] = []
if controller_modes is None:
self._controller_modes = self.gather_controller_modes()
else:
for ct_mode in controller_modes:
if isinstance(ct_mode, str):
self._controller_modes.append(HVACControllerMode(ct_mode))
elif isinstance(ct_mode, HVACControllerMode):
self._controller_modes.append(ct_mode)
self.supports_operation_mode = any(
operation_mode.initialized
for operation_mode in self._iter_byte_operation_modes()) or any(
operation_mode.initialized
for operation_mode in self._iter_binary_operation_modes())
self.supports_controller_mode = any(
operation_mode.initialized
for operation_mode in self._iter_controller_remote_values())
self._use_binary_operation_modes = any(
operation_mode.initialized
for operation_mode in self._iter_binary_operation_modes())
@classmethod
def from_config(cls, xknx: "XKNX", name: str,
config: Any) -> "ClimateMode":
"""Initialize object from configuration structure."""
# pylint: disable=too-many-locals
group_address_operation_mode = config.get(
"group_address_operation_mode")
group_address_operation_mode_state = config.get(
"group_address_operation_mode_state")
group_address_operation_mode_protection = config.get(
"group_address_operation_mode_protection")
group_address_operation_mode_night = config.get(
"group_address_operation_mode_night")
group_address_operation_mode_comfort = config.get(
"group_address_operation_mode_comfort")
group_address_operation_mode_standby = config.get(
"group_address_operation_mode_standby")
group_address_controller_status = config.get(
"group_address_controller_status")
group_address_controller_status_state = config.get(
"group_address_controller_status_state")
group_address_controller_mode = config.get(
"group_address_controller_mode")
group_address_controller_mode_state = config.get(
"group_address_controller_mode_state")
group_address_heat_cool = config.get("group_address_heat_cool")
group_address_heat_cool_state = config.get(
"group_address_heat_cool_state")
return cls(
xknx,
name,
group_address_operation_mode=group_address_operation_mode,
group_address_operation_mode_state=
group_address_operation_mode_state,
group_address_operation_mode_protection=
group_address_operation_mode_protection,
group_address_operation_mode_night=
group_address_operation_mode_night,
group_address_operation_mode_comfort=
group_address_operation_mode_comfort,
group_address_operation_mode_standby=
group_address_operation_mode_standby,
group_address_controller_status=group_address_controller_status,
group_address_controller_status_state=
group_address_controller_status_state,
group_address_controller_mode=group_address_controller_mode,
group_address_controller_mode_state=
group_address_controller_mode_state,
group_address_heat_cool=group_address_heat_cool,
group_address_heat_cool_state=group_address_heat_cool_state,
)
def _iter_remote_values(self, ) -> Iterator["RemoteValue[Any]"]:
"""Iterate climate mode RemoteValue classes."""
return chain(
self._iter_byte_operation_modes(),
self._iter_controller_remote_values(),
self._iter_binary_operation_modes(),
)
def _iter_byte_operation_modes(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACOperationMode]]:
"""Iterate normal DPT 20.102 operation mode remote values."""
yield from (
self.remote_value_operation_mode,
self.remote_value_controller_status,
)
def _iter_controller_remote_values(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACControllerMode]]:
"""Iterate DPT 20.105 controller remote values."""
yield self.remote_value_controller_mode
yield self.remote_value_heat_cool
def _iter_binary_operation_modes(
self,
) -> Iterator[RemoteValueClimateModeBase[Any, HVACOperationMode]]:
"""Iterate DPT 1 binary operation modes."""
yield from (
self.remote_value_operation_mode_comfort,
self.remote_value_operation_mode_night,
self.remote_value_operation_mode_protection,
self.remote_value_operation_mode_standby,
)
async def _set_internal_operation_mode(
self, operation_mode: HVACOperationMode) -> None:
"""Set internal value of operation mode. Call hooks if operation mode was changed."""
if operation_mode != self.operation_mode:
self.operation_mode = operation_mode
await self.after_update()
async def _set_internal_controller_mode(
self, controller_mode: HVACControllerMode) -> None:
"""Set internal value of controller mode. Call hooks if controller mode was changed."""
if controller_mode != self.controller_mode:
self.controller_mode = controller_mode
await self.after_update()
async def set_operation_mode(self,
operation_mode: HVACOperationMode) -> None:
"""Set the operation mode of a thermostat. Send new operation_mode to BUS and update internal state."""
if (not self.supports_operation_mode
or operation_mode not in self._operation_modes):
raise DeviceIllegalValue("operation (preset) mode not supported",
str(operation_mode))
rv: RemoteValueClimateModeBase[Any, HVACOperationMode]
for rv in chain(self._iter_byte_operation_modes(),
self._iter_binary_operation_modes()):
if rv.writable and operation_mode in rv.supported_operation_modes(
):
await rv.set(operation_mode)
await self._set_internal_operation_mode(operation_mode)
async def set_controller_mode(self,
controller_mode: HVACControllerMode) -> None:
"""Set the controller mode of a thermostat. Send new controller mode to the bus and update internal state."""
if (not self.supports_controller_mode
or controller_mode not in self._controller_modes):
raise DeviceIllegalValue("controller (HVAC) mode not supported",
str(controller_mode))
rv: RemoteValueClimateModeBase[Any, HVACControllerMode]
for rv in self._iter_controller_remote_values():
if rv.writable and controller_mode in rv.supported_operation_modes(
):
await rv.set(controller_mode)
await self._set_internal_controller_mode(controller_mode)
@property
def operation_modes(self) -> List[HVACOperationMode]:
"""Return all configured operation modes."""
if not self.supports_operation_mode:
return []
return self._operation_modes
@property
def controller_modes(self) -> List[HVACControllerMode]:
"""Return all configured controller modes."""
if not self.supports_controller_mode:
return []
return self._controller_modes
def gather_operation_modes(self) -> List[HVACOperationMode]:
"""Gather operation modes from RemoteValues."""
operation_modes: List[HVACOperationMode] = []
for rv in chain(self._iter_binary_operation_modes(),
self._iter_byte_operation_modes()):
if rv.writable:
operation_modes.extend(rv.supported_operation_modes())
# remove duplicates
return list(set(operation_modes))
def gather_controller_modes(self) -> List[HVACControllerMode]:
"""Gather controller modes from RemoteValues."""
controller_modes: List[HVACControllerMode] = []
for rv in self._iter_controller_remote_values():
if rv.writable:
controller_modes.extend(rv.supported_operation_modes())
# remove duplicates
return list(set(controller_modes))
async def process_group_write(self, telegram: "Telegram") -> None:
"""Process incoming and outgoing GROUP WRITE telegram."""
if self.supports_operation_mode:
for rv in self._iter_remote_values():
if await rv.process(telegram):
# ignore inactive RemoteValueBinaryOperationMode
if rv.value:
await self._set_internal_operation_mode(rv.value)
return
if self.supports_controller_mode:
for rv in self._iter_controller_remote_values():
if await rv.process(telegram):
await self._set_internal_controller_mode(rv.value)
return
def __str__(self) -> str:
"""Return object as readable string."""
return ('<ClimateMode name="{}" '
'operation_mode="{}" '
'controller_mode="{}" '
'controller_status="{}" '
"/>".format(
self.name,
self.remote_value_operation_mode.group_addr_str(),
self.remote_value_controller_mode.group_addr_str(),
self.remote_value_controller_status.group_addr_str(),
))