def __init__(self, *args):
QtGui.QWidget.__init__(self, None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"), self.slotChangePix)
if ctx.consts.lang == "tr":
self.ui.progress.setFormat("%%p")
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def __init__(self, *args):
QtGui.QWidget.__init__(self,None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"),self.slotChangePix)
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def __init__(self, *args):
QtGui.QWidget.__init__(self,None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
self.timerProgress = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"),self.slotChangePix)
QObject.connect(self.timerProgress, SIGNAL("timeout()"),self.slotUpdateprogress)
if ctx.consts.lang == "tr":
self.ui.progress.setFormat("%%p")
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
class Widget(QtGui.QWidget, ScreenWidget):
title = _('Installing system...')
desc = _('Installing takes approximately 20 minutes depending on your hardware...')
icon = "iconInstall"
help = _('''
<font size="+2">Installation started</font>
<font size="+1">
<p>
Pardus is now being installed on your hard disk.
</p>
<p>
The duration of this operation depends on the
capability and power of your system. Meanwhile,
you can enjoy some visual elements showing
the distinctive properties of Pardus, your
new operating system.
</p>
<p>
Have fun!
</p>
</font>
''')
def __init__(self, *args):
QtGui.QWidget.__init__(self,None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"),self.slotChangePix)
if ctx.consts.lang == "tr":
self.ui.progress.setFormat("%%p")
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def shown(self):
# Disable mouse handler
ctx.mainScreen.dontAskCmbAgain = True
ctx.mainScreen.themeShortCut.setEnabled(False)
# Thread object
global currentObject
currentObject = self
# start installer thread
ctx.debugger.log("PkgInstaller is creating...")
self.pkg_installer = PkgInstaller()
ctx.debugger.log("Calling PkgInstaller.start...")
self.pkg_installer.start()
ctx.yali.info.updateAndShow(_("Packages are being installed.."))
ctx.mainScreen.disableNext()
ctx.mainScreen.disableBack()
# start 30 seconds
self.timer.start(1000 * 30)
def customEvent(self, qevent):
# EventPisi
if qevent.eventType() == EventPisi:
p, event = qevent.data()
if event == pisi.ui.installing:
self.ui.info.setText(_("Installing: <b>%s</b><br>%s") % (p.name, p.summary))
ctx.debugger.log("Pisi : %s installing" % p.name)
self.cur += 1
self.ui.progress.setValue(self.cur)
elif event == pisi.ui.configuring:
self.ui.info.setText(_("Configuring package: <b>%s</b>") % p.name)
ctx.debugger.log("Pisi : %s configuring" % p.name)
self.cur += 1
self.ui.progress.setValue(self.cur)
# EventSetProgress
elif qevent.eventType() == EventSetProgress:
total = qevent.data()
self.ui.progress.setMaximum(total)
# EventPackageInstallFinished
elif qevent.eventType() == EventPackageInstallFinished:
self.packageInstallFinished()
# EventError
elif qevent.eventType() == EventError:
err = qevent.data()
self.installError(err)
# EventRetry
elif qevent.eventType() == EventRetry:
package = qevent.data()
self.timer.stop()
ctx.yali.retryAnswer = EjectAndRetryDialog(_("Warning"),
_("Package install failed : <b>%s</b>") % package,
_("Do you want to retry ?"))
self.timer.start(1000 * 30)
ctx.yali.waitCondition.wakeAll()
# EventAllFinished
elif qevent.eventType() == EventAllFinished:
self.finished()
def slotChangePix(self):
slide = self.iter_pics.next()
self.ui.pix.setPixmap(slide["pic"])
# FIXME: Don't show slide descriptions for now
#self.ui.desc.setText(slide["desc"])
def packageInstallFinished(self):
ctx.yali.fillFstab()
# Configure Pending...
# run baselayout's postinstall first
ctx.yali.info.updateAndShow(_("Creating baselayout for your system!"))
yali4.postinstall.initbaselayout()
# postscripts depend on 03locale...
yali4.localeutils.writeLocaleFromCmdline()
#Write InitramfsConf
yali4.postinstall.writeInitramfsConf()
# run dbus in chroot
yali4.sysutils.chrootDbus()
ctx.yali.info.updateMessage(_("Configuring packages.."))
# start configurator thread
self.pkg_configurator = PkgConfigurator()
self.pkg_configurator.start()
def execute(self):
# stop slide show
self.timer.stop()
return True
def finished(self):
if self.hasErrors:
return
ctx.yali.info.hide()
# trigger next screen. will activate execute()
ctx.mainScreen.slotNext()
def installError(self, e):
import yali4
import yali4.gui.runner
self.hasErrors = True
err_str = _('''An error during the installation of packages occured.
This is possibly a broken Pardus CD or CD-ROM drive.
Error:
%s
''') % str(e)
yali4.gui.runner.showException(yali4.exception_fatal, err_str)
class Widget(QtGui.QWidget, ScreenWidget):
title = _('Installing system...')
desc = _(
'Installing takes approximately 20 minutes depending on your hardware...'
)
icon = "iconInstall"
help = _('''
<font size="+2">Installation started</font>
<font size="+1">
<p>
Pardus is now being installed on your hard disk.
</p>
<p>
The duration of this operation depends on the
capability and power of your system. Meanwhile,
you can enjoy some visual elements showing
the distinctive properties of Pardus, your
new operating system.
</p>
<p>
Have fun!
</p>
</font>
''')
def __init__(self, *args):
QtGui.QWidget.__init__(self, None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"), self.slotChangePix)
if ctx.consts.lang == "tr":
self.ui.progress.setFormat("%%p")
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def shown(self):
# Disable mouse handler
ctx.mainScreen.dontAskCmbAgain = True
ctx.mainScreen.themeShortCut.setEnabled(False)
# Thread object
global currentObject
currentObject = self
# start installer thread
ctx.debugger.log("PkgInstaller is creating...")
self.pkg_installer = PkgInstaller()
ctx.debugger.log("Calling PkgInstaller.start...")
self.pkg_installer.start()
ctx.yali.info.updateAndShow(_("Packages are being installed.."))
ctx.mainScreen.disableNext()
ctx.mainScreen.disableBack()
# start 30 seconds
self.timer.start(1000 * 30)
def customEvent(self, qevent):
# EventPisi
if qevent.eventType() == EventPisi:
p, event = qevent.data()
if event == pisi.ui.installing:
self.ui.info.setText(
_("Installing: <b>%s</b><br>%s") % (p.name, p.summary))
ctx.debugger.log("Pisi : %s installing" % p.name)
self.cur += 1
self.ui.progress.setValue(self.cur)
elif event == pisi.ui.configuring:
self.ui.info.setText(
_("Configuring package: <b>%s</b>") % p.name)
ctx.debugger.log("Pisi : %s configuring" % p.name)
self.cur += 1
self.ui.progress.setValue(self.cur)
# EventSetProgress
elif qevent.eventType() == EventSetProgress:
total = qevent.data()
self.ui.progress.setMaximum(total)
# EventPackageInstallFinished
elif qevent.eventType() == EventPackageInstallFinished:
self.packageInstallFinished()
# EventError
elif qevent.eventType() == EventError:
err = qevent.data()
self.installError(err)
# EventRetry
elif qevent.eventType() == EventRetry:
package = qevent.data()
self.timer.stop()
ctx.yali.retryAnswer = EjectAndRetryDialog(
_("Warning"),
_("Package install failed : <b>%s</b>") % package,
_("Do you want to retry ?"))
self.timer.start(1000 * 30)
ctx.yali.waitCondition.wakeAll()
# EventAllFinished
elif qevent.eventType() == EventAllFinished:
self.finished()
def slotChangePix(self):
slide = self.iter_pics.next()
self.ui.pix.setPixmap(slide["pic"])
self.ui.desc.setText(slide["desc"])
def packageInstallFinished(self):
ctx.yali.fillFstab()
# Configure Pending...
# run baselayout's postinstall first
ctx.yali.info.updateAndShow(_("Creating baselayout for your system!"))
yali4.postinstall.initbaselayout()
# postscripts depend on 03locale...
yali4.localeutils.writeLocaleFromCmdline()
#Write InitramfsConf
yali4.postinstall.writeInitramfsConf()
# run dbus in chroot
yali4.sysutils.chrootDbus()
ctx.yali.info.updateMessage(_("Configuring packages.."))
# start configurator thread
self.pkg_configurator = PkgConfigurator()
self.pkg_configurator.start()
def execute(self):
# stop slide show
self.timer.stop()
return True
def finished(self):
if self.hasErrors:
return
ctx.yali.info.hide()
# trigger next screen. will activate execute()
ctx.mainScreen.slotNext()
def installError(self, e):
import yali4
import yali4.gui.runner
self.hasErrors = True
err_str = _('''An error during the installation of packages occured.
This is possibly a broken Pardus CD or CD-ROM drive.
Error:
%s
''') % str(e)
yali4.gui.runner.showException(yali4.exception_fatal, err_str)
class Widget(QtGui.QWidget, ScreenWidget):
title = _('Installing system..')
desc = _('Installing approximately 30 minutes depending on hardware..')
icon = "iconInstall"
help = _('''
<font size="+2">Installation started</font>
<font size="+1">
<p>
Pardus is now being installed on your hard disk.
</p>
<p>
The duration of this operation depends on the
capability and power of your system. Meanwhile,
you can enjoy some visual elements showing
the distinctive properties of Pardus, your
new operating system.
</p>
<p>
Have fun!
</p>
</font>
''')
def __init__(self, *args):
QtGui.QWidget.__init__(self,None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"),self.slotChangePix)
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def shown(self):
# start installer thread
ctx.debugger.log("PkgInstaller is creating...")
self.pkg_installer = PkgInstaller(self)
ctx.debugger.log("Calling PkgInstaller.start...")
self.pkg_installer.start()
ctx.mainScreen.disableNext()
ctx.mainScreen.disableBack()
# start 30 seconds
self.timer.start(1000 * 30)
def customEvent(self, qevent):
# EventPisi
if qevent.eventType() == EventPisi:
p, event = qevent.data()
if event == pisi.ui.installing:
self.ui.info.setText(_("Installing: %s<br>%s") % (p.name, p.summary))
ctx.debugger.log("customEvent :: %s installed" % p.name)
self.cur += 1
self.ui.progress.setValue(self.cur)
elif event == pisi.ui.configuring:
self.ui.info.setText(_("Configuring package: %s") % p.name)
ctx.debugger.log("customEvent :: %s configured" % p.name)
self.cur += 1
self.ui.progress.setValue(self.cur)
# EventSetProgress
elif qevent.eventType() == EventSetProgress:
total = qevent.data()
self.ui.progress.setMaximum(total)
# EventPackageInstallFinished
elif qevent.eventType() == EventPackageInstallFinished:
self.packageInstallFinished()
# EventError
elif qevent.eventType() == EventError:
err = qevent.data()
self.installError(err)
# EventAllFinished
elif qevent.eventType() == EventAllFinished:
self.finished()
def slotChangePix(self):
self.ui.pix.setPixmap(self.iter_pics.next())
def packageInstallFinished(self):
yali4.pisiiface.finalize()
self.cur = 0
# fill fstab
fstab = yali4.fstab.Fstab()
for req in ctx.partrequests:
req_type = req.requestType()
if req_type == request.mountRequestType:
p = req.partition()
pt = req.partitionType()
path = "LABEL=%s" % pt.filesystem.getLabel(p)
fs = pt.filesystem._name
mountpoint = pt.mountpoint
# TODO: consider merging mountoptions in filesystem.py
opts = ",".join([pt.filesystem.mountOptions(), pt.mountoptions])
e = yali4.fstab.FstabEntry(path, mountpoint, fs, opts)
fstab.insert(e)
elif req_type == request.swapFileRequestType:
path = "/" + ctx.consts.swap_file_name
mountpoint = "none"
fs = "swap"
opts = "sw"
e = yali4.fstab.FstabEntry(path, mountpoint, fs, opts)
fstab.insert(e)
fstab.close()
# Configure Pending...
# run baselayout's postinstall first
yali4.postinstall.initbaselayout()
# postscripts depend on 03locale...
yali4.localeutils.write_locale_from_cmdline()
# run dbus in chroot
yali4.sysutils.chroot_dbus()
self.ui.info.setText(_("Configuring packages for your system!"))
# start configurator thread
self.pkg_configurator = PkgConfigurator(self)
self.pkg_configurator.start()
def execute(self):
# stop slide show
self.timer.stop()
return True
def finished(self):
if self.hasErrors:
return
yali4.pisiiface.finalize()
# trigger next screen. will activate execute()
ctx.mainScreen.slotNext()
def installError(self, e):
#self.info.setText(str(e))
import yali4
import yali4.gui.runner
self.hasErrors = True
err_str = _('''An error during the installation of packages occured.
This is possibly a broken Pardus CD or CD-ROM drive.
Error:
%s
''') % str(e)
yali4.gui.runner.showException(yali4.exception_fatal, err_str)
class Widget(QtGui.QWidget, ScreenWidget):
title = _('Installing system...')
desc = _('Installing takes approximately 20 minutes depending on your hardware...')
icon = "iconInstall"
help = _('''
<font size="+2">Installation started</font>
<font size="+1">
<p>
Pardus is now being installed on your hard disk.
</p>
<p>
The duration of this operation depends on the
capability and power of your system. Meanwhile,
you can enjoy some visual elements showing
the distinctive properties of Pardus, your
new operating system.
</p>
<p>
Have fun!
</p>
</font>
''')
def __init__(self, *args):
QtGui.QWidget.__init__(self,None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
self.timerProgress = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"),self.slotChangePix)
QObject.connect(self.timerProgress, SIGNAL("timeout()"),self.slotUpdateprogress)
if ctx.consts.lang == "tr":
self.ui.progress.setFormat("%%p")
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def shown(self):
# Disable mouse handler
ctx.mainScreen.dontAskCmbAgain = True
ctx.mainScreen.themeShortCut.setEnabled(False)
# Thread object
global currentObject
currentObject = self
# start installer thread
ctx.debugger.log("LiveInstaller is creating...")
self.live_installer = LiveInstaller()
ctx.debugger.log("Calling LiveInstaller.start...")
self.live_installer.start()
ctx.yali.info.updateAndShow(_("Copying files..."))
ctx.mainScreen.disableNext()
ctx.mainScreen.disableBack()
# start 30 seconds
self.timer.start(1000 * 30)
def slotUpdateprogress(self):
current_size= int(yali4.sysutils.execWithCapture("du", ["-sc",consts.target_dir]).split()[-2])
ctx.debugger.log("Progress: %d / %d" %(current_size, self.total))
qevent = InstallEvent(QEvent.User, EventCopy)
qevent.setData(current_size)
objectSender(qevent)
if current_size >= self.total:
self.timerProgress.stop()
def customEvent(self, qevent):
# EventCopy
if qevent.eventType() == EventCopy:
progress = qevent.data()
self.ui.progress.setValue(progress)
ctx.debugger.log("LiveInstall: Copying files")
self.ui.info.setText(_("Copying files..."))
# EventSetProgress
elif qevent.eventType() == EventSetProgress:
total = qevent.data()
self.total = total
self.ui.progress.setMaximum(total)
ctx.debugger.log("Progress reporter is running.")
self.timerProgress.start(1000 * 5)
# EventPackageInstallFinished
elif qevent.eventType() == EventPackageInstallFinished:
self.packageInstallFinished()
# EventError
elif qevent.eventType() == EventError:
err = qevent.data()
self.installError(err)
# EventRetry
elif qevent.eventType() == EventRetry:
package = qevent.data()
self.timer.stop()
ctx.yali.retryAnswer = EjectAndRetryDialog(_("Warning"),
_("Package install failed : <b>%s</b>") % package,
_("Do you want to retry ?"))
self.timer.start(1000 * 30)
ctx.yali.waitCondition.wakeAll()
# EventAllFinished
elif qevent.eventType() == EventAllFinished:
self.finished()
def slotChangePix(self):
slide = self.iter_pics.next()
self.ui.pix.setPixmap(slide["pic"])
self.ui.desc.setText(slide["desc"])
def packageInstallFinished(self):
ctx.yali.fillFstab()
# Configure Pending...
# run baselayout's postinstall first
ctx.yali.info.updateAndShow(_("Creating baselayout for your system!"))
yali4.postinstall.initbaselayout()
# postscripts depend on 03locale...
yali4.localeutils.writeLocaleFromCmdline()
#Write InitramfsConf
yali4.postinstall.writeInitramfsConf()
# run dbus in chroot
yali4.sysutils.chrootDbus()
#Remove Autologin for default Live user pars
pars=yali4.users.User("pars")
pars.setAutoLogin(False)
#Remove autologin as root for virtual terminals
inittablive = os.path.join(consts.target_dir,"etc/inittab")
inittab = file(inittablive).read()
inittab = inittab.replace("--autologin root ","")
f = file(inittablive,"w")
f.write(inittab)
f.close()
ctx.yali.info.updateMessage(_("Configuring packages.."))
qevent = InstallEvent(QEvent.User, EventAllFinished)
objectSender(qevent)
def execute(self):
# stop slide show
self.timer.stop()
return True
def finished(self):
if self.hasErrors:
return
ctx.yali.info.hide()
# trigger next screen. will activate execute()
ctx.mainScreen.slotNext()
def installError(self, e):
import yali4
import yali4.gui.runner
self.hasErrors = True
err_str = _('''An error during the installation of packages occured.
This is possibly a broken Pardus CD or CD-ROM drive.
Error:
%s
''') % str(e)
yali4.gui.runner.showException(yali4.exception_fatal, err_str)
class Widget(QtGui.QWidget, ScreenWidget):
title = _('Installing system...')
desc = _(
'Installing takes approximately 20 minutes depending on your hardware...'
)
icon = "iconInstall"
help = _('''
<font size="+2">Installation started</font>
<font size="+1">
<p>
Pardus is now being installed on your hard disk.
</p>
<p>
The duration of this operation depends on the
capability and power of your system. Meanwhile,
you can enjoy some visual elements showing
the distinctive properties of Pardus, your
new operating system.
</p>
<p>
Have fun!
</p>
</font>
''')
def __init__(self, *args):
QtGui.QWidget.__init__(self, None)
self.ui = Ui_InstallWidget()
self.ui.setupUi(self)
self.timer = QTimer(self)
self.timerProgress = QTimer(self)
QObject.connect(self.timer, SIGNAL("timeout()"), self.slotChangePix)
QObject.connect(self.timerProgress, SIGNAL("timeout()"),
self.slotUpdateprogress)
if ctx.consts.lang == "tr":
self.ui.progress.setFormat("%%p")
self.iter_pics = iter_slide_pics()
# show first pic
self.slotChangePix()
self.total = 0
self.cur = 0
self.hasErrors = False
def shown(self):
# Disable mouse handler
ctx.mainScreen.dontAskCmbAgain = True
ctx.mainScreen.themeShortCut.setEnabled(False)
# Thread object
global currentObject
currentObject = self
# start installer thread
ctx.debugger.log("LiveInstaller is creating...")
self.live_installer = LiveInstaller()
ctx.debugger.log("Calling LiveInstaller.start...")
self.live_installer.start()
ctx.yali.info.updateAndShow(_("Copying files..."))
ctx.mainScreen.disableNext()
ctx.mainScreen.disableBack()
# start 30 seconds
self.timer.start(1000 * 30)
def slotUpdateprogress(self):
current_size = int(
yali4.sysutils.execWithCapture(
"du", ["-sc", consts.target_dir]).split()[-2])
ctx.debugger.log("Progress: %d / %d" % (current_size, self.total))
qevent = InstallEvent(QEvent.User, EventCopy)
qevent.setData(current_size)
objectSender(qevent)
if current_size >= self.total:
self.timerProgress.stop()
def customEvent(self, qevent):
# EventCopy
if qevent.eventType() == EventCopy:
progress = qevent.data()
self.ui.progress.setValue(progress)
ctx.debugger.log("LiveInstall: Copying files")
self.ui.info.setText(_("Copying files..."))
# EventSetProgress
elif qevent.eventType() == EventSetProgress:
total = qevent.data()
self.total = total
self.ui.progress.setMaximum(total)
ctx.debugger.log("Progress reporter is running.")
self.timerProgress.start(1000 * 5)
# EventPackageInstallFinished
elif qevent.eventType() == EventPackageInstallFinished:
self.packageInstallFinished()
# EventError
elif qevent.eventType() == EventError:
err = qevent.data()
self.installError(err)
# EventRetry
elif qevent.eventType() == EventRetry:
package = qevent.data()
self.timer.stop()
ctx.yali.retryAnswer = EjectAndRetryDialog(
_("Warning"),
_("Package install failed : <b>%s</b>") % package,
_("Do you want to retry ?"))
self.timer.start(1000 * 30)
ctx.yali.waitCondition.wakeAll()
# EventAllFinished
elif qevent.eventType() == EventAllFinished:
self.finished()
def slotChangePix(self):
slide = self.iter_pics.next()
self.ui.pix.setPixmap(slide["pic"])
self.ui.desc.setText(slide["desc"])
def packageInstallFinished(self):
ctx.yali.fillFstab()
# Configure Pending...
# run baselayout's postinstall first
ctx.yali.info.updateAndShow(_("Creating baselayout for your system!"))
yali4.postinstall.initbaselayout()
# postscripts depend on 03locale...
yali4.localeutils.writeLocaleFromCmdline()
#Write InitramfsConf
yali4.postinstall.writeInitramfsConf()
# run dbus in chroot
yali4.sysutils.chrootDbus()
#Remove Autologin for default Live user pars
pars = yali4.users.User("pars")
pars.setAutoLogin(False)
#Remove autologin as root for virtual terminals
inittablive = os.path.join(consts.target_dir, "etc/inittab")
inittab = file(inittablive).read()
inittab = inittab.replace("--autologin root ", "")
f = file(inittablive, "w")
f.write(inittab)
f.close()
ctx.yali.info.updateMessage(_("Configuring packages.."))
qevent = InstallEvent(QEvent.User, EventAllFinished)
objectSender(qevent)
def execute(self):
# stop slide show
self.timer.stop()
return True
def finished(self):
if self.hasErrors:
return
ctx.yali.info.hide()
# trigger next screen. will activate execute()
ctx.mainScreen.slotNext()
def installError(self, e):
import yali4
import yali4.gui.runner
self.hasErrors = True
err_str = _('''An error during the installation of packages occured.
This is possibly a broken Pardus CD or CD-ROM drive.
Error:
%s
''') % str(e)
yali4.gui.runner.showException(yali4.exception_fatal, err_str)