def run_tests(self,
test_labels,
extra_tests=None,
full_suite=False,
**kwargs):
# type: (List[str], Optional[List[TestCase]], bool, **Any) -> bool
self.setup_test_environment()
try:
suite = self.build_suite(test_labels, extra_tests)
except AttributeError:
traceback.print_exc()
print()
print(
" This is often caused by a test module/class/function that doesn't exist or "
)
print(
" import properly. You can usually debug in a `manage.py shell` via e.g. "
)
print(" import zerver.tests.test_messages")
print(
" from zerver.tests.test_messages import StreamMessagesTest"
)
print(" StreamMessagesTest.test_message_to_stream")
print()
sys.exit(1)
# We have to do the next line to avoid flaky scenarios where we
# run a single test and getting an SA connection causes data from
# a Django connection to be rolled back mid-test.
get_sqlalchemy_connection()
result = self.run_suite(suite)
self.teardown_test_environment()
failed = result.failed
if not failed:
write_instrumentation_reports(full_suite=full_suite)
return failed
def run_tests(self, test_labels, extra_tests=None,
full_suite=False, **kwargs):
# type: (List[str], Optional[List[TestCase]], bool, **Any) -> bool
self.setup_test_environment()
try:
suite = self.build_suite(test_labels, extra_tests)
except AttributeError:
traceback.print_exc()
print()
print(" This is often caused by a test module/class/function that doesn't exist or ")
print(" import properly. You can usually debug in a `manage.py shell` via e.g. ")
print(" import zerver.tests.test_messages")
print(" from zerver.tests.test_messages import StreamMessagesTest")
print(" StreamMessagesTest.test_message_to_stream")
print()
sys.exit(1)
# We have to do the next line to avoid flaky scenarios where we
# run a single test and getting an SA connection causes data from
# a Django connection to be rolled back mid-test.
get_sqlalchemy_connection()
result = self.run_suite(suite)
self.teardown_test_environment()
failed = self.suite_result(suite, result)
if not failed:
write_instrumentation_reports(full_suite=full_suite)
return failed
def run_tests(
self,
test_labels: List[str],
extra_tests: Optional[List[TestCase]] = None,
full_suite: bool = False,
include_webhooks: bool = False,
**kwargs: Any,
) -> Tuple[bool, List[str]]:
self.setup_test_environment()
try:
suite = self.build_suite(test_labels, extra_tests)
except AttributeError:
# We are likely to get here only when running tests in serial
# mode on Python 3.4 or lower.
# test_labels are always normalized to include the correct prefix.
# If we run the command with ./tools/test-backend test_alert_words,
# test_labels will be equal to ['zerver.tests.test_alert_words'].
for test_label in test_labels:
check_import_error(test_label)
# I think we won't reach this line under normal circumstances, but
# for some unforeseen scenario in which the AttributeError was not
# caused by an import error, let's re-raise the exception for
# debugging purposes.
raise
self.test_imports(test_labels, suite)
if self.parallel == 1:
# We are running in serial mode so create the databases here.
# For parallel mode, the databases are created in init_worker.
# We don't want to create and destroy DB in setup_test_environment
# because it will be called for both serial and parallel modes.
# However, at this point we know in which mode we would be running
# since that decision has already been made in build_suite().
#
# We pass a _worker_id, which in this code path is always 0
destroy_test_databases(_worker_id)
create_test_databases(_worker_id)
# We have to do the next line to avoid flaky scenarios where we
# run a single test and getting an SA connection causes data from
# a Django connection to be rolled back mid-test.
get_sqlalchemy_connection()
result = self.run_suite(suite)
self.teardown_test_environment()
failed = self.suite_result(suite, result)
if not failed:
write_instrumentation_reports(full_suite=full_suite,
include_webhooks=include_webhooks)
return failed, result.failed_tests
def run_tests(self,
test_labels,
extra_tests=None,
full_suite=False,
**kwargs):
# type: (List[str], Optional[List[TestCase]], bool, **Any) -> Tuple[bool, List[str]]
self.setup_test_environment()
try:
suite = self.build_suite(test_labels, extra_tests)
except AttributeError:
traceback.print_exc()
print()
print(
" This is often caused by a test module/class/function that doesn't exist or "
)
print(
" import properly. You can usually debug in a `manage.py shell` via e.g. "
)
print(" import zerver.tests.test_messages")
print(
" from zerver.tests.test_messages import StreamMessagesTest"
)
print(" StreamMessagesTest.test_message_to_stream")
print()
sys.exit(1)
if self.parallel == 1:
# We are running in serial mode so create the databases here.
# For parallel mode, the databases are created in init_worker.
# We don't want to create and destroy DB in setup_test_environment
# because it will be called for both serial and parallel modes.
# However, at this point we know in which mode we would be running
# since that decision has already been made in build_suite().
destroy_test_databases(self.database_id)
create_test_databases(self.database_id)
# We have to do the next line to avoid flaky scenarios where we
# run a single test and getting an SA connection causes data from
# a Django connection to be rolled back mid-test.
get_sqlalchemy_connection()
result = self.run_suite(suite)
self.teardown_test_environment()
failed = self.suite_result(suite, result)
if not failed:
write_instrumentation_reports(full_suite=full_suite)
return failed, result.failed_tests
def run_tests(self, test_labels: List[str],
extra_tests: Optional[List[TestCase]]=None,
full_suite: bool=False,
include_webhooks: bool=False,
**kwargs: Any) -> Tuple[bool, List[str]]:
self.setup_test_environment()
try:
suite = self.build_suite(test_labels, extra_tests)
except AttributeError:
# We are likely to get here only when running tests in serial
# mode on Python 3.4 or lower.
# test_labels are always normalized to include the correct prefix.
# If we run the command with ./tools/test-backend test_alert_words,
# test_labels will be equal to ['zerver.tests.test_alert_words'].
for test_label in test_labels:
check_import_error(test_label)
# I think we won't reach this line under normal circumstances, but
# for some unforeseen scenario in which the AttributeError was not
# caused by an import error, let's re-raise the exception for
# debugging purposes.
raise
self.test_imports(test_labels, suite)
if self.parallel == 1:
# We are running in serial mode so create the databases here.
# For parallel mode, the databases are created in init_worker.
# We don't want to create and destroy DB in setup_test_environment
# because it will be called for both serial and parallel modes.
# However, at this point we know in which mode we would be running
# since that decision has already been made in build_suite().
destroy_test_databases(self.database_id)
create_test_databases(self.database_id)
# We have to do the next line to avoid flaky scenarios where we
# run a single test and getting an SA connection causes data from
# a Django connection to be rolled back mid-test.
get_sqlalchemy_connection()
result = self.run_suite(suite)
self.teardown_test_environment()
failed = self.suite_result(suite, result)
if not failed:
write_instrumentation_reports(full_suite=full_suite, include_webhooks=include_webhooks)
return failed, result.failed_tests
def run_tests(self, test_labels, extra_tests=None,
full_suite=False, **kwargs):
# type: (List[str], Optional[List[TestCase]], bool, **Any) -> Tuple[bool, List[str]]
self.setup_test_environment()
try:
suite = self.build_suite(test_labels, extra_tests)
except AttributeError:
traceback.print_exc()
print()
print(" This is often caused by a test module/class/function that doesn't exist or ")
print(" import properly. You can usually debug in a `manage.py shell` via e.g. ")
print(" import zerver.tests.test_messages")
print(" from zerver.tests.test_messages import StreamMessagesTest")
print(" StreamMessagesTest.test_message_to_stream")
print()
sys.exit(1)
if self.parallel == 1:
# We are running in serial mode so create the databases here.
# For parallel mode, the databases are created in init_worker.
# We don't want to create and destroy DB in setup_test_environment
# because it will be called for both serial and parallel modes.
# However, at this point we know in which mode we would be running
# since that decision has already been made in build_suite().
destroy_test_databases(self.database_id)
create_test_databases(self.database_id)
# We have to do the next line to avoid flaky scenarios where we
# run a single test and getting an SA connection causes data from
# a Django connection to be rolled back mid-test.
get_sqlalchemy_connection()
result = self.run_suite(suite)
self.teardown_test_environment()
failed = self.suite_result(suite, result)
if not failed:
write_instrumentation_reports(full_suite=full_suite)
return failed, result.failed_tests
