def HDec(Unit):
CPD = "None"
CPD = TopCmds.GETPAR2("CPDPRG 2")
if CPD == "" or CPD == "None":
PWname = "PCPD 2"
PLname = "PL" + Unit + " 12"
PW = "5.0"
if Unit == "dB": PL = "1000."
if Unit == "W": PL = "0.0"
else:
PLname, PWname = CPDtools.CPDparse(CPD, "1H")
PLname = Format(PLname, Unit)
PWname = Format(PWname, "")
if PWname == "PCPD":
PWname = "PCPD 2"
PW = TopCmds.GETPAR(PWname)
PL = TopCmds.GETPAR(PLname)
#TopCmds.MSG(PWname+" "+PLname+" "+str(PW)+" "+str(PL))
return CPD, PWname, PW, PLname, PL
def HDec(units):
Stuff = []
p90H = float(TopCmds.GETPAR("P 3"))
ampH = float(TopCmds.GETPAR("PLdB 2"))
MaxB1H = 1000000. / 4. / p90H
CPD = TopCmds.GETPAR2("CPDPRG 2")
if CPD == "mlev" or CPD == "None":
TopCmds.XCMD("cpdprg2")
CPD = (TopCmds.GETPAR2("CPDPRG 2"))
Stuff = CPDtools.CPDparse(CPD, "1H")
#TopCmds.MSG(str(Stuff))
amp0 = CPDtools.Find_old_pl(Stuff[0])
decpw0 = CPDtools.Find_old_pw(Stuff[1], "1H")
B1_0 = MaxB1H * (math.pow(10, (ampH - amp0) / 20.)) / 1000.
if B1_0 > 1.: B1out = '% .1f' % B1_0
if B1_0 <= 1.: B1out = '75.0'
index = TopCmds.INPUT_DIALOG("Mr Setup Input", "Decoupling Window", \
["Desired 1H Decoupling Amplitude","File"],\
[B1out,CPD],["kHz",""],["1","1",],\
["Accept","Close"], ['a','c'], 10)
TopCmds.PUTPAR("CPDPRG 2", index[1])
#print(index[0], MaxB1H)
adjust = 20 * (math.log10(1000. * float(index[0]) / MaxB1H))
Hamp = ampH - adjust
decpwH = (MaxB1H / 1000. / float(index[0])) * (170. / 180.) * 2 * p90H
if units == "W":
Hamp = dBtoW(Hamp)
value = TopCmds.SELECT("Adjusting the H decoupling parameters:",\
"This will set\n 1H power ("+ Stuff[0] +") to: "+ str('%.2f' %Hamp)+" "+ units+"\n \
Pulse width (" + Stuff[1] +") to: " +str('%3.2f' %decpwH) + units,["Update", "Keep Previous"])
if value != 1:
if Stuff[0] == 'pl12':
TopCmds.PUTPAR("PL" + units + " 12", str('%3.2f' % Hamp))
elif Stuff[0] == 'pl13':
TopCmds.PUTPAR("PL" + units + " 13", str('%3.2f' % Hamp))
elif Stuff[0] == 'pl14':
TopCmds.PUTPAR("PL" + units + " 14", str('%3.2f' % Hamp))
if Stuff[1] == 'pcpd':
TopCmds.PUTPAR("PCPD 2", str('%3.2f' % decpwH))
elif Stuff[1] == 'p31':
TopCmds.PUTPAR("P 31", str('%3.2f' % decpwH))
TopCmds.PUTPAR("P 30", str('%3.2f' % decpwH))
elif Stuff[1] == 'p62':
TopCmds.PUTPAR("P 61", str('%3.2f' % decpwH))
TopCmds.PUTPAR("P 62", str('%3.2f' % decpwH))
def HDec(Unit):
CPD = "None"
CPD = pul.GetPar('prgHDec', "")
if CPD == "" or CPD == "None":
PWname = "PCPD 2"
PLname = "PL" + Unit + " 12"
PW = "5.0"
if Unit == "dB": PL = "1000."
if Unit == "W": PL = "0.0"
else:
PLname, PWname = CPDtools.CPDparse(CPD, "1H")
PLname = Format(PLname, Unit)
PWname = Format(PWname, "")
if PWname == "PCPD":
PWname = "PCPD 2"
PW = pul.GetPar('pcpdH', "")
PL = pul.GetPar('aHdec', Unit)
return CPD, PWname, PW, PLname, PL
def DDec(units):
Stuff = []
p90 = float(TopCmds.GETPAR("P 32"))
amp = float(TopCmds.GETPAR("PLdB 31"))
MaxB1 = 1000000. / 4. / p90
CPD = TopCmds.GETPAR2("CPDPRG 5")
if CPD == "mlev" or CPD == "None":
TopCmds.XCMD("cpdprg5")
CPD = (TopCmds.GETPAR2("CPDPRG 5"))
Stuff = CPDtools.CPDparse(CPD, "2D")
TopCmds.MSG(str(Stuff))
amp0 = CPDtools.Find_old_pl(Stuff[0])
decpw0 = CPDtools.Find_old_pw(Stuff[1], "2D")
B1_0 = MaxB1 * (math.pow(10, (amp - amp0) / 20.)) / 1000.
if B1_0 > 1.: B1out = '% .1f' % B1_0
if B1_0 <= 1.: B1out = '5.0'
index = TopCmds.INPUT_DIALOG("Mr Setup Input", "Decoupling Window", \
["Desired 2H Decoupling Amplitude","File"],\
[B1out,CPD],["kHz",""],["1","1",],\
["Accept","Close"], ['a','c'], 10)
TopCmds.PUTPAR("CPDPRG 5", index[1])
adjust = 20 * (math.log10(1000. * float(index[0]) / MaxB1))
ampli = amp - adjust
decpw = (MaxB1 / 1000. / float(index[0])) * 2 * p90
if units == "W":
ampli = dBtoW(ampli)
value = TopCmds.SELECT("Adjusting the D decoupling parameters:",\
"This will set\n 2H power ("+ Stuff[0] +") to: "+ str('%3.2f' %ampli)+" "+ units+"\n \
Pulse width (" + Stuff[1] +"= 180deg) to: " +str('%3.2f' %decpw) + " us",["Update", "Keep Previous"])
if value != 1:
if Stuff[0] == '':
TopCmds.PUTPAR("PL" + units + " 25", str('%3.2f' % ampli))
elif Stuff[0] == 'pl25':
TopCmds.PUTPAR("PL" + units + " 25", str('%3.2f' % ampli))
elif Stuff[0] == 'pl12':
TopCmds.MSG(
"You are using pl12 for 2H decouling. It is usually reserved for 1H \n Please verify"
)
#TopCmds.PUTPAR("PLdB 12",str('%3.2f' %ampli))
elif Stuff[0] == 'pl13':
TopCmds.MSG(
"You are using pl13 for 2H decouling. It is usually reserved for 1H \n Please verify"
)
#TopCmds.PUTPAR("PLdB 13",str('%3.2f' %ampli))
elif Stuff[0] == 'pl14':
TopCmds.MSG(
"You are using pl14 for 2H decouling. It is usually reserved for 1H \n Please verify"
)
#TopCmds.PUTPAR("PLdB 14",str('%3.2f' %ampli))
if Stuff[1] == 'pcpd':
TopCmds.PUTPAR("PCPD 5", str('%3.2f' % decpw))
elif Stuff[1] == 'p31':
TopCmds.PUTPAR("P 31", str('%3.2f' % decpw))
TopCmds.PUTPAR("P 30", str('%3.2f' % decpw))
elif Stuff[1] == 'p62':
TopCmds.PUTPAR("P 61", str('%3.2f' % decpw))
TopCmds.PUTPAR("P 62", str('%3.2f' % decpw))
aHmissi="PL 9"
aHhc ="PL 10"; aHhn ="PL 11"
aChc ="PL 20"; aNhn ="PL 19"
aHdec ="PL 12"; aHdec2="PL 13"; aHdec3="PL 14"
aCc5 ="PL 15"
aCc7 ="PL 17"
aCc7 ="PL 17"
aNhn ="PL 19"; aChc ="PL 20"
aCAe ="PL 26"; aCOe ="PL 27"
aCAr ="PL 28"; aCOr ="PL 29"
#Decoupling
prgHDec=TopCmds.GETPAR2("CPDPRG 2")
if prgHDec != "None" and prgHDec != "" :
aHdec, pHdec = CPDtools.CPDparse(prgHDec,"1H")
prgNDec=TopCmds.GETPAR2("CPDPRG 3")
if prgNDec != "None" and prgNDec != "" :
aNdec, pNdec = CPDtools.CPDparse(prgHDec,"15N")
#Loops
lRFDR ="L 3"
lREDOR="L 4"
lC5 ="L 5"
lC7 ="L 7"
lTOBSY="L 9"
#Delays
dT1 ="D 1"
dHC ="D 4"; dHC2 ="D 5"
def DDec(units):
Stuff = []
p90 = pul.GetPar('pD90', "")
amp = pul.GetPar('aD', units)
CPD = pul.GetPar('prgDDec', "")
MaxB1 = 1000000. / 4. / p90
if units == "W":
amp = WtodB(amp)
if CPD == "mlev" or CPD == "None":
TopCmds.XCMD(pul.xcmd_name(pul.pulDict['prgDDec']))
CPD = pul.GetPar('prgDDec', "")
Stuff = CPDtools.CPDparse(CPD, "2H")
amp0 = CPDtools.Find_old_pl(Stuff[0])
decpw0 = CPDtools.Find_old_pw(Stuff[1], "2H")
B1_0 = MaxB1 * (math.pow(10, (amp - amp0) / 20.)) / 1000.
if B1_0 > 1.: B1out = '% .1f' % B1_0
if B1_0 <= 1.: B1out = '15.0'
index = TopCmds.INPUT_DIALOG("Mr Setup Input", "Decoupling Window", \
["Desired 2H Decoupling Amplitude","File"],\
[B1out,CPD],["kHz",""],["1","1",],\
["Accept","Close"], ['a','c'], 10)
pul.SetPar('aDdec', index[1], "")
adjust = 20 * (math.log10(1000. * float(index[0]) / MaxB1))
ampli = amp - adjust
decpw = (MaxB1 / 1000. / float(index[0])) * 2 * p90
if units == "W":
ampli = dBtoW(ampli)
value = TopCmds.SELECT("Adjusting the 2H decoupling parameters:",\
"This will set\n 2H power ("+ Stuff[0] +") to: "+ str('%3.2f' %ampli)+" "+ units+"\n \
Pulse width (" + Stuff[1] +"= 180deg) to: " +str('%3.2f' %decpw) + " us",["Update", "Keep Previous"])
if value != 1:
pl = ""
if Stuff[0] != "": pl = pul.pp_2_xcmd(Stuff[0], "")
if pl == "":
pul.SetPar('aDdec', ampli, units)
elif pl == pul.pulDict['aDdec']:
pul.SetPar('aDdec', ampli, units)
elif pl == pul.pulDict['aHdec']:
DecError('aHdec', "13C")
elif pl == pul.pulDict['aHdec2']:
DecError('aHdec2', "13C")
elif pl == pul.pulDict['aHdec3']:
DecError('aHdec3', "13C")
if Stuff[1] == 'pcpd':
pul.SetPar("PCPD 3", decpw, "")
elif Stuff[1] == 'p31':
pul.SetPar("P31", decpw, "")
pul.SetPar("P30", decpw, "")
elif Stuff[1] == 'p62':
pul.SetPar("P61", decpw, "")
pul.SetPar("P62", decpw, "")
def HDec(units):
Stuff = []
p90 = pul.GetPar('pH90', "")
amp = pul.GetPar('aH', units)
CPD = pul.GetPar('prgHDec', "")
MaxB1 = 1000000. / 4. / p90
if CPD == "mlev" or CPD == "None":
pul.SetPar('prgHDec', "tppm15", "")
TopCmds.XCMD(pul.xcmd_name(pul.pulDict['prgHDec']))
CPD = pul.GetPar('prgHDec', "")
TopCmds.MSG(str(CPD) + " CPD")
Stuff = CPDtools.CPDparse(CPD, "1H")
TopCmds.MSG(str(Stuff) + " Stuff")
amp0 = CPDtools.Find_old_pl(Stuff[0], units)
TopCmds.MSG(str(amp0) + " amp0")
if units == "W":
amp = WtodB(amp)
amp0 = WtodB(amp0)
decpw0 = CPDtools.Find_old_pw(Stuff[1], "1H")
B1_0 = MaxB1 * (math.pow(10, (amp - amp0) / 20.)) / 1000.
if B1_0 > 1.: B1out = '% .1f' % B1_0
if B1_0 > MaxB1 / 1000.: B1out = '75.0'
if B1_0 <= 1.: B1out = '75.0'
index = TopCmds.INPUT_DIALOG("Mr Setup Input", "Decoupling Window", \
["Desired 1H Decoupling Amplitude","File"],\
[B1out,CPD],["kHz",""],["1","1",],\
["Accept","Close"], ['a','c'], 10)
pul.SetPar('prgHDec', index[1], "")
adjust = 20 * (math.log10(1000. * float(index[0]) / MaxB1))
Hamp = amp - adjust
decpwH = (MaxB1 / 1000. / float(index[0])) * (170. / 180.) * 2 * p90
if units == "W":
Hamp = dBtoW(Hamp)
value = TopCmds.SELECT("Adjusting the H decoupling parameters:",\
"This will set\n 1H power ("+ Stuff[0] +") to: "+ str('%.2f' %Hamp)+" "+ units+"\n \
Pulse width (" + Stuff[1] +") to: " +str('%3.2f' %decpwH)+" us",["Update", "Keep Previous"])
if value != 1:
pl = ""
if Stuff[0] != "": pl = pul.pp_2_xcmd(Stuff[0], "")
if pl == pul.pulDict['aHdec']:
pul.SetPar('aHdec', Hamp, units)
elif pl == pul.pulDict['aHdec2']:
pul.SetPar('aHdec2', Hamp, units)
elif pl == pul.pulDict['aHdec3']:
pul.SetPar('aHdec3', Hamp, units)
if Stuff[1] == 'pcpd':
pul.SetPar("PCPD 2", decpwH, "")
elif Stuff[1] == 'p31':
pul.SetPar("P31", decpwH, "")
pul.SetPar("P30", decpwH, "")
elif Stuff[1] == 'p62':
pul.SetPar("P61", decpwH, "")
pul.SetPar("P62", decpwH, "")
def CalDec(p90, amp, cpd, nuc, units, dfltWave, dfltB0, dfltPH, aOption,
aFaults):
"""
p90 : Dict key for Hard Pulse of Decoupled Nucleus
amp : Dict key for Hard Pulse Amplitude
cpd : Dict key for CPD file
nuc : Decoupled Nucleus
units : Watts (W) or Decibels (dB)
dfltWave: Default CPD
dfltB0 : Default field
dfltPH : Default tip angle used in CPD
aOption : List of accepted amplitude dict keys
aFaults : List of amplitude dict keys that will cause a PLEASE CONFIRM Message
"""
Stuff = []
P90 = pul.GetPar(p90, "")
Amp = pul.GetPar(amp, units)
CPD = pul.GetPar(cpd, "")
MaxB1 = 1000000. / 4. / P90
if CPD == "mlev" or CPD == "None" or CPD == None or CPD == "":
pul.SetPar(cpd, dfltWave, "")
TopCmds.XCMD(pul.xcmd_name(pul.pulDict[cpd]))
CPD = pul.GetPar(cpd, "")
Stuff = CPDtools.CPDparse(CPD, nuc)
Amp0 = CPDtools.Find_old_pl(Stuff[0], units)
if units == "W":
Amp = WtodB(Amp)
Amp0 = WtodB(Amp0)
decpw0 = CPDtools.Find_old_pw(Stuff[1], nuc)
B1_0 = MaxB1 * (math.pow(10, (Amp - Amp0) / 20.)) / 1000.
if B1_0 > 1.: B1out = '% .3f' % B1_0
if B1_0 > MaxB1 / 1000.: B1out = '% .3f' % dfltB0
if B1_0 <= 1.: B1out = '% .3f' % dfltB0
index = TopCmds.INPUT_DIALOG("Mr Setup Input", "Decoupling Window", \
["Desired "+nuc+" Decoupling Amplitude","File"],\
[B1out,CPD],["kHz",""],["1","1"],\
["Accept","Close"], [spc,ret], 10)
if index == None:
TopCmds.EXIT()
pul.SetPar(cpd, index[1], "")
pl = pul.pp_2_xcmd(Stuff[0], "")
matched = 0
for a in aOption:
if pl == pul.pulDict[a]:
matched = 1
Hamp = DecSafely(
float(index[0]) * 1000, a, MaxB1, 2 * 1000. * dfltB0, Amp,
units)
if matched == 0:
Hamp = DecSafely(
float(index[0]) * 1000, aOption[0], MaxB1, 2 * 1000. * dfltB0, Amp,
units)
decpw = (MaxB1 / 1000. / float(index[0])) * (dfltPH / 180.) * 2 * P90
if units == "W":
Hamp = dBtoW(Hamp)
value = TopCmds.SELECT("Adjusting the "+nuc+" decoupling parameters:",\
"This will set\n "+nuc+" power ("+ Stuff[0] +") to: "+ str('%.2f' %Hamp)+" "+ units+"\n \
Pulse width (" + Stuff[1] +") to: " +str('%3.2f' %decpw)+" us",["Update", "Keep Previous"])
if value != 1:
if Stuff[0] == "":
pul.SetPar(aOption[0], Hamp, units)
for i in aFaults:
if pl == pul.pulDict[i]:
DecError(f, nuc)
for a in aOption:
if pl == pul.pulDict[a]:
pul.SetPar(a, Hamp, units)
return Stuff[1], decpw