def __init__(self, analysis_obj):
super(CfdCaseWriterFoam, self).__init__()
""" analysis_obj should contains all the information needed,
boundaryConditionList is a list of all boundary Conditions objects(FemConstraint)
"""
self.analysis_obj = analysis_obj
self.solver_obj = CfdTools.getSolver(analysis_obj)
self.physics_model, isPresent = CfdTools.getPhysicsModel(analysis_obj)
self.mesh_obj = CfdTools.getMesh(analysis_obj)
self.material_objs = CfdTools.getMaterials(analysis_obj)
self.bc_group = CfdTools.getCfdBoundaryGroup(analysis_obj)
self.initial_conditions, isPresent = CfdTools.getInitialConditions(
analysis_obj)
self.porousZone_objs, self.porousZonePresent = CfdTools.getPorousObjects(
analysis_obj)
self.alphaZone_objs = CfdTools.getAlphaObjects(analysis_obj)
self.zone_objs = CfdTools.getZoneObjects(analysis_obj)
self.mesh_generated = False
self.signals = CfdCaseWriterSignals()
if len(self.alphaZone_objs) > 0:
self.physics_model['Time'] = 'Transient'
# TODO: remove this code and add GUI support for transient simulations
self.solver_obj.TimeStep = 0.001
self.solver_obj.WriteInterval = 0.05
self.solver_obj.EndTime = 1
def __init__(self, analysis_obj):
self.analysis_obj = analysis_obj
self.solver_obj = CfdTools.getSolver(analysis_obj)
self.physics_model = CfdTools.getPhysicsModel(analysis_obj)
self.mesh_obj = CfdTools.getMesh(analysis_obj)
self.material_objs = CfdTools.getMaterials(analysis_obj)
self.bc_group = CfdTools.getCfdBoundaryGroup(analysis_obj)
self.initial_conditions = CfdTools.getInitialConditions(analysis_obj)
self.porousZone_objs = CfdTools.getPorousZoneObjects(analysis_obj)
self.initialisationZone_objs = CfdTools.getInitialisationZoneObjects(analysis_obj)
self.zone_objs = CfdTools.getZoneObjects(analysis_obj)
self.mesh_generated = False
self.working_dir = CfdTools.getOutputPath(self.analysis_obj)
def __init__(self, analysis_obj):
self.analysis_obj = analysis_obj
self.solver_obj = CfdTools.getSolver(analysis_obj)
self.physics_model, isPresent = CfdTools.getPhysicsModel(analysis_obj)
self.mesh_obj = CfdTools.getMesh(analysis_obj)
self.material_objs = CfdTools.getMaterials(analysis_obj)
self.bc_group = CfdTools.getCfdBoundaryGroup(analysis_obj)
self.initial_conditions, isPresent = CfdTools.getInitialConditions(analysis_obj)
self.porousZone_objs = CfdTools.getPorousZoneObjects(analysis_obj)
self.initialisationZone_objs = CfdTools.getInitialisationZoneObjects(analysis_obj)
self.zone_objs = CfdTools.getZoneObjects(analysis_obj)
self.conversion2D_obj,self.conversionObjPresent = CfdTools.get2DConversionObject(analysis_obj)
self.mesh_generated = False
def setEdit(self, vobj, mode):
analysis_object = CfdTools.getParentAnalysisObject(self.Object)
if analysis_object is None:
CfdTools.cfdError("No parent analysis object found")
return False
physics_model = CfdTools.getPhysicsModel(analysis_object)
if not physics_model:
CfdTools.cfdError("Analysis object must have a physics object")
return False
import _TaskPanelCfdFluidProperties
taskd = _TaskPanelCfdFluidProperties.TaskPanelCfdFluidProperties(self.Object, physics_model)
taskd.obj = vobj.Object
FreeCADGui.Control.showDialog(taskd)
return True
def setEdit(self, vobj, mode):
analysis_object = CfdTools.getParentAnalysisObject(self.Object)
if analysis_object is None:
CfdTools.cfdError("No parent analysis object found")
return False
physics_model, is_present = CfdTools.getPhysicsModel(analysis_object)
if not is_present:
CfdTools.cfdError("Analysis object must have a physics object")
return False
boundaries = CfdTools.getCfdBoundaryGroup(analysis_object)
import _TaskPanelCfdInitialiseInternalFlowField
taskd = _TaskPanelCfdInitialiseInternalFlowField._TaskPanelCfdInitialiseInternalFlowField(
self.Object, physics_model, boundaries)
taskd.obj = vobj.Object
FreeCADGui.Control.showDialog(taskd)
return True
def __init__(self, analysis_obj):
super(CfdCaseWriterFoam, self).__init__()
self.analysis_obj = analysis_obj
self.solver_obj = CfdTools.getSolver(analysis_obj)
self.physics_model, isPresent = CfdTools.getPhysicsModel(analysis_obj)
self.mesh_obj = CfdTools.getMesh(analysis_obj)
self.material_objs = CfdTools.getMaterials(analysis_obj)
self.bc_group = CfdTools.getCfdBoundaryGroup(analysis_obj)
self.initial_conditions, isPresent = CfdTools.getInitialConditions(
analysis_obj)
self.porousZone_objs = CfdTools.getPorousZoneObjects(analysis_obj)
self.initialisationZone_objs = CfdTools.getInitialisationZoneObjects(
analysis_obj)
self.zone_objs = CfdTools.getZoneObjects(analysis_obj)
self.mesh_generated = False
self.signals = CfdCaseWriterSignals()
def setEdit(self, vobj, mode):
analysis_object = CfdTools.getParentAnalysisObject(self.Object)
if analysis_object is None:
CfdTools.cfdError("Boundary must have a parent analysis object")
return False
physics_model, is_present = CfdTools.getPhysicsModel(analysis_object)
if not is_present:
CfdTools.cfdError("Analysis object must have a physics object")
return False
import _TaskPanelCfdFluidBoundary
taskd = _TaskPanelCfdFluidBoundary.TaskPanelCfdFluidBoundary(self.Object, physics_model)
for obj in FreeCAD.ActiveDocument.Objects:
if obj.isDerivedFrom("Fem::FemMeshObject"):
obj.ViewObject.hide()
obj.Part.ViewObject.show()
self.Object.ViewObject.show()
taskd.obj = vobj.Object
FreeCADGui.Control.showDialog(taskd)
return True
def createInletBoundary(self):
self.inlet_boundary = CfdFluidBoundary.makeCfdFluidBoundary('inlet')
bc_set = self.inlet_boundary.BoundarySettings
bc_set['BoundaryType'] = 'inlet'
bc_set['BoundarySubtype'] = 'uniformVelocity'
bc_set['Ux'] = 1
bc_set['Uy'] = 0
bc_set['Uz'] = 0
# Test addSelection and rebuild_list_references
doc = FreeCAD.getDocument(self.__class__.__doc_name)
obj = doc.getObject('inlet')
vobj = obj.ViewObject
import _TaskPanelCfdFluidBoundary
physics_model, is_present = CfdTools.getPhysicsModel(self.analysis)
material_objs = CfdTools.getMaterials(self.analysis)
taskd = _TaskPanelCfdFluidBoundary.TaskPanelCfdFluidBoundary(obj, physics_model, material_objs)
taskd.obj = vobj.Object
taskd.selecting_references = True
taskd.addSelection(doc.Name, doc.getObject(self.__class__.__part_name).Name, 'Face1')
taskd.accept()
def Activated(self):
FreeCAD.Console.PrintMessage("Set fluid properties \n")
FreeCAD.ActiveDocument.openTransaction("Set CfdFluidMaterialProperty")
FreeCADGui.doCommand("")
FreeCADGui.addModule("CfdTools")
FreeCADGui.addModule("CfdFluidMaterial")
editing_existing = False
analysis_object = CfdTools.getActiveAnalysis()
if analysis_object is None:
CfdTools.cfdError("No active analysis object found")
return False
physics_model = CfdTools.getPhysicsModel(analysis_object)
if not physics_model or physics_model.Phase == 'Single':
members = analysis_object.Group
for i in members:
if isinstance(i.Proxy, _CfdMaterial):
FreeCADGui.activeDocument().setEdit(i.Name)
editing_existing = True
if not editing_existing:
FreeCADGui.doCommand(
"CfdTools.getActiveAnalysis().addObject(CfdFluidMaterial.makeCfdFluidMaterial('FluidProperties'))")
FreeCADGui.ActiveDocument.setEdit(FreeCAD.ActiveDocument.ActiveObject.Name)
