def OnStart():
# Récupération des informations de configuration (clé Twitter)
if Constellation.GetSetting("twitter_access_token_key") <> None:
Constellation.WriteInfo("Clés de configurations récupérées : (%s ; %s)" % (Constellation.GetSetting("twitter_access_token_key"), Constellation.GetSetting("twitter_access_token_secret")))
else:
#Constellation.RequestSettings()
Constellation.WriteError("Problèm lors de la configuration du paquet")
while(True):
# Informations basiques liées à un compte Twitter :
basicInformations = Tw.basicInformations(Constellation.GetSetting("twitter_access_token_key"), Constellation.GetSetting("twitter_access_token_secret"))
# Vérification de la connexion au serveur Twitter
try:
basicInformations.id
except error:
Constellation.WriteError("Impossible de se connecter au serveur Twitter...")
else:
# Push des données
Constellation.WriteInfo("Connexion au serveur Twitter : récupération des informations de @%s terminée !" % basicInformations.screen_name)
Constellation.PushStateObject(basicInformations.screen_name, basicInformations.AsDict(), lifetime = 30)
time.sleep(30)
pass
def NoParamterWithCustomMessageKey():
'''
MessageCallback without parameters and custom key
This MessageCallback is registered on Constellation as 'MyMethodWithWhithoutParameter'
'''
Constellation.WriteInfo(a)
Constellation.WriteInfo(b)
Constellation.WriteInfo(c)
def ButtonAction(data):
"Action et description d'un bouton poussoir branché sur un port GPIO du RPi poussé par packet ButtonRPi"
Constellation.WriteInfo('Packet ReveilISEN / Callback ButtonAction ; pin = ' + str(data.pin) + ' / event = ' + str(data.event))
global currentDisplay
# POSITION BOUTONS
# [13]_____[16][19][20]_____[26]
BUTTON_FARLEFT = 13
BUTTON_LEFT = 16
BUTTON_HOME = 19
BUTTON_RIGHT = 20
BUTTON_FARRIGHT = 26
# Clics simples
if data.event == "clicked":
if data.pin == BUTTON_FARLEFT: # Interface précédente
currentDisplay = previousDisplay(currentDisplay)
toDisplay(currentDisplay)
if data.pin == BUTTON_LEFT: # Volume moins
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"TURNDOWN_VOLUME"})
if data.pin == BUTTON_HOME: # Lecture / pause
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"PLAY_PAUSE"})
Constellation.SendMessage(ALARM_PACKAGE, "StopRinging", alarmName)
Constellation.WriteInfo("Stop la dernière alarme '%s' " % alarmName)
if data.pin == BUTTON_RIGHT: # Volume plus
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"TURNUP_VOLUME"})
if data.pin == BUTTON_FARRIGHT: # Interface suivante
currentDisplay = nextDisplay(currentDisplay)
toDisplay(currentDisplay)
# Clics doubles
elif data.event == "doubleclicked":
if data.pin == BUTTON_FARLEFT: # Interface précédente
currentDisplay = previousDisplay(currentDisplay)
toDisplay(currentDisplay)
if data.pin == BUTTON_LEFT: # Volume moins
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"TURNDOWN_VOLUME"})
if data.pin == BUTTON_HOME: # Lecture / pause
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"PLAY_PAUSE"})
Constellation.SendMessage(ALARM_PACKAGE, "StopRinging", alarmName)
Constellation.WriteInfo("Stop la dernière alarme '%s' " % alarmName)
if data.pin == BUTTON_RIGHT: # Volume plus
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"TURNUP_VOLUME"})
if data.pin == BUTTON_FARRIGHT: # Interface suivante
currentDisplay = nextDisplay(currentDisplay)
toDisplay(currentDisplay)
# Clics longs
elif data.event == "longpressed":
if data.pin == BUTTON_FARLEFT: # Snooze
snooze()
if data.pin == BUTTON_LEFT: # Titre précédent
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"PREVIOUS_SONG"})
if data.pin == BUTTON_HOME: # Home
currentDisplay = 0
toDisplay(currentDisplay)
if data.pin == BUTTON_RIGHT: # Titre suivant
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"NEXT_SONG"})
if data.pin == BUTTON_FARRIGHT: # Snooze
snooze()
def previousDisplay(currentDisplay):
if currentDisplay <= 0:
next = currentDisplay + 1
Constellation.WriteInfo("Next display (3) : " + str(next))
return len(displays) - 1
else:
next = currentDisplay + 1
Constellation.WriteInfo("Next display (4) : " + str(next))
return currentDisplay - 1
def nextDisplay(currentDisplay):
if currentDisplay >= len(displays)-1:
next = 0
Constellation.WriteInfo("Next display (1) : " + str(next))
return 0
else:
next = currentDisplay + 1
Constellation.WriteInfo("Next display (2) : " + str(next))
return currentDisplay + 1
def CallVideo(data):
if int(data) == 1:
callVideo('CALL', '"C:\\Program Files (x86)\\VideoLAN\\VLC\\vlc"', '"D:\\Autre\\Demo.mp4"')
Constellation.WriteInfo(data)
if int(data) == 2 :
callVideo('CALL', '"C:\\Program Files (x86)\\VideoLAN\\VLC\\vlc"', '"D:\\Autre\\Chess.mp4"')
Constellation.WriteInfo(data)
def MessageCallbackWithReturnAndCustomType(credential, context):
'''
MC with response (this is a Saga) and use a custom type as parameter (describe in the OnStart method)
:param CredentialInfo credential: The credential infos
:return bool:true if user match
'''
Constellation.WriteInfo("Sender : %s" % context.Sender.FriendlyName)
Constellation.WriteInfo("User=%s Password=%s" % (credential.Username, credential.Password))
return credential.Username == credential.Password
def question(token):
if token == 00000000 - 0000 - 0000 - 0000 - 000000000000:
Constellation.WriteInfo("token null")
else:
Constellation.WriteInfo(token)
Constellation.WriteInfo("Reception of the first token")
fichier = open('data.txt', "w")
fichier.write(token)
fichier.close()
return token
def MultipleParameterCallback(a, b, c):
'''
This is a MessageCallback with 3 parameters
The description can be on several lines and you can also describe the parameters like this:
:param string a: The 'a' parameter is a string !
:param int b: An integer parameter
:param bool c: A boolean and optional parameter with a default value [default:true]
'''
Constellation.WriteInfo(a)
Constellation.WriteInfo(b)
Constellation.WriteInfo(c)
def MessageCallbackWithReturn(user, password, context):
'''
MC with response (this is a Saga)
:param string user: The username
:param string password: The password
:return bool:true if user match
'''
Constellation.WriteInfo("Sender : %s" % context.Sender.FriendlyName)
Constellation.WriteInfo("User=%s Password=%s" % (user, password))
#Constellation.SendResponse(context, user == password) # Send response with the static SendResponse method
#context.SendResponse(user == password) # Send response with the SendResponse method on context
return user == password # Send response for this current context by a simple "return" the value
def MultipleParameterCallbackWithContext(a, b, c, context):
'''
This is a MessageCallback with 3 parameters and a context
The description can be on several lines and you can also describe the parameters like this:
:param string a: The 'a' parameter is a string !
:param int b: An integer and optional parameter [default:10]
:param bool c: A boolean and optional parameter with a default value [default:true]
'''
Constellation.WriteInfo("Sender : %s" % context.Sender.FriendlyName)
Constellation.WriteInfo(a)
Constellation.WriteInfo(b)
Constellation.WriteInfo(c)
def OnStart():
# Register callback on package shutdown
Constellation.OnExitCallback = OnExit
# Write log & common properties
Constellation.WriteInfo("Hi I'm '%s' and I currently running on %s and %s to Constellation" % (Constellation.PackageName, Constellation.SentinelName if not Constellation.IsStandAlone else 'local sandbox', "connected" if Constellation.IsConnected else "disconnected"))
# GetSetting
Constellation.WriteInfo("Demo1 = " + str(Constellation.GetSetting("Demo1"))) # If setting not exist, return None !
# Send message without parameter
Constellation.SendMessage("DemoPackage", "HelloWorld", [], Constellation.MessageScope.package)
# Send message with 2 parameter
Constellation.SendMessage("DemoPackage", "SendMessage", [ "+33123456789", "Hi" ], Constellation.MessageScope.package)
# Send message with complex parameter
Constellation.SendMessage("DemoPackage", "DemoComplex", { "A": "This is a string", "B": 123, "C": True }, Constellation.MessageScope.package)
# Send message "MessageCallbackWithComplexeResponse" with "123" as parameter to "Demo" pasckage and write the "A" property of the response
Constellation.SendMessageWithSaga(lambda response: Constellation.WriteInfo("A=%s" % response.A), "Demo", "MessageCallbackWithComplexResponse", 123)
# Push basic StateObject
Constellation.PushStateObject("DemoStr", "Demo de seb") # StateObject with "String" as value
Constellation.PushStateObject("DemoBool", False, lifetime=10) # StateObject with "Bool" as value and a lifetime (10 sec here)
Constellation.PushStateObject("DemoInt", 123, metadatas={ "DeviceId":"RPi", "Serial":"123" }) # StateObject with "Int" as value and metadatas
Constellation.PushStateObject("DemoFloat", 12.45, metadatas={ "DeviceId":"RPi", "Serial":"123" }, lifetime=10) # StateObject with "Float" as value, metadatas and lifetime
# Custom type descriptions
Constellation.DescribeMessageCallbackType("CredentialInfo", "Credential information", [
{ 'Name':'Username', 'Type':'string', 'Description': 'The username' },
{ 'Name':'Password', 'Type':'string', 'Description': 'The password' },
])
Constellation.DescribeStateObjectType("DemoType", "Demo type", [
{ 'Name':'Sender', 'Type':'string', 'Description': 'The demo' },
{ 'Name':'Credential', 'Type':'CredentialInfo', 'Description': 'The credential nested demo' }
])
Constellation.DeclarePackageDescriptor()
# Push complex StateObject
Constellation.PushStateObject("Demo", { "Sender": "DemoPython", "Credential": { "Username": "******", "Password":"******" } }, "DemoType", { "DeviceId": "RPi", "Serial":"123" }) # StateObject with custom type
# WriteInfo, WriteWarn & WriteError
Constellation.WriteInfo("Hello world from Python !")
Constellation.WriteWarn("This is a warning !")
Constellation.WriteError("This is an error !")
# Last StateObjects of the previous instance
if Constellation.LastStateObjects:
for so in Constellation.LastStateObjects:
Constellation.WriteInfo(" + %s @ %s" % (so.Name, so.LastUpdate))
def OnStart():
Constellation.WriteInfo("Démarrage du packet Reveil ISEN...")
toDisplay(currentDisplay)
pass
def Start():
sensorType = Constellation.GetSetting("SensorType")
if sensorType == "DHT11":
sensor = Adafruit_DHT.DHT11
elif sensorType == "DHT22":
sensor = Adafruit_DHT.DHT22
elif sensorType == "AM2302":
sensor = Adafruit_DHT.AM2302
else:
Constellation.WriteError(
"Sensor type not supported ! Check your settings")
return
sensorPin = int(Constellation.GetSetting("SensorPin"))
Constellation.WriteInfo("%s on #%d is ready !" % (sensorType, sensorPin))
lastSend = 0
while Constellation.IsRunning:
ts = int(round(time.time()))
if ts - lastSend >= int(Constellation.GetSetting("Interval")):
humidity, temperature = Adafruit_DHT.read_retry(sensor, sensorPin)
if humidity is not None and temperature is not None:
Constellation.PushStateObject(
"Temperature",
round(temperature, 2),
lifetime=int(Constellation.GetSetting("Interval")) * 2)
Constellation.PushStateObject(
"Humidity",
round(humidity, 2),
lifetime=int(Constellation.GetSetting("Interval")) * 2)
lastSend = ts
else:
Constellation.WriteError("Failed to get reading")
time.sleep(1)
def Start():
# Make the "GetTSL2561" file as executable
st = os.stat(EXECUTABLE_FILENAME)
os.chmod(EXECUTABLE_FILENAME, st.st_mode | stat.S_IEXEC)
# Describe StateObject
Constellation.DescribeStateObjectType("LightSensor.Lux",
"Lux data informations",
[{
'Name': 'Broadband',
'Type': 'int'
}, {
'Name': 'IR',
'Type': 'int'
}, {
'Name': 'Lux',
'Type': 'int'
}])
Constellation.DeclarePackageDescriptor()
# Main loop
if (bool(Constellation.GetSetting("EnableTSL2561"))):
Constellation.WriteInfo("LuxSensor is ready !")
lastSend = 0
while Constellation.IsRunning:
if (bool(Constellation.GetSetting("EnableTSL2561"))):
ts = int(round(time.time()))
if ts - lastSend >= int(Constellation.GetSetting("Interval")):
DoMeasure()
lastSend = ts
time.sleep(1)
def Start():
# Make the "modbus" file as executable
st = os.stat(EXECUTABLE_FILENAME)
os.chmod(EXECUTABLE_FILENAME, st.st_mode | stat.S_IEXEC)
# Loading devices configuration
lastQuery = {}
try:
if Constellation.GetSetting("Devices"):
for device in json.loads(Constellation.GetSetting("Devices")):
Constellation.WriteInfo(
"Registering '%s' (interval: %d ms)" %
(device["Name"], device["RequestInterval"]))
lastQuery[device["Name"]] = 0
typeDescriptor = []
for prop in device["Properties"]:
typeDescriptor.append({
"Name":
prop["Name"],
"Type":
prop["Type"] if "Type" in prop else "",
"Description":
prop["Description"] if "Description" in prop else ""
})
Constellation.DescribeStateObjectType(
"Modbus.%s" % device["StateObjectTypeName"],
"%s's datas" % device["StateObjectTypeName"],
typeDescriptor)
Constellation.DeclarePackageDescriptor()
except Exception, e:
Constellation.WriteError(
"Error while loading the device's configuration : %s" % str(e))
def SendMessage(number, text):
"Sends a text message to a specifed number"
# Composition du SMS
message = {'Text': text, 'SMSC': {'Location': 1}, 'Number': number}
# Envoi
Constellation.WriteInfo("Sending '%s' to %s" % (text, number))
sm.SendSMS(message)
def ProcessIncomingCall(call):
Constellation.WriteInfo(
"IncomingCall from '%s' (StatusCode: %s - CallID: %s)" %
(call["Number"], call["StatusCode"], call["CallID"]))
Constellation.SendMessage(
Constellation.GetSetting("IncomingEventGroupName"), "IncomingCall",
call['Number'], Constellation.MessageScope.group)
def OnStart():
global strip
strip = Adafruit_NeoPixel(LED_COUNT, LED_PIN, LED_FREQ_HZ, LED_DMA,
LED_INVERT, LED_BRIGHTNESS, LED_CHANNEL,
LED_STRIP)
strip.begin()
Constellation.WriteInfo("Démarrage du packet AffichageLED...")
def OnStart():
# Register callback on package shutdown
Constellation.OnExitCallback = OnExit
# Last StateObjects of the previous instance
if Constellation.LastStateObjects:
for so in Constellation.LastStateObjects:
Constellation.WriteInfo(" + %s @ %s" % (so.Name, so.LastUpdate))
def ProcessIncomingSMS(sms):
Constellation.WriteInfo("IncomingSMS from '%s' : %s" %
(sms["Number"], sms["Text"]))
Constellation.SendMessage(
Constellation.GetSetting("IncomingEventGroupName"), "IncomingSMS", {
'Number': sms['Number'],
'Text': sms['Text']
}, Constellation.MessageScope.group)
sm.DeleteSMS(Location=sms['Location'], Folder=0)
def Start():
global sm
# Init du GSM
Constellation.WriteInfo("Initializing GSM")
sm = gammu.StateMachine()
sm.ReadConfig(
Filename=Constellation.GetSetting("GammuConfigurationFilename"))
sm.Init()
# Deleting SMS
DeleteAllSMS()
# Attach to incoming events
AttachIncomingEvents()
# Ready
Constellation.WriteInfo("GSM package is started")
while Constellation.IsRunning:
q = sm.GetSignalQuality()
Constellation.PushStateObject("SignalQuality", q['SignalPercent'])
time.sleep(10)
def WeatherUpdated(stateobject):
global weatherForecastIO
weatherForecastIO = stateobject.Value.currently
# Si l'on se trouve sur l'écran du module, on update en live:
if(displays[currentDisplay] == displayWeather):
toDisplay(currentDisplay)
Constellation.WriteInfo("Affichage température %s : %f°C (icone : %s)" % (stateobject.Name, stateobject.Value.currently.temperature, stateobject.Value.currently.icon))
def TwitterUpdated(stateobject):
global twitterSO
twitterSO = stateobject.Value
# Si l'on se trouve sur l'écran du module, on update en live:
if(displays[currentDisplay] == displayTwitter):
toDisplay(currentDisplay)
Constellation.WriteInfo("Affichage de Twitter @%s : %i" % (stateobject.Name, stateobject.Value.followers_count))
def MusicUpdated(stateobject):
global musicSO
musicSO = stateobject.Value
# Si l'on se trouve sur l'écran du module, on update en live:
if(displays[currentDisplay] == displayMusic):
toDisplay(currentDisplay)
Constellation.WriteInfo("Affichage du titre de la musique %s" % (stateobject.Value))
def MAJPlateau(caseDeDepart, caseDarrivee):
"Bouton qui génère le plateau suivant à partir de 2 integer - mettre 0, 0 pour générer le plateau initial"
global IdProcI
Constellation.WriteInfo("MAJ du plateau lancee | [case de depart = " +
str(caseDeDepart) + " | case d'arrivee = " +
str(caseDarrivee) + "]")
global listeDesPieces
global cheminIdImage
global cheminScriptImage
if ((caseDeDepart == 0) and (caseDarrivee == 0)):
#Creation du plateau de départ quand on est en cours de jeu
Constellation.WriteInfo("Initialisation du plateau")
listeDesPieces = FICP.creePlateauHolographique(nomImage, [], 0, 0)
#Fermeture d'une eventuelle image
if (IdProcI):
os.system("kill " + str(IdProcI))
#Affichage de l'image
IdProcI = SR.showImage(cheminScriptImage)
Constellation.WriteInfo("Génération du plateau terminée")
else:
#Mise A Jour (MAJ) de la position des pieces sur le plateau
listeDesPieces = FICP.creePlateauHolographique(nomImage,
listeDesPieces,
caseDeDepart,
caseDarrivee)
#Fermeture d'une eventuelle image
if (IdProcI):
os.system("kill " + str(IdProcI))
#Affichage de l'image
IdProcI = SR.showImage(cheminScriptImage)
Constellation.WriteInfo("Maj plateau terminée")
def ProcessIncomingEvent(sm, type, data):
# type of action, one of Call, SMS, CB, USSD
if type == "SMS":
smss = sm.GetSMS(data["Folder"], data["Location"])
for sms in smss:
ProcessIncomingSMS(sms)
elif type == "Call":
ProcessIncomingCall(data)
else:
Constellation.WriteInfo("Received incoming event type %s, data: %s" %
(type, str(data)))
def ClockUpdated(stateobject):
global alarmName
Constellation.WriteInfo("Check reveil %s" % stateobject.Name)
if stateobject.Value.IsRinging == True:
Constellation.WriteWarn("REVEIL '%s' en action !" % stateobject.Name)
Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"PLAY_PLAYLIST", "uri":"spotify:user:officiallifeisstrange:playlist:1f5ZzLDTXHTDR8CYIEddpW"})
#time.sleep(10)
#Constellation.SendMessage(MUSIC_PACKAGE, "MusicControl", {"instruction":"PLAY_PAUSE"})
Constellation.SendMessage(DISPLAY_PACKAGE, "DisplayContent", {"icon":"musique", "text":stateobject.Name,"time":None,"matrix":None})
alarmName = stateobject.Value.ClockName
def AjoutElementIndex(Alias, Path, type):
"""Procedure ajoutant un element a l'index
Parametre : 1 string = le nom avec lequel on veut appeler l'element
1 string = le chemin vers l'element
"""
Constellation.WriteInfo("on est la ")
if str(type) in {
'I', 'i', 'P', 'p', 'Image', 'image', 'picture', 'Picture'
}:
Constellation.WriteInfo("on est la ")
#nouveauChemin = regroupe4ImagesEn1(Alias, Path)
Path = nouveauChemin
#change le repertoire de travail pour le bureau
os.chdir(os.path.expanduser('~') + '\\Desktop\\EHolographerW')
#ouvre le fichier d'index en mode ajouter du texte
fichier = open('Index.txt', 'a')
# écrit un retour a la ligne puis les caracteristique de l'element
fichier.write("\n" + Alias + " " + Path)
fichier.close()
def OnStart():
#declaration du StateObject
Constellation.DescribeStateObjectType(
"Sensors", "StateObject qui récupère données des capteurs ",
[{
'Name': 'CO2',
'Type': 'int',
'Description': 'Temperature en °C'
}, {
'Name': 'Soundlevel',
'Type': 'int',
'Description': ' intensite sonore en dB'
}, {
'Name': 'Temperature',
'Type': 'float',
'Description': 'niveau de co2(en ppm)'
}, {
'Name': 'Ledstate',
'Type': 'bool',
'Description': 'niveau de co2(en ppm)'
}])
#ouverture de port serie
Constellation.WriteInfo(
"Hi I'm '%s' and I currently running on %s and %s to Constellation" %
(Constellation.PackageName, Constellation.SentinelName
if not Constellation.IsStandAlone else 'local sandbox',
"connected" if Constellation.IsConnected else "disconnected"))
connected = []
ser = 0
while len(connected) <= 0 and ser == 0:
ports_series = serial.tools.list_ports.comports()
for element in ports_series:
connected.append(element.device)
if len(
connected
) > 0: # on test si plusieurs ports ont été trouvée, si oui on utilise le 1er
ser = serial.Serial(connected[0], 9600)
ser.flushInput()
while 1:
#on lit le json sorti du port serie
data = ser.readline()
#on lui explique que c'est un json
pushMe = json.loads(data)
#Et on l'envoi a constellation
Constellation.PushStateObject("Sensors", pushMe)
time.sleep(1)