def del_user(request):
"""Remove a bad user from the system via the api.
For admin use only.
Removes all of a user's bookmarks before removing the user.
"""
mdict = request.matchdict
# Submit a username.
del_username = mdict.get('username', None)
if del_username is None:
LOG.error('No username to remove.')
request.response.status_int = 400
return _api_response(request, {
'error': 'Bad Request: No username to remove.',
})
u = UserMgr.get(username=del_username)
if not u:
LOG.error('Username not found.')
request.response.status_int = 404
return _api_response(request, {
'error': 'User not found.',
})
def suspend_acct(request):
"""Reset a user account to enable them to change their password"""
params = request.params
user = request.user
# we need to get the user from the email
email = params.get('email', None)
if email is None and hasattr(request, 'json_body'):
# try the json body
email = request.json_body.get('email', None)
if user is None and email is None:
request.response.status_int = 406
return _api_response(request, {
'error': "Please submit an email address",
})
if user is None and email is not None:
user = UserMgr.get(email=email)
if user is None:
request.response.status_int = 404
return _api_response(request, {
'error': "Please submit a valid address",
'email': email
})
# check if we've already gotten an activation for this user
if user.activation is not None:
request.response.status_int = 406
return _api_response(request, {
'error': """You've already marked your account for reactivation. Please check your email for the reactivation link. Make sure to check your spam folder.""",
'username': user.username,
})
# mark them for reactivation
user.reactivate("FORGOTTEN")
# log it
AuthLog.reactivate(user.username)
# and then send an email notification
# @todo the email side of things
settings = request.registry.settings
msg = ReactivateMsg(user.email,
"Activate your account",
settings)
msg.send({
'url': request.route_url(
'reset',
username=user.username,
reset_key=user.activation.code),
'username': user.username
})
return _api_response(request, {
'message': """Your account has been marked for reactivation. Please check your email for instructions to reset your password.""",
})
def del_user(request):
"""Remove a bad user from the system via the api.
For admin use only.
Removes all of a user's bookmarks before removing the user.
"""
mdict = request.matchdict
# Submit a username.
del_username = mdict.get('username', None)
if del_username is None:
LOG.error('No username to remove.')
request.response.status_int = 400
return _api_response(request, {
'error': 'Bad Request: No username to remove.',
})
u = UserMgr.get(username=del_username)
if not u:
LOG.error('Username not found.')
request.response.status_int = 404
return _api_response(request, {
'error': 'User not found.',
})
def suspend_acct(request):
"""Reset a user account to enable them to change their password"""
params = request.params
user = request.user
# we need to get the user from the email
email = params.get('email', None)
if email is None and hasattr(request, 'json_body'):
# try the json body
email = request.json_body.get('email', None)
if user is None and email is None:
request.response.status_int = 406
return _api_response(request, {
'error': "Please submit an email address",
})
if user is None and email is not None:
user = UserMgr.get(email=email)
if user is None:
request.response.status_int = 404
return _api_response(request, {
'error': "Please submit a valid address",
'email': email
})
# check if we've already gotten an activation for this user
if user.activation is not None:
request.response.status_int = 406
return _api_response(request, {
'error': """You've already marked your account for reactivation. Please check your email for the reactivation link. Make sure to check your spam folder.""",
'username': user.username,
})
# mark them for reactivation
user.reactivate("FORGOTTEN")
# log it
AuthLog.reactivate(user.username)
# and then send an email notification
# @todo the email side of things
settings = request.registry.settings
msg = ReactivateMsg(user.email,
"Activate your account",
settings)
msg.send({
'url': request.route_url(
'reset',
username=user.username,
reset_key=user.activation.code),
'username': user.username
})
return _api_response(request, {
'message': """Your account has been marked for reactivation. Please check your email for instructions to reset your password.""",
})
def username_exists(username):
user = UserMgr.get(username=username)
response_dict = {}
if user is None:
response_dict['exists'] = False
else:
response_dict['exists'] = True
return response_dict
def user(self):
# <your database connection, however you get it, the below line
# is just an example>
# dbconn = self.registry.settings['dbconn']
user_id = unauthenticated_userid(self)
if user_id is not None:
# this should return None if the user doesn't exist
# in the database
user = UserMgr.get(user_id=user_id)
return user
def account_activate(request):
"""Reset a user after being suspended
:param username: required to know what user we're resetting
:param activation: code needed to activate
:param password: new password to use for the user
"""
params = request.params
username = params.get('username', None)
activation = params.get('code', None)
password = params.get('password', None)
new_username = params.get('new_username', None)
if username is None and activation is None and password is None:
# then try to get the same fields out of a json body
json_body = request.json_body
username = json_body.get('username', None)
activation = json_body.get('code', None)
password = json_body.get('password', None)
new_username = json_body.get('new_username', None)
if not UserMgr.acceptable_password(password):
request.response.status_int = 406
return _api_response(request, {
'error': "Come on, pick a real password please",
})
res = ActivationMgr.activate_user(username, activation, password)
if res:
# success so respond nicely
AuthLog.reactivate(username, success=True, code=activation)
# if there's a new username and it's not the same as our current
# username, update it
if new_username and new_username != username:
try:
user = UserMgr.get(username=username)
user.username = new_username
except IntegrityError, exc:
request.response.status_int = 500
return _api_response(request, {
'error': 'There was an issue setting your new username',
'exc': str(exc)
})
return _api_response(request, {
'message': "Account activated, please log in.",
'username': username,
})
def reset(request):
"""Once deactivated, allow for changing the password via activation key"""
rdict = request.matchdict
params = request.params
message = ''
# This is an initial request to show the activation form.
username = rdict.get('username', None)
activation_key = rdict.get('reset_key', None)
user = ActivationMgr.get_user(username, activation_key)
if user is None:
# just 404 if we don't have an activation code for this user
raise HTTPNotFound()
if 'code' in params:
# This is a posted form with the activation, attempt to unlock the
# user's account.
username = params.get('username', None)
activation = params.get('code', None)
password1 = params.get('password1', None)
password2 = params.get('password2', None)
new_username = params.get('new_username', None)
res = ActivationMgr.activate_user(username, activation, password1)
if res:
# success so respond nicely
AuthLog.reactivate(username, success=True, code=activation)
# if there's a new username and it's not the same as our current
# username, update it
if new_username and new_username != username:
try:
user = UserMgr.get(username=username)
user.username = new_username
except IntegrityError, exc:
message = 'There was an issue setting your new username. Please try again.'
else:
AuthLog.reactivate(username, success=False, code=activation)
message = 'There was an issue attempting to activate this account.'
if message is not '':
return {
'message': message,
'user': user
}
else:
# log the user out to have them re-login with the new password
headers = forget(request)
return HTTPFound(location=route_url('login', request),
headers=headers)
def account_activate(request):
"""Reset a user after being suspended
:param username: required to know what user we're resetting
:param activation: code needed to activate
:param password: new password to use for the user
"""
params = request.params
username = params.get('username', None)
activation = params.get('code', None)
password = params.get('password', None)
new_username = params.get('new_username', None)
if username is None and activation is None and password is None:
# then try to get the same fields out of a json body
json_body = request.json_body
username = json_body.get('username', None)
activation = json_body.get('code', None)
password = json_body.get('password', None)
new_username = json_body.get('new_username', None)
if not UserMgr.acceptable_password(password):
request.response.status_int = 406
return _api_response(request, {
'error': "Come on, pick a real password please",
})
res = ActivationMgr.activate_user(username, activation, password)
if res:
# success so respond nicely
AuthLog.reactivate(username, success=True, code=activation)
# if there's a new username and it's not the same as our current
# username, update it
if new_username and new_username != username:
try:
user = UserMgr.get(username=username)
user.username = new_username
except IntegrityError, exc:
request.response.status_int = 500
return _api_response(request, {
'error': 'There was an issue setting your new username',
'exc': str(exc)
})
return _api_response(request, {
'message': "Account activated, please log in.",
'username': username,
})
def account(request):
"""Index of account page
You can only load your own account page. If you try to view someone else's
you'll just end up with your own.
"""
# if auth fails, it'll raise an HTTPForbidden exception
with ReqAuthorize(request):
user = UserMgr.get(username=request.user.username)
return {
'user': user,
'username': user.username,
}
def reset(request):
"""Once deactivated, allow for changing the password via activation key"""
rdict = request.matchdict
params = request.params
# This is an initial request to show the activation form.
username = rdict.get('username', None)
activation_key = rdict.get('reset_key', None)
user = ActivationMgr.get_user(username, activation_key)
if user is None:
# just 404 if we don't have an activation code for this user
raise HTTPNotFound()
if 'code' in params:
# This is a posted form with the activation, attempt to unlock the
# user's account.
username = params.get('username', None)
activation = params.get('code', None)
password = params.get('new_password', None)
new_username = params.get('new_username', None)
error = None
if not UserMgr.acceptable_password(password):
# Set an error message to the template.
error = "Come on, pick a real password please."
else:
res = ActivationMgr.activate_user(username, activation, password)
if res:
# success so respond nicely
AuthLog.reactivate(username, success=True, code=activation)
# if there's a new username and it's not the same as our current
# username, update it
if new_username and new_username != username:
try:
user = UserMgr.get(username=username)
user.username = new_username
except IntegrityError, exc:
error = 'There was an issue setting your new username'
else:
AuthLog.reactivate(username, success=False, code=activation)
error = 'There was an issue attempting to activate this account.'
def accounts_invites_add(request):
"""Set the number of invites a user has available.
:matchdict username: The user to give these invites to.
:matchdict count: The number of invites to give them.
"""
rdict = request.matchdict
username = rdict.get('username', None)
count = rdict.get('count', None)
if username is not None and count is not None:
user = UserMgr.get(username=username)
if user:
user.invite_ct = count
return _api_response(request, dict(user))
else:
request.response.status_int = 404
ret = {'error': "Invalid user account."}
return _api_response(request, ret)
else:
request.response.status_int = 400
ret = {'error': "Bad request, missing parameters"}
return _api_response(request, ret)
def accounts_invites_add(request):
"""Set the number of invites a user has available.
:matchdict username: The user to give these invites to.
:matchdict count: The number of invites to give them.
"""
rdict = request.matchdict
username = rdict.get('username', None)
count = rdict.get('count', None)
if username is not None and count is not None:
user = UserMgr.get(username=username)
if user:
user.invite_ct = count
return _api_response(request, dict(user))
else:
request.response.status_int = 404
ret = {'error': "Invalid user account."}
return _api_response(request, ret)
else:
request.response.status_int = 400
ret = {'error': "Bad request, missing parameters"}
return _api_response(request, ret)
def invite_user(request):
"""Invite a new user into the system.
:param username: user that is requested we invite someone
:param email: email address of the new user
"""
params = request.params
email = params.get('email', None)
user = request.user
if not email:
# try to get it from the json body
email = request.json_body.get('email', None)
if not email:
# if still no email, I give up!
request.response.status_int = 406
return _api_response(request, {
'username': user.username,
'error': "Please submit an email address"
})
# first see if the user is already in the system
exists = UserMgr.get(email=email)
if exists:
request.response.status_int = 406
return _api_response(request, {
'username': exists.username,
'error': "This user is already a user!"
})
new_user = user.invite(email)
if new_user:
LOG.error(new_user.username)
# then this user is able to invite someone
# log it
AuthLog.reactivate(new_user.username)
# and then send an email notification
# @todo the email side of things
settings = request.registry.settings
msg = InvitationMsg(new_user.email,
"Enable your account",
settings)
msg.send(
request.route_url(
'reset',
username=new_user.username,
reset_key=new_user.activation.code))
return _api_response(request, {
'message': 'You have invited: ' + new_user.email
})
else:
# you have no invites
request.response.status_int = 406
return _api_response(request, {
'username': user.username,
'error': "You have no invites left at this time."
})
def login(request):
"""Login the user to the system
If not POSTed then show the form
If error, display the form with the error message
If successful, forward the user to their /recent
Note: the came_from stuff we're not using atm. We'll clean out if we keep
things this way
"""
# in case they're already logged-in just send them to their profile page for now
if request.user:
headers = remember(request, request.user.id, max_age=max_cookie_age)
return HTTPFound(location=request.route_url('user_account', username=request.user.username),headers=headers)
login_url = route_url('login', request)
referrer = request.url
if referrer == login_url:
referrer = '/' # never use the login form itself as came_from
came_from = request.params.get('came_from', referrer)
message = ''
email = ''
password = ''
headers = None
# import pdb; pdb.set_trace()
if 'form.submitted' in request.params:
email = request.params['email']
password = request.params['password']
LOG.debug(email)
auth = UserMgr.get(email=email)
LOG.debug(auth)
LOG.debug(UserMgr.get_list())
if auth and auth.validate_password(password) and auth.activated:
# We use the Primary Key as our identifier once someone has
# authenticated rather than the username. You can change what is
# returned as the userid by altering what is passed to remember.
headers = remember(request, auth.id, max_age=max_cookie_age)
auth.last_login = datetime.utcnow()
# log the successful login
AuthLog.login(auth.username, True)
# we're always going to return a user to their own /recent after a
# login
# return HTTPFound(
# location=request.route_url(
# 'user_bmark_recent',
# username=auth.username),
# headers=headers)
return HTTPFound(
location=request.route_url(
'user_account',
username=auth.username),
headers=headers)
# log the right level of problem
if auth and not auth.validate_password(password):
message = "Your login attempt has failed."
AuthLog.login(email, False, password=password)
elif auth and not auth.activated:
message = "User account deactivated. Please check your email."
AuthLog.login(email, False, password=password)
AuthLog.disabled(email)
elif auth is None:
message = "Failed login"
AuthLog.login(email, False, password=password)
# in case they're already logged-in just send them to their profile page for now
if request.user:
headers = remember(request, request.user.id, max_age=max_cookie_age)
return HTTPFound(
location=request.route_url(
'user_account',
username=request.user.username),
headers=headers)
return {
'message': message,
'came_from': came_from,
'email': email,
'password': password,
}
def forgot_password(request):
"""Login the user to the system
If not POSTed then show the form
If error, display the form with the error message
If successful, forward the user to their /recent
Note: the came_from stuff we're not using atm. We'll clean out if we keep
things this way
"""
# in case they're already logged-in just send them to their profile page for now
if request.user:
headers = remember(request, request.user.id, max_age=max_cookie_age)
return HTTPFound(location=request.route_url('user_account', username=request.user.username),headers=headers)
fp_url = route_url('forgot_password', request)
referrer = request.url
if referrer == fp_url:
referrer = '/' # never use the login form itself as came_from
came_from = request.params.get('came_from', referrer)
#
message = ''
# login = ''
# password = ''
# import pdb; pdb.set_trace()
if 'form.submitted' in request.params:
email = request.params['email']
# password = request.params['password']
LOG.debug(email)
user = UserMgr.get(email=email)
LOG.debug(user)
# LOG.debug(UserMgr.get_list())
settings = request.registry.settings
if user:
# Add a queue job to send the user a notification email.
user.reactivate('forgot_password')
tasks.email_forgot_password_user.delay(
user.email,
"Reset Your Password",
settings,
request.route_url(
'reset',
username=user.username,
reset_key=user.activation.code)
)
message = 'An email has been sent with instructions for resetting your password. If you do not receive it within an hour or two, check your spam folder.'
# # We use the Primary Key as our identifier once someone has
# # authenticated rather than the username. You can change what is
# # returned as the userid by altering what is passed to remember.
# headers = remember(request, auth.id, max_age=60 * 60 * 24 * 30)
# auth.last_login = datetime.utcnow()
#
# # log the successful login
# AuthLog.login(login, True)
# we're always going to return a user to their own /recent after a
# login
# return HTTPFound(
# location=request.route_url(
# 'user_bmark_recent',
# username=auth.username),
# headers=headers)
# return HTTPFound(
# location=request.route_url(
# 'forgot_password_email_confirmed'),
# headers=headers)
if not user:
message = 'There was an error attempting to find that email.'
# log the right level of problem
# if auth and not auth.validate_password(password):
# message = "Your login attempt has failed."
# AuthLog.login(login, False, password=password)
#
# elif auth and not auth.activated:
# message = "User account deactivated. Please check your email."
# AuthLog.login(login, False, password=password)
# AuthLog.disabled(login)
#
# elif auth is None:
# message = "Failed login"
# AuthLog.login(login, False, password=password)
return {
'message': message,
'came_from': came_from,
}
def is_already_taken(form, field):
if not field.data:
raise ValidationError('Insert your email')
exists = UserMgr.get(email=field.data)
if exists:
raise ValidationError('The user has already signed up.')
def signup(request):
"""Process the signup request
If there are any errors drop to the same template with the error
information.
"""
message = ''
# import pdb; pdb.set_trace()
if request.user and request.user.username:
print("user logged in")
return HTTPFound(location=request.route_url('user_account', username=request.user.username))
else:
if request.method == 'POST':
email = request.params['email']
# password = request.params['password']
LOG.debug(email)
auth = UserMgr.get(email=email)
if auth and auth.activated:
return {
'email': '',
'message': 'A user with this email already exists.',
}
else:
if auth and auth.activated is not True:
message = 'Re-sending another signup to: ' + str(email) + '\nPlease check your email.'
else:
message = 'Thank you for signing up from: ' + str(email) + '\nPlease check your email.'
request.session.flash(message)
#return HTTPFound(location=request.route_url('signup_process2'))
new_user = UserMgr.signup_user(email, 'signup')
print "new_user: "******"Enable your account",
settings,
request.route_url(
'reset',
username=new_user.username,
reset_key=new_user.activation.code
)
)
# And let the user know they're signed up.
return {'message': message,
'email':email,
}
return {'email': '',
'message': message,
}
def invite_user(request):
"""Invite a new user into the system.
:param username: user that is requested we invite someone
:param email: email address of the new user
"""
params = request.params
email = params.get('email', None)
user = request.user
if not email:
# try to get it from the json body
email = request.json_body.get('email', None)
if not email:
# if still no email, I give up!
request.response.status_int = 406
return _api_response(request, {
'username': user.username,
'error': "Please submit an email address"
})
# first see if the user is already in the system
exists = UserMgr.get(email=email)
if exists:
request.response.status_int = 406
return _api_response(request, {
'username': exists.username,
'error': "This user is already a user!"
})
new_user = user.invite(email)
if new_user:
LOG.error(new_user.username)
# then this user is able to invite someone
# log it
AuthLog.reactivate(new_user.username)
# and then send an email notification
# @todo the email side of things
settings = request.registry.settings
msg = InvitationMsg(new_user.email,
"Enable your account",
settings)
msg.send(
request.route_url(
'reset',
username=new_user.username,
reset_key=new_user.activation.code))
return _api_response(request, {
'message': 'You have invited: ' + new_user.email
})
else:
# you have no invites
request.response.status_int = 406
return _api_response(request, {
'username': user.username,
'error': "You have no invites left at this time."
})
