def main():
devicesList = Madb().get_devicesList()
if devicesList[0] == "":
devicesList = Madb().getdevices()
print("最终的devicesList=", devicesList)
print("测试开始")
results = ""
if devicesList:
try:
pool = multiprocessing.Pool(processes=len(devicesList))
print("启动进程池")
results = []
for i in range(len(devicesList)):
madb = Madb(devicesList[i])
pool.apply_async(enter_processing, (
i,
madb,
)) # 根据设备列表去循环创建进程，对每个进程调用下面的enter_processing方法。
pool.close()
pool.join()
print("进程回收完毕")
print("测试结束")
except AirtestError as ae:
print("Airtest发生错误" + traceback.format_exc())
except PocoException as pe:
print("Poco发生错误" + traceback.format_exc())
except Exception as e:
print("发生未知错误" + traceback.format_exc())
else:
print("未找到设备，测试结束")
def main():
#默认去config.ini里读取期望参与测试的设备，若为空，则选择当前连接的所有状态为“device”的设备
devicesList = Madb().get_devicesList()
if devicesList[0] == "":
devicesList = Madb().getdevices()
print("最终的devicesList=", devicesList)
#读取是否需要同步性能测试的配置。
need_performance = Madb().get_needperformance()
reportpath = os.path.join(os.getcwd(), "Report")
# 没有Report目录时自动创建
if not os.path.exists(reportpath):
os.mkdir(reportpath)
os.mkdir(reportpath + "/Screen")
print(reportpath)
print("测试开始")
if devicesList:
try:
print("启动进程池")
list = []
# 根据设备列表去循环创建进程，对每个进程调用下面的enter_processing/enter_enter_performance方法。
for i in range(len(devicesList)):
#start会被传递到2个进程函数里，作为区分最终产物html和excel的标志
start = time.localtime()
madb = Madb(devicesList[i])
if madb.get_androidversion() < 5:
print("设备{}的安卓版本低于5，不支持。".format(madb.get_mdevice()))
continue
else:
#进程通信变量flag，默认为0，完成测试时修改为1。
flag = Value('i', 0)
if need_performance == "True":
p1 = Process(target=enter_performance,
args=(
madb,
flag,
start,
))
list.append(p1)
p2 = Process(target=enter_processing,
args=(
i,
madb,
flag,
start,
))
list.append(p2)
for p in list:
p.start()
for p in list:
p.join()
print("进程回收完毕")
print("测试结束")
except AirtestError as ae:
print("Airtest发生错误" + traceback.format_exc())
except PocoException as pe:
print("Poco发生错误" + traceback.format_exc())
except Exception as e:
print("发生未知错误" + traceback.format_exc())
else:
print("未找到设备，测试结束")
def main():
#默认去config.ini里读取期望参与测试的设备，若为空，则选择当前连接的所有状态为“device”的设备
devicesList = Madb().get_devicesList()
if devicesList[0] == "":
devicesList = Madb().getdevices()
print("最终的devicesList=",devicesList)
need_performance=Madb().get_needperformance()
print("测试开始")
if devicesList:
try:
print("启动进程池")
list=[]
for i in range(len(devicesList)):
start=time.localtime()
madb=Madb(devicesList[i])
# 根据设备列表去循环创建进程，对每个进程调用下面的enter_processing/enter_enter_performance方法。
if madb.get_androidversion()<5:
print("设备{}的安卓版本低于5，不支持。".format(madb.get_mdevice()))
continue
else:
#进程通信变量flag，默认为0，完成测试时修改为1。
flag = Value('i', 0)
if need_performance=="True":
p1 = Process(target=enter_performance, args=(madb,flag,start,))
list.append(p1)
p2=Process(target=enter_processing, args=(i,madb,flag,start,))
list.append(p2)
for p in list:
p.start()
for p in list:
p.join()
print("进程回收完毕")
print("测试结束")
except AirtestError as ae:
print("Airtest发生错误" + traceback.format_exc())
except PocoException as pe:
print("Poco发生错误" + traceback.format_exc())
except Exception as e:
print("发生未知错误" + traceback.format_exc())
else:
print("未找到设备，测试结束")
def main():
devicesList = Madb().get_devicesList()
if devicesList[0] == "":
devicesList = Madb().getdevices()
print("最终的devicesList=", devicesList)
print("测试开始")
if devicesList:
try:
print("启动进程池")
list = []
for i in range(len(devicesList)):
madb = Madb(devicesList[i])
# 根据设备列表去循环创建进程，对每个进程调用下面的enter_processing/enter_enter_performance方法。
if madb.get_androidversion() < 5:
print("设备{}的安卓版本低于5，不支持。".format(madb.get_mdevice()))
continue
else:
p1 = Process(target=enter_performance, args=(madb, ))
list.append(p1)
p2 = Process(target=enter_processing, args=(
i,
madb,
))
list.append(p2)
for p in list:
p.start()
for p in list:
p.join()
print("进程回收完毕")
print("测试结束")
except AirtestError as ae:
print("Airtest发生错误" + traceback.format_exc())
except PocoException as pe:
print("Poco发生错误" + traceback.format_exc())
except Exception as e:
print("发生未知错误" + traceback.format_exc())
else:
print("未找到设备，测试结束")
fr_r_index = content.rfind(tag)
else:
fr_r_index = content.find(tag)
for i in range(1, round_num):
if reverse:
fr_r_index = content.rfind(tag, 0, fr_r_index)
else:
fr_r_index = content.find(tag, fr_r_index + 1)
fr_prev = content[0:fr_r_index]
fr_next = content[fr_r_index:len(content)]
return fr_prev, fr_next
#调试代码，单独执行的话，flag默认为1。
if __name__ == "__main__":
devicesList = Madb().getdevices()
print("最终的devicesList=", devicesList)
start = time.localtime()
'''
madb = Madb(devicesList[0])
flag = Value('i', 0)
enter_performance (madb, flag, start,)
'''
print("启动进程池")
flag = Value('i', 0)
Processlist = []
for i in range(len(devicesList)):
madb = Madb(devicesList[i])
if madb.get_androidversion() < 5:
print("设备{}的安卓版本低于5，不支持。".format(madb.get_mdevice()))
AndroidVersion, ABI)
push_minicap = adb + " -s {} push {}/{}/minicap".format(
devices, airtest_minicap_path, ABI) + " /data/local/tmp/"
push_minicapso = adb + " -s {} push {}".format(
devices, airtest_minicapso_path) + " /data/local/tmp/"
os.popen(push_minicap)
os.popen(push_minicapso)
chmod = adb + " -s {} shell chmod 777 /data/local/tmp/*".format(
devices)
os.popen(chmod)
wm_size_command = adb + " -s {} shell wm size".format(devices)
vm_size = os.popen(wm_size_command).read()
vm_size = vm_size.split(":")[1].strip()
start_minicap = adb + " -s {} shell LD_LIBRARY_PATH=/data/local/tmp /data/local/tmp/minicap -P {}@{}/0 -t".format(
devices, vm_size, vm_size)
result = os.popen(start_minicap).read()
print(result)
print("设备{}上已经成功安装并开启了MiniCap。".format(devices))
except Exception as e:
print(e, traceback.format_exc())
if __name__ == "__main__":
devicesList = Madb().get_devicesList()
if devicesList[0] == "":
devicesList = Madb().getdevices()
print("最终的devicesList=", devicesList)
for device in devicesList:
#ini_MiniCap(device)
GetScreenbyMiniCap(time.time(), device, "测试")
def main():
#默认去config.ini里读取期望参与测试的设备，若为空，则选择当前连接的所有状态为“device”的设备
devicesList = Madb().get_devicesList()
if devicesList[0] == "":
devicesList = Madb().getdevices()
print("最终的devicesList=", devicesList)
if Madb().get_apkpath() == "" or Madb().get_packagename() == "":
print("配置文件填写不全，packagename和apkpath是必填项")
devicesList = None
#读取是否需要同步性能测试的配置。
skip_performance = Madb().get_skip_performance()
skip_performance = True if skip_performance == "1" else False
is_storaged_by_excel = Madb().get_storage_by_excel()
is_storaged_by_excel = True if is_storaged_by_excel == "1" else False
reportpath = os.path.join(os.getcwd(), "Report")
# 没有Report目录时自动创建
if not os.path.exists(reportpath):
os.mkdir(reportpath)
os.mkdir(reportpath + "/Screen")
os.mkdir(reportpath + "/Data")
print(reportpath)
print("测试开始")
if devicesList:
try:
print("启动进程池")
list = []
# 根据设备列表去循环创建进程，对每个进程调用下面的enter_processing/enter_enter_performance方法。
for i in range(len(devicesList)):
#start会被传递到2个进程函数里，作为区分最终产物html和excel的标志
start = time.localtime()
madb = Madb(devicesList[i])
if madb.get_androidversion() < 5:
print("设备{}的安卓版本低于5，不支持。".format(madb.get_mdevice()))
continue
else:
#进程通信变量flag，默认为0，完成测试时修改为1。
flag = Value('i', 0)
fpsflag = Value('i', 0)
if not skip_performance:
p1 = Process(target=enter_performance,
args=(madb, flag, start,
is_storaged_by_excel))
list.append(p1)
p2 = Process(target=enter_processing,
args=(
i,
madb,
flag,
start,
))
list.append(p2)
for p in list:
p.start()
for p in list:
p.join()
print("进程回收完毕")
print("测试结束")
screenoff = Madb().get_screenoff()
screenoff = True if screenoff == "1" else False
if screenoff:
for i in devicesList:
setScreenOFF(i)
print("设备{}已灭屏".format(i))
except AirtestError as ae:
print("Airtest发生错误" + traceback.format_exc())
except PocoException as pe:
print("Poco发生错误" + traceback.format_exc())
except Exception as e:
print("发生未知错误" + traceback.format_exc())
else:
print("未找到设备，测试结束")
mailtext = "自动化测试完毕"
'''
if installflag == "Success":
try:
#尝试启动应用
madb.StartApp()
startflag = "Success"
except Exception as e:
print("运行失败" + traceback.format_exc())
time.sleep(madb.get_timeout_of_per_action())
#应用启动成功则开始运行用例
if (startflag == "Success"):
RunTestCase.RunTestCase(madb, start)
print("{}完成测试".format(devices))
else:
print("{}未运行测试。".format(devices))
else:
print("设备{}连接失败".format(devices))
except Exception as e:
print("连接设备{}失败".format(devices) + traceback.format_exc())
#无论结果如何，将flag置为1，通知Performance停止记录。
flag.value = 1
if __name__ == "__main__":
screenoff = Madb().get_screenoff()
screenoff = True if screenoff == "1" else False
devicesList = Madb().getdevices()
if screenoff:
for i in devicesList:
setScreenOFF(i)
print("设备{}已灭屏".format(i))
except Exception as e:
print(
"{}安装失败，installResult={}".format(devices, installResult) +
traceback.format_exc())
if installflag == "Success":
try:
#尝试启动应用
madb.StartApp()
startflag = "Success"
except Exception as e:
print("运行失败" + traceback.format_exc())
time.sleep(madb.get_timeout_of_per_action())
#应用启动成功则开始运行用例
if (startflag == "Success"):
RunTestCase.RunTestCase(madb, start)
print("{}完成测试".format(devices))
else:
print("{}未运行测试。".format(devices))
else:
print("设备{}连接失败".format(devices))
except Exception as e:
print("连接设备{}失败".format(devices) + traceback.format_exc())
#无论结果如何，将flag置为1，通知Performance停止记录。
flag.value = 1
madb.setScreenOFF()
if __name__ == "__main__":
madb = Madb("172.16.6.82:20484")
madb.setScreenOFF()
