def tuya_sirene_registration(self, nwkid):
self.log.logging("Tuya", "Debug", "tuya_sirene_registration - Nwkid: %s" % nwkid)
EPout = "01"
payload = "11" + get_and_inc_SQN(self, nwkid) + "10" + "002a"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
# (1) 3 x Write Attribute Cluster 0x0000 - Attribute 0xffde - DT 0x20 - Value: 0x13
EPout = "01"
write_attribute(self, nwkid, ZIGATE_EP, EPout, "0000", "0000", "00", "ffde", "20", "13", ackIsDisabled=False)
# (2) Cmd 0xf0 send on Cluster 0x0000 - no data
payload = "11" + get_and_inc_SQN(self, nwkid) + "f0"
raw_APS_request(
self,
nwkid,
EPout,
"0000",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
# (3) Cmd 0x03 on Cluster 0xef00 (Cluster Specific)
payload = "11" + get_and_inc_SQN(self, nwkid) + "03"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
# Set the Siren to °C
tuya_siren_temp_unit(self, nwkid, unit="C")
def tuya_cmd(self,
nwkid,
EPout,
cluster_frame,
sqn,
cmd,
action,
data,
action2=None,
data2=None):
if nwkid not in self.ListOfDevices:
return
transid = "%02x" % get_next_tuya_transactionId(self, nwkid)
len_data = (len(data)) // 2
payload = cluster_frame + sqn + cmd + "00" + transid + action + "00" + "%02x" % len_data + data
if action2 and data2:
len_data2 = (len(data2)) // 2
payload += action2 + "00" + "%02x" % len_data2 + data2
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
self.log.logging(
"Tuya", "Debug",
"tuya_cmd - %s/%s cmd: %s payload: %s" % (nwkid, EPout, cmd, payload))
def setXiaomiVibrationSensitivity(self, key, sensitivity="medium"):
VIBRATION_SENSIBILITY = {"high": 0x01, "medium": 0x0B, "low": 0x15}
if sensitivity not in VIBRATION_SENSIBILITY:
sensitivity = "medium"
manuf_id = "115f"
manuf_spec = "01"
cluster_id = "%04x" % 0x0000
attribute = "%04x" % 0xFF0D
data_type = "20" # Int8
data = "%02x" % VIBRATION_SENSIBILITY[sensitivity]
write_attribute(
self,
key,
ZIGATE_EP,
"01",
cluster_id,
manuf_id,
manuf_spec,
attribute,
data_type,
data,
ackIsDisabled=is_ack_tobe_disabled(self, key),
)
def send_configure_reporting_attributes_set(self, key, Ep, cluster,
direction, manufacturer_spec,
manufacturer, attrLen,
attrList, attributeList):
# Prepare the payload
#datas = ZIGATE_EP + Ep + cluster + direction + manufacturer_spec + manufacturer
#datas += "%02x" % (attrLen) + attrList
#self.logging("Debug", "--> send_configure_reporting_attributes_set - 0120 - %s" % (datas))
self.logging(
"Debug",
"--> send_configure_reporting_attributes_set Reporting %s/%s on cluster %s Len: %s Attribute List: %s"
% (key, Ep, cluster, attrLen, attrList),
nwkid=key,
)
i_sqn = zcl_configure_reporting_request(
self, key, ZIGATE_EP, Ep, cluster, direction, manufacturer_spec,
manufacturer, "%02x" % (attrLen), attrList,
is_ack_tobe_disabled(self, key))
#if is_ack_tobe_disabled(self, key):
# #i_sqn = send_zigatecmd_zcl_noack(self, key, "0120", datas)
#else:
# #i_sqn = send_zigatecmd_zcl_ack(self, key, "0120", datas)
for x in attributeList:
set_isqn_datastruct(self, "ConfigureReporting", key, Ep, cluster,
x, i_sqn)
def OrviboRegistration(self, nwkid):
cluster = "0000"
attribute = "0099"
datatype = "20"
value = "01"
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "0000" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
# Set Commissioning as Done
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "0000"
Hattribute = "0099"
data_type = "20" # Bool
data = "01"
Domoticz.Log("Orvibo registration for %s" % nwkid)
write_attribute(
self,
nwkid,
ZIGATE_EP,
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
data,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
def legrand_fc40(self, nwkid, Mode):
# With the permission of @Thorgal789 who did the all reverse enginnering of this cluster
CABLE_OUTLET_MODE = {
"Confort": 0x00,
"Confort -1": 0x01,
"Confort -2": 0x02,
"Eco": 0x03,
"Frost Protection": 0x04,
"Off": 0x05,
}
if Mode not in CABLE_OUTLET_MODE:
Domoticz.Error(" Bad Mode : %s for %s" % (Mode, nwkid))
return
Hattribute = "0000"
data_type = "30" # 8bit Enum
Hdata = CABLE_OUTLET_MODE[Mode]
# manuf_id = "1021" # Legrand Code
# manuf_spec = "01" # Manuf specific flag
cluster_id = "%04x" % 0xFC40
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "fc40" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
self.log.logging(
"Legrand",
"Debug",
"legrand %s Set Fil pilote mode - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (Mode, nwkid, Hdata, cluster_id, Hattribute, data_type),
nwkid=nwkid,
)
sqn = get_and_inc_SQN(self, nwkid)
fcf = "15"
# manufspec = "01"
manufcode = "1021"
cmd = "00"
data = "%02x" % CABLE_OUTLET_MODE[Mode]
payload = fcf + manufcode[2:4] + manufcode[0:2] + sqn + cmd + data
raw_APS_request(
self,
nwkid,
EPout,
"fc40",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
def change_fan_mode(self, NwkId, Ep, fan_mode):
if fan_mode not in FAN_MODE:
return
if "Model" in self.ListOfDevices[NwkId] and self.ListOfDevices[NwkId]["Model"] in ("AC211", "AC221", "CAC221"):
casaia_check_irPairing(self, NwkId)
# Fan Mode Sequence
data = "%02x" % 0x02
write_attribute(
self,
NwkId,
ZIGATE_EP,
Ep,
"0202",
"0000",
"00",
"0001",
"30",
data,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
data = "%02x" % FAN_MODE[fan_mode]
write_attribute(
self,
NwkId,
ZIGATE_EP,
Ep,
"0202",
"0000",
"00",
"0000",
"30",
data,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
def tuya_cmd_0x0000_0xf0(self, NwkId):
# Seen at pairing of a WGH-JLCZ02 / TS011F and TS0201 and TS0601 (MOES BRT-100)
payload = "11" + get_and_inc_SQN(self, NwkId) + "fe"
raw_APS_request(
self,
NwkId,
'01',
"0000",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
self.log.logging(
"Tuya", "Debug",
"tuya_cmd_0x0000_0xf0 - Nwkid: %s reset device Cmd: fe" % NwkId)
def read_report_configure_request(self,
nwkid,
epout,
cluster_id,
attribute_list,
manuf_specific="00",
manuf_code="0000"):
nb_attribute = "%02x" % len(attribute_list)
str_attribute_list = "".join("%04x" % x for x in attribute_list)
direction = "00"
#datas = nwkid + ZIGATE_EP + epout + cluster_id + direction + nb_attribute + manuf_specific + manuf_code + str_attribute_list
zcl_read_report_config_request(self, nwkid, ZIGATE_EP, epout,
cluster_id, direction, manuf_specific,
manuf_code, nb_attribute,
str_attribute_list,
is_ack_tobe_disabled(self, nwkid))
def setPowerOn_OnOff(self, key, OnOffMode=0xFF):
# OSRAM/LEDVANCE
# 0xfc0f --> Command 0x01
# 0xfc01 --> Command 0x01
# Tested on Ikea Bulb without any results !
POWERON_MODE = (0x00, 0x01, 0xFE) # Off # On # Previous state
if "Manufacturer" in self.ListOfDevices[key]:
manuf_spec = "01"
manuf_id = self.ListOfDevices[key]["Manufacturer"]
else:
manuf_spec = "00"
manuf_id = "0000"
EPin = "01"
EPout = "01"
for tmpEp in self.ListOfDevices[key]["Ep"]:
if "0006" in self.ListOfDevices[key]["Ep"][tmpEp]:
EPout = tmpEp
cluster_id = "0006"
attribute = "4003"
data_type = "30" #
data = "ff"
data = "%02x" % OnOffMode if OnOffMode in POWERON_MODE else "%02x" % 255
self.log.logging(
"Output", "Debug", "set_PowerOn_OnOff for %s/%s - OnOff: %s" %
(key, EPout, OnOffMode), key)
write_attribute(
self,
key,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
attribute,
data_type,
data,
ackIsDisabled=is_ack_tobe_disabled(self, key),
)
ReadAttributeRequest_0006_400x(self, key)
def cable_connected_mode(self, nwkid, Mode):
data_type = "09" # 16-bit Data
Hattribute = "0000"
Hdata = "0000"
if Mode == "10":
# Sortie de Cable: 0x0100
# Radiateur sans FIP: 0x0100
# Appareil de cuisine: 0x0100
Hdata = "0100" # Disable FIP
elif Mode == "20":
# FIP
# Radiateur avec FIP: 0x0200 + Bind fc40 + configReporting ( fc40 / 0000 / TimeOut 600 )
Hdata = "0200" # Enable FIP
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0xFC01
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "fc01" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
write_attribute(
self,
nwkid,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata[2:4] + Hdata[0:2],
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
ReadAttributeRequest_0006_0000(self, nwkid)
ReadAttributeRequest_0b04_050b(self, nwkid)
ReadAttributeRequest_fc40(self, nwkid)
def casaia_swing_OnOff(self, NwkId, OnOff):
if OnOff not in ("00", "01"):
return
EPout = get_ffad_endpoint(self, NwkId)
write_attribute(
self,
NwkId,
ZIGATE_EP,
EPout,
"0201",
CASAIA_MANUF_CODE,
"01",
"fd00",
"10",
OnOff,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
self.log.logging(
"CasaIA", "Debug",
"swing_OnOff ++++ %s/%s OnOff: %s" % (NwkId, EPout, OnOff), NwkId)
def get_group_identifiers_request(self, nwkid):
cluster_frame = "19"
sqn = get_and_inc_SQN(self, nwkid)
command = "41"
start_index = "00"
cluster = "1000"
ListOfEp = getListOfEpForCluster(self, nwkid, cluster)
if len(ListOfEp) != 1:
return
payload = cluster_frame + sqn + command + start_index
ep = ListOfEp[0]
raw_APS_request(
self,
nwkid,
ep,
cluster,
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
highpriority=True,
)
def enableOppleSwitch(self, nwkid):
if nwkid not in self.ListOfDevices:
return
if "Model" not in self.ListOfDevices[nwkid]:
return
if (self.ListOfDevices[nwkid]["Model"]
in ("lumi.remote.b686opcn01-bulb", "lumi.remote.b486opcn01-bulb",
"lumi.remote.b286opcn01-bulb")
and "Lumi" not in self.ListOfDevices[nwkid]):
self.ListOfDevices[nwkid]["Lumi"] = {"AqaraOppleBulbMode": True}
return
manuf_id = "115f"
manuf_spec = "01"
cluster_id = "fcc0"
Hattribute = "0009"
data_type = "20"
Hdata = "01"
self.log.logging(
"Lumi", "Debug",
"Write Attributes LUMI Opple Magic Word Nwkid: %s" % nwkid, nwkid)
write_attribute(
self,
nwkid,
ZIGATE_EP,
"01",
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
def tuya_send_default_response(self, Nwkid, srcEp, sqn, cmd, orig_fcf):
if Nwkid not in self.ListOfDevices:
return
orig_fcf = int(orig_fcf, 16)
frame_type = "%02x" % (0b00000011 & orig_fcf)
manuf_spec = "%02x" % ((0b00000100 & orig_fcf) >> 2)
direction = "%02x" % (not ((0b00001000 & orig_fcf) >> 3))
disabled_default = "%02x" % ((0b00010000 & orig_fcf) >> 4)
if disabled_default == "01":
return
fcf = build_fcf("00", manuf_spec, direction, disabled_default)
payload = fcf + sqn + "0b"
if manuf_spec == "01":
payload += TUYA_MANUF_CODE[2:4] + TUYA_MANUF_CODE[0:2]
payload += cmd + "00"
raw_APS_request(
self,
Nwkid,
srcEp,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
highpriority=True,
ackIsDisabled=is_ack_tobe_disabled(self, Nwkid),
)
self.log.logging(
"Tuya",
"Debug",
"tuya_send_default_response - %s/%s fcf: 0x%s ManufSpec: 0x%s Direction: 0x%s DisableDefault: 0x%s"
% (Nwkid, srcEp, fcf, manuf_spec, direction, disabled_default),
)
def thermostat_Setpoint_Danfoss(self, NwkId, setpoint):
# Command Manufactuer Specific
# Setpoint command sends: setpointType (enum8) + HeatingSetpoint (16bit)
# if setpointType = 1 the actuator will make a large movement to minimize reaction time to UI.
# If setpointType = 0 the behavior will be the same as setting the attribute "Occupied Heating Setpoint" to the same value.
# if setpointType = 2 displayed setpoint is not effected but regulated setpoint will change. can be used for Forecast functionality
self.log.logging(
"Danfoss",
"Debug",
"thermostat_Setpoint_Danfoss - for %s with value %s " %
(NwkId, setpoint),
nwkid=NwkId,
)
if "Param" not in self.ListOfDevices[NwkId]:
return
if "DanfossSetPointType" not in self.ListOfDevices[NwkId]["Param"]:
return
if not int(self.ListOfDevices[NwkId]["Param"]["DanfossSetPointType"]):
return
if int(self.ListOfDevices[NwkId]["Param"]["DanfossSetPointType"]) not in (
1, 2):
return
self.log.logging(
"Danfoss",
"Debug",
"thermostat_Setpoint_Danfoss - for %s with value %s and SetPointType: %s"
% (NwkId, setpoint,
int(self.ListOfDevices[NwkId]["Param"]["DanfossSetPointType"])),
nwkid=NwkId,
)
danfoss_setpoint_command = "40"
danfoss_setpoint_type = "%02x" % int(
self.ListOfDevices[NwkId]["Param"]["DanfossSetPointType"])
danfoss_setpoint_value = "%04x" % int(
(setpoint * 2) / 2) # Round to 0.5 degrees
EPout = getListOfEpForCluster(self, NwkId, "0201")
#
cluster_id = "%04x" % 0x0201
manuf_id = "1246"
sqn = get_and_inc_SQN(self, NwkId)
cluster_frame = build_fcf("1", "1", "0", "0")
payload = cluster_frame + manuf_id[2:4] + manuf_id[
0:
2] + sqn + danfoss_setpoint_command + danfoss_setpoint_type + danfoss_setpoint_value[
2:4] + danfoss_setpoint_value[0:2]
self.log.logging(
"Danfoss",
"Debug",
"thermostat_Setpoint_Danfoss - for %s with cluster_frame: %s payload: %s "
% (NwkId, cluster_frame, payload),
nwkid=NwkId,
)
for ep in EPout:
raw_APS_request(
self,
NwkId,
ep,
cluster_id,
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, NwkId),
)
def legrand_fc01(self, nwkid, command, OnOff):
# EnableLedInDark -> enable to detect the device in dark
# EnableDimmer -> enable/disable dimmer
# EnableLedIfOn -> enable Led with device On
self.log.logging("Legrand", "Debug", "legrand_fc01 Nwkid: %s Cmd: %s OnOff: %s " % (nwkid, command, OnOff), nwkid)
LEGRAND_REFRESH_TIME = (3 * 3600) + 15
LEGRAND_COMMAND_NAME = ("LegrandFilPilote", "EnableLedInDark", "EnableDimmer", "EnableLedIfOn", "EnableLedShutter")
if nwkid not in self.ListOfDevices:
return
if command not in LEGRAND_COMMAND_NAME:
Domoticz.Error("Unknown Legrand command %s" % command)
return
if "Model" not in self.ListOfDevices[nwkid]:
return
if self.ListOfDevices[nwkid]["Model"] in ( {} , "" ):
return
if self.ListOfDevices[nwkid]["Model"] not in LEGRAND_CLUSTER_FC01:
self.log.logging(
"Legrand",
"Error",
"%s is not an Legrand known model: %s" % (nwkid, self.ListOfDevices[nwkid]["Model"]),
nwkid,
)
return
if "Legrand" not in self.ListOfDevices[nwkid]:
self.ListOfDevices[nwkid]["Legrand"] = {}
for cmd in LEGRAND_COMMAND_NAME:
if cmd not in self.ListOfDevices[nwkid]["Legrand"]:
self.ListOfDevices[nwkid]["Legrand"][cmd] = 0xFF
if command == "EnableLedInDark" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableLedInDark"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableLedInDark"] = int(time())
data_type = "10" # Bool
Hdata = "%02x" % OnOff
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
elif command == "EnableLedShutter" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableLedShutter"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableLedShutter"] = int(time())
data_type = "10" # Bool
Hdata = "%02x" % OnOff
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
elif command == "EnableDimmer" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableDimmer"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableDimmer"] = int(time())
data_type = "09" # 16-bit Data
if OnOff == 1:
Hdata = "0101" # Enable Dimmer
elif OnOff == 0:
Hdata = "0100" # Disable Dimmer
else:
Hdata = "0000"
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
elif command == "EnableLedIfOn" and command in LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]]:
if (
self.FirmwareVersion
and self.FirmwareVersion.lower() <= "031c"
and time() < self.ListOfDevices[nwkid]["Legrand"]["EnableLedIfOn"] + LEGRAND_REFRESH_TIME
):
return
if self.FirmwareVersion and self.FirmwareVersion.lower() <= "031c":
self.ListOfDevices[nwkid]["Legrand"]["EnableLedIfOn"] = int(time())
data_type = "10" # Bool
Hdata = "%02x" % OnOff
self.log.logging(
"Legrand",
"Debug",
"--------> %s Nwkid: %s data_type: %s Hdata: %s " % (command, nwkid, data_type, Hdata),
nwkid,
)
else:
return
Hattribute = LEGRAND_CLUSTER_FC01[self.ListOfDevices[nwkid]["Model"]][command]
manuf_id = "0000"
manuf_spec = "00"
cluster_id = "%04x" % 0xFC01
EPout = "01"
for tmpEp in self.ListOfDevices[nwkid]["Ep"]:
if "fc01" in self.ListOfDevices[nwkid]["Ep"][tmpEp]:
EPout = tmpEp
self.log.logging(
"Legrand",
"Debug",
"legrand %s OnOff - for %s with value %s / cluster: %s, attribute: %s type: %s"
% (command, nwkid, Hdata, cluster_id, Hattribute, data_type),
nwkid=nwkid,
)
write_attribute(
self,
nwkid,
"01",
EPout,
cluster_id,
manuf_id,
manuf_spec,
Hattribute,
data_type,
Hdata,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
ReadAttributeRequest_fc01(self, nwkid)
def sendFC01Command(self, sqn, nwkid, ep, ClusterID, cmd, data):
self.log.logging("Legrand", "Debug", "sendFC01Command Cmd: %s Data: %s" % (cmd, data))
if cmd == "00":
# Read Attribute received
attribute = data[2:4] + data[0:2]
if ClusterID == "0000" and attribute == "f000":
# Respond to Time Of Operation
cmd = "01"
status = "00"
cluster_frame = "1c"
dataType = "23" # Uint32
PluginTimeOfOperation = "%08X" % (self.HeartbeatCount * HEARTBEAT) # Time since the plugin started
payload = (
cluster_frame
+ sqn
+ cmd
+ attribute
+ status
+ dataType
+ PluginTimeOfOperation[6:8]
+ PluginTimeOfOperation[4:6]
+ PluginTimeOfOperation[0:2]
+ PluginTimeOfOperation[2:4]
)
raw_APS_request(
self,
nwkid,
ep,
ClusterID,
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
highpriority=True,
)
self.log.logging(
"Legrand",
"Log",
"loggingLegrand - Nwkid: %s/%s Cluster: %s, Command: %s Payload: %s"
% (nwkid, ep, ClusterID, cmd, data),
)
return
if cmd == "08":
# Assign GroupId to a single remote
manufspec = "2110" # Legrand Manuf Specific : 0x1021
cluster_frame = "1d" # Cliuster Specifi, Manuf Specifi
payload = cluster_frame + manufspec + sqn + cmd + data
raw_APS_request(
self,
nwkid,
ep,
ClusterID,
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
highpriority=True,
)
self.log.logging(
"Legrand",
"Log",
"loggingLegrand - Nwkid: %s/%s Cluster: %s, Command: %s Payload: %s" % (nwkid, ep, ClusterID, cmd, data),
)
return
if cmd == "0c":
# Assign GroupId to a double remote
manufspec = "2110" # Legrand Manuf Specific : 0x1021
cluster_frame = "1d" # Cliuster Specifi, Manuf Specifi
payload = cluster_frame + manufspec + sqn + cmd + data
raw_APS_request(
self,
nwkid,
ep,
ClusterID,
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
highpriority=True,
)
self.log.logging(
"Legrand",
"Log",
"loggingLegrand - Nwkid: %s/%s Cluster: %s, Command: %s Payload: %s" % (nwkid, ep, ClusterID, cmd, data),
)
return
def tuya_registration(self, nwkid, device_reset=False, parkside=False):
if "Model" not in self.ListOfDevices[nwkid]:
return
_ModelName = self.ListOfDevices[nwkid]["Model"]
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s Model: %s" % (nwkid, _ModelName))
# (1) 3 x Write Attribute Cluster 0x0000 - Attribute 0xffde - DT 0x20 - Value: 0x13 ( 19 Decimal)
# It looks like for Lidl Watering switch the Value is 0x0d ( 13 in decimal )
EPout = "01"
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s ----- 0x13 in 0x0000/0xffde" % nwkid)
if parkside:
write_attribute(self,
nwkid,
ZIGATE_EP,
EPout,
"0000",
"0000",
"00",
"ffde",
"20",
"0d",
ackIsDisabled=True)
else:
write_attribute(self,
nwkid,
ZIGATE_EP,
EPout,
"0000",
"0000",
"00",
"ffde",
"20",
"13",
ackIsDisabled=True)
# (3) Cmd 0x03 on Cluster 0xef00 (Cluster Specific) / Zigbee Device Reset
if device_reset:
payload = "11" + get_and_inc_SQN(self, nwkid) + "03"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s reset device Cmd: 03" % nwkid)
# Gw->Zigbee gateway query MCU version
self.log.logging(
"Tuya", "Debug",
"tuya_registration - Nwkid: %s Request MCU Version Cmd: 10" % nwkid)
if _ModelName in ("TS0601-_TZE200_nklqjk62", ):
payload = "11" + get_and_inc_SQN(self, nwkid) + "10" + "000e"
else:
payload = "11" + get_and_inc_SQN(self, nwkid) + "10" + "0002"
raw_APS_request(
self,
nwkid,
EPout,
"ef00",
"0104",
payload,
zigate_ep=ZIGATE_EP,
ackIsDisabled=is_ack_tobe_disabled(self, nwkid),
)