def test_late_foottouch():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1
vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
steps = yba.getWalkingSteps(lc, rc, True)
stepMotions = yma.splitMotionIntoSegments(motion, steps)
lateCycle = 2
howLate = 5
print('steps[%d] :' % lateCycle)
print('ys_motion[%d]~ys_motion[%d] => ' %
(steps[lateCycle][0], steps[lateCycle][1]),
end=' ')
print('motion_latetouch[%d]~motion_earyltouch[%d]' %
(steps[lateCycle][0], steps[lateCycle][1] + howLate))
motion_latetouch = stepMotions[0]
for i in range(1, len(stepMotions)):
if i == lateCycle:
stepMotions[i].extend(
ymt.extendByIntegration(stepMotions[i], howLate))
# stitched = getStitchedNextMotion(stepMotions[i], motion_latetouch[-1], len(stepMotions[i])-1, yfg.halfsine)
stitched = getStitchedNextMotion(stepMotions[i],
motion_latetouch[-1],
len(stepMotions[i]) - 1,
yfg.hermite2nd)
# stitched = getStitchedNextMotion(stepMotions[i], motion_latetouch[-1], len(stepMotions[i])-1, yfg.identity)
motion_latetouch += stitched
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer(
'ys_motion',
yr.JointMotionRenderer(motion, (100, 100, 255), yr.LINK_LINE))
viewer.doc.addObject('ys_motion', motion)
viewer.doc.addRenderer(
'motion_latetouch',
yr.JointMotionRenderer(motion_latetouch, (0, 255, 0),
yr.LINK_LINE))
viewer.doc.addObject('motion_latetouch', motion_latetouch)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def test_getStitchedNextMotion():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1
vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
steps = yba.getWalkingSteps(lc, rc, True)
stepMotions = yma.splitMotionIntoSegments(motion, steps)
motion_stitch = stepMotions[0]
motion_getStitchedNextMotion = stepMotions[0]
print(len(motion_stitch), len(motion_getStitchedNextMotion))
for i in range(1, len(stepMotions)):
stepMotions[i] = stepMotions[i][:-5]
motion_stitch = stitch(motion_stitch, stepMotions[i], 5)
stitched = getStitchedNextMotion(stepMotions[i],
motion_getStitchedNextMotion[-1],
5)
motion_getStitchedNextMotion += stitched
print(len(motion_stitch), len(motion_getStitchedNextMotion))
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer(
'ys_motion',
yr.JointMotionRenderer(motion, (0, 0, 255), yr.LINK_LINE))
viewer.doc.addObject('ys_motion', motion)
viewer.doc.addRenderer(
'motion_stitch',
yr.JointMotionRenderer(motion_stitch, (0, 255, 0), yr.LINK_LINE))
viewer.doc.addObject('motion_stitch', motion_stitch)
viewer.doc.addRenderer(
'motion_getStitchedNextMotion',
yr.JointMotionRenderer(motion_getStitchedNextMotion, (255, 255, 0),
yr.LINK_LINE))
viewer.doc.addObject('motion_getStitchedNextMotion',
motion_getStitchedNextMotion)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def test_getWalkingSteps():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
motion = motion[:-10]
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1
vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
t, l_landing = yma.getTakingLandingFrames(lc)
t, r_landing = yma.getTakingLandingFrames(rc)
landing = l_landing + r_landing
landing.sort()
print 'landingFrames', landing
# steps = getWalkingSteps(lc, rc, True)
steps = getWalkingSteps(lc, rc, True, False)
# steps = getWalkingSteps(lc, rc, False)
print 'steps', steps
print
stepMotions = yma.splitMotionIntoSegments(motion, steps)
for i in range(len(steps)):
print 'stepMotions[%d]: motion[%d]~motion[%d], len %d' % (
i, steps[i][0], steps[i][1], len(stepMotions[i]))
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer(
'motion',
yr.JointMotionRenderer(motion, (0, 100, 255), yr.LINK_LINE, 3.))
viewer.doc.addObject('motion', motion)
for i in range(len(steps)):
viewer.doc.addRenderer(
'stepMotions[%d]' % i,
yr.JointMotionRenderer(stepMotions[i], (0, 255, 0),
yr.LINK_LINE, 3.))
viewer.doc.addObject('stepMotions[%d]', stepMotions[i])
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def test_stitch_fix_foot():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
print motion[0].skeleton
print
hRef = .1; vRef = .3
lfoot = motion[0].skeleton.getElementIndex('LeftFoot')
rfoot = motion[0].skeleton.getElementIndex('RightFoot')
rtoe = motion[0].skeleton.getElementIndex('RightToes_Effector')
lc = yma.getElementContactStates(motion, lfoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rfoot, hRef, vRef)
intervals, states = yba.getBipedGaitIntervals(lc, rc, 10, .1)
segments = yma.splitMotionIntoSegments(motion, intervals)
print 'wd2_WalkSameSame00'
print intervals
print [yba.GaitState.text[state] for state in states]
def test_late_foottouch():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1; vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
steps = yba.getWalkingSteps(lc, rc, True)
stepMotions = yma.splitMotionIntoSegments(motion, steps)
lateCycle = 2
howLate = 5
print 'steps[%d] :'%lateCycle
print 'motion[%d]~motion[%d] => '%(steps[lateCycle][0], steps[lateCycle][1]),
print 'motion_latetouch[%d]~motion_earyltouch[%d]'%(steps[lateCycle][0], steps[lateCycle][1]+howLate)
motion_latetouch = stepMotions[0]
for i in range(1, len(stepMotions)):
if i==lateCycle:
stepMotions[i].extend(ymt.extendByIntegration(stepMotions[i], howLate))
# stitched = getStitchedNextMotion(stepMotions[i], motion_latetouch[-1], len(stepMotions[i])-1, yfg.halfsine)
stitched = getStitchedNextMotion(stepMotions[i], motion_latetouch[-1], len(stepMotions[i])-1, yfg.hermite2nd)
# stitched = getStitchedNextMotion(stepMotions[i], motion_latetouch[-1], len(stepMotions[i])-1, yfg.identity)
motion_latetouch += stitched
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer('motion', yr.JointMotionRenderer(motion, (100,100,255), yr.LINK_LINE))
viewer.doc.addObject('motion', motion)
viewer.doc.addRenderer('motion_latetouch', yr.JointMotionRenderer(motion_latetouch, (0,255,0), yr.LINK_LINE))
viewer.doc.addObject('motion_latetouch', motion_latetouch)
viewer.startTimer(1/30.)
viewer.show()
Fl.run()
def test_getStitchedNextMotion():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1; vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
steps = yba.getWalkingSteps(lc, rc, True)
stepMotions = yma.splitMotionIntoSegments(motion, steps)
motion_stitch = stepMotions[0]
motion_getStitchedNextMotion = stepMotions[0]
print len(motion_stitch), len(motion_getStitchedNextMotion)
for i in range(1, len(stepMotions)):
stepMotions[i] = stepMotions[i][:-5]
motion_stitch = stitch(motion_stitch, stepMotions[i], 5)
stitched = getStitchedNextMotion(stepMotions[i], motion_getStitchedNextMotion[-1], 5)
motion_getStitchedNextMotion += stitched
print len(motion_stitch), len(motion_getStitchedNextMotion)
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer('motion', yr.JointMotionRenderer(motion, (0,0,255), yr.LINK_LINE))
viewer.doc.addObject('motion', motion)
viewer.doc.addRenderer('motion_stitch', yr.JointMotionRenderer(motion_stitch, (0,255,0), yr.LINK_LINE))
viewer.doc.addObject('motion_stitch', motion_stitch)
viewer.doc.addRenderer('motion_getStitchedNextMotion', yr.JointMotionRenderer(motion_getStitchedNextMotion, (255,255,0), yr.LINK_LINE))
viewer.doc.addObject('motion_getStitchedNextMotion', motion_getStitchedNextMotion)
viewer.startTimer(1/30.)
viewer.show()
Fl.run()
def test_getWalkingSteps():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
motion = motion[:-10]
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1; vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
t, l_landing = yma.getTakingLandingFrames(lc)
t, r_landing = yma.getTakingLandingFrames(rc)
landing = l_landing + r_landing
landing.sort()
print 'landingFrames', landing
# steps = getWalkingSteps(lc, rc, True)
steps = getWalkingSteps(lc, rc, True, False)
# steps = getWalkingSteps(lc, rc, False)
print 'steps', steps
print
stepMotions = yma.splitMotionIntoSegments(motion, steps)
for i in range(len(steps)):
print 'stepMotions[%d]: motion[%d]~motion[%d], len %d'%(i, steps[i][0], steps[i][1], len(stepMotions[i]))
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer('motion', yr.JointMotionRenderer(motion, (0,100,255), yr.LINK_LINE, 3.))
viewer.doc.addObject('motion', motion)
for i in range(len(steps)):
viewer.doc.addRenderer('stepMotions[%d]'%i, yr.JointMotionRenderer(stepMotions[i], (0,255,0), yr.LINK_LINE, 3.))
viewer.doc.addObject('stepMotions[%d]', stepMotions[i])
viewer.startTimer(1/30.)
viewer.show()
Fl.run()
mcfg = get_mcfg()
vpWorld = cvw.VpWorld(wcfg)
motionModel = cvm.VpMotionModel(vpWorld, motion[0], mcfg)
vpWorld.initialize()
bodyMasses = motionModel.getBodyMasses()
totalMass = motionModel.getTotalMass()
#===============================================================================
# analysis
#===============================================================================
lc = yma.getElementContactStates(motion, 'LeftFoot', hRef, vRef)
rc = yma.getElementContactStates(motion, 'RightFoot', hRef, vRef)
intervals, states = yba.getBipedGaitIntervals(lc, rc, jumpThreshold, jumpBias, stopThreshold, stopBias)
segments = yma.splitMotionIntoSegments(motion, intervals)
lFoot = motion[0].skeleton.getJointIndex('LeftFoot')
rFoot = motion[0].skeleton.getJointIndex('RightFoot')
CM_vels = [None]*len(intervals)
stepLengths = [None]*len(intervals)
stepDurations = [None]*len(intervals)
print(' CM vel step length step duration')
for i in range(len(intervals)):
startFrame = intervals[i][0]
endFrame = intervals[i][1]
stepDurations[i] = (endFrame - startFrame) * 1/30.
def save_simulation():
class ForceInfo:
def __init__(self, startFrame, duration, force):
self.startFrame = startFrame # frame
self.duration = duration # sec
self.force = force # Newton
self.targetBody = None
#===============================================================================
# load motion
#===============================================================================
MULTI_VIEWER = True
CAMERA_TRACKING = True
TORQUE_PLOT = False
NO_FOOT_SLIDING = True
SAVE_SIMULATION = True
SAVE_DIR = './saved_simulation/'
# global parameters
Kt = 20.; Dt = 2*(Kt**.5)
Ks = 2000.; Ds = 2*(Ks**.5)
K_stb_vel = .1
mu = 1.
# constaants
c_min_contact_vel = 100.
# c_min_contact_vel = 2.
c_min_contact_time = .7
c_landing_duration = .2
c_taking_duration = .3
c_swf_mid_offset = .0
c_swf_stability = .5
c_locking_vel = .05
dir = './ppmotion/'
K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = .3; K_swp_pos_cor = 0.
# K_stp_pos = 0.
# K_stb_vel = .2
K_stp_pos = 1.
filename = 'wd2_WalkSameSame01.bvh'
# filename = 'wd2_WalkSameSame01_REPEATED.bvh'
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = .3; K_swp_pos_cor = 0.
# K_stp_pos = 1.
# filename = 'wd2_WalkForwardSlow01.bvh'
## filename = 'wd2_WalkForwardSlow01_REPEATED.bvh' # 3 frame diff
## mu = 12.
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = 1.; K_swp_pos_cor = 0.
# K_stp_pos = .6
# filename = 'wd2_WalkForwardNormal00.bvh'
## filename = 'wd2_WalkForwardNormal00_REPEATED.bvh'
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = .3; K_swp_pos_cor = 0.
# K_stp_pos = 0.
# filename = 'wd2_WalkHandWav00.bvh'
## filename = 'wd2_WalkHandWav00_REPEATED.bvh'
# mu = 2.
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = .3; K_swp_pos_cor = 0.
# K_stp_pos = 0.
## filename = 'wd2_WalkForwardFast00.bvh'
### filename = 'wd2_WalkForwardFast00_REPEATED.bvh'
# mu = 2.
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = .3; K_swp_pos_cor = 0.
# K_stp_pos = 0.
# filename = 'wd2_WalkAzuma01.bvh'
## filename = 'wd2_WalkAzuma01_REPEATED.bvh' # 2 frame diff
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = 1.; K_swp_pos_cor = 0.
# K_stp_pos = 0.
# filename = 'wd2_WalkSoldier00.bvh' # K_swp_pos_sag = .0
## filename = 'wd2_WalkSoldier00_REPEATED.bvh'
# mu = 2.
# K_swp_vel_sag = .2; K_swp_vel_cor = .4; K_swp_pos_sag = .5;K_swp_pos_cor = 0.
# K_stp_pos = 0.
# filename = 'wd2_WalkForwardVFast00.bvh'
## filename = 'wd2_WalkForwardVFast00_REPEATED.bvh'
# K_swp_vel_sag = .1; K_swp_vel_cor = .4; K_swp_pos_sag = 1.; K_swp_pos_cor = 0.
# K_stp_pos = 0.
# K_stb_vel = .2
# filename = 'wd2_WalkBackward00.bvh'
### filename = 'wd2_WalkBackward00_REPEATED.bvh'
## K_swp_vel_sag = .15; K_swp_vel_cor = .35; K_swp_pos_sag = 1.; K_swp_pos_cor = 0.
## K_stp_pos = 0.
### filename = 'wd2_WalkLean00.bvh'
## filename = 'wd2_WalkLean00_REPEATED.bvh'
motion_ori = yf.readBvhFile(dir+filename)
frameTime = 1/motion_ori.fps
if 'REPEATED' in filename:
REPEATED = True
CAMERA_TRACKING = True
else:
REPEATED = False
#===============================================================================
# options
#===============================================================================
SEGMENT_EDITING = True
STANCE_FOOT_STABILIZE = True
MATCH_STANCE_LEG = True
SWING_FOOT_PLACEMENT = True
SWING_FOOT_HEIGHT = True
SWING_FOOT_ORIENTATION = False
STANCE_FOOT_PUSH = True
STANCE_FOOT_BALANCING = True
stitch_func = lambda x : 1. - yfg.hermite2nd(x)
stf_stabilize_func = yfg.concatenate([yfg.hermite2nd, yfg.one], [c_landing_duration])
match_stl_func = yfg.hermite2nd
# match_stl_func_y = yfg.hermite2nd
swf_placement_func = yfg.hermite2nd
swf_height_func = yfg.hermite2nd
swf_height_sine_func = yfg.sine
stf_balancing_func = yfg.concatenate([yfg.hermite2nd, yfg.one], [c_landing_duration])
# forceInfos = [ForceInfo(70, .4, (100,0,0))]
forceInfos = []
#===============================================================================
# initialize character
#===============================================================================
mcfgfile = open(dir + 'mcfg', 'r')
mcfg = cPickle.load(mcfgfile)
mcfgfile.close()
wcfg = ypc.WorldConfig()
wcfg.planeHeight = 0.
wcfg.useDefaultContactModel = False
wcfg.lockingVel = c_locking_vel
stepsPerFrame = 30
wcfg.timeStep = (frameTime)/stepsPerFrame
vpWorld = cvw.VpWorld(wcfg)
motionModel = cvm.VpMotionModel(vpWorld, motion_ori[0], mcfg)
controlModel = cvm.VpControlModel(vpWorld, motion_ori[0], mcfg)
vpWorld.initialize()
print controlModel
motionModel.recordVelByFiniteDiff()
controlModel.initializeHybridDynamics()
#===============================================================================
# load segment info
#===============================================================================
skeleton = motion_ori[0].skeleton
segname = os.path.splitext(filename)[0]+'.seg'
segfile = open(dir+segname, 'r')
seginfo = cPickle.load(segfile)
segfile.close()
intervals = [info['interval'] for info in seginfo]
states = [info['state'] for info in seginfo]
temp_motion = copy.deepcopy(motion_ori)
segments = yma.splitMotionIntoSegments(temp_motion, intervals)
print len(intervals), 'segments'
for i in range(len(intervals)):
print '%dth'%i, yba.GaitState.text[states[i]], intervals[i], ',',
print
motion_seg_orig = ym.JointMotion()
motion_seg_orig += segments[0]
motion_seg = ym.JointMotion()
motion_seg += segments[0]
motion_stitch = ym.JointMotion()
motion_stitch += segments[0]
motion_stf_stabilize = ym.JointMotion()
motion_match_stl = ym.JointMotion()
motion_swf_placement = ym.JointMotion()
motion_swf_height = ym.JointMotion()
motion_swf_orientation = ym.JointMotion()
motion_stf_balancing = ym.JointMotion()
motion_stf_push = ym.JointMotion()
motion_control = ym.JointMotion()
motion_debug1 = ym.JointMotion()
motion_debug2 = ym.JointMotion()
motion_debug3 = ym.JointMotion()
P = ym.JointMotion()
P_hat = ym.JointMotion()
M_tc = ym.JointMotion()
M_hat_tc_1 = ym.JointMotion()
if SAVE_SIMULATION:
motion_simulation = ym.JointMotion()
#===============================================================================
# loop variable
#===============================================================================
seg_index = [0]
acc_offset = [0]
extended = [False]
prev_R_swp = [None]
stl_y_limit_num = [0]
stl_xz_limit_num = [0]
avg_dCM = [mm.O_Vec3()]
# avg_stf_v = [mm.O_Vec3()]
# avg_stf_av = [mm.O_Vec3()]
# stf_push_func = [yfg.zero]
step_length_cur = [0.]
step_length_tar = [0.]
step_axis = [mm.O_Vec3()]
#===============================================================================
# information
#===============================================================================
bodyIDsToCheck = range(vpWorld.getBodyNum())
mus = [mu]*len(bodyIDsToCheck)
bodyMasses = controlModel.getBodyMasses()
totalMass = controlModel.getTotalMass()
lID = controlModel.name2id('LeftFoot'); rID = controlModel.name2id('RightFoot')
lUpLeg = skeleton.getJointIndex('LeftUpLeg');rUpLeg = skeleton.getJointIndex('RightUpLeg')
lKnee = skeleton.getJointIndex('LeftLeg'); rKnee = skeleton.getJointIndex('RightLeg')
lFoot = skeleton.getJointIndex('LeftFoot'); rFoot = skeleton.getJointIndex('RightFoot')
spine = skeleton.getJointIndex('Spine')
uppers = [skeleton.getJointIndex(name) for name in ['Hips', 'Spine', 'Spine1', 'LeftArm', 'LeftForeArm', 'RightArm', 'RightForeArm']]
upperMass = sum([bodyMasses[i] for i in uppers])
lLegs = [skeleton.getJointIndex(name) for name in ['LeftUpLeg', 'LeftLeg', 'LeftFoot']]
rLegs = [skeleton.getJointIndex(name) for name in ['RightUpLeg', 'RightLeg', 'RightFoot']]
allJoints = set(range(skeleton.getJointNum()))
halfFootHeight = controlModel.getBodyShape(lFoot)[1] / 2.
for fi in forceInfos:
fi.targetBody = spine
#===========================================================================
# data collection
#===========================================================================
rhip_torques = []
rknee_torques = []
rankle_torques = []
#===============================================================================
# rendering
#===============================================================================
rd_CM = [None]; rd_CP = [None]; rd_CMP = [None]
rd_forces = [None]; rd_force_points = [None]
rd_torques = []; rd_joint_positions = []
rd_point1 = [None]
rd_point2 = [None]
rd_vec1 = [None]; rd_vecori1 = [None]
rd_vec2 = [None]; rd_vecori2 = [None]
rd_frame1 = [None]
rd_frame2 = [None]
if MULTI_VIEWER:
viewer = ymv.MultiViewer(800, 655)
# viewer = ymv.MultiViewer(1600, 1255)
viewer.setRenderers1([cvr.VpModelRenderer(motionModel, MOTION_COLOR, yr.POLYGON_FILL)])
viewer.setRenderers2([cvr.VpModelRenderer(controlModel, CHARACTER_COLOR, yr.POLYGON_FILL)])
else:
viewer = ysv.SimpleViewer()
# viewer.record(False)
viewer.doc.addRenderer('motionModel', cvr.VpModelRenderer(motionModel, (0,150,255), yr.POLYGON_LINE))
viewer.doc.addRenderer('controlModel', cvr.VpModelRenderer(controlModel, (200,200,200), yr.POLYGON_LINE))
# viewer.doc.addObject('motion_ori', motion_ori)
# viewer.doc.addRenderer('motion_ori', yr.JointMotionRenderer(motion_ori, (0,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_seg_orig', yr.JointMotionRenderer(motion_seg_orig, (0,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_seg', yr.JointMotionRenderer(motion_seg, (0,150,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stitch', yr.JointMotionRenderer(motion_stitch, (0,255,200), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stf_stabilize', yr.JointMotionRenderer(motion_stf_stabilize, (255,0,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_match_stl', yr.JointMotionRenderer(motion_match_stl, (255,200,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_swf_placement', yr.JointMotionRenderer(motion_swf_placement, (255,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_swf_height', yr.JointMotionRenderer(motion_swf_height, (50,255,255), yr.LINK_BONE))
viewer.doc.addRenderer('motion_swf_orientation', yr.JointMotionRenderer(motion_swf_orientation, (255,100,0), yr.LINK_BONE))
viewer.doc.addRenderer('motion_stf_push', yr.JointMotionRenderer(motion_stf_push, (50,255,200), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stf_balancing', yr.JointMotionRenderer(motion_stf_balancing, (255,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_control', yr.JointMotionRenderer(motion_control, (255,0,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_debug1', yr.JointMotionRenderer(motion_debug1, (0,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_debug2', yr.JointMotionRenderer(motion_debug2, (255,0,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_debug3', yr.JointMotionRenderer(motion_debug3, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('M_tc', yr.JointMotionRenderer(M_tc, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('P_hat', yr.JointMotionRenderer(P_hat, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('P', yr.JointMotionRenderer(P, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('M_hat_tc_1', yr.JointMotionRenderer(M_hat_tc_1, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('rd_CM', yr.PointsRenderer(rd_CM, (255,255,0)))
# viewer.doc.addRenderer('rd_CP', yr.PointsRenderer(rd_CP, (255,0,0)))
# viewer.doc.addRenderer('rd_CMP', yr.PointsRenderer(rd_CMP, (0,255,0)))
# viewer.doc.addRenderer('forces', yr.ForcesRenderer(rd_forces, rd_force_points, (255,0,0), ratio=.01, fromPoint=False))
# viewer.doc.addRenderer('torques', yr.VectorsRenderer(rd_torques, rd_joint_positions, (255,0,0)))
# viewer.doc.addRenderer('rd_point1', yr.PointsRenderer(rd_point1, (0,255,0)))
# viewer.doc.addRenderer('rd_point2', yr.PointsRenderer(rd_point2, (255,0,0)))
# viewer.doc.addRenderer('rd_vec1', yr.VectorsRenderer(rd_vec1, rd_vecori1, (255,0,0)))
# viewer.doc.addRenderer('rd_vec2', yr.VectorsRenderer(rd_vec2, rd_vecori2, (0,255,0)))
# viewer.doc.addRenderer('rd_frame1', yr.FramesRenderer(rd_frame1, (0,200,200)))
# viewer.doc.addRenderer('rd_frame2', yr.FramesRenderer(rd_frame2, (200,200,0)))
# viewer.setMaxFrame(len(motion_ori)-1)
if not REPEATED:
viewer.setMaxFrame(len(motion_ori)-1)
else:
viewer.setMaxFrame(1000)
if CAMERA_TRACKING:
if MULTI_VIEWER:
cameraTargets1 = [None] * (viewer.getMaxFrame()+1)
cameraTargets2 = [None] * (viewer.getMaxFrame()+1)
else:
cameraTargets = [None] * (viewer.getMaxFrame()+1)
if TORQUE_PLOT:
rhip_torques = [0.]*viewer.getMaxFrame()
rknee_torques = [0.]*viewer.getMaxFrame()
rankle_torques = [0.]*viewer.getMaxFrame()
# pt = [0.]
def postFrameCallback_Always(frame):
# if frame==1: pt[0] = time.time()
# if frame==31: print 'elapsed time for 30 frames:', time.time()-pt[0]
if CAMERA_TRACKING:
if MULTI_VIEWER:
if cameraTargets1[frame]==None:
cameraTargets1[frame] = motionModel.getBodyPositionGlobal(0)
# cameraTargets1[frame] = motion_ori[frame].getJointPositionGlobal(0)
viewer.setCameraTarget1(cameraTargets1[frame])
if cameraTargets2[frame]==None:
cameraTargets2[frame] = controlModel.getJointPositionGlobal(0)
viewer.setCameraTarget2(cameraTargets2[frame])
else:
if cameraTargets[frame]==None:
cameraTargets[frame] = controlModel.getJointPositionGlobal(0)
viewer.setCameraTarget(cameraTargets[frame])
if plot!=None:
plot.updateVline(frame)
viewer.setPostFrameCallback_Always(postFrameCallback_Always)
plot = None
# plot = ymp.InteractivePlot()
if plot!=None:
plot.setXlimit(0, len(motion_ori))
plot.setYlimit(0., 1.)
plot.addDataSet('zero')
plot.addDataSet('diff')
plot.addDataSet('debug1')
plot.addDataSet('debug2')
def viewer_onClose(data):
if plot!=None:
plot.close()
viewer.onClose(data)
viewer.callback(viewer_onClose)
def simulateCallback(frame):
# seginfo
segIndex = seg_index[0]
curState = seginfo[segIndex]['state']
curInterval = yma.offsetInterval(acc_offset[0], seginfo[segIndex]['interval'])
stanceLegs = seginfo[segIndex]['stanceHips']
swingLegs = seginfo[segIndex]['swingHips']
stanceFoots = seginfo[segIndex]['stanceFoots']
swingFoots = seginfo[segIndex]['swingFoots']
swingKnees = seginfo[segIndex]['swingKnees']
groundHeight = seginfo[segIndex]['ground_height']
maxStfPushFrame = seginfo[segIndex]['max_stf_push_frame']
prev_frame = frame-1 if frame>0 else 0
# prev_frame = frame
# information
# dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(frame), bodyMasses, upperMass, uppers)
# CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(frame), bodyMasses, upperMass, uppers)
## dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(frame), bodyMasses, totalMass)
## CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(frame), bodyMasses, totalMass)
# stf_tar = motion_seg.getJointPositionGlobal(stanceFoots[0], frame)
# CMr_tar = CM_tar - stf_tar
dCM_tar = motion_seg.getJointVelocityGlobal(0, prev_frame)
CM_tar = motion_seg.getJointPositionGlobal(0, prev_frame)
# dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(prev_frame), bodyMasses, upperMass, uppers)
# CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(prev_frame), bodyMasses, upperMass, uppers)
# dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(prev_frame), bodyMasses, totalMass)
# CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(prev_frame), bodyMasses, totalMass)
stf_tar = motion_seg.getJointPositionGlobal(stanceFoots[0], prev_frame)
CMr_tar = CM_tar - stf_tar
dCM = avg_dCM[0]
CM = controlModel.getJointPositionGlobal(0)
# CM = yrp.getCM(controlModel.getJointPositionsGlobal(), bodyMasses, upperMass, uppers)
# CM = yrp.getCM(controlModel.getJointPositionsGlobal(), bodyMasses, totalMass)
CMreal = yrp.getCM(controlModel.getJointPositionsGlobal(), bodyMasses, totalMass)
stf = controlModel.getJointPositionGlobal(stanceFoots[0])
CMr = CM - stf
diff_dCM = mm.projectionOnPlane(dCM-dCM_tar, (1,0,0), (0,0,1))
diff_dCM_axis = np.cross((0,1,0), diff_dCM)
rd_vec1[0] = diff_dCM; rd_vecori1[0] = CM_tar
diff_CMr = mm.projectionOnPlane(CMr-CMr_tar, (1,0,0), (0,0,1))
# rd_vec1[0] = diff_CMr; rd_vecori1[0] = stf_tar
diff_CMr_axis = np.cross((0,1,0), diff_CMr)
direction = mm.normalize2(mm.projectionOnPlane(dCM_tar, (1,0,0), (0,0,1)))
# direction = mm.normalize2(mm.projectionOnPlane(dCM, (1,0,0), (0,0,1)))
directionAxis = np.cross((0,1,0), direction)
diff_dCM_sag, diff_dCM_cor = mm.projectionOnVector2(diff_dCM, direction)
# rd_vec1[0] = diff_dCM_sag; rd_vecori1[0] = CM_tar
diff_dCM_sag_axis = np.cross((0,1,0), diff_dCM_sag)
diff_dCM_cor_axis = np.cross((0,1,0), diff_dCM_cor)
diff_CMr_sag, diff_CMr_cor = mm.projectionOnVector2(diff_CMr, direction)
diff_CMr_sag_axis = np.cross((0,1,0), diff_CMr_sag)
diff_CMr_cor_axis = np.cross((0,1,0), diff_CMr_cor)
t = (frame-curInterval[0])/float(curInterval[1]-curInterval[0])
t_raw = t
if t>1.: t=1.
p_root = motion_stitch[frame].getJointPositionGlobal(0)
R_root = motion_stitch[frame].getJointOrientationGlobal(0)
motion_seg_orig.goToFrame(frame)
motion_seg.goToFrame(frame)
motion_stitch.goToFrame(frame)
motion_debug1.append(motion_stitch[frame].copy())
motion_debug1.goToFrame(frame)
motion_debug2.append(motion_stitch[frame].copy())
motion_debug2.goToFrame(frame)
motion_debug3.append(motion_stitch[frame].copy())
motion_debug3.goToFrame(frame)
# paper implementation
M_tc.append(motion_stitch[prev_frame])
M_tc.goToFrame(frame)
P_hat.append(M_tc[frame].copy())
P_hat.goToFrame(frame)
p_temp = ym.JointPosture(skeleton)
p_temp.rootPos = controlModel.getJointPositionGlobal(0)
p_temp.setJointOrientationsLocal(controlModel.getJointOrientationsLocal())
P.append(p_temp)
P.goToFrame(frame)
# stance foot stabilize
motion_stf_stabilize.append(motion_stitch[frame].copy())
motion_stf_stabilize.goToFrame(frame)
if STANCE_FOOT_STABILIZE:
for stanceFoot in stanceFoots:
R_target_foot = motion_seg[frame].getJointOrientationGlobal(stanceFoot)
R_current_foot = motion_stf_stabilize[frame].getJointOrientationGlobal(stanceFoot)
motion_stf_stabilize[frame].setJointOrientationGlobal(stanceFoot, cm.slerp(R_current_foot, R_target_foot , stf_stabilize_func(t)))
# R_target_foot = motion_seg[frame].getJointOrientationLocal(stanceFoot)
# R_current_foot = motion_stf_stabilize[frame].getJointOrientationLocal(stanceFoot)
# motion_stf_stabilize[frame].setJointOrientationLocal(stanceFoot, cm.slerp(R_current_foot, R_target_foot , stf_stabilize_func(t)))
# match stance leg
motion_match_stl.append(motion_stf_stabilize[frame].copy())
motion_match_stl.goToFrame(frame)
if MATCH_STANCE_LEG:
if curState!=yba.GaitState.STOP:
for i in range(len(stanceLegs)):
stanceLeg = stanceLegs[i]
stanceFoot = stanceFoots[i]
# # motion stance leg -> character stance leg as time goes
R_motion = motion_match_stl[frame].getJointOrientationGlobal(stanceLeg)
R_character = controlModel.getJointOrientationGlobal(stanceLeg)
motion_match_stl[frame].setJointOrientationGlobal(stanceLeg, cm.slerp(R_motion, R_character, match_stl_func(t)))
# t_y = match_stl_func_y(t)
# t_xz = match_stl_func(t)
#
# R_motion = motion_match_stl[frame].getJointOrientationGlobal(stanceLeg)
# R_character = controlModel.getJointOrientationGlobal(stanceLeg)
# R = np.dot(R_character, R_motion.T)
# R_y, R_xz = mm.projectRotation((0,1,0), R)
# motion_match_stl[frame].mulJointOrientationGlobal(stanceLeg, mm.scaleSO3(R_xz, t_xz))
# motion_match_stl[frame].mulJointOrientationGlobal(stanceLeg, mm.scaleSO3(R_y, t_y))
# swing foot placement
motion_swf_placement.append(motion_match_stl[frame].copy())
motion_swf_placement.goToFrame(frame)
if SWING_FOOT_PLACEMENT:
t_swing_foot_placement = swf_placement_func(t);
if extended[0]:
R_swp_sag = prev_R_swp[0][0]
R_swp_cor = prev_R_swp[0][1]
else:
R_swp_sag = mm.I_SO3(); R_swp_cor = mm.I_SO3()
R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_dCM_sag_axis * K_swp_vel_sag * -t_swing_foot_placement))
R_swp_cor = np.dot(R_swp_cor, mm.exp(diff_dCM_cor_axis * K_swp_vel_cor * -t_swing_foot_placement))
if np.dot(direction, diff_CMr_sag) < 0:
R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_CMr_sag_axis * K_swp_pos_sag * -t_swing_foot_placement))
R_swp_cor = np.dot(R_swp_cor, mm.exp(diff_CMr_cor_axis * K_swp_pos_cor * -t_swing_foot_placement))
for i in range(len(swingLegs)):
swingLeg = swingLegs[i]
swingFoot = swingFoots[i]
# save swing foot global orientation
# R_swf = motion_swf_placement[frame].getJointOrientationGlobal(swingFoot)
# rotate swing leg
motion_swf_placement[frame].mulJointOrientationGlobal(swingLeg, R_swp_sag)
motion_swf_placement[frame].mulJointOrientationGlobal(swingLeg, R_swp_cor)
# restore swing foot global orientation
# motion_swf_placement[frame].setJointOrientationGlobal(swingFoot, R_swf)
prev_R_swp[0] = (R_swp_sag, R_swp_cor)
# swing foot height
motion_swf_height.append(motion_swf_placement[frame].copy())
motion_swf_height.goToFrame(frame)
if SWING_FOOT_HEIGHT:
for swingFoot in swingFoots:
stanceFoot = stanceFoots[0]
# save foot global orientation
R_foot = motion_swf_height[frame].getJointOrientationGlobal(swingFoot)
R_stance_foot = motion_swf_height[frame].getJointOrientationGlobal(stanceFoot)
height_tar = motion_swf_height[frame].getJointPositionGlobal(swingFoot)[1] - motion_swf_height[frame].getJointPositionGlobal(stanceFoot)[1]
# motion_debug1[frame] = motion_swf_height[frame].copy()
# rotate
motion_swf_height[frame].rotateByTarget(controlModel.getJointOrientationGlobal(0))
# motion_debug2[frame] = motion_swf_height[frame].copy()
# motion_debug2[frame].translateByTarget(controlModel.getJointPositionGlobal(0))
height_cur = motion_swf_height[frame].getJointPositionGlobal(swingFoot)[1] - motion_swf_height[frame].getJointPositionGlobal(stanceFoot)[1]
offset_height = (height_tar - height_cur) * swf_height_func(t) * c_swf_stability
offset_sine = c_swf_mid_offset * swf_height_sine_func(t)
offset = 0.
offset += offset_height
offset += offset_sine
if offset > 0.:
newPosition = motion_swf_height[frame].getJointPositionGlobal(swingFoot)
newPosition[1] += offset
aik.ik_analytic(motion_swf_height[frame], swingFoot, newPosition)
else:
newPosition = motion_swf_height[frame].getJointPositionGlobal(stanceFoot)
newPosition[1] -= offset
aik.ik_analytic(motion_swf_height[frame], stanceFoot, newPosition)
# return
# motion_debug3[frame] = motion_swf_height[frame].copy()
# motion_debug3[frame].translateByTarget(controlModel.getJointPositionGlobal(0))
motion_swf_height[frame].rotateByTarget(R_root)
# restore foot global orientation
motion_swf_height[frame].setJointOrientationGlobal(swingFoot, R_foot)
motion_swf_height[frame].setJointOrientationGlobal(stanceFoot, R_stance_foot)
if plot!=None:
plot.addDataPoint('debug1', frame, height_tar)
plot.addDataPoint('debug2', frame, height_cur)
# plot.addDataPoint('diff', frame, diff)
# swing foot orientation
motion_swf_orientation.append(motion_swf_height[frame].copy())
motion_swf_orientation.goToFrame(frame)
if SWING_FOOT_ORIENTATION:
# swf_orientation_func = yfg.concatenate([yfg.zero, yfg.hermite2nd, yfg.one], [.25, .75])
for swingFoot in swingFoots:
R_target_foot = motion_seg[curInterval[1]].getJointOrientationGlobal(swingFoot)
R_current_foot = motion_swf_orientation[frame].getJointOrientationGlobal(swingFoot)
motion_swf_orientation[frame].setJointOrientationGlobal(swingFoot, cm.slerp(R_current_foot, R_target_foot, swf_orientation_func(t)))
# swf_stabilize_func = yfg.concatenate([yfg.hermite2nd, yfg.one], [c_taking_duration])
# push orientation
# for swingFoot in swingFoots:
# R_target_foot = motion_seg[frame].getJointOrientationGlobal(swingFoot)
# R_current_foot = motion_swf_orientation[frame].getJointOrientationGlobal(swingFoot)
# motion_swf_orientation[frame].setJointOrientationGlobal(swingFoot, cm.slerp(R_current_foot, R_target_foot , swf_stabilize_func(t)))
# stance foot push
motion_stf_push.append(motion_swf_orientation[frame].copy())
motion_stf_push.goToFrame(frame)
if STANCE_FOOT_PUSH:
for swingFoot in swingFoots:
# max_t = (maxStfPushFrame)/float(curInterval[1]-curInterval[0])
# stf_push_func = yfg.concatenate([yfg.sine, yfg.zero], [max_t*2])
stf_push_func = yfg.concatenate([yfg.sine, yfg.zero], [c_taking_duration*2])
R_swp_sag = mm.I_SO3()
# R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_dCM_sag_axis * K_stp_vel * -stf_push_func(t)))
# if step_length_cur[0] < step_length_tar[0]:
# ratio = step_length_cur[0] / step_length_tar[0]
# R_max = maxmaxStfPushFrame
# R_zero =
R_swp_sag = np.dot(R_swp_sag, mm.exp((step_length_tar[0] - step_length_cur[0])*step_axis[0] * K_stp_pos * -stf_push_func(t)))
motion_stf_push[frame].mulJointOrientationGlobal(swingFoot, R_swp_sag)
# stance foot balancing
motion_stf_balancing.append(motion_stf_push[frame].copy())
motion_stf_balancing.goToFrame(frame)
if STANCE_FOOT_BALANCING:
R_stb = mm.exp(diff_dCM_axis * K_stb_vel * stf_balancing_func(t))
for stanceFoot in stanceFoots:
if frame < 5: continue
motion_stf_balancing[frame].mulJointOrientationGlobal(stanceFoot, R_stb)
# control trajectory
motion_control.append(motion_stf_balancing[frame].copy())
motion_control.goToFrame(frame)
#=======================================================================
# tracking with inverse dynamics
#=======================================================================
th_r = motion_control.getDOFPositions(frame)
th = controlModel.getDOFPositions()
dth_r = motion_control.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion_control.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r, Kt, Dt)
#=======================================================================
# simulation
#=======================================================================
CP = mm.v3(0.,0.,0.)
F = mm.v3(0.,0.,0.)
avg_dCM[0] = mm.v3(0.,0.,0.)
# external force rendering info
del rd_forces[:]; del rd_force_points[:]
for fi in forceInfos:
if fi.startFrame <= frame and frame < fi.startFrame + fi.duration*(1/frameTime):
rd_forces.append(fi.force)
rd_force_points.append(controlModel.getBodyPositionGlobal(fi.targetBody))
for i in range(stepsPerFrame):
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(bodyIDsToCheck, mus, Ks, Ds)
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals, contactForces)
# apply external force
for fi in forceInfos:
if fi.startFrame <= frame and frame < fi.startFrame + fi.duration*(1/frameTime):
controlModel.applyBodyForceGlobal(fi.targetBody, fi.force)
controlModel.setDOFAccelerations(ddth_des)
controlModel.solveHybridDynamics()
if TORQUE_PLOT:
rhip_torques[frame] += mm.length(controlModel.getJointTorqueLocal(rUpLeg))
rknee_torques[frame] += mm.length(controlModel.getJointTorqueLocal(rKnee))
rankle_torques[frame] += mm.length(controlModel.getJointTorqueLocal(rFoot))
rd_torques[:] = [controlModel.getJointTorqueLocal(i)/100. for i in range(skeleton.getJointNum())]
rd_joint_positions[:] = controlModel.getJointPositionsGlobal()
vpWorld.step()
# yvu.align2D(controlModel)
if len(contactForces) > 0:
CP += yrp.getCP(contactPositions, contactForces)
F += sum(contactForces)
avg_dCM[0] += controlModel.getJointVelocityGlobal(0)
# avg_dCM[0] += yrp.getCM(controlModel.getJointVelocitiesGlobal(), bodyMasses, upperMass, uppers)
# avg_dCM[0] += yrp.getCM(controlModel.getJointVelocitiesGlobal(), bodyMasses, totalMass)
# if len(stanceFoots)>0:
# avg_stf_v[0] += controlModel.getJointVelocityGlobal(stanceFoots[0])
# avg_stf_av[0] += controlModel.getJointAngVelocityGlobal(stanceFoots[0])
CP /= stepsPerFrame
F /= stepsPerFrame
avg_dCM[0] /= stepsPerFrame
# if len(stanceFoots)>0:
# avg_stf_v[0] /= stepsPerFrame
# avg_stf_av[0] /= stepsPerFrame
# rd_vec1[0] = avg_stf_av[0]; rd_vec1[0][0] = 0.; rd_vec1[0][2] = 0.
# rd_vecori1[0]= controlModel.getJointPositionGlobal(stanceFoots[0])
#=======================================================================
# segment editing
#=======================================================================
lastFrame = False
if SEGMENT_EDITING:
if curState==yba.GaitState.STOP:
if frame == len(motion_seg)-1:
lastFrame = True
elif (curState==yba.GaitState.LSWING or curState==yba.GaitState.RSWING) and t>c_min_contact_time:
swingID = lID if curState==yba.GaitState.LSWING else rID
contact = False
if swingID in bodyIDs:
minContactVel = 1000.
for i in range(len(bodyIDs)):
if bodyIDs[i]==swingID:
vel = controlModel.getBodyVelocityGlobal(swingID, contactPositionLocals[i])
vel[1] = 0
contactVel = mm.length(vel)
if contactVel < minContactVel: minContactVel = contactVel
if minContactVel < c_min_contact_vel: contact = True
extended[0] = False
if contact:
# print frame, 'foot touch'
lastFrame = True
acc_offset[0] += frame - curInterval[1]
elif frame == len(motion_seg)-1:
print frame, 'extend frame', frame+1
preserveJoints = []
# preserveJoints = [lFoot, rFoot]
# preserveJoints = [lFoot, rFoot, lKnee, rKnee]
# preserveJoints = [lFoot, rFoot, lKnee, rKnee, lUpLeg, rUpLeg]
stanceKnees = [rKnee] if curState==yba.GaitState.LSWING else [lKnee]
preserveJoints = [stanceFoots[0], stanceKnees[0], stanceLegs[0]]
diff = 3
motion_seg_orig.extend([motion_seg_orig[-1]])
motion_seg.extend(ymt.extendByIntegration_root(motion_seg, 1, diff))
motion_stitch.extend(ymt.extendByIntegration_constant(motion_stitch, 1, preserveJoints, diff))
# # extend for swing foot ground speed matching & swing foot height lower
## extendedPostures = ymt.extendByIntegration(motion_stitch, 1, preserveJoints, diff)
## extendedPostures = [motion_stitch[-1]]
##
# extendFrameNum = frame - curInterval[1] + 1
# k = 1.-extendFrameNum/5.
# if k<0.: k=0.
# extendedPostures = ymt.extendByIntegrationAttenuation(motion_stitch, 1, preserveJoints, diff, k)
#
## if len(swingFoots)>0 and np.inner(dCM_tar, dCM)>0.:
## print frame, 'speed matching'
## R_swf = motion_stitch[-1].getJointOrientationGlobal(swingFoots[0])
##
## p_swf = motion_stitch[-1].getJointPositionGlobal(swingFoots[0])
## v_swf = motion_stitch.getJointVelocityGlobal(swingFoots[0], frame-diff, frame)
## a_swf = motion_stitch.getJointAccelerationGlobal(swingFoots[0], frame-diff, frame)
## p_swf += v_swf * (frameTime) + a_swf * (frameTime)*(frameTime)
## aik.ik_analytic(extendedPostures[0], swingFoots[0], p_swf)
##
## extendedPostures[0].setJointOrientationGlobal(swingFoots[0], R_swf)
#
# motion_stitch.extend(extendedPostures)
extended[0] = True
else:
if frame == len(motion_seg)-1: lastFrame = True
if lastFrame:
if segIndex < len(segments)-1:
print '%d (%d): end of %dth seg (%s, %s)'%(frame, frame-curInterval[1],segIndex, yba.GaitState.text[curState], curInterval)
if plot!=None: plot.addDataPoint('diff', frame, (frame-curInterval[1])*.01)
if len(stanceFoots)>0 and len(swingFoots)>0:
# step_cur = controlModel.getJointPositionGlobal(swingFoots[0]) - controlModel.getJointPositionGlobal(stanceFoots[0])
# step_tar = motion_seg[curInterval[1]].getJointPositionGlobal(swingFoots[0]) - motion_seg[curInterval[1]].getJointPositionGlobal(stanceFoots[0])
step_cur = controlModel.getJointPositionGlobal(0) - controlModel.getJointPositionGlobal(stanceFoots[0])
step_tar = motion_seg[curInterval[1]].getJointPositionGlobal(0) - motion_seg[curInterval[1]].getJointPositionGlobal(stanceFoots[0])
step_cur = mm.projectionOnPlane(step_cur, (1,0,0), (0,0,1))
step_tar = mm.projectionOnPlane(step_tar, (1,0,0), (0,0,1))
step_cur_sag, step_cur_cor = mm.projectionOnVector2(step_cur, direction)
step_tar_sag, step_tar_cor = mm.projectionOnVector2(step_tar, direction)
step_length_tar[0] = mm.length(step_tar_sag)
if np.inner(step_tar_sag, step_cur_sag) > 0:
step_length_cur[0] = mm.length(step_cur_sag)
else:
step_length_cur[0] = -mm.length(step_cur_sag)
step_axis[0] = directionAxis
# rd_vec1[0] = step_tar_sag
# rd_vecori1[0] = motion_seg[curInterval[1]].getJointPositionGlobal(stanceFoots[0])
# rd_vec2[0] = step_cur_sag
# rd_vecori2[0] = controlModel.getJointPositionGlobal(stanceFoots[0])
seg_index[0] += 1
curSeg = segments[seg_index[0]]
stl_y_limit_num[0] = 0
stl_xz_limit_num[0] = 0
del motion_seg_orig[frame+1:]
motion_seg_orig.extend(ymb.getAttachedNextMotion(curSeg, motion_seg_orig[-1], False, False))
del motion_seg[frame+1:]
del motion_stitch[frame+1:]
transitionLength = len(curSeg)-1
# motion_seg.extend(ymb.getAttachedNextMotion(curSeg, motion_seg[-1], False, False))
# motion_stitch.extend(ymb.getStitchedNextMotion(curSeg, motion_control[-1], transitionLength, stitch_func, True, False))
d = motion_seg[-1] - curSeg[0]
d.rootPos[1] = 0.
motion_seg.extend(ymb.getAttachedNextMotion(curSeg, d, True, False))
if NO_FOOT_SLIDING:
if segIndex == len(segments)-2:
Rl = motion_control[-1].getJointOrientationLocal(lUpLeg)
Rr = motion_control[-1].getJointOrientationLocal(rUpLeg)
Rlk = motion_control[-1].getJointOrientationLocal(lKnee)
Rrk = motion_control[-1].getJointOrientationLocal(rKnee)
Rlf = motion_control[-1].getJointOrientationLocal(lFoot)
Rrf = motion_control[-1].getJointOrientationLocal(rFoot)
for p in curSeg:
p.setJointOrientationLocal(lUpLeg, Rl, False)
p.setJointOrientationLocal(rUpLeg, Rr, False)
p.setJointOrientationLocal(lKnee, Rlk, False)
p.setJointOrientationLocal(rKnee, Rrk, False)
p.setJointOrientationLocal(lFoot, Rlf, False)
p.setJointOrientationLocal(rFoot, Rrf, False)
p.updateGlobalT()
d = motion_control[-1] - curSeg[0]
d.rootPos[1] = 0.
motion_stitch.extend(ymb.getStitchedNextMotion(curSeg, d, transitionLength, stitch_func, True, False))
# motion_seg.extend(ymb.getAttachedNextMotion(curSeg, motion_seg[-1], False, True))
# motion_stitch.extend(ymb.getStitchedNextMotion(curSeg, motion_control[-1], transitionLength, stitch_func, True, True))
else:
motion_seg_orig.append(motion_seg_orig[-1])
motion_seg.append(motion_seg[-1])
motion_stitch.append(motion_control[-1])
# rendering
motionModel.update(motion_ori[frame])
# motionModel.update(motion_seg[frame])
if SAVE_SIMULATION:
p_temp = ym.JointPosture(skeleton)
p_temp.initLocalRs()
p_temp.rootPos = controlModel.getJointPositionGlobal(0)
p_temp.setJointOrientationsLocal(controlModel.getJointOrientationsLocal())
motion_simulation.append(p_temp)
if frame == viewer.getMaxFrame():
saveFilePath = SAVE_DIR+'simulated_'+filename
yf.writeBvhFile(saveFilePath, motion_simulation)
print saveFilePath, 'saved'
viewer.setSimulateCallback(simulateCallback)
viewer.startTimer(frameTime / 1.4)
# viewer.startTimer(frameTime * .4)
viewer.show()
Fl.run()
def test_stitch_fix_foot():
bvhFilePath = '../samples/wd2_WalkSameSame00.bvh'
motion = yf.readBvhFile(bvhFilePath, .01)
print(motion[0].skeleton)
print()
hRef = .1
vRef = .3
lfoot = motion[0].skeleton.getElementIndex('LeftFoot')
rfoot = motion[0].skeleton.getElementIndex('RightFoot')
rtoe = motion[0].skeleton.getElementIndex('RightToes_Effector')
lc = yma.getElementContactStates(motion, lfoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rfoot, hRef, vRef)
intervals, states = yba.getBipedGaitIntervals(lc, rc, 10, .1)
segments = yma.splitMotionIntoSegments(motion, intervals)
print('wd2_WalkSameSame00')
print(intervals)
print([yba.GaitState.text[state] for state in states])
print()
shorten = 5
tlen = 10
transitionFunc = yfg.identity
motion_stitch = copy.copy(segments[0])
# just add
motion_stitch.extend(segments[1][1:])
# add shorter segment
motion_stitch.extend(segments[2][1:-shorten])
# stitch
motion_stitch_foot = copy.deepcopy(motion_stitch)
print('transition interval: %d~%d' %
(len(motion_stitch), len(motion_stitch) + tlen))
motion_stitch.extend(
ymb.getStitchedNextMotion(segments[3], motion_stitch[-1], tlen,
transitionFunc))
startFrame = len(motion_stitch_foot) - 1
motion_stitch_foot.extend(
ymb.getStitchedNextMotion(segments[3], motion_stitch_foot[-1],
tlen, transitionFunc))
fixPosition(motion_stitch_foot, rtoe, startFrame, startFrame + 4)
# just add remain parts
for i in range(4, len(segments)):
motion_stitch.extend(
ymb.getStitchedNextMotion(segments[i], motion_stitch[-1], tlen,
transitionFunc))
motion_stitch_foot.extend(
ymb.getStitchedNextMotion(segments[i], motion_stitch_foot[-1],
tlen, transitionFunc))
viewer = ysv.SimpleViewer()
viewer.record(False)
viewer.doc.addRenderer(
'ys_motion',
yr.JointMotionRenderer(motion, (0, 0, 255), yr.LINK_LINE))
viewer.doc.addObject('ys_motion', motion)
viewer.doc.addRenderer(
'motion_stitch',
yr.JointMotionRenderer(motion_stitch, (0, 255, 0), yr.LINK_LINE))
viewer.doc.addObject('motion_stitch', motion_stitch)
viewer.doc.addRenderer(
'motion_stitch_foot',
yr.JointMotionRenderer(motion_stitch_foot, (255, 255, 0),
yr.LINK_LINE))
viewer.doc.addObject('motion_stitch_foot', motion_stitch_foot)
viewer.startTimer(1 / 30.)
viewer.show()
Fl.run()
def push_simbicon_mass():
# Trunk 29.27
# Head 5.89
# Pelvis 16.61
# Thigh 8.35
# Shank 4.16
# Foot 1.34
# Arm 2.79
# Forearm 1.21
# Hand 0.55
class ForceInfo:
def __init__(self, startFrame, duration, force):
self.startFrame = startFrame # frame
self.duration = duration # sec
self.force = force # Newton
self.targetBody = None
#===============================================================================
# load motion
#===============================================================================
MULTI_VIEWER = False
CAMERA_TRACKING = True
TORQUE_PLOT = False
# global parameters
Kt = 60.; Dt = 2*(Kt**.5)
Ks = 4000.; Ds = 2*(Ks**.5)
K_stb_vel = .1
mu = 2.
# constaants
c_min_contact_vel = 100.
# c_min_contact_vel = 2.
c_min_contact_time = .7
c_landing_duration = .2
c_taking_duration = .3
# c_swf_mid_offset = .0
c_swf_mid_offset = .02
c_swf_stability = .5
c_locking_vel = .05
# c_swf_offset = .0
c_swf_offset = .01
# c_swf_offset = .005
K_stp_pos = 0.
# c5 = .5; c6 = .01
c5 = .5; c6 = .02
# c5 = .5; c6 = .05
# c5 = 1.; c6 = .05
# c5 = .0; c6 = .0
K_stb_vel = .1
K_stb_pos = .1
OLD_SWING_HEIGHT = False
# OLD_SWING_HEIGHT = True
HIGHER_OFFSET = True
# HIGHER_OFFSET = False
dir = './ppmotion/'
# max push
# forceInfos = []
# maximum
# forceInfos = [ForceInfo(4*i*30, .4, (160,0,0)) for i in range(2,12)]
# forceInfos = [ForceInfo(4*i*30, .4, (-130,0,0)) for i in range(2,12)]
# forceInfos = [ForceInfo(4*i*30, .4, (0,0,80)) for i in range(2,12)]
forceInfos = [ForceInfo(4*i*30+1, .4, (0,0,-105)) for i in range(2,12)]
# # maximum with more checking
# forceInfos = [ForceInfo(4*i*30, .4, (145,0,0)) for i in range(2,12)]
# forceInfos = [ForceInfo(4*i*30+1, .4, (-120,0,0)) for i in range(2,12)]
# forceInfos = [ForceInfo(4*i*30+1, .4, (0,0,80)) for i in range(2,12)]
# forceInfos = [ForceInfo(4*i*30, .4, (0,0,-105)) for i in range(2,12)]
# # for video
# forceInfos = [ForceInfo(4*i*30+2, .4, (160,0,0)) for i in range(2,4)] \
# + [ForceInfo(4*i*30+2, .4, (0,0,-105)) for i in range(4,6)] \
# + [ForceInfo(4*i*30+2, .4, (-130,0,0)) for i in range(6,8)] \
# + [ForceInfo(4*i*30+2, .4, (0,0,80)) for i in range(8,10)]
# Kt = 40.; Dt = 2*(Kt**.5)
# Ks = 3000.; Ds = 2*(Ks**.5)
# mu = 1.
# c_swf_mid_offset = .04
# K_swp_vel_sag = .0; K_swp_vel_sag_faster = .0;
# K_swp_pos_sag = 1.5; K_swp_pos_sag_faster = .1;
# K_swp_vel_cor = .25; K_swp_pos_cor = .3
# K_stp_pos = 0.
# K_stb_vel = .02
# K_stb_pos = .15
Kt = 40.; Dt = 2*(Kt**.5)
Ks = 3000.; Ds = 2*(Ks**.5)
mu = 1.5
c_swf_mid_offset = .04
K_swp_vel_sag = .05; K_swp_vel_sag_faster = .0;
K_swp_pos_sag = 1.7; K_swp_pos_sag_faster = .1;
K_swp_vel_cor = .25; K_swp_pos_cor = .3
# K_stb_vel = .02
# K_stb_pos = .15
filename = 'wd2_WalkSameSame01_REPEATED.bvh'
motion_ori = yf.readBvhFile(dir+filename)
frameTime = 1/motion_ori.fps
if 'REPEATED' in filename:
REPEATED = True
CAMERA_TRACKING = True
else:
REPEATED = False
#===============================================================================
# options
#===============================================================================
SEGMENT_EDITING = True
STANCE_FOOT_STABILIZE = True
MATCH_STANCE_LEG = True
SWING_FOOT_PLACEMENT = True
SWING_FOOT_HEIGHT = True
if '_FOOT' in filename:
SWING_FOOT_ORIENTATION = True
else:
SWING_FOOT_ORIENTATION = False
STANCE_FOOT_PUSH = True
STANCE_FOOT_BALANCING = True
stitch_func = lambda x : 1. - yfg.hermite2nd(x)
stf_stabilize_func = yfg.concatenate([yfg.hermite2nd, yfg.one], [c_landing_duration])
match_stl_func = yfg.hermite2nd
# match_stl_func_y = yfg.hermite2nd
swf_placement_func = yfg.hermite2nd
swf_height_func = yfg.hermite2nd
swf_height_sine_func = yfg.sine
# stf_balancing_func = yfg.concatenate([yfg.hermite2nd, yfg.one], [c_landing_duration])
stf_balancing_func = yfg.hermite2nd
#===============================================================================
# initialize character
#===============================================================================
# mcfgfile = open(dir + 'mcfg', 'r')
mcfgfile = open('mcfg_simbicon', 'r')
mcfg = cPickle.load(mcfgfile)
mcfgfile.close()
wcfg = ypc.WorldConfig()
wcfg.planeHeight = 0.
wcfg.useDefaultContactModel = False
wcfg.lockingVel = c_locking_vel
stepsPerFrame = 30
wcfg.timeStep = (frameTime)/stepsPerFrame
vpWorld = cvw.VpWorld(wcfg)
motionModel = cvm.VpMotionModel(vpWorld, motion_ori[0], mcfg)
controlModel = cvm.VpControlModel(vpWorld, motion_ori[0], mcfg)
vpWorld.initialize()
print controlModel
motionModel.recordVelByFiniteDiff()
controlModel.initializeHybridDynamics()
#===============================================================================
# load segment info
#===============================================================================
skeleton = motion_ori[0].skeleton
segname = os.path.splitext(filename)[0]+'.seg'
segfile = open(dir+segname, 'r')
seginfo = cPickle.load(segfile)
segfile.close()
intervals = [info['interval'] for info in seginfo]
states = [info['state'] for info in seginfo]
temp_motion = copy.deepcopy(motion_ori)
segments = yma.splitMotionIntoSegments(temp_motion, intervals)
print len(intervals), 'segments'
for i in range(len(intervals)):
print '%dth'%i, yba.GaitState.text[states[i]], intervals[i], ',',
print
motion_seg_orig = ym.JointMotion()
motion_seg_orig += segments[0]
motion_seg = ym.JointMotion()
motion_seg += segments[0]
motion_stitch = ym.JointMotion()
motion_stitch += segments[0]
motion_stf_stabilize = ym.JointMotion()
motion_match_stl = ym.JointMotion()
motion_swf_placement = ym.JointMotion()
motion_swf_height = ym.JointMotion()
motion_swf_orientation = ym.JointMotion()
motion_stf_balancing = ym.JointMotion()
motion_stf_push = ym.JointMotion()
motion_control = ym.JointMotion()
motion_debug1 = ym.JointMotion()
motion_debug2 = ym.JointMotion()
motion_debug3 = ym.JointMotion()
P = ym.JointMotion()
P_hat = ym.JointMotion()
M_tc = ym.JointMotion()
M_hat_tc_1 = ym.JointMotion()
#===============================================================================
# loop variable
#===============================================================================
seg_index = [0]
acc_offset = [0]
extended = [False]
prev_R_swp = [None]
stl_y_limit_num = [0]
stl_xz_limit_num = [0]
avg_dCM = [mm.O_Vec3()]
# avg_stf_v = [mm.O_Vec3()]
# avg_stf_av = [mm.O_Vec3()]
# stf_push_func = [yfg.zero]
step_length_cur = [0.]
step_length_tar = [0.]
step_axis = [mm.O_Vec3()]
#===============================================================================
# information
#===============================================================================
bodyIDsToCheck = range(vpWorld.getBodyNum())
mus = [mu]*len(bodyIDsToCheck)
bodyMasses = controlModel.getBodyMasses()
totalMass = controlModel.getTotalMass()
lID = controlModel.name2id('LeftFoot'); rID = controlModel.name2id('RightFoot')
lUpLeg = skeleton.getJointIndex('LeftUpLeg');rUpLeg = skeleton.getJointIndex('RightUpLeg')
lKnee = skeleton.getJointIndex('LeftLeg'); rKnee = skeleton.getJointIndex('RightLeg')
lFoot = skeleton.getJointIndex('LeftFoot'); rFoot = skeleton.getJointIndex('RightFoot')
spine = skeleton.getJointIndex('Spine')
uppers = [skeleton.getJointIndex(name) for name in ['Hips', 'Spine', 'Spine1', 'LeftArm', 'LeftForeArm', 'RightArm', 'RightForeArm']]
upperMass = sum([bodyMasses[i] for i in uppers])
lLegs = [skeleton.getJointIndex(name) for name in ['LeftUpLeg', 'LeftLeg', 'LeftFoot']]
rLegs = [skeleton.getJointIndex(name) for name in ['RightUpLeg', 'RightLeg', 'RightFoot']]
allJoints = set(range(skeleton.getJointNum()))
halfFootHeight = controlModel.getBodyShape(lFoot)[1] / 2.
for fi in forceInfos:
fi.targetBody = spine
#===========================================================================
# data collection
#===========================================================================
rhip_torques = []
rknee_torques = []
rankle_torques = []
#===============================================================================
# rendering
#===============================================================================
rd_CM = [None]; rd_CP = [None]; rd_CMP = [None]
rd_forces = [None]; rd_force_points = [None]
rd_torques = []; rd_joint_positions = []
rd_point1 = [None]
rd_point2 = [None]
rd_vec1 = [None]; rd_vecori1 = [None]
rd_vec2 = [None]; rd_vecori2 = [None]
rd_frame1 = [None]
rd_frame2 = [None]
if MULTI_VIEWER:
viewer = ymv.MultiViewer(800, 655, True, wheelWork=True)
# viewer = ymv.MultiViewer(1600, 1255)
viewer.setRenderers1([cvr.VpModelRenderer(motionModel, MOTION_COLOR, yr.POLYGON_FILL)])
viewer.setRenderers2([cvr.VpModelRenderer(controlModel, CHARACTER_COLOR, yr.POLYGON_FILL),
yr.ForcesRenderer(rd_forces, rd_force_points, (255,0,0), ratio=.01, lineWidth=.04, fromPoint=False)])
# viewer.glWindow2.groundOffset[0] -= 10
viewer.glWindow2.groundSize = 100
else:
viewer = ysv.SimpleViewer()
# viewer.record(False)
# viewer.doc.addRenderer('motionModel', cvr.VpModelRenderer(motionModel, (0,150,255), yr.POLYGON_LINE))
viewer.doc.addRenderer('controlModel', cvr.VpModelRenderer(controlModel, (200,200,200), yr.POLYGON_LINE))
# viewer.doc.addObject('motion_ori', motion_ori)
# viewer.doc.addRenderer('motion_ori', yr.JointMotionRenderer(motion_ori, (0,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_seg_orig', yr.JointMotionRenderer(motion_seg_orig, (0,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_seg', yr.JointMotionRenderer(motion_seg, (0,150,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stitch', yr.JointMotionRenderer(motion_stitch, (0,255,200), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stf_stabilize', yr.JointMotionRenderer(motion_stf_stabilize, (255,0,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_match_stl', yr.JointMotionRenderer(motion_match_stl, (255,200,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_swf_placement', yr.JointMotionRenderer(motion_swf_placement, (255,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_swf_height', yr.JointMotionRenderer(motion_swf_height, (50,255,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_swf_orientation', yr.JointMotionRenderer(motion_swf_orientation, (255,100,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stf_push', yr.JointMotionRenderer(motion_stf_push, (50,255,200), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_stf_balancing', yr.JointMotionRenderer(motion_stf_balancing, (255,100,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_control', yr.JointMotionRenderer(motion_control, (255,0,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_debug1', yr.JointMotionRenderer(motion_debug1, (0,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_debug2', yr.JointMotionRenderer(motion_debug2, (255,0,255), yr.LINK_BONE))
# viewer.doc.addRenderer('motion_debug3', yr.JointMotionRenderer(motion_debug3, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('M_tc', yr.JointMotionRenderer(M_tc, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('P_hat', yr.JointMotionRenderer(P_hat, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('P', yr.JointMotionRenderer(P, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('M_hat_tc_1', yr.JointMotionRenderer(M_hat_tc_1, (255,255,0), yr.LINK_BONE))
# viewer.doc.addRenderer('rd_CM', yr.PointsRenderer(rd_CM, (255,255,0)))
# viewer.doc.addRenderer('rd_CP', yr.PointsRenderer(rd_CP, (255,0,0)))
# viewer.doc.addRenderer('rd_CMP', yr.PointsRenderer(rd_CMP, (0,255,0)))
viewer.doc.addRenderer('forces', yr.ForcesRenderer(rd_forces, rd_force_points, (255,0,0), ratio=.01, lineWidth=.04, fromPoint=False))
# viewer.doc.addRenderer('torques', yr.VectorsRenderer(rd_torques, rd_joint_positions, (255,0,0)))
# viewer.doc.addRenderer('rd_point1', yr.PointsRenderer(rd_point1, (0,255,0)))
# viewer.doc.addRenderer('rd_point2', yr.PointsRenderer(rd_point2, (255,0,0)))
# viewer.doc.addRenderer('rd_vec1', yr.VectorsRenderer(rd_vec1, rd_vecori1, (255,0,0)))
# viewer.doc.addRenderer('rd_vec2', yr.VectorsRenderer(rd_vec2, rd_vecori2, (0,255,0)))
# viewer.doc.addRenderer('rd_frame1', yr.FramesRenderer(rd_frame1, (0,200,200)))
# viewer.doc.addRenderer('rd_frame2', yr.FramesRenderer(rd_frame2, (200,200,0)))
# viewer.setMaxFrame(len(motion_ori)-1)
if not REPEATED:
viewer.setMaxFrame(len(motion_ori)-1)
else:
viewer.setMaxFrame(1440)
if CAMERA_TRACKING:
if MULTI_VIEWER:
cameraTargets1 = [None] * (viewer.getMaxFrame()+1)
cameraTargets2 = [None] * (viewer.getMaxFrame()+1)
else:
cameraTargets = [None] * (viewer.getMaxFrame()+1)
if TORQUE_PLOT:
rhip_torques = [0.]*viewer.getMaxFrame()
rknee_torques = [0.]*viewer.getMaxFrame()
rankle_torques = [0.]*viewer.getMaxFrame()
pt = [0.]
def postFrameCallback_Always(frame):
if frame==1: pt[0] = time.time()
if frame==31: print 'elapsed time for 30 frames:', time.time()-pt[0]
if CAMERA_TRACKING:
if MULTI_VIEWER:
if cameraTargets1[frame]==None:
cameraTargets1[frame] = motionModel.getBodyPositionGlobal(0)
# cameraTargets1[frame] = motion_ori[frame].getJointPositionGlobal(0)
viewer.setCameraTarget1(cameraTargets1[frame])
if cameraTargets2[frame]==None:
cameraTargets2[frame] = controlModel.getJointPositionGlobal(0)
viewer.setCameraTarget2(cameraTargets2[frame])
else:
if cameraTargets[frame]==None:
cameraTargets[frame] = controlModel.getJointPositionGlobal(0)
viewer.setCameraTarget(cameraTargets[frame])
if plot!=None:
plot.updateVline(frame)
viewer.setPostFrameCallback_Always(postFrameCallback_Always)
plot = None
# plot = ymp.InteractivePlot()
if plot!=None:
plot.setXlimit(0, len(motion_ori))
plot.setYlimit(0., 1.)
plot.addDataSet('zero')
plot.addDataSet('diff')
plot.addDataSet('debug1')
plot.addDataSet('debug2')
def viewer_onClose(data):
if plot!=None:
plot.close()
viewer.onClose(data)
viewer.callback(viewer_onClose)
def simulateCallback(frame):
# seginfo
segIndex = seg_index[0]
curState = seginfo[segIndex]['state']
curInterval = yma.offsetInterval(acc_offset[0], seginfo[segIndex]['interval'])
stanceLegs = seginfo[segIndex]['stanceHips']
swingLegs = seginfo[segIndex]['swingHips']
stanceFoots = seginfo[segIndex]['stanceFoots']
swingFoots = seginfo[segIndex]['swingFoots']
swingKnees = seginfo[segIndex]['swingKnees']
groundHeight = seginfo[segIndex]['ground_height']
# maxStfPushFrame = seginfo[segIndex]['max_stf_push_frame']
prev_frame = frame-1 if frame>0 else 0
# prev_frame = frame
# information
# dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(frame), bodyMasses, upperMass, uppers)
# CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(frame), bodyMasses, upperMass, uppers)
## dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(frame), bodyMasses, totalMass)
## CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(frame), bodyMasses, totalMass)
# stf_tar = motion_seg.getJointPositionGlobal(stanceFoots[0], frame)
# CMr_tar = CM_tar - stf_tar
dCM_tar = motion_seg.getJointVelocityGlobal(0, prev_frame)
CM_tar = motion_seg.getJointPositionGlobal(0, prev_frame)
# dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(prev_frame), bodyMasses, upperMass, uppers)
# CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(prev_frame), bodyMasses, upperMass, uppers)
# dCM_tar = yrp.getCM(motion_seg.getJointVelocitiesGlobal(prev_frame), bodyMasses, totalMass)
# CM_tar = yrp.getCM(motion_seg.getJointPositionsGlobal(prev_frame), bodyMasses, totalMass)
stf_tar = motion_seg.getJointPositionGlobal(stanceFoots[0], prev_frame)
CMr_tar = CM_tar - stf_tar
dCM = avg_dCM[0]
CM = controlModel.getJointPositionGlobal(0)
# CM = yrp.getCM(controlModel.getJointPositionsGlobal(), bodyMasses, upperMass, uppers)
# CM = yrp.getCM(controlModel.getJointPositionsGlobal(), bodyMasses, totalMass)
CMreal = yrp.getCM(controlModel.getJointPositionsGlobal(), bodyMasses, totalMass)
stf = controlModel.getJointPositionGlobal(stanceFoots[0])
CMr = CM - stf
diff_dCM = mm.projectionOnPlane(dCM-dCM_tar, (1,0,0), (0,0,1))
diff_dCM_axis = np.cross((0,1,0), diff_dCM)
rd_vec1[0] = diff_dCM; rd_vecori1[0] = CM_tar
diff_CMr = mm.projectionOnPlane(CMr-CMr_tar, (1,0,0), (0,0,1))
# rd_vec1[0] = diff_CMr; rd_vecori1[0] = stf_tar
diff_CMr_axis = np.cross((0,1,0), diff_CMr)
direction = mm.normalize2(mm.projectionOnPlane(dCM_tar, (1,0,0), (0,0,1)))
# direction = mm.normalize2(mm.projectionOnPlane(dCM, (1,0,0), (0,0,1)))
directionAxis = np.cross((0,1,0), direction)
diff_dCM_sag, diff_dCM_cor = mm.projectionOnVector2(diff_dCM, direction)
# rd_vec1[0] = diff_dCM_sag; rd_vecori1[0] = CM_tar
diff_dCM_sag_axis = np.cross((0,1,0), diff_dCM_sag)
diff_dCM_cor_axis = np.cross((0,1,0), diff_dCM_cor)
diff_CMr_sag, diff_CMr_cor = mm.projectionOnVector2(diff_CMr, direction)
diff_CMr_sag_axis = np.cross((0,1,0), diff_CMr_sag)
diff_CMr_cor_axis = np.cross((0,1,0), diff_CMr_cor)
t = (frame-curInterval[0])/float(curInterval[1]-curInterval[0])
t_raw = t
if t>1.: t=1.
p_root = motion_stitch[frame].getJointPositionGlobal(0)
R_root = motion_stitch[frame].getJointOrientationGlobal(0)
motion_seg_orig.goToFrame(frame)
motion_seg.goToFrame(frame)
motion_stitch.goToFrame(frame)
motion_debug1.append(motion_stitch[frame].copy())
motion_debug1.goToFrame(frame)
motion_debug2.append(motion_stitch[frame].copy())
motion_debug2.goToFrame(frame)
motion_debug3.append(motion_stitch[frame].copy())
motion_debug3.goToFrame(frame)
# paper implementation
M_tc.append(motion_stitch[prev_frame])
M_tc.goToFrame(frame)
P_hat.append(M_tc[frame].copy())
P_hat.goToFrame(frame)
p_temp = ym.JointPosture(skeleton)
p_temp.rootPos = controlModel.getJointPositionGlobal(0)
p_temp.setJointOrientationsLocal(controlModel.getJointOrientationsLocal())
P.append(p_temp)
P.goToFrame(frame)
# stance foot stabilize
motion_stf_stabilize.append(motion_stitch[frame].copy())
motion_stf_stabilize.goToFrame(frame)
if STANCE_FOOT_STABILIZE:
for stanceFoot in stanceFoots:
R_target_foot = motion_seg[frame].getJointOrientationGlobal(stanceFoot)
R_current_foot = motion_stf_stabilize[frame].getJointOrientationGlobal(stanceFoot)
motion_stf_stabilize[frame].setJointOrientationGlobal(stanceFoot, cm.slerp(R_current_foot, R_target_foot , stf_stabilize_func(t)))
# R_target_foot = motion_seg[frame].getJointOrientationLocal(stanceFoot)
# R_current_foot = motion_stf_stabilize[frame].getJointOrientationLocal(stanceFoot)
# motion_stf_stabilize[frame].setJointOrientationLocal(stanceFoot, cm.slerp(R_current_foot, R_target_foot , stf_stabilize_func(t)))
# match stance leg
motion_match_stl.append(motion_stf_stabilize[frame].copy())
motion_match_stl.goToFrame(frame)
if MATCH_STANCE_LEG:
if curState!=yba.GaitState.STOP:
for i in range(len(stanceLegs)):
stanceLeg = stanceLegs[i]
stanceFoot = stanceFoots[i]
# # motion stance leg -> character stance leg as time goes
R_motion = motion_match_stl[frame].getJointOrientationGlobal(stanceLeg)
R_character = controlModel.getJointOrientationGlobal(stanceLeg)
motion_match_stl[frame].setJointOrientationGlobal(stanceLeg, cm.slerp(R_motion, R_character, match_stl_func(t)))
# t_y = match_stl_func_y(t)
# t_xz = match_stl_func(t)
#
# R_motion = motion_match_stl[frame].getJointOrientationGlobal(stanceLeg)
# R_character = controlModel.getJointOrientationGlobal(stanceLeg)
# R = np.dot(R_character, R_motion.T)
# R_y, R_xz = mm.projectRotation((0,1,0), R)
# motion_match_stl[frame].mulJointOrientationGlobal(stanceLeg, mm.scaleSO3(R_xz, t_xz))
# motion_match_stl[frame].mulJointOrientationGlobal(stanceLeg, mm.scaleSO3(R_y, t_y))
# swing foot placement
motion_swf_placement.append(motion_match_stl[frame].copy())
motion_swf_placement.goToFrame(frame)
if SWING_FOOT_PLACEMENT:
t_swing_foot_placement = swf_placement_func(t);
if extended[0]:
R_swp_sag = prev_R_swp[0][0]
R_swp_cor = prev_R_swp[0][1]
else:
R_swp_sag = mm.I_SO3(); R_swp_cor = mm.I_SO3()
R_swp_cor = np.dot(R_swp_cor, mm.exp(diff_dCM_cor_axis * K_swp_vel_cor * -t_swing_foot_placement))
if np.dot(direction, diff_CMr_sag) < 0:
R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_dCM_sag_axis * K_swp_vel_sag * -t_swing_foot_placement))
R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_CMr_sag_axis * K_swp_pos_sag * -t_swing_foot_placement))
else:
R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_dCM_sag_axis * K_swp_vel_sag_faster * -t_swing_foot_placement))
R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_CMr_sag_axis * K_swp_pos_sag_faster * -t_swing_foot_placement))
R_swp_cor = np.dot(R_swp_cor, mm.exp(diff_CMr_cor_axis * K_swp_pos_cor * -t_swing_foot_placement))
for i in range(len(swingLegs)):
swingLeg = swingLegs[i]
swingFoot = swingFoots[i]
# save swing foot global orientation
# R_swf = motion_swf_placement[frame].getJointOrientationGlobal(swingFoot)
# rotate swing leg
motion_swf_placement[frame].mulJointOrientationGlobal(swingLeg, R_swp_sag)
motion_swf_placement[frame].mulJointOrientationGlobal(swingLeg, R_swp_cor)
# restore swing foot global orientation
# motion_swf_placement[frame].setJointOrientationGlobal(swingFoot, R_swf)
prev_R_swp[0] = (R_swp_sag, R_swp_cor)
# swing foot height
motion_swf_height.append(motion_swf_placement[frame].copy())
motion_swf_height.goToFrame(frame)
if SWING_FOOT_HEIGHT:
for swingFoot in swingFoots:
stanceFoot = stanceFoots[0]
# save foot global orientation
R_foot = motion_swf_height[frame].getJointOrientationGlobal(swingFoot)
R_stance_foot = motion_swf_height[frame].getJointOrientationGlobal(stanceFoot)
if OLD_SWING_HEIGHT:
height_tar = motion_swf_height[frame].getJointPositionGlobal(swingFoot)[1] - motion_swf_height[frame].getJointPositionGlobal(stanceFoot)[1]
else:
height_tar = motion_swf_height[prev_frame].getJointPositionGlobal(swingFoot)[1] - groundHeight
d_height_tar = motion_swf_height.getJointVelocityGlobal(swingFoot, prev_frame)[1]
# height_tar += c_swf_mid_offset * swf_height_sine_func(t)
# motion_debug1[frame] = motion_swf_height[frame].copy()
# rotate
motion_swf_height[frame].rotateByTarget(controlModel.getJointOrientationGlobal(0))
# motion_debug2[frame] = motion_swf_height[frame].copy()
# motion_debug2[frame].translateByTarget(controlModel.getJointPositionGlobal(0))
if OLD_SWING_HEIGHT:
height_cur = motion_swf_height[frame].getJointPositionGlobal(swingFoot)[1] - motion_swf_height[frame].getJointPositionGlobal(stanceFoot)[1]
else:
height_cur = controlModel.getJointPositionGlobal(swingFoot)[1] - halfFootHeight - c_swf_offset
d_height_cur = controlModel.getJointVelocityGlobal(swingFoot)[1]
if OLD_SWING_HEIGHT:
offset_height = (height_tar - height_cur) * swf_height_func(t) * c5
else:
offset_height = ((height_tar - height_cur) * c5
+ (d_height_tar - d_height_cur) * c6) * swf_height_func(t)
offset_sine = c_swf_mid_offset * swf_height_sine_func(t)
# offset_sine = 0.
offset = 0.
offset += offset_height
offset += offset_sine
if offset > 0.:
newPosition = motion_swf_height[frame].getJointPositionGlobal(swingFoot)
newPosition[1] += offset
aik.ik_analytic(motion_swf_height[frame], swingFoot, newPosition)
else:
if HIGHER_OFFSET:
newPosition = motion_swf_height[frame].getJointPositionGlobal(stanceFoot)
newPosition[1] -= offset
aik.ik_analytic(motion_swf_height[frame], stanceFoot, newPosition)
# return
# motion_debug3[frame] = motion_swf_height[frame].copy()
# motion_debug3[frame].translateByTarget(controlModel.getJointPositionGlobal(0))
motion_swf_height[frame].rotateByTarget(R_root)
# restore foot global orientation
motion_swf_height[frame].setJointOrientationGlobal(swingFoot, R_foot)
motion_swf_height[frame].setJointOrientationGlobal(stanceFoot, R_stance_foot)
if plot!=None:
plot.addDataPoint('debug1', frame, offset_height)
plot.addDataPoint('debug2', frame, height_tar - height_cur)
# plot.addDataPoint('diff', frame, diff)
# swing foot orientation
motion_swf_orientation.append(motion_swf_height[frame].copy())
motion_swf_orientation.goToFrame(frame)
if SWING_FOOT_ORIENTATION:
swf_orientation_func = yfg.concatenate([yfg.zero, yfg.hermite2nd, yfg.one], [.25, .75])
for swingFoot in swingFoots:
R_target_foot = motion_seg[curInterval[1]].getJointOrientationGlobal(swingFoot)
R_current_foot = motion_swf_orientation[frame].getJointOrientationGlobal(swingFoot)
motion_swf_orientation[frame].setJointOrientationGlobal(swingFoot, cm.slerp(R_current_foot, R_target_foot, swf_orientation_func(t)))
# swf_stabilize_func = yfg.concatenate([yfg.hermite2nd, yfg.one], [c_taking_duration])
# push orientation
# for swingFoot in swingFoots:
# R_target_foot = motion_seg[frame].getJointOrientationGlobal(swingFoot)
# R_current_foot = motion_swf_orientation[frame].getJointOrientationGlobal(swingFoot)
# motion_swf_orientation[frame].setJointOrientationGlobal(swingFoot, cm.slerp(R_current_foot, R_target_foot , swf_stabilize_func(t)))
# stance foot push
motion_stf_push.append(motion_swf_orientation[frame].copy())
motion_stf_push.goToFrame(frame)
if STANCE_FOOT_PUSH:
for swingFoot in swingFoots:
# max_t = (maxStfPushFrame)/float(curInterval[1]-curInterval[0])
# stf_push_func = yfg.concatenate([yfg.sine, yfg.zero], [max_t*2])
stf_push_func = yfg.concatenate([yfg.sine, yfg.zero], [c_taking_duration*2])
R_swp_sag = mm.I_SO3()
# R_swp_sag = np.dot(R_swp_sag, mm.exp(diff_dCM_sag_axis * K_stp_vel * -stf_push_func(t)))
# if step_length_cur[0] < step_length_tar[0]:
# ratio = step_length_cur[0] / step_length_tar[0]
# R_max = maxmaxStfPushFrame
# R_zero =
R_swp_sag = np.dot(R_swp_sag, mm.exp((step_length_tar[0] - step_length_cur[0])*step_axis[0] * K_stp_pos * -stf_push_func(t)))
motion_stf_push[frame].mulJointOrientationGlobal(swingFoot, R_swp_sag)
# stance foot balancing
motion_stf_balancing.append(motion_stf_push[frame].copy())
motion_stf_balancing.goToFrame(frame)
if STANCE_FOOT_BALANCING:
R_stb = mm.exp(diff_dCM_axis * K_stb_vel * stf_balancing_func(t))
R_stb = np.dot(R_stb, mm.exp(diff_CMr_axis * K_stb_pos * stf_balancing_func(t)))
for stanceFoot in stanceFoots:
if frame < 5: continue
motion_stf_balancing[frame].mulJointOrientationGlobal(stanceFoot, R_stb)
# control trajectory
motion_control.append(motion_stf_balancing[frame].copy())
motion_control.goToFrame(frame)
#=======================================================================
# tracking with inverse dynamics
#=======================================================================
th_r = motion_control.getDOFPositions(frame)
th = controlModel.getDOFPositions()
dth_r = motion_control.getDOFVelocities(frame)
dth = controlModel.getDOFVelocities()
ddth_r = motion_control.getDOFAccelerations(frame)
ddth_des = yct.getDesiredDOFAccelerations(th_r, th, dth_r, dth, ddth_r, Kt, Dt)
#=======================================================================
# simulation
#=======================================================================
CP = mm.v3(0.,0.,0.)
F = mm.v3(0.,0.,0.)
avg_dCM[0] = mm.v3(0.,0.,0.)
# external force rendering info
del rd_forces[:]; del rd_force_points[:]
for fi in forceInfos:
if fi.startFrame <= frame and frame < fi.startFrame + fi.duration*(1/frameTime):
rd_forces.append(fi.force)
rd_force_points.append(controlModel.getBodyPositionGlobal(fi.targetBody) + -mm.normalize2(fi.force)*.2)
for i in range(stepsPerFrame):
bodyIDs, contactPositions, contactPositionLocals, contactForces = vpWorld.calcPenaltyForce(bodyIDsToCheck, mus, Ks, Ds)
vpWorld.applyPenaltyForce(bodyIDs, contactPositionLocals, contactForces)
# apply external force
for fi in forceInfos:
if fi.startFrame <= frame and frame < fi.startFrame + fi.duration*(1/frameTime):
controlModel.applyBodyForceGlobal(fi.targetBody, fi.force)
controlModel.setDOFAccelerations(ddth_des)
controlModel.solveHybridDynamics()
# # apply external force
# for fi in forceInfos:
# if fi.startFrame <= frame and frame < fi.startFrame + fi.duration*(1/frameTime):
# controlModel.applyBodyForceGlobal(fi.targetBody, fi.force)
vpWorld.step()
# yvu.align2D(controlModel)
if len(contactForces) > 0:
CP += yrp.getCP(contactPositions, contactForces)
F += sum(contactForces)
avg_dCM[0] += controlModel.getJointVelocityGlobal(0)
# avg_dCM[0] += yrp.getCM(controlModel.getJointVelocitiesGlobal(), bodyMasses, upperMass, uppers)
# avg_dCM[0] += yrp.getCM(controlModel.getJointVelocitiesGlobal(), bodyMasses, totalMass)
# if len(stanceFoots)>0:
# avg_stf_v[0] += controlModel.getJointVelocityGlobal(stanceFoots[0])
# avg_stf_av[0] += controlModel.getJointAngVelocityGlobal(stanceFoots[0])
CP /= stepsPerFrame
F /= stepsPerFrame
avg_dCM[0] /= stepsPerFrame
# if len(stanceFoots)>0:
# avg_stf_v[0] /= stepsPerFrame
# avg_stf_av[0] /= stepsPerFrame
# rd_vec1[0] = avg_stf_av[0]; rd_vec1[0][0] = 0.; rd_vec1[0][2] = 0.
# rd_vecori1[0]= controlModel.getJointPositionGlobal(stanceFoots[0])
#=======================================================================
# segment editing
#=======================================================================
lastFrame = False
if SEGMENT_EDITING:
if curState==yba.GaitState.STOP:
if frame == len(motion_seg)-1:
lastFrame = True
elif (curState==yba.GaitState.LSWING or curState==yba.GaitState.RSWING) and t>c_min_contact_time:
swingID = lID if curState==yba.GaitState.LSWING else rID
contact = False
if swingID in bodyIDs:
minContactVel = 1000.
for i in range(len(bodyIDs)):
if bodyIDs[i]==swingID:
vel = controlModel.getBodyVelocityGlobal(swingID, contactPositionLocals[i])
vel[1] = 0
contactVel = mm.length(vel)
if contactVel < minContactVel: minContactVel = contactVel
if minContactVel < c_min_contact_vel: contact = True
extended[0] = False
if contact:
# print frame, 'foot touch'
lastFrame = True
acc_offset[0] += frame - curInterval[1]
elif frame == len(motion_seg)-1:
print frame, 'extend frame', frame+1
preserveJoints = []
# preserveJoints = [lFoot, rFoot]
# preserveJoints = [lFoot, rFoot, lKnee, rKnee]
# preserveJoints = [lFoot, rFoot, lKnee, rKnee, lUpLeg, rUpLeg]
stanceKnees = [rKnee] if curState==yba.GaitState.LSWING else [lKnee]
preserveJoints = [stanceFoots[0], stanceKnees[0], stanceLegs[0]]
diff = 3
motion_seg_orig.extend([motion_seg_orig[-1]])
motion_seg.extend(ymt.extendByIntegration_root(motion_seg, 1, diff))
motion_stitch.extend(ymt.extendByIntegration_constant(motion_stitch, 1, preserveJoints, diff))
# # extend for swing foot ground speed matching & swing foot height lower
## extendedPostures = ymt.extendByIntegration(motion_stitch, 1, preserveJoints, diff)
## extendedPostures = [motion_stitch[-1]]
##
# extendFrameNum = frame - curInterval[1] + 1
# k = 1.-extendFrameNum/5.
# if k<0.: k=0.
# extendedPostures = ymt.extendByIntegrationAttenuation(motion_stitch, 1, preserveJoints, diff, k)
#
## if len(swingFoots)>0 and np.inner(dCM_tar, dCM)>0.:
## print frame, 'speed matching'
## R_swf = motion_stitch[-1].getJointOrientationGlobal(swingFoots[0])
##
## p_swf = motion_stitch[-1].getJointPositionGlobal(swingFoots[0])
## v_swf = motion_stitch.getJointVelocityGlobal(swingFoots[0], frame-diff, frame)
## a_swf = motion_stitch.getJointAccelerationGlobal(swingFoots[0], frame-diff, frame)
## p_swf += v_swf * (frameTime) + a_swf * (frameTime)*(frameTime)
## aik.ik_analytic(extendedPostures[0], swingFoots[0], p_swf)
##
## extendedPostures[0].setJointOrientationGlobal(swingFoots[0], R_swf)
#
# motion_stitch.extend(extendedPostures)
extended[0] = True
else:
if frame == len(motion_seg)-1: lastFrame = True
if lastFrame:
if segIndex < len(segments)-1:
print '%d (%d): end of %dth seg (%s, %s)'%(frame, frame-curInterval[1],segIndex, yba.GaitState.text[curState], curInterval)
if plot!=None: plot.addDataPoint('diff', frame, (frame-curInterval[1])*.01)
if len(stanceFoots)>0 and len(swingFoots)>0:
# step_cur = controlModel.getJointPositionGlobal(swingFoots[0]) - controlModel.getJointPositionGlobal(stanceFoots[0])
# step_tar = motion_seg[curInterval[1]].getJointPositionGlobal(swingFoots[0]) - motion_seg[curInterval[1]].getJointPositionGlobal(stanceFoots[0])
step_cur = controlModel.getJointPositionGlobal(0) - controlModel.getJointPositionGlobal(stanceFoots[0])
step_tar = motion_seg[curInterval[1]].getJointPositionGlobal(0) - motion_seg[curInterval[1]].getJointPositionGlobal(stanceFoots[0])
step_cur = mm.projectionOnPlane(step_cur, (1,0,0), (0,0,1))
step_tar = mm.projectionOnPlane(step_tar, (1,0,0), (0,0,1))
step_cur_sag, step_cur_cor = mm.projectionOnVector2(step_cur, direction)
step_tar_sag, step_tar_cor = mm.projectionOnVector2(step_tar, direction)
step_length_tar[0] = mm.length(step_tar_sag)
if np.inner(step_tar_sag, step_cur_sag) > 0:
step_length_cur[0] = mm.length(step_cur_sag)
else:
step_length_cur[0] = -mm.length(step_cur_sag)
step_axis[0] = directionAxis
# rd_vec1[0] = step_tar_sag
# rd_vecori1[0] = motion_seg[curInterval[1]].getJointPositionGlobal(stanceFoots[0])
# rd_vec2[0] = step_cur_sag
# rd_vecori2[0] = controlModel.getJointPositionGlobal(stanceFoots[0])
seg_index[0] += 1
curSeg = segments[seg_index[0]]
stl_y_limit_num[0] = 0
stl_xz_limit_num[0] = 0
del motion_seg_orig[frame+1:]
motion_seg_orig.extend(ymb.getAttachedNextMotion(curSeg, motion_seg_orig[-1], False, False))
del motion_seg[frame+1:]
del motion_stitch[frame+1:]
transitionLength = len(curSeg)-1
# motion_seg.extend(ymb.getAttachedNextMotion(curSeg, motion_seg[-1], False, False))
# motion_stitch.extend(ymb.getStitchedNextMotion(curSeg, motion_control[-1], transitionLength, stitch_func, True, False))
d = motion_seg[-1] - curSeg[0]
d.rootPos[1] = 0.
motion_seg.extend(ymb.getAttachedNextMotion(curSeg, d, True, False))
d = motion_control[-1] - curSeg[0]
d.rootPos[1] = 0.
motion_stitch.extend(ymb.getStitchedNextMotion(curSeg, d, transitionLength, stitch_func, True, False))
# motion_seg.extend(ymb.getAttachedNextMotion(curSeg, motion_seg[-1], False, True))
# motion_stitch.extend(ymb.getStitchedNextMotion(curSeg, motion_control[-1], transitionLength, stitch_func, True, True))
else:
motion_seg_orig.append(motion_seg_orig[-1])
motion_seg.append(motion_seg[-1])
motion_stitch.append(motion_control[-1])
# rendering
motionModel.update(motion_ori[frame])
# motionModel.update(motion_seg[frame])
rd_CP[0] = CP
rd_CMP[0] = (CMreal[0] - (F[0]/F[1])*CMreal[1], 0, CMreal[2] - (F[2]/F[1])*CMreal[1])
if plot!=None:
plot.addDataPoint('zero', frame, 0)
plot.updatePoints()
viewer.setSimulateCallback(simulateCallback)
if MULTI_VIEWER:
viewer.startTimer(frameTime / 1.4)
else:
viewer.startTimer(frameTime * .1)
viewer.show()
Fl.run()
def test_getStitchedNextMotion2():
bvhFilePath = '../samples/walk_left_90degree.bvh'
motion = yf.readBvhFile(bvhFilePath)
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1; vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
steps = yba.getWalkingSteps(lc, rc, True)
stepMotions = yma.splitMotionIntoSegments(motion, steps)
print steps
earlyCycle = 3
howEarly = 10
transitionFunc = lambda x:1.-yfg.hermite2nd(x)
print 'steps[%d] :'%earlyCycle
print 'motion[%d]~motion[%d] => '%(steps[earlyCycle][0], steps[earlyCycle][1]),
print 'motion_stitched_trans_rot[%d]~motion_stitched_trans_rot[%d]'%(steps[earlyCycle][0], steps[earlyCycle][1]-howEarly)
motion_stitched_trans = stepMotions[0].copy()
motion_stitched_trans_rot = stepMotions[0].copy()
motion_stitched_d = stepMotions[0].copy()
motion_attached = stepMotions[0].copy()
for i in range(1, len(stepMotions)):
if i==earlyCycle:
stepMotions[i] = stepMotions[i][:-howEarly]
# motion_stitched_trans += getStitchedNextMotion(stepMotions[i], motion_stitched_trans[-1], len(stepMotions[i])-1, transitionFunc, True, False)
motion_stitched_trans_rot += getStitchedNextMotion(stepMotions[i].copy(), motion_stitched_trans_rot[-1], len(stepMotions[i])-1, transitionFunc, True, True)
# d = motion_stitched_d[-1] - stepMotions[i][0]
# motion_stitched_d += getStitchedNextMotion(stepMotions[i], d, len(stepMotions[i])-1, transitionFunc, True, True)
# motion_attached += getStitchedNextMotion(stepMotions[i], motion_attached[-1], len(stepMotions[i])-1, yfg.zero, True, True)
motion_attached += getAttachedNextMotion(stepMotions[i], motion_attached[-1], len(stepMotions[i])-1, yfg.zero, True, True)
frame0 = [mm.I_SE3()]
viewer = ysv.SimpleViewer()
viewer.record(False)
# viewer.doc.addRenderer('motion', yr.JointMotionRenderer(motion, (100,100,255), yr.LINK_LINE))
# viewer.doc.addObject('motion', motion)
# viewer.doc.addRenderer('motion_stitched_trans', yr.JointMotionRenderer(motion_stitched_trans, (255,255,0), yr.LINK_LINE))
# viewer.doc.addObject('motion_stitched_trans', motion_stitched_trans)
viewer.doc.addRenderer('motion_stitched_trans_rot', yr.JointMotionRenderer(motion_stitched_trans_rot, (0,255,0), yr.LINK_LINE))
viewer.doc.addObject('motion_stitched_trans_rot', motion_stitched_trans_rot)
viewer.doc.addRenderer('motion_attached', yr.JointMotionRenderer(motion_attached, (255,255,255), yr.LINK_LINE))
viewer.doc.addObject('motion_attached', motion_attached)
viewer.doc.addRenderer('frame0', yr.FramesRenderer(frame0, (255,255,0)))
def simulateCallback(frame):
frame0[0] = motion_stitched_trans_rot[frame].getJointFrame(0)
# frame0[0] = motion_attached[frame].getJointFrame(0)
viewer.setSimulateCallback(simulateCallback)
viewer.startTimer((1/30.)/1.4)
viewer.show()
Fl.run()
def test_getStitchedNextMotion2():
bvhFilePath = '../samples/walk_left_90degree.bvh'
motion = yf.readBvhFile(bvhFilePath)
lFoot = motion[0].skeleton.getElementIndex('LeftFoot')
rFoot = motion[0].skeleton.getElementIndex('RightFoot')
hRef = .1
vRef = .3
lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
steps = yba.getWalkingSteps(lc, rc, True)
stepMotions = yma.splitMotionIntoSegments(motion, steps)
print(steps)
earlyCycle = 3
howEarly = 10
transitionFunc = lambda x: 1. - yfg.hermite2nd(x)
print('steps[%d] :' % earlyCycle)
print('ys_motion[%d]~ys_motion[%d] => ' %
(steps[earlyCycle][0], steps[earlyCycle][1]),
end=' ')
print('motion_stitched_trans_rot[%d]~motion_stitched_trans_rot[%d]' %
(steps[earlyCycle][0], steps[earlyCycle][1] - howEarly))
motion_stitched_trans = stepMotions[0].copy()
motion_stitched_trans_rot = stepMotions[0].copy()
motion_stitched_d = stepMotions[0].copy()
motion_attached = stepMotions[0].copy()
for i in range(1, len(stepMotions)):
if i == earlyCycle:
stepMotions[i] = stepMotions[i][:-howEarly]
# motion_stitched_trans += getStitchedNextMotion(stepMotions[i], motion_stitched_trans[-1], len(stepMotions[i])-1, transitionFunc, True, False)
motion_stitched_trans_rot += getStitchedNextMotion(
stepMotions[i].copy(), motion_stitched_trans_rot[-1],
len(stepMotions[i]) - 1, transitionFunc, True, True)
# d = motion_stitched_d[-1] - stepMotions[i][0]
# motion_stitched_d += getStitchedNextMotion(stepMotions[i], d, len(stepMotions[i])-1, transitionFunc, True, True)
# motion_attached += getStitchedNextMotion(stepMotions[i], motion_attached[-1], len(stepMotions[i])-1, yfg.zero, True, True)
motion_attached += getAttachedNextMotion(stepMotions[i],
motion_attached[-1],
len(stepMotions[i]) - 1,
yfg.zero, True, True)
frame0 = [mm.i_se3()]
viewer = ysv.SimpleViewer()
viewer.record(False)
# viewer.doc.addRenderer('ys_motion', yr.JointMotionRenderer(ys_motion, (100,100,255), yr.LINK_LINE))
# viewer.doc.addObject('ys_motion', ys_motion)
# viewer.doc.addRenderer('motion_stitched_trans', yr.JointMotionRenderer(motion_stitched_trans, (255,255,0), yr.LINK_LINE))
# viewer.doc.addObject('motion_stitched_trans', motion_stitched_trans)
viewer.doc.addRenderer(
'motion_stitched_trans_rot',
yr.JointMotionRenderer(motion_stitched_trans_rot, (0, 255, 0),
yr.LINK_LINE))
viewer.doc.addObject('motion_stitched_trans_rot',
motion_stitched_trans_rot)
viewer.doc.addRenderer(
'motion_attached',
yr.JointMotionRenderer(motion_attached, (255, 255, 255),
yr.LINK_LINE))
viewer.doc.addObject('motion_attached', motion_attached)
viewer.doc.addRenderer('frame0',
yr.FramesRenderer(frame0, (255, 255, 0)))
def simulateCallback(frame):
frame0[0] = motion_stitched_trans_rot[frame].getJointFrame(0)
# frame0[0] = motion_attached[frame].getJointFrame(0)
viewer.setSimulateCallback(simulateCallback)
viewer.startTimer((1 / 30.) / 1.4)
viewer.show()
Fl.run()
def segmentMotion(motion,
hRef=0.1,
vRef=0.4,
partsNames=[
"LeftFoot", "RightFoot", "LeftLeg", "RightLeg",
"LeftUpLeg", "RightUpLeg"
],
jumpThreshold=15,
jumpBias=1.0,
stopThreshold=15,
stopBias=0.0):
skeleton = motion[0].skeleton
lFoot = skeleton.getJointIndex(partsNames[0])
rFoot = skeleton.getJointIndex(partsNames[1])
lKnee = skeleton.getJointIndex(partsNames[2])
rKnee = skeleton.getJointIndex(partsNames[3])
lHip = skeleton.getJointIndex(partsNames[4])
rHip = skeleton.getJointIndex(partsNames[5])
#lc = yma.getElementContactStates(motion, lFoot, hRef, vRef)
#rc = yma.getElementContactStates(motion, rFoot, hRef, vRef)
lc = yma.getElementContactStates(motion, "LeftFoot", hRef, vRef)
rc = yma.getElementContactStates(motion, "RightFoot", hRef, vRef)
intervals, states = yba.getBipedGaitIntervals2(lc, rc, jumpThreshold,
jumpBias, stopThreshold,
stopBias)
motions = yma.splitMotionIntoSegments(motion.copy(), intervals)
seginfos = [{} for i in range(len(intervals))]
for i in range(len(intervals)):
start = intervals[i][0]
end = intervals[i][1]
seginfos[i]['interval'] = intervals[i]
seginfos[i]['state'] = states[i]
stanceHips = []
swingHips = []
stanceFoots = []
swingFoots = []
swingKnees = []
if states[i] == yba.GaitState.LSWING:
stanceHips = [rHip]
stanceFoots = [rFoot]
swingHips = [lHip]
swingFoots = [lFoot]
swingKnees = [lKnee]
elif states[i] == yba.GaitState.RSWING:
stanceHips = [lHip]
stanceFoots = [lFoot]
swingHips = [rHip]
swingFoots = [rFoot]
swingKnees = [rKnee]
elif states[i] == yba.GaitState.STOP:
stanceHips = [rHip, lHip]
stanceFoots = [rFoot, lFoot]
elif states[i] == yba.GaitState.JUMP:
swingHips = [rHip, lHip]
swingFoots = [rFoot, lFoot]
seginfos[i]['stanceHips'] = stanceHips
seginfos[i]['swingHips'] = swingHips
seginfos[i]['stanceFoots'] = stanceFoots
seginfos[i]['swingFoots'] = swingFoots
seginfos[i]['swingKnees'] = swingKnees
if start < end:
seginfos[i]['ground_height'] = min([
posture_seg.getJointPositionGlobal(foot)[1]
for foot in [lFoot, rFoot] for posture_seg in motion[start:end]
])
return motions, seginfos
