conddb.addFolderSplitOnline('MUONALIGN','/MUONALIGN/Onl/TGC/SIDEC','/MUONALIGN/TGC/SIDEC')
from MuonCondTool.MuonCondToolConf import MuonAlignmentDbTool
MuonAlignmentDbTool = MuonAlignmentDbTool("MGM_AlignmentDbTool")
MuonAlignmentDbTool.ParlineFolders = ["/MUONALIGN/MDT/BARREL",
"/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC",
"/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"]
ToolSvc += MuonAlignmentDbTool
MGM_AlignmentDbTool = ToolSvc.MGM_AlignmentDbTool
MGM_AlignmentDbTool.OutputLevel = DEBUG
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.StationSelection = 0
MuonDetectorTool.SelectedStations = [ "EIL", "B" ]
MuonDetectorTool.ControlAlines = GeneralControlAlines
MuonDetectorTool.ForceSwitchOnOff_BUILDINERTMATERIALS = 1000; # avoid building the dead matter
MuonDetectorTool.ForceSwitchOnOff_MINIMALGEO = 1001; # IMPORTANT: do not account for cutouts (Amdc does not)
if useAlign:
MuonDetectorTool.UseConditionDb = 1; #default is 1
else:
MuonDetectorTool.UseConditionDb = 0; # override default
MuonDetectorTool.UseAsciiConditionData = 0; #default is 0
MuonDetectorTool.OutputLevel = DEBUG
print MuonDetectorTool
MessageSvc.setDebug+=["MGM::MuonDetectorManager::updateAlignment"]
from AthenaCommon.AlgSequence import AthSequencer
condSequence = AthSequencer("AthCondSeq")
from MuonCondAlg.MuonCondAlgConf import MuonAlignmentCondAlg
condSequence += MuonAlignmentCondAlg('MuonAlignmentCondAlg')
MuonAlignmentCondAlg.ParlineFolders = [
"/MUONALIGN/MDT/BARREL", "/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC", "/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"
]
MuonAlignmentCondAlg.DumpALines = True
MuonAlignmentCondAlg.OutputLevel = DEBUG
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.StationSelection = 0
MuonDetectorTool.SelectedStations = ["EIL", "B"]
MuonDetectorTool.ControlAlines = GeneralControlAlines
MuonDetectorTool.ForceSwitchOnOff_BUILDINERTMATERIALS = 1000
# avoid building the dead matter
MuonDetectorTool.ForceSwitchOnOff_MINIMALGEO = 1001
# IMPORTANT: do not account for cutouts (Amdc does not)
if useAlign:
MuonDetectorTool.UseConditionDb = 1
#default is 1
else:
MuonDetectorTool.UseConditionDb = 0
# override default
MuonDetectorTool.UseAsciiConditionData = 0
#default is 0
#***************************************************** HERE override MuonSpectrometer tag
from AtlasGeoModel import SetGeometryVersion
from GeoModelSvc.GeoModelSvcConf import GeoModelSvc
GeoModelSvc = GeoModelSvc()
if DetDescrVersion=="ATLAS-GEOTEST" or DetDescrVersion=="ATLAS-GEO-21-00-01":
# do nothing
print 'NSWGeoSetup: no need to override tag on the MuonSpectrometer Node with ATLAS tag ', DetDescrVersion
print 'Be aware that the job is running with NSW TDR setup!'
else:
GeoModelSvc.MuonVersionOverride="MuonSpectrometer-R.07.00-NSW"
print GeoModelSvc
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.StationSelection = 2
MuonDetectorTool.SelectedStations = [ "EIL1" ]
MuonDetectorTool.SelectedStations += [ "EIL2" ]
MuonDetectorTool.SelectedStations += [ "EIS*" ]
MuonDetectorTool.SelectedStations += [ "EIL10" ]
MuonDetectorTool.SelectedStations += [ "EIL11" ]
MuonDetectorTool.SelectedStations += [ "CSS*" ]
MuonDetectorTool.SelectedStations += [ "CSL*" ]
MuonDetectorTool.SelectedStations += [ "T4E*" ]
MuonDetectorTool.SelectedStations += [ "T4F*" ]
from AGDD2GeoSvc.AGDD2GeoSvcConf import AGDDtoGeoSvc
Agdd2GeoSvc = AGDDtoGeoSvc()
if not "NSWAGDDTool/NewSmallWheel" in Agdd2GeoSvc.Builders:
from AthenaCommon.AlgSequence import AthSequencer
condSequence = AthSequencer("AthCondSeq")
from MuonCondAlg.MuonCondAlgConf import MuonAlignmentCondAlg
condSequence += MuonAlignmentCondAlg('MuonAlignmentCondAlg')
MuonAlignmentCondAlg.ParlineFolders = [
"/MUONALIGN/MDT/BARREL", "/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC", "/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"
]
MuonAlignmentCondAlg.DumpALines = False
MuonAlignmentCondAlg.OutputLevel = DEBUG
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.StationSelection = 0
MuonDetectorTool.SelectedStations = ["EIL", "B"]
MuonDetectorTool.ControlAlines = GeneralControlAlines
MuonDetectorTool.ForceSwitchOnOff_BUILDINERTMATERIALS = 1000
# avoid building the dead matter
MuonDetectorTool.MinimalGeoFlag = 1 # IMPORTANT: do not account for cutouts in tube position and length (Amdc does not)
if sect5:
MuonDetectorTool.StationSelection = 1 # default is 0
MuonDetectorTool.SelectedStations = [
"BOL", "EML"
] # irrelevant if stationselection is 0
#MuonDetectorTool.SelectedStations = [ "BOL" ] # irrelevant if stationselection is 0
#MuonDetectorTool.SelectedStations = [ "EML" ] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStJzz = [1, -1] ######2, 3, 4, 5, 6, 7, 8]
MuonDetectorTool.SelectedStJff = [3]
# Copyright (C) 2002-2017 CERN for the benefit of the ATLAS collaboration
from AthenaCommon.JobProperties import jobproperties
from AthenaCommon.DetFlags import DetFlags
if (jobproperties.Global.DetGeo() == "ctbh8"
or jobproperties.Global.DetGeo() == "ctbh6"):
print " CTB layout for Muon Spectrometer is not supported anymore"
elif (DetFlags.detdescr.Muon_on()):
from GeoModelSvc.GeoModelSvcConf import GeoModelSvc
GeoModelSvc = GeoModelSvc()
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
GeoModelSvc.DetectorTools += [MuonDetectorTool()]
GeoModelSvc.DetectorTools["MuonDetectorTool"].BuildFromNova = 0
if (not DetFlags.simulate.any_on() or DetFlags.overlay.any_on()):
GeoModelSvc.DetectorTools[
"MuonDetectorTool"].TheMuonAlignmentTool = "MuonAlignmentDbTool/MGM_AlignmentDbTool"
else:
GeoModelSvc.DetectorTools["MuonDetectorTool"].TheMuonAlignmentTool = ""
GeoModelSvc.DetectorTools["MuonDetectorTool"].UseConditionDb = 0
GeoModelSvc.DetectorTools["MuonDetectorTool"].UseAsciiConditionData = 0
include("AmdcAth/AmdcAth_jobOptions.py")
###################### try here the DB stuff
from IOVDbSvc.CondDB import conddb
conddb.addFolder("MUONALIGN",
"/MUONALIGN/MDT/BARREL <tag>HEAD</tag>",
className='CondAttrListCollection')
from AthenaCommon.AlgSequence import AthSequencer
condSequence = AthSequencer("AthCondSeq")
from MuonCondAlg.MuonCondAlgConf import MuonAlignmentCondAlg
condSequence += MuonAlignmentCondAlg('MuonAlignmentCondAlg')
MuonAlignmentCondAlg.ParlineFolders = ["/MUONALIGN/MDT/BARREL"]
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.UseConditionDb = 1
MuonDetectorTool.OutputLevel = VERBOSE
#MuonDetectorTool.CachingFlag = 1 # default is 1
MuonDetectorTool.FillCacheInitTime = 1 # default is 0
#MuonDetectorTool.StationSelection = 0 # default is 0
#MuonDetectorTool.SelectedStations = [ "EIL", "T", "CSS", "BMS" ] # irrelevant if stationselection is 0
#MuonDetectorTool.ControlAlines = GeneralControlAlines # default is 111111
###############################################################################################
###################################################################
from MuonGeoModelTest.MuonGeoModelTestConf import MuonGMTestOnPrd
MuonGMTestOnPrd = MuonGMTestOnPrd()
MuonGMTestOnPrd.OutputLevel = DEBUG
###################################################################
def _do_external(self):
"""Place to handle the external services: GeoModel, IOVDb,
frozen showers, etc
"""
AtlasG4Eng.G4Eng.log.verbose(
'AtlasSimSkeleton._do_external :: starting')
from AthenaCommon.AppMgr import ToolSvc, ServiceMgr
from Geo2G4.Geo2G4Conf import Geo2G4Svc
geo2G4Svc = Geo2G4Svc()
theApp.CreateSvc += ["Geo2G4Svc"]
ServiceMgr += geo2G4Svc
## Enable top transforms for the ATLAS geometry
geo2G4Svc.GetTopTransform = True
## Configure access to the BeamCondSvc if necessary. Assuming
## it should be on always as BeamEffectTransformation is
## currently always switched on, else something like this will
## be required here.
from G4AtlasApps.SimFlags import simFlags
include("InDetBeamSpotService/BeamCondSvc.py")
## GeoModel stuff
## TODO: Tidy imports etc.
from GeoModelSvc.GeoModelSvcConf import GeoModelSvc
from AthenaCommon.GlobalFlags import jobproperties
from AtlasGeoModel import SetGeometryVersion
## Forward Region Twiss files - needed before geometry setup!
if simFlags.ForwardDetectors.statusOn:
if DetFlags.geometry.FwdRegion_on():
from AthenaCommon.CfgGetter import getPublicTool
from AthenaCommon.AppMgr import ToolSvc
ToolSvc += getPublicTool("ForwardRegionProperties")
from AtlasGeoModel import GeoModelInit
from AtlasGeoModel import SimEnvelopes
from GeoModelSvc.GeoModelSvcConf import GeoModelSvc
gms = GeoModelSvc()
## Cosmics GeoModel tweaks
if jobproperties.Beam.beamType() == 'cosmics' or \
(simFlags.CavernBG.statusOn and not 'Signal' in simFlags.CavernBG.get_Value() ):
from CavernInfraGeoModel.CavernInfraGeoModelConf import CavernInfraDetectorTool
gms.DetectorTools += [CavernInfraDetectorTool()]
## Protects GeoModelSvc in the simulation from the AlignCallbacks
gms.AlignCallbacks = False
## Muon GeoModel tweaks
if DetFlags.Muon_on():
## Turn off caching in the muon system
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.FillCacheInitTime = 0 # default is 1
## Additional material in the muon system
from AGDD2GeoSvc.AGDD2GeoSvcConf import AGDDtoGeoSvc
AGDD2Geo = AGDDtoGeoSvc()
from AthenaCommon import CfgGetter
if not "MuonAGDDTool/MuonSpectrometer" in AGDD2Geo.Builders:
ToolSvc += CfgGetter.getPublicTool("MuonSpectrometer",
checkType=True)
AGDD2Geo.Builders += ["MuonAGDDTool/MuonSpectrometer"]
from AtlasGeoModel.MuonGMJobProperties import MuonGeometryFlags
if (MuonGeometryFlags.hasSTGC() and MuonGeometryFlags.hasMM()):
if not "NSWAGDDTool/NewSmallWheel" in AGDD2Geo.Builders:
ToolSvc += CfgGetter.getPublicTool("NewSmallWheel",
checkType=True)
AGDD2Geo.Builders += ["NSWAGDDTool/NewSmallWheel"]
theApp.CreateSvc += ["AGDDtoGeoSvc"]
ServiceMgr += AGDD2Geo
## Add configured GeoModelSvc to service manager
ServiceMgr += gms
## Run the geometry envelope setup earlier than GeoSD
self._do_GeoEnv() #TODO remove
AtlasG4Eng.G4Eng.log.verbose('AtlasSimSkeleton._do_external :: done')
conddb.addFolderSplitOnline('MUONALIGN', '/MUONALIGN/Onl/TGC/SIDEC',
'/MUONALIGN/TGC/SIDEC')
from MuonCondTool.MuonCondToolConf import MuonAlignmentDbTool
MuonAlignmentDbTool = MuonAlignmentDbTool("MGM_AlignmentDbTool")
MuonAlignmentDbTool.ParlineFolders = [
"/MUONALIGN/MDT/BARREL", "/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC", "/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"
]
ToolSvc += MuonAlignmentDbTool
MGM_AlignmentDbTool = ToolSvc.MGM_AlignmentDbTool
MGM_AlignmentDbTool.OutputLevel = DEBUG
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
# memory management
MuonDetectorTool.FillCacheInitTime = 0 # default is 0
#MuonDetectorTool.DumpMemoryBreakDown = True # default is false
# selection of active stations
MuonDetectorTool.StationSelection = 0 # default is 0
#MuonDetectorTool.SelectedStations = [ "X" ] # irrelevant if stationselection is 0 - this will switch off all stations
MuonDetectorTool.SelectedStations = ["EIL", "T", "CSS", "BMS"
] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStations = ["BOL"
] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStJzz = [1, -1]
MuonDetectorTool.SelectedStJff = [3]
# alignment control
MuonDetectorTool.ControlAlines = GeneralControlAlines # default is 111111
MuonDetectorTool.DumpAlines = False
# Copyright (C) 2002-2020 CERN for the benefit of the ATLAS collaboration
from AtlasGeoModel import GeoModelInit
from GeoModelSvc.GeoModelSvcConf import GeoModelSvc
GeoModelSvc = GeoModelSvc()
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
GeoModelSvc.DetectorTools += [ MuonDetectorTool(HasSTgc=False, HasMM=False) ]
GeoModelSvc.SupportedGeometry=21
GeoModelSvc.AtlasVersion='ATLAS-R2-2016-01-00-01'
try:
if database_layout: GeoModelSvc.MuonVersionOverride=database_layout
except NameError:
pass
theApp.CreateSvc += ["GeoModelSvc"]
ServiceMgr += GeoModelSvc
conddb.addFolderSplitOnline('MUONALIGN', '/MUONALIGN/Onl/TGC/SIDEC',
'/MUONALIGN/TGC/SIDEC')
from MuonCondTool.MuonCondToolConf import MuonAlignmentDbTool
MuonAlignmentDbTool = MuonAlignmentDbTool("MGM_AlignmentDbTool")
MuonAlignmentDbTool.ParlineFolders = [
"/MUONALIGN/MDT/BARREL", "/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC", "/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"
]
ToolSvc += MuonAlignmentDbTool
MGM_AlignmentDbTool = ToolSvc.MGM_AlignmentDbTool
MGM_AlignmentDbTool.OutputLevel = DEBUG
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
# memory management
MuonDetectorTool.FillCacheInitTime = 0 # default is 0
#MuonDetectorTool.DumpMemoryBreakDown = True # default is false
# selection of active stations
MuonDetectorTool.StationSelection = 1 # default is 0
#MuonDetectorTool.SelectedStations = [ "X" ] # irrelevant if stationselection is 0 - this will switch off all stations
#MuonDetectorTool.SelectedStations = [ "EIL", "T", "CSS", "BMS" ] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStations = ["CSL"
] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStJzz = [-1, 1]
MuonDetectorTool.SelectedStJff = [3]
# alignment control
MuonDetectorTool.ControlAlines = GeneralControlAlines # default is 111111
MuonDetectorTool.DumpAlines = True
if useAlign:
# Set output level threshold #(0=NIL 1=VERBOSE, 2=DEBUG, 3=INFO, 4=WARNING, 5=ERROR, 6=FATAL ) MessageSvc.OutputLevel = INFO #***************************************************** HERE override MuonSpectrometer tag from AtlasGeoModel import SetGeometryVersion from GeoModelSvc.GeoModelSvcConf import GeoModelSvc GeoModelSvc = GeoModelSvc() #GeoModelSvc.MuonVersionOverride = "MuonSpectrometer-R.01.01.Initial.Light" printfunc(GeoModelSvc) #***************************************************** HERE setup MuonDetectorManager from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool MuonDetectorTool = MuonDetectorTool() MuonDetectorTool.StationSelection = 0 MuonDetectorTool.SelectedStations = ["BOG"] MuonDetectorTool.SelectedStJzz = [3] MuonDetectorTool.SelectedStJff = [6] MuonDetectorTool.ControlAlines = GeneralControlAlines MuonDetectorTool.ForceSwitchOnOff_BUILDINERTMATERIALS = 1000 # avoid building the dead matter MuonDetectorTool.FillCacheInitTime = 1 MuonDetectorTool.DumpMemoryBreakDown = True printfunc(MuonDetectorTool) #***************************************************** HERE setup MuonGMCheck from MuonGeoModelTest.MuonGeoModelTestConf import MuonGMCheck MuonGMCheck = MuonGMCheck()
# Turn off all detector systems except the Muon Spectrometer
from AthenaCommon.DetFlags import DetFlags
DetFlags.detdescr.all_setOff()
DetFlags.detdescr.Muon_setOn()
# Select geometry version
from AthenaCommon.JobProperties import jobproperties
jobproperties.Global.DetDescrVersion = "ATLAS-GEO-08-00-00"
# AtlasGeoModel
from AtlasGeoModel import SetGeometryVersion
from AtlasGeoModel import GeoModelInit
# MuonGeoModel
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.UseConditionDb = 0
MuonDetectorTool.OutputLevel = INFO
# Setup cabling svc
import MuonCnvExample.MuonCablingConfig
# Input data set
import AthenaPoolCnvSvc.ReadAthenaPool
ServiceMgr.EventSelector.InputCollections = [
'rfio:/castor/cern.ch/grid/atlas/atlasgroupdisk/proj-sit/willocq/1510/digi/MC8.107233.singlepart_mu100.digi.pool.1.root'
]
# The number of events to be processed
theApp.EvtMax = 100
GeoModelSvc = GeoModelSvc()
from AtlasGeoModel.MuonGMJobProperties import MuonGeometryFlags
# initialize the MuonIdHelperService
from MuonIdHelpers.MuonIdHelpersConf import Muon__MuonIdHelperSvc
svcMgr += Muon__MuonIdHelperSvc("MuonIdHelperSvc",
HasCSC=MuonGeometryFlags.hasCSC(),
HasSTgc=MuonGeometryFlags.hasSTGC(),
HasMM=MuonGeometryFlags.hasMM())
# create the MuonDetectorTool (which creates the MuonDetectorManager needed by PadTdsOfflineTool)
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
GeoModelSvc.DetectorTools += [
MuonDetectorTool(HasCSC=MuonGeometryFlags.hasCSC(),
HasSTgc=MuonGeometryFlags.hasSTGC(),
HasMM=MuonGeometryFlags.hasMM())
]
#######################################
#######################################
# now the trigger related things
#######################################
from RegionSelector.RegSelSvcDefault import RegSelSvcDefault
svcMgr += RegSelSvcDefault()
include('TrigT1NSW/TrigT1NSW_jobOptions.py')
#Switch on and off trigger simulaton components sTGC / MicroMegas
#October 2019 : MM not working so keep it False until fixed
from AtlasGeoModel import SimEnvelopes
from GeoModelSvc.GeoModelSvcConf import GeoModelSvc
gms = GeoModelSvc()
## Cosmics GeoModel tweaks
if jobproperties.Beam.beamType() == 'cosmics' or \
(simFlags.CavernBG.statusOn and not 'Signal' in simFlags.CavernBG.get_Value() ):
from CavernInfraGeoModel.CavernInfraGeoModelConf import CavernInfraDetectorTool
gms.DetectorTools += [CavernInfraDetectorTool()]
## Protects GeoModelSvc in the simulation from the AlignCallbacks
gms.AlignCallbacks = False
## Muon GeoModel tweaks
if DetFlags.Muon_on():
## Turn off caching in the muon system
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.FillCacheInitTime = 0 # default is 1
if hasattr(simFlags, 'SimulateNewSmallWheel'):
if simFlags.SimulateNewSmallWheel():
MuonDetectorTool.StationSelection = 2
MuonDetectorTool.SelectedStations = ["EIL1"]
MuonDetectorTool.SelectedStations += ["EIL2"]
MuonDetectorTool.SelectedStations += ["EIL6"]
MuonDetectorTool.SelectedStations += ["EIL7"]
MuonDetectorTool.SelectedStations += ["EIS*"]
MuonDetectorTool.SelectedStations += ["EIL10"]
MuonDetectorTool.SelectedStations += ["EIL11"]
MuonDetectorTool.SelectedStations += ["EIL12"]
MuonDetectorTool.SelectedStations += ["EIL17"]
MuonDetectorTool.SelectedStations += ["CSS*"]
MuonDetectorTool.SelectedStations += ["CSL*"]
conddb.addFolderSplitOnline('MUONALIGN', '/MUONALIGN/Onl/TGC/SIDEC',
'/MUONALIGN/TGC/SIDEC')
from MuonCondTool.MuonCondToolConf import MuonAlignmentDbTool
MuonAlignmentDbTool = MuonAlignmentDbTool("MGM_AlignmentDbTool")
MuonAlignmentDbTool.ParlineFolders = [
"/MUONALIGN/MDT/BARREL", "/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC", "/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"
]
ToolSvc += MuonAlignmentDbTool
MGM_AlignmentDbTool = ToolSvc.MGM_AlignmentDbTool
MGM_AlignmentDbTool.OutputLevel = DEBUG
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
# memory management
MuonDetectorTool.FillCacheInitTime = 0 # default is 0
#MuonDetectorTool.DumpMemoryBreakDown = True # default is false
# selection of active stations
MuonDetectorTool.StationSelection = 1 # default is 0
MuonDetectorTool.SelectedStations = [
"X"
] # irrelevant if stationselection is 0 - this will switch off all stations
#MuonDetectorTool.SelectedStations = [ "EIL", "T", "CSS", "BMS" ] # irrelevant if stationselection is 0
#MuonDetectorTool.SelectedStations = [ "BIS" ] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStations = ["T1E", "T4E"
] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStJzz = [1, 2]
MuonDetectorTool.SelectedStJff = [3]
# alignment control
DetFlags.detdescr.ID_setOff()
DetFlags.detdescr.LAr_setOff()
DetFlags.detdescr.Tile_setOff()
DetFlags.detdescr.Muon_setOn()
# Select geometry version
DetDescrVersion = "ATLAS-CSC-01-02-00"
from AthenaCommon.JobProperties import jobproperties
jobproperties.Global.DetDescrVersion = DetDescrVersion
from AtlasGeoModel import SetGeometryVersion
from AtlasGeoModel import GeoModelInit
######################################################################## end setup GeoModel
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
MuonDetectorTool.UseConditionDb = 0
MuonDetectorTool.OutputLevel = INFO
MuonDetectorTool.CachingFlag = 1 # default is 1
MuonDetectorTool.FillCacheInitTime = 1 # default is 0
#MuonDetectorTool.StationSelection = 0 # default is 0
#MuonDetectorTool.SelectedStations = [ "EIL", "T", "CSS", "BMS" ] # irrelevant if stationselection is 0
#MuonDetectorTool.ControlAlines = GeneralControlAlines # default is 111111
###############################################################################################
theApp.EvtMax = 10
import AthenaPoolCnvSvc.ReadAthenaPool
ServiceMgr.EventSelector.InputCollections = [
# '/afs/usatlas.bnl.gov/users/dladams/data/calib0.005145.PythiaZmumu.simul.HITS.v12003101_tid003432._00001.pool.root.1'
'/MUONALIGN/TGC/SIDEC',
className='CondAttrListCollection')
from AthenaCommon.AlgSequence import AthSequencer
condSequence = AthSequencer("AthCondSeq")
from MuonCondAlg.MuonCondAlgConf import MuonAlignmentCondAlg
condSequence += MuonAlignmentCondAlg('MuonAlignmentCondAlg')
MuonAlignmentCondAlg.ParlineFolders = [
"/MUONALIGN/MDT/BARREL", "/MUONALIGN/MDT/ENDCAP/SIDEA",
"/MUONALIGN/MDT/ENDCAP/SIDEC", "/MUONALIGN/TGC/SIDEA",
"/MUONALIGN/TGC/SIDEC"
]
#***************************************************** HERE setup MuonDetectorManager
from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool
MuonDetectorTool = MuonDetectorTool()
# memory management
MuonDetectorTool.FillCacheInitTime = 0 # default is 0
#MuonDetectorTool.DumpMemoryBreakDown = True # default is false
# selection of active stations
MuonDetectorTool.StationSelection = 1 # default is 0
#MuonDetectorTool.SelectedStations = [ "X" ] # irrelevant if stationselection is 0 - this will switch off all stations
#MuonDetectorTool.SelectedStations = [ "EIL", "T", "CSS", "BMS" ] # irrelevant if stationselection is 0
if sect5:
MuonDetectorTool.StationSelection = 1 # default is 0
MuonDetectorTool.SelectedStations = [
"BOL", "EML"
] # irrelevant if stationselection is 0
#MuonDetectorTool.SelectedStations = [ "BOL" ] # irrelevant if stationselection is 0
#MuonDetectorTool.SelectedStations = [ "EML" ] # irrelevant if stationselection is 0
MuonDetectorTool.SelectedStJzz = [-1, 1]
# Set output level threshold #(0=NIL 1=VERBOSE, 2=DEBUG, 3=INFO, 4=WARNING, 5=ERROR, 6=FATAL ) MessageSvc.OutputLevel = INFO #***************************************************** HERE override MuonSpectrometer tag from AtlasGeoModel import SetGeometryVersion from GeoModelSvc.GeoModelSvcConf import GeoModelSvc GeoModelSvc = GeoModelSvc() #GeoModelSvc.MuonVersionOverride = "MuonSpectrometer-R.01.01.Initial.Light" printfunc(GeoModelSvc) #***************************************************** HERE setup MuonDetectorManager from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool MuonDetectorTool = MuonDetectorTool() MuonDetectorTool.StationSelection = 0 MuonDetectorTool.SelectedStations = ["EIL", "B"] MuonDetectorTool.ControlAlines = GeneralControlAlines printfunc(MuonDetectorTool) #***************************************************** HERE setup MuonGMCheck from MuonGeoModelTest.MuonGeoModelTestConf import MuonGMCheck MuonGMCheck = MuonGMCheck() MuonGMCheck.buildMdtRegionSelectorMap = 1 MuonGMCheck.buildRpcRegionSelectorMap = 1 MuonGMCheck.buildTgcRegionSelectorMap = 1 MuonGMCheck.buildCscRegionSelectorMap = 1 printfunc(MuonGMCheck)
MGM_AlignmentDbTool.OutputLevel = DEBUG #***************************************************** HERE override MuonSpectrometer tag from AtlasGeoModel import SetGeometryVersion from GeoModelSvc.GeoModelSvcConf import GeoModelSvc GeoModelSvc = GeoModelSvc() GeoModelSvc.MuonVersionOverride = "MuonSpectrometer-R.07.00" GeoModelSvc.IgnoreTagDifference = True print GeoModelSvc #***************************************************** HERE setup MuonDetectorManager from MuonGeoModel.MuonGeoModelConf import MuonDetectorTool MuonDetectorTool = MuonDetectorTool() MuonDetectorTool.StationSelection = 0 MuonDetectorTool.SelectedStations = ["EIL", "B"] MuonDetectorTool.OutputLevel = VERBOSE MuonDetectorTool.UseConditionDb = 0 print MuonDetectorTool #***************************************************** HERE setup MuonGMCheck from MuonGeoModelTest.MuonGeoModelTestConf import MuonHitRelocation MuonHitRelocation = MuonHitRelocation() MuonHitRelocation.OutputLevel = INFO print MuonHitRelocation