def update_shape(self, change=None):
d = self.declaration
# Get the shape to apply the fillet to
child = self.get_first_child()
# Ignore this operation
if d.disabled:
self.shape = child.shape
return
fillet = BRepFilletAPI_MakeFillet(child.shape)
operations = d.operations if d.operations else child.topology.edges
for item in operations:
if not isinstance(item, (list, tuple)):
fillet.Add(d.radius, item)
continue
# If an array of points is create a changing radius fillet
n = len(item)
if n == 2 and isinstance(item[0], (list, tuple)):
pts, edge = item
array = TColgp_Array1OfPnt2d(1, len(pts))
for i, pt in enumerate(pts):
array.SetValue(i + 1, gp_Pnt2d(*pt))
fillet.Add(array, edge)
continue
if n == 2 and isinstance(item[1], TopoDS_Face):
r, face = item
for edge in Topology(shape=face).edges_from_face(face):
fillet.Add(r, edge)
continue
# custom radius or r1 and r2 radius fillets
fillet.Add(*item)
self.shape = fillet.Shape()
def vertex_fillet(cube_shp, vert):
# apply a fillet on incident edges on a vertex
afillet = BRepFilletAPI_MakeFillet(cube_shp)
cnt = 0
# find edges from vertex
_map = TopTools_IndexedDataMapOfShapeListOfShape()
topexp_MapShapesAndAncestors(cube_shp, TopAbs_VERTEX, TopAbs_EDGE, _map)
results = _map.FindFromKey(vert)
topology_iterator = TopTools_ListIteratorOfListOfShape(results)
while topology_iterator.More():
edge = topods_Edge(topology_iterator.Value())
topology_iterator.Next()
first, last = topexp_FirstVertex(edge), topexp_LastVertex(edge)
vertex, first_vert, last_vert = BRep_Tool().Pnt(vert), BRep_Tool().Pnt(
first), BRep_Tool().Pnt(last)
if edge.Orientation():
if not vertex.IsEqual(first_vert, 0.001):
afillet.Add(0, 20., edge)
else:
afillet.Add(20, 0, edge)
cnt += 1
afillet.Build()
if afillet.IsDone():
return afillet.Shape()
else:
raise AssertionError('you failed on me you fool!')
def variable_filleting(event=None):
display.EraseAll()
# Create Box
Box = BRepPrimAPI_MakeBox(200, 200, 200).Shape()
# Fillet
Rake = BRepFilletAPI_MakeFillet(Box)
ex = TopologyExplorer(Box).edges()
next(ex)
next(ex)
next(ex)
Rake.Add(8, 50, next(ex))
Rake.Build()
if Rake.IsDone():
evolvedBox = Rake.Shape()
display.DisplayShape(evolvedBox)
else:
print("Rake not done.")
# Create Cylinder
Cylinder = BRepPrimAPI_MakeCylinder(
gp_Ax2(gp_Pnt(-300, 0, 0), gp_Dir(0, 0, 1)), 100, 200).Shape()
fillet_ = BRepFilletAPI_MakeFillet(Cylinder)
TabPoint2 = TColgp_Array1OfPnt2d(0, 20)
for i in range(0, 20):
Point2d = gp_Pnt2d(i * 2 * pi / 19,
60 * cos(i * pi / 19 - pi / 2) + 10)
TabPoint2.SetValue(i, Point2d)
exp2 = TopologyExplorer(Cylinder).edges()
fillet_.Add(TabPoint2, next(exp2))
fillet_.Build()
if fillet_.IsDone():
LawEvolvedCylinder = fillet_.Shape()
display.DisplayShape(LawEvolvedCylinder)
else:
print("fillet not done.") ## TODO : fillet not done
P = gp_Pnt(350, 0, 0)
Box2 = BRepPrimAPI_MakeBox(P, 200, 200, 200).Shape()
afillet = BRepFilletAPI_MakeFillet(Box2)
TabPoint = TColgp_Array1OfPnt2d(1, 6)
P1 = gp_Pnt2d(0., 8.)
P2 = gp_Pnt2d(0.2, 16.)
P3 = gp_Pnt2d(0.4, 25.)
P4 = gp_Pnt2d(0.6, 55.)
P5 = gp_Pnt2d(0.8, 28.)
P6 = gp_Pnt2d(1., 20.)
TabPoint.SetValue(1, P1)
TabPoint.SetValue(2, P2)
TabPoint.SetValue(3, P3)
TabPoint.SetValue(4, P4)
TabPoint.SetValue(5, P5)
TabPoint.SetValue(6, P6)
exp = TopologyExplorer(Box2).edges()
next(exp)
next(exp)
next(exp)
afillet.Add(TabPoint, next(exp))
afillet.Build()
if afillet.IsDone():
LawEvolvedBox = afillet.Shape()
display.DisplayShape(LawEvolvedBox)
else:
print("aFillet not done.")
display.FitAll()
def fillet(event=None):
Box = BRepPrimAPI_MakeBox(gp_Pnt(-400, 0, 0), 200, 230, 180).Shape()
fillet_ = BRepFilletAPI_MakeFillet(Box)
# Add fillet on each edge
for e in TopologyExplorer(Box).edges():
fillet_.Add(20, e)
blendedBox = fillet_.Shape()
P1 = gp_Pnt(250, 150, 75)
S1 = BRepPrimAPI_MakeBox(300, 200, 200).Shape()
S2 = BRepPrimAPI_MakeBox(P1, 120, 180, 70).Shape()
Fuse = BRepAlgoAPI_Fuse(S1, S2)
FusedShape = Fuse.Shape()
fill = BRepFilletAPI_MakeFillet(FusedShape)
for e in TopologyExplorer(FusedShape).edges():
fill.Add(e)
for i in range(1, fill.NbContours() + 1):
length = fill.Length(i)
Rad = 0.15 * length
fill.SetRadius(Rad, i, 1)
blendedFusedSolids = fill.Shape()
display.EraseAll()
display.DisplayShape(blendedBox)
display.DisplayShape(blendedFusedSolids)
display.FitAll()
# Combine the two constituent wires
mkWire = BRepBuilderAPI_MakeWire()
mkWire.Add(aWire.Wire())
mkWire.Add(aMirroredWire)
myWireProfile = mkWire.Wire()
# The face that we'll sweep to make the prism
myFaceProfile = BRepBuilderAPI_MakeFace(myWireProfile)
# We want to sweep the face along the Z axis to the height
aPrismVec = gp_Vec(0, 0, height)
myBody = BRepPrimAPI_MakePrism(myFaceProfile.Face(), aPrismVec)
# Add fillets to all edges through the explorer
mkFillet = BRepFilletAPI_MakeFillet(myBody.Shape())
anEdgeExplorer = TopExp_Explorer(myBody.Shape(), TopAbs_EDGE)
while anEdgeExplorer.More():
anEdge = topods.Edge(anEdgeExplorer.Current())
mkFillet.Add(thickness / 12.0, anEdge)
anEdgeExplorer.Next()
myBody = mkFillet
# Create the neck of the bottle
neckLocation = gp_Pnt(0, 0, height)
neckAxis = gp_DZ()
neckAx2 = gp_Ax2(neckLocation, neckAxis)