def process_rotate_extrude(obj):
myrev = doc.addObject("Part::Revolution", "RotateExtrude")
myrev.Source = obj
myrev.Axis = (0.00, 1.00, 0.00)
myrev.Base = (0.00, 0.00, 0.00)
myrev.Angle = 360.00
myrev.Placement = FreeCAD.Placement(FreeCAD.Vector(),
FreeCAD.Rotation(0, 0, 90))
obj.ViewObject.hide()
newobj = doc.addObject("Part::FeaturePython", 'RefineRotateExtrude')
RefineShape(newobj, myrev)
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(newobj.ViewObject)
else:
newobj.ViewObject.Proxy = 0
myrev.ViewObject.hide()
return (newobj)
def process_linear_extrude(obj, h):
mylinear = doc.addObject("Part::Extrusion", "LinearExtrude")
mylinear.Base = obj
mylinear.Dir = (0, 0, h)
mylinear.Placement = FreeCAD.Placement()
try:
mylinear.Solid = True
except:
a = 1 # Any old null statement
obj.ViewObject.hide()
newobj = doc.addObject("Part::FeaturePython", 'RefineLinearExtrude')
RefineShape(newobj, mylinear)
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(newobj.ViewObject)
else:
newobj.ViewObject.Proxy = 0
mylinear.ViewObject.hide()
return (newobj)
def process_linear_extrude(obj, h):
#if gui:
from OpenSCADFeatures import RefineShape
newobj = doc.addObject("Part::FeaturePython", 'RefineLinearExtrude')
RefineShape(newobj, obj) #mylinear)
if gui:
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(newobj.ViewObject)
else:
newobj.ViewObject.Proxy = 0
obj.ViewObject.hide()
#mylinear.ViewObject.hide()
mylinear = doc.addObject("Part::Extrusion", "LinearExtrude")
mylinear.Base = newobj #obj
mylinear.Dir = (0, 0, h)
mylinear.Placement = FreeCAD.Placement()
# V17 change to False mylinear.Solid = True
mylinear.Solid = False
if gui:
newobj.ViewObject.hide()
return (mylinear)
def p_cylinder_action(p):
'cylinder_action : cylinder LPAREN keywordargument_list RPAREN SEMICOL'
print "Cylinder"
tocenter = p[3]['center']
h = float(p[3]['h'])
r1 = float(p[3]['r1'])
r2 = float(p[3]['r2'])
n = int(p[3]['$fn'])
print p[3]
if (r1 == r2):
print "Make Cylinder"
fnmax = FreeCAD.ParamGet(\
"User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetInt('useMaxFN')
if n < 3 or fnmax != 0 and n >= fnmax:
mycyl = doc.addObject("Part::Cylinder", p[1])
mycyl.Height = h
mycyl.Radius = r1
else:
print "Make Prism"
mycyl = doc.addObject("Part::Extrusion", "prism")
mycyl.Dir = (0, 0, h)
try:
import Draft
mycyl.Base = Draft.makePolygon(n, r1)
except:
# If Draft can't import (probably due to lack of Pivy on Mac and
# Linux builds of FreeCAD), this is a fallback.
# or old level of FreeCAD
print "Draft makePolygon Failed, falling back on manual polygon"
mycyl.Base = myPolygon(n, r1)
else:
pass
if gui:
mycyl.Base.ViewObject.hide()
# mycyl.Solid = True
else:
print "Make Cone"
mycyl = doc.addObject("Part::Cone", p[1])
mycyl.Height = h
mycyl.Radius1 = r1
mycyl.Radius2 = r2
print "Center = ", center
if tocenter == 'true':
center(mycyl, 0, 0, h)
if False:
# Does not fix problemfile or beltTighener although later is closer
newobj = doc.addObject("Part::FeaturePython", 'RefineCylinder')
RefineShape(newobj, mycyl)
if gui:
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(newobj.ViewObject)
else:
newobj.ViewObject.Proxy = 0
mycyl.ViewObject.hide()
p[0] = [newobj]
else:
p[0] = [mycyl]
print "End Cylinder"
def p_multmatrix_action(p):
'multmatrix_action : multmatrix LPAREN matrix RPAREN OBRACE block_list EBRACE'
print "MultMatrix"
transform_matrix = FreeCAD.Matrix()
print "Multmatrix"
print p[3]
transform_matrix.A11 = round(float(p[3][0][0]), 12)
transform_matrix.A12 = round(float(p[3][0][1]), 12)
transform_matrix.A13 = round(float(p[3][0][2]), 12)
transform_matrix.A14 = round(float(p[3][0][3]), 12)
transform_matrix.A21 = round(float(p[3][1][0]), 12)
transform_matrix.A22 = round(float(p[3][1][1]), 12)
transform_matrix.A23 = round(float(p[3][1][2]), 12)
transform_matrix.A24 = round(float(p[3][1][3]), 12)
transform_matrix.A31 = round(float(p[3][2][0]), 12)
transform_matrix.A32 = round(float(p[3][2][1]), 12)
transform_matrix.A33 = round(float(p[3][2][2]), 12)
transform_matrix.A34 = round(float(p[3][2][3]), 12)
print transform_matrix
print "Apply Multmatrix"
# If more than one object on the stack for multmatrix fuse first
if (len(p[6]) > 1):
part = fuse(p[6], "Matrix Union")
else:
part = p[6][0]
# part = new_part.transformGeometry(transform_matrix)
# part = new_part.copy()
# part.transformShape(transform_matrix)
if (isspecialorthogonaldeterminant(fcsubmatrix(transform_matrix))):
print "Orthogonal"
part.Placement = FreeCAD.Placement(transform_matrix).multiply(
part.Placement)
new_part = part
elif FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useMultmatrixFeature'):
from OpenSCADFeatures import MatrixTransform
new_part = doc.addObject("Part::FeaturePython", 'Matrix Deformation')
MatrixTransform(new_part, transform_matrix, part)
if gui:
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(new_part.ViewObject)
else:
new_part.ViewObject.Proxy = 0
part.ViewObject.hide()
else:
print "Transform Geometry"
# Need to recompute to stop transformGeometry causing a crash
doc.recompute()
new_part = doc.addObject("Part::Feature", "Matrix Deformation")
# new_part.Shape = part.Base.Shape.transformGeometry(transform_matrix)
new_part.Shape = part.Shape.transformGeometry(transform_matrix)
if gui:
part.ViewObject.hide()
if False:
# Does not fix problemfile or beltTighener although later is closer
newobj = doc.addObject("Part::FeaturePython", 'RefineMultMatrix')
RefineShape(newobj, new_part)
if gui:
newobj.ViewObject.Proxy = 0
new_part.ViewObject.hide()
p[0] = [newobj]
else:
p[0] = [new_part]
print "Multmatrix applied"
def p_cylinder_action(p):
'cylinder_action : cylinder LPAREN keywordargument_list RPAREN SEMICOL'
if printverbose: print("Cylinder")
tocenter = p[3]['center']
h = float(p[3]['h'])
r1 = float(p[3]['r1'])
r2 = float(p[3]['r2'])
#n = int(p[3]['$fn'])
#n = int(round(float(p[3]['$fn'])))
n = num(p[3]['$fn'])
fnmax = FreeCAD.ParamGet(\
"User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetInt('useMaxFN')
if fnmax == 0: fnmax = 16
if printverbose: print(p[3])
if h > 0:
if (r1 == r2 and r1 > 0):
if printverbose: print("Make Cylinder")
if n < 3 or fnmax != 0 and n > fnmax:
mycyl = doc.addObject("Part::Cylinder", p[1])
mycyl.Height = h
mycyl.Radius = r1
else:
if printverbose: print("Make Prism")
if False: #user Draft Polygon
mycyl = doc.addObject("Part::Extrusion", "prism")
mycyl.Dir = (0, 0, h)
try:
import Draft
mycyl.Base = Draft.makePolygon(n, r1, face=True)
except:
# If Draft can't import (probably due to lack of Pivy on Mac and
# Linux builds of FreeCAD), this is a fallback.
# or old level of FreeCAD
if printverbose:
print(
"Draft makePolygon Failed, falling back on manual polygon"
)
mycyl.Base = myPolygon(n, r1)
# mycyl.Solid = True
else:
pass
if gui:
mycyl.Base.ViewObject.hide()
else: #Use Part::Prism primitive
mycyl = doc.addObject("Part::Prism", "prism")
mycyl.Polygon = n
mycyl.Circumradius = r1
mycyl.Height = h
elif (r1 != r2):
if n < 3 or fnmax != 0 and n > fnmax:
if printverbose: print("Make Cone")
mycyl = doc.addObject("Part::Cone", p[1])
mycyl.Height = h
mycyl.Radius1 = r1
mycyl.Radius2 = r2
else:
if printverbose: print("Make Frustum")
mycyl = doc.addObject("Part::FeaturePython", 'frustum')
from OpenSCADFeatures import Frustum
Frustum(mycyl, r1, r2, n, h)
if gui:
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(mycyl.ViewObject)
else:
mycyl.ViewObject.Proxy = 0
else: # r1 == r2 == 0
FreeCAD.Console.PrintWarning('cylinder with radius zero\n')
mycyl = doc.addObject("Part::Feature", "emptycyl")
mycyl.Shape = Part.Compound([])
else: # h == 0
FreeCAD.Console.PrintWarning('cylinder with height <= zero\n')
mycyl = doc.addObject("Part::Feature", "emptycyl")
mycyl.Shape = Part.Compound([])
if printverbose: print("Center = ", tocenter)
if tocenter == 'true':
center(mycyl, 0, 0, h)
if False:
# Does not fix problemfile or beltTighener although later is closer
newobj = doc.addObject("Part::FeaturePython", 'RefineCylinder')
RefineShape(newobj, mycyl)
if gui:
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(newobj.ViewObject)
else:
newobj.ViewObject.Proxy = 0
mycyl.ViewObject.hide()
p[0] = [newobj]
else:
p[0] = [mycyl]
if printverbose: print("End Cylinder")
def p_multmatrix_action(p):
'multmatrix_action : multmatrix LPAREN matrix RPAREN OBRACE block_list EBRACE'
from OpenSCADUtils import isspecialorthogonalpython, \
fcsubmatrix, roundrotation, isrotoinversionpython, \
decomposerotoinversion
from OpenSCADFeatures import RefineShape
if printverbose: print("MultMatrix")
transform_matrix = FreeCAD.Matrix()
if printverbose: print("Multmatrix")
if printverbose: print(p[3])
m1l = sum(p[3], [])
if any('x' in me for me in m1l): #hexfloats
m1l = [float.fromhex(me) for me in m1l]
matrixisrounded = False
elif max((len(me) for me in m1l)) >= 14: #might have double precision
m1l = [float(me) for me in m1l] # assume precise output
m1l = [(0 if (abs(me) < 1e-15) else me) for me in m1l]
matrixisrounded = False
else: #trucanted numbers
m1l = [round(float(me), 12) for me in m1l] #round
matrixisrounded = True
transform_matrix = FreeCAD.Matrix(*tuple(m1l))
if printverbose: print(transform_matrix)
if printverbose: print("Apply Multmatrix")
# If more than one object on the stack for multmatrix fuse first
if p[6] == None:
print(p)
print(dir(p))
if (len(p[6]) == 0):
part = placeholder('group', [], '{}')
elif (len(p[6]) > 1):
part = fuse(p[6], "Matrix Union")
else:
part = p[6][0]
if (isspecialorthogonalpython(fcsubmatrix(transform_matrix))):
if printverbose: print("special orthogonal")
if matrixisrounded:
if printverbose: print("rotation rounded")
plm = FreeCAD.Placement(transform_matrix)
plm = FreeCAD.Placement(plm.Base, roundrotation(plm.Rotation))
part.Placement = plm.multiply(part.Placement)
else:
part.Placement=FreeCAD.Placement(transform_matrix).multiply(\
part.Placement)
new_part = part
elif isrotoinversionpython(fcsubmatrix(transform_matrix)):
if printverbose: print("orthogonal and inversion")
cmat, axisvec = decomposerotoinversion(transform_matrix)
new_part = doc.addObject("Part::Mirroring", 'mirr_%s' % part.Name)
new_part.Source = part
new_part.Normal = axisvec
if matrixisrounded:
if printverbose: print("rotation rounded")
plm = FreeCAD.Placement(cmat)
new_part.Placement = FreeCAD.Placement(plm.Base,
roundrotation(plm.Rotation))
else:
new_part.Placement = FreeCAD.Placement(cmat)
new_part.Label = "mirrored %s" % part.Label
if gui:
part.ViewObject.hide()
elif FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useMultmatrixFeature'):
from OpenSCADFeatures import MatrixTransform
new_part = doc.addObject("Part::FeaturePython", 'Matrix Deformation')
MatrixTransform(new_part, transform_matrix, part)
if gui:
if FreeCAD.ParamGet("User parameter:BaseApp/Preferences/Mod/OpenSCAD").\
GetBool('useViewProviderTree'):
from OpenSCADFeatures import ViewProviderTree
ViewProviderTree(new_part.ViewObject)
else:
new_part.ViewObject.Proxy = 0
part.ViewObject.hide()
else:
if printverbose: print("Transform Geometry")
# Need to recompute to stop transformGeometry causing a crash
doc.recompute()
new_part = doc.addObject("Part::Feature", "Matrix Deformation")
# new_part.Shape = part.Base.Shape.transformGeometry(transform_matrix)
new_part.Shape = part.Shape.transformGeometry(transform_matrix)
if gui:
part.ViewObject.hide()
if False:
# Does not fix problemfile or beltTighener although later is closer
newobj = doc.addObject("Part::FeaturePython", 'RefineMultMatrix')
RefineShape(newobj, new_part)
if gui:
newobj.ViewObject.Proxy = 0
new_part.ViewObject.hide()
p[0] = [newobj]
else:
p[0] = [new_part]
if printverbose: print("Multmatrix applied")