def run(args):
# att = Clifford(-1.7, 1.3, -0.1, -1.21)
# att = DequanLi(40, 1.833, 0.16, 0.65, 55, 20,
# x=0.349,
# y=0.0,
# z=-0.16,
# dt=0.0001)
att = halvorsen(1.4, x=1, y=0, z=0, dt=0.0049)
points = []
burn_in = 1000
[next(att) for _ in range(burn_in)]
points = [next(att) for _ in range(750000)]
points = np.array(points)
# from mpl_toolkits.mplot3d import Axes3D
# ax = plt.axes(projection="3d")
# ax.plot3D(points[:, 0],
# points[:, 1],
# points[:, 2],
# lw=0.01)
# plt.figure()
points = isometric(points.T).T
y_margin_mm = 30
x_margin_mm = 30
H = 210 # A4
W = 297 # A4
points = resize_and_center(points, H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
N_pre_simplification = points.shape[0]
# points = simplify_reumann_witkam(0.07, points)
N_post_simplification = points.shape[0]
print('line simplified from {} to {} points ({}%)'.format(
N_pre_simplification, N_post_simplification,
int(np.round(100 * N_post_simplification / N_pre_simplification))))
plt.plot(points[:, 0], points[:, 1], '-', linewidth=0.02)
plt.plot(points[0:500, 0], points[0:500, 1], 'r-')
plt.plot(points[0, 0], points[0, 1], 'rx')
plt.axis('equal')
plt.show()
with Plotter('/dev/ttyUSB0', 9600) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polyline(points, n_decimal=1)
return 0
def run(args):
particles = circle((0, 0), 1, N=360)
forces = []
x_noise = OpenSimplex(42)
y_noise = OpenSimplex(211)
np.random.seed(64)
dist = lambda x: np.linalg.norm(x)
forces.append(lambda x: 0.6*np.array(
[x_noise.noise2d(x=x[0], y=x[1]),
y_noise.noise2d(x=x[0], y=x[1])]))
forces.append(lambda x: 0.05*gravity(x, np.array((2, 2))))
forces.append(lambda x: 0.05*gravity(x, np.array((1.5, 0))))
forces.append(lambda x: 0.05*gravity(x, np.array((1.5, 1.5))))
forces.append(lambda x: -x if dist(x) > 3 else np.array((0.0, 0.0)))
to_draw = []
for p in tqdm.tqdm(particles):
path = run_particle(p, forces, N_steps=np.random.randint(999, 1000), step_size=1)
to_draw.append(path)
x_margin_mm = 30
y_margin_mm = 30
H = 210 # A4
W = 297 # A4
to_draw = resize_and_center(to_draw, H, W,
x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
simplified = []
for p in to_draw:
simplified.append(simplify_reumann_witkam(0.5, p))
to_draw = optimize(simplified)
vis_drawing(to_draw, 'b-', lw=0.1)
plt.axis('equal')
plt.gca().invert_yaxis()
plt.show()
# return 1
with Plotter('/dev/ttyUSB0', 9600) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0),
(0, H), (W, H))
p.draw_polylines(to_draw)
return 0
def run(args):
x_margin_mm = 20
y_margin_mm = 20
H = 210 # A4
W = 297 # A4
frac = 0.02
subdiv_step = 2.0
min_side = 1.0
triangle = np.array([[0, 0], [20, 0], [10, (np.sqrt(3) / 2) * 20], [0, 0]
]) * 10
triangle = resize_and_center([triangle], H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)[0]
to_draw = [triangle.copy()]
i = 0
while i < 5000:
side_lengths = np.array(triangle_lengths(triangle))
subdiv_frac = subdiv_step / side_lengths
subdiv_frac[:] = frac
if np.isnan(subdiv_frac[0]):
break
subdivision = subdivide_triangle(triangle, subdiv_frac[0],
subdiv_frac[1], subdiv_frac[2])
center_tri = subdivision[3]
triangle = center_tri.copy()
to_draw.append(triangle.copy())
max_len = np.amax(side_lengths)
if max_len < min_side:
break
i += 1
stats = drawing_stats(to_draw)
print('stats: {}'.format(stats))
vis_drawing(to_draw, 'k-', lw=0.5)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.axis('equal')
plt.gca().invert_yaxis()
plt.show()
with Plotter('/dev/ttyUSB0', 9600) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(to_draw)
return 0
def __init__(self, W=2970 // 3, H=2100 // 3):
self.canvas = 255 * np.ones((H, W))
cv2.namedWindow('canvas')
cv2.setMouseCallback('canvas', self.handler)
self.down = False
self.use_servo = True
self.started = True
self.tracking = False
self.last_pos = None
try:
self.plotter = Plotter('/dev/ttyUSB0', 115200)
self.plotter.load_config('config.json')
self.plotter.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
except:
print('no plotter connected')
self.plotter = None
def run(args):
y_margin_mm = 30
x_margin_mm = 30
H = 210 # A4
W = 297 # A4
grid_gap_mm = args.grid_gap_mm
points = grid((x_margin_mm, y_margin_mm),
(W - x_margin_mm, H - y_margin_mm),
(grid_gap_mm, grid_gap_mm))
points = optimize(points)
if args.rot != 0:
points = rotate(points, args.rot)
with Plotter('/dev/ttyUSB0', 115200) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(points)
return 0
def run(args):
svg_path = args.path
parsed_paths, attributes, svg_attributes = svgpt.svg2paths(
svg_path, return_svg_attributes=True)
logger.info('SVG loaded')
paths = []
for path in parsed_paths:
if path.iscontinuous():
paths.append(path)
else:
for p in path.continuous_subpaths():
paths.append(p)
np_paths = []
step = 1
for path_i, path in enumerate(tqdm.tqdm(paths, desc='paths')):
np_path = [cplx_to_xy(path.start)]
for part in path:
if type(part) is svgpt.path.Line:
start = cplx_to_xy(part.start)
end = cplx_to_xy(part.end)
if start != np_path[-1]:
np_path.append(start)
np_path.append(end)
else:
length = part.length()
steps = int(np.round(length / step))
# steps = 20
if steps == 0:
continue
fraction_step = 1 / steps
for i in range(steps + 1):
try:
pt = path.point(fraction_step * i)
pt = cplx_to_xy(pt)
np_path.append(pt)
except Exception:
pass
np_paths.append(np.array(np_path))
logger.info('SVG converted')
to_draw = np_paths
if args.rotate:
to_draw = rotate(to_draw)
page_conf = load_page_conf(args.format)
x_margin_mm = args.margins
y_margin_mm = args.margins
H = page_conf['H'] # 210 # A4
W = page_conf['W'] # 297 # A4
to_draw = resize_and_center(to_draw, H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
orig = copy.deepcopy(to_draw)
if args.border_crop:
border = rounded_rect(drawing_bbox(to_draw), args.border_round)
vis_drawing([border], 'b-', linewidth=0.5)
logger.info("Masking drawing")
to_draw = mask_drawing(to_draw, border)
to_draw = multi_pass(to_draw, args.multipass)
if not args.noopt:
logger.info("Starting optimization")
to_draw = optimize(to_draw,
path_join_threshold=args.join,
line_simplification_threshold=args.simplify,
path_drop_threshold=args.drop)
logger.info('plotting')
vis_drawing(to_draw, 'r-', linewidth=0.5)
vis_drawing(orig, 'k-', linewidth=0.5)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.axis('equal')
# plt.gca().invert_yaxis()
plt.show()
with Plotter('/dev/ttyUSB0', 9600) as p:
p.load_config(args.opconfig)
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.set_speed(289)
p.draw_polylines(to_draw)
return 0
def run(args):
try:
from OtterPlotter import Plotter
except ImportError:
from fake_plotter import FakePlotter as Plotter
import matplotlib.pyplot as plt
# polygon = np.array([[0, 0], [2, 1], [1, 1.5], [0.5, 1], [0, 2], [3, 1], [0, 0]])
# # hatching = polygon_hatch(polygon, 0.04, 45)
# hatching = polygon_crosshatch(polygon, 0.04, 45)
# vis_drawing([polygon] + hatching, 'b-', lw=0.5)
x_margin_mm = 10
y_margin_mm = 10
H = 210 # A4
W = 297 # A4
min_hatch_dist = 0.05
max_hatch_dist = 4
min_subdivision_level = 2
max_subdivision_level = 6
triangle = np.array([[0, 0], [20, 0], [10, (np.sqrt(3) / 2) * 20], [0, 0]
]) * 10
triangle = resize_and_center([triangle], H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)[0]
from collections import deque
from opensimplex import OpenSimplex
subdiv_noise = OpenSimplex()
subdiv_noise_mult = 0.01
hatch_noise = OpenSimplex(42)
hatch_noise_mult = 0.01
hatch_dist_noise = OpenSimplex(1117)
hatch_dist_noise_mult = 0.05
hatch_angle_noise = OpenSimplex(2111)
hatch_angle_noise_mult = 0.01
q = deque()
q.append((triangle, 0))
triangles = []
while len(q) > 0:
tri, level = q.pop()
tri_center = np.mean(tri[:-1, :], axis=0)
rnd = subdiv_noise.noise2d(x=tri_center[0] * subdiv_noise_mult * level,
y=tri_center[1] * subdiv_noise_mult * level)
rnd = remap(rnd, -1, 1, 0, 1)
if not level <= min_subdivision_level \
and (level >= max_subdivision_level or rnd < 0.4):
triangles.append(tri)
else:
rnd = subdiv_noise.noise2d(
x=tri_center[0] * subdiv_noise_mult * level,
y=tri_center[1] * subdiv_noise_mult * level)
rnd = remap(rnd, -1, 1, 0.3, 0.7)
rnd2 = subdiv_noise.noise2d(
x=tri_center[1] * subdiv_noise_mult * level,
y=tri_center[0] * subdiv_noise_mult * level)
rnd2 = remap(rnd2, -1, 1, 0.3, 0.7)
rnd3 = subdiv_noise.noise2d(
x=tri_center[0] * subdiv_noise_mult * level,
y=tri_center[0] * subdiv_noise_mult * level)
rnd3 = remap(rnd3, -1, 1, 0.3, 0.7)
# rnd = 0.5
subdivision = subdivide_triangle(tri, rnd, rnd2, rnd3)
for new_tri in subdivision:
q.append((new_tri, level + 1))
triangles = [inset_triangle(tri, 0.7) for tri in triangles]
hatchings = []
for tri in triangles:
tri_c = np.mean(tri[:-1, :], axis=0)
hatch_dist = remap(
hatch_dist_noise.noise2d(x=tri_c[0] * hatch_dist_noise_mult,
y=tri_c[1] * hatch_dist_noise_mult), -1,
1, min_hatch_dist, max_hatch_dist)
# hatch_dist = min_hatch_dist
hatch_angle = remap(
hatch_angle_noise.noise2d(x=tri_c[0] * hatch_angle_noise_mult,
y=tri_c[1] * hatch_angle_noise_mult), -1,
1, 0, 180)
rnd = remap(
hatch_noise.noise2d(x=tri_c[0] * hatch_noise_mult,
y=tri_c[1] * hatch_noise_mult), -1, 1, 0, 1)
if rnd < 1 / 3:
hatching = polygon_hatch(tri, hatch_dist, hatch_angle)
hatchings += hatching
elif rnd < 2 / 3:
hatching = polygon_crosshatch(tri, hatch_dist, hatch_angle)
hatchings += hatching
# to_draw = []
# backstroke = []
# triangle[:, 1] += 10
# for i in np.linspace(0, 1, 30):
# backstroke.append(triangle[0] + i * (triangle[1] - triangle[0]))
# backstroke = np.array(backstroke)
# to_draw = [triangle[:2], backstroke[::-1]]
to_draw = [triangle] + triangles + hatchings
pre_optim_stats = drawing_stats(to_draw)
print('pre_optim_stats: {}'.format(pre_optim_stats))
vis_drawing(to_draw, 'k-', lw=0.5)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.axis('equal')
plt.gca().invert_yaxis()
plt.show()
to_draw = [] + optimize(triangles, verbose=False) + optimize(hatchings,
verbose=False)
optim_stats = drawing_stats(to_draw)
print('optim_stats: {}'.format(optim_stats))
with Plotter('/dev/ttyUSB0', 9600) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(to_draw)
return 0
def run(args):
saver = ReproSaver()
saver.seed()
if args.img is not None:
drawing_name = os.path.splitext(os.path.basename(args.img))[0]
img = cv2.imread(args.img)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
else:
drawing_name = 'tonal_map'
orig_tonal_map = np.linspace(0, 1, num=256)
gray = np.tile(255 * orig_tonal_map.reshape(1, orig_tonal_map.size),
(40, 1)).astype(np.uint8)
gray = resize_to_max(gray, 4000)
logger.info("drawing_name: {}".format(drawing_name))
edges = cv2.Canny(gray, 60, 80)
edge_distance = distance_transform_edt(255 - edges)
# cv2.imshow("cv: edges", edges)
# cv2.imshow("cv: edge_distance", edge_distance / np.amax(edge_distance))
# while True:
# c = cv2.waitKey(0)
# if c == ord('q'):
# import sys
# sys.exit(1)
density = 1 - (gray.astype(np.float64) / 255)
def stippling_density(density):
return density**3
logger.info("stippling")
with tmp_np_seed(42):
stippling_fn = CachedComputation(
os.path.join("cache", f"curly_tsp_stipple_{drawing_name}.pkl"),
force=args.force)(ascencio2010stippling)
points = stippling_fn(stippling_density(density),
K=200,
min_r=2,
max_r=75)
gui = Drawer(point_r=10)
# gui.add_lines([points.copy()], 'g')
gui.add_points([points.copy()], 'k')
# gui.draw()
logger.info("TSP-ing")
tsp_fn = CachedComputation(os.path.join("cache",
f"curly_tsp_{drawing_name}.pkl"),
force=args.force)(concorde_tsp)
tsp_pts = tsp_fn(points)
if args.straight_test:
logger.debug('Using straight line instead of TSP path')
tsp_pts = np.array([[20, gray.shape[0] / 2],
[gray.shape[1] - 20, gray.shape[0] / 2]])
gui = Drawer()
gui.add_lines([tsp_pts], 'k')
# gui.draw()
logger.info("squiggling")
squiggle_fn = CachedComputation(os.path.join(
"cache", f"curly_tsp_squiggle_{drawing_name}.pkl"),
force=args.force)(chiu2015tone_scribble)
squiggle_fn = chiu2015tone_scribble
if os.path.exists(
'curly_tsp_LUT.npy'
) and not args.tonal_map and not args.straight_test and not args.nolut:
LUT = np.load('curly_tsp_LUT.npy')
logger.info('using tonal mapping LUT')
gray = apply_LUT(gray, LUT)
speed_img = gray
speed_img = speed_img.astype(np.float32) / 255
if args.tonal_map or args.straight_test:
edge_distance = None
to_draw = [
squiggle_fn(tsp_pts,
r=185,
speed_img=speed_img,
edge_dist_img=edge_distance)
]
gui = Drawer(lw=5)
gui.add_lines(to_draw, (0, 0, 0, 1))
gui.draw()
if args.tonal_map:
rendered = render_lines(gray, to_draw[0])
sigma = 19
blurred_rendered = cv2.GaussianBlur(rendered,
ksize=(0, 0),
sigmaX=sigma)
rendered_tonal_map = np.mean(blurred_rendered.astype(np.float32) / 255,
axis=0)
orig_tonal_map = gray[0, :].astype(np.float32) / 255
rendered_tones = np.tile(rendered_tonal_map[np.newaxis, :],
(gray.shape[0], 1))
cv2.imshow("cv: rendered", rendered)
cv2.imshow("cv: blurred rendered", blurred_rendered)
cv2.imshow("cv: rendered_tones", rendered_tones)
cv2.imshow("cv: gray", gray)
while True:
c = cv2.waitKey(0)
if c == ord('q'):
break
cv2.destroyAllWindows()
lut = compute_tonal_mapping(rendered_tonal_map, orig_tonal_map)
np.save('curly_tsp_LUT', lut)
if not args.nosave:
saver.add_svg(to_draw)
x_margin_mm = 5
y_margin_mm = 5
H = 210 # A4
W = 297 # A4
to_draw = rotate(to_draw)
to_draw = resize_and_center(to_draw, H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
border = [np.array([[0, 0], [W, 0], [W, H], [0, H], [0, 0]])]
# gui = Drawer(point_r=2)
# gui.add_lines(to_draw, 'b')
# gui.add_lines(border, 'r')
# gui.add_points(border, 'g')
# gui.draw()
# vis_drawing(to_draw, "r-", linewidth=0.5)
if not args.noopt:
to_draw = optimize(to_draw, line_simplification_threshold=0.1)
vis_drawing(to_draw, "k-", linewidth=0.5)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], "k:")
plt.axis("equal")
plt.gca().invert_yaxis()
plt.show()
with Plotter() as p:
p.load_config("config.json")
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(to_draw)
return 0
def run(args):
drawing = load_drawing(args.path)
x_margin_mm = 10
y_margin_mm = 10
H = 210 # A4
W = 297 # A4
to_draw = resize_and_center(drawing, H, W,
x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
if type(to_draw) is not dict:
# single layer
to_draw = {'single_layer': to_draw}
if not args.no_opt:
to_draw = {layer_name: optimize(layer,
line_simplification_threshold=args.simplify)
for layer_name, layer in to_draw.items()}
if 'black' in to_draw and 'red' in to_draw:
vis_drawing(to_draw['black'], 'k-', lw=0.1)
vis_drawing(to_draw['red'], 'r-', lw=0.3)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.axis('equal')
plt.gca().invert_yaxis()
plt.show()
all_keys = set([str(i) for i in range(10)] + [chr(c) for c in range(97, 123)])
reserved_keys = set(['?', 'q'])
layer_keys = sorted(list(all_keys - reserved_keys))
key_layer_mapping = {layer_keys[i]: layer_name for i, layer_name in enumerate(to_draw.keys())}
def help():
print('? - this help')
print('q - quit')
for k in sorted(key_layer_mapping.keys()):
print('{} - plot "{}" layer'.format(k, key_layer_mapping[k]))
help()
while True:
key = getkey()
print(key)
if key == 'q':
sys.exit(0)
elif key == '?':
help()
elif key in key_layer_mapping:
layer_name = key_layer_mapping[key]
print('printing "{}"'.format(layer_name))
layer = to_draw[layer_name]
with Plotter('/dev/ttyUSB0', 115200) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0),
(0, H), (W, H))
p.draw_polylines(layer)
print('LAYER FINISHED')
help()
return 0
def run(args):
img = cv2.imread(args.img)
img = cv2.resize(img, (800, 600), cv2.INTER_AREA)
## create a flow field
H, W = img.shape[:2]
x_noise = OpenSimplex(240)
y_noise = OpenSimplex(32)
field = np.zeros((H, W, 2))
for y in range(H):
for x in range(W):
mult = 0.0015
x_val = x_noise.noise2d(x=mult * x, y=mult * y)
y_val = y_noise.noise2d(x=mult * x, y=mult * y)
field[y, x, :] = (x_val, y_val)
# draw_field(field, N_particles=2000)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY).astype(np.float64) / 256
sigma = 3
gray = cv2.GaussianBlur(gray, ksize=(0, 0), sigmaX=sigma)
# cv2.imshow("cv: gray", gray)
# c = cv2.waitKey(0)
# if c == ord('q'):
# import sys
# sys.exit(1)
points = draw_field(field, guide=1 - gray, N_particles=10000)
# ## draw the image with the flow field
# cv2.namedWindow('cv: img', cv2.WINDOW_NORMAL)
# cv2.imshow("cv: img", img)
# # cv2.imshow("cv: field", np.linalg.norm(field, axis=2))
# cv2.imshow("cv: field", field[..., 0])
# cv2.resizeWindow('cv: img', 800, 600)
# c = cv2.waitKey(0)
# if c == ord('q'):
# import sys
# sys.exit(1)
x_margin_mm = 10
y_margin_mm = 10
H = 210 # A4
W = 297 # A4
to_draw = resize_and_center(points, H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
vis_drawing(to_draw, 'r-', linewidth=0.5)
to_draw = optimize(to_draw, line_simplification_threshold=0.1)
vis_drawing(to_draw, 'k-', linewidth=0.5)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.axis('equal')
plt.gca().invert_yaxis()
plt.show()
H = 210 # A4
W = 297 # A4
with Plotter('/dev/ttyUSB0', 115200) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(to_draw)
return 0
def run(args):
N_per_layer = 8
N_per_blob = 21
N_layers = 12
r_min_layer = 5.5
r_layer_step = 1.6
N_per_circle = 30
r_circle_min = 0.05
r_circle_max = 1.1
paths = []
for i_layer in range(N_layers):
r_layer = r_min_layer + i_layer * r_layer_step
center_angles = np.linspace(0,
2 * np.pi,
N_per_blob * N_per_layer,
endpoint=False)
# center_angles -= np.exp(remap(i_layer, 0, N_layers-1,
# 0, 0.6))
# center_angles -= np.exp(i_layer*1.618 / N_layers)
center_angles -= remap(i_layer, 0, N_layers - 1, 0, np.radians(120))
# center_angles += 1.618033 * i_layer
for i_blob in range(N_per_layer):
for i_circle in range(N_per_blob):
center_x = r_layer * np.cos(
center_angles[i_blob * N_per_blob + i_circle])
center_y = r_layer * np.sin(
center_angles[i_blob * N_per_blob + i_circle])
# r_circle = remap(abs(i_circle - N_per_blob // 2),
# 0, N_per_blob // 2,
# r_circle_max, r_circle_min)
r_circle = np.sin(remap(i_circle, 0, N_per_blob, 0,
np.pi)) * r_circle_max + r_circle_min
angle_start = np.random.rand() * 2 * np.pi
angle_end = angle_start + 2 * np.pi
angles = np.linspace(angle_start, angle_end, N_per_circle)
sins = np.sin(angles)
cosins = np.cos(angles)
points = np.zeros((N_per_circle, 2))
points[:, 0] = cosins * r_circle + center_x
points[:, 1] = sins * r_circle + center_y
paths.append(points)
# plt.axis('equal')
# vis_drawing(paths, 'k-', linewidth=0.1)
# plt.gca().invert_yaxis()
# plt.show()
x_margin_mm = 10
y_margin_mm = 10
H = 210 # A4
W = 297 # A4
to_draw = resize_and_center(paths, H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
vis_drawing(to_draw, 'r-', linewidth=0.1)
to_draw = optimize(to_draw, line_simplification_threshold=0.1)
vis_drawing(to_draw, 'k-', linewidth=0.1)
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.axis('equal')
plt.gca().invert_yaxis()
plt.show()
H = 210 # A4
W = 297 # A4
# baud = 115200
baud = 9600
with Plotter('/dev/ttyUSB0', baud) as p:
p.load_config('config.json')
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(to_draw)
return 0
def run(args):
img = cv2.imread(args.img)
img = resize_to_px_count(img, 1000**2)
gray = cv2.cvtColor(img, cv2.COLOR_BGR2GRAY)
blur_type = 'bilateral'
# blur_type = 'gauss'
if blur_type == 'gauss':
sigma = 8
if sigma > 0:
gray = cv2.GaussianBlur(gray, ksize=(0, 0), sigmaX=sigma)
elif blur_type == 'bilateral':
sigmaColor = 20
sigmaSpace = 5
blurred = cv2.bilateralFilter(img,
d=-1,
sigmaColor=sigmaColor,
sigmaSpace=sigmaSpace)
# gray = cv2.cvtColor(blurred, cv2.COLOR_BGR2GRAY)
# sigma = 3
# gray = cv2.GaussianBlur(gray, ksize=(0, 0), sigmaX=sigma)
# cv2.imshow("cv: gray", gray)
# while True:
# c = cv2.waitKey(0)
# if c == ord('q'):
# sys.exit(1)
cmyk = bgr2cmyk(blurred)
to_draw = {}
N_hatches = args.N_hatches
for i, name in enumerate("CMYK"):
to_draw[name] = multi_hatch(cmyk[:, :, i],
args.hatch_step_px,
contour_tolerance=1,
N_hatches=N_hatches,
dark=False)
to_draw[name] = [x[:, ::-1] for x in to_draw[name]] # swap x, y
if args.rotate:
to_draw = rotate(to_draw)
page_conf = load_page_conf(args.format)
x_margin_mm = args.margins
y_margin_mm = args.margins
H = page_conf['H'] # 210 # A4
W = page_conf['W'] # 297 # A4
# to_draw = rotate(to_draw)
to_draw = resize_and_center(to_draw, H, W, x_margin_mm, x_margin_mm,
y_margin_mm, y_margin_mm)
border = rounded_rect(drawing_bbox(to_draw), 15)
vis_drawing([border], 'b:', linewidth=0.5)
to_draw = mask_drawing(to_draw, border)
to_draw = optimize(to_draw,
line_simplification_threshold=0.1,
path_drop_threshold=2.0,
path_join_threshold=1.0)
vis_drawing(to_draw,
layer_options={
'C': (['c-'], dict(linewidth=0.1, alpha=0.5)),
'M': (['m-'], dict(linewidth=0.1, alpha=0.5)),
'Y': (['y-'], dict(linewidth=0.1, alpha=0.5)),
'K': (['k-'], dict(linewidth=0.1, alpha=0.5)),
})
plt.plot([0, W, W, 0, 0], [0, 0, H, H, 0], 'k:')
plt.show()
with Plotter('/dev/ttyUSB0', 9600) as p:
p.load_config(args.opconfig)
p.set_input_limits((0, 0), (W, 0), (0, H), (W, H))
p.draw_polylines(to_draw)
# cv2.imshow("cv: canvas", canvas)
# while True:
# c = cv2.waitKey(0)
# if c == ord('q'):
# break
# plt.contour(gray, levels=levels,
# colors='k', linewidths=0.1)
# plt.axis('equal')
# plt.gca().invert_yaxis()
# plt.show()
return 0