def hex_socket1(params, document):
d1 = params['d1']
d2 = params['d2']
b1 = params['b1']
b2 = params['b2']
b3 = params['b3']
k_max = params['k_max']
s = params['s']
t = params['t']
L = params['L']
h_max = params['h_max']
l = params['l']
if l <= L:
b = l - k_max - h_max
elif l < 125:
b = b1
elif l < 200:
b = b2
else:
b = b3
if b < 0:
raise ValueError("Invalid threaded length: %s" % b)
h = l - k_max - b
#head
head = makeCone(0.5 * d2, 0.5 * d1, k_max)
#socket
a = s / math.tan(math.pi / 3.)
box1 = makeBox(a, s, t)
box1.translate(Vector(-0.5 * a, -0.5 * s, 0))
box1.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 30)
box2 = makeBox(a, s, t)
box2.translate(Vector(-0.5 * a, -0.5 * s, 0))
box2.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 150)
box3 = makeBox(a, s, t)
box3.translate(Vector(-0.5 * a, -0.5 * s, 0))
box3.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 270)
socket = box1.fuse(box2).fuse(box3)
shaft_unthreaded = makeCylinder(0.5 * d1, h + k_max)
shaft_threaded = makeCylinder(0.5 * d1, b)
shaft_threaded.translate(Vector(0, 0, h + k_max))
name = params['name']
part = document.addObject("Part::Feature", "BOLTS_part")
part.Label = name
part.Shape = head.fuse(shaft_unthreaded).cut(socket).removeSplitter().fuse(
shaft_threaded)
#color thread
color_face(part, 1)
def hex_socket1(params, document):
d1 = params["d1"]
d2 = params["d2"]
b1 = params["b1"]
b2 = params["b2"]
b3 = params["b3"]
k_max = params["k_max"]
s = params["s"]
t = params["t"]
L = params["L"]
h_max = params["h_max"]
le = params["l"]
if le <= L:
b = le - k_max - h_max
elif le < 125:
b = b1
elif le < 200:
b = b2
else:
b = b3
if b < 0:
raise ValueError("Invalid threaded length: %s" % b)
h = le - k_max - b
# head
head = makeCone(0.5 * d2, 0.5 * d1, k_max)
# socket
a = s / math.tan(math.pi / 3.0)
box1 = makeBox(a, s, t)
box1.translate(Vector(-0.5 * a, -0.5 * s, 0))
box1.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 30)
box2 = makeBox(a, s, t)
box2.translate(Vector(-0.5 * a, -0.5 * s, 0))
box2.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 150)
box3 = makeBox(a, s, t)
box3.translate(Vector(-0.5 * a, -0.5 * s, 0))
box3.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 270)
socket = box1.fuse(box2).fuse(box3)
shaft_unthreaded = makeCylinder(0.5 * d1, h + k_max)
shaft_threaded = makeCylinder(0.5 * d1, b)
shaft_threaded.translate(Vector(0, 0, h + k_max))
name = params["name"]
part = document.addObject("Part::Feature", "BOLTS_part")
part.Label = name
part.Shape = head.fuse(shaft_unthreaded).cut(socket).removeSplitter().fuse(
shaft_threaded)
# color thread
color_face(part, 1)
def hex_socket1(params,document):
d1 = params['d1']
d2 = params['d2']
b1 = params['b1']
b2 = params['b2']
b3 = params['b3']
k_max = params['k_max']
s = params['s']
t = params['t']
L = params['L']
h_max = params['h_max']
l = params['l']
if l <= L:
b = l - k_max - h_max
elif l < 125:
b = b1
elif l < 200:
b = b2
else:
b = b3
if b < 0:
raise ValueError("Invalid threaded length: %s" % b)
h = l - k_max - b
#head
head = makeCone(0.5*d2,0.5*d1,k_max)
#socket
a = s/math.tan(math.pi/3.)
box1 = makeBox(a,s,t)
box1.translate(Vector(-0.5*a,-0.5*s,0))
box1.rotate(Vector(0,0,0),Vector(0,0,1),30)
box2 = makeBox(a,s,t)
box2.translate(Vector(-0.5*a,-0.5*s,0))
box2.rotate(Vector(0,0,0),Vector(0,0,1),150)
box3 = makeBox(a,s,t)
box3.translate(Vector(-0.5*a,-0.5*s,0))
box3.rotate(Vector(0,0,0),Vector(0,0,1),270)
socket = box1.fuse(box2).fuse(box3)
shaft_unthreaded = makeCylinder(0.5*d1,h+k_max)
shaft_threaded = makeCylinder(0.5*d1,b)
shaft_threaded.translate(Vector(0,0,h+k_max))
name = params['name']
part = document.addObject("Part::Feature","BOLTS_part")
part.Label = name
part.Shape = head.fuse(shaft_unthreaded).cut(socket).removeSplitter().fuse(shaft_threaded)
#color thread
color_face(part,1)
def hex_socket2(params, document):
d1 = params['d1']
d2 = params['d2']
b = params['b']
k = params['k']
s = params['s']
t = params['t_min']
L = params['L']
l = params['l']
if l <= L:
h = 0
else:
h = l - b
if h < 0:
raise ValueError("l is too short, resulting in negative h")
#head
head = makeCylinder(0.5 * d2, k)
#socket
a = s / math.tan(math.pi / 3.)
box1 = makeBox(a, s, t)
box1.translate(Vector(-0.5 * a, -0.5 * s, 0))
box1.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 30)
box2 = makeBox(a, s, t)
box2.translate(Vector(-0.5 * a, -0.5 * s, 0))
box2.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 150)
box3 = makeBox(a, s, t)
box3.translate(Vector(-0.5 * a, -0.5 * s, 0))
box3.rotate(Vector(0, 0, 0), Vector(0, 0, 1), 270)
socket = box1.fuse(box2).fuse(box3)
shaft_unthreaded = makeCylinder(0.5 * d1, h + k)
shaft_threaded = makeCylinder(0.5 * d1, b)
shaft_threaded.translate(Vector(0, 0, h + k))
name = params['name']
part = document.addObject("Part::Feature", "BOLTS_part")
part.Label = name
part.Shape = head.fuse(shaft_unthreaded).cut(socket).removeSplitter().fuse(
shaft_threaded)
#color thread
color_face(part, 1)
def hex_socket2(params,document):
d1 = params['d1']
d2 = params['d2']
b = params['b']
k = params['k']
s = params['s']
t = params['t_min']
L = params['L']
l = params['l']
if l <= L:
h = 0
else:
h = l - b
if h < 0:
raise ValueError("l is too short, resulting in negative h")
#head
head = makeCylinder(0.5*d2,k)
#socket
a = s/math.tan(math.pi/3.)
box1 = makeBox(a,s,t)
box1.translate(Vector(-0.5*a,-0.5*s,0))
box1.rotate(Vector(0,0,0),Vector(0,0,1),30)
box2 = makeBox(a,s,t)
box2.translate(Vector(-0.5*a,-0.5*s,0))
box2.rotate(Vector(0,0,0),Vector(0,0,1),150)
box3 = makeBox(a,s,t)
box3.translate(Vector(-0.5*a,-0.5*s,0))
box3.rotate(Vector(0,0,0),Vector(0,0,1),270)
socket = box1.fuse(box2).fuse(box3)
shaft_unthreaded = makeCylinder(0.5*d1,h+k)
shaft_threaded = makeCylinder(0.5*d1,b)
shaft_threaded.translate(Vector(0,0,h+k))
name = params['name']
part = document.addObject("Part::Feature","BOLTS_part")
part.Label = name
part.Shape = head.fuse(shaft_unthreaded).cut(socket).removeSplitter().fuse(shaft_threaded)
#color thread
color_face(part,1)
