def posteriseAndEdge():
"""This method creates and returns a post-process effect that posterises
the back buffer and draws black edges. It does this by using a Kuwahara
filter, which is a noise-reduction filter that preserves edges. It then
performs edge detection and dilation and blends the results back over the
posterised back buffer."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
backBufferCopyB = rt('PostProcessing/backBufferCopyB')
downSample1 = rt('PostProcessing/downSample1')
downSample1B = rt('PostProcessing/downSample1B')
c = buildBackBufferCopyPhase(backBufferCopy)
c2 = buildBackBufferCopyPhase(backBufferCopyB)
d0 = buildDownSamplePhase(backBufferCopy.texture, downSample1)
computeMeanVariance = buildMeanVariancePhase(downSample1.texture, downSample1B)
selectVariance = buildVarianceSelectPhase(downSample1B.texture, None)
s = build9TapFilterPhase(backBufferCopyB.texture, backBufferCopy, edgeDetectFilter)
d = buildEdgeDilationPhase(backBufferCopy.texture, backBufferCopyB)
t = buildTransferPhase(backBufferCopyB.texture, BW_BLEND_ZERO, BW_BLEND_SRCCOLOR)
e = Effect()
e.name = 'Posterise and Edge'
e.phases = [c,
c2,
d0,
computeMeanVariance,
selectVariance,
s,
d,
t]
return e
def bloom(filterMode=0,
attenuation=(1, 1, 1, 1),
numPasses=3,
width=1.0,
power=8):
"""This method creates and returns a bloom post-process effect. It assumes
the scene has been captured and downsampled into the downSample3 render target."""
downSample3 = rt('PostProcessing/downSample3')
computeBuffer1 = rt('PostProcessing/computeBuffer1')
computeBuffer2 = rt('PostProcessing/computeBuffer2')
c0 = buildColourScalePhase(downSample3.texture, computeBuffer2)
c0.material.power = power
phases = [c0]
for n in xrange(0, numPasses):
bh = buildBlurPhase(computeBuffer2.texture, computeBuffer1, True,
filterMode, width)
bh.material.attenuation = attenuation
bv = buildBlurPhase(computeBuffer1.texture, computeBuffer2, False,
filterMode, width)
phases.append(bh)
phases.append(bv)
width *= 2.0
t = buildTransferPhase(computeBuffer2.texture, BW_BLEND_SRCALPHA,
BW_BLEND_ONE)
phases.append(t)
e = Effect()
e.name = 'Bloom'
e.phases = phases
return e
def playerFader():
"""This method creates and returns a post-process effect that fades
out the player when they get too close to the camera.
This effect only works in the client, as there is no player in the tools."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
e = Effect()
e.name = 'Player Fader'
try:
from _PostProcessing import PlayerFader
p = PlayerFader()
except:
p = None
if p is not None:
c = buildBackBufferCopyPhase(backBufferCopy)
p.renderTarget = backBufferCopy
p.clearRenderTarget = False
p.name = 'Player Fader'
t = buildTransferPhase(backBufferCopy.texture, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
t.material.alphaOverdrive = 255.0
t.material.alpha = p.opacity
t.material.alphaTestEnable = True
t.material.alphaReference = 1
e.bypass = p.opacity
e.phases = [c, p, t]
else:
e.phases = []
return e
def depthOfFieldMultiBlur():
"""This method creates and returns a post-process effect that performs
depth-of-field, using 3 different sized blur textures, and blends them
together.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
fpComputeBuffer1 = rt('PostProcessing/fpComputeBuffer1')
downSampleBlur1 = rt('PostProcessing/downSampleBlur1')
downSampleBlur2 = rt('PostProcessing/downSampleBlur2')
downSampleBlur3 = rt('PostProcessing/downSampleBlur3')
c = buildBackBufferCopyPhase(backBufferCopy)
b = buildPhase(backBufferCopy.texture, None,
'shaders/post_processing/depth_of_field3.fx',
straightTransfer4Tap, BW_BLEND_SRCALPHA,
BW_BLEND_INVSRCALPHA)
b.name = 'depth of field (multi-blur)'
m = b.material
m.depthBlurTexture = fpComputeBuffer1.texture
m.blurTexture1 = downSampleBlur1.texture
m.blurTexture2 = downSampleBlur2.texture
m.blurTexture3 = downSampleBlur3.texture
e = Effect()
e.name = 'Depth of Field (multi-blur)'
e.phases = [c, b]
return e
def blur(filterMode=0, attenuation=(1, 1, 1, 1), numPasses=1, width=1.0):
"""This method creates and returns a blur post-process effect. It assumes
the scene has been captured and downsampled into the downSample3 render target."""
downSample3 = rt('PostProcessing/downSample3')
computeBuffer1 = rt('PostProcessing/computeBuffer1')
computeBuffer2 = rt('PostProcessing/computeBuffer2')
phases = []
if numPasses > 0:
bh = buildBlurPhase(downSample3.texture, computeBuffer1, True,
filterMode, width)
bh.material.attenuation = attenuation
bv = buildBlurPhase(computeBuffer1.texture, computeBuffer2, False,
filterMode, width)
phases.append(bh)
phases.append(bv)
if numPasses > 1:
bh = buildBlurPhase(computeBuffer2.texture, computeBuffer1, True,
filterMode, width)
bh.material.attenuation = attenuation
bv = buildBlurPhase(computeBuffer1.texture, computeBuffer2, False,
filterMode, width)
for n in xrange(1, numPasses):
phases.append(bh)
phases.append(bv)
t = buildTransferPhase(computeBuffer2.texture, BW_BLEND_SRCALPHA,
BW_BLEND_ZERO)
phases.append(t)
e = Effect()
e.name = 'Blur'
e.phases = phases
return e
def posteriseAndEdge():
"""This method creates and returns a post-process effect that posterises
the back buffer and draws black edges. It does this by using a Kuwahara
filter, which is a noise-reduction filter that preserves edges. It then
performs edge detection and dilation and blends the results back over the
posterised back buffer."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
backBufferCopyB = rt('PostProcessing/backBufferCopyB')
downSample1 = rt('PostProcessing/downSample1')
downSample1B = rt('PostProcessing/downSample1B')
c = buildBackBufferCopyPhase(backBufferCopy)
c2 = buildBackBufferCopyPhase(backBufferCopyB)
d0 = buildDownSamplePhase(backBufferCopy.texture, downSample1)
computeMeanVariance = buildMeanVariancePhase(downSample1.texture, downSample1B)
selectVariance = buildVarianceSelectPhase(downSample1B.texture, None)
s = build9TapFilterPhase(backBufferCopyB.texture, backBufferCopy, edgeDetectFilter)
d = buildEdgeDilationPhase(backBufferCopy.texture, backBufferCopyB)
t = buildTransferPhase(backBufferCopyB.texture, BW_BLEND_ZERO, BW_BLEND_SRCCOLOR)
e = Effect()
e.name = 'Posterise and Edge'
e.phases = [c,
c2,
d0,
computeMeanVariance,
selectVariance,
s,
d,
t]
return e
def multiBlur(filterMode = 0):
"""This method creates and returns an effect that down-samples and
blurs the back-buffer. *It relies on the down sample buffers already
having been created*. It fills the downSampleBlur1/2/3 render targets."""
downSample1 = rt('PostProcessing/downSample1')
downSample1B = rt('PostProcessing/downSample1B')
downSample2B = rt('PostProcessing/downSample2B')
downSample3B = rt('PostProcessing/downSample3B')
downSampleBlur1 = rt('PostProcessing/downSampleBlur1')
downSampleBlur2 = rt('PostProcessing/downSampleBlur2')
downSampleBlur3 = rt('PostProcessing/downSampleBlur3')
bh1 = buildBlurPhase(downSample1.texture, downSample1B, True, filterMode, 1.0)
bv1 = buildBlurPhase(downSample1B.texture, downSampleBlur1, False, filterMode, 1.0)
bh2 = buildBlurPhase(downSampleBlur1.texture, downSample2B, True, filterMode, 1.0)
bv2 = buildBlurPhase(downSample2B.texture, downSampleBlur2, False, filterMode, 1.0)
bh2a = buildBlurPhase(downSampleBlur2.texture, downSample2B, True, filterMode, 1.0)
bv2a = buildBlurPhase(downSample2B.texture, downSampleBlur2, False, filterMode, 1.0)
bh3 = buildBlurPhase(downSampleBlur2.texture, downSample3B, True, filterMode, 1.0)
bv3 = buildBlurPhase(downSample3B.texture, downSampleBlur3, False, filterMode, 1.0)
bh3a = buildBlurPhase(downSampleBlur3.texture, downSample3B, True, filterMode, 1.0)
bv3a = buildBlurPhase(downSample3B.texture, downSampleBlur3, False, filterMode, 1.0)
e = Effect()
e.name = 'Multi Blur'
phases = [bh1,
bv1,
bh2,
bv2,
bh3,
bv3,
bh3a,
bv3a]
e.phases = phases
return e
def streak():
"""This method creates and returns a variation on the standard bloom
post-process effect. It only performs horizontal blurs, thus producing
more of a streak than a blur."""
downSample3 = rt('PostProcessing/downSample3')
computeBuffer1 = rt('PostProcessing/computeBuffer1')
computeBuffer2 = rt('PostProcessing/computeBuffer2')
c0 = buildColourScalePhase(downSample3.texture, computeBuffer2)
phases = [c0]
width = 1.0
for i in xrange(0, 2):
bh = buildBlurPhase(computeBuffer2.texture, computeBuffer1, True, 0,
width)
phases.append(bh)
bh2 = buildBlurPhase(computeBuffer1.texture, computeBuffer2, True, 0,
width * 2.0)
phases.append(bh2)
width *= 4.0
t = buildTransferPhase(computeBuffer2.texture, BW_BLEND_SRCALPHA,
BW_BLEND_ONE)
phases.append(t)
e = Effect()
e.name = 'Bloom (Streak)'
e.phases = phases
return e
def multiBlur(filterMode = 0):
"""This method creates and returns an effect that down-samples and
blurs the back-buffer. *It relies on the down sample buffers already
having been created*. It fills the downSampleBlur1/2/3 render targets."""
downSample1 = rt('PostProcessing/downSample1')
downSample1B = rt('PostProcessing/downSample1B')
downSample2B = rt('PostProcessing/downSample2B')
downSample3B = rt('PostProcessing/downSample3B')
downSampleBlur1 = rt('PostProcessing/downSampleBlur1')
downSampleBlur2 = rt('PostProcessing/downSampleBlur2')
downSampleBlur3 = rt('PostProcessing/downSampleBlur3')
bh1 = buildBlurPhase(downSample1.texture, downSample1B, True, filterMode, 1.0)
bv1 = buildBlurPhase(downSample1B.texture, downSampleBlur1, False, filterMode, 1.0)
bh2 = buildBlurPhase(downSampleBlur1.texture, downSample2B, True, filterMode, 1.0)
bv2 = buildBlurPhase(downSample2B.texture, downSampleBlur2, False, filterMode, 1.0)
bh2a = buildBlurPhase(downSampleBlur2.texture, downSample2B, True, filterMode, 1.0)
bv2a = buildBlurPhase(downSample2B.texture, downSampleBlur2, False, filterMode, 1.0)
bh3 = buildBlurPhase(downSampleBlur2.texture, downSample3B, True, filterMode, 1.0)
bv3 = buildBlurPhase(downSample3B.texture, downSampleBlur3, False, filterMode, 1.0)
bh3a = buildBlurPhase(downSampleBlur3.texture, downSample3B, True, filterMode, 1.0)
bv3a = buildBlurPhase(downSample3B.texture, downSampleBlur3, False, filterMode, 1.0)
e = Effect()
e.name = 'Multi Blur'
phases = [bh1,
bv1,
bh2,
bv2,
bh3,
bv3,
bh3a,
bv3a]
e.phases = phases
return e
def blur(filterMode = 0, attenuation = (1, 1, 1, 1), numPasses = 1, width = 1.0):
"""This method creates and returns a blur post-process effect. It assumes
the scene has been captured and downsampled into the downSample3 render target."""
downSample3 = rt('PostProcessing/downSample3')
computeBuffer1 = rt('PostProcessing/computeBuffer1')
computeBuffer2 = rt('PostProcessing/computeBuffer2')
phases = []
if numPasses > 0:
bh = buildBlurPhase(downSample3.texture, computeBuffer1, True, filterMode, width)
bh.material.attenuation = attenuation
bv = buildBlurPhase(computeBuffer1.texture, computeBuffer2, False, filterMode, width)
phases.append(bh)
phases.append(bv)
if numPasses > 1:
bh = buildBlurPhase(computeBuffer2.texture, computeBuffer1, True, filterMode, width)
bh.material.attenuation = attenuation
bv = buildBlurPhase(computeBuffer1.texture, computeBuffer2, False, filterMode, width)
for n in xrange(1, numPasses):
phases.append(bh)
phases.append(bv)
t = buildTransferPhase(computeBuffer2.texture, BW_BLEND_SRCALPHA, BW_BLEND_ZERO)
phases.append(t)
e = Effect()
e.name = 'Blur'
e.phases = phases
return e
def sharpen():
"""This method creates and returns a post-process effect that sharpens
the back buffer. It does this by using a generic sharpening filter kernel.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
s = build9TapFilterPhase(backBufferCopy.texture, None, sharpFilter)
e = Effect()
e.name = 'Sharpen'
e.phases = [c, s]
return e
def colourCorrectHSV():
"""This method creates and returns a post-process effect that performs
hsv colour correction, or tone mapping, based on the colour_correct_hsv.fx effect.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
e = Effect()
e.name = _hsvColourCorrectEffectName
c = buildBackBufferCopyPhase(backBufferCopy)
p = buildHSVColourCorrectionPhase(backBufferCopy.texture, None)
e.phases = [c, p]
return e
def sharpen():
"""This method creates and returns a post-process effect that sharpens
the back buffer. It does this by using a generic sharpening filter kernel.
"""
backBufferCopy = rt("PostProcessing/backBufferCopy")
c = buildBackBufferCopyPhase(backBufferCopy)
s = build9TapFilterPhase(backBufferCopy.texture, None, sharpFilter)
e = Effect()
e.name = "Sharpen"
e.phases = [c, s]
return e
def colourCorrect(texName = 'system/maps/post_processing/colour_correct.dds'):
"""This method creates and returns a post-process effect that performs
colour correction, or tone mapping, based on the colour_correct.fx effect.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
e = Effect()
e.name = _colourCorrectEffectName
c = buildBackBufferCopyPhase(backBufferCopy)
p = buildColourCorrectionPhase(backBufferCopy.texture, texName, None)
e.phases = [c, p]
return e
def emboss():
"""This method creates and returns a post-process effect that performs
greyscale embossing using a simple filter-kernel."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
g = buildGreyscalePhase(backBufferCopy.texture, None)
s = build9TapFilterPhase(backBufferCopy.texture, None, embossFilter)
e = Effect()
e.name = 'Emboss'
e.phases = [c, g, c, s]
return e
def edgeDetect():
"""This method creates and returns a post-process effect that performs
edge detection and dilation of the resultant edges."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
s = build9TapFilterPhase(backBufferCopy.texture, None, edgeDetectFilter)
d = buildEdgeDilationPhase(backBufferCopy.texture, None)
e = Effect()
e.name = 'Edge Detect'
e.phases = [c, s, c, d]
return e
def FXAA():
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
lum = buildPhase(backBufferCopy.texture, None, 'shaders/anti_aliasing/fxaa_worldeditor_integration_luminance.fx', straightTransfer4Tap, BW_BLEND_ONE, BW_BLEND_ZERO)
lum.name = 'luminance'
lum.renderTarget = backBufferCopy
r = buildPhase(backBufferCopy.texture, None, 'shaders/anti_aliasing/fxaa_worldeditor_integration.fx', straightTransfer4Tap, BW_BLEND_ONE, BW_BLEND_ZERO)
r.name = 'transfer'
e = Effect()
e.name = 'FXAA'
e.phases = [c, lum, r]
return e
def depthOfFieldVariableCoC():
"""This method creates and returns a post-process effect that performs
depth-of-field, using a variable-sized convolution kernel.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
fpComputeBuffer1 = rt('PostProcessing/fpComputeBuffer1')
c = buildBackBufferCopyPhase(backBufferCopy)
t = buildDOFVariableCoCPhase(backBufferCopy.texture, fpComputeBuffer1.texture, None, stochasticSample)
e = Effect()
e.name = 'Depth of Field (variable filter)'
e.phases = [c, t]
return e
def distortionTransfer(distortionTexture):
"""This method creates and returns a post-process effect that redraws
the screen, using a normal map to distort the image. Use this for
a fish-eye effect, full-screen shimmer/distort etc.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
r = buildPhase(backBufferCopy.texture, None, 'shaders/post_processing/legacy/transfer_distort.fx', straightTransfer4Tap, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
r.name = 'distort and transfer'
r.material.distortionTexture = distortionTexture
e = Effect()
e.name = 'Distort and Transfer'
e.phases = [c, r]
return e
def emboss():
"""This method creates and returns a post-process effect that performs
greyscale embossing using a simple filter-kernel."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
g = buildGreyscalePhase(backBufferCopy.texture, None)
s = build9TapFilterPhase(backBufferCopy.texture, None, embossFilter)
e = Effect()
e.name = 'Emboss'
e.phases = [c,
g,
c,
s]
return e
def edgeDetect():
"""This method creates and returns a post-process effect that performs
edge detection and dilation of the resultant edges."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
s = build9TapFilterPhase(backBufferCopy.texture, None, edgeDetectFilter)
d = buildEdgeDilationPhase(backBufferCopy.texture, None)
e = Effect()
e.name = 'Edge Detect'
e.phases = [c,
s,
c,
d]
return e
def rainbow():
"""This method creates and returns a post-process effect that draws
a rainbow, using the angle between the camera and the sun and a MIE
scattering diagram lookup texture.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
r = buildPhase(backBufferCopy.texture, None, 'shaders/post_processing/legacy/rainbow.fx', straightTransfer4Tap, BW_BLEND_ONE, BW_BLEND_ONE)
r.name = 'decode lee diagram'
r.material.lookupTexture = 'system/maps/post_processing/lee_diagram.bmp'
e = Effect()
e.name = 'Rainbow'
e.phases = [c, r]
return e
def lensExplicit():
"""This method creates and returns a post-process effect that performs
lens simulation. It allows direct control over the depth-of-field area
and the falloff gradients. It outputs to an intermediate buffer,
designed for use by one of the depth-of-field simulations.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
fpComputeBuffer1 = rt('PostProcessing/fpComputeBuffer1')
c = buildBackBufferCopyPhase(backBufferCopy)
w = buildExplicitLensSimulationPhase(backBufferCopy.texture, fpComputeBuffer1)
e = Effect()
e.name = 'Explicit Lens Simulation'
e.phases = [c, w]
return e
def filmGrain():
"""This method creates and returns a post-process effect that draws
film grain, using 7 texture maps and a 'punch card' texture. The
'punch card' is a 7 * n bmp that describes the position on-screen
of each of the 7 maps at any time..
"""
textures = []
base = 'system/maps/post_processing/film_grain/'
backBufferCopy = rt('PostProcessing/backBufferCopy')
bbc = buildBackBufferCopyPhase(backBufferCopy)
c = buildColourCorrectionPhase(
backBufferCopy.texture,
'system/maps/post_processing/film_grain/colour_correct_oldfilm.bmp',
None)
for i in xrange(0, 2):
textures.append('%sscratch_0%s.tga' % (base, str(i + 1)))
for i in xrange(0, 4):
textures.append('%sdirt_0%s.tga' % (base, str(i + 1)))
punchcard = base + 'oldfilm_punchcard.bmp'
fg = buildFilmGrainPhase(textures, punchcard, None,
'shaders/post_processing/legacy/film_grain.fx',
straightTransfer4Tap, BW_BLEND_SRCALPHA,
BW_BLEND_INVSRCALPHA)
textures = []
for i in xrange(2, 4):
textures.append('%sscratch_0%s.tga' % (base, str(i + 1)))
for i in xrange(4, 8):
textures.append('%sdirt_0%s.tga' % (base, str(i + 1)))
punchcard = base + 'oldfilm_punchcard.bmp'
fg2 = buildFilmGrainPhase(textures, punchcard, None,
'shaders/post_processing/legacy/film_grain.fx',
straightTransfer4Tap, BW_BLEND_SRCALPHA,
BW_BLEND_INVSRCALPHA)
fg2.material.punchcardOffset = 0.5
v = buildVignettePhase()
e = Effect()
e.name = _effectName
e.phases = [bbc, c, fg, fg2, v]
fg.material.alpha = 0.3
fg.material.speed = 0.3
fg.material.scale = 50.0
fg2.material.alpha = 0.12
fg.material.speed = 0.01
fg2.material.scale = 21.0
return e
def lensSimulation():
"""This method creates and returns a post-process effect that performs
lens simulation. It does this mathematically via the thin-lens formula,
simulating focal length, aperture and zFocus. It outputs to an
intermediate buffer, designed for use by one of the depth-of-field
simulations.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
fpComputeBuffer1 = rt('PostProcessing/fpComputeBuffer1')
c = buildBackBufferCopyPhase(backBufferCopy)
w = buildThinLensSimulationPhase(backBufferCopy.texture, fpComputeBuffer1)
e = Effect()
e.name = 'Thin Lens Simulation'
e.phases = [c, w]
return e
def hatching(texName = 'system/maps/post_processing/hatching.dds'):
"""This method creates and returns a post-process effect that performs
hatching, or a pencil sketch effect. It requires the back buffer,
and a texture containing 3 individual channels of response to the
different information created by processing the back buffer
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
p = buildPhase(backBufferCopy.texture, None, 'shaders/post_processing/legacy/hatching.fx', straightTransfer4Tap, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
p.name = 'hatching'
p.material.hatchTexture = 'system/maps/post_processing/hatch.bmp'
p.material.offsetTexture = 'system/maps/post_processing/hatch_offset.bmp'
e = Effect()
e.name = 'Hatching'
e.phases = [c, p]
return e
def shimmer():
"""This method creates and returns a post-process effect that emulates
heat shimmer. It uses the mask created by shimmer objects (those that
use the shimmer channel, and output alpha)."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
e = Effect()
c = pre = buildBackBufferCopyPhase(backBufferCopy)
p = buildPhase(backBufferCopy.texture, None, 'shaders/post_processing/heat_shimmer.fx')
p.name = 'heat shimmer'
p.filterQuad = VisualTransferMesh('system/models/fx_shimmer_transfer.visual')
e.phases = [c, p]
e.name = 'Heat Shimmer'
e.bypass = Math.Vector4Combiner()
e.bypass.a = Math.Vector4(0, 0, 0, 0)
e.bypass.b = BigWorld.PyShimmerCountProvider()
return e
def hatching(texName = 'system/maps/post_processing/hatching.dds'):
"""This method creates and returns a post-process effect that performs
hatching, or a pencil sketch effect. It requires the back buffer,
and a texture containing 3 individual channels of response to the
different information created by processing the back buffer
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
p = buildPhase(backBufferCopy.texture, None, 'shaders/post_processing/legacy/hatching.fx', straightTransfer4Tap, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
p.name = 'hatching'
p.material.hatchTexture = 'system/maps/post_processing/hatch.bmp'
p.material.offsetTexture = 'system/maps/post_processing/hatch_offset.bmp'
e = Effect()
e.name = 'Hatching'
e.phases = [c, p]
return e
def posterise():
"""This method creates and returns a post-process effect that posterises
the back buffer. It does this by using a Kuwahara filter, which is a
noise-reduction filter that preserves edges."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
downSample1 = rt('PostProcessing/downSample1')
downSample1B = rt('PostProcessing/downSample1B')
c = buildBackBufferCopyPhase(backBufferCopy)
d0 = buildDownSamplePhase(backBufferCopy.texture, downSample1)
computeMeanVariance = buildMeanVariancePhase(downSample1.texture,
downSample1B)
selectVariance = buildVarianceSelectPhase(downSample1B.texture, None)
e = Effect()
e.name = 'Posterise'
e.phases = [c, d0, computeMeanVariance, selectVariance]
return e
def distortionTransfer(distortionTexture):
"""This method creates and returns a post-process effect that redraws
the screen, using a normal map to distort the image. Use this for
a fish-eye effect, full-screen shimmer/distort etc.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
r = buildPhase(backBufferCopy.texture, None,
'shaders/post_processing/legacy/transfer_distort.fx',
straightTransfer4Tap, BW_BLEND_SRCALPHA,
BW_BLEND_INVSRCALPHA)
r.name = 'distort and transfer'
r.material.distortionTexture = distortionTexture
e = Effect()
e.name = 'Distort and Transfer'
e.phases = [c, r]
return e
def FXAA():
backBufferCopy = rt('PostProcessing/backBufferCopy')
c = buildBackBufferCopyPhase(backBufferCopy)
lum = buildPhase(
backBufferCopy.texture, None,
'shaders/anti_aliasing/fxaa_worldeditor_integration_luminance.fx',
straightTransfer4Tap, BW_BLEND_ONE, BW_BLEND_ZERO)
lum.name = 'luminance'
lum.renderTarget = backBufferCopy
r = buildPhase(backBufferCopy.texture, None,
'shaders/anti_aliasing/fxaa_worldeditor_integration.fx',
straightTransfer4Tap, BW_BLEND_ONE, BW_BLEND_ZERO)
r.name = 'transfer'
e = Effect()
e.name = 'FXAA'
e.phases = [c, lum, r]
return e
def shimmer():
"""This method creates and returns a post-process effect that emulates
heat shimmer. It uses the mask created by shimmer objects (those that
use the shimmer channel, and output alpha)."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
e = Effect()
c = pre = buildBackBufferCopyPhase(backBufferCopy)
p = buildPhase(backBufferCopy.texture, None,
'shaders/post_processing/heat_shimmer.fx')
p.name = 'heat shimmer'
p.filterQuad = VisualTransferMesh(
'system/models/fx_shimmer_transfer.visual')
e.phases = [c, p]
e.name = 'Heat Shimmer'
e.bypass = Math.Vector4Combiner()
e.bypass.a = Math.Vector4(0, 0, 0, 0)
e.bypass.b = BigWorld.PyShimmerCountProvider()
return e
def posterise():
"""This method creates and returns a post-process effect that posterises
the back buffer. It does this by using a Kuwahara filter, which is a
noise-reduction filter that preserves edges."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
downSample1 = rt('PostProcessing/downSample1')
downSample1B = rt('PostProcessing/downSample1B')
c = buildBackBufferCopyPhase(backBufferCopy)
d0 = buildDownSamplePhase(backBufferCopy.texture, downSample1)
computeMeanVariance = buildMeanVariancePhase(downSample1.texture, downSample1B)
selectVariance = buildVarianceSelectPhase(downSample1B.texture, None)
e = Effect()
e.name = 'Posterise'
e.phases = [c,
d0,
computeMeanVariance,
selectVariance]
return e
def filmGrain():
"""This method creates and returns a post-process effect that draws
film grain, using 7 texture maps and a 'punch card' texture. The
'punch card' is a 7 * n bmp that describes the position on-screen
of each of the 7 maps at any time..
"""
textures = []
base = 'system/maps/post_processing/film_grain/'
backBufferCopy = rt('PostProcessing/backBufferCopy')
bbc = buildBackBufferCopyPhase(backBufferCopy)
c = buildColourCorrectionPhase(backBufferCopy.texture, 'system/maps/post_processing/film_grain/colour_correct_oldfilm.bmp', None)
for i in xrange(0, 2):
textures.append('%sscratch_0%s.tga' % (base, str(i + 1)))
for i in xrange(0, 4):
textures.append('%sdirt_0%s.tga' % (base, str(i + 1)))
punchcard = base + 'oldfilm_punchcard.bmp'
fg = buildFilmGrainPhase(textures, punchcard, None, 'shaders/post_processing/legacy/film_grain.fx', straightTransfer4Tap, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
textures = []
for i in xrange(2, 4):
textures.append('%sscratch_0%s.tga' % (base, str(i + 1)))
for i in xrange(4, 8):
textures.append('%sdirt_0%s.tga' % (base, str(i + 1)))
punchcard = base + 'oldfilm_punchcard.bmp'
fg2 = buildFilmGrainPhase(textures, punchcard, None, 'shaders/post_processing/legacy/film_grain.fx', straightTransfer4Tap, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
fg2.material.punchcardOffset = 0.5
v = buildVignettePhase()
e = Effect()
e.name = _effectName
e.phases = [bbc,
c,
fg,
fg2,
v]
fg.material.alpha = 0.3
fg.material.speed = 0.3
fg.material.scale = 50.0
fg2.material.alpha = 0.12
fg.material.speed = 0.01
fg2.material.scale = 21.0
return e
def scotopicVision(
colName="system/maps/post_processing/scotopic_vision.dds", noiseName="system/maps/post_processing/noise.texanim"
):
"""This method creates and returns a post-process effect that simulates
scotopic vision, or human night vision.
"""
backBufferCopy = rt("PostProcessing/backBufferCopy")
backBufferCopyB = rt("PostProcessing/backBufferCopyB")
e = Effect()
e.name = "Scotopic Vision"
c = buildBackBufferCopyPhase(backBufferCopy)
p = buildColourCorrectionPhase(backBufferCopy.texture, colName, backBufferCopyB)
t = buildPhase(backBufferCopy.texture, None, "shaders/post_processing/legacy/scotopic_vision.fx")
t.name = "scotopic vision"
t.material.noiseTexture = noiseName
t.material.colouredTexture = backBufferCopyB.texture
v = buildVignettePhase()
e.phases = [c, p, t, v]
return e
def downSample():
"""This method creates and returns an effect that down-samples the back-
buffer. This effect by itself doesn't achieve anything on its own,
however having downsampled versions of the scene are usually for other
effects. It fills the downSample1/2/3 render targets and also leaves
a copy of the back buffer in the backBufferCopy render target."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
downSample1 = rt('PostProcessing/downSample1')
downSample2 = rt('PostProcessing/downSample2')
downSample3 = rt('PostProcessing/downSample3')
pre = buildBackBufferCopyPhase(backBufferCopy)
d0 = buildDownSamplePhase(backBufferCopy.texture, downSample1)
d1 = buildDownSamplePhase(downSample1.texture, downSample2)
d2 = buildDownSamplePhase(downSample2.texture, downSample3)
e = Effect()
e.name = 'Down Sample'
phases = [pre, d0, d1, d2]
e.phases = phases
return e
def downSample():
"""This method creates and returns an effect that down-samples the back-
buffer. This effect by itself doesn't achieve anything on its own,
however having downsampled versions of the scene are usually for other
effects. It fills the downSample1/2/3 render targets and also leaves
a copy of the back buffer in the backBufferCopy render target."""
backBufferCopy = rt("PostProcessing/backBufferCopy")
downSample1 = rt("PostProcessing/downSample1")
downSample2 = rt("PostProcessing/downSample2")
downSample3 = rt("PostProcessing/downSample3")
pre = buildBackBufferCopyPhase(backBufferCopy)
d0 = buildDownSamplePhase(backBufferCopy.texture, downSample1)
d1 = buildDownSamplePhase(downSample1.texture, downSample2)
d2 = buildDownSamplePhase(downSample2.texture, downSample3)
e = Effect()
e.name = "Down Sample"
phases = [pre, d0, d1, d2]
e.phases = phases
return e
def depthOfFieldBokehControl():
"""Bokeh Control. This method creates and returns a post-process
effect that performs depth-of-field using variable-sized point
sprites to draw artist-supplied bokeh. It uses the alpha to
accumulate into a buffer.
It only draws far away blurs, to minimise the size of the render
target, which is a major impact on performance for this technique.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
fpComputeBuffer1 = rt('PostProcessing/fpComputeBuffer1')
bkComputeBuffer = rt('PostProcessing/bkComputeBuffer')
c = buildBackBufferCopyPhase(backBufferCopy)
b = buildDOFBokehControlPhase(backBufferCopy.texture, fpComputeBuffer1.texture, bkComputeBuffer)
t = buildDOFBokehControlTransferPhase(bkComputeBuffer.texture, fpComputeBuffer1.texture)
e = Effect()
e.name = 'Depth of Field (bokeh control)'
e.phases = [c, b, t]
m = b.material
m.bokehTexture = 'system/maps/post_processing/bokeh2.tga'
return e
def scotopicVision(colName='system/maps/post_processing/scotopic_vision.dds',
noiseName='system/maps/post_processing/noise.texanim'):
"""This method creates and returns a post-process effect that simulates
scotopic vision, or human night vision.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
backBufferCopyB = rt('PostProcessing/backBufferCopyB')
e = Effect()
e.name = 'Scotopic Vision'
c = buildBackBufferCopyPhase(backBufferCopy)
p = buildColourCorrectionPhase(backBufferCopy.texture, colName,
backBufferCopyB)
t = buildPhase(backBufferCopy.texture, None,
'shaders/post_processing/legacy/scotopic_vision.fx')
t.name = 'scotopic vision'
t.material.noiseTexture = noiseName
t.material.colouredTexture = backBufferCopyB.texture
v = buildVignettePhase()
e.phases = [c, p, t, v]
return e
def playerFader():
"""This method creates and returns a post-process effect that fades
out the player when they get too close to the camera.
This effect only works in the client, as there is no player in the tools."""
backBufferCopy = rt('PostProcessing/backBufferCopy')
e = Effect()
e.name = 'Player Fader'
try:
from _PostProcessing import PlayerFader
p = PlayerFader()
except:
p = None
if p is not None:
c = buildBackBufferCopyPhase(backBufferCopy)
p.renderTarget = backBufferCopy
p.clearRenderTarget = False
p.name = 'Player Fader'
t = buildTransferPhase(backBufferCopy.texture, BW_BLEND_SRCALPHA,
BW_BLEND_INVSRCALPHA)
t.material.alphaOverdrive = 255.0
t.material.alpha = p.opacity
t.material.alphaTestEnable = True
t.material.alphaReference = 1
e.bypass = p.opacity
e.phases = [c, p, t]
else:
e.phases = []
return e
def depthOfFieldMultiBlur():
"""This method creates and returns a post-process effect that performs
depth-of-field, using 3 different sized blur textures, and blends them
together.
"""
backBufferCopy = rt('PostProcessing/backBufferCopy')
fpComputeBuffer1 = rt('PostProcessing/fpComputeBuffer1')
downSampleBlur1 = rt('PostProcessing/downSampleBlur1')
downSampleBlur2 = rt('PostProcessing/downSampleBlur2')
downSampleBlur3 = rt('PostProcessing/downSampleBlur3')
c = buildBackBufferCopyPhase(backBufferCopy)
b = buildPhase(backBufferCopy.texture, None, 'shaders/post_processing/depth_of_field3.fx', straightTransfer4Tap, BW_BLEND_SRCALPHA, BW_BLEND_INVSRCALPHA)
b.name = 'depth of field (multi-blur)'
m = b.material
m.depthBlurTexture = fpComputeBuffer1.texture
m.blurTexture1 = downSampleBlur1.texture
m.blurTexture2 = downSampleBlur2.texture
m.blurTexture3 = downSampleBlur3.texture
e = Effect()
e.name = 'Depth of Field (multi-blur)'
e.phases = [c, b]
return e
def bloom(filterMode = 0, attenuation = (1, 1, 1, 1), numPasses = 3, width = 1.0, power = 8):
"""This method creates and returns a bloom post-process effect. It assumes
the scene has been captured and downsampled into the downSample3 render target."""
downSample3 = rt('PostProcessing/downSample3')
computeBuffer1 = rt('PostProcessing/computeBuffer1')
computeBuffer2 = rt('PostProcessing/computeBuffer2')
c0 = buildColourScalePhase(downSample3.texture, computeBuffer2)
c0.material.power = power
phases = [c0]
for n in xrange(0, numPasses):
bh = buildBlurPhase(computeBuffer2.texture, computeBuffer1, True, filterMode, width)
bh.material.attenuation = attenuation
bv = buildBlurPhase(computeBuffer1.texture, computeBuffer2, False, filterMode, width)
phases.append(bh)
phases.append(bv)
width *= 2.0
t = buildTransferPhase(computeBuffer2.texture, BW_BLEND_SRCALPHA, BW_BLEND_ONE)
phases.append(t)
e = Effect()
e.name = 'Bloom'
e.phases = phases
return e
def streak():
"""This method creates and returns a variation on the standard bloom
post-process effect. It only performs horizontal blurs, thus producing
more of a streak than a blur."""
downSample3 = rt('PostProcessing/downSample3')
computeBuffer1 = rt('PostProcessing/computeBuffer1')
computeBuffer2 = rt('PostProcessing/computeBuffer2')
c0 = buildColourScalePhase(downSample3.texture, computeBuffer2)
phases = [c0]
width = 1.0
for i in xrange(0, 2):
bh = buildBlurPhase(computeBuffer2.texture, computeBuffer1, True, 0, width)
phases.append(bh)
bh2 = buildBlurPhase(computeBuffer1.texture, computeBuffer2, True, 0, width * 2.0)
phases.append(bh2)
width *= 4.0
t = buildTransferPhase(computeBuffer2.texture, BW_BLEND_SRCALPHA, BW_BLEND_ONE)
phases.append(t)
e = Effect()
e.name = 'Bloom (Streak)'
e.phases = phases
return e
def registrationTest():
"""This method creates and returns an effect that tests
whether or not the transfer registration is correct. It
copies the back buffer and transfers it back over itself
a few times in order to see if any pixels are shifted. In
theory this should produce no visual effect at all"""
c = buildBackBufferCopyPhase(backBufferCopy)
t = buildTransferPhase(backBufferCopy.texture)
e = Effect()
e.name = 'Test Registration'
phases = [c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t,
c,
t]
e.phases = phases
import Math
e.bypass = Math.Vector4LFO()
e.bypass.period = 2.0
e.bypass.waveform = 'SQUARE'
return e
