def mTypeBoxCrrentIndexChanged(self, index):
# FIXME: sync with providers/ogr/qgsogrprovider.cpp
if isinstance(index, str) or isinstance(index, QString):
return
for case in switch(index):
if case(0): # Text data
if (int(self.ui.mWidth.text()) < 1
or int(self.ui.mWidth.text()) > 255):
self.ui.mWidth.setText("80")
self.ui.mPrecision.setEnabled(False)
self.ui.mWidth.setValidator(QIntValidator(1, 255, self))
break
elif case(1): # Whole number
if (int(self.ui.mWidth.text()) < 1
or int(self.ui.mWidth.text()) > 10):
self.ui.mWidth.setText("10")
self.ui.mPrecision.setEnabled(False)
self.ui.mWidth.setValidator(QIntValidator(1, 10, self))
break
elif case(2): # Decimal number
if (int(self.ui.mWidth.text()) < 1
or int(self.ui.mWidth.text()) > 20):
self.ui.mWidth.setText("20")
self.ui.mPrecision.setEnabled(True)
self.ui.mWidth.setValidator(QIntValidator(1, 20, self))
break
else:
QMessageBox.warning(self, "Warning", "unexpected index")
break
def createWidgetEndXY(self):
"""
Create widget
"""
self.endXyAndroidGroup = QGroupBox(self.tr(""))
endXyAndroidlayout = QGridLayout()
self.endxAndroidLine = QLineEdit(self)
validatorEndXAndroid = QIntValidator(self)
self.endxAndroidLine.setValidator(validatorEndXAndroid)
self.endxAndroidLine.installEventFilter(self)
self.endyAndroidLine = QLineEdit(self)
validatorEndYAndroid = QIntValidator(self)
self.endyAndroidLine.setValidator(validatorEndYAndroid)
self.endyAndroidLine.installEventFilter(self)
endXyAndroidlayout.addWidget(
QLabel(self.tr("Destination Coordinate X:")), 0, 0)
endXyAndroidlayout.addWidget(self.endxAndroidLine, 0, 1)
endXyAndroidlayout.addWidget(
QLabel(self.tr("Destination Coordinate Y:")), 1, 0)
endXyAndroidlayout.addWidget(self.endyAndroidLine, 1, 1)
self.endXyAndroidGroup.setLayout(endXyAndroidlayout)
self.endXyAndroidGroup.hide()
def __init__(self, parent):
QDialog.__init__(self, parent)
self.prm = self.parent().prm
self.currLocale = self.parent().prm['currentLocale']
self.currLocale.setNumberOptions(
self.currLocale.OmitGroupSeparator
| self.currLocale.RejectGroupSeparator)
grid = QGridLayout()
n = 0
blockALabel = QLabel(self.tr('Block A: '))
grid.addWidget(blockALabel, n, 0)
self.blockAWidget = QLineEdit(str(self.prm['currentBlock']))
self.blockAWidget.setValidator(QIntValidator(self))
grid.addWidget(self.blockAWidget, n, 1)
blockBLabel = QLabel(self.tr('Block B: '))
grid.addWidget(blockBLabel, n, 2)
self.blockBWidget = QLineEdit('')
self.blockBWidget.setValidator(QIntValidator(self))
grid.addWidget(self.blockBWidget, n, 3)
n = n + 1
buttonBox = QDialogButtonBox(QDialogButtonBox.Ok
| QDialogButtonBox.Cancel)
buttonBox.accepted.connect(self.accept)
buttonBox.rejected.connect(self.reject)
grid.addWidget(buttonBox, n, 3)
self.setLayout(grid)
self.setWindowTitle(self.tr("Swap Blocks"))
def __init__(self, config_name, parent=None):
super(ReplaceI18NDialog, self).__init__(parent)
self.parent = parent
grid_layout = QGridLayout()
grid_layout.addWidget(QLabel(u'表单名字/序号'), 0, 0)
self.sheet_index_input = QLineEdit(config_name, self)
grid_layout.addWidget(self.sheet_index_input, 0, 1)
grid_layout.addWidget(QLabel(u'列'), 1, 0)
self.column_input = QLineEdit("1", self)
int_validator = QIntValidator()
int_validator.setRange(1, 100)
self.column_input.setValidator(int_validator)
grid_layout.addWidget(self.column_input, 1, 1)
grid_layout.addWidget(QLabel(u'文件'), 2, 0)
self.file_input = QLineEdit("", self)
grid_layout.addWidget(self.file_input, 2, 1)
select_file_btn = QPushButton(u'选择')
grid_layout.addWidget(select_file_btn, 2, 2)
do_btn = QPushButton(u'替换')
main_layout = QVBoxLayout()
main_layout.addLayout(grid_layout)
main_layout.addWidget(do_btn)
self.setLayout(main_layout)
self.connect(select_file_btn, SIGNAL("clicked()"), self.select_file)
self.connect(do_btn, SIGNAL("clicked()"), self.replace)
def __init__(self):
QWidget.__init__(self)
self.setupUi(self)
self.pushButton_Add.clicked.connect(self.addIP)
validator = QIntValidator()
validator.setRange(0,255)
self.lineEdit_IP_1.setValidator(validator)
self.lineEdit_IP_2.setValidator(validator)
self.lineEdit_IP_3.setValidator(validator)
self.lineEdit_IP_4.setValidator(validator)
def __init__(self):
QWidget.__init__(self)
self.setupUi(self)
self.pushButton_Add.clicked.connect(self.addIP)
validator = QIntValidator()
validator.setRange(0, 255)
self.lineEdit_IP_1.setValidator(validator)
self.lineEdit_IP_2.setValidator(validator)
self.lineEdit_IP_3.setValidator(validator)
self.lineEdit_IP_4.setValidator(validator)
def __init__(self, parent=None):
super(EditorWidgetTms, self).__init__(parent)
self.setupUi(self)
self.tms_validator = LineEditColorValidator(
self.txtUrl,
'http[s]?://.+',
error_tooltip='http{s}://any_text/{z}/{x}/{y}/')
self.txtCrsId.setValidator(QIntValidator())
self.txtPostgisCrsId.setValidator(QIntValidator())
QApplication.instance().focusChanged.connect(self.focus_changed)
def __init__(self, parent=None):
super(QWidget, self).__init__(parent)
# Create the four widgets:
# 1, the line number widget
self.lnum = QLineEdit()
self.lnum.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
# allow up to 5 digits, and ensure only digits can be entered.
val = QIntValidator()
val.setRange(1,99999) # Line numbers start at 1
self.lnum.setValidator(val)
self.setWidth(self.lnum, 6)
# connect the lnum ReturnPressed signal to our slot for that
self.connect(self.lnum, SIGNAL("returnPressed()"), self.moveLine)
# 2, the column number display
self.cnum = QLabel()
self.cnum.setAlignment(Qt.AlignLeft | Qt.AlignVCenter)
self.setWidth(self.cnum, 3)
# 3, the png field. Scan image filenames are not always numeric!
self.image = QLineEdit()
self.image.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
self.setWidth(self.image, 6)
#val = QIntValidator()
#val.setRange(1,9999) # png numbers start at 1
#self.image.setValidator(val)
# Connect the image ReturnPressed signal to our slot for that
self.connect(self.image, SIGNAL("returnPressed()"), self.movePng)
# 4, the folio display
self.folio = QLabel()
self.folio.setAlignment(Qt.AlignLeft | Qt.AlignVCenter)
self.setWidth(self.folio, 12)
# Make a layout frame and lay the four things out in it with captions
# Line [ ] Column ( ) Image [ ] Folio ( )
hb = QHBoxLayout()
hb.addWidget(self.makeCaption(u"Line"))
hb.addWidget(self.lnum)
hb.addWidget(self.makeCaption(u"Column"))
hb.addWidget(self.cnum)
hb.addSpacing(5) # Qt doc doesn't say what the units are!
hb.addWidget(self.makeCaption(u"Image"))
hb.addWidget(self.image)
hb.addWidget(self.makeCaption(u"Folio"))
hb.addWidget(self.folio)
hb.addStretch() # add stretch on the right to make things compact left
self.setLayout(hb) # make it our layout
def createIntegerLineEdit(self, minimum=None, maximum=None, placeholder=""):
line_edit = ClearableLineEdit(placeholder=placeholder)
validator = QIntValidator()
if minimum is not None:
validator.setBottom(minimum)
if maximum is not None:
validator.setTop(maximum)
line_edit.setValidator(validator)
return line_edit
def ud_options(self):
""" Dialog ud_options.ui """
# Create dialog
dlg_udoptions = UDoptions()
utils_giswater.setDialog(dlg_udoptions)
dlg_udoptions.min_slope.setValidator(QDoubleValidator())
dlg_udoptions.lengthening_step.setValidator(QDoubleValidator())
dlg_udoptions.max_trials.setValidator(QIntValidator())
dlg_udoptions.sys_flow_tol.setValidator(QIntValidator())
dlg_udoptions.variable_step.setValidator(QIntValidator())
dlg_udoptions.min_surfarea.setValidator(QIntValidator())
dlg_udoptions.head_tolerance.setValidator(QDoubleValidator())
dlg_udoptions.lat_flow_tol.setValidator(QIntValidator())
# Set values from widgets of type QComboBox
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".inp_value_options_fu ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("flow_units", rows, False)
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".inp_value_options_fr ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("flow_routing", rows, False)
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".inp_value_options_lo ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("link_offsets", rows, False)
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".inp_value_options_fme ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("force_main_equation", rows, False)
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".inp_value_options_nfl ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("normal_flow_limited", rows, False)
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".inp_value_options_id ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("inertial_damping", rows, False)
sql = "SELECT DISTINCT(id) FROM " + self.schema_name + ".value_yesno ORDER BY id"
rows = self.dao.get_rows(sql)
utils_giswater.fillComboBox("allow_ponding", rows, False)
utils_giswater.fillComboBox("skip_steady_state", rows, False)
utils_giswater.fillComboBox("ignore_rainfall", rows, False)
utils_giswater.fillComboBox("ignore_snowmelt", rows, False)
utils_giswater.fillComboBox("ignore_groundwater", rows, False)
utils_giswater.fillComboBox("ignore_routing", rows, False)
utils_giswater.fillComboBox("ignore_quality", rows, False)
update = True
dlg_udoptions.btn_accept.pressed.connect(
partial(self.insert_or_update, update, 'inp_options',
dlg_udoptions))
dlg_udoptions.btn_cancel.pressed.connect(dlg_udoptions.close)
self.go2epa_options_get_data('inp_options')
dlg_udoptions.exec_()
def ud_options(self):
""" Dialog ud_options.ui """
# Create dialog
dlg_udoptions = UDoptions()
self.load_settings(dlg_udoptions)
dlg_udoptions.min_slope.setValidator(QDoubleValidator())
dlg_udoptions.lengthening_step.setValidator(QDoubleValidator())
dlg_udoptions.max_trials.setValidator(QIntValidator())
dlg_udoptions.sys_flow_tol.setValidator(QIntValidator())
dlg_udoptions.variable_step.setValidator(QIntValidator())
dlg_udoptions.min_surfarea.setValidator(QIntValidator())
dlg_udoptions.head_tolerance.setValidator(QDoubleValidator())
dlg_udoptions.lat_flow_tol.setValidator(QIntValidator())
# Set values from widgets of type QComboBox
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".inp_value_options_fu ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.flow_units, rows, False)
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".inp_value_options_fr ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.flow_routing, rows, False)
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".inp_value_options_lo ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.link_offsets, rows, False)
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".inp_value_options_fme ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.force_main_equation, rows, False)
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".inp_value_options_nfl ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.normal_flow_limited, rows, False)
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".inp_value_options_id ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.inertial_damping, rows, False)
sql = "SELECT DISTINCT(id) FROM "+self.schema_name+".value_yesno ORDER BY id"
rows = self.controller.get_rows(sql)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.allow_ponding, rows, False)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.skip_steady_state, rows, False)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.ignore_rainfall, rows, False)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.ignore_snowmelt, rows, False)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.ignore_groundwater, rows, False)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.ignore_routing, rows, False)
utils_giswater.fillComboBox(dlg_udoptions, dlg_udoptions.ignore_quality, rows, False)
dlg_udoptions.btn_accept.clicked.connect(partial(self.update_table, 'inp_options', dlg_udoptions))
dlg_udoptions.btn_cancel.clicked.connect(dlg_udoptions.close)
self.go2epa_options_get_data('inp_options', dlg_udoptions)
dlg_udoptions.setWindowFlags(Qt.WindowStaysOnTopHint)
dlg_udoptions.exec_()
def __init__(self, iface, parent=None):
super(PreVesperDialog, self).__init__(iface.mainWindow())
# Set up the user interface from Designer.
self.setupUi(self)
# The qgis interface
self.iface = iface
self.DISP_TEMP_LAYERS = read_setting(
PLUGIN_NAME + '/DISP_TEMP_LAYERS', bool)
self.DEBUG = config.get_debug_mode()
# Catch and redirect python errors directed at the log messages python
# error tab.
QgsMessageLog.instance().messageReceived.connect(errorCatcher)
if not os.path.exists(TEMPDIR):
os.mkdir(TEMPDIR)
# Setup for validation messagebar on gui-----------------------------
self.setWindowIcon(QtGui.QIcon(
':/plugins/pat/icons/icon_vesperKriging.svg'))
self.validationLayout = QtGui.QFormLayout(self)
# source: https://nathanw.net/2013/08/02/death-to-the-message-box-use-the-qgis-messagebar/
# Add the error messages to top of form via a message bar.
# leave this message bar for bailouts
self.messageBar = QgsMessageBar(self)
if isinstance(self.layout(), (QtGui.QFormLayout, QtGui.QGridLayout)):
# create a validation layout so multiple messages can be added and
# cleaned up.
self.layout().insertRow(0, self.validationLayout)
self.layout().insertRow(0, self.messageBar)
else:
# for use with Vertical/horizontal layout box
self.layout().insertWidget(0, self.messageBar)
# Set Class default variables -------------------------------------
self.vesp_dict = None
self.in_qgscrs = None
self.dfCSV = None
# this is a validation flag
self.OverwriteCtrlFile = False
self.cboMethod.addItems(
['High Density Kriging', 'Low Density Kriging (Advanced)'])
# To allow only integers for the min number of pts.
self.onlyInt = QIntValidator()
self.lneMinPoint.setValidator(self.onlyInt)
self.vesper_exe = check_vesper_dependency()
if self.vesper_exe is None or self.vesper_exe == '':
self.gbRunVesper.setTitle(
'WARNING:Vesper not found please configure using the about dialog.')
self.gbRunVesper.setChecked(False)
self.gbRunVesper.setCheckable(False)
self.gbRunVesper.setEnabled(False)
def init_gui(self):
#Set integer validator for the port number
int_validator = QIntValidator(1024, 49151)
self.txtPort.setValidator(int_validator)
#Load profiles
self.load_profiles()
#Set current profile in the combobox
curr_profile = current_profile()
if not curr_profile is None:
setComboCurrentIndexWithText(self.cbo_profiles, curr_profile.name)
#Load current database connection properties
self._load_db_conn_properties()
#Load existing PostgreSQL connections
self._load_qgis_pg_connections()
#Load directory paths
self._load_directory_paths()
self.edtEntityRecords.setMaximum(MAX_LIMIT)
self.edtEntityRecords.setValue(get_entity_browser_record_limit())
#Sorting order
self.populate_sort_order()
self.set_current_sort_order(get_entity_sort_order())
# Debug logging
lvl = debug_logging()
if lvl:
self.chk_logging.setCheckState(Qt.Checked)
else:
self.chk_logging.setCheckState(Qt.Unchecked)
def change_array_size(self):
"""Update the size of the multirun array based on the number of rows
and columns specified in the line edit."""
self.nrows = int(self.rows_edit.text()) if self.rows_edit.text() else 1
if self.nrows < 1:
self.nrows = 1
self.table.setRowCount(self.nrows)
self.ncols = int(self.cols_edit.text()) if self.cols_edit.text() else 1
if self.ncols < 1:
self.ncols = 1
self.table.setColumnCount(self.ncols)
self.col_index.setValidator(QIntValidator(1, self.ncols - 1))
if self.col_index.text() and int(
self.col_index.text()) > self.ncols - 1:
self.col_index.setText(str(self.ncols - 1))
self.reset_array()
self.col_range_text = self.col_range_text[:self.ncols] + [''] * (
self.ncols - len(self.col_range_text))
self.ui_param['runs included'] = [[] for i in range(self.nrows)]
for key, default in zip([
'Type', 'Analogue type', 'Time step name', 'Analogue channel',
'list index'
], ['Time step length', 'Fast analogue', [], [], '0']):
for i in range(len(self.ui_param[key]), self.ncols):
self.ui_param[key].append(default)
if len(self.ui_param[key]) > self.ncols:
self.ui_param[key] = self.ui_param[key][:self.ncols]
def __init__(self, parent=None):
super(ClassPropertiesDlg, self).__init__(parent)
idlabel = QLabel("&ID(Digits)")
self.idLineEditBox = QLineEdit(self)
self.idLineEditBox.setValidator(QIntValidator())
idlabel.setBuddy(self.idLineEditBox)
namelabel = QLabel("&Name")
self.nameLineEditBox = QLineEdit(self)
namelabel.setBuddy(self.nameLineEditBox)
descriptionlabel = QLabel("&Description")
self.descriptionLineEditBox = QTextEdit(self)
descriptionlabel.setBuddy(self.descriptionLineEditBox)
self.buttonBox = QDialogButtonBox(QDialogButtonBox.Ok
| QDialogButtonBox.Cancel)
layout = QGridLayout()
layout.addWidget(idlabel, 0, 0)
layout.addWidget(self.idLineEditBox, 0, 1)
layout.addWidget(namelabel, 1, 0)
layout.addWidget(self.nameLineEditBox, 1, 1, 1, 3)
layout.addWidget(descriptionlabel, 2, 0, 1, 4)
layout.addWidget(self.descriptionLineEditBox, 3, 0, 3, 4)
layout.addWidget(self.buttonBox)
self.setLayout(layout)
self.buttonBox.accepted.connect(self.accept)
self.buttonBox.rejected.connect(self.reject)
self.setWindowTitle("Class Properties")
def createMetronomeWidget(self):
self.metronomeLabel = QLabel()
self.metronomeNote = QComboBox()
self.metronomeNote.setModel(
listmodel.ListModel(
durations,
display=None,
icon=lambda item: symbols.icon('note_{0}'.format(
item.replace('.', 'd')))))
self.metronomeNote.setCurrentIndex(durations.index('4'))
self.metronomeNote.view().setIconSize(QSize(22, 22))
self.metronomeEqualSign = QLabel('=')
self.metronomeEqualSign.setFixedWidth(
self.metronomeEqualSign.minimumSizeHint().width())
self.metronomeValue = QComboBox(editable=True)
self.metronomeValue.setModel(
listmodel.ListModel(metronomeValues,
self.metronomeValue,
display=format))
self.metronomeValue.setCompleter(None)
self.metronomeValue.setValidator(
QIntValidator(0, 999, self.metronomeValue))
self.metronomeValue.setCurrentIndex(metronomeValues.index(100))
self.metronomeTempo = widgets.tempobutton.TempoButton()
self.metronomeTempo.tempo.connect(self.setMetronomeValue)
self.metronomeLabel.setBuddy(self.metronomeNote)
self.metronomeRound = QCheckBox()
def __init__(self, iface, parent=None):
super(AccuratePCISettingDlg, self).__init__()
self.iface = iface
self.parent = parent
self.setWindowTitle(u"PCI规划(高级)")
self.setWindowFlags(Qt.WindowStaysOnTopHint)
label = QLabel(u"请选择算法循环次数:")
self.Cycles = QLineEdit()
validator = QIntValidator(0, 999, self)
self.Cycles.setValidator(validator)
setting_grid = QGridLayout()
setting_grid.setSpacing(15)
setting_grid.addWidget(label, 0, 0)
setting_grid.addWidget(self.Cycles, 0, 1)
ok = QPushButton(u"确定")
self.connect(ok, SIGNAL("clicked()"), self.run)
cancel = QPushButton(u"取消")
self.connect(cancel, SIGNAL("clicked()"), self.accept)
btn_hbox = QHBoxLayout()
btn_hbox.setSpacing(10)
btn_hbox.addStretch(1)
btn_hbox.addWidget(ok)
btn_hbox.addWidget(cancel)
btn_hbox.addStretch(1)
vbox = QVBoxLayout()
vbox.addLayout(setting_grid)
vbox.addStretch(1)
vbox.addLayout(btn_hbox)
self.setLayout(vbox)
self.resize(180, 80)
def settings(self, parent):
# CRIANDO LABEL PARA SELECIONAR O TEMPO DE AMOSTRAGEM
self.lbTimeAmostragem = QLabel(parent)
mensagem = "Digite o tempo de amostragem em segundos (Deve ser no mínimo 2 segundos): "
self.lbTimeAmostragem.setText(mensagem)
self.lbTimeAmostragem.setAlignment(Qt.AlignCenter)
# CRIANDO O LINEEDIT PARA SELECIONAR O TEMPO DE AMOSTRAGEM
self.LETimeAmostragem = QLineEdit(parent)
sizePolicy = QSizePolicy(QSizePolicy.Minimum, QSizePolicy.Fixed)
sizePolicy.setHorizontalStretch(0)
sizePolicy.setVerticalStretch(0)
sizePolicy.setHeightForWidth(
self.LETimeAmostragem.sizePolicy().hasHeightForWidth())
self.LETimeAmostragem.setSizePolicy(sizePolicy)
self.LETimeAmostragem.setMaximumSize(QSize(40, 16777215))
self.LETimeAmostragem.setLayoutDirection(Qt.LeftToRight)
self.validator = QIntValidator(0, 999999, self)
self.LETimeAmostragem.setValidator(self.validator)
# CRIANDO UM SPACER PARA ORGANIZAR DENTRO DO LAYOUT OS ITENS
spacerItem = QSpacerItem(40, 20, QSizePolicy.Expanding,
QSizePolicy.Minimum)
# ADICIONANDO OS WIDGETS NO LAYOUT
self.addWidget(self.lbTimeAmostragem)
self.addWidget(self.LETimeAmostragem)
self.addItem(spacerItem)
def __init__(self):
QDialog.__init__(self)
self.ui = Ui_ComputerDialog()
self.ui.setupUi(self)
self.valid = QIntValidator(0, 1000000, self)
self.ui.speed.setValidator(self.valid)
self.ui.ram.setValidator(self.valid)
def __createLayout(self):
" Creates the dialog layout "
self.resize(400, 80)
self.setSizeGripEnabled(True)
vboxLayout = QVBoxLayout(self)
hboxLayout = QHBoxLayout()
hboxLayout.addWidget(QLabel("Status update interval, sec."))
self.__intervalEdit = QLineEdit()
self.__intervalEdit.setValidator(QIntValidator(1, 3600, self))
self.__intervalEdit.setAlignment(Qt.AlignRight | Qt.AlignVCenter)
hboxLayout.addWidget(self.__intervalEdit)
# Buttons at the bottom
self.__buttonBox = QDialogButtonBox(self)
self.__buttonBox.setOrientation(Qt.Horizontal)
self.__buttonBox.setStandardButtons(QDialogButtonBox.Ok
| QDialogButtonBox.Cancel)
self.__buttonBox.accepted.connect(self.userAccept)
self.__buttonBox.rejected.connect(self.close)
vboxLayout.addLayout(hboxLayout)
vboxLayout.addWidget(self.__buttonBox)
return
def __init__(self):
QDialog.__init__(self)
self.ui = Ui_LinkDialog()
self.ui.setupUi(self)
self.valid = QIntValidator(0, 1000000, self)
self.ui.capacity.setValidator(self.valid)
self.ui.length.setValidator(self.valid)
def init_gui(self):
#Set integer validator for the port number
int_validator = QIntValidator(1024, 49151)
self.txtPort.setValidator(int_validator)
#Load profiles
self.load_profiles()
#Set current profile in the combobox
curr_profile = current_profile()
if not curr_profile is None:
setComboCurrentIndexWithText(self.cbo_profiles, curr_profile.name)
#Load current database connection properties
self._load_db_conn_properties()
#Load existing PostgreSQL connections
self._load_qgis_pg_connections()
#Load directory paths
self._load_directory_paths()
# Debug logging
lvl = debug_logging()
if lvl:
self.chk_logging.setCheckState(Qt.Checked)
else:
self.chk_logging.setCheckState(Qt.Unchecked)
def __init__(self, table_group, parent, *args, **kwargs):
QDialog.__init__(self, parent, *args, **kwargs)
self.parent = table_group
group_id = self.parent.table_group.group.group_id
self.group = Group.select().where(Group.id == group_id).get()
vbox = QVBoxLayout()
vbox.addWidget(
FBoxTitle(u"<h3>Groupe: {}</h3>".format(self.group.name)))
self.order_number = LineEdit()
# form transfer
self.amount = LineEdit()
self.amount.setFont(QFont("Arial", 15))
self.amount.setValidator(QIntValidator())
self.amount.setToolTip(u"Taper le montant du transfert")
# self.solde = FLabel(get_solde())
self.amount_error = ErrorLabel(u"")
send_butt = Button(u"Envoyer")
send_butt.clicked.connect(self.sender)
cancel_but = Button(u"Annuler")
cancel_but.clicked.connect(self.cancel)
formbox = QGridLayout()
formbox.addWidget(FLabel(u"Montant: "), 0, 0)
formbox.addWidget(self.amount, 0, 1)
formbox.addWidget(send_butt, 2, 1)
formbox.addWidget(cancel_but, 2, 0)
vbox.addLayout(formbox)
self.setLayout(vbox)
def __init__(self, parent=None):
super(login, self).__init__(parent)
self.setupUi(self)
db = QSqlDatabase.addDatabase('QMYSQL')
db.setHostName("localhost")
db.setDatabaseName("TiendaVrt")
db.setUserName("root")
db.setPassword("")
if not db.open():
print("Could not open testdb database")
print(db.lastError().driverText())
print(db.lastError().databaseText())
else:
print("Database is OK")
self.txt_id.setValidator(QIntValidator())
self.r = Registro.Reg() #llama la clase que sera en el documento .py
self.p = Productos.products()
self.btn_registro.clicked.connect(
self.r.show) #muesta la clase en un boton
self.btn_Ingresar.clicked.connect(self.login)
db.close()
def setData(self, m):
self.method = m
self.visualizer.Visualize(self.method)
self.ui.stepforth.setEnabled(True)
self.ui.lineEdit.setEnabled(True)
self.ui.labelTotal.setText(str(self.method.trace.length()))
self.ui.lineEdit.setText(str(self.method.trace.current + 1))
self.validator = QIntValidator(1, self.method.trace.length(), self)
self.ui.lineEdit.setValidator(self.validator)
op = self.method.trace.getCurrent()
self.showTotals(op[1])
if self.method.trace.current == 0:
self.ui.stepback.setEnabled(False)
self.ui.rewind.setEnabled(False)
else:
self.ui.stepback.setEnabled(True)
self.ui.rewind.setEnabled(True)
if self.method.trace.current == self.method.trace.length() - 1:
self.ui.stepforth.setEnabled(False)
self.ui.replay.setEnabled(False)
else:
self.ui.stepforth.setEnabled(True)
self.ui.replay.setEnabled(True)
def __init__(self):
QDialog.__init__(self)
self.ui = Ui_ComputerDialog()
self.ui.setupUi(self)
self.valid = QIntValidator(0, 1000000, self)
self.ui.speed.setValidator(self.valid)
self.ui.ram.setValidator(self.valid)
self.setWindowTitle(self.tr("Edit VM")) #we use the same dialog for resources and demands
def __init__(self):
QDialog.__init__(self)
self.ui = Ui_VertexDialog()
self.ui.setupUi(self)
self.valid = QIntValidator(0, 1000000, self)
self.ui.time.setValidator(self.valid)
self.ui.versions.verticalHeader().hide()
self.ui.versions.horizontalHeader().setStretchLastSection(True)
def __init__(self):
super().__init__()
gui.lineEdit(self.controlArea, self, "number", "Enter a number",
box="Number",
callback=self.number_changed,
valueType=int, validator=QIntValidator())
self.number_changed()
def __init__(self):
QDialog.__init__(self)
self.ui = Ui_OptionsDialog()
self.ui.setupUi(self)
self.valid = QIntValidator(0, 10000, self)
self.ui.esDelayEdit.setValidator(self.valid)
self.ui.switchDelayEdit.setValidator(self.valid)
self.ui.ifgEdit.setValidator(self.valid)
def setup(self):
self.ui.reportBtn.setEnabled(False)
self.ui.downloadBtn.setEnabled(False)
self.ui.stopSelectionBtn.setEnabled(False)
self.ui.courseNo.setValidator(QIntValidator(99999999, 1000000000))
self.ui.courseNo.setFocus()
self.ui.courseNo.paste()
# self.autoSearch()
self.ui.folderLE.setText(os.getcwd())
def setContent(self):
self.content = QLineEdit(self)
self.validator = QIntValidator(0, 2147483647, self)
self.content.setValidator(self.validator)
self.hlayout.addWidget(self.content)
self.connect(self.content, SIGNAL("textChanged(const QString &)"),
self.updateQuery)
self.connect(self.content, SIGNAL("textEdited(const QString &)"),
self.updateQuery)
def __set_validators(self):
'''
set validators for edit fields
'''
validator_positive_integer = QIntValidator()
validator_positive_integer.setBottom(0)
validator_positive_double = MyDoubleValidator(True, self)
validator_zero_one = MyZeroOneValidator(self)
self.edit_specific_data_0.setValidator(validator_positive_double)
self.edit_specific_data_1.setValidator(validator_positive_double)
self.edit_specific_data_2.setValidator(validator_positive_double)
self.edit_geometry_coeficient.setValidator(validator_positive_double)
self.edit_geometry_type.setValidator(validator_positive_integer)
self.edit_storativity.setValidator(validator_zero_one)
self.editl_dual_porosity.setValidator(validator_zero_one)
self.edit_type.setValidator(validator_positive_integer)
def __init__(self, parent=None):
"""Constructor."""
super(NetworkAPIDialog, self).__init__(parent)
self.setupUi(self)
# After setupUI you can access any designer object by doing
# self.<objectname>
self.port.setValidator(QIntValidator(0, 65536))
self.buttons.clicked.connect(self.handleButtonClick)
self.loadSettings()
def ud_times(self):
""" Dialog ud_times.ui """
dlg_udtimes = UDtimes()
self.load_settings(dlg_udtimes)
dlg_udtimes.dry_days.setValidator(QIntValidator())
dlg_udtimes.btn_accept.clicked.connect(partial(self.update_table, 'inp_options', dlg_udtimes))
dlg_udtimes.btn_cancel.clicked.connect(dlg_udtimes.close)
self.go2epa_options_get_data('inp_options', dlg_udtimes)
dlg_udtimes.setWindowFlags(Qt.WindowStaysOnTopHint)
dlg_udtimes.exec_()
def createEditor(self, parent, option, index):
if index.column() == DATAINS:
editor = QDateEdit(parent)
editor.setCalendarPopup(True)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
return editor
elif index.column() == QT:
editor = QLineEdit(parent)
validator = QIntValidator(self)
editor.setValidator(validator)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
return editor
elif index.column() == IMP:
editor = QLineEdit(parent)
validator = QDoubleValidator(self)
validator.setDecimals(3)
editor.setValidator(validator)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
return editor
else:
return QSqlRelationalDelegate.createEditor(self, parent, option,
index)
def createEditor(self, parent, option, index):
if index.column() == SQT:
editor = MyQLineEdit(parent)
validator = QIntValidator(self)
editor.setValidator(validator)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
self.connect(editor, SIGNAL("keyDownPressEvent()"),
self.gestEvt)
return editor
elif index.column() == SIMP:
editor = MyQLineEdit(parent)
validator = QDoubleValidator(self)
validator.setDecimals(3)
editor.setValidator(validator)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
self.connect(editor, SIGNAL("keyDownPressEvent()"),
self.gestEvt)
return editor
elif index.column() == SIVA:
editor = MyQLineEdit(parent)
validator = QDoubleValidator(self)
validator.setDecimals(3)
editor.setValidator(validator)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
self.connect(editor, SIGNAL("keyDownPressEvent()"),
self.gestEvt)
return editor
elif index.column() == SDESC:
editor = MyQLineEdit(parent)
editor.setAlignment(Qt.AlignRight|Qt.AlignVCenter)
self.connect(editor, SIGNAL("keyDownPressEvent()"),
self.gestEvt)
return editor
editor = QSqlRelationalDelegate.createEditor(self, parent,
option, index)
return editor
def portValidator(parent):
validator = QIntValidator(0, 65535, parent)
validator.setObjectName('portValidator')
return validator
def __init__(self, status, actions):
super (I2CControlView, self).__init__()
self.status = status
self.actions = actions
f = open(I2C_DESC_LOC, 'r')
s = f.read()
f.close()
s = s.split("DESCRIPTION START")[1]
s = s.split("DESCRIPTION END")[0]
#print "s: %s" % s
i2c_desc = QLabel(s)
i2c_desc.setMaximumWidth(500)
i2c_desc.setWordWrap(True)
i2c_desc.setAlignment(QtCore.Qt.AlignTop)
run_button = QPushButton("Run")
run_button.setToolTip("Execute the I2C Transaction")
run_button.clicked.connect(self.actions.i2c_run)
reload_button = QPushButton("Reload")
reload_button.setToolTip("Reload I2C Transactions")
reload_button.clicked.connect(self.actions.i2c_run)
pause_button = QPushButton("Pause")
pause_button.setToolTip("Pause I2C Execution flow")
pause_button.clicked.connect(self.actions.i2c_pause)
stop_button = QPushButton("Stop")
stop_button.setToolTip("Stop I2C Execution")
stop_button.clicked.connect(self.actions.i2c_stop)
reset_button = QPushButton("Reset")
reset_button.setToolTip("Reset the current execution")
reset_button.clicked.connect(self.actions.i2c_reset)
step_button = QPushButton("Step")
step_button.setToolTip("Execute one I2C Transaction")
step_button.clicked.connect(self.actions.i2c_step)
loop_step_button = QPushButton("Loop Step")
loop_step_button.setToolTip("Iterate through the I2C Loop one time")
loop_step_button.clicked.connect(self.actions.i2c_loop_step)
update_delay_button = QPushButton("Update Delay (ms)")
update_delay_button.setToolTip("Update the delay in ms between I2C Transactions")
update_delay_button.clicked.connect(self.update_delay)
self.delay_le = QLineEdit("100")
self.delay_le.setAlignment(QtCore.Qt.AlignRight)
v = QIntValidator()
v.setBottom(1)
self.execute_status = QLabel("Idle")
self.default_slave_addr = QLineEdit()
self.default_slave_addr.setAlignment(QtCore.Qt.AlignRight)
self.default_slave_addr.setText("0x10")
self.default_slave_addr.textChanged.connect(self.custom_validator)
self.default_slave_addr.returnPressed.connect(self.update_all_slave_addresses)
self.update_all_slave_addr = QPushButton("Update All Slave Addr")
self.update_all_slave_addr.clicked.connect(self.update_all_slave_addresses)
layout = QGridLayout()
layout.addWidget(i2c_desc, 0, 0, 1, 2)
#Add Default I2C Address
default_addr_layout = QGridLayout()
default_addr_layout.addWidget(QLabel("Default Slave Addr"), 0, 0, 1, 1)
default_addr_layout.addWidget(self.default_slave_addr, 0, 1, 1, 1)
default_addr_layout.addWidget(self.update_all_slave_addr, 1, 0, 1, 2)
#Add Buttons/Status Layout
layout.addLayout(default_addr_layout, 2, 0, 1, 2)
buttons_layout = QGridLayout()
buttons_layout.addWidget(run_button, 0, 0, 1, 2)
buttons_layout.addWidget(reload_button, 1, 0, 1, 2)
buttons_layout.addWidget(step_button, 2, 0, 1, 2)
buttons_layout.addWidget(loop_step_button, 3, 0, 1, 2)
buttons_layout.addWidget(pause_button, 4, 0, 1, 2)
buttons_layout.addWidget(stop_button, 5, 0, 1, 2)
buttons_layout.addWidget(reset_button, 6, 0, 1, 2)
buttons_layout.addWidget(update_delay_button, 7, 0, 1, 1)
buttons_layout.addWidget(self.delay_le, 7, 1, 1, 1)
buttons_layout.addWidget(QLabel("Status:"), 8, 0, 1, 1)
buttons_layout.addWidget(self.execute_status, 8, 1, 1, 1)
layout.addLayout(buttons_layout, 3, 0, 1, 2)
self.actions.i2c_execute_status_update.connect(self.status_update)
self.setLayout(layout)
def __init__(self, parent=None, aptinkerQSettings=None):
"""Constructor"""
QDialog.__init__(self, parent=parent)
self.setupUi(self)
self.setWindowFlags(Qt.Window) # To add Maximize & Minimize buttons
self.setWindowTitle('Select Snapshot from Database')
# Load Startup Preferences for Snapshot Table
self.default_ss_pref = dict(
vis_col_key_list=config.DEF_VIS_COL_KEYS['snapshot_DB'][:])
if osp.exists(PREF_SS_JSON_FILEPATH):
with open(PREF_SS_JSON_FILEPATH, 'r') as f:
self.ss_pref = json.load(f)
else:
self.ss_pref = self.default_ss_pref
# Load Startup Preferences for Snapshot Meta Table
self.default_ss_meta_pref = dict(
vis_col_key_list=['ss_id', 'config_id', 'ss_ctime', 'ss_name',
'ss_username'])
if osp.exists(PREF_SS_META_JSON_FILEPATH):
with open(PREF_SS_META_JSON_FILEPATH, 'r') as f:
self.ss_meta_pref = json.load(f)
else:
self.ss_meta_pref = self.default_ss_meta_pref
self.ssDBViewWidget = SnapshotDBViewWidget(self.groupBox_selected_ss,
DB_selector=True)
self.tableView_ss = self.ssDBViewWidget.tableView
self.ssMetaDBViewWidget = SnapshotMetaDBViewWidget(
self.groupBox_search_result)
self.tableView_ss_meta = self.ssMetaDBViewWidget.tableView
self.textEdit_description = \
self.ssMetaDBViewWidget.textEdit_description
self.settings = QSettings('APHLA', 'TinkerSSDBSelector')
self.loadViewSettings()
self._aptinkerQSettings = aptinkerQSettings
self.pushButton_search.setIcon(QIcon(':/search.png'))
all_ctime_operators = [
self.comboBox_time_created_1.itemText(i)
for i in range(self.comboBox_time_created_1.count())]
self.comboBox_time_created_1.setCurrentIndex(
all_ctime_operators.index(''))
self.dateTimeEdit_time_created_1.setDateTime(
QDateTime.currentDateTime())
self.dateTimeEdit_time_created_2.setDateTime(
QDateTime.currentDateTime())
self.search_params = dict(
ss_id_1='', ss_id_2='', config_id_1='', config_id_2='',
ss_ref_step_size_1='', ss_ref_step_size_2='',
ss_name='', ss_desc='', ss_username='', ss_ctime_1='', ss_ctime_2='',
ss_synced_gruop_weight='', ss_masar_id_1='', ss_masar_id_2='')
db_id_validator = QIntValidator()
db_id_validator.setBottom(1)
self.lineEdit_ss_id_1.setValidator(db_id_validator)
self.lineEdit_ss_id_2.setValidator(db_id_validator)
self.lineEdit_config_id_1.setValidator(db_id_validator)
self.lineEdit_config_id_2.setValidator(db_id_validator)
self.lineEdit_masar_id_1.setValidator(db_id_validator)
self.lineEdit_masar_id_2.setValidator(db_id_validator)
self.prev_valid_ref_step_sizes = dict(
lineEdit_ref_step_size_1=np.nan, lineEdit_ref_step_size_2=np.nan)
# Set up Snapshot Table
self.ss_model = SnapshotModel(self.ss_pref['vis_col_key_list'])
self.tableModel_ss = self.ss_model.table
proxyModel = QSortFilterProxyModel()
proxyModel.setSourceModel(self.tableModel_ss)
proxyModel.setDynamicSortFilter(False)
tbV = self.tableView_ss
tbV.setModel(proxyModel)
tbV.setItemDelegate(SnapshotDBTableViewItemDelegate(
tbV, self.tableModel_ss, tbV.parent()))
#self.db = TinkerMainDatabase()
self.db = self.ss_model.db
if '[ss_meta_table text view]' not in self.db.getViewNames(
square_brackets=True):
self.db.create_temp_ss_meta_table_text_view()
# Set up Snapshot Meta Table
self.ss_meta_all_col_keys = self.ssMetaDBViewWidget.all_col_keys
self.search_result = {k: [] for k in self.ss_meta_all_col_keys}
self.tableModel_ss_meta = MetaTableModel(
self.search_result, self.ssMetaDBViewWidget)
proxyModel = QSortFilterProxyModel()
proxyModel.setSourceModel(self.tableModel_ss_meta)
proxyModel.setDynamicSortFilter(False)
tbV = self.tableView_ss_meta
tbV.setModel(proxyModel)
self.selectionModel = QItemSelectionModel(proxyModel)
tbV.setSelectionModel(self.selectionModel)
# Apply Visible Column Preference to Snapshot Meta Table
ss_meta_vis_col_name_list = [
self.ssMetaDBViewWidget.col_names_wo_desc[
self.ssMetaDBViewWidget.col_keys_wo_desc.index(k)]
for k in self.ss_meta_pref['vis_col_key_list']]
self.ssMetaDBViewWidget.on_column_selection_change(
ss_meta_vis_col_name_list, force_visibility_update=True)
# Make connection
self.connect(self.lineEdit_ref_step_size_1, SIGNAL('editingFinished()'),
self.validate_ref_step_size)
self.connect(self.lineEdit_ref_step_size_2, SIGNAL('editingFinished()'),
self.validate_ref_step_size)
self.connect(self.pushButton_search, SIGNAL('clicked()'),
self.update_search)
self.connect(
self.selectionModel,
SIGNAL(
'currentRowChanged(const QModelIndex &, const QModelIndex &)'),
self.on_selection_change
)