class SourceSelectorDialog(QDialog):
def __init__(self, parent, flags=Qt.WindowFlags()):
QDialog.__init__(self, parent, flags)
self.setModal(False)
self.setWindowTitle("Select sources by...")
lo = QVBoxLayout(self)
lo.setContentsMargins(10, 10, 10, 10)
lo.setSpacing(5)
# select by
lo1 = QHBoxLayout()
lo.addLayout(lo1)
lo1.setContentsMargins(0, 0, 0, 0)
# lab = QLabel("Select:")
# lo1.addWidget(lab)
self.wselby = QComboBox(self)
lo1.addWidget(self.wselby, 0)
self.wselby.activated[str].connect(self._setup_selection_by)
# under/over
self.wgele = QComboBox(self)
lo1.addWidget(self.wgele, 0)
self.wgele.addItems([">", ">=", "<=", "<", "sum<=", "sum>", "=="])
self.wgele.activated[str].connect(self._select_threshold)
# threshold value
self.wthreshold = QLineEdit(self)
self.wthreshold.editingFinished.connect(self._select_threshold)
lo1.addWidget(self.wthreshold, 1)
# min and max label
self.wminmax = QLabel(self)
lo.addWidget(self.wminmax)
# selection slider
lo1 = QHBoxLayout()
lo.addLayout(lo1)
self.wpercent = QSlider(self)
self.wpercent.setTracking(False)
self.wpercent.valueChanged[int].connect(self._select_percentile)
self.wpercent.sliderMoved[int].connect(
self._select_percentile_threshold)
self.wpercent.setRange(0, 100)
self.wpercent.setOrientation(Qt.Horizontal)
lo1.addWidget(self.wpercent)
self.wpercent_lbl = QLabel("0%", self)
self.wpercent_lbl.setMinimumWidth(64)
lo1.addWidget(self.wpercent_lbl)
# # hide button
# lo.addSpacing(10)
# lo2 = QHBoxLayout()
# lo.addLayout(lo2)
# lo2.setContentsMargins(0,0,0,0)
# hidebtn = QPushButton("Close",self)
# hidebtn.setMinimumWidth(128)
# QObject.connect(hidebtn,pyqtSignal("clicked()"),self.hide)
# lo2.addStretch(1)
# lo2.addWidget(hidebtn)
# lo2.addStretch(1)
# self.setMinimumWidth(384)
self._in_select_threshold = False
self._sort_index = None
self.qerrmsg = QErrorMessage(self)
def resetModel(self):
"""Resets dialog based on current model."""
if not self.model:
return
# getset of model tags, and remove the non-sorting tags
alltags = set(self.model.tagnames)
alltags -= NonSortingTags
# make list of tags from StandardTags that are present in model
self.sorttags = [
tag for tag in StandardTags
if tag in alltags or tag in TagAccessors
]
# append model tags that were not in StandardTags
self.sorttags += list(alltags - set(self.sorttags))
# set selector
self.wselby.clear()
self.wselby.addItems(self.sorttags)
for tag in "Iapp", "I":
if tag in self.sorttags:
self.wselby.setCurrentIndex(self.sorttags.index(tag))
break
self._setup_selection_by(self.wselby.currentText())
def _reset_percentile(self):
self.wthreshold.setText("")
self.wpercent.setValue(50)
self.wpercent_lbl.setText("--%")
def _setup_selection_by(self, tag):
tag = str(tag) # may be QString
# clear threshold value and percentiles
self._reset_percentile()
# get min/max values, and sort indices
# _sort_index will be an array of (value,src,cumsum) tuples, sorted by tag value (high to low),
# where src is the source, and cumsum is the sum of all values in the list from 0 up to and including the current one
self._sort_index = []
minval = maxval = value = None
for isrc, src in enumerate(self.model.sources):
try:
if hasattr(src, tag):
# test if item can be cast to float
try:
float(getattr(src, tag))
except:
continue
else:
value = float(getattr(src, tag))
elif tag in TagAccessors:
value = float(TagAccessors[tag](src))
else: # not existant for this source (maybe a tag or something??)
value = np.nan
# skip source if failed to access this tag as a float
except:
traceback.print_exc()
continue
if value is not None:
self._sort_index.append(
[value if not np.isnan(value) else -np.inf, src, 0.])
minval = min(minval, value if not np.isnan(value) else
np.inf) if minval is not None else value
maxval = max(maxval, value if not np.isnan(value) else
-np.inf) if maxval is not None else value
# add label
if minval is None:
self._range = None
self.wminmax.setText(
"<font color=red>'%s' is not a numeric attribute</font>" % tag)
for w in self.wgele, self.wthreshold, self.wpercent, self.wpercent_lbl:
w.setEnabled(False)
else:
self._range = (minval, maxval)
self.wminmax.setText("min: %g max: %g" % self._range)
for w in self.wgele, self.wthreshold, self.wpercent, self.wpercent_lbl:
w.setEnabled(True)
# sort index by descending values
self._sort_index.sort(reverse=True, key=operator.itemgetter(0))
# generate cumulative sums
cumsum = 0.
for entry in self._sort_index:
if not np.isneginf(entry[0]):
cumsum += entry[0]
entry[2] = cumsum
# Maps comparison operators to callables. Used in _select_threshold.
# Each callable takes two arguments: e is a tuple of (value,src,cumsum) (see _sort_index above), and x is a threshold
# Second argument is a flag: if False, selection is inverted w.r.t. operator
Operators = {
"<": ((lambda e, x: e[0] >= x), False),
"<=": ((lambda e, x: e[0] > x), False),
">": ((lambda e, x: e[0] > x), True),
">=": ((lambda e, x: e[0] >= x), True),
"sum<=": ((lambda e, x: e[2] <= x), True),
"sum>": ((lambda e, x: e[2] <= x), False),
"==": ((lambda e, x: np.abs(e[0] - x) < 1.0e-8), True),
}
def _select_threshold(self, *dum):
dprint(1, "select_threshold", dum)
self._in_select_threshold = True
busy = BusyIndicator()
try:
# get threshold, ignore if not set
threshold = str(self.wthreshold.text())
if not threshold:
self._reset_percentile()
return
# try to parse threshold, ignore if invalid
try:
threshold = float(threshold)
except:
self._reset_percentile()
return
# get comparison operator
op, select = self.Operators[str(self.wgele.currentText())]
# apply to initial segment (that matches operator)
for num, entry in enumerate(self._sort_index):
if not op(entry, threshold):
break
entry[1].selected = select
else:
num = len(self._sort_index)
# apply to remaining segment
for val, src, cumsum in self._sort_index[num:]:
src.selected = not select
# set percentile
percent = round(float(num * 100) / len(self._sort_index))
if not select:
percent = 100 - percent
self.wpercent.setValue(percent)
self.wpercent_lbl.setText("%3d%%" % percent)
# emit signal
self.model.emitSelection(self)
finally:
self._in_select_threshold = False
busy.reset_cursor()
def _select_percentile(self, percent):
self._select_percentile_threshold(percent, do_select=True)
def _select_percentile_threshold(self, percent, do_select=False):
# ignore if no sort index set up, or if _select_threshold() is being called
if self._sort_index is None or self._in_select_threshold:
return
dprint(1, "select_precentile_threshold", percent)
busy = BusyIndicator()
# number of objects to select
nsrc = len(self._sort_index)
nsel = int(math.ceil(nsrc * float(percent) / 100))
# get comparison operator
opstr = str(self.wgele.currentText())
op, select = self.Operators[opstr]
# select head or tail of list, depending on direction of operator
if select:
thr = self._sort_index[min(nsel, nsrc - 1)]
slc1 = slice(0, nsel)
slc2 = slice(nsel, None)
else:
thr = self._sort_index[-min(nsel + 1, nsrc)]
slc1 = slice(nsrc - nsel, None)
slc2 = slice(0, nsrc - nsel)
if do_select:
for val, src, cumsum in self._sort_index[slc1]:
src.selected = True
for val, src, cumsum in self._sort_index[slc2]:
src.selected = False
self.model.emitSelection(self)
self.wpercent_lbl.setText("%3d%%" % percent)
self.wthreshold.setText(
"%g" % (thr[2] if opstr.startswith("sum") else thr[0]))
busy.reset_cursor()
return nsel
def setModel(self, model):
"""Sets the current model. If dialog is visible, applies the changes"""
self.model = model
if self.isVisible():
self.resetModel()
if not model:
self.hide()
def show(self):
"""Shows dialog, resetting the model if it was invisible."""
if not self.isVisible():
self.resetModel()
QDialog.show(self)
def __init__(self, window, plugin, keystore, device_id):
title = _("{} Settings").format(plugin.device)
super(SettingsDialog, self).__init__(window, title)
self.setMaximumWidth(540)
devmgr = plugin.device_manager()
config = devmgr.config
handler = keystore.handler
thread = keystore.thread
hs_rows, hs_cols = (64, 128)
def invoke_client(method, *args, **kw_args):
unpair_after = kw_args.pop('unpair_after', False)
def task():
client = devmgr.client_by_id(device_id)
if not client:
raise RuntimeError("Device not connected")
if method:
getattr(client, method)(*args, **kw_args)
if unpair_after:
devmgr.unpair_id(device_id)
return client.features
thread.add(task, on_success=update)
def update(features):
self.features = features
set_label_enabled()
if features.bootloader_hash:
bl_hash = bh2u(features.bootloader_hash)
bl_hash = "\n".join([bl_hash[:32], bl_hash[32:]])
else:
bl_hash = "N/A"
noyes = [_("No"), _("Yes")]
endis = [_("Enable Passphrases"), _("Disable Passphrases")]
disen = [_("Disabled"), _("Enabled")]
setchange = [_("Set a PIN"), _("Change PIN")]
version = "%d.%d.%d" % (features.major_version,
features.minor_version,
features.patch_version)
device_label.setText(features.label)
pin_set_label.setText(noyes[features.pin_protection])
passphrases_label.setText(disen[features.passphrase_protection])
bl_hash_label.setText(bl_hash)
label_edit.setText(features.label)
device_id_label.setText(features.device_id)
initialized_label.setText(noyes[features.initialized])
version_label.setText(version)
clear_pin_button.setVisible(features.pin_protection)
clear_pin_warning.setVisible(features.pin_protection)
pin_button.setText(setchange[features.pin_protection])
pin_msg.setVisible(not features.pin_protection)
passphrase_button.setText(endis[features.passphrase_protection])
language_label.setText(features.language)
def set_label_enabled():
label_apply.setEnabled(label_edit.text() != self.features.label)
def rename():
invoke_client('change_label', label_edit.text())
def toggle_passphrase():
title = _("Confirm Toggle Passphrase Protection")
currently_enabled = self.features.passphrase_protection
if currently_enabled:
msg = _("After disabling passphrases, you can only pair this "
"Electrum wallet if it had an empty passphrase. "
"If its passphrase was not empty, you will need to "
"create a new wallet with the install wizard. You "
"can use this wallet again at any time by re-enabling "
"passphrases and entering its passphrase.")
else:
msg = _("Your current Electrum wallet can only be used with "
"an empty passphrase. You must create a separate "
"wallet with the install wizard for other passphrases "
"as each one generates a new set of addresses.")
msg += "\n\n" + _("Are you sure you want to proceed?")
if not self.question(msg, title=title):
return
invoke_client('toggle_passphrase', unpair_after=currently_enabled)
def change_homescreen():
dialog = QFileDialog(self, _("Choose Homescreen"))
filename, __ = dialog.getOpenFileName()
if not filename:
return # user cancelled
if filename.endswith('.toif'):
img = open(filename, 'rb').read()
if img[:8] != b'TOIf\x90\x00\x90\x00':
handler.show_error('File is not a TOIF file with size of \
144x144')
return
else:
from PIL import Image # FIXME
im = Image.open(filename)
if im.size != (128, 64):
handler.show_error('Image must be 128 x 64 pixels')
return
im = im.convert('1')
pix = im.load()
img = bytearray(1024)
for j in range(64):
for i in range(128):
if pix[i, j]:
o = (i + j * 128)
img[o // 8] |= (1 << (7 - o % 8))
img = bytes(img)
invoke_client('change_homescreen', img)
def clear_homescreen():
invoke_client('change_homescreen', b'\x00')
def set_pin():
invoke_client('set_pin', remove=False)
def clear_pin():
invoke_client('set_pin', remove=True)
def wipe_device():
wallet = window.wallet
if wallet and sum(wallet.get_balance()):
title = _("Confirm Device Wipe")
msg = _("Are you SURE you want to wipe the device?\n"
"Your wallet still has bitcoins in it!")
if not self.question(
msg, title=title, icon=QMessageBox.Critical):
return
invoke_client('wipe_device', unpair_after=True)
def slider_moved():
mins = timeout_slider.sliderPosition()
timeout_minutes.setText(_("%2d minutes") % mins)
def slider_released():
config.set_session_timeout(timeout_slider.sliderPosition() * 60)
# Information tab
info_tab = QWidget()
info_layout = QVBoxLayout(info_tab)
info_glayout = QGridLayout()
info_glayout.setColumnStretch(2, 1)
device_label = QLabel()
pin_set_label = QLabel()
passphrases_label = QLabel()
version_label = QLabel()
device_id_label = QLabel()
bl_hash_label = QLabel()
bl_hash_label.setWordWrap(True)
language_label = QLabel()
initialized_label = QLabel()
rows = [
(_("Device Label"), device_label),
(_("PIN set"), pin_set_label),
(_("Passphrases"), passphrases_label),
(_("Firmware Version"), version_label),
(_("Device ID"), device_id_label),
(_("Bootloader Hash"), bl_hash_label),
(_("Language"), language_label),
(_("Initialized"), initialized_label),
]
for row_num, (label, widget) in enumerate(rows):
info_glayout.addWidget(QLabel(label), row_num, 0)
info_glayout.addWidget(widget, row_num, 1)
info_layout.addLayout(info_glayout)
# Settings tab
settings_tab = QWidget()
settings_layout = QVBoxLayout(settings_tab)
settings_glayout = QGridLayout()
# Settings tab - Label
label_msg = QLabel(
_("Name this {}. If you have multiple devices "
"their labels help distinguish them.").format(plugin.device))
label_msg.setWordWrap(True)
label_label = QLabel(_("Device Label"))
label_edit = QLineEdit()
label_edit.setMinimumWidth(150)
label_edit.setMaxLength(plugin.MAX_LABEL_LEN)
label_apply = QPushButton(_("Apply"))
label_apply.clicked.connect(rename)
label_edit.textChanged.connect(set_label_enabled)
settings_glayout.addWidget(label_label, 0, 0)
settings_glayout.addWidget(label_edit, 0, 1, 1, 2)
settings_glayout.addWidget(label_apply, 0, 3)
settings_glayout.addWidget(label_msg, 1, 1, 1, -1)
pin_button = QPushButton()
# Settings tab - PIN
pin_label = QLabel(_("PIN Protection"))
pin_button.clicked.connect(set_pin)
settings_glayout.addWidget(pin_label, 2, 0)
settings_glayout.addWidget(pin_button, 2, 1)
pin_msg = QLabel(
_("PIN protection is strongly recommended. "
"A PIN is your only protection against someone "
"stealing your bitcoins if they obtain physical "
"access to your {}.").format(plugin.device))
pin_msg.setWordWrap(True)
pin_msg.setStyleSheet("color: red")
settings_glayout.addWidget(pin_msg, 3, 1, 1, -1)
# Settings tab - Homescreen
homescreen_label = QLabel(_("Homescreen"))
homescreen_change_button = QPushButton(_("Change..."))
homescreen_clear_button = QPushButton(_("Reset"))
homescreen_change_button.clicked.connect(change_homescreen)
try:
import PIL
except ImportError:
homescreen_change_button.setDisabled(True)
homescreen_change_button.setToolTip(
_("Required package 'PIL' is not available - Please install \
it or use the OctoWallet website instead."))
homescreen_clear_button.clicked.connect(clear_homescreen)
homescreen_msg = QLabel(
_("You can set the homescreen on your "
"device to personalize it. You must "
"choose a {} x {} monochrome black and "
"white image.").format(hs_rows, hs_cols))
homescreen_msg.setWordWrap(True)
settings_glayout.addWidget(homescreen_label, 4, 0)
settings_glayout.addWidget(homescreen_change_button, 4, 1)
settings_glayout.addWidget(homescreen_clear_button, 4, 2)
settings_glayout.addWidget(homescreen_msg, 5, 1, 1, -1)
# Settings tab - Session Timeout
timeout_label = QLabel(_("Session Timeout"))
timeout_minutes = QLabel()
timeout_slider = QSlider(Qt.Horizontal)
timeout_slider.setRange(1, 60)
timeout_slider.setSingleStep(1)
timeout_slider.setTickInterval(5)
timeout_slider.setTickPosition(QSlider.TicksBelow)
timeout_slider.setTracking(True)
timeout_msg = QLabel(
_("Clear the session after the specified period "
"of inactivity. Once a session has timed out, "
"your PIN and passphrase (if enabled) must be "
"re-entered to use the device."))
timeout_msg.setWordWrap(True)
timeout_slider.setSliderPosition(config.get_session_timeout() // 60)
slider_moved()
timeout_slider.valueChanged.connect(slider_moved)
timeout_slider.sliderReleased.connect(slider_released)
settings_glayout.addWidget(timeout_label, 6, 0)
settings_glayout.addWidget(timeout_slider, 6, 1, 1, 3)
settings_glayout.addWidget(timeout_minutes, 6, 4)
settings_glayout.addWidget(timeout_msg, 7, 1, 1, -1)
settings_layout.addLayout(settings_glayout)
settings_layout.addStretch(1)
# Advanced tab
advanced_tab = QWidget()
advanced_layout = QVBoxLayout(advanced_tab)
advanced_glayout = QGridLayout()
# Advanced tab - clear PIN
clear_pin_button = QPushButton(_("Disable PIN"))
clear_pin_button.clicked.connect(clear_pin)
clear_pin_warning = QLabel(
_("If you disable your PIN, anyone with physical access to your "
"{} device can spend your bitcoins.").format(plugin.device))
clear_pin_warning.setWordWrap(True)
clear_pin_warning.setStyleSheet("color: red")
advanced_glayout.addWidget(clear_pin_button, 0, 2)
advanced_glayout.addWidget(clear_pin_warning, 1, 0, 1, 5)
# Advanced tab - toggle passphrase protection
passphrase_button = QPushButton()
passphrase_button.clicked.connect(toggle_passphrase)
passphrase_msg = WWLabel(PASSPHRASE_HELP)
passphrase_warning = WWLabel(PASSPHRASE_NOT_PIN)
passphrase_warning.setStyleSheet("color: red")
advanced_glayout.addWidget(passphrase_button, 3, 2)
advanced_glayout.addWidget(passphrase_msg, 4, 0, 1, 5)
advanced_glayout.addWidget(passphrase_warning, 5, 0, 1, 5)
# Advanced tab - wipe device
wipe_device_button = QPushButton(_("Wipe Device"))
wipe_device_button.clicked.connect(wipe_device)
wipe_device_msg = QLabel(
_("Wipe the device, removing all data from it. The firmware "
"is left unchanged."))
wipe_device_msg.setWordWrap(True)
wipe_device_warning = QLabel(
_("Only wipe a device if you have the recovery seed written down "
"and the device wallet(s) are empty, otherwise the bitcoins "
"will be lost forever."))
wipe_device_warning.setWordWrap(True)
wipe_device_warning.setStyleSheet("color: red")
advanced_glayout.addWidget(wipe_device_button, 6, 2)
advanced_glayout.addWidget(wipe_device_msg, 7, 0, 1, 5)
advanced_glayout.addWidget(wipe_device_warning, 8, 0, 1, 5)
advanced_layout.addLayout(advanced_glayout)
advanced_layout.addStretch(1)
tabs = QTabWidget(self)
tabs.addTab(info_tab, _("Information"))
tabs.addTab(settings_tab, _("Settings"))
tabs.addTab(advanced_tab, _("Advanced"))
dialog_vbox = QVBoxLayout(self)
dialog_vbox.addWidget(tabs)
dialog_vbox.addLayout(Buttons(CloseButton(self)))
# Update information
invoke_client(None)