def doFit(ws,options):
rap_bins = range(1,len(jpsi.pTRange))
pt_bins = None
if options.testBin is not None:
rap_bins = [int(options.testBin.split(',')[0])]
pt_bins = [int(options.testBin.split(',')[1])-1]
for rap_bin in rap_bins:
if options.testBin is None:
pt_bins = range(len(jpsi.pTRange[rap_bin]))
for pt_bin in pt_bins:
sigMaxMass = jpsi.polMassJpsi[rap_bin] + jpsi.nSigMass*jpsi.sigmaMassJpsi[rap_bin]
sigMinMass = jpsi.polMassJpsi[rap_bin] - jpsi.nSigMass*jpsi.sigmaMassJpsi[rap_bin]
sbHighMass = jpsi.polMassJpsi[rap_bin] + jpsi.nSigBkgHigh*jpsi.sigmaMassJpsi[rap_bin]
sbLowMass = jpsi.polMassJpsi[rap_bin] - jpsi.nSigBkgLow*jpsi.sigmaMassJpsi[rap_bin]
jPsiMass = ws.var('JpsiMass')
jPsicTau = ws.var('Jpsict')
jPsiMass.setRange('mlfit_prompt',2.7,3.5)
jPsiMass.setRange('mlfit_nonPrompt',2.7,3.5)
jPsiMass.setRange('NormalizationRangeFormlfit_prompt',2.7,3.5)
jPsiMass.setRange('NormalizationRangeFormlfit_nonPrompt',2.7,3.5)
jPsicTau.setRange('mlfit_signal',-1,2.5)
jPsicTau.setRange('mlfit_leftMassSideBand',-1,2.5)
jPsicTau.setRange('mlfit_rightMassSideBand',-1,2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_signal',-1,2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_leftMassSideBand',-1,2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_rightMassSideBand',-1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_promptSignal',-1,.1)
#jPsicTau.setRange('NormalizationRangeFormlfit_nonPromptSignal',.1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_leftMassSideBand',-1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_rightMassSideBand',-1,2.5)
#jPsicTau.setRange('mlfit_promptSignal',-1,.1)
#jPsicTau.setRange('mlfit_nonPromptSignal',.1,2.5)
#jPsicTau.setRange('mlfit_leftMassSideBand',-1,2.5)
#jPsicTau.setRange('mlfit_rightMassSideBand',-1,2.5)
#reset parameters
ws.var('CBn').setVal(.5)
ws.var('CBalpha').setVal(.5)
ws.var('CBmass').setVal(3.1)
ws.var('CBsigma').setVal(.02)
ws.var('bkgLambda').setVal(0)
ws.var('bkgTauSSDL').setVal(.5)
#ws.var('bkgTauFDL').setVal(.5)
ws.var('bkgTauDSDL').setVal(.5)
ws.var('fBkgSSDL').setVal(.5)
ws.var('fBkgLR').setVal(.5)
ws.var('bkgTauSSDR').setVal(.5)
#ws.var('bkgTauFDR').setVal(.5)
ws.var('bkgTauDSDR').setVal(.5)
ws.var('fBkgSSDR').setVal(.5)
#ws.var('fBkgFDR').setVal(.25)
#ws.var('nPrompt').setVal(5000)
#ws.var('nNonPrompt').setVal(500)
#ws.var('nBackground').setVal(100)
#ws.var('nBackgroundL').setVal(50)
#ws.var('nBackgroundR').setVal(50)
ws.var('nonPromptTau').setVal(.5)
ws.var('promptMean').setVal(0)
ws.var('ctResolution').setVal(1)
LPdf = ws.pdf('LPdf')
MPdf = ws.pdf('MPdf')
data = ws.data('data_rap'+str(rap_bin)+'_pt'+str(pt_bin+1))
NLLs = RooArgSet()
MassNLL = MPdf.createNLL(data,
ROOT.RooFit.Range('mlfit'),
ROOT.RooFit.SplitRange(True),
ROOT.RooFit.ConditionalObservables(RooArgSet(ws.var('JpsictErr'))),
ROOT.RooFit.NumCPU(2))
CTauNLL = LPdf.createNLL(data,
ROOT.RooFit.Range('mlfit'),
ROOT.RooFit.SplitRange(True),
ROOT.RooFit.ConditionalObservables(RooArgSet(ws.var('JpsictErr'))),
ROOT.RooFit.NumCPU(2))
NLLs.add(MassNLL)
NLLs.add(CTauNLL)
simNLL = RooAddition('add','add',NLLs)
minuit = RooMinuit(simNLL)
minuit.setStrategy(2)
minuit.setPrintEvalErrors(-1)
minuit.simplex()
minuit.migrad()
minuit.migrad()
minuit.hesse()
fitresult = minuit.save('polfitresult_rap'+str(rap_bin)+'_pt'+str(pt_bin+1))
getattr(ws,'import')(fitresult)
ws.saveSnapshot('snapshot_rap'+str(rap_bin)+'_pt'+str(pt_bin+1),ws.allVars())
def main(infiles=None):
infile = infiles[0]
var = "leadmupt"
bounds = [25, 300]
c1 = ROOT.TCanvas("NLL", "NLL", 1000, 1000)
x = ROOT.RooRealVar(var, var, bounds[0], bounds[1])
aset = ROOT.RooArgSet(x, "aset")
frame = x.frame()
f = ROOT.TFile.Open(infile)
tree = f.Get(f.GetListOfKeys().At(0).GetName())
tree.Print()
nentries = tree.GetEntries()
y = []
dh2 = ROOT.TH1F()
data = ROOT.RooDataSet("Data", "Data", aset)
for n in range(nentries):
tree.GetEntry(n)
y.append(getattr(tree, var))
if y[n] <= bounds[1] and y[n] >= bounds[0]:
x.setVal(y[n])
data.add(aset)
dh2.Fill(y[n])
data.plotOn(frame)
dh = RooDataHist("dh", "dh", RooArgSet(x), data)
nbins = dh2.GetNbinsX()
nbinsy = dh2.GetNbinsX()
print("nbins: ", nbins)
print("nbinsy: ", nbinsy)
for i in range(nbins):
if dh2.GetBinContent(dh2.GetBin(i)) == 0:
print("bin: ", i)
#dh2.SetBinError(bin,0.01)
## CREATE GAUSSIAN MODEL
mx = RooRealVar("mx", "mx", 10, 0, 350)
sx = RooRealVar("sx", "sx", 3, 0, 10)
gx = RooGaussian("gx", "gx", x, mx, sx)
## CREATE EXPONENTIAL MODEL
lambda1 = RooRealVar("lambda1", "slope1", -100, 100)
expo1 = RooExponential("expo1", "exponential PDF 1", x, lambda1)
lambda2 = RooRealVar("lambda2", "slope2", -.03, -1000, 1000)
expo2 = RooExponential("expo2", "exponential PDF 2", x, lambda2)
l1 = RooRealVar("l1", "yield1", 100, 0, 10000)
l2 = RooRealVar("l2", "yield2", 100, 0, 10000)
#sum = RooAddPdf("sum","exp and gauss",RooArgList(expo1,gx),RooArgList(l1,l2))
sum = RooAddPdf("sum", "2 exps", RooArgList(expo1, expo2),
RooArgList(l1, l2))
## Construct binned likelihood
nll = RooNLLVar("nll", "nll", expo1, data, ROOT.RooFit.Extended(True))
## Start Minuit session on NLL
m = RooMinuit(nll)
m.migrad()
m.hesse()
r1 = m.save()
#sum.plotOn(frame,ROOT.RooFit.LineColor(1))
#sum.plotOn(frame,ROOT.RooFit.Components("expo1"),ROOT.RooFit.LineColor(2))
#sum.plotOn(frame,ROOT.RooFit.Components("expo2"),ROOT.RooFit.LineColor(3))
expo1.plotOn(frame)
## Construct Chi2
chi2 = RooChi2Var("chi2", "chi2", expo2, dh)
## Start Minuit session on Chi2
m2 = RooMinuit(chi2)
m2.migrad()
m2.hesse()
r2 = m2.save()
frame.Draw()
c2 = ROOT.TCanvas("Chi2", "Chi2", 1000, 1000)
frame2 = x.frame()
data.plotOn(frame2)
expo2.plotOn(frame2)
#sum.plotOn(frame2,ROOT.RooFit.LineColor(4))
#sum.plotOn(frame2,ROOT.RooFit.Components("expo1"),ROOT.RooFit.LineColor(5))
#sum.plotOn(frame2,ROOT.RooFit.Components("expo2"),ROOT.RooFit.LineColor(6))
## Print results
print("result of likelihood fit")
r1.Print("v")
print("result of chi2 fit")
r2.Print("v")
frame2.Draw()
c1.Draw()
c2.Draw()
rep = ''
while not rep in ['q', 'Q']:
rep = input('enter "q" to quit: ')
if 1 < len(rep):
rep = rep[0]
def doFit(ws,options):
rap_bins = range(1,len(jpsi.pTRange))
pt_bins = None
if options.testBin is not None:
rap_bins = [int(options.testBin.split(',')[0])]
pt_bins = [int(options.testBin.split(',')[1])-1]
for rap_bin in rap_bins:
if options.testBin is None:
pt_bins = range(len(jpsi.pTRange[rap_bin]))
for pt_bin in pt_bins:
sigMaxMass = jpsi.polMassJpsi[rap_bin] + jpsi.nSigMass*jpsi.sigmaMassJpsi[rap_bin]
sigMinMass = jpsi.polMassJpsi[rap_bin] - jpsi.nSigMass*jpsi.sigmaMassJpsi[rap_bin]
sbHighMass = jpsi.polMassJpsi[rap_bin] + jpsi.nSigBkgHigh*jpsi.sigmaMassJpsi[rap_bin]
sbLowMass = jpsi.polMassJpsi[rap_bin] - jpsi.nSigBkgLow*jpsi.sigmaMassJpsi[rap_bin]
jPsiMass = ws.var('JpsiMass')
jPsicTau = ws.var('Jpsict')
jPsiMass.setRange('mlfit_prompt',2.7,3.5)
jPsiMass.setRange('mlfit_nonPrompt',2.7,3.5)
jPsiMass.setRange('NormalizationRangeFormlfit_prompt',2.7,3.5)
jPsiMass.setRange('NormalizationRangeFormlfit_nonPrompt',2.7,3.5)
jPsicTau.setRange('mlfit_signal',-1,2.5)
jPsicTau.setRange('mlfit_leftMassSideBand',-1,2.5)
jPsicTau.setRange('mlfit_rightMassSideBand',-1,2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_signal',-1,2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_leftMassSideBand',-1,2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_rightMassSideBand',-1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_promptSignal',-1,.1)
#jPsicTau.setRange('NormalizationRangeFormlfit_nonPromptSignal',.1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_leftMassSideBand',-1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_rightMassSideBand',-1,2.5)
#jPsicTau.setRange('mlfit_promptSignal',-1,.1)
#jPsicTau.setRange('mlfit_nonPromptSignal',.1,2.5)
#jPsicTau.setRange('mlfit_leftMassSideBand',-1,2.5)
#jPsicTau.setRange('mlfit_rightMassSideBand',-1,2.5)
#reset parameters
ws.var('CBn').setVal(.5)
ws.var('CBalpha').setVal(.5)
ws.var('CBmass').setVal(3.1)
ws.var('CBsigma').setVal(.02)
ws.var('bkgLambda').setVal(0)
ws.var('bkgTauSSDL').setVal(.5)
#ws.var('bkgTauFDL').setVal(.5)
ws.var('bkgTauDSDL').setVal(.5)
ws.var('fBkgSSDL').setVal(.5)
ws.var('fBkgLR').setVal(.5)
ws.var('bkgTauSSDR').setVal(.5)
#ws.var('bkgTauFDR').setVal(.5)
ws.var('bkgTauDSDR').setVal(.5)
ws.var('fBkgSSDR').setVal(.5)
#ws.var('fBkgFDR').setVal(.25)
#ws.var('nPrompt').setVal(5000)
#ws.var('nNonPrompt').setVal(500)
#ws.var('nBackground').setVal(100)
#ws.var('nBackgroundL').setVal(50)
#ws.var('nBackgroundR').setVal(50)
ws.var('nonPromptTau').setVal(.5)
ws.var('promptMean').setVal(0)
ws.var('ctResolution').setVal(1)
if options.fixBfrac:
cutStringM1 = '('+jPsiMass.GetName()+' > '+str(sigMinMass)+' && '+jPsiMass.GetName()+' < '+str(sigMaxMass)+')'
data2 = ws.data('data_rap'+str(rap_bin)+'_pt'+str(pt_bin+1))
dataSizeBfrac1 = data2.numEntries()
print dataSizeBfrac1
bfracVars = RooArgSet(jPsiMass)
bfracData = data2.reduce(ROOT.RooFit.SelectVars(bfracVars),
ROOT.RooFit.Cut(cutStringM1),
ROOT.RooFit.Name('data_for_normalizing_bfrac'),
ROOT.RooFit.Title('data_for_normalizing_bfrac'))
print rap_bin
print pt_bin
bfrac = jpsi.Bfrac[rap_bin-1][pt_bin]
print bfrac
dataSizeBfrac = bfracData.numEntries()
factPrompt = 1-bfrac
dataSizePrompt = dataSizeBfrac*factPrompt
dataSizeNonPrompt = dataSizeBfrac*bfrac
print factPrompt
print dataSizeBfrac
print dataSizePrompt
print dataSizeNonPrompt
ws.var('nPromptSignal').setVal(dataSizePrompt)
ws.var('nNonPromptSignal').setVal(dataSizeNonPrompt)
ws.var('nPromptSignal').setConstant()
ws.var('nNonPromptSignal').setConstant()
LPdf = ws.pdf('LPdf')
MPdf = ws.pdf('MPdf')
data = ws.data('data_rap'+str(rap_bin)+'_pt'+str(pt_bin+1))
NLLs = RooArgSet()
MassNLL = MPdf.createNLL(data,
ROOT.RooFit.Range('mlfit'),
ROOT.RooFit.SplitRange(True),
ROOT.RooFit.ConditionalObservables(RooArgSet(ws.var('JpsictErr'))),
ROOT.RooFit.NumCPU(2))
CTauNLL = LPdf.createNLL(data,
ROOT.RooFit.Range('mlfit'),
ROOT.RooFit.SplitRange(True),
ROOT.RooFit.ConditionalObservables(RooArgSet(ws.var('JpsictErr'))),
ROOT.RooFit.NumCPU(2))
NLLs.add(MassNLL)
NLLs.add(CTauNLL)
simNLL = RooAddition('add','add',NLLs)
minuit = RooMinuit(simNLL)
minuit.setStrategy(2)
minuit.setPrintEvalErrors(-1)
if options.do_fit:
minuit.simplex()
minuit.migrad()
minuit.migrad()
minuit.hesse()
fitresult = minuit.save('polfitresult_rap'+str(rap_bin)+'_pt'+str(pt_bin+1))
getattr(ws,'import')(fitresult)
ws.saveSnapshot('snapshot_rap'+str(rap_bin)+'_pt'+str(pt_bin+1),ws.allVars())
fitresult.Print()
def rooFit601():
print ">>> setup pdf and likelihood..."
x = RooRealVar("x", "x", -20, 20)
mean = RooRealVar("mean", "mean of g1 and g2", 0)
sigma1 = RooRealVar("sigma1", "width of g1", 3)
sigma2 = RooRealVar("sigma2", "width of g2", 4, 3.0,
6.0) # intentional strong correlations
gauss1 = RooGaussian("gauss1", "gauss1", x, mean, sigma1)
gauss2 = RooGaussian("gauss2", "gauss2", x, mean, sigma2)
frac = RooRealVar("frac", "frac", 0.5, 0.0, 1.0)
model = RooAddPdf("model", "model", RooArgList(gauss1, gauss2),
RooArgList(frac))
print ">>> generate to data..."
data = model.generate(RooArgSet(x), 1000) # RooDataSet
print ">>> construct unbinned likelihood of model wrt data..."
nll = model.createNLL(data) # RooAbsReal
print ">>> interactive minimization and error analysis with MINUIT interface object..."
minuit = RooMinuit(nll)
print ">>> set avtive verbosity for logging of MINUIT parameter space stepping..."
minuit.setVerbose(kTRUE)
print ">>> call MIGRAD to minimize the likelihood..."
minuit.migrad()
print "\n>>> parameter values and error estimates that are back propagated from MINUIT:"
model.getParameters(RooArgSet(x)).Print("s")
print "\n>>> disable verbose logging..."
minuit.setVerbose(kFALSE)
print ">>> run HESSE to calculate errors from d2L/dp2..."
minuit.hesse()
print ">>> value of and error on sigma2 (back propagated from MINUIT):"
sigma2.Print()
print "\n>>> run MINOS on sigma2 parameter only..."
minuit.minos(RooArgSet(sigma2))
print "\n>>> value of and error on sigma2 (back propagated from MINUIT after running MINOS):"
sigma2.Print()
print "\n>>> saving results, contour plots..."
# Save a snapshot of the fit result. This object contains the initial
# fit parameters, the final fit parameters, the complete correlation
# matrix, the EDM, the minimized FCN , the last MINUIT status code and
# the number of times the RooFit function object has indicated evaluation
# problems (e.g. zero probabilities during likelihood evaluation)
result = minuit.save() # RooFitResult
# Make contour plot of mx vs sx at 1,2,3 sigma
frame1 = minuit.contour(frac, sigma2, 1, 2, 3) # RooPlot
frame1.SetTitle("RooMinuit contour plot")
# Print the fit result snapshot
result.Print("v")
print "\n>>> change value of \"mean\" parameter..."
mean.setVal(0.3)
# Rerun MIGRAD,HESSE
print ">>> rerun MIGRAD, HESSE..."
minuit.migrad()
minuit.hesse()
print ">>> value on and error of frac:"
frac.Print()
print "\n>>> fix value of \"sigma\" parameter (setConstant)..."
sigma2.setConstant(kTRUE)
print ">>> rerun MIGRAD, HESSE..."
minuit.migrad()
minuit.hesse()
frac.Print()
def doFit(ws, options):
rap_bins = range(1, len(jpsi.pTRange))
pt_bins = None
if options.testBin is not None:
rap_bins = [int(options.testBin.split(',')[0])]
pt_bins = [int(options.testBin.split(',')[1]) - 1]
for rap_bin in rap_bins:
if options.testBin is None:
pt_bins = range(len(jpsi.pTRange[rap_bin]))
for pt_bin in pt_bins:
sigMaxMass = jpsi.polMassJpsi[
rap_bin] + jpsi.nSigMass * jpsi.sigmaMassJpsi[rap_bin]
sigMinMass = jpsi.polMassJpsi[
rap_bin] - jpsi.nSigMass * jpsi.sigmaMassJpsi[rap_bin]
sbHighMass = jpsi.polMassJpsi[
rap_bin] + jpsi.nSigBkgHigh * jpsi.sigmaMassJpsi[rap_bin]
sbLowMass = jpsi.polMassJpsi[
rap_bin] - jpsi.nSigBkgLow * jpsi.sigmaMassJpsi[rap_bin]
jPsiMass = ws.var('JpsiMass')
jPsicTau = ws.var('Jpsict')
jPsiMass.setRange('mlfit_prompt', 2.7, 3.5)
jPsiMass.setRange('mlfit_nonPrompt', 2.7, 3.5)
jPsiMass.setRange('NormalizationRangeFormlfit_prompt', 2.7, 3.5)
jPsiMass.setRange('NormalizationRangeFormlfit_nonPrompt', 2.7, 3.5)
jPsicTau.setRange('mlfit_signal', -1, 2.5)
jPsicTau.setRange('mlfit_leftMassSideBand', -1, 2.5)
jPsicTau.setRange('mlfit_rightMassSideBand', -1, 2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_signal', -1, 2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_leftMassSideBand',
-1, 2.5)
jPsicTau.setRange('NormalizationRangeFormlfit_rightMassSideBand',
-1, 2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_promptSignal',-1,.1)
#jPsicTau.setRange('NormalizationRangeFormlfit_nonPromptSignal',.1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_leftMassSideBand',-1,2.5)
#jPsicTau.setRange('NormalizationRangeFormlfit_rightMassSideBand',-1,2.5)
#jPsicTau.setRange('mlfit_promptSignal',-1,.1)
#jPsicTau.setRange('mlfit_nonPromptSignal',.1,2.5)
#jPsicTau.setRange('mlfit_leftMassSideBand',-1,2.5)
#jPsicTau.setRange('mlfit_rightMassSideBand',-1,2.5)
#reset parameters
ws.var('CBn').setVal(.5)
ws.var('CBalpha').setVal(.5)
ws.var('CBmass').setVal(3.1)
ws.var('CBsigma').setVal(.02)
ws.var('bkgLambda').setVal(0)
ws.var('bkgTauSSDL').setVal(.5)
#ws.var('bkgTauFDL').setVal(.5)
ws.var('bkgTauDSDL').setVal(.5)
ws.var('fBkgSSDL').setVal(.5)
ws.var('fBkgLR').setVal(.5)
ws.var('bkgTauSSDR').setVal(.5)
#ws.var('bkgTauFDR').setVal(.5)
ws.var('bkgTauDSDR').setVal(.5)
ws.var('fBkgSSDR').setVal(.5)
#ws.var('fBkgFDR').setVal(.25)
#ws.var('nPrompt').setVal(5000)
#ws.var('nNonPrompt').setVal(500)
#ws.var('nBackground').setVal(100)
#ws.var('nBackgroundL').setVal(50)
#ws.var('nBackgroundR').setVal(50)
ws.var('nonPromptTau').setVal(.5)
ws.var('promptMean').setVal(0)
ws.var('ctResolution').setVal(1)
LPdf = ws.pdf('LPdf')
MPdf = ws.pdf('MPdf')
data = ws.data('data_rap' + str(rap_bin) + '_pt' + str(pt_bin + 1))
NLLs = RooArgSet()
MassNLL = MPdf.createNLL(
data, ROOT.RooFit.Range('mlfit'), ROOT.RooFit.SplitRange(True),
ROOT.RooFit.ConditionalObservables(
RooArgSet(ws.var('JpsictErr'))), ROOT.RooFit.NumCPU(2))
CTauNLL = LPdf.createNLL(
data, ROOT.RooFit.Range('mlfit'), ROOT.RooFit.SplitRange(True),
ROOT.RooFit.ConditionalObservables(
RooArgSet(ws.var('JpsictErr'))), ROOT.RooFit.NumCPU(2))
NLLs.add(MassNLL)
NLLs.add(CTauNLL)
simNLL = RooAddition('add', 'add', NLLs)
minuit = RooMinuit(simNLL)
minuit.setStrategy(2)
minuit.setPrintEvalErrors(-1)
minuit.simplex()
minuit.migrad()
minuit.migrad()
minuit.hesse()
fitresult = minuit.save('polfitresult_rap' + str(rap_bin) + '_pt' +
str(pt_bin + 1))
getattr(ws, 'import')(fitresult)
ws.saveSnapshot(
'snapshot_rap' + str(rap_bin) + '_pt' + str(pt_bin + 1),
ws.allVars())
def main(options,args):
eta_bins = [[0.0,1.4442]] # try to split material dependence
# [1.560,2.5]]
pt_bins = [[12, 15],
[15, 20]]
#get input workspace
input = TFile.Open(options.inputFile)
ws = input.Get(options.workspaceName).Clone()
input.Close()
#ws.Print("v")
sieie = RooRealVar(options.showerShapeName,options.showerShapeName,0)
pt = RooRealVar(options.ptName,options.ptName,0)
eta = RooRealVar(options.etaName,options.etaName,0)
chIso = RooRealVar(options.isoName,options.isoName,0)
vars = RooArgSet()
vars.add(sieie)
vars.add(pt)
vars.add(eta)
vars.add(chIso)
if options.MCFakeRate:
#chIso = RooRealVar(options.isoName, 'phHIso', 100, 0, 20)
fake = RooRealVar('FakePho','',-0.5,1.5)
vars.add(fake)
data = None
if options.weight is not None:
weight = RooRealVar(options.weight,'',.5)
vars.add(weight)
data = RooDataSet('data','All Input Data',
vars,
RooFit.ImportFromFile(options.dataFile,
options.dataTreeName),
RooFit.WeightVar(options.weight)
)
else:
data = RooDataSet('data','All Input Data',
vars,
RooFit.ImportFromFile(options.dataFile,
options.dataTreeName)
)
data.Print("v")
# put in the raw datasets, no cuts or manipulation
getattr(ws,'import')(data,
RooFit.RenameVariable(options.showerShapeName,'Pho_SigmaIEtaIEta'),
RooFit.RenameVariable(options.ptName,'Pho_Pt'),
RooFit.RenameVariable(options.etaName,'Pho_Eta'))
sieie = ws.var('Pho_SigmaIEtaIEta')
sieie.setRange('barrelSel',0,0.011)
sieie.setRange('endcapSel',0,0.033)
output = TFile.Open(options.outputFile,'RECREATE')
output.cd()
#histograms
fakeRate = []
nFakes = []
nTot = []
fakeRateMC = []
#counters
totBkg = [] #central value in each bin
totBkgUp = [] #upper error
totBkgLo = [] #lower error
ietabin = 0
#setup histograms and counters
for i in range(len(eta_bins)):
fakeRate.append(TGraphAsymmErrors())
fakeRate[i].SetName('fakeRate_etabin%d'%i)
nFakes.append(TGraphAsymmErrors())
nFakes[i].SetName('nFakes_etabin%d'%i)
nTot.append(TGraphAsymmErrors())
nTot[i].SetName('nTot_etabin%d'%i)
if options.MCFakeRate:
fakeRateMC.append(TGraphAsymmErrors())
fakeRateMC[i].SetName('fakeRateMC_etabin%d'%i)
totBkg.append(0)
totBkgUp.append(0)
totBkgLo.append(0)
#loop through bins making all fits
for etabin in eta_bins:
#pt bin number for TGraphs
iptbin = 0
for ptbin in pt_bins:
if 'abs(Pho_Eta) < 1.4442':
phoselsig = ' abs(Pho_Eta) > %f && abs(Pho_Eta) < %f && Pho_Pt > %f && Pho_Pt < %f'%(etabin[0],
etabin[1],
ptbin[0],
ptbin[1])
# if options.MCFakeRate:
phoselbkg = 'phoCHIso > 2 && phoCHIso < 6 && abs(Pho_Eta) > %f && abs(Pho_Eta) < %f && Pho_Pt > %f && Pho_Pt < %f'%(etabin[0],
etabin[1],
ptbin[0],
ptbin[1])
phosel= phoselsig or phoselbkg
#phosel = 'phoselsig || phoselbkg'
#phosel = 'abs(Pho_Eta) > %f && abs(Pho_Eta) < %f && Pho_Pt > %f && Pho_Pt < %f'%(etabin[0],
# etabin[1],
# ptbin[0],
# ptbin[1])
postfix = '_Eta_%.4f_%.4f_Pt_%.2f_%.2f'%(etabin[0],etabin[1],ptbin[0],ptbin[1])
binData = ws.data('data').reduce(RooFit.Cut(phosel),
RooFit.Name('binData'+postfix),
RooFit.Title('Data Events'))
#save it all in the workspace
getattr(ws,'import')(binData)
#create the PDFs we are going to fit!
options.pdfModule.makePdf(ws,etabin,postfix,options.extraInput)
output.cd()
ws.factory('RooExtendPdf::fullPDFExt'+postfix+'('+
'fullPDF'+postfix+',nTot'+postfix+'[2000,1e-8,10000])')
bNLL = ws.pdf('fullPDFExt'+postfix).createNLL(ws.data('binData'+postfix),
RooFit.Extended(True), RooFit.NumCPU(4))
bFit = RooMinuit(bNLL)
#bFit.setVerbose(True)
if ws.data('binData'+postfix).sumEntries() > 0:
bFit.setPrintLevel(-1)
bFit.migrad()
bFit.hesse()
bFit.setPrintLevel(0)
bFit.minos(RooArgSet(ws.var('fBkg'+postfix)))
bRes = bFit.save('binFitResult'+postfix)
getattr(ws,'import')(bRes)
#plot fits on top of data
bFrame = sieie.frame()
bFrame.SetName('binFrame'+postfix)
binData.plotOn(bFrame)
ws.pdf('fullPDFExt'+postfix).plotOn(bFrame, RooFit.LineColor(ROOT.kYellow))
#ws.pdf('fullPDFExt'+postfix).plotOn(bFramea)
ws.pdf('fullPDFExt'+postfix).plotOn(bFrame,
RooFit.Components('bkgTemplatePDF'+postfix),
RooFit.LineColor(ROOT.kBlue))
ws.pdf('fullPDFExt'+postfix).plotOn(bFrame,
RooFit.Components('sigTemplatePDF'+postfix),
RooFit.LineColor(ROOT.kRed))
ws.pdf('fullPDFExt'+postfix).plotOn(bFrame,
RooFit.Components('fullPDF'+postfix),
RooFit.LineColor(ROOT.kGreen))
bFrame.Write()
bSigInt = None
bBkgInt = None
#make plot of fake rate in signal region as a function of pT
#< 0.011 (EB), <0.030 (EE)
if etabin[0] >= 1.560:
bSigInt = ws.pdf('sigTemplatePDF'+
postfix).createIntegral(RooArgSet(sieie),
RooArgSet(sieie),
'endcapSel')
bBkgInt = ws.pdf('bkgTemplatePDF'+
postfix).createIntegral(RooArgSet(sieie),
RooArgSet(sieie),
'endcapSel')
else:
bSigInt = ws.pdf('sigTemplatePDF'+
postfix).createIntegral(RooArgSet(sieie),
RooArgSet(sieie),
'barrelSel')
bBkgInt = ws.pdf('bkgTemplatePDF'+
postfix).createIntegral(RooArgSet(sieie),
RooArgSet(sieie),
'barrelSel')
nEventsB = ws.var('nTot'+postfix).getVal()
nSignalB = (1.0 - ws.var('fBkg'+postfix).getVal())*nEventsB*bSigInt.getVal()
nBkgB = ws.var('fBkg'+postfix).getVal()*nEventsB*bBkgInt.getVal()
nBkgBUp = ws.var('fBkg'+postfix).getErrorHi()*nEventsB*bBkgInt.getVal()
nBkgBLo = -ws.var('fBkg'+postfix).getErrorLo()*nEventsB*bBkgInt.getVal()
print "Events Sig Bkg: %.3f + %.3f - %.3f"%(nEventsB, nSignalB, nBkgB)
trash = (1.0 - ws.var('fBkg'+postfix).getVal())
trash1 = bSigInt.getVal()
trash2 = bBkgInt.getVal()
trash3 = ws.var('fBkg'+postfix).getVal()
print nEventsB
print trash
print trash1
print trash2
print trash3
if nBkgBLo == 0.0: #catch cases when minos dies on lower limits
parb_err = ws.var('fBkg'+postfix).getError()*nEventsB*bBkgInt.getVal()
nBkgBLo = -max(nBkgB - parb_err,-nBkgB)
totBkg[ietabin] += nBkgB
totBkgUp[ietabin] = sqrt(nBkgBUp*nBkgBUp + totBkgUp[ietabin]*totBkgUp[ietabin])
totBkgLo[ietabin] = sqrt(nBkgBLo*nBkgBLo + totBkgLo[ietabin]*totBkgLo[ietabin])
print "Background Events: %.3f + %.3f - %.3f"%(nBkgB,nBkgBUp,nBkgBLo)
fakeRate[ietabin].SetPoint(iptbin,(float(ptbin[1])+float(ptbin[0]))/2,nBkgB/(nSignalB+nBkgB))
fakeRate[ietabin].SetPointError(iptbin,
(float(ptbin[1])+float(ptbin[0]))/2 - float(ptbin[0]),
float(ptbin[1]) - (float(ptbin[1])+float(ptbin[0]))/2,
-ws.var('fBkg'+postfix).getErrorLo(),
ws.var('fBkg'+postfix).getErrorHi())
#nFakes[ietabin].SetPoint(iptbin,(float(ptbin[1])+float(ptbin[0]))/2,nBkgB/(float(ptbin[1]) - float(ptbin[0])))
nFakes[ietabin].SetPoint(iptbin,(float(ptbin[1])+float(ptbin[0]))/2,nBkgB)
nFakes[ietabin].SetPointError(iptbin,
(float(ptbin[1])+float(ptbin[0]))/2 - float(ptbin[0]),
float(ptbin[1]) - (float(ptbin[1])+float(ptbin[0]))/2,
nBkgBLo/(float(ptbin[1]) - float(ptbin[0])),
nBkgBUp/(float(ptbin[1]) - float(ptbin[0])))
#nTot[ietabin].SetPoint(iptbin,(float(ptbin[1])+float(ptbin[0]))/2,nEventsB/(float(ptbin[1]) - float(ptbin[0])))
nTot[ietabin].SetPoint(iptbin,(float(ptbin[1])+float(ptbin[0]))/2,nEventsB)
nTot[ietabin].SetPointError(iptbin,
(float(ptbin[1])+float(ptbin[0]))/2 - float(ptbin[0]),
float(ptbin[1]) - (float(ptbin[1])+float(ptbin[0]))/2,
ws.var('nTot'+postfix).getError()/(float(ptbin[1]) - float(ptbin[0])),
ws.var('nTot'+postfix).getError()/(float(ptbin[1]) - float(ptbin[0])))
if options.MCFakeRate:
fr = 0
if etabin[0] > 1.560:
fr = (ws.data('binData'+postfix).sumEntries('FakePho > 0.5 && Pho_SigmaIEtaIEta < 0.030')/
ws.data('binData'+postfix).sumEntries('FakePho > -1 && Pho_SigmaIEtaIEta < 0.030'))
else:
fr = (ws.data('binData'+postfix).sumEntries('FakePho > 0.5 && Pho_SigmaIEtaIEta < 0.011')/
ws.data('binData'+postfix).sumEntries('FakePho > -1 && Pho_SigmaIEtaIEta < 0.011'))
fakeRateMC[ietabin].SetPoint(iptbin,(float(ptbin[1])+float(ptbin[0]))/2,fr)
fakeRateMC[ietabin].SetPointError(iptbin,
(float(ptbin[1])+float(ptbin[0]))/2 - float(ptbin[0]),
float(ptbin[1]) - (float(ptbin[1])+float(ptbin[0]))/2,
0,
0)
iptbin += 1
ietabin += 1
for i in range(len(eta_bins)):
print " %.4f < |Eta| < %.4f Total Background = %.3f +/- (%.3f,%.3f)"%(eta_bins[i][0],eta_bins[i][1],
totBkg[i],totBkgUp[i],totBkgLo[i])
fakeRate[i].Write()
nFakes[i].Write()
nTot[i].Write()
if options.MCFakeRate:
fakeRateMC[i].Write()
ws.Write()
output.Close()