def on_done(self, shelfToolName):
### Update config with new tool name
configAll = subPorts.getConfig()
configAll['shelftool'] = shelfToolName
# print(configAll)
plugin_path = '%s/SubTunnel' % (sublime.packages_path())
config = '%s/config.json' % plugin_path
f = open(config, 'w')
f.write(json.dumps(configAll))
f.close()
### Send the code
port = subPorts.getPort()
h = Tunnel(self.window,port)
code = h.codeAsText
python = "hou.shelves.tools()['%s'].setData('%s')" % (shelfToolName,code)
hscriptCmd = r'''python -c \"%s\"''' % python
cmd = r'''%s "%s"''' % (h.hcommand,hscriptCmd)
print ("CMD shelf:", cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
cmd_stdout, cmd_stderr = p.communicate()
def getNodeType(self):
''' get the selected node type '''
# Note a special treatment of backticks (bash specifics)
# cmd = ''' %s "optype -t opfind -N \"/\"\`opselectrecurse(\\"/\\",0)\`" ''' % self.hcommand
# This is just a regular hscript command you would launch from hscript shell in houdini
hscriptCmd = r'''optype -t opfind -N /`opselectrecurse("/",0)'''
# hscriptCmd = r'''optype -t opfind -N "/"opselectrecurse("/",0)''' # change on WIN
if os.name=='posix':
hscriptCmd = subPorts.escape(hscriptCmd, 1)
else:
hscriptCmd = subPorts.escape(hscriptCmd, 2) # dont escape backticks in a shell
# the command gets wrapped with double-quates - required by bash
# and prepanded with full path hcommand
cmd = r'''%s "%s"''' % (self.hcommand,hscriptCmd)
print ("CMD getNodeType:", cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
cmd_stdout, cmd_stderr = p.communicate()
selection = None
selection = cmd_stdout.decode('ascii').strip()
if selection == '':
print ("=== nothing selected ===")
print ("Node type: " ,selection)
return selection
def run(self):
if os.name=='posix':
pidsDict={}
pids = subPorts.getHoudiniPorts()
for pid,port in pids.items():
ports = {'port':-1,'hipfile':''} # pids ports
ports['port']=port
ports['hipfile']=subPorts.getHipName(port)
pidsDict[pid] = ports
else:
pidsDict = {}
try:
import SubTunnel.SubTunnelPortsWin as subWinPorts
pidsDict = subWinPorts.getHPorts()
except:
pass
print ("---", pidsDict)
portName_list = subPorts.buildPortList(pidsDict) # Build list
# pidsDict consist all the collected information
print ("All Pids:", pidsDict)
self.window.show_quick_panel(portName_list, lambda id: subPorts.savePort(id,pidsDict) ,sublime.MONOSPACE_FONT)
print ("Port Set")
pass
def getCodeAsText(self):
''' Introduce escape characters to avoid misinterpretation by the shell '''
view = self.window.active_view()
codeText = view.substr(sublime.Region(0, view.size()))
# Treat \n in the strings differently then new lines at the end of the line
temp = []
textSplited = re.split('((?s)".*?")', codeText)
for x in textSplited:
if os.name=='posix':
x = subPorts.escape(x)
else:
x = subPorts.escape(x,3) # WIN - code as text
temp.append(x)
codeText = r''.join(temp)
'''
this command works from the bash
hcommand 2223 "opparm /obj/geo1/python1 python \"print \\"______cccB\\" \" "
^ ^ ^ ^
queue single escape quote | |
double escape
'''
return codeText
def hdaRun(self,choice,hdaOptions,tunnel,tableAndOpName):
# Currently there is no support for the vex context in vex HDA SOP
if choice!=-1: # -1 is set when pressed ESC
hscriptCmd = r'''otcontentadd %s %s %s''' % (tableAndOpName, hdaOptions[choice], tunnel.filePath) # Hscript command
hscriptCmd = subPorts.escape(hscriptCmd, 1)
cmd = r'''%s "%s"''' % (tunnel.hcommand,hscriptCmd)
print ("CMD - HDA update",cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
def getNodePath(self):
''' get the node path '''
# cmd = ''' %s "opfind -N \"/\"\`opselectrecurse(\\"/\\",0)\`" ''' % self.hcommand # no space between \"/\"\`o
# cmd = r''' %s "opfind -N "/"\`opselectrecurse(\"/\",0)\`" ''' % self.hcommand # raw works too
hscriptCmd = r'''opfind -N "/"`opselectrecurse("/",0)''' # Hscript command
if os.name=='posix':
hscriptCmd = subPorts.escape(hscriptCmd, 1)
else:
hscriptCmd = subPorts.escape(hscriptCmd, 2)
cmd = r'''%s "%s"''' % (self.hcommand,hscriptCmd)
print ("CMD getNodePath:", cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
cmd_stdout, cmd_stderr = p.communicate()
nodePath = cmd_stdout.decode('ascii').strip()
print ("Node path: " ,nodePath)
return nodePath
def run(self):
prevShelfTool = subPorts.getConfig('shelftool')
print (prevShelfTool)
if prevShelfTool == None:
prevShelfTool="_"
self.window.show_input_panel("Shelf Tool Name:",prevShelfTool,self.on_done,None,None)
# self.window.show_quick_panel(portName_list, lambda id: subPorts.savePort(id,pidsDict) ,sublime.MONOSPACE_FONT)
pass
def run(self):
port = subPorts.getPort()
h = Tunnel(self.window,port)
# print (h.nodeType)
# print (h.nodePath)
# print (h.filePath) # path to the temporary code file
# print (h.getCodeAsText)
# print ('HIP',h.hipfile)
if h.nodeType in ['attribwrangle', 'pointwrangle', 'volumewrangle', 'popwrangle']: # VEX WRANGLE nodes
hscriptCmd = r'''opparm %s snippet \"%s\"''' % (h.nodePath,h.codeAsText) # Hscript command + \" around already escaped code
# hscriptCmd = subPorts.escape(hscriptCmd, 1) # No espcing here - the code already is escaped
cmd = r'''%s "%s"''' % (h.hcommand,hscriptCmd)
# cmd = ''' %s \"opparm %s snippet \\"%s\\" \"''' %(h.hcommand, h.nodePath,h.codeAsText)
print ("CMD - vexsop", cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
cmd_stdout, cmd_stderr = p.communicate()
elif h.nodeType in ['inline']: # INLINE VEX VOPSOP - same as wrangle nodes but with different param name
# cmd = ''' %s \"opparm %s code \\"%s\\" \"''' %(h.hcommand, h.nodePath,h.codeAsText)
hscriptCmd = r'''opparm %s code \"%s\"''' % (h.nodePath,h.codeAsText) # just and escape around codeAsText
cmd = r'''%s "%s"''' % (h.hcommand,hscriptCmd)
print ("CMD inline", cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
cmd_stdout, cmd_stderr = p.communicate()
elif h.nodeType == "python": # PYTHON SOP
# cmd = ''' %s \"opparm %s python \\"%s\\" \"''' %(h.hcommand, h.nodePath,h.codeAsText) # 2x backslash to have \" in terminal
hscriptCmd = r'''opparm %s python \"%s\"''' % (h.nodePath,h.codeAsText) # just and escape around codeAsText
cmd = r'''%s "%s"''' % (h.hcommand,hscriptCmd)
print ("CMD python sop", cmd)
p = subprocess.Popen(cmd, shell=True, stdout=subprocess.PIPE, stdin=subprocess.PIPE, stderr=subprocess.PIPE)
cmd_stdout, cmd_stderr = p.communicate()
elif h.nodeType=="": # In case no node is selected
portMesssage = '\tPort %s not opened' % h.port
self.window.show_quick_panel(['\tNo Node selected or...', portMesssage, '\t-> run openport -a in Houdini Textport', '\t-> rerun "Tunnel Sessions" to connect to running Houdini session'], 0 ,sublime.MONOSPACE_FONT)
else: # HDA code / scripts tab
# For hda find its type to determine what network it is suppose to go
tableAndOpName = self.getTableAndOpName(h.hcommand,h.nodePath)
hdaOptions = self.getHdaContent(h.hcommand,tableAndOpName)
hdaLabels = self.getHdaContent(h.hcommand,tableAndOpName)
print ("NTWK type: ", tableAndOpName)
print ("HDA Options:", hdaOptions)
info = ['','INFO:', 'File Path: {:>25s}'.format(h.hipfile), 'Node Path: {:>25s}'.format(h.nodePath), 'Node Type: {:>25s}'.format(tableAndOpName)]
hdaLabels.extend(info)
# TODO there is still a problem with vex otl where the
# otcontentadd Sop/testVex VexCode /home/kuba/temp/bbbbb.vex
# has no effect
self.window.run_command('save') # save the current sublime file
self.window.show_quick_panel(hdaLabels, lambda id: self.hdaRun(id,hdaOptions,h,tableAndOpName) ,sublime.MONOSPACE_FONT)
