def test_roundtrip_instance(tmpdir, process_count, loaded_container_registry):
instance_container = InstanceContainer("test_container")
instance_container.setName("Test Instance Container")
instance_container.setDefinition("inherits")
instance_container.setMetaDataEntry("test", "test")
instance_container.setProperty("test_setting_1", "value", 20)
temp_file = tmpdir.join("instance_container_test")
mp_run(process_count, write_data, temp_file, instance_container)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_container = InstanceContainer("test_container")
deserialized_container.setDefinition("inherits")
with unittest.mock.patch(
"UM.Settings.ContainerRegistry.ContainerRegistry.getInstance",
unittest.mock.MagicMock(
return_value=loaded_container_registry)):
deserialized_container.deserialize(result)
assert deserialized_container.getName() == instance_container.getName()
assert deserialized_container.getMetaData(
) == instance_container.getMetaData()
assert deserialized_container.getProperty(
"test_setting_1",
"value") == instance_container.getProperty("test_setting_1",
"value")
def _serialiseSettings(self, settings):
prefix = ";SETTING_" + str(
GCodeWriter.version) + " " # The prefix to put before each line.
prefix_length = len(prefix)
all_settings = InstanceContainer(
"G-code-imported-profile"
) #Create a new 'profile' with ALL settings so that the slice can be precisely reproduced.
all_settings.setDefinition(settings.getBottom())
for key in settings.getAllKeys():
all_settings.setProperty(
key, "value", settings.getProperty(key, "value")
) #Just copy everything over to the setting instance.
serialised = all_settings.serialize()
# Escape characters that have a special meaning in g-code comments.
pattern = re.compile("|".join(GCodeWriter.escape_characters.keys()))
# Perform the replacement with a regular expression.
serialised = pattern.sub(
lambda m: GCodeWriter.escape_characters[re.escape(m.group(0))],
serialised)
# Introduce line breaks so that each comment is no longer than 80 characters. Prepend each line with the prefix.
result = ""
# Lines have 80 characters, so the payload of each line is 80 - prefix.
for pos in range(0, len(serialised), 80 - prefix_length):
result += prefix + serialised[pos:pos + 80 - prefix_length] + "\n"
serialised = result
return serialised
def _performMerge(self,
merge_into: InstanceContainer,
merge: InstanceContainer,
clear_settings: bool = True) -> None:
if merge == merge_into:
return
'''isSolubile=False
for key in merge.getAllKeys():
if(key=="support_solubile"):
print("supporto solubile:=")
print(merge.getProperty(key, "value"))
if(merge.getProperty(key,"value")==True):#solubile enable
isSolubile=True
print("SOLUBILE?"+str(isSolubile))
'''
#remerge and set Property
for key in merge.getAllKeys():
#if(key == "support_bottom_distance" or key == "support_top_distance"):
#if(isSolubile):
# merge_into.setProperty(key, "value","0.0")
# print("SETTED OFFSET 0")
#else:
merge_into.setProperty(key, "value",
merge.getProperty(key, "value"))
if clear_settings:
#print("CLEAR SETTINGS")
merge.clear()
def test_roundtrip_instance(tmpdir, process_count, loaded_container_registry):
definition = loaded_container_registry.findDefinitionContainers(
id="inherits")[0]
instance_container = InstanceContainer("test_container")
instance_container.setName("Test Instance Container")
instance_container.setDefinition(definition)
instance_container.addMetaDataEntry("test", "test")
instance_container.setProperty("test_setting_1", "value", 20)
temp_file = tmpdir.join("instance_container_test")
mp_run(process_count, write_data, temp_file, instance_container)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_container = InstanceContainer("test_container")
deserialized_container.setDefinition(definition)
deserialized_container.deserialize(result)
assert deserialized_container.getName() == instance_container.getName()
assert deserialized_container.getMetaData(
) == instance_container.getMetaData()
assert deserialized_container.getProperty(
"test_setting_1",
"value") == instance_container.getProperty("test_setting_1",
"value")
def test_roundtrip_instance(tmpdir, process_count, loaded_container_registry):
definition = loaded_container_registry.findDefinitionContainers(id = "inherits")[0]
instance_container = InstanceContainer("test_container")
instance_container.setName("Test Instance Container")
instance_container.setDefinition(definition)
instance_container.addMetaDataEntry("test", "test")
instance_container.setProperty("test_setting_1", "value", 20)
temp_file = tmpdir.join("instance_container_test")
mp_run(process_count, write_data, temp_file, instance_container)
assert len(list(tmpdir.listdir())) == 1
results = mp_run(process_count, read_data, temp_file)
for result in results:
deserialized_container = InstanceContainer("test_container")
deserialized_container.setDefinition(definition)
deserialized_container.deserialize(result)
assert deserialized_container.getName() == instance_container.getName()
assert deserialized_container.getMetaData() == instance_container.getMetaData()
assert deserialized_container.getProperty("test_setting_1", "value") == instance_container.getProperty("test_setting_1", "value")
def _performMerge(self, merge_into: InstanceContainer, merge: InstanceContainer, clear_settings: bool = True) -> None:
if merge == merge_into:
return
for key in merge.getAllKeys():
merge_into.setProperty(key, "value", merge.getProperty(key, "value"))
if clear_settings:
merge.clear()
def _performMerge(self, merge_into: InstanceContainer, merge: InstanceContainer, clear_settings: bool = True) -> None:
if merge == merge_into:
return
for key in merge.getAllKeys():
merge_into.setProperty(key, "value", merge.getProperty(key, "value"))
if clear_settings:
merge.clear()
def _createFlattenedContainerInstance(self, instance_container1, instance_container2):
flat_container = InstanceContainer(instance_container2.getName())
flat_container.setDefinition(instance_container2.getDefinition())
flat_container.setMetaData(instance_container2.getMetaData())
for key in instance_container2.getAllKeys():
flat_container.setProperty(key, "value", instance_container2.getProperty(key, "value"))
for key in instance_container1.getAllKeys():
flat_container.setProperty(key, "value", instance_container1.getProperty(key, "value"))
return flat_container
def _createFlattenedContainerInstance(self, instance_container1, instance_container2):
flat_container = InstanceContainer(instance_container2.getName())
# The metadata includes id, name and definition
flat_container.setMetaData(copy.deepcopy(instance_container2.getMetaData()))
if instance_container1.getDefinition():
flat_container.setDefinition(instance_container1.getDefinition().getId())
for key in instance_container2.getAllKeys():
flat_container.setProperty(key, "value", instance_container2.getProperty(key, "value"))
for key in instance_container1.getAllKeys():
flat_container.setProperty(key, "value", instance_container1.getProperty(key, "value"))
return flat_container
def _createFlattenedContainerInstance(self, instance_container1, instance_container2):
flat_container = InstanceContainer(instance_container2.getName())
# The metadata includes id, name and definition
flat_container.setMetaData(copy.deepcopy(instance_container2.getMetaData()))
if instance_container1.getDefinition():
flat_container.setDefinition(instance_container1.getDefinition().getId())
for key in instance_container2.getAllKeys():
flat_container.setProperty(key, "value", instance_container2.getProperty(key, "value"))
for key in instance_container1.getAllKeys():
flat_container.setProperty(key, "value", instance_container1.getProperty(key, "value"))
return flat_container
def _serialiseSettings(self, settings):
prefix = ";SETTING_" + str(GCodeWriter.version) + " " # The prefix to put before each line.
prefix_length = len(prefix)
all_settings = InstanceContainer("G-code-imported-profile") #Create a new 'profile' with ALL settings so that the slice can be precisely reproduced.
all_settings.setDefinition(settings.getBottom())
for key in settings.getAllKeys():
all_settings.setProperty(key, "value", settings.getProperty(key, "value")) #Just copy everything over to the setting instance.
serialised = all_settings.serialize()
# Escape characters that have a special meaning in g-code comments.
pattern = re.compile("|".join(GCodeWriter.escape_characters.keys()))
# Perform the replacement with a regular expression.
serialised = pattern.sub(lambda m: GCodeWriter.escape_characters[re.escape(m.group(0))], serialised)
# Introduce line breaks so that each comment is no longer than 80 characters. Prepend each line with the prefix.
result = ""
# Lines have 80 characters, so the payload of each line is 80 - prefix.
for pos in range(0, len(serialised), 80 - prefix_length):
result += prefix + serialised[pos : pos + 80 - prefix_length] + "\n"
serialised = result
return serialised
def read(self, file_name):
if file_name.split(".")[-1] != "ini":
return None
global_container_stack = Application.getInstance().getGlobalContainerStack()
if not global_container_stack:
return None
multi_extrusion = global_container_stack.getProperty("machine_extruder_count", "value") > 1
if multi_extrusion:
Logger.log("e", "Unable to import legacy profile %s. Multi extrusion is not supported", file_name)
raise Exception("Unable to import legacy profile. Multi extrusion is not supported")
Logger.log("i", "Importing legacy profile from file " + file_name + ".")
profile = InstanceContainer("Imported Legacy Profile") # Create an empty profile.
parser = configparser.ConfigParser(interpolation = None)
try:
with open(file_name) as f:
parser.readfp(f) # Parse the INI file.
except Exception as e:
Logger.log("e", "Unable to open legacy profile %s: %s", file_name, str(e))
return None
# Legacy Cura saved the profile under the section "profile_N" where N is the ID of a machine, except when you export in which case it saves it in the section "profile".
# Since importing multiple machine profiles is out of scope, just import the first section we find.
section = ""
for found_section in parser.sections():
if found_section.startswith("profile"):
section = found_section
break
if not section: # No section starting with "profile" was found. Probably not a proper INI file.
return None
try:
with open(os.path.join(PluginRegistry.getInstance().getPluginPath("LegacyProfileReader"), "DictionaryOfDoom.json"), "r", -1, "utf-8") as f:
dict_of_doom = json.load(f) # Parse the Dictionary of Doom.
except IOError as e:
Logger.log("e", "Could not open DictionaryOfDoom.json for reading: %s", str(e))
return None
except Exception as e:
Logger.log("e", "Could not parse DictionaryOfDoom.json: %s", str(e))
return None
defaults = self.prepareDefaults(dict_of_doom)
legacy_settings = self.prepareLocals(parser, section, defaults) #Gets the settings from the legacy profile.
#Check the target version in the Dictionary of Doom with this application version.
if "target_version" not in dict_of_doom:
Logger.log("e", "Dictionary of Doom has no target version. Is it the correct JSON file?")
return None
if InstanceContainer.Version != dict_of_doom["target_version"]:
Logger.log("e", "Dictionary of Doom of legacy profile reader (version %s) is not in sync with the current instance container version (version %s)!", dict_of_doom["target_version"], str(InstanceContainer.Version))
return None
if "translation" not in dict_of_doom:
Logger.log("e", "Dictionary of Doom has no translation. Is it the correct JSON file?")
return None
current_printer_definition = global_container_stack.getBottom()
profile.setDefinition(current_printer_definition)
for new_setting in dict_of_doom["translation"]: # Evaluate all new settings that would get a value from the translations.
old_setting_expression = dict_of_doom["translation"][new_setting]
compiled = compile(old_setting_expression, new_setting, "eval")
try:
new_value = eval(compiled, {"math": math}, legacy_settings) # Pass the legacy settings as local variables to allow access to in the evaluation.
value_using_defaults = eval(compiled, {"math": math}, defaults) #Evaluate again using only the default values to try to see if they are default.
except Exception: # Probably some setting name that was missing or something else that went wrong in the ini file.
Logger.log("w", "Setting " + new_setting + " could not be set because the evaluation failed. Something is probably missing from the imported legacy profile.")
continue
definitions = current_printer_definition.findDefinitions(key = new_setting)
if definitions:
if new_value != value_using_defaults and definitions[0].default_value != new_value: # Not equal to the default in the new Cura OR the default in the legacy Cura.
profile.setProperty(new_setting, "value", new_value) # Store the setting in the profile!
if len(profile.getAllKeys()) == 0:
Logger.log("i", "A legacy profile was imported but everything evaluates to the defaults, creating an empty profile.")
profile.setDirty(True)
profile.addMetaDataEntry("type", "quality_changes")
profile.addMetaDataEntry("quality_type", "normal")
return profile
def read(self, file_name):
if file_name.split(".")[-1] != "ini":
return None
global_container_stack = Application.getInstance(
).getGlobalContainerStack()
if not global_container_stack:
return None
multi_extrusion = global_container_stack.getProperty(
"machine_extruder_count", "value") > 1
if multi_extrusion:
Logger.log(
"e",
"Unable to import legacy profile %s. Multi extrusion is not supported",
file_name)
raise Exception(
"Unable to import legacy profile. Multi extrusion is not supported"
)
Logger.log("i",
"Importing legacy profile from file " + file_name + ".")
profile = InstanceContainer(
"Imported Legacy Profile") # Create an empty profile.
parser = configparser.ConfigParser(interpolation=None)
try:
with open(file_name) as f:
parser.readfp(f) #Parse the INI file.
except Exception as e:
Logger.log("e", "Unable to open legacy profile %s: %s", file_name,
str(e))
return None
#Legacy Cura saved the profile under the section "profile_N" where N is the ID of a machine, except when you export in which case it saves it in the section "profile".
#Since importing multiple machine profiles is out of scope, just import the first section we find.
section = ""
for found_section in parser.sections():
if found_section.startswith("profile"):
section = found_section
break
if not section: #No section starting with "profile" was found. Probably not a proper INI file.
return None
try:
with open(
os.path.join(
PluginRegistry.getInstance().getPluginPath(
"LegacyProfileReader"), "DictionaryOfDoom.json"),
"r", -1, "utf-8") as f:
dict_of_doom = json.load(f) #Parse the Dictionary of Doom.
except IOError as e:
Logger.log("e",
"Could not open DictionaryOfDoom.json for reading: %s",
str(e))
return None
except Exception as e:
Logger.log("e", "Could not parse DictionaryOfDoom.json: %s",
str(e))
return None
defaults = self.prepareDefaults(dict_of_doom)
legacy_settings = self.prepareLocals(
parser, section,
defaults) #Gets the settings from the legacy profile.
#Check the target version in the Dictionary of Doom with this application version.
if "target_version" not in dict_of_doom:
Logger.log(
"e",
"Dictionary of Doom has no target version. Is it the correct JSON file?"
)
return None
if InstanceContainer.Version != dict_of_doom["target_version"]:
Logger.log(
"e",
"Dictionary of Doom of legacy profile reader (version %s) is not in sync with the current instance container version (version %s)!",
dict_of_doom["target_version"], str(InstanceContainer.Version))
return None
if "translation" not in dict_of_doom:
Logger.log(
"e",
"Dictionary of Doom has no translation. Is it the correct JSON file?"
)
return None
current_printer_definition = global_container_stack.getBottom()
profile.setDefinition(current_printer_definition)
for new_setting in dict_of_doom[
"translation"]: #Evaluate all new settings that would get a value from the translations.
old_setting_expression = dict_of_doom["translation"][new_setting]
compiled = compile(old_setting_expression, new_setting, "eval")
try:
new_value = eval(
compiled, {"math": math}, legacy_settings
) #Pass the legacy settings as local variables to allow access to in the evaluation.
value_using_defaults = eval(
compiled, {"math": math}, defaults
) #Evaluate again using only the default values to try to see if they are default.
except Exception: #Probably some setting name that was missing or something else that went wrong in the ini file.
Logger.log(
"w", "Setting " + new_setting +
" could not be set because the evaluation failed. Something is probably missing from the imported legacy profile."
)
continue
definitions = current_printer_definition.findDefinitions(
key=new_setting)
if definitions:
if new_value != value_using_defaults and definitions[
0].default_value != new_value: # Not equal to the default in the new Cura OR the default in the legacy Cura.
profile.setProperty(
new_setting, "value",
new_value) # Store the setting in the profile!
if len(profile.getAllKeys()) == 0:
Logger.log(
"i",
"A legacy profile was imported but everything evaluates to the defaults, creating an empty profile."
)
profile.setDirty(True)
profile.addMetaDataEntry("type", "quality_changes")
profile.addMetaDataEntry("quality_type", "normal")
return profile
def read(self, file_name):
if file_name.split(".")[-1] != "ini":
return None
global_container_stack = Application.getInstance(
).getGlobalContainerStack()
if not global_container_stack:
return None
multi_extrusion = global_container_stack.getProperty(
"machine_extruder_count", "value") > 1
if multi_extrusion:
Logger.log(
"e",
"Unable to import legacy profile %s. Multi extrusion is not supported",
file_name)
raise Exception(
"Unable to import legacy profile. Multi extrusion is not supported"
)
Logger.log("i",
"Importing legacy profile from file " + file_name + ".")
container_registry = ContainerRegistry.getInstance()
profile_id = container_registry.uniqueName("Imported Legacy Profile")
profile = InstanceContainer(profile_id) # Create an empty profile.
parser = configparser.ConfigParser(interpolation=None)
try:
parser.read([file_name]) # Parse the INI file.
except Exception as e:
Logger.log("e", "Unable to open legacy profile %s: %s", file_name,
str(e))
return None
# Legacy Cura saved the profile under the section "profile_N" where N is the ID of a machine, except when you export in which case it saves it in the section "profile".
# Since importing multiple machine profiles is out of scope, just import the first section we find.
section = ""
for found_section in parser.sections():
if found_section.startswith("profile"):
section = found_section
break
if not section: # No section starting with "profile" was found. Probably not a proper INI file.
return None
try:
with open(
os.path.join(
PluginRegistry.getInstance().getPluginPath(
"LegacyProfileReader"), "DictionaryOfDoom.json"),
"r", -1, "utf-8") as f:
dict_of_doom = json.load(f) # Parse the Dictionary of Doom.
except IOError as e:
Logger.log("e",
"Could not open DictionaryOfDoom.json for reading: %s",
str(e))
return None
except Exception as e:
Logger.log("e", "Could not parse DictionaryOfDoom.json: %s",
str(e))
return None
defaults = self.prepareDefaults(dict_of_doom)
legacy_settings = self.prepareLocals(
parser, section,
defaults) #Gets the settings from the legacy profile.
#Check the target version in the Dictionary of Doom with this application version.
if "target_version" not in dict_of_doom:
Logger.log(
"e",
"Dictionary of Doom has no target version. Is it the correct JSON file?"
)
return None
if InstanceContainer.Version != dict_of_doom["target_version"]:
Logger.log(
"e",
"Dictionary of Doom of legacy profile reader (version %s) is not in sync with the current instance container version (version %s)!",
dict_of_doom["target_version"], str(InstanceContainer.Version))
return None
if "translation" not in dict_of_doom:
Logger.log(
"e",
"Dictionary of Doom has no translation. Is it the correct JSON file?"
)
return None
current_printer_definition = global_container_stack.definition
profile.setDefinition(current_printer_definition.getId())
for new_setting in dict_of_doom[
"translation"]: # Evaluate all new settings that would get a value from the translations.
old_setting_expression = dict_of_doom["translation"][new_setting]
compiled = compile(old_setting_expression, new_setting, "eval")
try:
new_value = eval(
compiled, {"math": math}, legacy_settings
) # Pass the legacy settings as local variables to allow access to in the evaluation.
value_using_defaults = eval(
compiled, {"math": math}, defaults
) #Evaluate again using only the default values to try to see if they are default.
except Exception: # Probably some setting name that was missing or something else that went wrong in the ini file.
Logger.log(
"w", "Setting " + new_setting +
" could not be set because the evaluation failed. Something is probably missing from the imported legacy profile."
)
continue
definitions = current_printer_definition.findDefinitions(
key=new_setting)
if definitions:
if new_value != value_using_defaults and definitions[
0].default_value != new_value: # Not equal to the default in the new Cura OR the default in the legacy Cura.
profile.setProperty(
new_setting, "value",
new_value) # Store the setting in the profile!
if len(profile.getAllKeys()) == 0:
Logger.log(
"i",
"A legacy profile was imported but everything evaluates to the defaults, creating an empty profile."
)
profile.addMetaDataEntry("type", "profile")
# don't know what quality_type it is based on, so use "normal" by default
profile.addMetaDataEntry("quality_type", "normal")
profile.setName(profile_id)
profile.setDirty(True)
#Serialise and deserialise in order to perform the version upgrade.
parser = configparser.ConfigParser(interpolation=None)
data = profile.serialize()
parser.read_string(data)
parser["general"]["version"] = "1"
if parser.has_section("values"):
parser["settings"] = parser["values"]
del parser["values"]
stream = io.StringIO()
parser.write(stream)
data = stream.getvalue()
profile.deserialize(data)
#We need to return one extruder stack and one global stack.
global_container_id = container_registry.uniqueName(
"Global Imported Legacy Profile")
global_profile = profile.duplicate(
new_id=global_container_id, new_name=profile_id
) #Needs to have the same name as the extruder profile.
global_profile.setDirty(True)
#Only the extruder stack has an extruder metadata entry.
profile.addMetaDataEntry(
"extruder",
ExtruderManager.getInstance().getActiveExtruderStack().definition.
getId())
#Split all settings into per-extruder and global settings.
for setting_key in profile.getAllKeys():
settable_per_extruder = global_container_stack.getProperty(
setting_key, "settable_per_extruder")
if settable_per_extruder:
global_profile.removeInstance(setting_key)
else:
profile.removeInstance(setting_key)
return [global_profile, profile]
def read(self, file_name):
if file_name.split(".")[-1] != "ini":
return None
global_container_stack = Application.getInstance().getGlobalContainerStack()
if not global_container_stack:
return None
multi_extrusion = global_container_stack.getProperty("machine_extruder_count", "value") > 1
if multi_extrusion:
Logger.log("e", "Unable to import legacy profile %s. Multi extrusion is not supported", file_name)
raise Exception("Unable to import legacy profile. Multi extrusion is not supported")
Logger.log("i", "Importing legacy profile from file " + file_name + ".")
container_registry = ContainerRegistry.getInstance()
profile_id = container_registry.uniqueName("Imported Legacy Profile")
profile = InstanceContainer(profile_id) # Create an empty profile.
parser = configparser.ConfigParser(interpolation = None)
try:
parser.read([file_name]) # Parse the INI file.
except Exception as e:
Logger.log("e", "Unable to open legacy profile %s: %s", file_name, str(e))
return None
# Legacy Cura saved the profile under the section "profile_N" where N is the ID of a machine, except when you export in which case it saves it in the section "profile".
# Since importing multiple machine profiles is out of scope, just import the first section we find.
section = ""
for found_section in parser.sections():
if found_section.startswith("profile"):
section = found_section
break
if not section: # No section starting with "profile" was found. Probably not a proper INI file.
return None
try:
with open(os.path.join(PluginRegistry.getInstance().getPluginPath("LegacyProfileReader"), "DictionaryOfDoom.json"), "r", encoding = "utf-8") as f:
dict_of_doom = json.load(f) # Parse the Dictionary of Doom.
except IOError as e:
Logger.log("e", "Could not open DictionaryOfDoom.json for reading: %s", str(e))
return None
except Exception as e:
Logger.log("e", "Could not parse DictionaryOfDoom.json: %s", str(e))
return None
defaults = self.prepareDefaults(dict_of_doom)
legacy_settings = self.prepareLocals(parser, section, defaults) #Gets the settings from the legacy profile.
#Check the target version in the Dictionary of Doom with this application version.
if "target_version" not in dict_of_doom:
Logger.log("e", "Dictionary of Doom has no target version. Is it the correct JSON file?")
return None
if InstanceContainer.Version != dict_of_doom["target_version"]:
Logger.log("e", "Dictionary of Doom of legacy profile reader (version %s) is not in sync with the current instance container version (version %s)!", dict_of_doom["target_version"], str(InstanceContainer.Version))
return None
if "translation" not in dict_of_doom:
Logger.log("e", "Dictionary of Doom has no translation. Is it the correct JSON file?")
return None
current_printer_definition = global_container_stack.definition
quality_definition = current_printer_definition.getMetaDataEntry("quality_definition")
if not quality_definition:
quality_definition = current_printer_definition.getId()
profile.setDefinition(quality_definition)
for new_setting in dict_of_doom["translation"]: # Evaluate all new settings that would get a value from the translations.
old_setting_expression = dict_of_doom["translation"][new_setting]
compiled = compile(old_setting_expression, new_setting, "eval")
try:
new_value = eval(compiled, {"math": math}, legacy_settings) # Pass the legacy settings as local variables to allow access to in the evaluation.
value_using_defaults = eval(compiled, {"math": math}, defaults) #Evaluate again using only the default values to try to see if they are default.
except Exception: # Probably some setting name that was missing or something else that went wrong in the ini file.
Logger.log("w", "Setting " + new_setting + " could not be set because the evaluation failed. Something is probably missing from the imported legacy profile.")
continue
definitions = current_printer_definition.findDefinitions(key = new_setting)
if definitions:
if new_value != value_using_defaults and definitions[0].default_value != new_value: # Not equal to the default in the new Cura OR the default in the legacy Cura.
profile.setProperty(new_setting, "value", new_value) # Store the setting in the profile!
if len(profile.getAllKeys()) == 0:
Logger.log("i", "A legacy profile was imported but everything evaluates to the defaults, creating an empty profile.")
profile.addMetaDataEntry("type", "profile")
# don't know what quality_type it is based on, so use "normal" by default
profile.addMetaDataEntry("quality_type", "normal")
profile.setName(profile_id)
profile.setDirty(True)
#Serialise and deserialise in order to perform the version upgrade.
parser = configparser.ConfigParser(interpolation=None)
data = profile.serialize()
parser.read_string(data)
parser["general"]["version"] = "1"
if parser.has_section("values"):
parser["settings"] = parser["values"]
del parser["values"]
stream = io.StringIO()
parser.write(stream)
data = stream.getvalue()
profile.deserialize(data)
# The definition can get reset to fdmprinter during the deserialization's upgrade. Here we set the definition
# again.
profile.setDefinition(quality_definition)
#We need to return one extruder stack and one global stack.
global_container_id = container_registry.uniqueName("Global Imported Legacy Profile")
global_profile = profile.duplicate(new_id = global_container_id, new_name = profile_id) #Needs to have the same name as the extruder profile.
global_profile.setDirty(True)
profile_definition = "fdmprinter"
from UM.Util import parseBool
if parseBool(global_container_stack.getMetaDataEntry("has_machine_quality", "False")):
profile_definition = global_container_stack.getMetaDataEntry("quality_definition")
if not profile_definition:
profile_definition = global_container_stack.definition.getId()
global_profile.setDefinition(profile_definition)
return [global_profile]