def __update(self):
""" do init if necessary; update module parameters """
self.__init()
# update input
dataInConnect = self.importModule.dataConnectionPoint(
self.params.variable)
if not self.__lastDataConnection == None:
disconnect(self.__lastDataConnection, self.__colorsIn)
else:
theNet().connect(self.__colors, 'TextureOut0', self.__collect,
'TextureIn0')
if dataInConnect:
connect(
self.importModule.dataConnectionPoint(self.params.variable),
self.__colorsIn)
self.__lastDataConnection = self.importModule.dataConnectionPoint(
self.params.variable)
_infoer.function = str(self.__update)
_infoer.write(": updating to variable " + self.params.variable)
# update colormap settings
self.__colors.set_numSteps(self.params.numSteps)
def setParams(self, params, negMsgHandler=None, sendToCover=True):
""" set parameters from outside """
_infoer.function = str(self.setParams)
_infoer.write("setParams")
if not params.isVisible == self.params.isVisible:
if params.isVisible and not self.__connected:
connect(self.connectionPoint(), globalRenderer().connectionPoint())
self.__connected = True
elif not params.isVisible and self.__connected:
disconnect(self.connectionPoint(), globalRenderer().connectionPoint())
self.__connected = False
realChange = ParamsDiff(self.params, params)
VisItem.setParams(self, params, negMsgHandler, sendToCover)
if params.clickedSensorID != None:
msg = coGRObjSensorEventMsg(coGRMsg.SENSOR_EVENT, params.filename, params.clickedSensorID, True, True)
covise.sendRendMsg(msg.c_str())
msg = coGRObjSensorEventMsg(coGRMsg.SENSOR_EVENT, params.filename, params.clickedSensorID, True, False)
covise.sendRendMsg(msg.c_str())
# clickedSensorButtonEvent was handled and can be removed
self.params.clickedSensorID = None
self.sendParams()
def testTransientReduceSetData(self):
moduleCount = theNet().moduleCount()
gip_core = self._TransientGroup()
gip = ImportGroupReduceSet(gip_core)
gip.setReductionFactor(2)
value = 'Pressure'
c = Colors()
theNet().add(c)
connect( gip.dataConnectionPoint(value), ConnectionPoint( c, 'Data' ) )
coll = Collect()
theNet().add(coll)
connect( gip.geoConnectionPoint(), ConnectionPoint( coll, 'grid' ) )
theNet().connect( c, 'texture', coll, 'textures' )
theNet().connect( coll, 'geometry', globalRenderer()._module, 'RenderData')
gip.executeGeo()
gip.executeData(value)
(a,b) = gip.getDataMinMax(value)
self.assertEqual((a,b),(-0.018360999999999999, 2.0))
# delete
theNet().remove(c)
theNet().remove(coll)
gip.delete()
gip_core.delete()
self._RemoveImportGroupModules()
self.assertEqual(theNet().moduleCount(), moduleCount)
def executeData(self, varName):
self.__initData(varName)
# reconnect data
if varName in self.__dataInConnectionPoints.keys():
theNet().disconnectAllFromModulePort(
self.__dataInConnectionPoints[varName].module,
self.__dataInConnectionPoints[varName].port)
connect(ParentClass.dataConnectionPoint(self, varName),
self.__dataInConnectionPoints[varName])
# wenn voriges Modul tatsaechlich executed wurde, dann nicht mehr selbst executen
if ParentClass.executeData(self, varName) == True:
self.__needExecuteData[varName] = False
return True
if not self.__needExecuteData[varName]:
return False
self.__needExecuteData[varName] = False
if varName in self.__dataInConnectionPoints.keys():
saveExecute(self.__dataInConnectionPoints[varName].module)
return True
return False
def setParams(self, params, negMsgHandler=None, sendToCover=True):
""" set parameters from outside """
_infoer.function = str(self.setParams)
_infoer.write("setParams")
if not params.isVisible == self.params.isVisible:
if params.isVisible and not self.__connected:
connect(self.connectionPoint(),
globalRenderer().connectionPoint())
self.__connected = True
elif not params.isVisible and self.__connected:
disconnect(self.connectionPoint(),
globalRenderer().connectionPoint())
self.__connected = False
realChange = ParamsDiff(self.params, params)
VisItem.setParams(self, params, negMsgHandler, sendToCover)
if params.clickedSensorID != None:
msg = coGRObjSensorEventMsg(coGRMsg.SENSOR_EVENT, params.filename,
params.clickedSensorID, True, True)
covise.sendRendMsg(msg.c_str())
msg = coGRObjSensorEventMsg(coGRMsg.SENSOR_EVENT, params.filename,
params.clickedSensorID, True, False)
covise.sendRendMsg(msg.c_str())
# clickedSensorButtonEvent was handled and can be removed
self.params.clickedSensorID = None
self.sendParams()
def testTransientReduceSetData(self):
moduleCount = theNet().moduleCount()
gip_core = self._TransientGroup()
gip = ImportGroupReduceSet(gip_core)
gip.setReductionFactor(2)
value = 'Pressure'
c = Colors()
theNet().add(c)
connect(gip.dataConnectionPoint(value), ConnectionPoint(c, 'Data'))
coll = Collect()
theNet().add(coll)
connect(gip.geoConnectionPoint(), ConnectionPoint(coll, 'grid'))
theNet().connect(c, 'texture', coll, 'textures')
theNet().connect(coll, 'geometry',
globalRenderer()._module, 'RenderData')
gip.executeGeo()
gip.executeData(value)
(a, b) = gip.getDataMinMax(value)
self.assertEqual((a, b), (-0.018360999999999999, 2.0))
# delete
theNet().remove(c)
theNet().remove(coll)
gip.delete()
gip_core.delete()
self._RemoveImportGroupModules()
self.assertEqual(theNet().moduleCount(), moduleCount)
def getBox(self, forceExecute = False):
""" return the bounding box """
if self._bb==None:
self._bb = BoundingBox()
theNet().add( self._bb)
connect( self.geoConnectionPoint(), ConnectionPoint( self._bb, 'GridIn0' ) )
# Clear info queue so we dont read a previous BB output.
# (If something goes wrong with the queue, this could be the reason.)
coviseStartup.globalReceiverThread.infoQueue.clear()
if not self.executeGeo():
saveExecute(self._bb)
boxParser = BoundingBoxParser()
boxParser.parseQueue(coviseStartup.globalReceiverThread.infoQueue)
self._boundingBox = boxParser.getBox()
elif forceExecute:
# Clear info queue so we dont read a previous BB output.
# (If something goes wrong with the queue, this could be the reason.)
coviseStartup.globalReceiverThread.infoQueue.clear()
if not self.executeGeo():
saveExecute(self._bb)
boxParser = BoundingBoxParser()
boxParser.parseQueue(coviseStartup.globalReceiverThread.infoQueue)
try:
oldbb = self._boundingBox
self._boundingBox = boxParser.getBox()
except (ValueError):
self._boundingBox = oldbb
return self._boundingBox
def executeOct(self):
self.octTreeConnectionPoint()
one_executed = False
#quickfix
#save/loading of a 2d composed probing point does not work with this
#for part in self._parts:
# if part.executeOct():
# one_executed = True
numPorts = 0
numModules = 0
for part in self._parts:
# dont reconnect BlockCollect inter-connections
if (numPorts % 15 == 0) and (numModules != 0):
numPorts += 1
theNet().disconnectAllFromModulePort(self._collectOct[numModules].objInConnectionPoint(numPorts).module, self._collectOct[numModules].objInConnectionPoint(numPorts).port)
connect(part.octTreeConnectionPoint(), self._collectOct[numModules].objInConnectionPoint(numPorts))
numPorts = numPorts + 1
if numPorts % 15 == 0:
numModules = numModules +1
numPorts = 0
if part.executeOct():
one_executed = True
if not one_executed and self._firstTimeOct:
for bc in self._collectOct:
bc.execute()
one_executed = True
self._firstTimeOct = False
return one_executed
def dataConnectionPoint(self, varname):
if not varname in self._assembleUsg:
self._initAssemble(varname)
connect(ImportGroupModule.geoConnectionPoint(self),
self._assembleUsg[varname].geoInConnectionPoint())
connect(ImportGroupModule.dataConnectionPoint(self, varname),
self._assembleUsg[varname].dataInConnectionPoint())
return self._assembleUsg[varname].dataOutConnectionPoint()
def geoConnectionPoint(self, varname=None):
if varname==None:
if self._assembleGeo==None:
self._initAssembleGeo()
connect( ImportGroupModule.geoConnectionPoint(self), self._assembleGeo.geoInConnectionPoint() )
return self._assembleGeo.geoOutConnectionPoint()
else:
self.dataConnectionPoint(varname)
return self._assembleUsg[varname].geoOutConnectionPoint()
def _update(self, negMsgHandler):
''' _update is called from the run method to update the module parameter before execution
+ do init the module if necessary
update module parameters should be realized in the parent class'''
self._init(negMsgHandler)
if not hasattr(self, 'importModule'):
return
# update input
# vec variable
# vec variable is not changable from the Gui at the moment
#scalar variable
if not self._lastScalarConnection == None:
for scalarInput in self._scalarInputNames:
disconnect(self._lastScalarConnection,
ConnectionPoint(self._module, scalarInput))
if hasattr(self.params, 'secondVariable') and len(
self._scalarInputNames
) > 0 and not self.params.secondVariable == None:
self.importModule.executeData(self.params.secondVariable)
scalarInConnect = self.importModule.dataConnectionPoint(
self.params.secondVariable)
if scalarInConnect:
for scalarInput in self._scalarInputNames:
connect(scalarInConnect,
ConnectionPoint(self._module, scalarInput))
self._lastScalarConnection = scalarInConnect
# starting points from 2d part
if not self._last2DPartConnection == None:
part2D = globalKeyHandler().getObject(self.params.use2DPartKey)
if not part2D or not self._last2DPartConnection == part2D.importModule.geoConnectionPoint(
):
for partInput in self._2DPartInputNames:
disconnect(self._last2DPartConnection,
ConnectionPoint(self._module, partInput))
self._last2DPartConnection = None
if len(
self._2DPartInputNames
) > 0 and self.params.use2DPartKey != None and self.params.use2DPartKey >= 0 and self._last2DPartConnection == None:
# sampling removed at the moment
part2D = globalKeyHandler().getObject(self.params.use2DPartKey)
part2D.importModule.executeGeo()
for partInput in self._2DPartInputNames:
connect(part2D.importModule.geoConnectionPoint(),
ConnectionPoint(self._module, partInput))
if self._firstGeoForVars:
self._firstGeoForVars = False
#setTransform to module
negMsgHandler.run(self.params.use2DPartKey)
self._last2DPartConnection = part2D.importModule.geoConnectionPoint(
)
self._module.setTitle(self.params.name)
def _init(self, negMsgHandler, module, colorMapPortName = 'ColormapIn0'):
'''_init is called from _update
connect color map
'''
# check if ColorCreator already exists
if len(self.objects)==0:
self._initColor(negMsgHandler)
if len(self.objects)>0 and self.__colorMap:
self._visualizerColorCP = ConnectionPoint(module, colorMapPortName)
connect( (self.objects[0]).colorMapConnectionPoint(), self._visualizerColorCP )
def geoConnectionPoint(self, varname=None):
if varname == None:
if self._assembleGeo == None:
self._initAssembleGeo()
connect(ImportGroupModule.geoConnectionPoint(self),
self._assembleGeo.geoInConnectionPoint())
return self._assembleGeo.geoOutConnectionPoint()
else:
self.dataConnectionPoint(varname)
return self._assembleUsg[varname].geoOutConnectionPoint()
def __init(self):
""" start COVISE Module and connect output to COVER """
if self.__addAttribute==None :
self.__addAttribute = AddAttribute()
theNet().add(self.__addAttribute)
self.__addAttribute.set_attrName( "COLOR" )
addAttributeIn = ConnectionPoint( self.__addAttribute, 'inObject' )
self.__addAttributeOut = ConnectionPoint( self.__addAttribute, 'outObject' )
connect( self.importModule.geoConnectionPoint(), addAttributeIn )
VisItem.connectToCover( self, self )
def __init(self):
""" start COVISE Module and connect output to COVER """
if self.__addAttribute == None:
self.__addAttribute = AddAttribute()
theNet().add(self.__addAttribute)
self.__addAttribute.set_attrName("COLOR")
addAttributeIn = ConnectionPoint(self.__addAttribute, 'inObject')
self.__addAttributeOut = ConnectionPoint(self.__addAttribute,
'outObject')
connect(self.importModule.geoConnectionPoint(), addAttributeIn)
VisItem.connectToCover(self, self)
def run(self, runmode, negMsgHandler, module, afterRecreation=False):
if os.getenv('VR_PREPARE_DEBUG_RUN'):
print("PartColoredVis.run")
'''create a new visulisation'''
#assert negMsgHandler
if runmode==RUN_ALL:
if not hasattr(self, 'importModule'):
return False
_infoer.function = str(self.run)
_infoer.write("go colored vis for %s" % self.params.variable)
PartColoredVis._update(self, negMsgHandler)
#update colortable at the first time after recreation
#if afterRecreation and len(self.objects)>0:
# colorCreator = self.objects[0]
# return colorCreator.run(RUN_ALL)
#if not self.__needExecute:
# # TODO: self.__needExecute zu oft auf False -> geaenderte color map wird nicht uebernommen
# #return False
#self.__needExecute = False
"""
# to be sure that the import module loaded all data
self.importModule.executeOct()
if not self.importModule.executeData(self.currentVariable()):
if len(self.objects)>0:
colorCreator = self.objects[0]
# the colorCreator contains a colors module which is connected to the import of the tracer
# implicit execution of the tracer module
colorCreator.run(RUN_ALL)
return True
#else:
# module.execute()
"""
if len(self.objects)>0:
colorCreator = self.objects[0]
if self._visualizerColorCP:
# Since we dont know if the visualizers module is actually ready to execute,
# we dont want it to be executed along with the colors module.
# Therefore the disconnect.
disconnect(colorCreator.colorMapConnectionPoint(), self._visualizerColorCP)
colorCreator.run(RUN_ALL)
if self._visualizerColorCP:
connect(colorCreator.colorMapConnectionPoint(), self._visualizerColorCP)
return False # always return False because the visualizers module is disconnected and wont be executed
def __init(self):
""" start COVISE modules and connect output to COVER """
if self.__colors==None and self.__collect==None:
self.__colors = Colors()
theNet().add(self.__colors)
self.__colorsIn = ConnectionPoint(self.__colors, 'GridIn0')
self.__collect = Collect()
theNet().add(self.__collect)
self.__collectOut = ConnectionPoint(self.__collect, 'GeometryOut0')
connect( self.importModule.geoConnectionPoint(), ConnectionPoint(self.__collect, 'GridIn0') )
VisItem.connectToCover( self, self )
def __init(self):
""" start COVISE modules and connect output to COVER """
if self.__colors == None and self.__collect == None:
self.__colors = Colors()
theNet().add(self.__colors)
self.__colorsIn = ConnectionPoint(self.__colors, 'GridIn0')
self.__collect = Collect()
theNet().add(self.__collect)
self.__collectOut = ConnectionPoint(self.__collect, 'GeometryOut0')
connect(self.importModule.geoConnectionPoint(),
ConnectionPoint(self.__collect, 'GridIn0'))
VisItem.connectToCover(self, self)
def connectToCover(self, visConnectionModule):
self.__creationModule = visConnectionModule
VRPCoviseNetAccess.connect(visConnectionModule.connectionPoint(),
globalRenderer().connectionPoint())
if os.getenv('VR_PREPARE_DEBUG_VISITEMS_DIR'):
#filename = os.getenv('VR_PREPARE_DEBUG_VISITEMS_DIR') + '/' + self.params.name + "_%s.covise" % self.key
#rw = RWCoviseModule(filename, True)
#filename = rw.gridPath()
#connect( visConnectionModule.connectionPoint(), rw.inConnectionPoint() )
filename = os.getenv('VR_PREPARE_DEBUG_VISITEMS_DIR') + '/' \
+ self.params.name + "_" + str(self.key) + ".covise"
self.__debugRwModule = RWCoviseModule(filename, True)
connect(visConnectionModule.connectionPoint(),
self.__debugRwModule.inConnectionPoint())
def testGroupData(gip):
value = 'Temperature'
c = Colors()
theNet().add(c)
connect( gip.dataConnectionPoint(value), ConnectionPoint( c, 'Data' ) )
gip.executeData(value)
coll = Collect()
theNet().add(coll)
connect( gip.geoConnectionPoint(value), ConnectionPoint( coll, 'grid' ) )
theNet().connect( c, 'texture', coll, 'textures' )
r = Renderer()
theNet().add(r)
theNet().connect( coll, 'geometry', r, 'RenderData')
c.execute()
def connectToCover( self, visConnectionModule ):
self.__creationModule = visConnectionModule
VRPCoviseNetAccess.connect(
visConnectionModule.connectionPoint(),
globalRenderer().connectionPoint() )
if os.getenv('VR_PREPARE_DEBUG_VISITEMS_DIR'):
#filename = os.getenv('VR_PREPARE_DEBUG_VISITEMS_DIR') + '/' + self.params.name + "_%s.covise" % self.key
#rw = RWCoviseModule(filename, True)
#filename = rw.gridPath()
#connect( visConnectionModule.connectionPoint(), rw.inConnectionPoint() )
filename = os.getenv('VR_PREPARE_DEBUG_VISITEMS_DIR') + '/' \
+ self.params.name + "_" + str(self.key) + ".covise"
self.__debugRwModule = RWCoviseModule(filename, True)
connect( visConnectionModule.connectionPoint(), self.__debugRwModule.inConnectionPoint() )
def getDataMinMax( self, variable):
""" return min and max value of variable """
if variable==None:
return
if self._minMax==None:
self._minMax = Colors()
theNet().add(self._minMax)
theNet().disconnectAllFromModulePort( self._minMax, 'DataIn0' )
connect(self.dataConnectionPoint(variable), ConnectionPoint(self._minMax, 'DataIn0'))
if not self.executeData( variable ):
saveExecute(self._minMax)
return ( float(self._minMax.getParamValue('MinMax')[0]),\
float(self._minMax.getParamValue('MinMax')[1]) )
def getDataMinMax(self, variable):
""" return min and max value of variable """
if variable==None:
return
if self._minMax==None:
self._minMax = Colors()
theNet().add(self._minMax)
theNet().disconnectAllFromModulePort( self._minMax, 'DataIn0' )
connect(self.dataConnectionPoint(variable), ConnectionPoint(self._minMax, 'DataIn0'))
self.executeData( variable )
saveExecute(self._minMax)
return ( float(self._minMax.getParamValue('MinMax')[0]),\
float(self._minMax.getParamValue('MinMax')[1]) )
def getBoxFromGeoRWCovise(self):
""" return the bounding box from the originally unfiltered geometry """
if self.__boundingBoxFromGeoRWCovise == None:
self.__bbFromGeoRWCovise = BoundingBox()
theNet().add(self.__bbFromGeoRWCovise)
connect( self._geo.connectionPoint(), ConnectionPoint(self.__bbFromGeoRWCovise, 'GridIn0'))
# Clear info queue so we dont read a previous BB output.
# (If something goes wrong with the queue, this could be the reason.)
coviseStartup.globalReceiverThread.infoQueue_.clear()
saveExecute(self.__bbFromGeoRWCovise)
boxParser = BoundingBoxParser()
boxParser.parseQueue(coviseStartup.globalReceiverThread.infoQueue_)
self.__boundingBoxFromGeoRWCovise = boxParser.getBox()
return self.__boundingBoxFromGeoRWCovise
def __initGeo(self):
# init rotation
if self.__rotAngle == 0 and self.__rotations == []:
pass
else:
if self.__rotAngle != 0 and self.__rotations == []:
self.__rotations.append(TransformModule())
self.__rotations[0].setRotation(self.__rotAngle, self.__rotX,
self.__rotY, self.__rotZ)
self.__needExecuteGeo = True
self.__geoInConnectionPoint = self.__rotations[
0].geoInConnectionPoint()
if self.__translation == None:
self.__geoConnectionPoint = self.__rotations[
0].geoOutConnectionPoint()
else:
theNet().disconnectAllFromModulePort(
self.__translation.geoInConnectionPoint().module,
self.__translation.geoInConnectionPoint().port)
connect(self.__rotations[0].geoOutConnectionPoint(),
self.__translation.geoInConnectionPoint())
# init translation
if (self.__transX, self.__transY,
self.__transZ) == (0, 0, 0) and self.__translation == None:
pass
else:
if (self.__transX, self.__transY,
self.__transZ) != (0, 0, 0) and self.__translation == None:
self.__translation = TransformModule()
self.__translation.setTranslation(self.__transX, self.__transY,
self.__transZ)
self.__needExecuteGeo = True
if self.__rotations == []:
self.__geoInConnectionPoint = self.__translation.geoInConnectionPoint(
)
else:
theNet().disconnectAllFromModulePort(
self.__rotations[0].geoOutConnectionPoint().module,
self.__rotations[0].geoOutConnectionPoint().port)
connect(self.__rotations[0].geoOutConnectionPoint(),
self.__translation.geoInConnectionPoint())
self.__geoConnectionPoint = self.__translation.geoOutConnectionPoint(
)
def executeGeo(self):
# reconnect geometry
if self.__reduceSetModules != []:
theNet().disconnectAllFromModulePort(self.__reduceSetModules[0].geoInConnectionPoint().module, self.__reduceSetModules[0].geoInConnectionPoint().port)
connect( ParentClass.geoConnectionPoint(self), self.__reduceSetModules[0].geoInConnectionPoint() )
# wenn voriges Modul tatsaechlich executed wurde, dann nicht mehr selbst executen
if ParentClass.executeGeo(self) == True:
return True
if not self.__needExecute:
return False
self.__needExecute = False
if self.__reduceSetModules != []:
self.__reduceSetModules[0].execute()
return True
def _update(self, negMsgHandler):
''' _update is called from the run method to update the module parameter before execution
+ do init the module if necessary
update module parameters should be realized in the parent class'''
self._init(negMsgHandler)
if not hasattr(self, 'importModule'):
return
# update input
# vec variable
# vec variable is not changable from the Gui at the moment
#scalar variable
if not self._lastScalarConnection==None :
for scalarInput in self._scalarInputNames:
disconnect( self._lastScalarConnection, ConnectionPoint(self._module, scalarInput))
if hasattr(self.params, 'secondVariable') and len(self._scalarInputNames)>0 and not self.params.secondVariable==None:
self.importModule.executeData(self.params.secondVariable)
scalarInConnect = self.importModule.dataConnectionPoint(self.params.secondVariable)
if scalarInConnect:
for scalarInput in self._scalarInputNames:
connect( scalarInConnect, ConnectionPoint(self._module, scalarInput) )
self._lastScalarConnection=scalarInConnect
# starting points from 2d part
if not self._last2DPartConnection==None:
part2D = globalKeyHandler().getObject(self.params.use2DPartKey)
if not part2D or not self._last2DPartConnection==part2D.importModule.geoConnectionPoint():
for partInput in self._2DPartInputNames:
disconnect( self._last2DPartConnection, ConnectionPoint(self._module, partInput))
self._last2DPartConnection = None
if len(self._2DPartInputNames)>0 and self.params.use2DPartKey!=None and self.params.use2DPartKey>=0 and self._last2DPartConnection==None:
# sampling removed at the moment
part2D = globalKeyHandler().getObject(self.params.use2DPartKey)
part2D.importModule.executeGeo()
for partInput in self._2DPartInputNames:
connect( part2D.importModule.geoConnectionPoint(), ConnectionPoint(self._module, partInput) )
if self._firstGeoForVars:
self._firstGeoForVars = False
#setTransform to module
negMsgHandler.run(self.params.use2DPartKey)
self._last2DPartConnection=part2D.importModule.geoConnectionPoint()
self._module.setTitle( self.params.name )
def getBoxFromGeoRWCovise(self):
""" return the bounding box from the originally unfiltered geometry """
if self.__boundingBoxFromGeoRWCovise == None:
self.__bbFromGeoRWCovise = BoundingBox()
theNet().add(self.__bbFromGeoRWCovise)
connect(self._geo.connectionPoint(),
ConnectionPoint(self.__bbFromGeoRWCovise, 'GridIn0'))
# Clear info queue so we dont read a previous BB output.
# (If something goes wrong with the queue, this could be the reason.)
coviseStartup.globalReceiverThread.infoQueue_.clear()
saveExecute(self.__bbFromGeoRWCovise)
boxParser = BoundingBoxParser()
boxParser.parseQueue(coviseStartup.globalReceiverThread.infoQueue_)
self.__boundingBoxFromGeoRWCovise = boxParser.getBox()
return self.__boundingBoxFromGeoRWCovise
def _initObj( self, bclist, connectionPoint, part_cnt):
if len(bclist)==0:
bc = BlockCollectModule(self.getIsTransient())
bclist.append( bc )
port = part_cnt
elif part_cnt>=15:
# number of block collect module
nb = (part_cnt-15) / 14 + 1
if nb==len(bclist):
bc = BlockCollectModule(self.getIsTransient())
bclist.append( bc )
connect( bclist[ len(bclist)-2].objOutConnectionPoint(), bc.objInConnectionPoint(0) )
else:
bc = bclist[nb]
port = (part_cnt-15) % 14 + 1
else:
bc = bclist[0]
port = part_cnt
connect( connectionPoint, bc.objInConnectionPoint(port) )
def testGroupData(self):
moduleCount = theNet().moduleCount()
gip = self._LargeSimpleGroup()
value = 'Temperature'
c = Colors()
theNet().add(c)
connect( gip.dataConnectionPoint(value), ConnectionPoint( c, 'Data' ) )
coll = Collect()
theNet().add(coll)
connect( gip.geoConnectionPoint(), ConnectionPoint( coll, 'grid' ) )
theNet().connect( c, 'texture', coll, 'textures' )
theNet().connect( coll, 'geometry', globalRenderer()._module, 'RenderData')
gip.executeGeo()
gip.executeData(value)
# delete
theNet().remove(c)
theNet().remove(coll)
gip.delete()
self._RemoveImportGroupModules()
self.assertEqual(theNet().moduleCount(), moduleCount)
def executeGeo(self):
# reconnect geometry
if self.__reduceSetModules != []:
theNet().disconnectAllFromModulePort(
self.__reduceSetModules[0].geoInConnectionPoint().module,
self.__reduceSetModules[0].geoInConnectionPoint().port)
connect(ParentClass.geoConnectionPoint(self),
self.__reduceSetModules[0].geoInConnectionPoint())
# wenn voriges Modul tatsaechlich executed wurde, dann nicht mehr selbst executen
if ParentClass.executeGeo(self) == True:
return True
if not self.__needExecute:
return False
self.__needExecute = False
if self.__reduceSetModules != []:
self.__reduceSetModules[0].execute()
return True
def __update(self):
""" do init if necessary; update module parameters """
self.__init()
# update input
dataInConnect = self.importModule.dataConnectionPoint(self.params.variable)
if not self.__lastDataConnection==None :
disconnect( self.__lastDataConnection, self.__colorsIn )
else :
theNet().connect(self.__colors, 'TextureOut0', self.__collect, 'TextureIn0')
if dataInConnect:
connect( self.importModule.dataConnectionPoint(self.params.variable), self.__colorsIn )
self.__lastDataConnection=self.importModule.dataConnectionPoint(self.params.variable)
_infoer.function = str(self.__update)
_infoer.write(": updating to variable " + self.params.variable )
# update colormap settings
self.__colors.set_numSteps(self.params.numSteps)
def executeGeo(self):
self.__initGeo()
# reconnect geometry
if self.__geoInConnectionPoint != None:
theNet().disconnectAllFromModulePort(self.__geoInConnectionPoint.module, self.__geoInConnectionPoint.port)
connect(ParentClass.geoConnectionPoint(self), self.__geoInConnectionPoint)
# wenn voriges Modul tatsaechlich executed wurde, dann nicht mehr selbst executen
if ParentClass.executeGeo(self) == True:
self.__needExecuteGeo = False
return True
if not self.__needExecuteGeo:
return False
self.__needExecuteGeo = False
if self.__geoInConnectionPoint != None:
saveExecute(self.__geoInConnectionPoint.module)
return False
def _initObj(self, bclist, connectionPoint, part_cnt):
if len(bclist) == 0:
bc = BlockCollectModule(self.getIsTransient())
bclist.append(bc)
port = part_cnt
elif part_cnt >= 15:
# number of block collect module
nb = (part_cnt - 15) / 14 + 1
if nb == len(bclist):
bc = BlockCollectModule(self.getIsTransient())
bclist.append(bc)
connect(bclist[len(bclist) - 2].objOutConnectionPoint(),
bc.objInConnectionPoint(0))
else:
bc = bclist[nb]
port = (part_cnt - 15) % 14 + 1
else:
bc = bclist[0]
port = part_cnt
connect(connectionPoint, bc.objInConnectionPoint(port))
def testGroupData(self):
moduleCount = theNet().moduleCount()
gip = self._LargeSimpleGroup()
value = 'Temperature'
c = Colors()
theNet().add(c)
connect(gip.dataConnectionPoint(value), ConnectionPoint(c, 'Data'))
coll = Collect()
theNet().add(coll)
connect(gip.geoConnectionPoint(), ConnectionPoint(coll, 'grid'))
theNet().connect(c, 'texture', coll, 'textures')
theNet().connect(coll, 'geometry',
globalRenderer()._module, 'RenderData')
gip.executeGeo()
gip.executeData(value)
# delete
theNet().remove(c)
theNet().remove(coll)
gip.delete()
self._RemoveImportGroupModules()
self.assertEqual(theNet().moduleCount(), moduleCount)
def __init(self):
""" start COVISE ReadCAD Module """
if self.__readCad == None:
self.__readCad = ReadCAD()
theNet().add(self.__readCad)
self.__readCadPolyOut = ConnectionPoint(self.__readCad, 'mesh')
self.__readCadNormalsOut = ConnectionPoint(self.__readCad,
'Normals')
self.__readCadColorsOut = ConnectionPoint(self.__readCad,
'colorOut')
self.__readCad.set_catia_server('obie')
self.__readCad.set_catia_server_port('7000')
self.__readCad.set_partIndex(self.__index)
self.__readCad.set_file_path(self.__filename)
self.__collect = Collect()
theNet().add(self.__collect)
connect(self.__readCadPolyOut,
ConnectionPoint(self.__collect, 'GridIn0'))
connect(self.__readCadNormalsOut,
ConnectionPoint(self.__collect, 'DataIn1'))
connect(self.__readCadColorsOut,
ConnectionPoint(self.__collect, 'DataIn0'))
self.__connectGeoOut = ConnectionPoint(self.__collect,
'GeometryOut0')
def executeGeo(self):
self.__initGeo()
# reconnect geometry
if self.__geoInConnectionPoint != None:
theNet().disconnectAllFromModulePort(
self.__geoInConnectionPoint.module,
self.__geoInConnectionPoint.port)
connect(ParentClass.geoConnectionPoint(self),
self.__geoInConnectionPoint)
# wenn voriges Modul tatsaechlich executed wurde, dann nicht mehr selbst executen
if ParentClass.executeGeo(self) == True:
self.__needExecuteGeo = False
return True
if not self.__needExecuteGeo:
return False
self.__needExecuteGeo = False
if self.__geoInConnectionPoint != None:
saveExecute(self.__geoInConnectionPoint.module)
return False
def __initGeo(self):
# init rotation
if self.__rotAngle == 0 and self.__rotations == []:
pass
else:
if self.__rotAngle != 0 and self.__rotations == []:
self.__rotations.append(TransformModule())
self.__rotations[0].setRotation(self.__rotAngle, self.__rotX, self.__rotY, self.__rotZ)
self.__needExecuteGeo = True
self.__geoInConnectionPoint = self.__rotations[0].geoInConnectionPoint()
if self.__translation == None:
self.__geoConnectionPoint = self.__rotations[0].geoOutConnectionPoint()
else:
theNet().disconnectAllFromModulePort(
self.__translation.geoInConnectionPoint().module, self.__translation.geoInConnectionPoint().port
)
connect(self.__rotations[0].geoOutConnectionPoint(), self.__translation.geoInConnectionPoint())
# init translation
if (self.__transX, self.__transY, self.__transZ) == (0, 0, 0) and self.__translation == None:
pass
else:
if (self.__transX, self.__transY, self.__transZ) != (0, 0, 0) and self.__translation == None:
self.__translation = TransformModule()
self.__translation.setTranslation(self.__transX, self.__transY, self.__transZ)
self.__needExecuteGeo = True
if self.__rotations == []:
self.__geoInConnectionPoint = self.__translation.geoInConnectionPoint()
else:
theNet().disconnectAllFromModulePort(
self.__rotations[0].geoOutConnectionPoint().module,
self.__rotations[0].geoOutConnectionPoint().port,
)
connect(self.__rotations[0].geoOutConnectionPoint(), self.__translation.geoInConnectionPoint())
self.__geoConnectionPoint = self.__translation.geoOutConnectionPoint()
def executeOct(self):
self.octTreeConnectionPoint()
one_executed = False
#quickfix
#save/loading of a 2d composed probing point does not work with this
#for part in self._parts:
# if part.executeOct():
# one_executed = True
numPorts = 0
numModules = 0
for part in self._parts:
# dont reconnect BlockCollect inter-connections
if (numPorts % 15 == 0) and (numModules != 0):
numPorts += 1
theNet().disconnectAllFromModulePort(
self._collectOct[numModules].objInConnectionPoint(
numPorts).module,
self._collectOct[numModules].objInConnectionPoint(
numPorts).port)
connect(
part.octTreeConnectionPoint(),
self._collectOct[numModules].objInConnectionPoint(numPorts))
numPorts = numPorts + 1
if numPorts % 15 == 0:
numModules = numModules + 1
numPorts = 0
if part.executeOct():
one_executed = True
if not one_executed and self._firstTimeOct:
for bc in self._collectOct:
bc.execute()
one_executed = True
self._firstTimeOct = False
return one_executed
def executeData(self, varName):
self.__initData(varName)
# reconnect data
if varName in self.__dataInConnectionPoints.keys():
theNet().disconnectAllFromModulePort(
self.__dataInConnectionPoints[varName].module, self.__dataInConnectionPoints[varName].port
)
connect(ParentClass.dataConnectionPoint(self, varName), self.__dataInConnectionPoints[varName])
# wenn voriges Modul tatsaechlich executed wurde, dann nicht mehr selbst executen
if ParentClass.executeData(self, varName) == True:
self.__needExecuteData[varName] = False
return True
if not self.__needExecuteData[varName]:
return False
self.__needExecuteData[varName] = False
if varName in self.__dataInConnectionPoints.keys():
saveExecute(self.__dataInConnectionPoints[varName].module)
return True
return False
def __update(self, negMsgHandler):
""" __update is called from the run method to update the module parameter before execution
+ do init
+ update module parameters """
self.__init(negMsgHandler)
PartModuleVis._update(self, negMsgHandler)
if self.params.color==VARIABLE:
PartColoredVis._update(self, negMsgHandler)
self._setTransform()
if not hasattr(self, 'importModule'):
return
#set color for variable
if not self.__lastColorConnection==None:
disconnect(self.__lastColorConnection, ConnectionPoint(self._module, 'DataIn0'))
self.__lastColorConnection=None
if self.__lastColorConnection==None and self.params.variable!=None \
and self.params.variable!='Select a variable' and self.params.color == VARIABLE and len(self.objects)>0:
_infoer.function = str(self.__update)
_infoer.write("connection color for variable %s " % self.params.variable)
self.__lastColorConnection = (self.objects[0]).colorContConnectionPoint()
connect(self.__lastColorConnection, ConnectionPoint(self._module, 'DataIn0'))
def _initOct(self):
self._initGeo()
if self._oct == None:
# create or use disk-cached octtrees
if enableCachedOctTrees == True and self._dim == 3:
basename, extension = os.path.splitext(self._part.filename)
self._octTreeFileName = basename + ".octtree" + extension
print("self._octTreeFileName = ", self._octTreeFileName)
if os.path.isfile(self._octTreeFileName) == False:
# create disk-cached octtree
self._octTreeFileExists = False
self._oct = MakeOctTree()
theNet().add(self._oct)
self._octIn = ConnectionPoint(self._oct, 'inGrid')
self._octOut = ConnectionPoint(self._oct, 'outOctTree')
connect(self.geoConnectionPoint(), self._octIn)
# connect RWCovise to MakeOctTree
self._octTreeWriter = RWCovise() # writable
theNet().add(self._octTreeWriter)
self._octTreeWriter.set_grid_path(self._octTreeFileName)
connect(self._octOut,
ConnectionPoint(self._octTreeWriter, 'mesh_in'))
else:
# use disk-cached octtree
self._octTreeFileExists = True
self._oct = RWCovise()
theNet().add(self._oct)
self._oct.set_grid_path(self._octTreeFileName)
# cached octtrees must never get an input connection (RWCovise!)
self._octIn = None # ConnectionPoint(self._oct, 'mesh_in')
self._octOut = ConnectionPoint(self._oct, 'mesh')
else:
self._oct = MakeOctTree()
theNet().add(self._oct)
self._octIn = ConnectionPoint(self._oct, 'inGrid')
self._octOut = ConnectionPoint(self._oct, 'outOctTree')
connect(self.geoConnectionPoint(), self._octIn)
else:
if enableCachedOctTrees == True and self._octTreeFileExists == True:
# no reconnect necessary, if using disk-cached octtree
pass
else:
# reconnect OctTree
theNet().disconnectAllFromModulePort(self._oct, 'inGrid')
connect(self.geoConnectionPoint(), self._octIn)
def _initOct(self):
self._initGeo()
if self._oct==None:
# create or use disk-cached octtrees
if enableCachedOctTrees == True and self._dim == 3:
basename, extension = os.path.splitext(self._part.filename)
self._octTreeFileName = basename + ".octtree" + extension
print("self._octTreeFileName = ", self._octTreeFileName)
if os.path.isfile(self._octTreeFileName) == False:
# create disk-cached octtree
self._octTreeFileExists = False
self._oct = MakeOctTree()
theNet().add(self._oct)
self._octIn = ConnectionPoint( self._oct, 'inGrid' )
self._octOut = ConnectionPoint( self._oct, 'outOctTree' )
connect( self.geoConnectionPoint(), self._octIn )
# connect RWCovise to MakeOctTree
self._octTreeWriter = RWCovise() # writable
theNet().add(self._octTreeWriter)
self._octTreeWriter.set_grid_path(self._octTreeFileName)
connect(self._octOut, ConnectionPoint(self._octTreeWriter, 'mesh_in'))
else:
# use disk-cached octtree
self._octTreeFileExists = True
self._oct = RWCovise()
theNet().add(self._oct)
self._oct.set_grid_path(self._octTreeFileName)
# cached octtrees must never get an input connection (RWCovise!)
self._octIn = None # ConnectionPoint(self._oct, 'mesh_in')
self._octOut = ConnectionPoint(self._oct, 'mesh')
else:
self._oct = MakeOctTree()
theNet().add(self._oct)
self._octIn = ConnectionPoint( self._oct, 'inGrid' )
self._octOut = ConnectionPoint( self._oct, 'outOctTree' )
connect( self.geoConnectionPoint(), self._octIn )
else:
if enableCachedOctTrees == True and self._octTreeFileExists == True:
# no reconnect necessary, if using disk-cached octtree
pass
else:
# reconnect OctTree
theNet().disconnectAllFromModulePort(self._oct, 'inGrid')
connect(self.geoConnectionPoint(), self._octIn)
def _initSample( self, varname, outside ):
if not (varname,outside) in self._sample:
self._sample[(varname,outside)] = Sample()
theNet().add(self._sample[(varname,outside)])
self._bbox[(varname,USER_DEFINED)] = Box()
self._bbox[(varname,MAX_FLT)] = Box()
# connect( Import3DModule.geoConnectionPoint(self), ConnectionPoint(self._sample[(varname,outside)], 'GridIn') )
# connect( Import3DModule.dataConnectionPoint(self, varname), ConnectionPoint(self._sample[(varname,outside)], 'DataIn') )
connect( ParentClass3D.geoConnectionPoint(self), ConnectionPoint(self._sample[(varname,outside)], 'GridIn') )
connect( ParentClass3D.dataConnectionPoint(self, varname), ConnectionPoint(self._sample[(varname,outside)], 'DataIn') )
sample = self._sample[(varname,outside)]
sample.set_outside(outside)
if not ParentClass3D.executeOct(self) and not ParentClass3D.executeData(self, varname):
saveExecute(sample)
# reconnect Sample
# print "RECONNECTING 3D SAMPLE"
theNet().disconnectAllFromModulePort(self._sample[(varname,outside)], 'GridIn')
theNet().disconnectAllFromModulePort(self._sample[(varname,outside)], 'DataIn')
connect( ParentClass3D.geoConnectionPoint(self), ConnectionPoint(self._sample[(varname,outside)], 'GridIn') )
connect( ParentClass3D.dataConnectionPoint(self, varname), ConnectionPoint(self._sample[(varname,outside)], 'DataIn') )
def __init(self):
""" start COVISE ReadCAD Module """
if self.__readCad==None :
self.__readCad = ReadCAD()
theNet().add(self.__readCad)
self.__readCadPolyOut = ConnectionPoint( self.__readCad, 'mesh' )
self.__readCadNormalsOut = ConnectionPoint( self.__readCad, 'Normals' )
self.__readCadColorsOut = ConnectionPoint( self.__readCad, 'colorOut' )
self.__readCad.set_catia_server('obie')
self.__readCad.set_catia_server_port('7000')
self.__readCad.set_partIndex(self.__index)
self.__readCad.set_file_path( self.__filename )
self.__collect = Collect()
theNet().add(self.__collect)
connect( self.__readCadPolyOut, ConnectionPoint(self.__collect, 'GridIn0') )
connect( self.__readCadNormalsOut, ConnectionPoint(self.__collect, 'DataIn1' ) )
connect( self.__readCadColorsOut, ConnectionPoint(self.__collect, 'DataIn0' ) )
self.__connectGeoOut = ConnectionPoint(self.__collect, 'GeometryOut0' )
def _initSample(self, varname=None, outside=USER_DEFINED):
if self._sample==None:
self._sample = Sample()
theNet().add(self._sample)
# connect( Import2DModule.geoConnectionPoint(self), ConnectionPoint(self._sample, 'GridIn') )
connect( ParentClass2D.geoConnectionPoint(self), ConnectionPoint(self._sample, 'GridIn') )
self._showgrid = ShowGrid()
theNet().add(self._showgrid)
connect( ConnectionPoint(self._sample, 'GridOut'), ConnectionPoint(self._showgrid, 'meshIn') )
sample = self._sample
if not ParentClass2D.executeOct(self) and not ParentClass2D.executeData(self, varname):
saveExecute(sample)
# reconnect Sample
# print "RECONNECTING 2D SAMPLE"
theNet().disconnectAllFromModulePort(self._sample, 'GridIn')
connect( ParentClass2D.geoConnectionPoint(self), ConnectionPoint(self._sample, 'GridIn') )
def setReductionFactor(self, rf, execute=True):
self.__reductionFactor = rf
if rf == 1 and self.__reduceSetModules == []:
return
if rf < 0:
timesteps = self.getNumTimeSteps()
self.__reductionFactor = timesteps / 2
self.__needExecute = True
# create new modules if necessary
if self.__reduceSetModules == []:
numNeededReduceSetModules = 1
numConnectedVariables = 1 # 1, so data variable connecting will start at port 'input_1' ('input_0' is geometry)
# create initial module
self.__reduceSetModules.append(ReduceSetModule())
# connect geometry
connect( ParentClass.geoConnectionPoint(self), self.__reduceSetModules[0].geoInConnectionPoint() )
# connect data
for name in self._dataFileNames:
# TODO: should be made unnecessary
self.executeData(name)
portNum = numConnectedVariables % 8
if len(self.__reduceSetModules) < numNeededReduceSetModules:
self.__reduceSetModules.append(ReduceSetModule())
# theNet().disconnectAllFromModulePort(ParentClass.dataConnectionPoint(self, name).module, ParentClass.dataConnectionPoint(self, name).port)
if portNum == 0:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data0OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data0InConnectionPoint())
elif portNum == 1:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data1OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data1InConnectionPoint())
elif portNum == 2:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data2OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data2InConnectionPoint())
elif portNum == 3:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data3OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data3InConnectionPoint())
elif portNum == 4:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data4OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data4InConnectionPoint())
elif portNum == 5:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data5OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data5InConnectionPoint())
elif portNum == 6:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data6OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data6InConnectionPoint())
elif portNum == 7:
self.__dataConnectionPoints[name] = self.__reduceSetModules[numNeededReduceSetModules-1].data7OutConnectionPoint()
connect(ParentClass.dataConnectionPoint(self, name), self.__reduceSetModules[numNeededReduceSetModules-1].data7InConnectionPoint())
numConnectedVariables = numConnectedVariables + 1
if numConnectedVariables % 8 == 0:
numNeededReduceSetModules = numNeededReduceSetModules + 1
for rS in self.__reduceSetModules:
rS.setReductionFactor(self.__reductionFactor)
if execute:
for rS in self.__reduceSetModules:
rS.execute()
self.__needExecute = False
return True
return False
def setTranslation(self, x,y,z, execute=True):
self.__transX = x
self.__transY = y
self.__transZ = z
# create new module if necessary
if self.__translation == None:
self.__translation = TransformModule()
if self.__rotation == None:
connect(self.iGroupModule.geoConnectionPoint(), self.__translation.geoInConnectionPoint())
else:
connect(self.__rotation.geoOutConnectionPoint(), self.__translation.geoInConnectionPoint())
connect(self.__rotation.data0OutConnectionPoint(), self.__translation.data0InConnectionPoint())
connect(self.__rotation.data1OutConnectionPoint(), self.__translation.data1InConnectionPoint())
connect(self.__rotation.data2OutConnectionPoint(), self.__translation.data2InConnectionPoint())
connect(self.__rotation.data3OutConnectionPoint(), self.__translation.data3InConnectionPoint())
self.__translation.setTranslation(self.__transX, self.__transY, self.__transZ)
if execute:
r.execute()
return True
return False
def dataConnectionPoint(self, varname):
if not varname in self._assembleUsg:
self._initAssemble(varname)
connect( ImportGroupModule.geoConnectionPoint(self), self._assembleUsg[varname].geoInConnectionPoint() )
connect( ImportGroupModule.dataConnectionPoint(self,varname), self._assembleUsg[varname].dataInConnectionPoint() )
return self._assembleUsg[varname].dataOutConnectionPoint()
def octConnectionPoint( self ):
self._initOct()
self._octOut = ConnectionPoint( self._oct, 'outOctTree' )
connect( self.geoConnectionPoint(), ConnectionPoint( self._oct, 'inGrid' ) )
return self._octOut
def __initData(self, varName):
if not varName in self.__needExecuteData.keys():
self.__needExecuteData[varName] = False
if self.__rotAngle == 0 and self.__rotations == []:
pass
else:
if (self._dataVariableType[varName] != SCALARVARIABLE) and (
not varName in self.__dataInConnectionPoints.keys()) and (
self.__rotAngle != 0):
portNum = self.__numConnectedVectorVariables % 4
if len(self.__rotations) < self.__numNeededRotationModules:
self.__rotations.append(TransformModule())
self.__rotations[self.__numNeededRotationModules -
1].setRotation(self.__rotAngle,
self.__rotX, self.__rotY,
self.__rotZ)
self.__needExecuteData[varName] = True
# verbinde notwendige geometrie
connect(
ParentClass.geoConnectionPoint(self),
self.__rotations[self.__numNeededRotationModules -
1].geoInConnectionPoint())
if portNum == 0:
self.__dataConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data0OutConnectionPoint()
self.__dataInConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data0InConnectionPoint()
elif portNum == 1:
self.__dataConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data1OutConnectionPoint()
self.__dataInConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data1InConnectionPoint()
elif portNum == 2:
self.__dataConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data2OutConnectionPoint()
self.__dataInConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data2InConnectionPoint()
elif portNum == 3:
self.__dataConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data3OutConnectionPoint()
self.__dataInConnectionPoints[varName] = self.__rotations[
self.__numNeededRotationModules -
1].data3InConnectionPoint()
self.__numConnectedVectorVariables = self.__numConnectedVectorVariables + 1
if self.__numConnectedVectorVariables % 4 == 0:
self.__numNeededRotationModules = self.__numNeededRotationModules + 1
if self.__translation == None:
pass
else:
theNet().disconnectAllFromModulePort(
self.__translation.geoInConnectionPoint().module,
self.__translation.geoInConnectionPoint().port)
connect(self.__rotations[0].geoOutConnectionPoint(),
self.__translation.geoInConnectionPoint())
def _init(self, negMsgHandler, sampleType=None):
'''called from _update
if module exists connect output of it to COVER
'''
if not sampleType == None:
self._sampleType = sampleType
if self._module == None and hasattr(
self, 'importModule') and self.__firstTime:
self.__firstTime = False
self._module = self._moduleName()
theNet().add(self._module)
# need to execute blockcollect for geo
if type(self.importModule
) == ImportGroupManager.ImportGroup3DModule:
self.importModule.executeGeo()
for geoInput in self._geoInputNames:
connect(self.importModule.geoConnectionPoint(),
ConnectionPoint(self._module, geoInput))
if self.__createOcttree:
if len(self._octtreeInputNames) > 0:
for octtree in self._octtreeInputNames:
connect(self.importModule.octTreeConnectionPoint(),
ConnectionPoint(self._module, octtree))
self.importModule.executeOct()
if (len(self._dataInputNames) > 0):
if hasattr(
self.params, 'variable'
) and self.params.variable and self.params.variable != 'Select a variable' and self.params.variable != 'unset':
for dataInput in self._dataInputNames:
connect(
self.importModule.dataConnectionPoint(
self.params.variable),
ConnectionPoint(self._module, dataInput))
if len(self._geoSampleNames
) > 0 and not self.importModule.getIsTransient():
if hasattr(
self.params, 'variable'
) and self.params.variable and self.params.variable != 'Select a variable' and self.params.variable != 'unset':
assert self.params.variable != 'Select a variable'
self.importModule.executeSampleData(
self.params.variable, None, self._sampleType)
for geoSample in self._geoSampleNames:
connect(
self.importModule.geoSampleConnectionPoint(
self.params.variable, self._sampleType),
ConnectionPoint(self._module, geoSample))
if len(self._dataSampleNames
) > 0 and not self.importModule.getIsTransient():
if hasattr(
self.params, 'variable'
) and self.params.variable and self.params.variable != 'Select a variable' and self.params.variable != 'unset':
assert self.params.variable != 'Select a variable'
for dataSample in self._dataSampleNames:
connect(
self.importModule.dataSampleConnectionPoint(
self.params.variable, self._sampleType),
ConnectionPoint(self._module, dataSample))
self.reloadBBox()
# optionally connect to COVER
if not covise.coConfigIsOn("vr-prepare.InvisibleConnectToRenderer",
True):
# only connect to COVER if this visualizer really is visible
if self.params.isVisible and not self.__connectedToCOVER:
VisItem.connectToCover(self, self)
self.__connectedToCOVER = True
else:
VisItem.connectToCover(self, self)
self.__connectedToCOVER = True
# refresh all connections as they might have changed
if self._module != None and hasattr(self, 'importModule'):
for geoInput in self._geoInputNames:
theNet().disconnectAllFromModulePort(
self._module,
geoInput) # remove all connections at the inport
connect(self.importModule.geoConnectionPoint(),
ConnectionPoint(self._module, geoInput))
if self.__createOcttree:
for octtree in self._octtreeInputNames:
theNet().disconnectAllFromModulePort(
self._module,
octtree) # remove all connections at the inport
connect(self.importModule.octTreeConnectionPoint(),
ConnectionPoint(self._module, octtree))
if (len(self._dataInputNames) > 0):
if hasattr(
self.params, 'variable'
) and self.params.variable and self.params.variable != 'Select a variable' and self.params.variable != 'unset':
for dataInput in self._dataInputNames:
theNet().disconnectAllFromModulePort(
self._module, dataInput)
connect(
self.importModule.dataConnectionPoint(
self.params.variable),
ConnectionPoint(self._module, dataInput))
if hasattr(
self.params, 'variable'
) and self.params.variable and self.params.variable != 'Select a variable' and self.params.variable != 'unset':
if self.params.variable != 'Select a variable' and not self.importModule.getIsTransient(
):
for geoSample in self._geoSampleNames:
theNet().disconnectAllFromModulePort(
self._module, geoSample)
connect(
self.importModule.geoSampleConnectionPoint(
self.params.variable, self._sampleType),
ConnectionPoint(self._module, geoSample))
if hasattr(
self.params, 'variable'
) and self.params.variable and self.params.variable != 'Select a variable' and self.params.variable != 'unset':
if self.params.variable != 'Select a variable' and not self.importModule.getIsTransient(
):
for dataSample in self._dataSampleNames:
theNet().disconnectAllFromModulePort(
self._module, dataSample)
connect(
self.importModule.dataSampleConnectionPoint(
self.params.variable, self._sampleType),
ConnectionPoint(self._module, dataSample))
self.reloadBBox()
# connect to COVER if visible and wasnt done initially
if self.params.isVisible and not self.__connectedToCOVER:
VisItem.connectToCover(self, self)
self.__connectedToCOVER = True
def octConnectionPoint(self):
self._initOct()
self._octOut = ConnectionPoint(self._oct, 'outOctTree')
connect(self.geoConnectionPoint(),
ConnectionPoint(self._oct, 'inGrid'))
return self._octOut