def three_points_plane_command():
""" This command use the selected object(s) to try to build a
ThreePointsPlane feature object.
"""
m_sel, m_act_doc = getSel(WF.verbose())
points_from = ["Points", "Curves", "Objects"]
try:
number_of_vertexes, vertex_list = m_sel.get_pointsWithNames(
get_from=points_from)
if number_of_vertexes < 3:
raise Exception(M_EXCEPTION_MSG)
try:
m_main_dir = "WorkPlanes_P"
m_sub_dir = "Set000"
m_group = createFolders(str(m_main_dir))
# Create a sub group if needed
if number_of_vertexes > 6:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
# Case of only 3 points
if number_of_vertexes == 3:
buildFromThreePoints(M_MACRO, m_group, vertex_list,
M_PLANE_EXT)
else:
raise Exception(M_EXCEPTION_MSG)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
except Exception as err:
printError_msgWithTimer(err.args[0], title=M_MACRO)
App.ActiveDocument.commitTransaction()
App.activeDocument().recompute()
def along_line_point_command():
""" This command use the selected object(s) to try to build a
AlongLinePoint feature object.
"""
m_sel, m_act_doc = getSel(WF.verbose())
edges_from = ["Segments", "Curves"]
points_from = ["Points"]
try:
if m_sel.numberOfEntities == 1:
number_of_edges, edge_list = m_sel.get_segmentsWithNames(
get_from=edges_from)
else:
number_of_edges, edge_list = m_sel.get_segmentsWithNames(
get_from=edges_from)
number_of_vertexes, vertex_list = m_sel.get_pointsWithNames(
get_from=points_from)
if number_of_edges == 0:
raise Exception(M_EXCEPTION_MSG)
else:
if number_of_edges == 1 and number_of_vertexes == 0:
raise Exception(M_EXCEPTION_MSG)
m_main_dir = "WorkPoints_P"
m_sub_dir = "Set000"
m_group = createFolders(str(m_main_dir))
m_distance = getDistanceLinePoint()
# Selection of : One Edge and One or several Point(s)
if number_of_edges == 1 and number_of_vertexes > 0:
try:
# Create a sub group if needed
if number_of_vertexes > 1:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
edge = edge_list[0]
for j in range(number_of_vertexes):
point = vertex_list[j]
buildFromEdgeAndPoint(M_MACRO,
m_group,
edge, point, m_distance)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
# Selection of : One Edge and One or several Edge(s)
elif number_of_edges > 1 and number_of_vertexes == 0:
try:
# Create a sub group if needed
if number_of_edges > 2:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
edge = edge_list[0]
for other_edge in edge_list[1:]:
buildFromEdges(M_MACRO,
m_group,
edge, other_edge, m_distance)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
# Selection of : several Edges and Points with
# same number of Edges and Points
elif number_of_edges > 1 and number_of_vertexes == number_of_edges:
try:
# Create a sub group if needed
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
for edge, point in zip(edge_list, vertex_list):
buildFromEdgeAndPoint(M_MACRO,
m_group,
edge, point, m_distance)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
else:
printError_msg("Bad selection !", title=M_MACRO)
except Exception as err:
printError_msgWithTimer(err.args[0], title=M_MACRO)
App.ActiveDocument.commitTransaction()
App.activeDocument().recompute()
def center_line_point_command():
""" This command use the selected object(s) to try to build a
CenterLinePoint feature object.
"""
m_sel, m_act_doc = getSel(WF.verbose())
edges_from = ["Segments", "Curves", "Planes", "Shells", "Objects"]
points_from = ["Points"]
try:
number_of_edges, edge_list = m_sel.get_segmentsWithNames(
get_from=edges_from)
# number_of_edges, edge_list = m_sel.get_segmentsWithIndex(getfrom=edges_from)
if number_of_edges == 0:
# Try to get Edges from points
number_of_vertexes, vertex_list = m_sel.get_pointsWithNames(
get_from=points_from)
if number_of_edges == 0 and number_of_vertexes < 2:
raise Exception(M_EXCEPTION_MSG)
try:
if WF.verbose():
print_msg("Location = " + str(M_LOCATION))
m_main_dir = "WorkPoints_P"
m_sub_dir = "Set000"
m_group = createFolders(str(m_main_dir))
# From Edges
if number_of_edges != 0:
# Create a sub group if needed
if number_of_edges > 1 or M_LOCATION != "Single":
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
for i in range(number_of_edges):
m_edge = edge_list[i]
# Check if first point and last point of edge is not the
# same
vector_a = m_edge[0].Shape.Edges[0].Vertexes[0].Point
vector_b = m_edge[0].Shape.Edges[0].Vertexes[-1].Point
if isEqualVectors(vector_a, vector_b):
continue
if M_LOCATION == "Single":
buildFromEdge(M_MACRO,
m_group,
m_edge, M_NUMBERLINEPART, M_INDEXPART)
else:
for m_i_part in range(M_NUMBERLINEPART + 1):
buildFromEdge(M_MACRO,
m_group,
m_edge, M_NUMBERLINEPART, m_i_part)
# From Vertexes
else:
if number_of_vertexes > 2:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
# Even number of vertexes
if number_of_vertexes % 2 == 0:
if WF.verbose():
print_msg("Even number of points")
if number_of_vertexes == 2:
vertex1 = vertex_list[0]
vertex2 = vertex_list[1]
# point1 = vertex1[0].Shape.Vertexes[0].Point
# point2 = vertex2[0].Shape.Vertexes[0].Point
# if isEqualVectors(point1, point2):
# return
if M_LOCATION == "Single":
buildFromPoints(M_MACRO,
m_group,
(vertex1, vertex2),
M_NUMBERLINEPART, M_INDEXPART)
else:
for m_i_part in range(M_NUMBERLINEPART + 1):
buildFromPoints(M_MACRO,
m_group,
(vertex1, vertex2),
M_NUMBERLINEPART, m_i_part)
else:
for i in range(0, number_of_vertexes - 2, 2):
vertex1 = vertex_list[i]
vertex2 = vertex_list[i + 1]
# point1 = vertex1[0].Shape.Vertexes[0].Point
# point2 = vertex2[0].Shape.Vertexes[0].Point
# if isEqualVectors(point1, point2):
# continue
if M_LOCATION == "Single":
buildFromPoints(M_MACRO,
m_group,
(vertex1, vertex2),
M_NUMBERLINEPART, M_INDEXPART)
else:
for m_i_part in range(M_NUMBERLINEPART + 1):
buildFromPoints(M_MACRO,
m_group,
(vertex1, vertex2),
M_NUMBERLINEPART, m_i_part)
# Odd number of vertexes
else:
if WF.verbose():
print_msg("Odd number of points")
for i in range(number_of_vertexes - 1):
vertex1 = vertex_list[i]
vertex2 = vertex_list[i + 1]
if M_LOCATION == "Single":
buildFromPoints(M_MACRO,
m_group,
(vertex1, vertex2),
M_NUMBERLINEPART, M_INDEXPART)
else:
for m_i_part in range(M_NUMBERLINEPART + 1):
buildFromPoints(M_MACRO,
m_group,
(vertex1, vertex2),
M_NUMBERLINEPART, m_i_part)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
except Exception as err:
printError_msgWithTimer(err.args[0], title=M_MACRO)
App.ActiveDocument.commitTransaction()
App.activeDocument().recompute()
def n_points_line_command():
""" This command use the selected object(s) to try to build a
NPointsLine feature object.
"""
m_sel, m_act_doc = getSel(WF.verbose())
points_from = ["Points", "Curves", "Objects"]
try:
number_of_vertexes, vertex_list = m_sel.get_pointsWithNames(
get_from=points_from)
if number_of_vertexes < 2:
raise Exception(M_EXCEPTION_MSG)
try:
m_main_dir = "WorkAxis_P"
m_sub_dir = "Set000"
m_group = createFolders(str(m_main_dir))
# Create a sub group if needed
if M_SVD_FLAG:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
points = []
# Case of only 2 points
if number_of_vertexes == 2:
if WF.verbose():
print_msg("Process only 2 points")
vertex1 = vertex_list[0]
vertex2 = vertex_list[1]
points.append(vertex1)
points.append(vertex2)
if WF.verbose():
print_msg("vertex1 = " + str(vertex1))
print_msg("vertex2 = " + str(vertex2))
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '1'
selfobj.Proxy.execute(selfobj)
if M_SVD_FLAG:
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '2'
selfobj.Proxy.execute(selfobj)
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '3'
selfobj.Proxy.execute(selfobj)
# Case of more than 2 points
else:
if WF.verbose():
print_msg("Process more than 2 points")
for i in range(number_of_vertexes):
vertex = vertex_list[i]
points.append(vertex)
if WF.verbose():
print_msg("vertex = " + str(vertex))
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '1'
selfobj.Proxy.execute(selfobj)
if M_SVD_FLAG:
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '2'
selfobj.Proxy.execute(selfobj)
App.ActiveDocument.openTransaction(M_MACRO)
selfobj, m_inst = makeNPointsLineFeature(m_group)
m_inst.addSubobjects(selfobj, points)
selfobj.VectorIndex = '3'
selfobj.Proxy.execute(selfobj)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
except Exception as err:
printError_msgWithTimer(err.args[0], title=M_MACRO)
App.ActiveDocument.commitTransaction()
App.activeDocument().recompute()
def two_points_line_command():
""" This command use the selected object(s) to try to build a
TwoPointsLine feature object.
"""
m_sel, m_act_doc = getSel(WF.verbose())
points_from = ["Points", "Curves", "Objects"]
try:
number_of_vertexes, vertex_list = m_sel.get_pointsWithNames(
get_from=points_from)
if number_of_vertexes < 2:
raise Exception(M_EXCEPTION_MSG)
try:
m_main_dir = "WorkAxis_P"
m_sub_dir = "Set000"
m_group = createFolders(str(m_main_dir))
# Create a sub group if needed
if number_of_vertexes > 2:
m_group = createSubGroup(m_act_doc, m_main_dir, m_sub_dir)
# Case of only 2 points
if number_of_vertexes == 2:
if WF.verbose():
print_msg("Process only 2 points")
vertex1 = vertex_list[0]
vertex2 = vertex_list[1]
buildFromPoints(M_MACRO, m_group, vertex1, vertex2, M_LINE_EXT)
# Case of more than 2 points
else:
if M_BYPAIR:
if WF.verbose():
print_msg("Process points by pair")
# even
if (number_of_vertexes % 2 == 0):
if WF.verbose():
print_msg("Even number of points")
for i in range(0, number_of_vertexes - 1, 2):
vertex1 = vertex_list[i]
vertex2 = vertex_list[i + 1]
buildFromPoints(M_MACRO, m_group, vertex1, vertex2,
M_LINE_EXT)
# odd
else:
if WF.verbose():
print_msg("Odd number of points")
for i in range(0, number_of_vertexes - 2, 2):
vertex1 = vertex_list[i]
vertex2 = vertex_list[i + 1]
buildFromPoints(M_MACRO, m_group, vertex1, vertex2,
M_LINE_EXT)
if WF.closePolyline():
vertex1 = vertex_list[-1]
vertex2 = vertex_list[0]
buildFromPoints(M_MACRO, m_group, vertex1, vertex2,
M_LINE_EXT)
else:
if WF.verbose():
print_msg("Process points as list")
for i in range(number_of_vertexes - 1):
vertex1 = vertex_list[i]
vertex2 = vertex_list[i + 1]
buildFromPoints(M_MACRO, m_group, vertex1, vertex2,
M_LINE_EXT)
if WF.closePolyline():
vertex1 = vertex_list[-1]
vertex2 = vertex_list[0]
buildFromPoints(M_MACRO, m_group, vertex1, vertex2,
M_LINE_EXT)
except Exception as err:
printError_msg(err.args[0], title=M_MACRO)
except Exception as err:
printError_msgWithTimer(err.args[0], title=M_MACRO)
App.ActiveDocument.commitTransaction()
App.activeDocument().recompute()