def identiconize(address):
size = 48
# If you include another identicon library, please generate an
# example identicon with the following md5 hash:
# 3fd4bf901b9d4ea1394f0fb358725b28
try:
identicon_lib = shared.config.get('bitmessagesettings', 'identiconlib')
except:
# default to qidenticon_two_x
identicon_lib = 'qidenticon_two_x'
# As an 'identiconsuffix' you could put "@bitmessge.ch" or "@bm.addr" to make it compatible with other identicon generators. (Note however, that E-Mail programs might convert the BM-address to lowercase first.)
# It can be used as a pseudo-password to salt the generation of the identicons to decrease the risk
# of attacks where someone creates an address to mimic someone else's identicon.
identiconsuffix = shared.config.get('bitmessagesettings', 'identiconsuffix')
if not shared.config.getboolean('bitmessagesettings', 'useidenticons'):
idcon = QtGui.QIcon()
return idcon
if (identicon_lib[:len('qidenticon')] == 'qidenticon'):
# print identicon_lib
# originally by:
# :Author:Shin Adachi <*****@*****.**>
# Licesensed under FreeBSD License.
# stripped from PIL and uses QT instead (by sendiulo, same license)
import qidenticon
hash = hashlib.md5(addBMIfNotPresent(address)+identiconsuffix).hexdigest()
use_two_colors = (identicon_lib[:len('qidenticon_two')] == 'qidenticon_two')
opacity = int(not((identicon_lib == 'qidenticon_x') | (identicon_lib == 'qidenticon_two_x') | (identicon_lib == 'qidenticon_b') | (identicon_lib == 'qidenticon_two_b')))*255
penwidth = 0
image = qidenticon.render_identicon(int(hash, 16), size, use_two_colors, opacity, penwidth)
# filename = './images/identicons/'+hash+'.png'
# image.save(filename)
idcon = QtGui.QIcon()
idcon.addPixmap(image, QtGui.QIcon.Normal, QtGui.QIcon.Off)
return idcon
elif identicon_lib == 'pydenticon':
# print identicon_lib
# Here you could load pydenticon.py (just put it in the "src" folder of your Bitmessage source)
from pydenticon import Pydenticon
# It is not included in the source, because it is licensed under GPLv3
# GPLv3 is a copyleft license that would influence our licensing
# Find the source here: http://boottunes.googlecode.com/svn-history/r302/trunk/src/pydenticon.py
# note that it requires PIL to be installed: http://www.pythonware.com/products/pil/
idcon_render = Pydenticon(addBMIfNotPresent(address)+identiconsuffix, size*3)
rendering = idcon_render._render()
data = rendering.convert("RGBA").tostring("raw", "RGBA")
qim = QImage(data, size, size, QImage.Format_ARGB32)
pix = QPixmap.fromImage(qim)
idcon = QtGui.QIcon()
idcon.addPixmap(pix, QtGui.QIcon.Normal, QtGui.QIcon.Off)
return idcon
def sendMessage(self, fromAddress, toAddress, subject, message):
'''Send a Message to a given Address or Channel
Usage: api.sendBroadcast(OwnAddress, TargetAddress, Subject, Message)'''
# Hardcoded Encoding Type, no othe supported jet
encodingType = 2
status, addressVersionNumber, streamNumber, toRipe = addresses.decodeAddress(
toAddress)
if status != 'success':
with bitmessagemain.shared.printLock:
print 'ToAddress Error: %s , %s' % (toAddress, status)
return (toAddress, status)
status, addressVersionNumber, streamNumber, fromRipe = addresses.decodeAddress(
fromAddress)
if status != 'success':
with bitmessagemain.shared.printLock:
print 'fromAddress Error: %s , %s' % (fromAddress, status)
return (fromAddress, status)
toAddress = addresses.addBMIfNotPresent(toAddress)
fromAddress = addresses.addBMIfNotPresent(fromAddress)
try:
fromAddressEnabled = BMConfigParser().getboolean(
fromAddress, 'enabled')
except:
return (fromAddress, 'fromAddressNotPresentError')
if not fromAddressEnabled:
return (fromAddress, 'fromAddressDisabledError')
stealthLevel = BMConfigParser().safeGetInt('bitmessagesettings',
'ackstealthlevel')
ackdata = genAckPayload(streamNumber, stealthLevel)
TTL = 4 * 24 * 60 * 60
t = (
'',
toAddress,
toRipe,
fromAddress,
subject,
message,
ackdata,
int(time.time()), # sentTime (this won't change)
int(time.time()), # lastActionTime
0,
'msgqueued',
0,
'sent',
2,
TTL)
helper_sent.insert(t)
queues.workerQueue.put(('sendmessage', toAddress))
return ackdata.encode('hex')
def HandleJoinChan(self, params):
if len(params) < 2:
raise APIError(0, 'I need two parameters.')
elif len(params) == 2:
passphrase, suppliedAddress = params
passphrase = self._decode(passphrase, "base64")
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
# It would be nice to make the label the passphrase but it is
# possible that the passphrase contains non-utf-8 characters.
try:
unicode(passphrase, 'utf-8')
label = str_chan + ' ' + passphrase
except:
label = str_chan + ' ' + repr(passphrase)
status, addressVersionNumber, streamNumber, toRipe = \
self._verifyAddress(suppliedAddress)
suppliedAddress = addBMIfNotPresent(suppliedAddress)
queues.apiAddressGeneratorReturnQueue.queue.clear()
queues.addressGeneratorQueue.put(
('joinChan', suppliedAddress, label, passphrase, True))
addressGeneratorReturnValue = \
queues.apiAddressGeneratorReturnQueue.get()
if addressGeneratorReturnValue[0] == \
'chan name does not match address':
raise APIError(18, 'Chan name does not match address.')
if len(addressGeneratorReturnValue) == 0:
raise APIError(24, 'Chan address is already present.')
# TODO: this variable is not used to anything
# in case we ever want it for anything.
# createdAddress = addressGeneratorReturnValue[0]
return "success"
def sendBroadcast(self,fromAddress,subject,message):
'''Send a Broadcast to a given Address
Usage: api.sendBroadcast(BmAddress, Subject, Message)'''
#Hardcoded Encoding Type, no othe supported jet
encodingType = 2
status, addressVersionNumber, streamNumber, toRipe = addresses.decodeAddress(fromAddress)
fromAddress = addresses.addBMIfNotPresent(fromAddress)
try:
fromAddressEnabled = bitmessagemain.shared.config.getboolean(fromAddress, 'enabled')
except:
return (fromAddress,'fromAddressNotPresentError')
if not fromAddressEnabled:
return (fromAddress,'fromAddressDisabledError')
ackdata = openssl._OpenSSL.rand(32)
toAddress = '[Broadcast subscribers]'
ripe = ''
t = ('', toAddress, ripe, fromAddress, subject, message, ackdata, int(
time.time()), 'broadcastqueued', 1, 1, 'sent', 2)
helper_sent.insert(t)
toLabel = '[Broadcast subscribers]'
bitmessagemain.shared.workerQueue.put(('sendbroadcast', ''))
return ackdata.encode('hex')
def HandleAddSubscription(self, params):
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 1:
address, = params
label = ''
if len(params) == 2:
address, label = params
label = self._decode(label, "base64")
try:
unicode(label, 'utf-8')
except:
raise APIError(17, 'Label is not valid UTF-8 data.')
if len(params) > 2:
raise APIError(0, 'I need either 1 or 2 parameters!')
address = addBMIfNotPresent(address)
self._verifyAddress(address)
# First we must check to see if the address is already in the
# subscriptions list.
queryreturn = sqlQuery("SELECT * FROM subscriptions WHERE address=?",
address)
if queryreturn != []:
raise APIError(16, 'You are already subscribed to that address.')
sqlExecute("INSERT INTO subscriptions VALUES (?,?,?)", label, address,
True)
shared.reloadBroadcastSendersForWhichImWatching()
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Added subscription.'
def accept(self):
"""Proceed in joining the chan"""
self.timer.stop()
self.hide()
apiAddressGeneratorReturnQueue.queue.clear()
if self.chanAddress.text().toUtf8() == "":
addressGeneratorQueue.put(
('createChan', 4, 1,
str_chan + ' ' + str(self.chanPassPhrase.text().toUtf8()),
self.chanPassPhrase.text().toUtf8(), True))
else:
addressGeneratorQueue.put(
('joinChan',
addBMIfNotPresent(self.chanAddress.text().toUtf8()),
str_chan + ' ' + str(self.chanPassPhrase.text().toUtf8()),
self.chanPassPhrase.text().toUtf8(), True))
addressGeneratorReturnValue = apiAddressGeneratorReturnQueue.get(True)
if addressGeneratorReturnValue and addressGeneratorReturnValue[
0] != 'chan name does not match address':
UISignalQueue.put(
('updateStatusBar',
_translate("newchandialog",
"Successfully created / joined chan %1").arg(
unicode(self.chanPassPhrase.text()))))
self.parent.ui.tabWidget.setCurrentIndex(
self.parent.ui.tabWidget.indexOf(self.parent.ui.chans))
self.done(QtGui.QDialog.Accepted)
else:
UISignalQueue.put(('updateStatusBar',
_translate("newchandialog",
"Chan creation / joining failed")))
self.done(QtGui.QDialog.Rejected)
def HandleSendBroadcast(self, params):
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 3:
fromAddress, subject, message = params
encodingType = 2
TTL = 4 * 24 * 60 * 60
elif len(params) == 4:
fromAddress, subject, message, encodingType = params
TTL = 4 * 24 * 60 * 60
elif len(params) == 5:
fromAddress, subject, message, encodingType, TTL = params
if encodingType not in [2, 3]:
raise APIError(6, 'The encoding type must be 2 or 3.')
subject = self._decode(subject, "base64")
message = self._decode(message, "base64")
if len(subject + message) > (2**18 - 500):
raise APIError(27, 'Message is too long.')
if TTL < 60 * 60:
TTL = 60 * 60
if TTL > 28 * 24 * 60 * 60:
TTL = 28 * 24 * 60 * 60
fromAddress = addBMIfNotPresent(fromAddress)
self._verifyAddress(fromAddress)
try:
BMConfigParser().getboolean(fromAddress, 'enabled')
except:
raise APIError(
13, 'could not find your fromAddress in the keys.dat file.')
streamNumber = decodeAddress(fromAddress)[2]
ackdata = genAckPayload(streamNumber, 0)
toAddress = '[Broadcast subscribers]'
ripe = ''
t = (
'',
toAddress,
ripe,
fromAddress,
subject,
message,
ackdata,
int(time.time()), # sentTime (this doesn't change)
int(time.time()), # lastActionTime
0,
'broadcastqueued',
0,
'sent',
2,
TTL)
helper_sent.insert(t)
toLabel = '[Broadcast subscribers]'
queues.UISignalQueue.put(
('displayNewSentMessage', (toAddress, toLabel, fromAddress,
subject, message, ackdata)))
queues.workerQueue.put(('sendbroadcast', ''))
return hexlify(ackdata)
def deleteSubscription(self,address):
'''Delete a Subscription
Usage: api.deleteSubscription(bmaddress)'''
address = addresses.addBMIfNotPresent(address)
bitmessagemain.shared.sqlExecute('''DELETE FROM subscriptions WHERE address=?''',address)
bitmessagemain.shared.reloadBroadcastSendersForWhichImWatching()
return True
def HandleDeleteSubscription(self, params):
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
address, = params
address = addBMIfNotPresent(address)
sqlExecute('''DELETE FROM subscriptions WHERE address=?''', address)
shared.reloadBroadcastSendersForWhichImWatching()
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Deleted subscription if it existed.'
def HandleDeleteAddressBookEntry(self, params):
if len(params) != 1:
raise APIError(0, "I need an address")
address, = params
address = addBMIfNotPresent(address)
self._verifyAddress(address)
sqlExecute('DELETE FROM addressbook WHERE address=?', address)
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderMessagelistToLabels', ''))
queues.UISignalQueue.put(('rerenderAddressBook', ''))
return "Deleted address book entry for %s if it existed" % address
def accept(self):
if self.valid:
self.data = (addBMIfNotPresent(str(self.lineEditAddress.text())),
str(self.lineEditLabel.text().toUtf8()))
else:
queues.UISignalQueue.put(
('updateStatusBar',
_translate(
"MainWindow",
"The address you entered was invalid. Ignoring it.")))
super(AddressDataDialog, self).accept()
def click_pushButtonAddBlacklist(self):
self.NewBlacklistDialogInstance = AddAddressDialog(self)
if self.NewBlacklistDialogInstance.exec_():
if self.NewBlacklistDialogInstance.labelAddressCheck.text() == \
_translate("MainWindow", "Address is valid."):
address = addBMIfNotPresent(
str(self.NewBlacklistDialogInstance.lineEditAddress.text())
)
# First we must check to see if the address is already in the
# address book. The user cannot add it again or else it will
# cause problems when updating and deleting the entry.
t = (address, )
if BMConfigParser().get('bitmessagesettings',
'blackwhitelist') == 'black':
sql = '''select * from blacklist where address=?'''
else:
sql = '''select * from whitelist where address=?'''
queryreturn = sqlQuery(sql, *t)
if queryreturn == []:
self.tableWidgetBlacklist.setSortingEnabled(False)
self.tableWidgetBlacklist.insertRow(0)
newItem = QtGui.QTableWidgetItem(
unicode(
self.NewBlacklistDialogInstance.lineEditLabel.text(
).toUtf8(), 'utf-8'))
newItem.setIcon(avatarize(address))
self.tableWidgetBlacklist.setItem(0, 0, newItem)
newItem = QtGui.QTableWidgetItem(address)
newItem.setFlags(QtCore.Qt.ItemIsSelectable
| QtCore.Qt.ItemIsEnabled)
self.tableWidgetBlacklist.setItem(0, 1, newItem)
self.tableWidgetBlacklist.setSortingEnabled(True)
t = (str(self.NewBlacklistDialogInstance.lineEditLabel.
text().toUtf8()), address, True)
if BMConfigParser().get('bitmessagesettings',
'blackwhitelist') == 'black':
sql = '''INSERT INTO blacklist VALUES (?,?,?)'''
else:
sql = '''INSERT INTO whitelist VALUES (?,?,?)'''
sqlExecute(sql, *t)
else:
UISignalQueue.put(
('updateStatusBar',
_translate(
"MainWindow",
"Error: You cannot add the same address to your"
" list twice. Perhaps rename the existing one"
" if you want.")))
else:
UISignalQueue.put(
('updateStatusBar',
_translate(
"MainWindow",
"The address you entered was invalid. Ignoring it.")))
def accept(self):
if self.valid:
self.data = (
addBMIfNotPresent(str(self.lineEditAddress.text())),
str(self.lineEditLabel.text().toUtf8())
)
else:
queues.UISignalQueue.put(('updateStatusBar', _translate(
"MainWindow",
"The address you entered was invalid. Ignoring it."
)))
super(AddressDataDialog, self).accept()
def send(self):
fromAddress = "BM-2cXxMHUdyqGESttuTwzQUKCFLZNfVjoon2"
toAddress = "BM-2cWF9TNuK5zfgnB6z4F7JJ5KizBRivDevp"
message = self.ids.user_input.text
subject = 'Test'
print("$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$4")
print("################################################################")
encoding = 3
print("message: ", self.ids.user_input.text)
sendMessageToPeople = True
if sendMessageToPeople:
if toAddress != '':
status, addressVersionNumber, streamNumber, ripe = decodeAddress(toAddress)
if status == 'success':
toAddress = addBMIfNotPresent(toAddress)
if addressVersionNumber > 4 or addressVersionNumber <= 1:
print("addressVersionNumber > 4 or addressVersionNumber <= 1")
if streamNumber > 1 or streamNumber == 0:
print("streamNumber > 1 or streamNumber == 0")
if statusIconColor == 'red':
print("shared.statusIconColor == 'red'")
stealthLevel = BMConfigParser().safeGetInt(
'bitmessagesettings', 'ackstealthlevel')
ackdata = genAckPayload(streamNumber, stealthLevel)
t = ()
sqlLookup = sqlThread()
sqlLookup.daemon = False # DON'T close the main program even if there are threads left. The closeEvent should command this thread to exit gracefully.
sqlLookup.start()
sqlExecute(
'''INSERT INTO sent VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)''',
'',
toAddress,
ripe,
fromAddress,
subject,
message,
ackdata,
int(time.time()), # sentTime (this will never change)
int(time.time()), # lastActionTime
0, # sleepTill time. This will get set when the POW gets done.
'msgqueued',
0, # retryNumber
'sent', # folder
encoding, # encodingtype
BMConfigParser().getint('bitmessagesettings', 'ttl')
)
print("sqlExecute successfully #######################")
aa = App.get_running_app()
aa.Exit()
def deleteAddress(self,address):
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(address)
address = addresses.addBMIfNotPresent(address)
if not bitmessagemain.shared.config.has_section(address):
raise APIError('Could not find this address in your keys.dat file.')
bitmessagemain.shared.config.remove_section(address)
with open(bitmessagemain.shared.appdata + 'keys.dat', 'wb') as configfile:
bitmessagemain.shared.config.write(configfile)
bitmessagemain.shared.reloadMyAddressHashes()
return True
def sendMessage(self, fromAddress, toAddress, subject, message):
'''Send a Message to a given Address or Channel
Usage: api.sendBroadcast(OwnAddress, TargetAddress, Subject, Message)'''
#Hardcoded Encoding Type, no othe supported jet
encodingType = 2
status, addressVersionNumber, streamNumber, toRipe = addresses.decodeAddress(toAddress)
if status != 'success':
with bitmessagemain.shared.printLock:
print 'ToAddress Error: %s , %s'%(toAddress,status)
return (toAddress,status)
status, addressVersionNumber, streamNumber, fromRipe = addresses.decodeAddress(fromAddress)
if status != 'success':
with bitmessagemain.shared.printLock:
print 'fromAddress Error: %s , %s'%(fromAddress,status)
return (fromAddress,status)
toAddress = addresses.addBMIfNotPresent(toAddress)
fromAddress = addresses.addBMIfNotPresent(fromAddress)
try:
fromAddressEnabled = bitmessagemain.shared.config.getboolean(fromAddress, 'enabled')
except:
return (fromAddress,'fromAddressNotPresentError')
if not fromAddressEnabled:
return (fromAddress,'fromAddressDisabledError')
ackdata = openssl.OpenSSL.rand(32)
t = ('', toAddress, toRipe, fromAddress, subject, message, ackdata, int(
time.time()), 'msgqueued', 1, 1, 'sent', 2)
helper_sent.insert(t)
toLabel = ''
queryreturn = bitmessagemain.shared.sqlQuery('''select label from addressbook where address=?''',toAddress)
if queryreturn != []:
for row in queryreturn:
toLabel, = row
bitmessagemain.shared.UISignalQueue.put(('displayNewSentMessage', (
toAddress, toLabel, fromAddress, subject, message, ackdata)))
bitmessagemain.shared.workerQueue.put(('sendmessage', toAddress))
return ackdata.encode('hex')
def validate(self, s, pos):
if self.addressObject is None:
address = None
else:
address = str(self.addressObject.text().toUtf8())
if address == "":
address = None
if self.passPhraseObject is None:
passPhrase = ""
else:
passPhrase = str(self.passPhraseObject.text().toUtf8())
if passPhrase == "":
passPhrase = None
# no chan name
if passPhrase is None:
self.setError(_translate("AddressValidator", "Chan name/passphrase needed. You didn't enter a chan name."))
return (QtGui.QValidator.Intermediate, pos)
if self.addressMandatory or address is not None:
# check if address already exists:
if address in getSortedAccounts():
self.setError(_translate("AddressValidator", "Address already present as one of your identities."))
return (QtGui.QValidator.Intermediate, pos)
# version too high
if decodeAddress(address)[0] == 'versiontoohigh':
self.setError(_translate("AddressValidator", "Address too new. Although that Bitmessage address might be valid, its version number is too new for us to handle. Perhaps you need to upgrade Bitmessage."))
return (QtGui.QValidator.Intermediate, pos)
# invalid
if decodeAddress(address)[0] != 'success':
self.setError(_translate("AddressValidator", "The Bitmessage address is not valid."))
return (QtGui.QValidator.Intermediate, pos)
# this just disables the OK button without changing the feedback text
# but only if triggered by textEdited, not by clicking the Ok button
if not self.buttonBox.button(QtGui.QDialogButtonBox.Ok).hasFocus():
self.setError(None)
# check through generator
if address is None:
addressGeneratorQueue.put(('createChan', 4, 1, str_chan + ' ' + str(passPhrase), passPhrase, False))
else:
addressGeneratorQueue.put(('joinChan', addBMIfNotPresent(address), str_chan + ' ' + str(passPhrase), passPhrase, False))
if self.buttonBox.button(QtGui.QDialogButtonBox.Ok).hasFocus():
return (self.returnValid(), pos)
else:
return (QtGui.QValidator.Intermediate, pos)
def validate(self, s, pos):
if self.addressObject is None:
address = None
else:
address = str(self.addressObject.text().toUtf8())
if address == "":
address = None
if self.passPhraseObject is None:
passPhrase = ""
else:
passPhrase = str(self.passPhraseObject.text().toUtf8())
if passPhrase == "":
passPhrase = None
# no chan name
if passPhrase is None:
self.setError(_translate("AddressValidator", "Chan name/passphrase needed. You didn't enter a chan name."))
return (QtGui.QValidator.Intermediate, pos)
if self.addressMandatory or address is not None:
# check if address already exists:
if address in getSortedAccounts():
self.setError(_translate("AddressValidator", "Address already present as one of your identities."))
return (QtGui.QValidator.Intermediate, pos)
# version too high
if decodeAddress(address)[0] == 'versiontoohigh':
self.setError(_translate("AddressValidator", "Address too new. Although that Bitmessage address might be valid, its version number is too new for us to handle. Perhaps you need to upgrade Bitmessage."))
return (QtGui.QValidator.Intermediate, pos)
# invalid
if decodeAddress(address)[0] != 'success':
self.setError(_translate("AddressValidator", "The Bitmessage address is not valid."))
return (QtGui.QValidator.Intermediate, pos)
# this just disables the OK button without changing the feedback text
# but only if triggered by textEdited, not by clicking the Ok button
if not self.buttonBox.button(QtGui.QDialogButtonBox.Ok).hasFocus():
self.setError(None)
# check through generator
if address is None:
addressGeneratorQueue.put(('createChan', 4, 1, str_chan + ' ' + str(passPhrase), passPhrase, False))
else:
addressGeneratorQueue.put(('joinChan', addBMIfNotPresent(address), str_chan + ' ' + str(passPhrase), passPhrase, False))
if self.buttonBox.button(QtGui.QDialogButtonBox.Ok).hasFocus():
return (self.returnValid(), pos)
else:
return (QtGui.QValidator.Intermediate, pos)
def accept(self):
self.timer.stop()
self.hide()
apiAddressGeneratorReturnQueue.queue.clear()
if self.chanAddress.text().toUtf8() == "":
addressGeneratorQueue.put(('createChan', 4, 1, str_chan + ' ' + str(self.chanPassPhrase.text().toUtf8()), self.chanPassPhrase.text().toUtf8(), True))
else:
addressGeneratorQueue.put(('joinChan', addBMIfNotPresent(self.chanAddress.text().toUtf8()), str_chan + ' ' + str(self.chanPassPhrase.text().toUtf8()), self.chanPassPhrase.text().toUtf8(), True))
addressGeneratorReturnValue = apiAddressGeneratorReturnQueue.get(True)
if len(addressGeneratorReturnValue) > 0 and addressGeneratorReturnValue[0] != 'chan name does not match address':
UISignalQueue.put(('updateStatusBar', _translate("newchandialog", "Successfully created / joined chan %1").arg(unicode(self.chanPassPhrase.text()))))
self.parent.ui.tabWidget.setCurrentIndex(3)
self.done(QtGui.QDialog.Accepted)
else:
UISignalQueue.put(('updateStatusBar', _translate("newchandialog", "Chan creation / joining failed")))
self.done(QtGui.QDialog.Rejected)
def avatarize(address):
"""
loads a supported image for the given address' hash form 'avatars' folder
falls back to default avatar if 'default.*' file exists
falls back to identiconize(address)
"""
idcon = QtGui.QIcon()
hash = hashlib.md5(addBMIfNotPresent(address)).hexdigest()
str_broadcast_subscribers = '[Broadcast subscribers]'
if address == str_broadcast_subscribers:
# don't hash [Broadcast subscribers]
hash = address
# http://pyqt.sourceforge.net/Docs/PyQt4/qimagereader.html#supportedImageFormats
# print QImageReader.supportedImageFormats ()
# QImageReader.supportedImageFormats ()
extensions = [
'PNG', 'GIF', 'JPG', 'JPEG', 'SVG', 'BMP', 'MNG', 'PBM', 'PGM', 'PPM',
'TIFF', 'XBM', 'XPM', 'TGA'
]
# try to find a specific avatar
for ext in extensions:
lower_hash = state.appdata + 'avatars/' + hash + '.' + ext.lower()
upper_hash = state.appdata + 'avatars/' + hash + '.' + ext.upper()
if os.path.isfile(lower_hash):
# print 'found avatar of ', address
idcon.addFile(lower_hash)
return idcon
elif os.path.isfile(upper_hash):
# print 'found avatar of ', address
idcon.addFile(upper_hash)
return idcon
# if we haven't found any, try to find a default avatar
for ext in extensions:
lower_default = state.appdata + 'avatars/' + 'default.' + ext.lower()
upper_default = state.appdata + 'avatars/' + 'default.' + ext.upper()
if os.path.isfile(lower_default):
default = lower_default
idcon.addFile(lower_default)
return idcon
elif os.path.isfile(upper_default):
default = upper_default
idcon.addFile(upper_default)
return idcon
# If no avatar is found
return identiconize(address)
def HandleDeleteAddress(self, params):
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
address, = params
status, addressVersionNumber, streamNumber, toRipe = \
self._verifyAddress(address)
address = addBMIfNotPresent(address)
if not BMConfigParser().has_section(address):
raise APIError(
13, 'Could not find this address in your keys.dat file.')
BMConfigParser().remove_section(address)
with open(state.appdata + 'keys.dat', 'wb') as configfile:
BMConfigParser().write(configfile)
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderMessagelistToLabels', ''))
shared.reloadMyAddressHashes()
return 'success'
def HandleAddAddressBookEntry(self, params):
if len(params) != 2:
raise APIError(0, "I need label and address")
address, label = params
label = self._decode(label, "base64")
address = addBMIfNotPresent(address)
self._verifyAddress(address)
queryreturn = sqlQuery(
"SELECT address FROM addressbook WHERE address=?", address)
if queryreturn != []:
raise APIError(
16, 'You already have this address in your address book.')
sqlExecute("INSERT INTO addressbook VALUES(?,?)", label, address)
queues.UISignalQueue.put(('rerenderMessagelistFromLabels', ''))
queues.UISignalQueue.put(('rerenderMessagelistToLabels', ''))
queues.UISignalQueue.put(('rerenderAddressBook', ''))
return "Added address %s to address book" % address
def send(self):
"""Send message from one address to another."""
fromAddress = self.ids.spinner_id.text
# For now we are using static address i.e we are not using recipent field value.
toAddress = "BM-2cWyUfBdY2FbgyuCb7abFZ49JYxSzUhNFe"
message = self.ids.message.text
subject = self.ids.subject.text
encoding = 3
print("message: ", self.ids.message.text)
sendMessageToPeople = True
if sendMessageToPeople:
if toAddress != '':
status, addressVersionNumber, streamNumber, ripe = decodeAddress(
toAddress)
if status == 'success':
toAddress = addBMIfNotPresent(toAddress)
if addressVersionNumber > 4 or addressVersionNumber <= 1:
print(
"addressVersionNumber > 4 or addressVersionNumber <= 1"
)
if streamNumber > 1 or streamNumber == 0:
print("streamNumber > 1 or streamNumber == 0")
if statusIconColor == 'red':
print("shared.statusIconColor == 'red'")
stealthLevel = BMConfigParser().safeGetInt(
'bitmessagesettings', 'ackstealthlevel')
ackdata = genAckPayload(streamNumber, stealthLevel)
t = ()
sqlExecute(
'''INSERT INTO sent VALUES (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)''',
'', toAddress, ripe, fromAddress,
subject, message, ackdata, int(time.time()),
int(time.time()), 0, 'msgqueued', 0, 'sent', encoding,
BMConfigParser().getint('bitmessagesettings', 'ttl'))
toLabel = ''
queues.workerQueue.put(('sendmessage', toAddress))
print(
"sqlExecute successfully ##### ##################")
self.ids.message.text = ''
self.ids.spinner_id.text = '<select>'
self.ids.subject.text = ''
self.ids.recipent.text = ''
return None
def identiconize(address):
size = 48
# If you include another identicon library, please generate an
# example identicon with the following md5 hash:
# 3fd4bf901b9d4ea1394f0fb358725b28
try:
identicon_lib = BMConfigParser().get('bitmessagesettings',
'identiconlib')
except:
# default to qidenticon_two_x
identicon_lib = 'qidenticon_two_x'
# As an 'identiconsuffix' you could put "@bitmessge.ch" or "@bm.addr" to make it compatible with other identicon generators. (Note however, that E-Mail programs might convert the BM-address to lowercase first.)
# It can be used as a pseudo-password to salt the generation of the identicons to decrease the risk
# of attacks where someone creates an address to mimic someone else's identicon.
identiconsuffix = BMConfigParser().get('bitmessagesettings',
'identiconsuffix')
if not BMConfigParser().getboolean('bitmessagesettings', 'useidenticons'):
idcon = QtGui.QIcon()
return idcon
# originally by:
# :Author:Shin Adachi <*****@*****.**>
# Licesensed under FreeBSD License.
# stripped from PIL and uses QT instead (by sendiulo, same license)
hash = hashlib.md5(addBMIfNotPresent(address) +
identiconsuffix).hexdigest()
use_two_colors = (
identicon_lib[:len('qidenticon_two')] == 'qidenticon_two')
opacity = int(not ((identicon_lib == 'qidenticon_x') |
(identicon_lib == 'qidenticon_two_x') |
(identicon_lib == 'qidenticon_b') |
(identicon_lib == 'qidenticon_two_b'))) * 255
penwidth = 0
image = qidenticon.render_identicon(int(hash, 16), size, use_two_colors,
opacity, penwidth)
# filename = './images/identicons/'+hash+'.png'
# image.save(filename)
idcon = QtGui.QIcon()
idcon.addPixmap(image, QtGui.QIcon.Normal, QtGui.QIcon.Off)
return idcon
def addSubscription(self, label, address):
'''Add a Subscription
Usage: api.addSubscription(label,bmaddressl)'''
logger.info('Label: %s Address: %s'%(label, address))
unicode(label, 'utf-8')
address = addresses.addBMIfNotPresent(address)
status, addressVersionNumber, streamNumber, toRipe = addresses.decodeAddress(address)
if status != 'success':
raise APIError('Address Error: %s , %s'%(address,status))
# First we must check to see if the address is already in the
# subscriptions list.
queryreturn = bitmessagemain.shared.sqlQuery('''select * from subscriptions where address=?''',address)
if queryreturn != []:
raise APIError('AlreadySubscribedError')
bitmessagemain.shared.sqlExecute('''INSERT INTO subscriptions VALUES (?,?,?)''',label, address, True)
bitmessagemain.shared.reloadBroadcastSendersForWhichImWatching()
return True
def HandleLeaveChan(self, params):
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
address, = params
status, addressVersionNumber, streamNumber, toRipe = \
self._verifyAddress(address)
address = addBMIfNotPresent(address)
if not BMConfigParser().has_section(address):
raise APIError(
13, 'Could not find this address in your keys.dat file.')
if not BMConfigParser().safeGetBoolean(address, 'chan'):
raise APIError(
25, 'Specified address is not a chan address.'
' Use deleteAddress API call instead.')
BMConfigParser().remove_section(address)
with open(state.appdata + 'keys.dat', 'wb') as configfile:
BMConfigParser().write(configfile)
return 'success'
def avatarize(address):
"""
loads a supported image for the given address' hash form 'avatars' folder
falls back to default avatar if 'default.*' file exists
falls back to identiconize(address)
"""
idcon = QtGui.QIcon()
hash = hashlib.md5(addBMIfNotPresent(address)).hexdigest()
str_broadcast_subscribers = '[Broadcast subscribers]'
if address == str_broadcast_subscribers:
# don't hash [Broadcast subscribers]
hash = address
# http://pyqt.sourceforge.net/Docs/PyQt4/qimagereader.html#supportedImageFormats
# print QImageReader.supportedImageFormats ()
# QImageReader.supportedImageFormats ()
extensions = ['PNG', 'GIF', 'JPG', 'JPEG', 'SVG', 'BMP', 'MNG', 'PBM', 'PGM', 'PPM', 'TIFF', 'XBM', 'XPM', 'TGA']
# try to find a specific avatar
for ext in extensions:
lower_hash = shared.appdata + 'avatars/' + hash + '.' + ext.lower()
upper_hash = shared.appdata + 'avatars/' + hash + '.' + ext.upper()
if os.path.isfile(lower_hash):
# print 'found avatar of ', address
idcon.addFile(lower_hash)
return idcon
elif os.path.isfile(upper_hash):
# print 'found avatar of ', address
idcon.addFile(upper_hash)
return idcon
# if we haven't found any, try to find a default avatar
for ext in extensions:
lower_default = shared.appdata + 'avatars/' + 'default.' + ext.lower()
upper_default = shared.appdata + 'avatars/' + 'default.' + ext.upper()
if os.path.isfile(lower_default):
default = lower_default
idcon.addFile(lower_default)
return idcon
elif os.path.isfile(upper_default):
default = upper_default
idcon.addFile(upper_default)
return idcon
# If no avatar is found
return identiconize(address)
def click_pushButtonAddBlacklist(self):
self.NewBlacklistDialogInstance = AddAddressDialog(self)
if self.NewBlacklistDialogInstance.exec_():
if self.NewBlacklistDialogInstance.ui.labelAddressCheck.text() == _translate("MainWindow", "Address is valid."):
address = addBMIfNotPresent(str(
self.NewBlacklistDialogInstance.ui.lineEditAddress.text()))
# First we must check to see if the address is already in the
# address book. The user cannot add it again or else it will
# cause problems when updating and deleting the entry.
t = (address,)
if BMConfigParser().get('bitmessagesettings', 'blackwhitelist') == 'black':
sql = '''select * from blacklist where address=?'''
else:
sql = '''select * from whitelist where address=?'''
queryreturn = sqlQuery(sql,*t)
if queryreturn == []:
self.tableWidgetBlacklist.setSortingEnabled(False)
self.tableWidgetBlacklist.insertRow(0)
newItem = QtGui.QTableWidgetItem(unicode(
self.NewBlacklistDialogInstance.ui.newAddressLabel.text().toUtf8(), 'utf-8'))
newItem.setIcon(avatarize(address))
self.tableWidgetBlacklist.setItem(0, 0, newItem)
newItem = QtGui.QTableWidgetItem(address)
newItem.setFlags(
QtCore.Qt.ItemIsSelectable | QtCore.Qt.ItemIsEnabled)
self.tableWidgetBlacklist.setItem(0, 1, newItem)
self.tableWidgetBlacklist.setSortingEnabled(True)
t = (str(self.NewBlacklistDialogInstance.ui.newAddressLabel.text().toUtf8()), address, True)
if BMConfigParser().get('bitmessagesettings', 'blackwhitelist') == 'black':
sql = '''INSERT INTO blacklist VALUES (?,?,?)'''
else:
sql = '''INSERT INTO whitelist VALUES (?,?,?)'''
sqlExecute(sql, *t)
else:
self.statusBar().showMessage(_translate(
"MainWindow", "Error: You cannot add the same address to your list twice. Perhaps rename the existing one if you want."))
else:
self.statusBar().showMessage(_translate(
"MainWindow", "The address you entered was invalid. Ignoring it."))
def identiconize(address):
size = 48
# If you include another identicon library, please generate an
# example identicon with the following md5 hash:
# 3fd4bf901b9d4ea1394f0fb358725b28
try:
identicon_lib = BMConfigParser().get('bitmessagesettings',
'identiconlib')
except:
# default to qidenticon_two_x
identicon_lib = 'qidenticon_two_x'
# As an 'identiconsuffix' you could put "@bitmessge.ch" or "@bm.addr" to make it compatible with other identicon generators. (Note however, that E-Mail programs might convert the BM-address to lowercase first.)
# It can be used as a pseudo-password to salt the generation of the identicons to decrease the risk
# of attacks where someone creates an address to mimic someone else's identicon.
identiconsuffix = BMConfigParser().get('bitmessagesettings',
'identiconsuffix')
if not BMConfigParser().getboolean('bitmessagesettings', 'useidenticons'):
idcon = QtGui.QIcon()
return idcon
if (identicon_lib[:len('qidenticon')] == 'qidenticon'):
# print identicon_lib
# originally by:
# :Author:Shin Adachi <*****@*****.**>
# Licesensed under FreeBSD License.
# stripped from PIL and uses QT instead (by sendiulo, same license)
import qidenticon
hash = hashlib.md5(addBMIfNotPresent(address) +
identiconsuffix).hexdigest()
use_two_colors = (
identicon_lib[:len('qidenticon_two')] == 'qidenticon_two')
opacity = int(not ((identicon_lib == 'qidenticon_x') |
(identicon_lib == 'qidenticon_two_x') |
(identicon_lib == 'qidenticon_b') |
(identicon_lib == 'qidenticon_two_b'))) * 255
penwidth = 0
image = qidenticon.render_identicon(int(hash, 16), size,
use_two_colors, opacity, penwidth)
# filename = './images/identicons/'+hash+'.png'
# image.save(filename)
idcon = QtGui.QIcon()
idcon.addPixmap(image, QtGui.QIcon.Normal, QtGui.QIcon.Off)
return idcon
elif identicon_lib == 'pydenticon':
# print identicon_lib
# Here you could load pydenticon.py (just put it in the "src" folder of your Bitmessage source)
from pydenticon import Pydenticon
# It is not included in the source, because it is licensed under GPLv3
# GPLv3 is a copyleft license that would influence our licensing
# Find the source here: http://boottunes.googlecode.com/svn-history/r302/trunk/src/pydenticon.py
# note that it requires PIL to be installed: http://www.pythonware.com/products/pil/
idcon_render = Pydenticon(
addBMIfNotPresent(address) + identiconsuffix, size * 3)
rendering = idcon_render._render()
data = rendering.convert("RGBA").tostring("raw", "RGBA")
qim = QImage(data, size, size, QImage.Format_ARGB32)
pix = QPixmap.fromImage(qim)
idcon = QtGui.QIcon()
idcon.addPixmap(pix, QtGui.QIcon.Normal, QtGui.QIcon.Off)
return idcon
def _handle_request(self, method, params):
if method == 'helloWorld':
(a, b) = params
return a + '-' + b
elif method == 'add':
(a, b) = params
return a + b
elif method == 'statusBar':
message, = params
shared.UISignalQueue.put(('updateStatusBar', message))
elif method == 'listAddresses' or method == 'listAddresses2':
data = '{"addresses":['
configSections = shared.config.sections()
for addressInKeysFile in configSections:
if addressInKeysFile != 'bitmessagesettings':
status, addressVersionNumber, streamNumber, hash01 = decodeAddress(
addressInKeysFile)
if len(data) > 20:
data += ','
if shared.config.has_option(addressInKeysFile, 'chan'):
chan = shared.config.getboolean(addressInKeysFile, 'chan')
else:
chan = False
label = shared.config.get(addressInKeysFile, 'label')
if method == 'listAddresses2':
label = label.encode('base64')
data += json.dumps({'label': label, 'address': addressInKeysFile, 'stream':
streamNumber, 'enabled': shared.config.getboolean(addressInKeysFile, 'enabled'), 'chan': chan}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'listAddressBookEntries' or method == 'listAddressbook': # the listAddressbook alias should be removed eventually.
queryreturn = sqlQuery('''SELECT label, address from addressbook''')
data = '{"addresses":['
for row in queryreturn:
label, address = row
label = shared.fixPotentiallyInvalidUTF8Data(label)
if len(data) > 20:
data += ','
data += json.dumps({'label':label.encode('base64'), 'address': address}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'addAddressBookEntry' or method == 'addAddressbook': # the addAddressbook alias should be deleted eventually.
if len(params) != 2:
raise APIError(0, "I need label and address")
address, label = params
label = self._decode(label, "base64")
address = addBMIfNotPresent(address)
self._verifyAddress(address)
queryreturn = sqlQuery("SELECT address FROM addressbook WHERE address=?", address)
if queryreturn != []:
raise APIError(16, 'You already have this address in your address book.')
sqlExecute("INSERT INTO addressbook VALUES(?,?)", label, address)
shared.UISignalQueue.put(('rerenderInboxFromLabels',''))
shared.UISignalQueue.put(('rerenderSentToLabels',''))
shared.UISignalQueue.put(('rerenderAddressBook',''))
return "Added address %s to address book" % address
elif method == 'deleteAddressBookEntry' or method == 'deleteAddressbook': # The deleteAddressbook alias should be deleted eventually.
if len(params) != 1:
raise APIError(0, "I need an address")
address, = params
address = addBMIfNotPresent(address)
self._verifyAddress(address)
sqlExecute('DELETE FROM addressbook WHERE address=?', address)
shared.UISignalQueue.put(('rerenderInboxFromLabels',''))
shared.UISignalQueue.put(('rerenderSentToLabels',''))
shared.UISignalQueue.put(('rerenderAddressBook',''))
return "Deleted address book entry for %s if it existed" % address
elif method == 'createRandomAddress':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 1:
label, = params
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 2:
label, eighteenByteRipe = params
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 3:
label, eighteenByteRipe, totalDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 4:
label, eighteenByteRipe, totalDifficulty, smallMessageDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = int(
shared.networkDefaultPayloadLengthExtraBytes * smallMessageDifficulty)
else:
raise APIError(0, 'Too many parameters!')
label = self._decode(label, "base64")
try:
unicode(label, 'utf-8')
except:
raise APIError(17, 'Label is not valid UTF-8 data.')
shared.apiAddressGeneratorReturnQueue.queue.clear()
streamNumberForAddress = 1
shared.addressGeneratorQueue.put((
'createRandomAddress', 4, streamNumberForAddress, label, 1, "", eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes))
return shared.apiAddressGeneratorReturnQueue.get()
elif method == 'createDeterministicAddresses':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 1:
passphrase, = params
numberOfAddresses = 1
addressVersionNumber = 0
streamNumber = 0
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 2:
passphrase, numberOfAddresses = params
addressVersionNumber = 0
streamNumber = 0
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 3:
passphrase, numberOfAddresses, addressVersionNumber = params
streamNumber = 0
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 4:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber = params
eighteenByteRipe = False
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 5:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe = params
nonceTrialsPerByte = shared.config.get(
'bitmessagesettings', 'defaultnoncetrialsperbyte')
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 6:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe, totalDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = shared.config.get(
'bitmessagesettings', 'defaultpayloadlengthextrabytes')
elif len(params) == 7:
passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe, totalDifficulty, smallMessageDifficulty = params
nonceTrialsPerByte = int(
shared.networkDefaultProofOfWorkNonceTrialsPerByte * totalDifficulty)
payloadLengthExtraBytes = int(
shared.networkDefaultPayloadLengthExtraBytes * smallMessageDifficulty)
else:
raise APIError(0, 'Too many parameters!')
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
if not isinstance(eighteenByteRipe, bool):
raise APIError(23, 'Bool expected in eighteenByteRipe, saw %s instead' % type(eighteenByteRipe))
passphrase = self._decode(passphrase, "base64")
if addressVersionNumber == 0: # 0 means "just use the proper addressVersionNumber"
addressVersionNumber = 4
if addressVersionNumber != 3 and addressVersionNumber != 4:
raise APIError(2,'The address version number currently must be 3, 4, or 0 (which means auto-select). ' + addressVersionNumber + ' isn\'t supported.')
if streamNumber == 0: # 0 means "just use the most available stream"
streamNumber = 1
if streamNumber != 1:
raise APIError(3,'The stream number must be 1 (or 0 which means auto-select). Others aren\'t supported.')
if numberOfAddresses == 0:
raise APIError(4, 'Why would you ask me to generate 0 addresses for you?')
if numberOfAddresses > 999:
raise APIError(5, 'You have (accidentally?) specified too many addresses to make. Maximum 999. This check only exists to prevent mischief; if you really want to create more addresses than this, contact the Bitmessage developers and we can modify the check or you can do it yourself by searching the source code for this message.')
shared.apiAddressGeneratorReturnQueue.queue.clear()
logger.debug('Requesting that the addressGenerator create %s addresses.', numberOfAddresses)
shared.addressGeneratorQueue.put(
('createDeterministicAddresses', addressVersionNumber, streamNumber,
'unused API address', numberOfAddresses, passphrase, eighteenByteRipe, nonceTrialsPerByte, payloadLengthExtraBytes))
data = '{"addresses":['
queueReturn = shared.apiAddressGeneratorReturnQueue.get()
for item in queueReturn:
if len(data) > 20:
data += ','
data += "\"" + item + "\""
data += ']}'
return data
elif method == 'getDeterministicAddress':
if len(params) != 3:
raise APIError(0, 'I need exactly 3 parameters.')
passphrase, addressVersionNumber, streamNumber = params
numberOfAddresses = 1
eighteenByteRipe = False
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
passphrase = self._decode(passphrase, "base64")
if addressVersionNumber != 3 and addressVersionNumber != 4:
raise APIError(2, 'The address version number currently must be 3 or 4. ' + addressVersionNumber + ' isn\'t supported.')
if streamNumber != 1:
raise APIError(3, ' The stream number must be 1. Others aren\'t supported.')
shared.apiAddressGeneratorReturnQueue.queue.clear()
logger.debug('Requesting that the addressGenerator create %s addresses.', numberOfAddresses)
shared.addressGeneratorQueue.put(
('getDeterministicAddress', addressVersionNumber,
streamNumber, 'unused API address', numberOfAddresses, passphrase, eighteenByteRipe))
return shared.apiAddressGeneratorReturnQueue.get()
elif method == 'createChan':
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
passphrase, = params
passphrase = self._decode(passphrase, "base64")
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
# It would be nice to make the label the passphrase but it is
# possible that the passphrase contains non-utf-8 characters.
try:
unicode(passphrase, 'utf-8')
label = str_chan + ' ' + passphrase
except:
label = str_chan + ' ' + repr(passphrase)
addressVersionNumber = 4
streamNumber = 1
shared.apiAddressGeneratorReturnQueue.queue.clear()
logger.debug('Requesting that the addressGenerator create chan %s.', passphrase)
shared.addressGeneratorQueue.put(('createChan', addressVersionNumber, streamNumber, label, passphrase))
queueReturn = shared.apiAddressGeneratorReturnQueue.get()
if len(queueReturn) == 0:
raise APIError(24, 'Chan address is already present.')
address = queueReturn[0]
return address
elif method == 'joinChan':
if len(params) < 2:
raise APIError(0, 'I need two parameters.')
elif len(params) == 2:
passphrase, suppliedAddress= params
passphrase = self._decode(passphrase, "base64")
if len(passphrase) == 0:
raise APIError(1, 'The specified passphrase is blank.')
# It would be nice to make the label the passphrase but it is
# possible that the passphrase contains non-utf-8 characters.
try:
unicode(passphrase, 'utf-8')
label = str_chan + ' ' + passphrase
except:
label = str_chan + ' ' + repr(passphrase)
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(suppliedAddress)
suppliedAddress = addBMIfNotPresent(suppliedAddress)
shared.apiAddressGeneratorReturnQueue.queue.clear()
shared.addressGeneratorQueue.put(('joinChan', suppliedAddress, label, passphrase))
addressGeneratorReturnValue = shared.apiAddressGeneratorReturnQueue.get()
if addressGeneratorReturnValue == 'chan name does not match address':
raise APIError(18, 'Chan name does not match address.')
if len(addressGeneratorReturnValue) == 0:
raise APIError(24, 'Chan address is already present.')
#TODO: this variable is not used to anything
createdAddress = addressGeneratorReturnValue[0] # in case we ever want it for anything.
return "success"
elif method == 'leaveChan':
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
address, = params
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(address)
address = addBMIfNotPresent(address)
if not shared.config.has_section(address):
raise APIError(13, 'Could not find this address in your keys.dat file.')
if not shared.safeConfigGetBoolean(address, 'chan'):
raise APIError(25, 'Specified address is not a chan address. Use deleteAddress API call instead.')
shared.config.remove_section(address)
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
return 'success'
elif method == 'deleteAddress':
if len(params) == 0:
raise APIError(0, 'I need parameters.')
elif len(params) == 1:
address, = params
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(address)
address = addBMIfNotPresent(address)
if not shared.config.has_section(address):
raise APIError(13, 'Could not find this address in your keys.dat file.')
shared.config.remove_section(address)
with open(shared.appdata + 'keys.dat', 'wb') as configfile:
shared.config.write(configfile)
shared.UISignalQueue.put(('rerenderInboxFromLabels',''))
shared.UISignalQueue.put(('rerenderSentToLabels',''))
shared.reloadMyAddressHashes()
return 'success'
elif method == 'getAllInboxMessages':
queryreturn = sqlQuery(
'''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype, read FROM inbox where folder='inbox' ORDER BY received''')
data = '{"inboxMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, received, message, encodingtype, read = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid': msgid.encode('hex'), 'toAddress': toAddress, 'fromAddress': fromAddress, 'subject': subject.encode(
'base64'), 'message': message.encode('base64'), 'encodingType': encodingtype, 'receivedTime': received, 'read': read}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getAllInboxMessageIds' or method == 'getAllInboxMessageIDs':
queryreturn = sqlQuery(
'''SELECT msgid FROM inbox where folder='inbox' ORDER BY received''')
data = '{"inboxMessageIds":['
for row in queryreturn:
msgid = row[0]
if len(data) > 25:
data += ','
data += json.dumps({'msgid': msgid.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getInboxMessageById' or method == 'getInboxMessageByID':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 1:
msgid = self._decode(params[0], "hex")
elif len(params) >= 2:
msgid = self._decode(params[0], "hex")
readStatus = params[1]
if not isinstance(readStatus, bool):
raise APIError(23, 'Bool expected in readStatus, saw %s instead.' % type(readStatus))
queryreturn = sqlQuery('''SELECT read FROM inbox WHERE msgid=?''', msgid)
# UPDATE is slow, only update if status is different
if queryreturn != [] and (queryreturn[0][0] == 1) != readStatus:
sqlExecute('''UPDATE inbox set read = ? WHERE msgid=?''', readStatus, msgid)
shared.UISignalQueue.put(('changedInboxUnread', None))
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype, read FROM inbox WHERE msgid=?''', msgid)
data = '{"inboxMessage":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, received, message, encodingtype, read = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'receivedTime':received, 'read': read}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getAllSentMessages':
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent where folder='sent' ORDER BY lastactiontime''')
data = '{"sentMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getAllSentMessageIds' or method == 'getAllSentMessageIDs':
queryreturn = sqlQuery('''SELECT msgid FROM sent where folder='sent' ORDER BY lastactiontime''')
data = '{"sentMessageIds":['
for row in queryreturn:
msgid = row[0]
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getInboxMessagesByReceiver' or method == 'getInboxMessagesByAddress': #after some time getInboxMessagesByAddress should be removed
if len(params) == 0:
raise APIError(0, 'I need parameters!')
toAddress = params[0]
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, received, message, encodingtype FROM inbox WHERE folder='inbox' AND toAddress=?''', toAddress)
data = '{"inboxMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, received, message, encodingtype = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'receivedTime':received}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getSentMessageById' or method == 'getSentMessageByID':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE msgid=?''', msgid)
data = '{"sentMessage":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getSentMessagesByAddress' or method == 'getSentMessagesBySender':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
fromAddress = params[0]
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE folder='sent' AND fromAddress=? ORDER BY lastactiontime''',
fromAddress)
data = '{"sentMessages":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
if len(data) > 25:
data += ','
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getSentMessageByAckData':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
ackData = self._decode(params[0], "hex")
queryreturn = sqlQuery('''SELECT msgid, toaddress, fromaddress, subject, lastactiontime, message, encodingtype, status, ackdata FROM sent WHERE ackdata=?''',
ackData)
data = '{"sentMessage":['
for row in queryreturn:
msgid, toAddress, fromAddress, subject, lastactiontime, message, encodingtype, status, ackdata = row
subject = shared.fixPotentiallyInvalidUTF8Data(subject)
message = shared.fixPotentiallyInvalidUTF8Data(message)
data += json.dumps({'msgid':msgid.encode('hex'), 'toAddress':toAddress, 'fromAddress':fromAddress, 'subject':subject.encode('base64'), 'message':message.encode('base64'), 'encodingType':encodingtype, 'lastActionTime':lastactiontime, 'status':status, 'ackData':ackdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'trashMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
# Trash if in inbox table
helper_inbox.trash(msgid)
# Trash if in sent table
sqlExecute('''UPDATE sent SET folder='trash' WHERE msgid=?''', msgid)
return 'Trashed message (assuming message existed).'
elif method == 'trashInboxMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
helper_inbox.trash(msgid)
return 'Trashed inbox message (assuming message existed).'
elif method == 'trashSentMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
msgid = self._decode(params[0], "hex")
sqlExecute('''UPDATE sent SET folder='trash' WHERE msgid=?''', msgid)
return 'Trashed sent message (assuming message existed).'
elif method == 'trashSentMessageByAckData':
# This API method should only be used when msgid is not available
if len(params) == 0:
raise APIError(0, 'I need parameters!')
ackdata = self._decode(params[0], "hex")
sqlExecute('''UPDATE sent SET folder='trash' WHERE ackdata=?''',
ackdata)
return 'Trashed sent message (assuming message existed).'
elif method == 'sendMessage':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 4:
toAddress, fromAddress, subject, message = params
encodingType = 2
elif len(params) == 5:
toAddress, fromAddress, subject, message, encodingType = params
if encodingType != 2:
raise APIError(6, 'The encoding type must be 2 because that is the only one this program currently supports.')
subject = self._decode(subject, "base64")
message = self._decode(message, "base64")
toAddress = addBMIfNotPresent(toAddress)
fromAddress = addBMIfNotPresent(fromAddress)
status, addressVersionNumber, streamNumber, toRipe = self._verifyAddress(toAddress)
self._verifyAddress(fromAddress)
try:
fromAddressEnabled = shared.config.getboolean(
fromAddress, 'enabled')
except:
raise APIError(13, 'Could not find your fromAddress in the keys.dat file.')
if not fromAddressEnabled:
raise APIError(14, 'Your fromAddress is disabled. Cannot send.')
ackdata = OpenSSL.rand(32)
t = ('', toAddress, toRipe, fromAddress, subject, message, ackdata, int(
time.time()), 'msgqueued', 1, 1, 'sent', 2)
helper_sent.insert(t)
toLabel = ''
queryreturn = sqlQuery('''select label from addressbook where address=?''', toAddress)
if queryreturn != []:
for row in queryreturn:
toLabel, = row
# apiSignalQueue.put(('displayNewSentMessage',(toAddress,toLabel,fromAddress,subject,message,ackdata)))
shared.UISignalQueue.put(('displayNewSentMessage', (
toAddress, toLabel, fromAddress, subject, message, ackdata)))
shared.workerQueue.put(('sendmessage', toAddress))
return ackdata.encode('hex')
elif method == 'sendBroadcast':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 3:
fromAddress, subject, message = params
encodingType = 2
elif len(params) == 4:
fromAddress, subject, message, encodingType = params
if encodingType != 2:
raise APIError(6, 'The encoding type must be 2 because that is the only one this program currently supports.')
subject = self._decode(subject, "base64")
message = self._decode(message, "base64")
fromAddress = addBMIfNotPresent(fromAddress)
self._verifyAddress(fromAddress)
try:
fromAddressEnabled = shared.config.getboolean(
fromAddress, 'enabled')
except:
raise APIError(13, 'could not find your fromAddress in the keys.dat file.')
ackdata = OpenSSL.rand(32)
toAddress = '[Broadcast subscribers]'
ripe = ''
t = ('', toAddress, ripe, fromAddress, subject, message, ackdata, int(
time.time()), 'broadcastqueued', 1, 1, 'sent', 2)
helper_sent.insert(t)
toLabel = '[Broadcast subscribers]'
shared.UISignalQueue.put(('displayNewSentMessage', (
toAddress, toLabel, fromAddress, subject, message, ackdata)))
shared.workerQueue.put(('sendbroadcast', ''))
return ackdata.encode('hex')
elif method == 'getStatus':
if len(params) != 1:
raise APIError(0, 'I need one parameter!')
ackdata, = params
if len(ackdata) != 64:
raise APIError(15, 'The length of ackData should be 32 bytes (encoded in hex thus 64 characters).')
ackdata = self._decode(ackdata, "hex")
queryreturn = sqlQuery(
'''SELECT status FROM sent where ackdata=?''',
ackdata)
if queryreturn == []:
return 'notfound'
for row in queryreturn:
status, = row
return status
elif method == 'addSubscription':
if len(params) == 0:
raise APIError(0, 'I need parameters!')
if len(params) == 1:
address, = params
label = ''
if len(params) == 2:
address, label = params
label = self._decode(label, "base64")
try:
unicode(label, 'utf-8')
except:
raise APIError(17, 'Label is not valid UTF-8 data.')
if len(params) > 2:
raise APIError(0, 'I need either 1 or 2 parameters!')
address = addBMIfNotPresent(address)
self._verifyAddress(address)
# First we must check to see if the address is already in the
# subscriptions list.
queryreturn = sqlQuery('''select * from subscriptions where address=?''', address)
if queryreturn != []:
raise APIError(16, 'You are already subscribed to that address.')
sqlExecute('''INSERT INTO subscriptions VALUES (?,?,?)''',label, address, True)
shared.reloadBroadcastSendersForWhichImWatching()
shared.UISignalQueue.put(('rerenderInboxFromLabels', ''))
shared.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Added subscription.'
elif method == 'deleteSubscription':
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
address, = params
address = addBMIfNotPresent(address)
sqlExecute('''DELETE FROM subscriptions WHERE address=?''', address)
shared.reloadBroadcastSendersForWhichImWatching()
shared.UISignalQueue.put(('rerenderInboxFromLabels', ''))
shared.UISignalQueue.put(('rerenderSubscriptions', ''))
return 'Deleted subscription if it existed.'
elif method == 'listSubscriptions':
queryreturn = sqlQuery('''SELECT label, address, enabled FROM subscriptions''')
data = '{"subscriptions":['
for row in queryreturn:
label, address, enabled = row
label = shared.fixPotentiallyInvalidUTF8Data(label)
if len(data) > 20:
data += ','
data += json.dumps({'label':label.encode('base64'), 'address': address, 'enabled': enabled == 1}, indent=4, separators=(',',': '))
data += ']}'
return data
elif method == 'disseminatePreEncryptedMsg':
# The device issuing this command to PyBitmessage supplies a msg object that has
# already been encrypted but which still needs the POW to be done. PyBitmessage
# accepts this msg object and sends it out to the rest of the Bitmessage network
# as if it had generated the message itself. Please do not yet add this to the
# api doc.
if len(params) != 3:
raise APIError(0, 'I need 3 parameter!')
encryptedPayload, requiredAverageProofOfWorkNonceTrialsPerByte, requiredPayloadLengthExtraBytes = params
encryptedPayload = self._decode(encryptedPayload, "hex")
# Let us do the POW and attach it to the front
target = 2**64 / ((len(encryptedPayload)+requiredPayloadLengthExtraBytes+8) * requiredAverageProofOfWorkNonceTrialsPerByte)
with shared.printLock:
print '(For msg message via API) Doing proof of work. Total required difficulty:', float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte, 'Required small message difficulty:', float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes
powStartTime = time.time()
initialHash = hashlib.sha512(encryptedPayload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
with shared.printLock:
print '(For msg message via API) Found proof of work', trialValue, 'Nonce:', nonce
try:
print 'POW took', int(time.time() - powStartTime), 'seconds.', nonce / (time.time() - powStartTime), 'nonce trials per second.'
except:
pass
encryptedPayload = pack('>Q', nonce) + encryptedPayload
toStreamNumber = decodeVarint(encryptedPayload[16:26])[0]
inventoryHash = calculateInventoryHash(encryptedPayload)
objectType = 'msg'
shared.inventory[inventoryHash] = (
objectType, toStreamNumber, encryptedPayload, int(time.time()),'')
shared.inventorySets[toStreamNumber].add(inventoryHash)
with shared.printLock:
print 'Broadcasting inv for msg(API disseminatePreEncryptedMsg command):', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
toStreamNumber, 'advertiseobject', inventoryHash))
elif method == 'disseminatePubkey':
# The device issuing this command to PyBitmessage supplies a pubkey object to be
# disseminated to the rest of the Bitmessage network. PyBitmessage accepts this
# pubkey object and sends it out to the rest of the Bitmessage network as if it
# had generated the pubkey object itself. Please do not yet add this to the api
# doc.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
payload, = params
payload = self._decode(payload, "hex")
# Let us do the POW
target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For pubkey message via API) Doing proof of work...'
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For pubkey message via API) Found proof of work', trialValue, 'Nonce:', nonce
payload = pack('>Q', nonce) + payload
pubkeyReadPosition = 8 # bypass the nonce
if payload[pubkeyReadPosition:pubkeyReadPosition+4] == '\x00\x00\x00\x00': # if this pubkey uses 8 byte time
pubkeyReadPosition += 8
else:
pubkeyReadPosition += 4
addressVersion, addressVersionLength = decodeVarint(payload[pubkeyReadPosition:pubkeyReadPosition+10])
pubkeyReadPosition += addressVersionLength
pubkeyStreamNumber = decodeVarint(payload[pubkeyReadPosition:pubkeyReadPosition+10])[0]
inventoryHash = calculateInventoryHash(payload)
objectType = 'pubkey'
#todo: support v4 pubkeys
shared.inventory[inventoryHash] = (
objectType, pubkeyStreamNumber, payload, int(time.time()),'')
shared.inventorySets[pubkeyStreamNumber].add(inventoryHash)
with shared.printLock:
print 'broadcasting inv within API command disseminatePubkey with hash:', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
streamNumber, 'advertiseobject', inventoryHash))
elif method == 'getMessageDataByDestinationHash' or method == 'getMessageDataByDestinationTag':
# Method will eventually be used by a particular Android app to
# select relevant messages. Do not yet add this to the api
# doc.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
requestedHash, = params
if len(requestedHash) != 32:
raise APIError(19, 'The length of hash should be 32 bytes (encoded in hex thus 64 characters).')
requestedHash = self._decode(requestedHash, "hex")
# This is not a particularly commonly used API function. Before we
# use it we'll need to fill out a field in our inventory database
# which is blank by default (first20bytesofencryptedmessage).
queryreturn = sqlQuery(
'''SELECT hash, payload FROM inventory WHERE tag = '' and objecttype = 'msg' ; ''')
with SqlBulkExecute() as sql:
for row in queryreturn:
hash01, payload = row
readPosition = 16 # Nonce length + time length
readPosition += decodeVarint(payload[readPosition:readPosition+10])[1] # Stream Number length
t = (payload[readPosition:readPosition+32],hash01)
sql.execute('''UPDATE inventory SET tag=? WHERE hash=?; ''', *t)
queryreturn = sqlQuery('''SELECT payload FROM inventory WHERE tag = ?''',
requestedHash)
data = '{"receivedMessageDatas":['
for row in queryreturn:
payload, = row
if len(data) > 25:
data += ','
data += json.dumps({'data':payload.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'getPubkeyByHash':
# Method will eventually be used by a particular Android app to
# retrieve pubkeys. Please do not yet add this to the api docs.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
requestedHash, = params
if len(requestedHash) != 40:
raise APIError(19, 'The length of hash should be 20 bytes (encoded in hex thus 40 characters).')
requestedHash = self._decode(requestedHash, "hex")
queryreturn = sqlQuery('''SELECT transmitdata FROM pubkeys WHERE hash = ? ; ''', requestedHash)
data = '{"pubkey":['
for row in queryreturn:
transmitdata, = row
data += json.dumps({'data':transmitdata.encode('hex')}, indent=4, separators=(',', ': '))
data += ']}'
return data
elif method == 'clientStatus':
if len(shared.connectedHostsList) == 0:
networkStatus = 'notConnected'
elif len(shared.connectedHostsList) > 0 and not shared.clientHasReceivedIncomingConnections:
networkStatus = 'connectedButHaveNotReceivedIncomingConnections'
else:
networkStatus = 'connectedAndReceivingIncomingConnections'
return json.dumps({'networkConnections':len(shared.connectedHostsList),'numberOfMessagesProcessed':shared.numberOfMessagesProcessed, 'numberOfBroadcastsProcessed':shared.numberOfBroadcastsProcessed, 'numberOfPubkeysProcessed':shared.numberOfPubkeysProcessed, 'networkStatus':networkStatus, 'softwareName':'PyBitmessage','softwareVersion':shared.softwareVersion}, indent=4, separators=(',', ': '))
elif method == 'decodeAddress':
# Return a meaningful decoding of an address.
if len(params) != 1:
raise APIError(0, 'I need 1 parameter!')
address, = params
status, addressVersion, streamNumber, ripe = decodeAddress(address)
return json.dumps({'status':status, 'addressVersion':addressVersion,
'streamNumber':streamNumber, 'ripe':ripe.encode('base64')}, indent=4,
separators=(',', ': '))
else:
raise APIError(20, 'Invalid method: %s' % method)
def HandleSendMessage(self, params):
if len(params) == 0:
raise APIError(0, 'I need parameters!')
elif len(params) == 4:
toAddress, fromAddress, subject, message = params
encodingType = 2
TTL = 4 * 24 * 60 * 60
elif len(params) == 5:
toAddress, fromAddress, subject, message, encodingType = params
TTL = 4 * 24 * 60 * 60
elif len(params) == 6:
toAddress, fromAddress, subject, message, encodingType, TTL = \
params
if encodingType not in [2, 3]:
raise APIError(6, 'The encoding type must be 2 or 3.')
subject = self._decode(subject, "base64")
message = self._decode(message, "base64")
if len(subject + message) > (2**18 - 500):
raise APIError(27, 'Message is too long.')
if TTL < 60 * 60:
TTL = 60 * 60
if TTL > 28 * 24 * 60 * 60:
TTL = 28 * 24 * 60 * 60
toAddress = addBMIfNotPresent(toAddress)
fromAddress = addBMIfNotPresent(fromAddress)
status, addressVersionNumber, streamNumber, toRipe = \
self._verifyAddress(toAddress)
self._verifyAddress(fromAddress)
try:
fromAddressEnabled = BMConfigParser().getboolean(
fromAddress, 'enabled')
except:
raise APIError(
13, 'Could not find your fromAddress in the keys.dat file.')
if not fromAddressEnabled:
raise APIError(14, 'Your fromAddress is disabled. Cannot send.')
stealthLevel = BMConfigParser().safeGetInt('bitmessagesettings',
'ackstealthlevel')
ackdata = genAckPayload(streamNumber, stealthLevel)
t = (
'',
toAddress,
toRipe,
fromAddress,
subject,
message,
ackdata,
int(time.time()), # sentTime (this won't change)
int(time.time()), # lastActionTime
0,
'msgqueued',
0,
'sent',
2,
TTL)
helper_sent.insert(t)
toLabel = ''
queryreturn = sqlQuery("SELECT label FROM addressbook WHERE address=?",
toAddress)
if queryreturn != []:
for row in queryreturn:
toLabel, = row
# apiSignalQueue.put(('displayNewSentMessage',(toAddress,toLabel,fromAddress,subject,message,ackdata)))
queues.UISignalQueue.put(
('displayNewSentMessage', (toAddress, toLabel, fromAddress,
subject, message, ackdata)))
queues.workerQueue.put(('sendmessage', toAddress))
return hexlify(ackdata)
